Skip to content

M
MariaDB
Commit 36cb3320 authored by unknown's avatar unknown
Browse files
Options

Merge bk-internal:/home/bk/mysql-5.1-new-maint 

into  shellback.(none):/home/msvensson/mysql/mysql-5.1-new-maint


mysql-test/mysql-test-run.pl:
  Manual merge
parents 3be8b9a3 60f1320e
Show whitespace changes
Inline Side-by-side
Showing with 317 additions and 226 deletions
mysql-test/lib/mtr_process.pl
View file @ 36cb3320
......@@ -633,7 +633,7 @@ sub mtr_check_stop_servers ($) {
}
else
{
mtr_verbose("All ports where free, continuing");
mtr_verbose("All ports were free, continuing");
}
}
}
......@@ -896,6 +896,7 @@ sub check_expected_crash_and_restart($)
sub mtr_record_dead_children () {
my $process_died= 0;
my $ret_pid;
# Wait without blockinng to see if any processes had died
......@@ -904,7 +905,9 @@ sub mtr_record_dead_children () {
{
mtr_warning("mtr_record_dead_children: $ret_pid");
mark_process_dead($ret_pid);
$process_died= 1;
}
return $process_died;
}
sub start_reap_all {
......
mysql-test/mysql-test-run.pl
View file @ 36cb3320
......@@ -358,7 +358,7 @@ sub initialize_servers ();
sub mysql_install_db ();
sub install_db ($$);
sub run_testcase ($);
sub run_testcase_stop_servers ($);
sub run_testcase_stop_servers ($$$);
sub run_testcase_start_servers ($);
sub report_failure_and_restart ($);
sub do_before_start_master ($$);
......@@ -1310,9 +1310,19 @@ sub executable_setup () {
}
sub generate_cmdline_mysqldump ($) {
my($mysqld) = @_;
return
"$exe_mysqldump --no-defaults -uroot " .
"--port=$mysqld->{'port'} " .
"--socket=$mysqld->{'path_sock'} --password=";
}
##############################################################################
#
# Set environment to be used by childs of this process
# Set environment to be used by childs of this process for
# things that are constant duting the whole lifetime of mysql-test-run.pl
#
##############################################################################
......@@ -1337,18 +1347,11 @@ sub environment_setup () {
($ENV{'DYLD_LIBRARY_PATH'} ? ":$ENV{'DYLD_LIBRARY_PATH'}" : "");
}
# --------------------------------------------------------------------------
# Add the path where mysqld will find udf_example.so
# --------------------------------------------------------------------------
$ENV{'LD_LIBRARY_PATH'}=
($lib_udf_example ? dirname($lib_udf_example) : "") .
($ENV{'LD_LIBRARY_PATH'} ? ":$ENV{'LD_LIBRARY_PATH'}" : "");
# --------------------------------------------------------------------------
# Also command lines in .opt files may contain env vars
# --------------------------------------------------------------------------
$ENV{'CHARSETSDIR'}= $path_charsetsdir;
$ENV{'UMASK'}= "0660"; # The octal *string*
$ENV{'UMASK_DIR'}= "0770"; # The octal *string*
$ENV{'LC_COLLATE'}= "C";
......@@ -1366,10 +1369,30 @@ sub environment_setup () {
# $ENV{'MYSQL_TCP_PORT'}= '@MYSQL_TCP_PORT@'; # FIXME
$ENV{'MYSQL_TCP_PORT'}= 3306;
$ENV{MTR_BUILD_THREAD}= 0 unless $ENV{MTR_BUILD_THREAD}; # Set if not set
# ----------------------------------------------------
# Setup env for NDB
# ----------------------------------------------------
$ENV{'NDB_MGM'}= $exe_ndb_mgm;
$ENV{'NDBCLUSTER_PORT'}= $opt_ndbcluster_port;
$ENV{'NDBCLUSTER_PORT_SLAVE'}=$opt_ndbcluster_port_slave;
$ENV{'NDB_STATUS_OK'}= "YES";
$ENV{'NDBCLUSTER_PORT_SLAVE'}= $opt_ndbcluster_port_slave;
$ENV{'NDB_STATUS_OK'}= $clusters->[0]->{'installed_ok'};
$ENV{'NDB_SLAVE_STATUS_OK'}= $clusters->[0]->{'installed_ok'};;
$ENV{'NDB_EXTRA_TEST'}= $opt_ndb_extra_test;
$ENV{'NDB_BACKUP_DIR'}= $clusters->[0]->{'data_dir'};
$ENV{'NDB_DATA_DIR'}= $clusters->[0]->{'data_dir'};
$ENV{'NDB_TOOLS_DIR'}= $path_ndb_tools_dir;
$ENV{'NDB_TOOLS_OUTPUT'}= $file_ndb_testrun_log;
$ENV{'NDB_CONNECTSTRING'}= $opt_ndbconnectstring;
# ----------------------------------------------------
# Setup env for IM
# ----------------------------------------------------
$ENV{'IM_EXE'}= $exe_im;
