Skip to content

M
MariaDB
Commit 1e26e74c authored by Kristofer Pettersson's avatar Kristofer Pettersson
Browse files
Options

Automerge

parents 153e8e7c 1d583e50
Hide whitespace changes
Inline Side-by-side
Showing with 136529 additions and 17534 deletions
mysql-test/extra/binlog_tests/innodb_stat.test
View file @ 1e26e74c
......@@ -7,6 +7,7 @@
# Actually this test has nothing to do with innodb per se, it just requires
# transactional table.
#
flush status;
show status like "binlog_cache_use";
show status like "binlog_cache_disk_use";
--disable_warnings
......@@ -38,13 +39,3 @@ commit;
show status like "binlog_cache_use";
show status like "binlog_cache_disk_use";
drop table t1;
# Test for testable InnoDB status variables. This test
# uses previous ones(pages_created, rows_deleted, ...).
-- replace_regex /51[12]/51_/
show status like "Innodb_buffer_pool_pages_total";
show status like "Innodb_page_size";
show status like "Innodb_rows_deleted";
show status like "Innodb_rows_inserted";
show status like "Innodb_rows_updated";
mysql-test/lib/mtr_cases.pl
View file @ 1e26e74c
......@@ -433,41 +433,51 @@ sub optimize_cases {
# Skip processing if already marked as skipped
next if $tinfo->{skip};
# Replication test needs an adjustment of binlog format
if (mtr_match_prefix($tinfo->{'name'}, "rpl"))
# =======================================================
# If a special binlog format was selected with
# --mysqld=--binlog-format=x, skip all test that does not
# support it
# =======================================================
#print "used_binlog_format: $::used_binlog_format\n";
if (defined $::used_binlog_format )
{
# =======================================================
# Get binlog-format used by this test from master_opt
# Fixed --binlog-format=x specified on command line
# =======================================================
my $test_binlog_format;
foreach my $opt ( @{$tinfo->{master_opt}} ) {
$test_binlog_format= $test_binlog_format ||
mtr_match_prefix($opt, "--binlog-format=");
}
# print $tinfo->{name}." uses ".$test_binlog_format."\n";
if ( defined $tinfo->{'binlog_formats'} )
{
#print "binlog_formats: ". join(", ", @{$tinfo->{binlog_formats}})."\n";
# The test supports different binlog formats
# check if the selected one is ok
my $supported=
grep { $_ eq $::used_binlog_format } @{$tinfo->{'binlog_formats'}};
if ( !$supported )
{
$tinfo->{'skip'}= 1;
$tinfo->{'comment'}=
"Doesn't support --binlog-format='$::used_binlog_format'";
}
}
}
else
{
# =======================================================
# If a special binlog format was selected with
# --mysqld=--binlog-format=x, skip all test with different
# binlog-format
# Use dynamic switching of binlog format
# =======================================================
if (defined $::used_binlog_format and
$test_binlog_format and
$::used_binlog_format ne $test_binlog_format)
{
$tinfo->{'skip'}= 1;
$tinfo->{'comment'}= "Requires --binlog-format='$test_binlog_format'";
next;
# Get binlog-format used by this test from master_opt
my $test_binlog_format;
foreach my $opt ( @{$tinfo->{master_opt}} ) {
$test_binlog_format=
mtr_match_prefix($opt, "--binlog-format=") || $test_binlog_format;
}
# =======================================================
# Check that testcase supports the designated binlog-format
# =======================================================
if ($test_binlog_format and defined $tinfo->{'sup_binlog_formats'} )
if (defined $test_binlog_format and
defined $tinfo->{binlog_formats} )
{
my $supported=
grep { $_ eq $test_binlog_format } @{$tinfo->{'sup_binlog_formats'}};
grep { $_ eq $test_binlog_format } @{$tinfo->{'binlog_formats'}};
if ( !$supported )
{
$tinfo->{'skip'}= 1;
......@@ -476,20 +486,8 @@ sub optimize_cases {
next;
