Skip to content

M
MariaDB
Commit 2a243fa2 authored by Alfranio Correia's avatar Alfranio Correia
Browse files
Options

mysql-5.1-bugteam (local) --> mysql-5.1-bugteam

parents 618d7980 b31e0c9a
Show whitespace changes
Inline Side-by-side
Showing with 1192 additions and 16 deletions
mysql-test/extra/binlog_tests/binlog_failure_mixing_engines.test 0 → 100644
View file @ 2a243fa2
################################################################################
# Let
# - B be begin, C commit and R rollback.
# - T a statement that accesses and changes only transactional tables, i.e.
# T-tables
# - N a statement that accesses and changes only non-transactional tables,
# i.e, N-tables.
# - M be a mixed statement, i.e. a statement that updates both T- and
# N-tables.
# - M* be a mixed statement that fails while updating either a T
# or N-table.
# - N* be a statement that fails while updating a N-table.
#
# In this test case, when changes are logged as rows either in the RBR or MIXED
# modes, we check if a M* statement that happens early in a transaction is
# written to the binary log outside the boundaries of the transaction and
# wrapped up in a BEGIN/ROLLBACK. This is done to keep the slave consistent with
# the master as the rollback will keep the changes on N-tables and undo them on
# T-tables. In particular, we expect the following behavior:
#
# 1. B M* T C would generate in the binlog B M* R B T C.
# 2. B M M* C would generate in the binlog B M M* C.
# 3. B M* M* T C would generate in the binlog B M* R B M* R B T C.
#
# SBR is not considered in this test because a failing statement is written to
# the binary along with the error code such that a slave executes and rolls it
# back, thus undoing the effects on T-tables.
#
# Note that, in the first case, we are not preserving history from the master as
# we are introducing a rollback that never happened. However, this seems to be
# more acceptable than making the slave diverge. In the second case, the slave
# will diverge as the changes on T-tables that originated from the M statement
# are rolled back on the master but not on the slave. Unfortunately, we cannot
# simply roll the transaction back as this would undo any uncommitted changes
# on T-tables.
#
# We check two more cases. First, INSERT...SELECT* which produces the following
# results:
#
# 1. B T INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates in
# the binlog the following entries: "Nothing".
# 2. B INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates in
# the binlog the following entries: B INSERT M...SELECT* R.
#
# Finally, we also check if any N statement that happens early in a transaction
# (i.e. before any T or M statement) is written to the binary log outside the
# boundaries of the transaction. In particular, we expect the following
# behavior:
#
# 1. B N N T C would generate in the binlog B N C B N C B T C.
# 2. B N N T R would generate in the binlog B N C B N C B T R.
# 3. B N* N* T C would generate in the binlog B N R B N R B T C.
# 4. B N* N* T R would generate in the binlog B N R B N R B T R.
# 5. B N N T N T C would generate in the binlog B N C B N C B T N T C.
# 6. B N N T N T R would generate in the binlog the B N C B N C B T N T R.
#
# Such issues do not happen in SBR. In RBR and MBR, a full-fledged fix will be
# pushed after the WL#2687.
#
# Please, remove this test case after pushing WL#2687.
################################################################################
--echo ###################################################################################
--echo # CONFIGURATION
--echo ###################################################################################
CREATE TABLE nt_1 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