$ENV{'IM_PATH_PID'}= $instance_manager->{path_pid};
$ENV{'IM_PATH_ANGEL_PID'}= $instance_manager->{path_angel_pid};
......@@ -1384,9 +1407,174 @@ sub environment_setup () {
$ENV{'IM_MYSQLD2_PORT'}= $instance_manager->{instances}->[1]->{port};
$ENV{'IM_MYSQLD2_PATH_PID'}=$instance_manager->{instances}->[1]->{path_pid};
$ENV{MTR_BUILD_THREAD}= 0 unless $ENV{MTR_BUILD_THREAD}; # Set if not set
# ----------------------------------------------------
# Setup env so childs can execute mysqlcheck
# ----------------------------------------------------
my $cmdline_mysqlcheck=
"$exe_mysqlcheck --no-defaults -uroot " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'} --password=";
if ( $opt_debug )
{
$cmdline_mysqlcheck .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlcheck.trace";
}
$ENV{'MYSQL_CHECK'}= $cmdline_mysqlcheck;
# ----------------------------------------------------
# Setup env to childs can execute myqldump
# ----------------------------------------------------
my $cmdline_mysqldump= generate_cmdline_mysqldump($master->[0]);
my $cmdline_mysqldumpslave= generate_cmdline_mysqldump($slave->[0]);
if ( $opt_debug )
{
$cmdline_mysqldump .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqldump-master.trace";
$cmdline_mysqldumpslave .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqldump-slave.trace";
}
$ENV{'MYSQL_DUMP'}= $cmdline_mysqldump;
$ENV{'MYSQL_DUMP_SLAVE'}= $cmdline_mysqldumpslave;
# ----------------------------------------------------
# Setup env so childs can execute mysqlslap
# ----------------------------------------------------
unless ( $glob_win32 )
{
my $cmdline_mysqlslap=
"$exe_mysqlslap -uroot " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'} --password= " .
"--lock-directory=$opt_tmpdir";
if ( $opt_debug )
{
$cmdline_mysqlslap .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlslap.trace";
}
$ENV{'MYSQL_SLAP'}= $cmdline_mysqlslap;
}
# ----------------------------------------------------
# Setup env so childs can execute mysqlimport
# ----------------------------------------------------
my $cmdline_mysqlimport=
"$exe_mysqlimport -uroot " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'} --password=";
if ( $opt_debug )
{
$cmdline_mysqlimport .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlimport.trace";
}
$ENV{'MYSQL_IMPORT'}= $cmdline_mysqlimport;
# ----------------------------------------------------
# Setup env so childs can execute mysqlshow
# ----------------------------------------------------
my $cmdline_mysqlshow=
"$exe_mysqlshow -uroot " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'} --password=";
if ( $opt_debug )
{
$cmdline_mysqlshow .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlshow.trace";
}
$ENV{'MYSQL_SHOW'}= $cmdline_mysqlshow;
# ----------------------------------------------------
# Setup env so childs can execute mysqlbinlog
# ----------------------------------------------------
my $cmdline_mysqlbinlog=
"$exe_mysqlbinlog" .
" --no-defaults --local-load=$opt_tmpdir" .
" --character-sets-dir=$path_charsetsdir";
if ( $opt_debug )
{
$cmdline_mysqlbinlog .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlbinlog.trace";
}
$ENV{'MYSQL_BINLOG'}= $cmdline_mysqlbinlog;
# ----------------------------------------------------
# Setup env so childs can execute mysql
# ----------------------------------------------------
my $cmdline_mysql=
"$exe_mysql --no-defaults --host=localhost --user=root --password= " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'}";
$ENV{'MYSQL'}= $cmdline_mysql;
# ----------------------------------------------------
# Setup env so childs can execute mysql_client_test
# ----------------------------------------------------
my $cmdline_mysql_client_test=
"$exe_mysql_client_test --no-defaults --testcase --user=root --silent " .