}
}
# =======================================================
# Use dynamic switching of binlog-format if mtr started
# w/o --mysqld=--binlog-format=xxx and combinations.
# =======================================================
if (!defined $tinfo->{'combination'} and
!defined $::used_binlog_format)
{
$test_binlog_format= $tinfo->{'sup_binlog_formats'}->[0];
}
# Save binlog format for dynamic switching
$tinfo->{binlog_format}= $test_binlog_format;
}
}
}
......@@ -879,18 +877,19 @@ sub collect_one_test_case($$$$$$$$$) {
# the specified value in "tinfo"
our @tags=
(
["include/have_innodb.inc", "innodb_test", 1],
["include/have_binlog_format_row.inc", "sup_binlog_formats", ["row"]],
["include/have_log_bin.inc", "need_binlog", 1],
["include/have_binlog_format_statement.inc",
"sup_binlog_formats", ["statement"]],
["include/have_binlog_format_mixed.inc", "sup_binlog_formats", ["mixed"]],
["include/have_binlog_format_row.inc", "binlog_formats", ["row"]],
["include/have_binlog_format_statement.inc", "binlog_formats", ["statement"]],
["include/have_binlog_format_mixed.inc", "binlog_formats", ["mixed"]],
["include/have_binlog_format_mixed_or_row.inc",
"sup_binlog_formats", ["mixed","row"]],
"binlog_formats", ["mixed", "row"]],
["include/have_binlog_format_mixed_or_statement.inc",
"sup_binlog_formats", ["mixed","statement"]],
"binlog_formats", ["mixed", "statement"]],
["include/have_binlog_format_row_or_statement.inc",
"sup_binlog_formats", ["row","statement"]],
"binlog_formats", ["row", "statement"]],
["include/have_innodb.inc", "innodb_test", 1],
["include/have_log_bin.inc", "need_binlog", 1],
["include/big_test.inc", "big_test", 1],
["include/have_debug.inc", "need_debug", 1],
["include/have_ndb.inc", "ndb_test", 1],
......
mysql-test/mysql-test-run.pl
View file @ 1e26e74c
......@@ -4357,19 +4357,10 @@ sub run_testcase_need_master_restart($)
elsif (! mtr_same_opts($master->[0]->{'start_opts'},
$tinfo->{'master_opt'}) )
{
# Chech that diff is binlog format only
my $diff_opts= mtr_diff_opts($master->[0]->{'start_opts'},$tinfo->{'master_opt'});
if (scalar(@$diff_opts) eq 2)
{
$do_restart= 1 unless ($diff_opts->[0] =~/^--binlog-format=/ and $diff_opts->[1] =~/^--binlog-format=/);
}
else
{
$do_restart= 1;
mtr_verbose("Restart master: running with different options '" .
join(" ", @{$tinfo->{'master_opt'}}) . "' != '" .
$do_restart= 1;
mtr_verbose("Restart master: running with different options '" .
join(" ", @{$tinfo->{'master_opt'}}) . "' != '" .
join(" ", @{$master->[0]->{'start_opts'}}) . "'" );
}
}
elsif( ! $master->[0]->{'pid'} )
{
......