CREATE TABLE nt_2 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
CREATE TABLE tt_1 (a text, b int PRIMARY KEY) ENGINE = Innodb;
CREATE TABLE tt_2 (a text, b int PRIMARY KEY) ENGINE = Innodb;
DELIMITER |;
CREATE TRIGGER tr_i_tt_1_to_nt_1 BEFORE INSERT ON tt_1 FOR EACH ROW
BEGIN
INSERT INTO nt_1 VALUES (NEW.a, NEW.b);
END|
CREATE TRIGGER tr_i_nt_2_to_tt_2 BEFORE INSERT ON nt_2 FOR EACH ROW
BEGIN
INSERT INTO tt_2 VALUES (NEW.a, NEW.b);
END|
DELIMITER ;|
--echo ###################################################################################
--echo # CHECK HISTORY IN BINLOG
--echo ###################################################################################
--echo
--echo
--echo
--echo *** "B M* T C" with error in M* generates in the binlog the "B M* R B T C" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
INSERT INTO nt_1 VALUES ("new text 1", 1);
BEGIN;
--error ER_DUP_ENTRY
INSERT INTO tt_1 VALUES (USER(), 2), (USER(), 1);
INSERT INTO tt_2 VALUES ("new text 3", 3);
COMMIT;
--source include/show_binlog_events.inc
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
INSERT INTO tt_2 VALUES ("new text 4", 4);
BEGIN;
--error ER_DUP_ENTRY
INSERT INTO nt_2 VALUES (USER(), 5), (USER(), 4);
INSERT INTO tt_2 VALUES ("new text 6", 6);
COMMIT;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B M M* T C" with error in M* generates in the binlog the "B M M* T C" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
INSERT INTO nt_1 VALUES ("new text 10", 10);
BEGIN;
INSERT INTO tt_1 VALUES ("new text 7", 7), ("new text 8", 8);
--error ER_DUP_ENTRY
INSERT INTO tt_1 VALUES (USER(), 9), (USER(), 10);
INSERT INTO tt_2 VALUES ("new text 11", 11);
COMMIT;
--source include/show_binlog_events.inc
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
INSERT INTO tt_2 VALUES ("new text 15", 15);
BEGIN;
INSERT INTO nt_2 VALUES ("new text 12", 12), ("new text 13", 13);
--error ER_DUP_ENTRY
INSERT INTO nt_2 VALUES (USER(), 14), (USER(), 15);
INSERT INTO tt_2 VALUES ("new text 16", 16);
COMMIT;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B M* M* T C" with error in M* generates in the binlog the "B M* R B M* R B T C" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
INSERT INTO nt_1 VALUES ("new text 18", 18);
INSERT INTO nt_1 VALUES ("new text 20", 20);
BEGIN;
--error ER_DUP_ENTRY
INSERT INTO tt_1 VALUES (USER(), 17), (USER(), 18);
--error ER_DUP_ENTRY
INSERT INTO tt_1 VALUES (USER(), 19), (USER(), 20);
INSERT INTO tt_2 VALUES ("new text 21", 21);
COMMIT;
--source include/show_binlog_events.inc
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
INSERT INTO tt_2 VALUES ("new text 23", 23);
INSERT INTO tt_2 VALUES ("new text 25", 25);
BEGIN;
--error ER_DUP_ENTRY
INSERT INTO nt_2 VALUES (USER(), 22), (USER(), 23);
--error ER_DUP_ENTRY
INSERT INTO nt_2 VALUES (USER(), 24), (USER(), 25);
INSERT INTO tt_2 VALUES ("new text 26", 26);
COMMIT;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B T INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates
--echo *** in the binlog the following entries: "Nothing".
--echo *** There is a bug in that will be fixed after WL#2687. Please, check BUG#47175 for further details.
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
TRUNCATE TABLE nt_2;
TRUNCATE TABLE tt_2;
INSERT INTO tt_2 VALUES ("new text 7", 7);
BEGIN;
INSERT INTO tt_2 VALUES ("new text 27", 27);
--error ER_DUP_ENTRY
INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
INSERT INTO tt_2 VALUES ("new text 28", 28);
ROLLBACK;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B INSERT M..SELECT* C" with an error in INSERT M...SELECT* generates
--echo *** in the binlog the following entries: "B INSERT M..SELECT* R".
