mysql-5.1-bugteam (local) --> mysql-5.1-bugteam

mysql-test/extra/binlog_tests/binlog_failure_mixing_engines.test

+################################################################################
+# Let 
+#   - B be begin, C commit and R rollback.
+#   - T a statement that accesses and changes only transactional tables, i.e.
+#   T-tables
+#   - N a statement that accesses and changes only non-transactional tables,
+#   i.e, N-tables.
+#   - M be a mixed statement, i.e. a statement that updates both T- and 
+#   N-tables.
+#   - M* be a mixed statement that fails while updating either a T
+#   or N-table.
+#   - N* be a statement that fails while updating a N-table.
+#
+# In this test case, when changes are logged as rows either in the RBR or MIXED
+# modes, we check if a M* statement that happens early in a transaction is
+# written to the binary log outside the boundaries of the transaction and
+# wrapped up in a BEGIN/ROLLBACK. This is done to keep the slave consistent with
+# the master as the rollback will keep the changes on N-tables and undo them on
+# T-tables. In particular, we expect the following behavior:
+#
+#  1. B M* T C would generate in the binlog B M* R B T C.
+#  2. B M M* C would generate in the binlog B M M* C.
+#  3. B M* M* T C would generate in the binlog B M* R B M* R B T C.
+#
+# SBR is not considered in this test because a failing statement is written to
+# the binary along with the error code such that a slave executes and rolls it
+# back, thus undoing the effects on T-tables.
+#
+# Note that, in the first case, we are not preserving history from the master as
+# we are introducing a rollback that never happened. However, this seems to be
+# more acceptable than making the slave diverge. In the second case, the slave
+# will diverge as the changes on T-tables that originated from the M statement
+# are rolled back on the master but not on the slave. Unfortunately, we cannot 
+# simply roll the transaction back as this would undo any uncommitted changes
+# on T-tables.
+#
+# We check two more cases. First, INSERT...SELECT* which produces the following
+# results:
+#
+# 1. B T INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates in
+# the binlog the following entries: "Nothing".
+# 2. B INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates in
+# the binlog the following entries: B INSERT M...SELECT* R.
+#
+# Finally, we also check if any N statement that happens early in a transaction
+# (i.e. before any T or M statement) is written to the binary log outside the
+# boundaries of the transaction. In particular, we expect the following
+# behavior:
+#
+# 1. B N N T C would generate in the binlog B N C B N C B T C.
+# 2. B N N T R would generate in the binlog B N C B N C B T R.
+# 3. B N* N* T C would generate in the binlog B N R B N R B T C.
+# 4. B N* N* T R would generate in the binlog B N R B N R B T R.
+# 5. B N N T N T C would generate in the binlog B N C B N C B T N T C.
+# 6. B N N T N T R would generate in the binlog the B N C B N C B T N T R.
+# 
+# Such issues do not happen in SBR. In RBR and MBR, a full-fledged fix will be
+# pushed after the WL#2687.
+#
+# Please, remove this test case after pushing WL#2687.
+################################################################################
+
+
+--echo ###################################################################################
+--echo #                                   CONFIGURATION
+--echo ###################################################################################
+CREATE TABLE nt_1 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
+CREATE TABLE nt_2 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
+CREATE TABLE tt_1 (a text, b int PRIMARY KEY) ENGINE = Innodb;
+CREATE TABLE tt_2 (a text, b int PRIMARY KEY) ENGINE = Innodb;
+
+DELIMITER |;
+
+CREATE TRIGGER tr_i_tt_1_to_nt_1 BEFORE INSERT ON tt_1 FOR EACH ROW
+BEGIN
+  INSERT INTO nt_1 VALUES (NEW.a, NEW.b);
+END|
+
+CREATE TRIGGER tr_i_nt_2_to_tt_2 BEFORE INSERT ON nt_2 FOR EACH ROW
+BEGIN
+  INSERT INTO tt_2 VALUES (NEW.a, NEW.b);
+END|
+
+DELIMITER ;|
+
+--echo ###################################################################################
+--echo #                             CHECK HISTORY IN BINLOG
+--echo ###################################################################################
+--echo
+--echo
+--echo
+--echo *** "B M* T C" with error in M* generates in the binlog the "B M* R B T C" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+INSERT INTO nt_1 VALUES ("new text 1", 1);
+BEGIN;
+--error ER_DUP_ENTRY
+INSERT INTO tt_1 VALUES (USER(), 2), (USER(), 1);
+INSERT INTO tt_2 VALUES ("new text 3", 3);
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+INSERT INTO tt_2 VALUES ("new text 4", 4);
+BEGIN;
+--error ER_DUP_ENTRY
+INSERT INTO nt_2 VALUES (USER(), 5), (USER(), 4);
+INSERT INTO tt_2 VALUES ("new text 6", 6);