"--port=$master->[0]->{'port'} " .
"--vardir=$opt_vardir " .
"--socket=$master->[0]->{'path_sock'}";
if ( $opt_debug )
{
$cmdline_mysql_client_test .=
" --debug=d:t:A,$opt_vardir_trace/log/mysql_client_test.trace";
}
if ( $glob_use_embedded_server )
{
$cmdline_mysql_client_test.=
" -A --language=$path_language" .
" -A --datadir=$slave->[0]->{'path_myddir'}" .
" -A --character-sets-dir=$path_charsetsdir";
}
$ENV{'MYSQL_CLIENT_TEST'}= $cmdline_mysql_client_test;
# ----------------------------------------------------
# Setup env so childs can execute mysql_fix_system_tables
# ----------------------------------------------------
my $cmdline_mysql_fix_system_tables=
"$exe_mysql_fix_system_tables --no-defaults --host=localhost --user=root --password= " .
"--basedir=$glob_basedir --bindir=$path_client_bindir --verbose " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'}";
$ENV{'MYSQL_FIX_SYSTEM_TABLES'}= $cmdline_mysql_fix_system_tables;
# ----------------------------------------------------
# Setup env so childs can execute my_print_defaults
# ----------------------------------------------------
$ENV{'MYSQL_MY_PRINT_DEFAULTS'}= $exe_my_print_defaults;
# ----------------------------------------------------
# Setup env so childs can execute perror
# ----------------------------------------------------
$ENV{'MY_PERROR'}= $exe_perror;
# ----------------------------------------------------
# Add the path where mysqld will find udf_example.so
# ----------------------------------------------------
$ENV{'UDF_EXAMPLE_LIB'}=
($lib_udf_example ? basename($lib_udf_example) : "");
$ENV{'LD_LIBRARY_PATH'}=
($lib_udf_example ? dirname($lib_udf_example) : "") .
($ENV{'LD_LIBRARY_PATH'} ? ":$ENV{'LD_LIBRARY_PATH'}" : "");
# ----------------------------------------------------
# We are nice and report a bit about our settings
# ----------------------------------------------------
if (!$opt_extern)
{
print "Using MTR_BUILD_THREAD = $ENV{MTR_BUILD_THREAD}\n";
......@@ -2296,15 +2484,19 @@ sub run_testcase ($) {
return;
}
run_testcase_stop_servers($tinfo);
my $master_restart= run_testcase_need_master_restart($tinfo);
my $slave_restart= run_testcase_need_slave_restart($tinfo);
if ($master_restart or $slave_restart)
{
run_testcase_stop_servers($tinfo, $master_restart, $slave_restart);
}
# ----------------------------------------------------------------------
# Prepare to start masters. Even if we use embedded, we want to run
# the preparation.
# ----------------------------------------------------------------------
$ENV{'TZ'}= $tinfo->{'timezone'};
mtr_tofile($master->[0]->{'path_myerr'},"CURRENT_TEST: $tname\n");
if ( $master->[1]->{'pid'} )
{
......@@ -2315,12 +2507,15 @@ sub run_testcase ($) {
# If any mysqld servers running died, we have to know
# ----------------------------------------------------------------------
mtr_record_dead_children();
my $died= mtr_record_dead_children();
# ----------------------------------------------------------------------
# Start masters needed by the testcase
# ----------------------------------------------------------------------
if ($died or $master_restart or $slave_restart)
{
run_testcase_start_servers($tinfo);
}
# ----------------------------------------------------------------------
# If --start-and-exit or --start-dirty given, stop here to let user manually
......@@ -2337,8 +2532,6 @@ sub run_testcase ($) {
# Run the test case
# ----------------------------------------------------------------------
mtr_report_test_name($tinfo);
{
# remove the old reject file
if ( $opt_suite eq "main" )
......@@ -2352,6 +2545,7 @@ sub run_testcase ($) {
unlink($path_timefile);
my $res= run_mysqltest($tinfo);
mtr_report_test_name($tinfo);
if ( $res == 0 )
{
mtr_report_test_passed($tinfo);
