# # Platform drivers # Most drivers here are currently for webcam support menuconfig V4L_PLATFORM_DRIVERS bool "V4L platform devices" depends on MEDIA_CAMERA_SUPPORT default n ---help--- Say Y here to enable support for platform-specific V4L drivers. if V4L_PLATFORM_DRIVERS source "drivers/media/platform/marvell-ccic/Kconfig" config VIDEO_VIA_CAMERA tristate "VIAFB camera controller support" depends on FB_VIA select VIDEOBUF_DMA_SG select VIDEO_OV7670 help Driver support for the integrated camera controller in VIA Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems with ov7670 sensors. # # Platform multimedia device configuration # source "drivers/media/platform/davinci/Kconfig" source "drivers/media/platform/omap/Kconfig" source "drivers/media/platform/blackfin/Kconfig" config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on MEDIA_CAMERA_SUPPORT depends on VIDEO_DEV && I2C && HAS_DMA depends on ARCH_SHMOBILE || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG help Support for the Video Output Unit (VOU) on SuperH SoCs. config VIDEO_VIU tristate "Freescale VIU Video Driver" depends on VIDEO_V4L2 && PPC_MPC512x select VIDEOBUF_DMA_CONTIG default y ---help--- Support for Freescale VIU video driver. This device captures video data, or overlays video on DIU frame buffer. Say Y here if you want to enable VIU device on MPC5121e Rev2+. In doubt, say N. config VIDEO_M32R_AR tristate "AR devices" depends on VIDEO_V4L2 depends on M32R || COMPILE_TEST ---help--- This is a video4linux driver for the Renesas AR (Artificial Retina) camera module. config VIDEO_M32R_AR_M64278 tristate "AR device with color module M64278(VGA)" depends on PLAT_M32700UT select VIDEO_M32R_AR ---help--- This is a video4linux driver for the Renesas AR (Artificial Retina) with M64278E-800 camera module. This module supports VGA(640x480 pixels) resolutions. To compile this driver as a module, choose M here: the module will be called arv. config VIDEO_OMAP3 tristate "OMAP 3 Camera support" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 depends on HAS_DMA && OF depends on OMAP_IOMMU select ARM_DMA_USE_IOMMU select VIDEOBUF2_DMA_CONTIG select MFD_SYSCON ---help--- Driver for an OMAP 3 camera controller. config VIDEO_OMAP3_DEBUG bool "OMAP 3 Camera debug messages" depends on VIDEO_OMAP3 ---help--- Enable debug messages on OMAP 3 camera controller driver. config VIDEO_PXA27x tristate "PXA27x Quick Capture Interface driver" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA depends on PXA27x || COMPILE_TEST select VIDEOBUF2_DMA_SG select SG_SPLIT ---help--- This is a v4l2 driver for the PXA27x Quick Capture Interface config VIDEO_S3C_CAMIF tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API depends on PM depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG ---help--- This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera host interface (CAMIF). To compile this driver as a module, choose M here: the module will be called s3c-camif. source "drivers/media/platform/soc_camera/Kconfig" source "drivers/media/platform/exynos4-is/Kconfig" source "drivers/media/platform/am437x/Kconfig" source "drivers/media/platform/xilinx/Kconfig" source "drivers/media/platform/rcar-vin/Kconfig" source "drivers/media/platform/atmel/Kconfig" config VIDEO_TI_CAL tristate "TI CAL (Camera Adaptation Layer) driver" depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on SOC_DRA7XX || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG default n ---help--- Support for the TI CAL (Camera Adaptation Layer) block found on DRA72X SoC. In TI Technical Reference Manual this module is referred as Camera Interface Subsystem (CAMSS). endif # V4L_PLATFORM_DRIVERS menuconfig V4L_MEM2MEM_DRIVERS bool "Memory-to-memory multimedia devices" depends on VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT default n ---help--- Say Y here to enable selecting drivers for V4L devices that use system memory for both source and destination buffers, as opposed to capture and output drivers, which use memory buffers for just one of those. if V4L_MEM2MEM_DRIVERS config VIDEO_CODA tristate "Chips&Media Coda multi-standard codec IP" depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC depends on HAS_DMA select SRAM select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV select GENERIC_ALLOCATOR ---help--- Coda is a range of video codec IPs that supports H.264, MPEG-4, and other video formats. config VIDEO_MEDIATEK_VPU tristate "Mediatek Video Processor Unit" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA depends on ARCH_MEDIATEK || COMPILE_TEST ---help--- This driver provides downloading VPU firmware and communicating with VPU. This driver for hw video codec embedded in Mediatek's MT8173 SOCs. It is able to handle video decoding/encoding in a range of formats. To compile this driver as a module, choose M here: the module will be called mtk-vpu. config VIDEO_MEDIATEK_MDP tristate "Mediatek MDP driver" depends on MTK_IOMMU || COMPILE_TEST depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV select VIDEO_MEDIATEK_VPU default n ---help--- It is a v4l2 driver and present in Mediatek MT8173 SoCs. The driver supports for scaling and color space conversion. To compile this driver as a module, choose M here: the module will be called mtk-mdp. config VIDEO_MEDIATEK_VCODEC tristate "Mediatek Video Codec driver" depends on MTK_IOMMU || COMPILE_TEST depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA depends on ARCH_MEDIATEK || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV select VIDEO_MEDIATEK_VPU default n ---help--- Mediatek video codec driver provides HW capability to encode and decode in a range of video formats This driver rely on VPU driver to communicate with VPU. To compile this driver as a module, choose M here: the module will be called mtk-vcodec config VIDEO_MEM2MEM_DEINTERLACE tristate "Deinterlace support" depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help Generic deinterlacing V4L2 driver. config VIDEO_SAMSUNG_S5P_G2D tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV default n ---help--- This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D 2d graphics accelerator. config VIDEO_SAMSUNG_S5P_JPEG tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV ---help--- This is a v4l2 driver for Samsung S5P, EXYNOS3250 and EXYNOS4 JPEG codec config VIDEO_SAMSUNG_S5P_MFC tristate "Samsung S5P MFC Video Codec" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG default n help MFC 5.1 and 6.x driver for V4L2 config VIDEO_MX2_EMMAPRP tristate "MX2 eMMa-PrP support" depends on VIDEO_DEV && VIDEO_V4L2 depends on SOC_IMX27 || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help MX2X chips have a PrP that can be used to process buffers from memory to memory. Operations include resizing and format conversion. config VIDEO_SAMSUNG_EXYNOS_GSC tristate "Samsung Exynos G-Scaler driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_EXYNOS || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. config VIDEO_STI_BDISP tristate "STMicroelectronics BDISP 2D blitter driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on HAS_DMA depends on ARCH_STI || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC. config VIDEO_STI_HVA tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on HAS_DMA depends on ARCH_STI || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help This V4L2 driver enables HVA (Hardware Video Accelerator) multi-format video encoder of STMicroelectronics SoC, allowing hardware encoding of raw uncompressed formats in various compressed video bitstreams format. To compile this driver as a module, choose M here: the module will be called st-hva. config VIDEO_SH_VEU tristate "SuperH VEU mem2mem video processing driver" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help Support for the Video Engine Unit (VEU) on SuperH and SH-Mobile SoCs. config VIDEO_RENESAS_FDP1 tristate "Renesas Fine Display Processor" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA depends on ARCH_SHMOBILE || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV ---help--- This is a V4L2 driver for the Renesas Fine Display Processor providing colour space conversion, and de-interlacing features. To compile this driver as a module, choose M here: the module will be called rcar_fdp1. config VIDEO_RENESAS_JPU tristate "Renesas JPEG Processing Unit" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA depends on ARCH_RENESAS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV ---help--- This is a V4L2 driver for the Renesas JPEG Processing Unit. To compile this driver as a module, choose M here: the module will be called rcar_jpu. config VIDEO_RENESAS_FCP tristate "Renesas Frame Compression Processor" depends on ARCH_RENESAS || COMPILE_TEST depends on OF ---help--- This is a driver for the Renesas Frame Compression Processor (FCP). The FCP is a companion module of video processing modules in the Renesas R-Car Gen3 SoCs. It handles memory access for the codec, VSP and FDP modules. To compile this driver as a module, choose M here: the module will be called rcar-fcp. config VIDEO_RENESAS_VSP1 tristate "Renesas VSP1 Video Processing Engine" depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA depends on (ARCH_RENESAS && OF) || COMPILE_TEST depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP select VIDEOBUF2_DMA_CONTIG ---help--- This is a V4L2 driver for the Renesas VSP1 video processing engine. To compile this driver as a module, choose M here: the module will be called vsp1. config VIDEO_TI_VPE tristate "TI VPE (Video Processing Engine) driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on SOC_DRA7XX || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV select VIDEO_TI_VPDMA default n ---help--- Support for the TI VPE(Video Processing Engine) block found on DRA7XX SoC. config VIDEO_TI_VPE_DEBUG bool "VPE debug messages" depends on VIDEO_TI_VPE ---help--- Enable debug messages on VPE driver. endif # V4L_MEM2MEM_DRIVERS # TI VIDEO PORT Helper Modules # These will be selected by VPE and VIP config VIDEO_TI_VPDMA tristate menuconfig V4L_TEST_DRIVERS bool "Media test drivers" depends on MEDIA_CAMERA_SUPPORT if V4L_TEST_DRIVERS source "drivers/media/platform/vivid/Kconfig" config VIDEO_VIM2M tristate "Virtual Memory-to-Memory Driver" depends on VIDEO_DEV && VIDEO_V4L2 select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV default n ---help--- This is a virtual test device for the memory-to-memory driver framework. endif #V4L_TEST_DRIVERS menuconfig DVB_PLATFORM_DRIVERS bool "DVB platform devices" depends on MEDIA_DIGITAL_TV_SUPPORT default n ---help--- Say Y here to enable support for platform-specific Digital TV drivers. if DVB_PLATFORM_DRIVERS source "drivers/media/platform/sti/c8sectpfe/Kconfig" endif #DVB_PLATFORM_DRIVERS