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
TRUNCATE TABLE nt_2;
TRUNCATE TABLE tt_2;
INSERT INTO tt_2 VALUES ("new text 7", 7);
BEGIN;
--error ER_DUP_ENTRY
INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
COMMIT;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B N N T C" generates in the binlog the "B N C B N C B T C" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
TRUNCATE TABLE nt_1;
TRUNCATE TABLE tt_2;
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 1);
INSERT INTO nt_1 VALUES (USER(), 2);
INSERT INTO tt_2 VALUES (USER(), 3);
COMMIT;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B N N T R" generates in the binlog the "B N C B N C B T R" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 4);
INSERT INTO nt_1 VALUES (USER(), 5);
INSERT INTO tt_2 VALUES (USER(), 6);
ROLLBACK;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B N* N* T C" with error in N* generates in the binlog the "B N R B N R B T C" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
BEGIN;
--error ER_DUP_ENTRY
INSERT INTO nt_1 VALUES (USER(), 7), (USER(), 1);
--error ER_DUP_ENTRY
INSERT INTO nt_1 VALUES (USER(), 8), (USER(), 1);
INSERT INTO tt_2 VALUES (USER(), 9);
COMMIT;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B N* N* T R" with error in N* generates in the binlog the "B N R B N R B T R" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
BEGIN;
--error ER_DUP_ENTRY
INSERT INTO nt_1 VALUES (USER(), 10), (USER(), 1);
--error ER_DUP_ENTRY
INSERT INTO nt_1 VALUES (USER(), 11), (USER(), 1);
INSERT INTO tt_2 VALUES (USER(), 12);
ROLLBACK;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B N N T N T C" generates in the binlog the "B N C B N C B T N T C" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 13);
INSERT INTO nt_1 VALUES (USER(), 14);
INSERT INTO tt_2 VALUES (USER(), 15);
INSERT INTO nt_1 VALUES (USER(), 16);
INSERT INTO tt_2 VALUES (USER(), 17);
COMMIT;
--source include/show_binlog_events.inc
--echo
--echo
--echo
--echo *** "B N N T N T R" generates in the binlog the "B N C B N C B T N T R" entries
--echo
let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1);
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 18);
INSERT INTO nt_1 VALUES (USER(), 19);
INSERT INTO tt_2 VALUES (USER(), 20);
INSERT INTO nt_1 VALUES (USER(), 21);
INSERT INTO tt_2 VALUES (USER(), 22);
ROLLBACK;
--source include/show_binlog_events.inc
--echo ###################################################################################
--echo # CLEAN
--echo ###################################################################################
DROP TABLE tt_1;
DROP TABLE tt_2;
DROP TABLE nt_1;
DROP TABLE nt_2;
mysql-test/suite/binlog/r/binlog_mixed_failure_mixing_engines.result 0 → 100644
View file @ 2a243fa2
###################################################################################
# CONFIGURATION
###################################################################################
CREATE TABLE nt_1 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
CREATE TABLE nt_2 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
CREATE TABLE tt_1 (a text, b int PRIMARY KEY) ENGINE = Innodb;
CREATE TABLE tt_2 (a text, b int PRIMARY KEY) ENGINE = Innodb;
CREATE TRIGGER tr_i_tt_1_to_nt_1 BEFORE INSERT ON tt_1 FOR EACH ROW
BEGIN
INSERT INTO nt_1 VALUES (NEW.a, NEW.b);
END|
CREATE TRIGGER tr_i_nt_2_to_tt_2 BEFORE INSERT ON nt_2 FOR EACH ROW
BEGIN
INSERT INTO tt_2 VALUES (NEW.a, NEW.b);
END|
###################################################################################
# CHECK HISTORY IN BINLOG
###################################################################################
*** "B M* T C" with error in M* generates in the binlog the "B M* R B T C" entries
INSERT INTO nt_1 VALUES ("new text 1", 1);
BEGIN;
INSERT INTO tt_1 VALUES (USER(), 2), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 3", 3);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; INSERT INTO nt_1 VALUES ("new text 1", 1)