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B M M* T C" with error in M* generates in the binlog the "B M M* T C" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+INSERT INTO nt_1 VALUES ("new text 10", 10);
+BEGIN;
+INSERT INTO tt_1 VALUES ("new text 7", 7), ("new text 8", 8);
+--error ER_DUP_ENTRY
+INSERT INTO tt_1 VALUES (USER(), 9), (USER(), 10);
+INSERT INTO tt_2 VALUES ("new text 11", 11);
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+INSERT INTO tt_2 VALUES ("new text 15", 15);
+BEGIN;
+INSERT INTO nt_2 VALUES ("new text 12", 12), ("new text 13", 13);
+--error ER_DUP_ENTRY
+INSERT INTO nt_2 VALUES (USER(), 14), (USER(), 15);
+INSERT INTO tt_2 VALUES ("new text 16", 16);
+COMMIT;
+--source include/show_binlog_events.inc
+
+
+--echo
+--echo
+--echo
+--echo *** "B M* M* T C" with error in M* generates in the binlog the "B M* R B M* R B T C" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+INSERT INTO nt_1 VALUES ("new text 18", 18);
+INSERT INTO nt_1 VALUES ("new text 20", 20);
+BEGIN;
+--error ER_DUP_ENTRY
+INSERT INTO tt_1 VALUES (USER(), 17), (USER(), 18);
+--error ER_DUP_ENTRY
+INSERT INTO tt_1 VALUES (USER(), 19), (USER(), 20);
+INSERT INTO tt_2 VALUES ("new text 21", 21);
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+INSERT INTO tt_2 VALUES ("new text 23", 23);
+INSERT INTO tt_2 VALUES ("new text 25", 25);
+BEGIN;
+--error ER_DUP_ENTRY
+INSERT INTO nt_2 VALUES (USER(), 22), (USER(), 23);
+--error ER_DUP_ENTRY
+INSERT INTO nt_2 VALUES (USER(), 24), (USER(), 25);
+INSERT INTO tt_2 VALUES ("new text 26", 26);
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B T INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates
+--echo *** in the binlog the following entries: "Nothing".
+--echo *** There is a bug in that will be fixed after WL#2687. Please, check BUG#47175 for further details.
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+TRUNCATE TABLE nt_2;
+TRUNCATE TABLE tt_2;
+INSERT INTO tt_2 VALUES ("new text 7", 7);
+BEGIN;
+INSERT INTO tt_2 VALUES ("new text 27", 27);
+--error ER_DUP_ENTRY
+INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
+INSERT INTO tt_2 VALUES ("new text 28", 28);
+ROLLBACK;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B INSERT M..SELECT* C" with an error in INSERT M...SELECT* generates
+--echo *** in the binlog the following entries: "B INSERT M..SELECT* R".
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+TRUNCATE TABLE nt_2;
+TRUNCATE TABLE tt_2;
+INSERT INTO tt_2 VALUES ("new text 7", 7);
+BEGIN;
+--error ER_DUP_ENTRY
+INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B N N T C" generates in the binlog the "B N C B N C B T C" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+TRUNCATE TABLE nt_1;
+TRUNCATE TABLE tt_2;
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 1);
+INSERT INTO nt_1 VALUES (USER(), 2);
+INSERT INTO tt_2 VALUES (USER(), 3);
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B N N T R" generates in the binlog the "B N C B N C B T R" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 4);
+INSERT INTO nt_1 VALUES (USER(), 5);
+INSERT INTO tt_2 VALUES (USER(), 6);
+ROLLBACK;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B N* N* T C" with error in N* generates in the binlog the "B N R B N R B T C" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+BEGIN;
+--error ER_DUP_ENTRY
+INSERT INTO nt_1 VALUES (USER(), 7), (USER(), 1);
+--error ER_DUP_ENTRY
+INSERT INTO nt_1 VALUES (USER(), 8), (USER(), 1);
+INSERT INTO tt_2 VALUES (USER(), 9);
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B N* N* T R" with error in N* generates in the binlog the "B N R B N R B T R" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+BEGIN;
+--error ER_DUP_ENTRY
+INSERT INTO nt_1 VALUES (USER(), 10), (USER(), 1);
+--error ER_DUP_ENTRY
+INSERT INTO nt_1 VALUES (USER(), 11), (USER(), 1);
+INSERT INTO tt_2 VALUES (USER(), 12);
+ROLLBACK;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B N N T N T C" generates in the binlog the "B N C B N C B T N T C" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 13);
+INSERT INTO nt_1 VALUES (USER(), 14);
+INSERT INTO tt_2 VALUES (USER(), 15);
+INSERT INTO nt_1 VALUES (USER(), 16);
+INSERT INTO tt_2 VALUES (USER(), 17);
+COMMIT;
+--source include/show_binlog_events.inc
+
+--echo
+--echo
+--echo
+--echo *** "B N N T N T R" generates in the binlog the "B N C B N C B T N T R" entries
+--echo
+let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 18);
+INSERT INTO nt_1 VALUES (USER(), 19);
+INSERT INTO tt_2 VALUES (USER(), 20);
+INSERT INTO nt_1 VALUES (USER(), 21);
+INSERT INTO tt_2 VALUES (USER(), 22);
+ROLLBACK;
+--source include/show_binlog_events.inc
+
+--echo ###################################################################################
+--echo #                                        CLEAN
+--echo ###################################################################################
+
+DROP TABLE tt_1;
+DROP TABLE tt_2;
+DROP TABLE nt_1;
+DROP TABLE nt_2;