mysql-test/suite/binlog/r/binlog_mix_innodb_stat.result
View file @ 1e26e74c
flush status;
show status like "binlog_cache_use";
Variable_name Value
Binlog_cache_use 0
......@@ -22,18 +23,3 @@ show status like "binlog_cache_disk_use";
Variable_name Value
Binlog_cache_disk_use 1
drop table t1;
show status like "Innodb_buffer_pool_pages_total";
Variable_name Value
Innodb_buffer_pool_pages_total 51_
show status like "Innodb_page_size";
Variable_name Value
Innodb_page_size 16384
show status like "Innodb_rows_deleted";
Variable_name Value
Innodb_rows_deleted 2000
show status like "Innodb_rows_inserted";
Variable_name Value
Innodb_rows_inserted 2000
show status like "Innodb_rows_updated";
Variable_name Value
Innodb_rows_updated 0
mysql-test/suite/binlog/r/binlog_row_innodb_stat.result
View file @ 1e26e74c
flush status;
show status like "binlog_cache_use";
Variable_name Value
Binlog_cache_use 0
......@@ -22,18 +23,3 @@ show status like "binlog_cache_disk_use";
Variable_name Value
Binlog_cache_disk_use 1
drop table t1;
show status like "Innodb_buffer_pool_pages_total";
Variable_name Value
Innodb_buffer_pool_pages_total 51_
show status like "Innodb_page_size";
Variable_name Value
Innodb_page_size 16384
show status like "Innodb_rows_deleted";
Variable_name Value
Innodb_rows_deleted 2000
show status like "Innodb_rows_inserted";
Variable_name Value
Innodb_rows_inserted 2000
show status like "Innodb_rows_updated";
Variable_name Value
Innodb_rows_updated 0
mysql-test/suite/binlog/r/binlog_stm_innodb_stat.result
View file @ 1e26e74c
flush status;
show status like "binlog_cache_use";
Variable_name Value
Binlog_cache_use 0
......@@ -22,18 +23,3 @@ show status like "binlog_cache_disk_use";
Variable_name Value
Binlog_cache_disk_use 1
drop table t1;
show status like "Innodb_buffer_pool_pages_total";
Variable_name Value
Innodb_buffer_pool_pages_total 51_
show status like "Innodb_page_size";
Variable_name Value
Innodb_page_size 16384
show status like "Innodb_rows_deleted";
Variable_name Value
Innodb_rows_deleted 2000
show status like "Innodb_rows_inserted";
Variable_name Value
Innodb_rows_inserted 2000
show status like "Innodb_rows_updated";
Variable_name Value
Innodb_rows_updated 0
mysql-test/suite/parts/inc/partition_alter2.inc → mysql-test/suite/parts/inc/partition_alter2_1.inc
View file @ 1e26e74c
################################################################################
# inc/partition_alter2.inc #
# inc/partition_alter2_1.inc #
# #
# Purpose: #
# Tests where the columns used within the partitioning function are altered. #
# This routine is only useful for the partition_<feature>_<engine> tests. .#
# Part 1: increasing size of column
# #
#------------------------------------------------------------------------------#
# Original Author: mleich #
# Original Date: 2006-03-05 #
# Change Author: #
# Change Date: #
# Change: #
# Change Author: MattiasJ #
# Change Date: 2008-09-08 #
# Change: Splitted the test in two different parts (increasing/decreasing col) #
################################################################################
--echo
......@@ -140,133 +141,6 @@ let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
--echo
--echo #========================================================================
--echo # 2 Decrease the size of the column used in the partitioning
--echo # function and/or PRIMARY KEY and/or UNIQUE INDEX
--echo #========================================================================
--echo #------------------------------------------------------------------------
--echo # 2.1 ALTER column f_int2 not used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: Only f_int1 is used within the partitioning function
# ---> inc/partition_alter_11.inc
let $alter= ALTER TABLE t1 MODIFY f_int2 MEDIUMINT;
--echo # 2.1.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
#
if ($do_pk_tests)