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 3", 3)
master-bin.000001 # Xid # # COMMIT /* XID */
INSERT INTO tt_2 VALUES ("new text 4", 4);
BEGIN;
INSERT INTO nt_2 VALUES (USER(), 5), (USER(), 4);
ERROR 23000: Duplicate entry '4' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 6", 6);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 4", 4)
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 6", 6)
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B M M* T C" with error in M* generates in the binlog the "B M M* T C" entries
INSERT INTO nt_1 VALUES ("new text 10", 10);
BEGIN;
INSERT INTO tt_1 VALUES ("new text 7", 7), ("new text 8", 8);
INSERT INTO tt_1 VALUES (USER(), 9), (USER(), 10);
ERROR 23000: Duplicate entry '10' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 11", 11);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; INSERT INTO nt_1 VALUES ("new text 10", 10)
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_1 VALUES ("new text 7", 7), ("new text 8", 8)
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 11", 11)
master-bin.000001 # Xid # # COMMIT /* XID */
INSERT INTO tt_2 VALUES ("new text 15", 15);
BEGIN;
INSERT INTO nt_2 VALUES ("new text 12", 12), ("new text 13", 13);
INSERT INTO nt_2 VALUES (USER(), 14), (USER(), 15);
ERROR 23000: Duplicate entry '15' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 16", 16);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 15", 15)
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO nt_2 VALUES ("new text 12", 12), ("new text 13", 13)
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 16", 16)
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B M* M* T C" with error in M* generates in the binlog the "B M* R B M* R B T C" entries
INSERT INTO nt_1 VALUES ("new text 18", 18);
INSERT INTO nt_1 VALUES ("new text 20", 20);
BEGIN;
INSERT INTO tt_1 VALUES (USER(), 17), (USER(), 18);
ERROR 23000: Duplicate entry '18' for key 'PRIMARY'
INSERT INTO tt_1 VALUES (USER(), 19), (USER(), 20);
ERROR 23000: Duplicate entry '20' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 21", 21);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; INSERT INTO nt_1 VALUES ("new text 18", 18)
master-bin.000001 # Query # # use `test`; INSERT INTO nt_1 VALUES ("new text 20", 20)
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 21", 21)
master-bin.000001 # Xid # # COMMIT /* XID */
INSERT INTO tt_2 VALUES ("new text 23", 23);
INSERT INTO tt_2 VALUES ("new text 25", 25);
BEGIN;
INSERT INTO nt_2 VALUES (USER(), 22), (USER(), 23);
ERROR 23000: Duplicate entry '23' for key 'PRIMARY'
INSERT INTO nt_2 VALUES (USER(), 24), (USER(), 25);
ERROR 23000: Duplicate entry '25' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 26", 26);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 23", 23)
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 25", 25)
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 26", 26)
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B T INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates
*** in the binlog the following entries: "Nothing".
*** There is a bug in that will be fixed after WL#2687. Please, check BUG#47175 for further details.
TRUNCATE TABLE nt_2;
TRUNCATE TABLE tt_2;
INSERT INTO tt_2 VALUES ("new text 7", 7);
BEGIN;
INSERT INTO tt_2 VALUES ("new text 27", 27);
INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
ERROR 23000: Duplicate entry '7' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 28", 28);
ROLLBACK;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE nt_2
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE tt_2
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 7", 7)
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B INSERT M..SELECT* C" with an error in INSERT M...SELECT* generates
