# # For a description of the syntax of this configuration file, # see Documentation/kbuild/kconfig-language.txt. # mainmenu "IA-64 Linux Kernel Configuration" source "init/Kconfig" menu "Processor type and features" config IA64 bool default y help The Itanium Processor Family is Intel's 64-bit successor to the 32-bit X86 line. The IA-64 Linux project has a home page at <http://www.linuxia64.org/> and a mailing list at linux-ia64@linuxia64.org. config MMU bool default y config RWSEM_XCHGADD_ALGORITHM bool default y choice prompt "IA-64 processor type" default ITANIUM config ITANIUM bool "Itanium" help Select your IA-64 processor type. The default is Intel Itanium. This choice is safe for all IA-64 systems, but may not perform optimally on systems with, say, Itanium 2 or newer processors. config MCKINLEY bool "Itanium 2" help Select this to configure for an Itanium 2 (McKinley) processor. endchoice choice prompt "IA-64 system type" default IA64_GENERIC config IA64_GENERIC bool "generic" ---help--- This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure a kernel for your specific system, it will be faster and smaller. To find out what type of IA-64 system you have, you may want to check the IA-64 Linux web site at <http://www.linux-ia64.org/>. As of the time of this writing, most hardware is DIG compliant, so the "DIG-compliant" option is usually the right choice. HP-simulator For the HP simulator (<http://software.hp.com/ia64linux/>). HP-zx1 For HP zx1-based systems. SN1-simulator For the SGI SN1 simulator. DIG-compliant For DIG ("Developer's Interface Guide") compliant systems. If you don't know what to do, choose "generic". config IA64_DIG bool "DIG-compliant" config IA64_HP_SIM bool "HP-simulator" config IA64_HP_ZX1 bool "HP-zx1" help Build a kernel that runs on HP zx1-based systems. This adds support for the zx1 I/O MMU and makes root bus bridges appear in PCI config space (required for zx1 agpgart support). config IA64_SGI_SN1 bool "SGI-SN1" config IA64_SGI_SN2 bool "SGI-SN2" endchoice choice prompt "Kernel page size" default IA64_PAGE_SIZE_16KB config IA64_PAGE_SIZE_4KB bool "4KB" ---help--- This lets you select the page size of the kernel. For best IA-64 performance, a page size of 8KB or 16KB is recommended. For best IA-32 compatibility, a page size of 4KB should be selected (the vast majority of IA-32 binaries work perfectly fine with a larger page size). For Itanium 2 or newer systems, a page size of 64KB can also be selected. 4KB For best IA-32 compatibility 8KB For best IA-64 performance 16KB For best IA-64 performance 64KB Requires Itanium 2 or newer processor. If you don't know what to do, choose 16KB. config IA64_PAGE_SIZE_8KB bool "8KB" config IA64_PAGE_SIZE_16KB bool "16KB" config IA64_PAGE_SIZE_64KB depends on !ITANIUM bool "64KB" endchoice config ACPI bool depends on !IA64_HP_SIM default y ---help--- ACPI/OSPM support for Linux is currently under development. As such, this support is preliminary and EXPERIMENTAL. Configuring ACPI support enables kernel interfaces that allow higher level software (OSPM) to manipulate ACPI defined hardware and software interfaces, including the evaluation of ACPI control methods. If unsure, choose N here. Note, this option will enlarge your kernel by about 120K. This support requires an ACPI compliant platform (hardware/firmware). If both ACPI and Advanced Power Management (APM) support are configured, whichever is loaded first shall be used. This code DOES NOT currently provide a complete OSPM implementation -- it has not yet reached APM's level of functionality. When fully implemented, Linux ACPI/OSPM will provide a more robust functional replacement for legacy configuration and power management interfaces, including the Plug-and-Play BIOS specification (PnP BIOS), the Multi-Processor Specification (MPS), and the Advanced Power Management specification (APM). Linux support for ACPI/OSPM is based on Intel Corporation's ACPI Component Architecture (ACPI CA). The latest ACPI CA source code, documentation, debug builds, and implementation status information can be downloaded from: <http://developer.intel.com/technology/iapc/acpi/downloads.htm>. The ACPI Sourceforge project may also be of interest: <http://sf.net/projects/acpi/> config ACPI_EFI bool depends on !IA64_HP_SIM default y config ACPI_INTERPRETER bool depends on !IA64_HP_SIM default y config ACPI_KERNEL_CONFIG bool depends on !IA64_HP_SIM default y help If you say `Y' here, Linux's ACPI support will use the hardware-level system descriptions found on IA-64 systems. config IA64_BRL_EMU bool depends on ITANIUM default y config ITANIUM_BSTEP_SPECIFIC bool "Enable Itanium B-step specific code" depends on ITANIUM help Select this option to build a kernel for an Itanium prototype system with a B-step CPU. You have a B-step CPU if the "revision" field in /proc/cpuinfo has a value in the range from 1 to 4. # align cache-sensitive data to 128 bytes config IA64_L1_CACHE_SHIFT int default "7" if MCKINLEY || ITANIUM && IA64_SGI_SN1 default "6" if ITANIUM && !IA64_SGI_SN1 # align cache-sensitive data to 64 bytes config MCKINLEY_ASTEP_SPECIFIC bool "Enable McKinley A-step specific code" depends on MCKINLEY help Select this option to build a kernel for an IA-64 McKinley prototype system with any A-stepping CPU. config MCKINLEY_A0_SPECIFIC bool "Enable McKinley A0/A1-step specific code" depends on MCKINLEY_ASTEP_SPECIFIC help Select this option to build a kernel for an IA-64 McKinley prototype system with an A0 or A1 stepping CPU. config NUMA bool "Enable NUMA support" if IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 default y if IA64_SGI_SN1 || IA64_SGI_SN2 help Say Y to compile the kernel to support NUMA (Non-Uniform Memory Access). This option is for configuring high-end multiprocessor server systems. If in doubt, say N. choice prompt "Maximum Memory per NUMA Node" if NUMA && IA64_DIG depends on NUMA && IA64_DIG default IA64_NODESIZE_16GB config IA64_NODESIZE_16GB bool "16GB" config IA64_NODESIZE_64GB bool "64GB" config IA64_NODESIZE_256GB bool "256GB" endchoice config DISCONTIGMEM bool depends on IA64_SGI_SN1 || IA64_SGI_SN2 || (IA64_GENERIC || IA64_DIG || IA64_HP_ZX1) && NUMA default y help Say Y to support efficient handling of discontiguous physical memory, for architectures which are either NUMA (Non-Uniform Memory Access) or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. config VIRTUAL_MEM_MAP bool "Enable Virtual Mem Map" depends on !NUMA default y if IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 help Say Y to compile the kernel with support for a virtual mem map. This is an alternate method of supporting large holes in the physical address space on non NUMA machines. Since the DISCONTIGMEM option is not supported on machines with the ZX1 chipset, this is the only way of supporting more than 1 Gb of memory on those machines. This code also only takes effect if a memory hole of greater than 1 Gb is found during boot, so it is safe to enable unless you require the DISCONTIGMEM option for your machine. If you are unsure, say Y. config IA64_MCA bool "Enable IA-64 Machine Check Abort" if IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 default y if IA64_SGI_SN1 || IA64_SGI_SN2 help Say Y here to enable machine check support for IA-64. If you're unsure, answer Y. config PM bool depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 default y ---help--- "Power Management" means that parts of your computer are shut off or put into a power conserving "sleep" mode if they are not being used. There are two competing standards for doing this: APM and ACPI. If you want to use either one, say Y here and then also to the requisite support below. Power Management is most important for battery powered laptop computers; if you have a laptop, check out the Linux Laptop home page on the WWW at <http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the Battery Powered Linux mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>. Note that, even if you say N here, Linux on the x86 architecture will issue the hlt instruction if nothing is to be done, thereby sending the processor to sleep and saving power. config IOSAPIC bool depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 default y config IA64_SGI_SN bool depends on IA64_SGI_SN1 || IA64_SGI_SN2 default y config IA64_SGI_SN_DEBUG bool "Enable extra debugging code" depends on IA64_SGI_SN1 || IA64_SGI_SN2 help Turns on extra debugging code in the SGI SN (Scalable NUMA) platform for IA-64. Unless you are debugging problems on an SGI SN IA-64 box, say N. config IA64_SGI_SN_SIM bool "Enable SGI Medusa Simulator Support" depends on IA64_SGI_SN1 || IA64_SGI_SN2 help If you are compiling a kernel that will run under SGI's IA-64 simulator (Medusa) then say Y, otherwise say N. config IA64_SGI_AUTOTEST bool "Enable autotest (llsc). Option to run cache test instead of booting" depends on IA64_SGI_SN1 || IA64_SGI_SN2 help Build a kernel used for hardware validation. If you include the keyword "autotest" on the boot command line, the kernel does NOT boot. Instead, it starts all cpus and runs cache coherency tests instead. If unsure, say N. config SERIAL_SGI_L1_PROTOCOL bool "Enable protocol mode for the L1 console" depends on IA64_SGI_SN1 || IA64_SGI_SN2 help Uses protocol mode instead of raw mode for the level 1 console on the SGI SN (Scalable NUMA) platform for IA-64. If you are compiling for an SGI SN box then Y is the recommended value, otherwise say N. config PERCPU_IRQ bool depends on IA64_SGI_SN1 || IA64_SGI_SN2 default y config PCIBA tristate "PCIBA support" depends on IA64_SGI_SN1 || IA64_SGI_SN2 help IRIX PCIBA-inspired user mode PCI interface for the SGI SN (Scalable NUMA) platform for IA-64. Unless you are compiling a kernel for an SGI SN IA-64 box, say N. # On IA-64, we always want an ELF /proc/kcore. config KCORE_ELF bool default y ---help--- If you enabled support for /proc file system then the file /proc/kcore will contain the kernel core image. This can be used in gdb: $ cd /usr/src/linux ; gdb vmlinux /proc/kcore You have two choices here: ELF and A.OUT. Selecting ELF will make /proc/kcore appear in ELF core format as defined by the Executable and Linking Format specification. Selecting A.OUT will choose the old "a.out" format which may be necessary for some old versions of binutils or on some architectures. This is especially useful if you have compiled the kernel with the "-g" option to preserve debugging information. It is mainly used for examining kernel data structures on the live kernel so if you don't understand what this means or are not a kernel hacker, just leave it at its default value ELF. config FORCE_MAX_ZONEORDER int default "18" config HUGETLB_PAGE bool "IA-64 Huge TLB Page Support" choice prompt "IA-64 Huge TLB Page Size" depends on HUGETLB_PAGE default HUGETLB_PAGE_SIZE_16MB config HUGETLB_PAGE_SIZE_4GB depends on MCKINLEY bool "4GB" config HUGETLB_PAGE_SIZE_1GB depends on MCKINLEY bool "1GB" config HUGETLB_PAGE_SIZE_256MB bool "256MB" config HUGETLB_PAGE_SIZE_64MB bool "64MB" config HUGETLB_PAGE_SIZE_16MB bool "16MB" config HUGETLB_PAGE_SIZE_4MB bool "4MB" config HUGETLB_PAGE_SIZE_1MB bool "1MB" config HUGETLB_PAGE_SIZE_256KB bool "256KB" endchoice config IA64_PAL_IDLE bool "Use PAL_HALT_LIGHT in idle loop" ---help--- Say Y here to enable use of PAL_HALT_LIGHT in the cpu_idle loop. This allows the CPU to enter a low power state when idle. You can enable CONFIG_IA64_PALINFO and check /proc/pal/cpu0/power_info to see the power consumption and latency for this state. If you're unsure your firmware supports it, answer N. config SMP bool "SMP support" ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU say N. If you have a system with more than one CPU, say Y. If you say N here, the kernel will run on single and multiprocessor systems, but will use only one CPU of a multiprocessor system. If you say Y here, the kernel will run on many, but not all, singleprocessor system. On a singleprocessor system, the kernel will run faster if you say N here. See also the <file:Documentation/smp.tex>, <file:Documentation/smp.txt>, and the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. config PREEMPT bool "Preemptible Kernel" help This option reduces the latency of the kernel when reacting to real-time or interactive events by allowing a low priority process to be preempted even if it is in kernel mode executing a system call. This allows applications to run more reliably even when the system is under load. Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. config IA32_SUPPORT bool "Support running of Linux/x86 binaries" help IA-64 processors can execute IA-32 (X86) instructions. By saying Y here, the kernel will include IA-32 system call emulation support which makes it possible to transparently run IA-32 Linux binaries on an IA-64 Linux system. If in doubt, say Y. config COMPAT bool depends on IA32_SUPPORT default y config PERFMON bool "Performance monitor support" help Selects whether support for the IA-64 performance monitor hardware is included in the kernel. This makes some kernel data-structures a little bigger and slows down execution a bit, but it is generally a good idea to turn this on. If you're unsure, say Y. config IA64_PALINFO tristate "/proc/pal support" help If you say Y here, you are able to get PAL (Processor Abstraction Layer) information in /proc/pal. This contains useful information about the processors in your systems, such as cache and TLB sizes and the PAL firmware version in use. To use this option, you have to ensure that the "/proc file system support" (CONFIG_PROC_FS) is enabled, too. config EFI_VARS tristate "/proc/efi/vars support" help If you say Y here, you are able to get EFI (Extensible Firmware Interface) variable information in /proc/efi/vars. You may read, write, create, and destroy EFI variables through this interface. To use this option, you have to check that the "/proc file system support" (CONFIG_PROC_FS) is enabled, too. config NR_CPUS int "Maximum number of CPUs (2-64)" depends on SMP default "64" config BINFMT_ELF tristate "Kernel support for ELF binaries" ---help--- ELF (Executable and Linkable Format) is a format for libraries and executables used across different architectures and operating systems. Saying Y here will enable your kernel to run ELF binaries. Information about ELF is contained in the ELF HOWTO available from <http://www.tldp.org/docs.html#howto>. config BINFMT_MISC tristate "Kernel support for MISC binaries" ---help--- If you say Y here, it will be possible to plug wrapper-driven binary formats into the kernel. You will like this especially when you use programs that need an interpreter to run like Java, Python or Emacs-Lisp. Once you have registered such a binary class with the kernel, you can start one of those programs simply by typing in its name at a shell prompt; Linux will automatically feed it to the correct interpreter. You can do other nice things, too. Read the file <file:Documentation/binfmt_misc.txt> to learn how to use this feature, and <file:Documentation/java.txt> for information about how to include Java support. You must say Y to "/proc file system support" (CONFIG_PROC_FS) to use this part of the kernel. You may say M here for module support and later load the module when you have use for it; the module is called binfmt_misc. If you don't know what to answer at this point, say Y. if !IA64_HP_SIM source "drivers/acpi/Kconfig" config PCI bool "PCI support" help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or VESA. If you have PCI, say Y, otherwise N. The PCI-HOWTO, available from <http://www.tldp.org/docs.html#howto>, contains valuable information about which PCI hardware does work under Linux and which doesn't. config PCI_DOMAINS bool default PCI source "drivers/pci/Kconfig" config HOTPLUG bool "Support for hot-pluggable devices" ---help--- Say Y here if you want to plug devices into your computer while the system is running, and be able to use them quickly. In many cases, the devices can likewise be unplugged at any time too. One well known example of this is PCMCIA- or PC-cards, credit-card size devices such as network cards, modems or hard drives which are plugged into slots found on all modern laptop computers. Another example, used on modern desktops as well as laptops, is USB. Enable HOTPLUG and KMOD, and build a modular kernel. Get agent software (at <http://linux-hotplug.sourceforge.net/>) and install it. Then your kernel will automatically call out to a user mode "policy agent" (/sbin/hotplug) to load modules and set up software needed to use devices as you hotplug them. source "drivers/pci/hotplug/Kconfig" source "drivers/pcmcia/Kconfig" source "drivers/parport/Kconfig" endif endmenu if !IA64_HP_SIM source "drivers/mtd/Kconfig" source "drivers/pnp/Kconfig" source "drivers/block/Kconfig" source "drivers/ieee1394/Kconfig" source "drivers/message/i2o/Kconfig" source "drivers/md/Kconfig" source "drivers/message/fusion/Kconfig" endif menu "SCSI support" config SCSI tristate "SCSI support" ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know the name of your SCSI host adapter (the card inside your computer that "speaks" the SCSI protocol, also called SCSI controller), because you will be asked for it. You also need to say Y here if you want support for the parallel port version of the 100 MB IOMEGA ZIP drive. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called scsi_mod. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt> and <file:Documentation/scsi/scsi.txt>. However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. source "drivers/scsi/Kconfig" endmenu source "net/Kconfig" if !IA64_HP_SIM source "net/ax25/Kconfig" source "drivers/isdn/Kconfig" menu "CD-ROM drivers (not for SCSI or IDE/ATAPI drives)" config CD_NO_IDESCSI bool "Support non-SCSI/IDE/ATAPI CDROM drives" ---help--- If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y here, otherwise N. Read the CD-ROM-HOWTO, available from <http://www.tldp.org/docs.html#howto>. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all the questions about these CD-ROM drives. If you are unsure what you have, say Y and find out whether you have one of the following drives. For each of these drivers, a file Documentation/cdrom/{driver_name} exists. Especially in cases where you do not know exactly which kind of drive you have you should read there. Most of these drivers use a file drivers/cdrom/{driver_name}.h where you can define your interface parameters and switch some internal goodies. All these CD-ROM drivers are also usable as a module ( = code which can be inserted in and removed from the running kernel whenever you want). If you want to compile them as module, say M instead of Y and read <file:Documentation/modules.txt>. If you want to use any of these CD-ROM drivers, you also have to answer Y or M to "ISO 9660 CD-ROM file system support" below (this answer will get "defaulted" for you if you enable any of the Linux CD-ROM drivers). source "drivers/cdrom/Kconfig" endmenu # # input before char - char/joystick depends on it. As does USB. # source "drivers/input/Kconfig" source "drivers/char/Kconfig" #source drivers/misc/Config.in source "drivers/media/Kconfig" endif menu "Block devices" depends on IA64_HP_SIM config BLK_DEV_LOOP tristate "Loopback device support" config BLK_DEV_NBD tristate "Network block device support" depends on NET config BLK_DEV_RAM tristate "RAM disk support" config BLK_DEV_RAM_SIZE int "Default RAM disk size" depends on BLK_DEV_RAM default "4096" endmenu source "fs/Kconfig" if !IA64_HP_SIM source "drivers/video/Kconfig" menu "Sound" config SOUND tristate "Sound card support" ---help--- If you have a sound card in your computer, i.e. if it can say more than an occasional beep, say Y. Be sure to have all the information about your sound card and its configuration down (I/O port, interrupt and DMA channel), because you will be asked for it. You want to read the Sound-HOWTO, available from <http://www.tldp.org/docs.html#howto>. General information about the modular sound system is contained in the files <file:Documentation/sound/Introduction>. The file <file:Documentation/sound/README.OSS> contains some slightly outdated but still useful information as well. source "sound/Kconfig" endmenu source "drivers/usb/Kconfig" source "lib/Kconfig" source "net/bluetooth/Kconfig" endif source "arch/ia64/hp/sim/Kconfig" menu "Kernel hacking" config FSYS bool "Light-weight system-call support (via