......@@ -3004,24 +3198,9 @@ sub stop_all_servers () {
}
# ----------------------------------------------------------------------
# If not using a running servers we may need to stop and restart.
# We restart in the case we have initiation scripts, server options
# etc to run. But we also restart again after the test first restart
# and test is run, to get back to normal server settings.
#
# To make the code a bit more clean, we actually only stop servers
# here, and mark this to be done. Then a generic "start" part will
# start up the needed servers again.
# ----------------------------------------------------------------------
sub run_testcase_stop_servers($) {
my $tinfo= shift;
if ( $glob_use_running_server || $glob_use_embedded_server )
{
return;
}
sub run_testcase_need_master_restart($)
{
my ($tinfo)= @_;
# We try to find out if we are to restart the master(s)
my $do_restart= 0; # Assumes we don't have to
......@@ -3078,6 +3257,91 @@ sub run_testcase_stop_servers($) {
join(" ", @{$master->[0]->{'start_opts'}}) . "'" );
}
return $do_restart;
}
sub run_testcase_need_slave_restart($)
{
my ($tinfo)= @_;
# We try to find out if we are to restart the slaves
my $do_slave_restart= 0; # Assumes we don't have to
# FIXME only restart slave when necessary
$do_slave_restart= 1;
# if ( ! $slave->[0]->{'pid'} )
# {
# # mtr_verbose("Slave not started, no need to check slave restart");
# }
# elsif ( $do_restart )
# {
# $do_slave_restart= 1; # Always restart if master restart
# mtr_verbose("Restart slave because: Master restart");
# }
# elsif ( $tinfo->{'slave_sh'} )
# {
# $do_slave_restart= 1; # Always restart if script to run
# mtr_verbose("Restart slave because: Always restart if script to run");
# }
# elsif ( ! $opt_skip_ndbcluster_slave and
# $tinfo->{'ndb_test'} == 0 and
# $clusters->[1]->{'pid'} != 0 )
# {
# $do_slave_restart= 1; # Restart without slave cluster
# mtr_verbose("Restart slave because: Test does not need slave cluster");
# }
# elsif ( ! $opt_with_ndbcluster_slave and
# $tinfo->{'ndb_test'} == 1 and
# $clusters->[1]->{'pid'} == 0 )
# {
# $do_slave_restart= 1; # Restart with slave cluster
# mtr_verbose("Restart slave because: Test need slave cluster");
# }
# elsif ( $tinfo->{'slave_restart'} )
# {
# $do_slave_restart= 1;
# mtr_verbose("Restart slave because: slave_restart");
# }
# elsif ( $slave->[0]->{'running_slave_is_special'} )
# {
# $do_slave_restart= 1;
# mtr_verbose("Restart slave because: running_slave_is_special");
# }
# # Check that running slave was started with same options
# # as the current test requires
# elsif (! mtr_same_opts($slave->[0]->{'start_opts'},
# $tinfo->{'slave_opt'}) )
# {
# $do_slave_restart= 1;
# mtr_verbose("Restart slave because: running with different options '" .
# join(" ", @{$tinfo->{'slave_opt'}}) . "' != '" .
# join(" ", @{$slave->[0]->{'start_opts'}}) . "'" );
# }
return $do_slave_restart;