*** in the binlog the following entries: "B INSERT M..SELECT* R".
TRUNCATE TABLE nt_2;
TRUNCATE TABLE tt_2;
INSERT INTO tt_2 VALUES ("new text 7", 7);
BEGIN;
INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
ERROR 23000: Duplicate entry '7' for key 'PRIMARY'
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE nt_2
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE tt_2
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; INSERT INTO tt_2 VALUES ("new text 7", 7)
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
*** "B N N T C" generates in the binlog the "B N C B N C B T C" entries
TRUNCATE TABLE nt_1;
TRUNCATE TABLE tt_2;
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 1);
INSERT INTO nt_1 VALUES (USER(), 2);
INSERT INTO tt_2 VALUES (USER(), 3);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE nt_1
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE tt_2
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B N N T R" generates in the binlog the "B N C B N C B T R" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 4);
INSERT INTO nt_1 VALUES (USER(), 5);
INSERT INTO tt_2 VALUES (USER(), 6);
ROLLBACK;
Warnings:
Warning 1196 Some non-transactional changed tables couldn't be rolled back
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
*** "B N* N* T C" with error in N* generates in the binlog the "B N R B N R B T C" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 7), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO nt_1 VALUES (USER(), 8), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO tt_2 VALUES (USER(), 9);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B N* N* T R" with error in N* generates in the binlog the "B N R B N R B T R" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 10), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO nt_1 VALUES (USER(), 11), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO tt_2 VALUES (USER(), 12);
ROLLBACK;
Warnings:
Warning 1196 Some non-transactional changed tables couldn't be rolled back
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
*** "B N N T N T C" generates in the binlog the "B N C B N C B T N T C" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 13);
INSERT INTO nt_1 VALUES (USER(), 14);
INSERT INTO tt_2 VALUES (USER(), 15);
INSERT INTO nt_1 VALUES (USER(), 16);
INSERT INTO tt_2 VALUES (USER(), 17);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B N N T N T R" generates in the binlog the "B N C B N C B T N T R" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 18);
INSERT INTO nt_1 VALUES (USER(), 19);
INSERT INTO tt_2 VALUES (USER(), 20);
INSERT INTO nt_1 VALUES (USER(), 21);
INSERT INTO tt_2 VALUES (USER(), 22);
ROLLBACK;
Warnings:
Warning 1196 Some non-transactional changed tables couldn't be rolled back
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
###################################################################################
# CLEAN
###################################################################################
DROP TABLE tt_1;
DROP TABLE tt_2;
DROP TABLE nt_1;
DROP TABLE nt_2;
mysql-test/suite/binlog/r/binlog_row_failure_mixing_engines.result 0 → 100644
View file @ 2a243fa2
###################################################################################
# CONFIGURATION
###################################################################################
CREATE TABLE nt_1 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
CREATE TABLE nt_2 (a text, b int PRIMARY KEY) ENGINE = MyISAM;
CREATE TABLE tt_1 (a text, b int PRIMARY KEY) ENGINE = Innodb;
CREATE TABLE tt_2 (a text, b int PRIMARY KEY) ENGINE = Innodb;
CREATE TRIGGER tr_i_tt_1_to_nt_1 BEFORE INSERT ON tt_1 FOR EACH ROW
BEGIN
INSERT INTO nt_1 VALUES (NEW.a, NEW.b);
END|
CREATE TRIGGER tr_i_nt_2_to_tt_2 BEFORE INSERT ON nt_2 FOR EACH ROW
BEGIN
INSERT INTO tt_2 VALUES (NEW.a, NEW.b);
END|
###################################################################################
# CHECK HISTORY IN BINLOG
###################################################################################
*** "B M* T C" with error in M* generates in the binlog the "B M* R B T C" entries
INSERT INTO nt_1 VALUES ("new text 1", 1);
BEGIN;