mysql-test/suite/binlog/r/binlog_mixed_failure_mixing_engines.result

+###################################################################################
+#                                   CONFIGURATION
+###################################################################################
+CREATE TABLE nt_1 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
+CREATE TABLE nt_2 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
+CREATE TABLE tt_1 (a text, b int PRIMARY KEY) ENGINE = Innodb;
+CREATE TABLE tt_2 (a text, b int PRIMARY KEY) ENGINE = Innodb;
+CREATE TRIGGER tr_i_tt_1_to_nt_1 BEFORE INSERT ON tt_1 FOR EACH ROW
+BEGIN
+INSERT INTO nt_1 VALUES (NEW.a, NEW.b);
+END|
+CREATE TRIGGER tr_i_nt_2_to_tt_2 BEFORE INSERT ON nt_2 FOR EACH ROW
+BEGIN
+INSERT INTO tt_2 VALUES (NEW.a, NEW.b);
+END|
+###################################################################################
+#                             CHECK HISTORY IN BINLOG
+###################################################################################
+
+
+
+*** "B M* T C" with error in M* generates in the binlog the "B M* R B T C" entries
+
+INSERT INTO nt_1 VALUES ("new text 1", 1);
+BEGIN;
+INSERT INTO tt_1 VALUES (USER(), 2), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 3", 3);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1 VALUES ("new text 1", 1)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 3", 3)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+INSERT INTO tt_2 VALUES ("new text 4", 4);
+BEGIN;
+INSERT INTO nt_2 VALUES (USER(), 5), (USER(), 4);
+ERROR 23000: Duplicate entry '4' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 6", 6);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 4", 4)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 6", 6)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B M M* T C" with error in M* generates in the binlog the "B M M* T C" entries
+
+INSERT INTO nt_1 VALUES ("new text 10", 10);
+BEGIN;
+INSERT INTO tt_1 VALUES ("new text 7", 7), ("new text 8", 8);
+INSERT INTO tt_1 VALUES (USER(), 9), (USER(), 10);
+ERROR 23000: Duplicate entry '10' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 11", 11);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1 VALUES ("new text 10", 10)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_1 VALUES ("new text 7", 7), ("new text 8", 8)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 11", 11)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+INSERT INTO tt_2 VALUES ("new text 15", 15);
+BEGIN;
+INSERT INTO nt_2 VALUES ("new text 12", 12), ("new text 13", 13);
+INSERT INTO nt_2 VALUES (USER(), 14), (USER(), 15);
+ERROR 23000: Duplicate entry '15' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 16", 16);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 15", 15)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_2 VALUES ("new text 12", 12), ("new text 13", 13)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 16", 16)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B M* M* T C" with error in M* generates in the binlog the "B M* R B M* R B T C" entries
+
+INSERT INTO nt_1 VALUES ("new text 18", 18);
+INSERT INTO nt_1 VALUES ("new text 20", 20);
+BEGIN;
+INSERT INTO tt_1 VALUES (USER(), 17), (USER(), 18);
+ERROR 23000: Duplicate entry '18' for key 'PRIMARY'
+INSERT INTO tt_1 VALUES (USER(), 19), (USER(), 20);
+ERROR 23000: Duplicate entry '20' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 21", 21);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1 VALUES ("new text 18", 18)
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1 VALUES ("new text 20", 20)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 21", 21)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+INSERT INTO tt_2 VALUES ("new text 23", 23);
+INSERT INTO tt_2 VALUES ("new text 25", 25);
+BEGIN;
+INSERT INTO nt_2 VALUES (USER(), 22), (USER(), 23);
+ERROR 23000: Duplicate entry '23' for key 'PRIMARY'
+INSERT INTO nt_2 VALUES (USER(), 24), (USER(), 25);
