Skip to content

M
MariaDB
Commit 451573fa authored by Alice Sherepa's avatar Alice Sherepa
Browse files
Options

MDEV-21360 debug_dbug pre-test value restoration issues

parent 800d1f30
Hide whitespace changes
Inline Side-by-side
Showing with 446 additions and 234 deletions
mysql-test/extra/binlog_tests/binlog_ioerr.inc
View file @ 451573fa
......@@ -15,12 +15,13 @@ RESET MASTER;
CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb;
INSERT INTO t1 VALUES(0);
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug='+d,fail_binlog_write_1';
--error ER_ERROR_ON_WRITE
INSERT INTO t1 VALUES(1);
--error ER_ERROR_ON_WRITE
INSERT INTO t1 VALUES(2);
SET SESSION debug_dbug='';
SET SESSION debug_dbug=@saved_dbug;
INSERT INTO t1 VALUES(3);
SELECT * FROM t1;
......
mysql-test/extra/rpl_tests/rpl_checksum.inc
View file @ 451573fa
......@@ -108,6 +108,7 @@ insert into t1 values (1) /* will not be applied on slave due to simulation */;
# instruction to the dump thread
connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_slave_unaware_checksum';
start slave;
--let $slave_io_errno= 1236
......@@ -116,8 +117,7 @@ source include/wait_for_slave_io_error.inc;
select count(*) as zero from t1;
###connection master;
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
connection slave;
source include/start_slave.inc;
......@@ -129,10 +129,11 @@ source include/start_slave.inc;
# C1. Failure by a client thread
connection master;
set @@global.master_verify_checksum = 1;
set @save_dbug = @@session.debug_dbug;
set @@session.debug_dbug='d,simulate_checksum_test_failure';
--error ER_ERROR_WHEN_EXECUTING_COMMAND
show binlog events;
set @@session.debug_dbug='';
set debug_dbug= @save_dbug;
set @@global.master_verify_checksum = default;
#connection master;
......@@ -149,6 +150,7 @@ connection slave;
# C2. Failure by IO thread
# instruction to io thread
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave io_thread;
# When the checksum error is detected, the slave sets error code 1913
......@@ -158,7 +160,7 @@ start slave io_thread;
--let $slave_io_errno= 1595,1913
--let $show_slave_io_error= 0
source include/wait_for_slave_io_error.inc;
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
# to make IO thread re-read it again w/o the failure
start slave io_thread;
......@@ -179,7 +181,7 @@ source include/wait_for_slave_sql_error.inc;
# resuming SQL thread to parse out the event w/o the failure
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
source include/start_slave.inc;
connection master;
......
mysql-test/extra/rpl_tests/rpl_corruption.inc
View file @ 451573fa
......@@ -73,6 +73,7 @@ while ($i) {
# Emulate corruption in binlog file when SHOW BINLOG EVENTS is executing
--echo # 2. Corruption in master binlog and SHOW BINLOG EVENTS
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char";
--echo SHOW BINLOG EVENTS;
--disable_query_log
......@@ -167,10 +168,10 @@ let $diff_tables= master:test.t1, slave:test.t1;
# Clean up
--echo # 8. Clean up
--connection master
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
SET GLOBAL master_verify_checksum = @old_master_verify_checksum;
DROP TABLE t1;
--sync_slave_with_master
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
--source include/rpl_end.inc
mysql-test/extra/rpl_tests/rpl_incident.inc
View file @ 451573fa
......@@ -20,7 +20,7 @@ CREATE TABLE t1 (a INT);
INSERT INTO t1 VALUES (1),(2),(3);
SELECT * FROM t1;
let $debug_save= `SELECT @@GLOBAL.debug`;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*';
# This will generate an incident log event and store it in the binary
......@@ -29,9 +29,7 @@ REPLACE INTO t1 VALUES (4);
--save_master_pos
SELECT * FROM t1;
--disable_query_log
eval SET GLOBAL debug_dbug= '$debug_save';
--enable_query_log
set @@global.debug_dbug = @saved_dbug;
connection slave;
# Wait until SQL thread stops with error LOST_EVENT on master
......