INSERT INTO tt_1 VALUES (USER(), 2), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 3", 3);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
INSERT INTO tt_2 VALUES ("new text 4", 4);
BEGIN;
INSERT INTO nt_2 VALUES (USER(), 5), (USER(), 4);
ERROR 23000: Duplicate entry '4' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 6", 6);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B M M* T C" with error in M* generates in the binlog the "B M M* T C" entries
INSERT INTO nt_1 VALUES ("new text 10", 10);
BEGIN;
INSERT INTO tt_1 VALUES ("new text 7", 7), ("new text 8", 8);
INSERT INTO tt_1 VALUES (USER(), 9), (USER(), 10);
ERROR 23000: Duplicate entry '10' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 11", 11);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
INSERT INTO tt_2 VALUES ("new text 15", 15);
BEGIN;
INSERT INTO nt_2 VALUES ("new text 12", 12), ("new text 13", 13);
INSERT INTO nt_2 VALUES (USER(), 14), (USER(), 15);
ERROR 23000: Duplicate entry '15' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 16", 16);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B M* M* T C" with error in M* generates in the binlog the "B M* R B M* R B T C" entries
INSERT INTO nt_1 VALUES ("new text 18", 18);
INSERT INTO nt_1 VALUES ("new text 20", 20);
BEGIN;
INSERT INTO tt_1 VALUES (USER(), 17), (USER(), 18);
ERROR 23000: Duplicate entry '18' for key 'PRIMARY'
INSERT INTO tt_1 VALUES (USER(), 19), (USER(), 20);
ERROR 23000: Duplicate entry '20' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 21", 21);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_1)
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
INSERT INTO tt_2 VALUES ("new text 23", 23);
INSERT INTO tt_2 VALUES ("new text 25", 25);
BEGIN;
INSERT INTO nt_2 VALUES (USER(), 22), (USER(), 23);
ERROR 23000: Duplicate entry '23' for key 'PRIMARY'
INSERT INTO nt_2 VALUES (USER(), 24), (USER(), 25);
ERROR 23000: Duplicate entry '25' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 26", 26);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B T INSERT M...SELECT* C" with an error in INSERT M...SELECT* generates
*** in the binlog the following entries: "Nothing".
*** There is a bug in that will be fixed after WL#2687. Please, check BUG#47175 for further details.
TRUNCATE TABLE nt_2;
TRUNCATE TABLE tt_2;
INSERT INTO tt_2 VALUES ("new text 7", 7);
BEGIN;
INSERT INTO tt_2 VALUES ("new text 27", 27);
INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
ERROR 23000: Duplicate entry '7' for key 'PRIMARY'
INSERT INTO tt_2 VALUES ("new text 28", 28);
ROLLBACK;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE nt_2
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE tt_2
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B INSERT M..SELECT* C" with an error in INSERT M...SELECT* generates
*** in the binlog the following entries: "B INSERT M..SELECT* R".
TRUNCATE TABLE nt_2;
TRUNCATE TABLE tt_2;
INSERT INTO tt_2 VALUES ("new text 7", 7);
BEGIN;
INSERT INTO nt_2(a, b) SELECT USER(), b FROM nt_1;
ERROR 23000: Duplicate entry '7' for key 'PRIMARY'
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE nt_2
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE tt_2
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_2)
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: #
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
*** "B N N T C" generates in the binlog the "B N C B N C B T C" entries
TRUNCATE TABLE nt_1;
TRUNCATE TABLE tt_2;
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 1);
INSERT INTO nt_1 VALUES (USER(), 2);
INSERT INTO tt_2 VALUES (USER(), 3);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE nt_1
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE tt_2
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B N N T R" generates in the binlog the "B N C B N C B T R" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 4);
INSERT INTO nt_1 VALUES (USER(), 5);
INSERT INTO tt_2 VALUES (USER(), 6);
ROLLBACK;
Warnings:
Warning 1196 Some non-transactional changed tables couldn't be rolled back
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