+ERROR 23000: Duplicate entry '25' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 26", 26);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 23", 23)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 25", 25)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 26", 26)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B T INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates
+*** in the binlog the following entries: "Nothing".
+*** There is a bug in that will be fixed after WL#2687. Please, check BUG#47175 for further details.
+
+TRUNCATE TABLE nt_2;
+TRUNCATE TABLE tt_2;
+INSERT INTO tt_2 VALUES ("new text 7", 7);
+BEGIN;
+INSERT INTO tt_2 VALUES ("new text 27", 27);
+INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
+ERROR 23000: Duplicate entry '7' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 28", 28);
+ROLLBACK;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE nt_2
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE tt_2
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 7", 7)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B INSERT M..SELECT* C" with an error in INSERT M...SELECT* generates
+*** in the binlog the following entries: "B INSERT M..SELECT* R".
+
+TRUNCATE TABLE nt_2;
+TRUNCATE TABLE tt_2;
+INSERT INTO tt_2 VALUES ("new text 7", 7);
+BEGIN;
+INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
+ERROR 23000: Duplicate entry '7' for key 'PRIMARY'
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE nt_2
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE tt_2
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_2 VALUES ("new text 7", 7)
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+
+
+
+*** "B N N T C" generates in the binlog the "B N C B N C B T C" entries
+
+TRUNCATE TABLE nt_1;
+TRUNCATE TABLE tt_2;
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 1);
+INSERT INTO nt_1 VALUES (USER(), 2);
+INSERT INTO tt_2 VALUES (USER(), 3);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE nt_1
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE tt_2
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B N N T R" generates in the binlog the "B N C B N C B T R" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 4);
+INSERT INTO nt_1 VALUES (USER(), 5);
+INSERT INTO tt_2 VALUES (USER(), 6);
+ROLLBACK;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+
+
+
+*** "B N* N* T C" with error in N* generates in the binlog the "B N R B N R B T C" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 7), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO nt_1 VALUES (USER(), 8), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES (USER(), 9);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B N* N* T R" with error in N* generates in the binlog the "B N R B N R B T R" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 10), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO nt_1 VALUES (USER(), 11), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES (USER(), 12);
+ROLLBACK;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+
+
+
+*** "B N N T N T C" generates in the binlog the "B N C B N C B T N T C" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 13);
+INSERT INTO nt_1 VALUES (USER(), 14);
+INSERT INTO tt_2 VALUES (USER(), 15);
+INSERT INTO nt_1 VALUES (USER(), 16);
+INSERT INTO tt_2 VALUES (USER(), 17);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B N N T N T R" generates in the binlog the "B N C B N C B T N T R" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 18);
+INSERT INTO nt_1 VALUES (USER(), 19);
+INSERT INTO tt_2 VALUES (USER(), 20);
+INSERT INTO nt_1 VALUES (USER(), 21);
+INSERT INTO tt_2 VALUES (USER(), 22);
+ROLLBACK;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+###################################################################################
+#                                        CLEAN
+###################################################################################
+DROP TABLE tt_1;
+DROP TABLE tt_2;
+DROP TABLE nt_1;
+DROP TABLE nt_2;