{
# The value of the direct following test is maybe covered by the test with
# the PRIMARY KEY containing two columns.
if ($more_pk_ui_tests)
{
--echo # 2.1.2 PRIMARY KEY exists
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
#
--echo # 2.1.3 UNIQUE INDEX exists
# The value of the direct following test is maybe covered by the test with
# the UNIQUE INDEX containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , UNIQUE INDEX uidx1 (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , UNIQUE INDEX uidx1 (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , UNIQUE INDEX uidx1 (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
#
if ($more_pk_ui_tests)
{
# The value of the tests 2.2 is maybe covered by the tests 2.3
--echo #------------------------------------------------------------------------
--echo # 2.2 ALTER column f_int1 used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: Only f_int1 is used within the partitioning function
# ---> inc/partition_alter_11.inc
let $alter= ALTER TABLE t1 MODIFY f_int1 MEDIUMINT;
--echo # 2.2.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if ($do_pk_tests)
{
--echo # 2.2.2 PRIMARY KEY exists
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo # 2.2.3 UNIQUE INDEX exists
let $unique= , UNIQUE INDEX uidx (f_int1);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , UNIQUE INDEX uidx (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo #------------------------------------------------------------------------
--echo # 2.3 ALTER column f_int1 and f_int2 used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: f_int1 and f_int2 is used within the partitioning function
# ---> inc/partition_alter_13.inc
let $alter= ALTER TABLE t1 MODIFY f_int1 MEDIUMINT, MODIFY f_int2 MEDIUMINT;
--echo # 2.3.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if ($do_pk_tests)
{
--echo # 2.3.2 PRIMARY KEY exists
# The value of the direct following test is maybe covered by the test with
# the PRIMARY KEY containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo # 2.3.3 UNIQUE INDEX exists
# The value of the direct following test is maybe covered by the test with
# the UNIQUE INDEX containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , UNIQUE INDEX uidx (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , UNIQUE INDEX uidx (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if (0)
{
--echo
......
mysql-test/suite/parts/inc/partition_alter2_2.inc 0 → 100644
View file @ 1e26e74c
################################################################################
# inc/partition_alter2_2.inc #
# #
# Purpose: #
# Tests where the columns used within the partitioning function are altered. #
# This routine is only useful for the partition_<feature>_<engine> tests. .#
# Part 2: decreasing size of column
# #
#------------------------------------------------------------------------------#
# Original Author: mleich #
# Original Date: 2006-03-05 #
# Change Author: MattiasJ #
# Change Date: 2008-09-08 #
# Change: Splitted the test in two different parts (increasing/decreasing col) #
################################################################################
--echo
--echo #========================================================================
--echo # 2 Decrease the size of the column used in the partitioning
--echo # function and/or PRIMARY KEY and/or UNIQUE INDEX
--echo #========================================================================
--echo #------------------------------------------------------------------------
--echo # 2.1 ALTER column f_int2 not used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: Only f_int1 is used within the partitioning function
# ---> inc/partition_alter_11.inc
let $alter= ALTER TABLE t1 MODIFY f_int2 MEDIUMINT;
--echo # 2.1.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
#
if ($do_pk_tests)