}
# ----------------------------------------------------------------------
# If not using a running servers we may need to stop and restart.
# We restart in the case we have initiation scripts, server options
# etc to run. But we also restart again after the test first restart
# and test is run, to get back to normal server settings.
#
# To make the code a bit more clean, we actually only stop servers
# here, and mark this to be done. Then a generic "start" part will
# start up the needed servers again.
# ----------------------------------------------------------------------
sub run_testcase_stop_servers($$$) {
my ($tinfo, $do_restart, $do_slave_restart)= @_;
if ( $glob_use_running_server || $glob_use_embedded_server )
{
return;
}
my $pid;
my %admin_pids; # hash of admin processes that requests shutdown
my @kill_pids; # list of processes to shutdown/kill
......@@ -3135,62 +3399,7 @@ sub run_testcase_stop_servers($) {
}
}
# We try to find out if we are to restart the slaves
my $do_slave_restart= 0; # Assumes we don't have to
# FIXME only restaret when necessary
$do_slave_restart= 1;
# if ( ! $slave->[0]->{'pid'} )
# {
# # mtr_verbose("Slave not started, no need to check slave restart");
# }
# elsif ( $do_restart )
# {
# $do_slave_restart= 1; # Always restart if master restart
# mtr_verbose("Restart slave because: Master restart");
# }
# elsif ( $tinfo->{'slave_sh'} )
# {
# $do_slave_restart= 1; # Always restart if script to run
# mtr_verbose("Restart slave because: Always restart if script to run");
# }
# elsif ( ! $opt_skip_ndbcluster_slave and
# $tinfo->{'ndb_test'} == 0 and
# $clusters->[1]->{'pid'} != 0 )
# {
# $do_slave_restart= 1; # Restart without slave cluster
# mtr_verbose("Restart slave because: Test does not need slave cluster");
# }
# elsif ( ! $opt_with_ndbcluster_slave and
# $tinfo->{'ndb_test'} == 1 and
# $clusters->[1]->{'pid'} == 0 )
# {
# $do_slave_restart= 1; # Restart with slave cluster
# mtr_verbose("Restart slave because: Test need slave cluster");
# }
# elsif ( $tinfo->{'slave_restart'} )
# {
# $do_slave_restart= 1;
# mtr_verbose("Restart slave because: slave_restart");
# }
# elsif ( $slave->[0]->{'running_slave_is_special'} )
# {
# $do_slave_restart= 1;
# mtr_verbose("Restart slave because: running_slave_is_special");
# }
# # Check that running slave was started with same options
# # as the current test requires
# elsif (! mtr_same_opts($slave->[0]->{'start_opts'},
# $tinfo->{'slave_opt'}) )
# {
# $do_slave_restart= 1;
# mtr_verbose("Restart slave because: running with different options '" .
# join(" ", @{$tinfo->{'slave_opt'}}) . "' != '" .
# join(" ", @{$slave->[0]->{'start_opts'}}) . "'" );
# }
if ( $do_slave_restart )
if ( $do_restart || $do_slave_restart )
{
delete $slave->[0]->{'running_slave_is_special'}; # Forget history
......@@ -3674,136 +3883,9 @@ sub run_check_testcase ($$) {
}
sub generate_cmdline_mysqldump ($) {
my($info) = @_;
return
"$exe_mysqldump --no-defaults -uroot " .
"--port=$info->[0]->{'port'} " .
"--socket=$info->[0]->{'path_sock'} --password=";
}
sub run_mysqltest ($) {
my $tinfo= shift;
my $cmdline_mysqlcheck= "$exe_mysqlcheck --no-defaults -uroot " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'} --password=";
if ( $opt_debug )
{
$cmdline_mysqlcheck .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlcheck.trace";
}
my $cmdline_mysqldump= generate_cmdline_mysqldump $master;
my $cmdline_mysqldumpslave= generate_cmdline_mysqldump $slave;
if ( $opt_debug )
{
$cmdline_mysqldump .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqldump-master.trace";
$cmdline_mysqldumpslave .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqldump-slave.trace";
}
my $cmdline_mysqlslap;
unless ( $glob_win32 )
{
$cmdline_mysqlslap= "$exe_mysqlslap -uroot " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'} --password= " .
"--lock-directory=$opt_tmpdir";
if ( $opt_debug )
{
$cmdline_mysqlslap .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlslap.trace";
}
}
my $cmdline_mysqlimport= "$exe_mysqlimport -uroot " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'} --password=";
if ( $opt_debug )
{
$cmdline_mysqlimport .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlimport.trace";
}
my $cmdline_mysqlshow= "$exe_mysqlshow -uroot " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'} --password=";
if ( $opt_debug )
{
$cmdline_mysqlshow .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlshow.trace";
}
my $cmdline_mysqlbinlog=
"$exe_mysqlbinlog" .
" --no-defaults --local-load=$opt_tmpdir" .
" --character-sets-dir=$path_charsetsdir";
if ( $opt_debug )
{
$cmdline_mysqlbinlog .=
" --debug=d:t:A,$opt_vardir_trace/log/mysqlbinlog.trace";
}
my $cmdline_mysql=
"$exe_mysql --no-defaults --host=localhost --user=root --password= " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'}";
my $cmdline_mysql_client_test=
"$exe_mysql_client_test --no-defaults --testcase --user=root --silent " .