*** "B N* N* T C" with error in N* generates in the binlog the "B N R B N R B T C" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 7), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO nt_1 VALUES (USER(), 8), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO tt_2 VALUES (USER(), 9);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B N* N* T R" with error in N* generates in the binlog the "B N R B N R B T R" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 10), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO nt_1 VALUES (USER(), 11), (USER(), 1);
ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
INSERT INTO tt_2 VALUES (USER(), 12);
ROLLBACK;
Warnings:
Warning 1196 Some non-transactional changed tables couldn't be rolled back
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
*** "B N N T N T C" generates in the binlog the "B N C B N C B T N T C" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 13);
INSERT INTO nt_1 VALUES (USER(), 14);
INSERT INTO tt_2 VALUES (USER(), 15);
INSERT INTO nt_1 VALUES (USER(), 16);
INSERT INTO tt_2 VALUES (USER(), 17);
COMMIT;
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
*** "B N N T N T R" generates in the binlog the "B N C B N C B T N T R" entries
BEGIN;
INSERT INTO nt_1 VALUES (USER(), 18);
INSERT INTO nt_1 VALUES (USER(), 19);
INSERT INTO tt_2 VALUES (USER(), 20);
INSERT INTO nt_1 VALUES (USER(), 21);
INSERT INTO tt_2 VALUES (USER(), 22);
ROLLBACK;
Warnings:
Warning 1196 Some non-transactional changed tables couldn't be rolled back
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.nt_1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Table_map # # table_id: # (test.tt_2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
###################################################################################
# CLEAN
###################################################################################
DROP TABLE tt_1;
DROP TABLE tt_2;
DROP TABLE nt_1;
DROP TABLE nt_2;
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
View file @ 2a243fa2
......@@ -133,6 +133,10 @@ master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
insert into t1 values(11);
commit;
show binlog events from <binlog_start>;
......@@ -144,6 +148,8 @@ master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
......@@ -272,6 +278,10 @@ master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # use `test`; drop table t1,t2
master-bin.000001 # Query # # use `test`; create table t0 (n int)
master-bin.000001 # Query # # BEGIN
......@@ -372,7 +382,7 @@ master-bin.000001 # Query # # use `test`; DROP TABLE if exists t2
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # use `test`; DROP TABLE IF EXISTS t2
master-bin.000001 # Query # # use `test`; CREATE TABLE t2 (a int, b int, primary key (a)) engine=innodb
master-bin.000001 # Query # # BEGIN
......@@ -390,9 +400,11 @@ master-bin.000001 # Query # # use `test`; DROP TABLE t2
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
......@@ -400,7 +412,7 @@ master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # ROLLBACK
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # use `test`; TRUNCATE table t2
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
......
mysql-test/suite/binlog/t/binlog_mixed_failure_mixing_engines.test 0 → 100644
View file @ 2a243fa2
--source include/have_binlog_format_mixed.inc
--source include/have_innodb.inc
--source extra/binlog_tests/binlog_failure_mixing_engines.test
mysql-test/suite/binlog/t/binlog_row_failure_mixing_engines.test 0 → 100644
View file @ 2a243fa2
--source include/have_binlog_format_row.inc
--source include/have_innodb.inc
--source extra/binlog_tests/binlog_failure_mixing_engines.test
mysql-test/suite/rpl/r/rpl_row_create_table.result
View file @ 2a243fa2
......@@ -176,7 +176,7 @@ Log_name Pos Event_type Server_id End_log_pos Info
# 106 Query # 174 BEGIN
# 174 Table_map # 216 table_id: # (test.t7)
# 216 Write_rows # 272 table_id: # flags: STMT_END_F
# 272 Query # 343 ROLLBACK
# 272 Query # 341 COMMIT
SELECT * FROM t7 ORDER BY a,b;
a b
1 2
......@@ -327,7 +327,7 @@ Log_name Pos Event_type Server_id End_log_pos Info
# 1329 Query # 1397 BEGIN
# 1397 Table_map # 1438 table_id: # (test.t1)
# 1438 Write_rows # 1482 table_id: # flags: STMT_END_F
# 1482 Query # 1553 ROLLBACK
# 1482 Query # 1551 COMMIT
SHOW TABLES;
Tables_in_test
t1
......