mysql-test/suite/binlog/r/binlog_row_failure_mixing_engines.result

+###################################################################################
+#                                   CONFIGURATION
+###################################################################################
+CREATE TABLE nt_1 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
+CREATE TABLE nt_2 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
+CREATE TABLE tt_1 (a text, b int PRIMARY KEY) ENGINE = Innodb;
+CREATE TABLE tt_2 (a text, b int PRIMARY KEY) ENGINE = Innodb;
+CREATE TRIGGER tr_i_tt_1_to_nt_1 BEFORE INSERT ON tt_1 FOR EACH ROW
+BEGIN
+INSERT INTO nt_1 VALUES (NEW.a, NEW.b);
+END|
+CREATE TRIGGER tr_i_nt_2_to_tt_2 BEFORE INSERT ON nt_2 FOR EACH ROW
+BEGIN
+INSERT INTO tt_2 VALUES (NEW.a, NEW.b);
+END|
+###################################################################################
+#                             CHECK HISTORY IN BINLOG
+###################################################################################
+
+
+
+*** "B M* T C" with error in M* generates in the binlog the "B M* R B T C" entries
+
+INSERT INTO nt_1 VALUES ("new text 1", 1);
+BEGIN;
+INSERT INTO tt_1 VALUES (USER(), 2), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 3", 3);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+INSERT INTO tt_2 VALUES ("new text 4", 4);
+BEGIN;
+INSERT INTO nt_2 VALUES (USER(), 5), (USER(), 4);
+ERROR 23000: Duplicate entry '4' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 6", 6);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B M M* T C" with error in M* generates in the binlog the "B M M* T C" entries
+
+INSERT INTO nt_1 VALUES ("new text 10", 10);
+BEGIN;
+INSERT INTO tt_1 VALUES ("new text 7", 7), ("new text 8", 8);
+INSERT INTO tt_1 VALUES (USER(), 9), (USER(), 10);
+ERROR 23000: Duplicate entry '10' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 11", 11);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+INSERT INTO tt_2 VALUES ("new text 15", 15);
+BEGIN;
+INSERT INTO nt_2 VALUES ("new text 12", 12), ("new text 13", 13);
+INSERT INTO nt_2 VALUES (USER(), 14), (USER(), 15);
+ERROR 23000: Duplicate entry '15' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 16", 16);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B M* M* T C" with error in M* generates in the binlog the "B M* R B M* R B T C" entries
+
+INSERT INTO nt_1 VALUES ("new text 18", 18);
+INSERT INTO nt_1 VALUES ("new text 20", 20);
+BEGIN;
+INSERT INTO tt_1 VALUES (USER(), 17), (USER(), 18);
+ERROR 23000: Duplicate entry '18' for key 'PRIMARY'
+INSERT INTO tt_1 VALUES (USER(), 19), (USER(), 20);
+ERROR 23000: Duplicate entry '20' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 21", 21);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+INSERT INTO tt_2 VALUES ("new text 23", 23);
+INSERT INTO tt_2 VALUES ("new text 25", 25);
+BEGIN;
+INSERT INTO nt_2 VALUES (USER(), 22), (USER(), 23);
+ERROR 23000: Duplicate entry '23' for key 'PRIMARY'
+INSERT INTO nt_2 VALUES (USER(), 24), (USER(), 25);
+ERROR 23000: Duplicate entry '25' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 26", 26);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B T INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates
+*** in the binlog the following entries: "Nothing".
+*** There is a bug in that will be fixed after WL#2687. Please, check BUG#47175 for further details.
+
+TRUNCATE TABLE nt_2;
+TRUNCATE TABLE tt_2;
+INSERT INTO tt_2 VALUES ("new text 7", 7);
+BEGIN;
+INSERT INTO tt_2 VALUES ("new text 27", 27);
+INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
+ERROR 23000: Duplicate entry '7' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES ("new text 28", 28);
+ROLLBACK;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE nt_2
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE tt_2
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B INSERT M..SELECT* C" with an error in INSERT M...SELECT* generates
+*** in the binlog the following entries: "B INSERT M..SELECT* R".
+
+TRUNCATE TABLE nt_2;
+TRUNCATE TABLE tt_2;
+INSERT INTO tt_2 VALUES ("new text 7", 7);
+BEGIN;
+INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
+ERROR 23000: Duplicate entry '7' for key 'PRIMARY'
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE nt_2
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE tt_2
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_2)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+
+
+
+*** "B N N T C" generates in the binlog the "B N C B N C B T C" entries
+
+TRUNCATE TABLE nt_1;
+TRUNCATE TABLE tt_2;
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 1);
+INSERT INTO nt_1 VALUES (USER(), 2);
+INSERT INTO tt_2 VALUES (USER(), 3);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE nt_1
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; TRUNCATE TABLE tt_2
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B N N T R" generates in the binlog the "B N C B N C B T R" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 4);
+INSERT INTO nt_1 VALUES (USER(), 5);
+INSERT INTO tt_2 VALUES (USER(), 6);
+ROLLBACK;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+
+
+
+*** "B N* N* T C" with error in N* generates in the binlog the "B N R B N R B T C" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 7), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO nt_1 VALUES (USER(), 8), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES (USER(), 9);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B N* N* T R" with error in N* generates in the binlog the "B N R B N R B T R" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 10), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO nt_1 VALUES (USER(), 11), (USER(), 1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+INSERT INTO tt_2 VALUES (USER(), 12);
+ROLLBACK;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+
+
+
+*** "B N N T N T C" generates in the binlog the "B N C B N C B T N T C" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 13);
+INSERT INTO nt_1 VALUES (USER(), 14);
+INSERT INTO tt_2 VALUES (USER(), 15);
+INSERT INTO nt_1 VALUES (USER(), 16);
+INSERT INTO tt_2 VALUES (USER(), 17);
+COMMIT;
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+
+
+
+*** "B N N T N T R" generates in the binlog the "B N C B N C B T N T R" entries
+
+BEGIN;
+INSERT INTO nt_1 VALUES (USER(), 18);
+INSERT INTO nt_1 VALUES (USER(), 19);
+INSERT INTO tt_2 VALUES (USER(), 20);
+INSERT INTO nt_1 VALUES (USER(), 21);
+INSERT INTO tt_2 VALUES (USER(), 22);
+ROLLBACK;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	ROLLBACK
+###################################################################################
+#                                        CLEAN
+###################################################################################
+DROP TABLE tt_1;
+DROP TABLE tt_2;
+DROP TABLE nt_1;
+DROP TABLE nt_2;

mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result

@@ -133,6 +133,10 @@ master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
 insert into t1 values(11);
 commit;
 show binlog events from <binlog_start>;
@@ -144,6 +148,8 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t2)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
@@ -272,6 +278,10 @@ master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t2)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	use `test`; drop table t1,t2
 master-bin.000001	#	Query	#	#	use `test`; create table t0 (n int)
 master-bin.000001	#	Query	#	#	BEGIN
@@ -372,7 +382,7 @@ master-bin.000001	#	Query	#	#	use `test`; DROP TABLE if exists t2
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	use `test`; DROP TABLE IF EXISTS t2
 master-bin.000001	#	Query	#	#	use `test`; CREATE TABLE t2 (a int, b int, primary key (a)) engine=innodb
 master-bin.000001	#	Query	#	#	BEGIN
@@ -390,9 +400,11 @@ master-bin.000001	#	Query	#	#	use `test`; DROP TABLE t2
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
@@ -400,7 +412,7 @@ master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	use `test`; TRUNCATE table t2
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)

mysql-test/suite/binlog/t/binlog_mixed_failure_mixing_engines.test

+--source include/have_binlog_format_mixed.inc
+--source include/have_innodb.inc
+
+--source extra/binlog_tests/binlog_failure_mixing_engines.test

mysql-test/suite/binlog/t/binlog_row_failure_mixing_engines.test

+--source include/have_binlog_format_row.inc
+--source include/have_innodb.inc
+
+--source extra/binlog_tests/binlog_failure_mixing_engines.test

mysql-test/suite/rpl/r/rpl_row_create_table.result

@@ -176,7 +176,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 #	106	Query	#	174	BEGIN
 #	174	Table_map	#	216	table_id: # (test.t7)
 #	216	Write_rows	#	272	table_id: # flags: STMT_END_F
-#	272	Query	#	343	ROLLBACK
+#	272	Query	#	341	COMMIT
 SELECT * FROM t7 ORDER BY a,b;
 a	b
 1	2
@@ -327,7 +327,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 #	1329	Query	#	1397	BEGIN
 #	1397	Table_map	#	1438	table_id: # (test.t1)
 #	1438	Write_rows	#	1482	table_id: # flags: STMT_END_F
-#	1482	Query	#	1553	ROLLBACK
+#	1482	Query	#	1551	COMMIT
 SHOW TABLES;
 Tables_in_test
 t1