mysql-test/extra/rpl_tests/rpl_init_slave_errors.inc
View file @ 451573fa
......@@ -51,6 +51,7 @@ reset slave;
connection slave;
# Set debug flags on slave to force errors to occur
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
start slave;
......@@ -66,7 +67,7 @@ start slave;
call mtr.add_suppression("Failed during slave.* thread initialization");
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
######################################################################
# Injecting faults in the init_slave option
......
mysql-test/include/binlog_inject_error.inc
View file @ 451573fa
......@@ -13,10 +13,10 @@
# let query= 'CREATE TABLE t1 (a INT)';
# source include/binlog_inject_error.inc;
#
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
--echo $query;
--replace_regex /(errno: .*)/(errno: #)/
--error ER_ERROR_ON_WRITE
--eval $query
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
mysql-test/r/cache_temporal_4265.result
View file @ 451573fa
create table t1 (a date);
insert t1 values ('2000-01-02'), ('2001-02-03'), ('2002-03-04');
set debug_dbug='d,str_to_datetime_warn';
SET STATEMENT debug_dbug='d,str_to_datetime_warn' for
select * from t1 where a > date_add('2000-01-01', interval 5 day);
a
2001-02-03
2002-03-04
Warnings:
Note 1003 2000-01-01
set debug_dbug='';
drop table t1;
create table t1 (id int not null, ut timestamp(6) not null);
insert into t1 values(1, '2001-01-01 00:00:00.2');
......
mysql-test/r/drop_bad_db_type.result
View file @ 451573fa
SET @save_dbug = @@debug_dbug;
SET @saved_dbug = @@debug_dbug;
set debug_dbug='+d,unstable_db_type';
install soname 'ha_archive';
create table t1 (a int) engine=archive;
......@@ -33,4 +33,4 @@ t1.frm
drop table t1;
db.opt
uninstall soname 'ha_archive';
set debug_dbug=@save_dbug;
set debug_dbug=@saved_dbug;
mysql-test/r/engine_error_in_alter-8453.result
View file @ 451573fa
create table t1 (a int, b int);
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,external_lock_failure';
alter table t1 add column c int;
ERROR HY000: Got error 168 'KABOOM!' from MyISAM
set debug_dbug='';
set debug_dbug= @saved_dbug;
drop table t1;
mysql-test/r/error_simulation.result
View file @ 451573fa
......@@ -10,6 +10,7 @@ INSERT INTO t1 VALUES
('AAAAAAAAAH','AAAAAAAAAH'), ('AAAAAAAAAI','AAAAAAAAAI'),
('AAAAAAAAAJ','AAAAAAAAAJ'), ('AAAAAAAAAK','AAAAAAAAAK');
set tmp_table_size=1024;
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,raise_error";
SELECT MAX(a) FROM t1 GROUP BY a,b;
ERROR 23000: Can't write; duplicate key in table '(temporary)'
......@@ -22,7 +23,7 @@ CREATE TABLE t1 (a INT(100) NOT NULL);
INSERT INTO t1 VALUES (1), (0), (2);
SET SESSION debug_dbug='+d,alter_table_only_index_change';
ALTER TABLE t1 ADD INDEX a(a);
SET SESSION debug_dbug=DEFAULT;
set debug_dbug= @saved_dbug;
SHOW CREATE TABLE t1;
Table Create Table
t1 CREATE TABLE `t1` (
......@@ -42,7 +43,7 @@ CREATE TABLE t1(a BLOB);
SET SESSION debug_dbug="+d,bug42064_simulate_oom";
