/* * Samsung's Exynos4210 based Origen board device tree source * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * Copyright (c) 2010-2011 Linaro Ltd. * www.linaro.org * * Device tree source file for Insignal's Origen board which is based on * Samsung's Exynos4210 SoC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /dts-v1/; #include "exynos4210.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; compatible = "insignal,origen", "samsung,exynos4210"; memory { reg = <0x40000000 0x10000000 0x50000000 0x10000000 0x60000000 0x10000000 0x70000000 0x10000000>; }; chosen { bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; mmc_reg: voltage-regulator { compatible = "regulator-fixed"; regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; gpio = <&gpx1 1 0>; enable-active-high; }; tmu@100C0000 { status = "okay"; }; sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; pinctrl-names = "default"; vmmc-supply = <&mmc_reg>; status = "okay"; }; sdhci@12510000 { bus-width = <4>; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; pinctrl-names = "default"; vmmc-supply = <&mmc_reg>; status = "okay"; }; g2d@12800000 { status = "okay"; }; codec@13400000 { samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; status = "okay"; }; serial@13800000 { status = "okay"; }; serial@13810000 { status = "okay"; }; serial@13820000 { status = "okay"; }; serial@13830000 { status = "okay"; }; i2c@13860000 { status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; max8997_pmic@66 { compatible = "maxim,max8997-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; interrupts = <4 0>, <3 0>; max8997,pmic-buck1-dvs-voltage = <1350000>; max8997,pmic-buck2-dvs-voltage = <1100000>; max8997,pmic-buck5-dvs-voltage = <1200000>; regulators { ldo1_reg: LDO1 { regulator-name = "VDD_ABB_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo2_reg: LDO2 { regulator-name = "VDD_ALIVE_1.1V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; ldo3_reg: LDO3 { regulator-name = "VMIPI_1.1V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; ldo4_reg: LDO4 { regulator-name = "VDD_RTC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo6_reg: LDO6 { regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo7_reg: LDO7 { regulator-name = "VDD_AUD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo8_reg: LDO8 { regulator-name = "VADC_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo9_reg: LDO9 { regulator-name = "DVDD_SWB_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; ldo10_reg: LDO10 { regulator-name = "VDD_PLL_1.1V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; ldo11_reg: LDO11 { regulator-name = "VDD_AUD_3V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; ldo14_reg: LDO14 { regulator-name = "AVDD18_SWB_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo17_reg: LDO17 { regulator-name = "VDD_SWB_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; ldo21_reg: LDO21 { regulator-name = "VDD_MIF_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; buck1_reg: BUCK1 { /* * HACK: The real name is VDD_ARM_1.2V, * but exynos-cpufreq does not support * DT-based regulator lookup yet. */ regulator-name = "vdd_arm"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; buck2_reg: BUCK2 { regulator-name = "VDD_INT_1.1V"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; }; buck3_reg: BUCK3 { regulator-name = "VDD_G3D_1.1V"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1100000>; }; buck5_reg: BUCK5 { regulator-name = "VDDQ_M1M2_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; buck7_reg: BUCK7 { regulator-name = "VDD_LCD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; }; }; }; gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; up { label = "Up"; gpios = <&gpx2 0 1>; linux,code = <103>; gpio-key,wakeup; }; down { label = "Down"; gpios = <&gpx2 1 1>; linux,code = <108>; gpio-key,wakeup; }; back { label = "Back"; gpios = <&gpx1 7 1>; linux,code = <158>; gpio-key,wakeup; }; home { label = "Home"; gpios = <&gpx1 6 1>; linux,code = <102>; gpio-key,wakeup; }; menu { label = "Menu"; gpios = <&gpx1 5 1>; linux,code = <139>; gpio-key,wakeup; }; }; leds { compatible = "gpio-leds"; status { gpios = <&gpx1 3 1>; linux,default-trigger = "heartbeat"; }; }; fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; clock-frequency = <0>; }; xusbxti { compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; }; fimd@11c00000 { pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; pinctrl-names = "default"; status = "okay"; }; display-timings { native-mode = <&timing0>; timing0: timing { clock-frequency = <50000>; hactive = <1024>; vactive = <600>; hfront-porch = <64>; hback-porch = <16>; hsync-len = <48>; vback-porch = <64>; vfront-porch = <16>; vsync-len = <3>; }; }; };