"--port=$master->[0]->{'port'} " .
"--vardir=$opt_vardir " .
"--socket=$master->[0]->{'path_sock'}";
if ( $opt_debug )
{
$cmdline_mysql_client_test .=
" --debug=d:t:A,$opt_vardir_trace/log/mysql_client_test.trace";
}
if ( $glob_use_embedded_server )
{
$cmdline_mysql_client_test.=
" -A --language=$path_language" .
" -A --datadir=$slave->[0]->{'path_myddir'}" .
" -A --character-sets-dir=$path_charsetsdir";
}
my $cmdline_mysql_fix_system_tables=
"$exe_mysql_fix_system_tables --no-defaults --host=localhost --user=root --password= " .
"--basedir=$glob_basedir --bindir=$path_client_bindir --verbose " .
"--port=$master->[0]->{'port'} " .
"--socket=$master->[0]->{'path_sock'}";
$ENV{'MYSQL'}= $cmdline_mysql;
$ENV{'MYSQL_CHECK'}= $cmdline_mysqlcheck;
$ENV{'MYSQL_DUMP'}= $cmdline_mysqldump;
$ENV{'MYSQL_SLAP'}= $cmdline_mysqlslap unless $glob_win32;
$ENV{'MYSQL_IMPORT'}= $cmdline_mysqlimport;
$ENV{'MYSQL_DUMP_SLAVE'}= $cmdline_mysqldumpslave;
$ENV{'MYSQL_SHOW'}= $cmdline_mysqlshow;
$ENV{'MYSQL_BINLOG'}= $cmdline_mysqlbinlog;
$ENV{'MYSQL_FIX_SYSTEM_TABLES'}= $cmdline_mysql_fix_system_tables;
$ENV{'MYSQL_CLIENT_TEST'}= $cmdline_mysql_client_test;
$ENV{'CHARSETSDIR'}= $path_charsetsdir;
$ENV{'MYSQL_MY_PRINT_DEFAULTS'}= $exe_my_print_defaults;
$ENV{'UDF_EXAMPLE_LIB'}=
($lib_udf_example ? basename($lib_udf_example) : "");
$ENV{'MY_PERROR'}= $exe_perror;
$ENV{'NDB_STATUS_OK'}= $clusters->[0]->{'installed_ok'};
$ENV{'NDB_SLAVE_STATUS_OK'}= $clusters->[0]->{'installed_ok'};;
$ENV{'NDB_EXTRA_TEST'}= $opt_ndb_extra_test;
$ENV{'NDB_MGM'}= $exe_ndb_mgm;
$ENV{'NDB_BACKUP_DIR'}= $clusters->[0]->{'data_dir'};
$ENV{'NDB_DATA_DIR'}= $clusters->[0]->{'data_dir'};
$ENV{'NDB_TOOLS_DIR'}= $path_ndb_tools_dir;
$ENV{'NDB_TOOLS_OUTPUT'}= $file_ndb_testrun_log;
$ENV{'NDB_CONNECTSTRING'}= $opt_ndbconnectstring;
my ($tinfo)= @_;
my $exe= $exe_mysqltest;
my $args;
......@@ -3882,7 +3964,8 @@ sub run_mysqltest ($) {
if ( $opt_debug )
{
mtr_add_arg($args, "--debug=d:t:A,%s/log/mysqltest.trace", $opt_vardir_trace);
mtr_add_arg($args, "--debug=d:t:A,%s/log/mysqltest.trace",
$opt_vardir_trace);
}
if ( $opt_ssl_supported )
......@@ -3895,9 +3978,9 @@ sub run_mysqltest ($) {
$glob_mysql_test_dir);
}
# Turn on SSL for all test cases
if ( $opt_ssl )
{
# Turn on SSL for _all_ test cases if option --ssl was used
mtr_add_arg($args, "--ssl",
$glob_mysql_test_dir);
}
......@@ -3979,6 +4062,11 @@ sub run_mysqltest ($) {
}
}
# -------------------------------------------------------
# Init variables that change for each testcase
# -------------------------------------------------------
$ENV{'TZ'}= $tinfo->{'timezone'};
my $res = mtr_run_test($exe,$args,"","",$path_timefile,"");
if ( $opt_check_testcases )
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7