{
# The value of the direct following test is maybe covered by the test with
# the PRIMARY KEY containing two columns.
if ($more_pk_ui_tests)
{
--echo # 2.1.2 PRIMARY KEY exists
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
#
--echo # 2.1.3 UNIQUE INDEX exists
# The value of the direct following test is maybe covered by the test with
# the UNIQUE INDEX containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , UNIQUE INDEX uidx1 (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , UNIQUE INDEX uidx1 (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , UNIQUE INDEX uidx1 (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
#
if ($more_pk_ui_tests)
{
# The value of the tests 2.2 is maybe covered by the tests 2.3
--echo #------------------------------------------------------------------------
--echo # 2.2 ALTER column f_int1 used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: Only f_int1 is used within the partitioning function
# ---> inc/partition_alter_11.inc
let $alter= ALTER TABLE t1 MODIFY f_int1 MEDIUMINT;
--echo # 2.2.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if ($do_pk_tests)
{
--echo # 2.2.2 PRIMARY KEY exists
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo # 2.2.3 UNIQUE INDEX exists
let $unique= , UNIQUE INDEX uidx (f_int1);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , UNIQUE INDEX uidx (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo #------------------------------------------------------------------------
--echo # 2.3 ALTER column f_int1 and f_int2 used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: f_int1 and f_int2 is used within the partitioning function
# ---> inc/partition_alter_13.inc
let $alter= ALTER TABLE t1 MODIFY f_int1 MEDIUMINT, MODIFY f_int2 MEDIUMINT;
--echo # 2.3.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if ($do_pk_tests)
{
--echo # 2.3.2 PRIMARY KEY exists
# The value of the direct following test is maybe covered by the test with
# the PRIMARY KEY containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo # 2.3.3 UNIQUE INDEX exists
# The value of the direct following test is maybe covered by the test with
# the UNIQUE INDEX containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , UNIQUE INDEX uidx (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , UNIQUE INDEX uidx (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if (0)
{
--echo
--echo #========================================================================
--echo # 3 ALTER the type of the column used in the partitioning
--echo # function and/or PRIMARY KEY and/or UNIQUE INDEX
--echo # INTEGER --> FLOAT
--echo # INTEGER --> DECIMAL
--echo # INTEGER --> VARCHAR
--echo # mleich: I assume that at least the first two variants are of
--echo # some interest. But I am unsure if the server allows such
--echo # conversions. I also think that such operations have a
--echo # conversions very small likelihood.
--echo # To be implemented.
--echo #========================================================================
}
mysql-test/suite/parts/r/partition_alter2_1_myisam.result 0 → 100644
View file @ 1e26e74c
This source diff could not be displayed because it is too large. You can view the blob instead.
mysql-test/suite/parts/r/partition_alter2_2_myisam.result 0 → 100644
View file @ 1e26e74c
This source diff could not be displayed because it is too large. You can view the blob instead.
mysql-test/suite/parts/t/disabled.def
View file @ 1e26e74c
partition_alter2_ndb : Bug#18735 Not supported
partition_basic_ndb : Bug#19899 Crashing the server
# http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster-limitations-syntax.html
partition_bit_ndb : NDB does not support bit column in index
......
mysql-test/suite/parts/t/partition_alter2_innodb.test → mysql-test/suite/parts/t/partition_alter2_1_innodb.test
View file @ 1e26e74c
################################################################################
# t/partition_alter2_innodb.test #
# t/partition_alter2_1_innodb.test #
# #
# Purpose: #
# Tests around Alter column used in partitioning function #
......@@ -70,7 +70,7 @@ let $MAX_VALUE= (2147483646);
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_alter2.inc
--source suite/parts/inc/partition_alter2_1.inc
#------------------------------------------------------------------------------#
# Execute storage engine specific tests
......
mysql-test/suite/parts/t/partition_alter2_myisam.test → mysql-test/suite/parts/t/partition_alter2_1_myisam.test
View file @ 1e26e74c
################################################################################
# t/partition_alter2_myisam.test #
# t/partition_alter2_1_myisam.test #
# #
# Purpose: #
# Tests around Alter column used in partitioning function #
......@@ -69,7 +69,7 @@ let $MAX_VALUE= (2147483646);
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_alter2.inc
--source suite/parts/inc/partition_alter2_1.inc
#------------------------------------------------------------------------------#
# Execute storage engine specific tests
......
mysql-test/suite/parts/t/partition_alter2_ndb.test → mysql-test/suite/parts/t/partition_alter2_2_innodb.test