sql/log.cc

@@ -153,7 +153,7 @@ class Mutex_sentry
 class binlog_trx_data {
 public:
   binlog_trx_data()
-    : at_least_one_stmt(0), incident(FALSE), m_pending(0),
+    : at_least_one_stmt_committed(0), incident(FALSE), m_pending(0),
     before_stmt_pos(MY_OFF_T_UNDEF)
   {
     trans_log.end_of_file= max_binlog_cache_size;
@@ -182,7 +182,10 @@ class binlog_trx_data {
   {
     DBUG_PRINT("info", ("truncating to position %lu", (ulong) pos));
     DBUG_PRINT("info", ("before_stmt_pos=%lu", (ulong) pos));
-    delete pending();
+    if (pending())
+    {
+      delete pending();
+    }
     set_pending(0);
     reinit_io_cache(&trans_log, WRITE_CACHE, pos, 0, 0);
     trans_log.end_of_file= max_binlog_cache_size;
@@ -192,12 +195,12 @@ class binlog_trx_data {
     /*
       The only valid positions that can be truncated to are at the
       beginning of a statement. We are relying on this fact to be able
-      to set the at_least_one_stmt flag correctly. In other word, if
+      to set the at_least_one_stmt_committed flag correctly. In other word, if
       we are truncating to the beginning of the transaction cache,
       there will be no statements in the cache, otherwhise, we will
       have at least one statement in the transaction cache.
      */
-    at_least_one_stmt= (pos > 0);
+    at_least_one_stmt_committed= (pos > 0);
   }
 
   /*
@@ -239,7 +242,7 @@ class binlog_trx_data {
     Boolean that is true if there is at least one statement in the
     transaction cache.
   */
-  bool at_least_one_stmt;
+  bool at_least_one_stmt_committed;
   bool incident;
 
 private:
@@ -1272,7 +1275,7 @@ static bool stmt_has_updated_trans_table(THD *thd)
 {
   Ha_trx_info *ha_info;
 
-  for (ha_info= thd->transaction.stmt.ha_list; ha_info; ha_info= ha_info->next())
+  for (ha_info= thd->transaction.stmt.ha_list; ha_info && ha_info->is_started(); ha_info= ha_info->next())
   {
     if (ha_info->is_trx_read_write() && ha_info->ht() != binlog_hton)
       return (TRUE);
@@ -1535,13 +1538,17 @@ static int binlog_commit(handlerton *hton, THD *thd, bool all)
               YESNO(in_transaction),
               YESNO(thd->transaction.all.modified_non_trans_table),
               YESNO(thd->transaction.stmt.modified_non_trans_table)));
-  if (!in_transaction || all)
+  if (!in_transaction || all ||
+      (!all && !trx_data->at_least_one_stmt_committed &&
+      !stmt_has_updated_trans_table(thd) &&
+      thd->transaction.stmt.modified_non_trans_table))
   {
     Query_log_event qev(thd, STRING_WITH_LEN("COMMIT"), TRUE, TRUE, 0);
     error= binlog_end_trans(thd, trx_data, &qev, all);
-    goto end;
   }
 
+  trx_data->at_least_one_stmt_committed = my_b_tell(&trx_data->trans_log) > 0;
+
 end:
   if (!all)
     trx_data->before_stmt_pos = MY_OFF_T_UNDEF; // part of the stmt commit
@@ -1608,15 +1615,18 @@ static int binlog_rollback(handlerton *hton, THD *thd, bool all)
   {
    /*
       We flush the cache with a rollback, wrapped in a beging/rollback if:
-        . aborting a transcation that modified a non-transactional table or;
+        . aborting a transaction that modified a non-transactional table;
         . aborting a statement that modified both transactional and
-          non-transctional tables but which is not in the boundaries of any
-          transaction;
+          non-transactional tables but which is not in the boundaries of any
+          transaction or there was no early change;
         . the OPTION_KEEP_LOG is activate.
     */
     if ((all && thd->transaction.all.modified_non_trans_table) ||
         (!all && thd->transaction.stmt.modified_non_trans_table &&
          !(thd->options & (OPTION_BEGIN | OPTION_NOT_AUTOCOMMIT))) ||
+        (!all && thd->transaction.stmt.modified_non_trans_table &&
+         !trx_data->at_least_one_stmt_committed &&
+         thd->current_stmt_binlog_row_based) ||
         ((thd->options & OPTION_KEEP_LOG)))
     {
       Query_log_event qev(thd, STRING_WITH_LEN("ROLLBACK"), TRUE, TRUE, 0);