epc)" choice prompt "Physical memory granularity" default IA64_GRANULE_64MB config IA64_GRANULE_16MB bool "16MB" help IA-64 identity-mapped regions use a large page size called "granules". Select "16MB" for a small granule size. Select "64MB" for a large granule size. This is the current default. config IA64_GRANULE_64MB bool "64MB" endchoice config DEBUG_KERNEL bool "Kernel debugging" help Say Y here if you are developing drivers or trying to debug and identify kernel problems. config KALLSYMS bool "Load all symbols for debugging/kksymoops" depends on DEBUG_KERNEL help Say Y here to let the kernel print out symbolic crash information and symbolic stack backtraces. This increases the size of the kernel somewhat, as all symbols have to be loaded into the kernel image. config IA64_PRINT_HAZARDS bool "Print possible IA-64 dependency violations to console" depends on DEBUG_KERNEL help Selecting this option prints more information for Illegal Dependency Faults, that is, for Read-after-Write (RAW), Write-after-Write (WAW), or Write-after-Read (WAR) violations. This option is ignored if you are compiling for an Itanium A step processor (CONFIG_ITANIUM_ASTEP_SPECIFIC). If you're unsure, select Y. config DISABLE_VHPT bool "Disable VHPT" depends on DEBUG_KERNEL help The Virtual Hash Page Table (VHPT) enhances virtual address translation performance. Normally you want the VHPT active but you can select this option to disable the VHPT for debugging. If you're unsure, answer N. config MAGIC_SYSRQ bool "Magic SysRq key" depends on DEBUG_KERNEL help If you say Y here, you will have some control over the system even if the system crashes for example during kernel debugging (e.g., you will be able to flush the buffer cache to disk, reboot the system immediately or dump some status information). This is accomplished by pressing various keys while holding SysRq (Alt+PrintScreen). It also works on a serial console (on PC hardware at least), if you send a BREAK and then within 5 seconds a command keypress. The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y unless you really know what this hack does. config IA64_EARLY_PRINTK bool "Early printk support" depends on DEBUG_KERNEL help Selecting this option uses the VGA screen or serial console for printk() output before the consoles are initialised. It is useful for debugging problems early in the boot process, but only if you have a suitable VGA/serial console attached. If you're unsure, select N. config IA64_EARLY_PRINTK_UART bool "Early printk on MMIO serial port" depends on IA64_EARLY_PRINTK config IA64_EARLY_PRINTK_UART_BASE hex "UART MMIO base address" depends on IA64_EARLY_PRINTK_UART default "ff5e0000" config IA64_EARLY_PRINTK_VGA bool "Early printk on VGA" depends on IA64_EARLY_PRINTK config DEBUG_SLAB bool "Debug memory allocations" depends on DEBUG_KERNEL help Say Y here to have the kernel do limited verification on memory allocation as well as poisoning memory on free to catch use of freed memory. config DEBUG_SPINLOCK bool "Spinlock debugging" depends on DEBUG_KERNEL help Say Y here and build SMP to catch missing spinlock initialization and certain other kinds of spinlock errors commonly made. This is best used in conjunction with the NMI watchdog so that spinlock deadlocks are also debuggable. config DEBUG_SPINLOCK_SLEEP bool "Sleep-inside-spinlock checking" help If you say Y here, various routines which may sleep will become very noisy if they are called with a spinlock held. config IA64_DEBUG_CMPXCHG bool "Turn on compare-and-exchange bug checking (slow!)" depends on DEBUG_KERNEL help Selecting this option turns on bug checking for the IA-64 compare-and-exchange instructions. This is slow! Itaniums from step B3 or later don't have this problem. If you're unsure, select N. config IA64_DEBUG_IRQ bool "Turn on irq debug checks (slow!)" depends on DEBUG_KERNEL help Selecting this option turns on bug checking for the IA-64 irq_save and restore instructions. It's useful for tracking down spinlock problems, but slow! If you're unsure, select N. endmenu source "security/Kconfig" source "crypto/Kconfig"