View file @ 1e26e74c
################################################################################
# t/partition_alter2_ndb.test #
# t/partition_alter2_2_innodb.test #
# #
# Purpose: #
# Tests around Alter column used in partitioning function #
# NDB branch #
# InnoDB branch #
# #
#------------------------------------------------------------------------------#
# Original Author: mleich #
......@@ -14,7 +14,7 @@
################################################################################
#
# NOTE: PLEASE DO NOT ADD NOT NDB SPECIFIC TESTCASES HERE !
# NOTE: PLEASE DO NOT ADD NOT INNODB SPECIFIC TESTCASES HERE !
# TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
# THE SOURCED FILES ONLY.
#
......@@ -40,35 +40,26 @@ SET @max_row = 20;
let $more_trigger_tests= 0;
let $more_pk_ui_tests= 0;
# The server must support partitioning. But NDB is partitioned from the start.
# Thats why the next line is set to comment.
# --source include/have_partition.inc
# The server must support partitioning.
--source include/have_partition.inc
#------------------------------------------------------------------------------#
# Engine specific settings and requirements
##### Storage engine to be tested
--source include/have_ndb.inc
let $engine= 'ndbcluster';
connection default;
# range, list and hash partitioning in ndb requires new_mode
--disable_query_log
set new=on;
--enable_query_log
--source include/have_innodb.inc
let $engine= 'InnoDB';
##### Execute the test of "table" files
# NDB has no files per PK, UI, ...
# InnoDB has no files per PK, UI, ...
let $do_file_tests= 0;
##### Execute PRIMARY KEY tests #####
# AFAIK NDB is always partitioned using the explicit defined PRIMARY KEY
# or uses an internal one.
# AFAIK InnoDB clusters the table around PRIMARY KEYs.
let $do_pk_tests= 1;
##### Assign a big number smaller than the maximum value for partitions #####
# and smaller than the maximum value of SIGNED INTEGER
# The NDB handler only supports 32 bit integers in VALUES
# 2147483647 seems to be too big.
let $MAX_VALUE= (2147483646);
# Generate the prerequisites ($variables, @variables, tables) needed
......@@ -79,7 +70,7 @@ let $MAX_VALUE= (2147483646);
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_alter2.inc
--source suite/parts/inc/partition_alter2_2.inc
#------------------------------------------------------------------------------#
# Execute storage engine specific tests
......
mysql-test/suite/parts/t/partition_alter2_2_myisam.test 0 → 100644
View file @ 1e26e74c
################################################################################
# t/partition_alter2_2_myisam.test #
# #
# Purpose: #
# Tests around Alter column used in partitioning function #
# MyISAM branch #
# #
#------------------------------------------------------------------------------#
# Original Author: mleich #
# Original Date: 2006-03-05 #
# Change Author: #
# Change Date: #
# Change: #
################################################################################
#
# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
# TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
# THE SOURCED FILES ONLY.
#
# Please read the README at the end of inc/partition.pre before changing
# any of the variables.
#
#------------------------------------------------------------------------------#
# General not engine specific settings and requirements
##### Options, for debugging support #####
let $debug= 0;
let $with_partitioning= 1;
##### Option, for displaying files #####
let $ls= 1;
##### Number of rows for the INSERT/UPDATE/DELETE/SELECT experiments #####
# on partioned tables
SET @max_row = 20;
##### Execute more tests #####
let $more_trigger_tests= 0;
let $more_pk_ui_tests= 0;
# The server must support partitioning.
--source include/have_partition.inc
#------------------------------------------------------------------------------#
# Engine specific settings and requirements
##### Storage engine to be tested
let $engine= 'MyISAM';
##### Execute the test of "table" files
# MyISAM has files per PK, UI, ...
let $do_file_tests= 1;
##### Execute PRIMARY KEY tests #####
# AFAIK MyISAM treats PRIMARY KEYs like UNIQUE INDEXes
let $do_pk_tests= 0;
##### Assign a big number smaller than the maximum value for partitions #####
# and smaller than the maximum value of SIGNED INTEGER
let $MAX_VALUE= (2147483646);
# Generate the prerequisites ($variables, @variables, tables) needed
--source suite/parts/inc/partition.pre
##### Workarounds for known open engine specific bugs
# none
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_alter2_2.inc
#------------------------------------------------------------------------------#
# Execute storage engine specific tests
#------------------------------------------------------------------------------#
# Cleanup
--source suite/parts/inc/partition_cleanup.inc
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7