sql/log.cc
View file @ 2a243fa2
......@@ -153,7 +153,7 @@ class Mutex_sentry
class binlog_trx_data {
public:
binlog_trx_data()
: at_least_one_stmt(0), incident(FALSE), m_pending(0),
: at_least_one_stmt_committed(0), incident(FALSE), m_pending(0),
before_stmt_pos(MY_OFF_T_UNDEF)
{
trans_log.end_of_file= max_binlog_cache_size;
......@@ -182,7 +182,10 @@ class binlog_trx_data {
{
DBUG_PRINT("info", ("truncating to position %lu", (ulong) pos));
DBUG_PRINT("info", ("before_stmt_pos=%lu", (ulong) pos));
if (pending())
{
delete pending();
}
set_pending(0);
reinit_io_cache(&trans_log, WRITE_CACHE, pos, 0, 0);
trans_log.end_of_file= max_binlog_cache_size;
......@@ -192,12 +195,12 @@ class binlog_trx_data {
/*
The only valid positions that can be truncated to are at the
beginning of a statement. We are relying on this fact to be able
to set the at_least_one_stmt flag correctly. In other word, if
to set the at_least_one_stmt_committed flag correctly. In other word, if
we are truncating to the beginning of the transaction cache,
there will be no statements in the cache, otherwhise, we will
have at least one statement in the transaction cache.
*/
at_least_one_stmt= (pos > 0);
at_least_one_stmt_committed= (pos > 0);
}
/*
......@@ -239,7 +242,7 @@ class binlog_trx_data {
Boolean that is true if there is at least one statement in the
transaction cache.
*/
bool at_least_one_stmt;
bool at_least_one_stmt_committed;
bool incident;
private:
......@@ -1272,7 +1275,7 @@ static bool stmt_has_updated_trans_table(THD *thd)
{
Ha_trx_info *ha_info;
for (ha_info= thd->transaction.stmt.ha_list; ha_info; ha_info= ha_info->next())
for (ha_info= thd->transaction.stmt.ha_list; ha_info && ha_info->is_started(); ha_info= ha_info->next())
{
if (ha_info->is_trx_read_write() && ha_info->ht() != binlog_hton)
return (TRUE);
......@@ -1535,13 +1538,17 @@ static int binlog_commit(handlerton *hton, THD *thd, bool all)
YESNO(in_transaction),
YESNO(thd->transaction.all.modified_non_trans_table),
YESNO(thd->transaction.stmt.modified_non_trans_table)));
if (!in_transaction || all)
if (!in_transaction || all ||
(!all && !trx_data->at_least_one_stmt_committed &&
!stmt_has_updated_trans_table(thd) &&
thd->transaction.stmt.modified_non_trans_table))
{
Query_log_event qev(thd, STRING_WITH_LEN("COMMIT"), TRUE, TRUE, 0);
error= binlog_end_trans(thd, trx_data, &qev, all);
goto end;
}
trx_data->at_least_one_stmt_committed = my_b_tell(&trx_data->trans_log) > 0;
end:
if (!all)
trx_data->before_stmt_pos = MY_OFF_T_UNDEF; // part of the stmt commit
......@@ -1608,15 +1615,18 @@ static int binlog_rollback(handlerton *hton, THD *thd, bool all)
{
/*
We flush the cache with a rollback, wrapped in a beging/rollback if:
. aborting a transcation that modified a non-transactional table or;
. aborting a transaction that modified a non-transactional table;
. aborting a statement that modified both transactional and
non-transctional tables but which is not in the boundaries of any
transaction;
non-transactional tables but which is not in the boundaries of any
transaction or there was no early change;
. the OPTION_KEEP_LOG is activate.
*/
if ((all && thd->transaction.all.modified_non_trans_table) ||
(!all && thd->transaction.stmt.modified_non_trans_table &&
!(thd->options & (OPTION_BEGIN | OPTION_NOT_AUTOCOMMIT))) ||
(!all && thd->transaction.stmt.modified_non_trans_table &&
!trx_data->at_least_one_stmt_committed &&
thd->current_stmt_binlog_row_based) ||
((thd->options & OPTION_KEEP_LOG)))
{
Query_log_event qev(thd, STRING_WITH_LEN("ROLLBACK"), TRUE, TRUE, 0);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7