INSERT INTO t1 VALUES("");
Got one of the listed errors
SET SESSION debug_dbug=DEFAULT;
set debug_dbug= @saved_dbug;
DROP TABLE t1;
#
# Bug#41660: Sort-index_merge for non-first join table may require
......@@ -79,7 +80,7 @@ a a b filler
7 1 1 data
8 1 1 data
9 1 1 data
SET SESSION debug_dbug= DEFAULT;
set debug_dbug= @saved_dbug;
SET optimizer_switch=@save_optimizer_switch;
DROP TABLE t1, t2;
#
......@@ -92,7 +93,7 @@ INSERT INTO t2 VALUES (1),(2);
SET SESSION debug_dbug="+d,bug11747970_raise_error";
INSERT IGNORE INTO t2 SELECT f1 FROM t1 a WHERE NOT EXISTS (SELECT 1 FROM t2 b WHERE a.f1 = b.f1);
ERROR 70100: Query execution was interrupted
SET SESSION debug_dbug = DEFAULT;
set debug_dbug= @saved_dbug;
DROP TABLE t1,t2;
#
# End of 5.1 tests
......@@ -126,4 +127,4 @@ SET SESSION debug_dbug="+d,simulate_create_virtual_tmp_table_out_of_memory";
SELECT f1(1);
Got one of the listed errors
DROP FUNCTION f1;
SET SESSION debug_dbug=DEFAULT;
set debug_dbug= @saved_dbug;
mysql-test/r/func_regexp_pcre_debug.result
View file @ 451573fa
SET debug_dbug='+d,pcre_exec_error_123';
SET STATEMENT debug_dbug='+d,pcre_exec_error_123' for
SELECT 'a' RLIKE 'a';
'a' RLIKE 'a'
0
Warnings:
Warning 1139 Got error 'pcre_exec: Internal error (-123)' from regexp
SET debug_dbug='';
SELECT 'a' RLIKE 'a';
'a' RLIKE 'a'
1
mysql-test/r/log_slow_debug.result
View file @ 451573fa
......@@ -6,7 +6,7 @@ SET @@GLOBAL.log_output='TABLE';
FLUSH SLOW LOGS;
SET @@GLOBAL.slow_query_log=ON;
SET @@GLOBAL.log_slow_admin_statements=ON;
SET @save_dbug = @@debug_dbug;
SET @saved_dbug = @@debug_dbug;
SET SESSION debug_dbug="+d,simulate_slow_query";
CREATE PROCEDURE show_slow_log()
BEGIN
......@@ -130,7 +130,7 @@ sql_text
#
# Clean up
#
SET SESSION debug_dbug=@save_dbug;
SET SESSION debug_dbug=@saved_dbug;
TRUNCATE mysql.slow_log;
SET @@global.slow_query_log= @org_slow_query_log;
SET @@global.log_output= @org_log_output;
......
mysql-test/r/mdev6830.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug= 'd,opt';
CREATE TABLE t1 (pk INT PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (
......@@ -46,3 +47,4 @@ SELECT * FROM t1, v3, t4 WHERE v3.f1 = t4.f1 AND t4.f2 = 6 AND t1.pk = v3.f5;
pk f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 f13 f14 f15 f1 f2
drop table t1,t2,t3,t4;
drop view v2,v3;
set debug_dbug= @saved_dbug;
mysql-test/r/merge-big.result
View file @ 451573fa
......@@ -7,7 +7,7 @@ drop table if exists t1,t2,t3,t4,t5,t6;
CREATE TABLE t1 (c1 INT) ENGINE= MyISAM;
LOCK TABLE t1 WRITE;
connect con1,localhost,root,,;
SET @orig_debug=@@debug;
SET @orig_debug=@@global.debug_dbug;
SET GLOBAL debug_dbug="+d,sleep_open_and_lock_after_open";
INSERT INTO t1 VALUES (1);
connection default;
......
mysql-test/r/merge_debug.result
View file @ 451573fa
......@@ -3,7 +3,7 @@ set global storage_engine=myisam;
set session storage_engine=myisam;
call mtr.add_suppression("Index for table .*crashed' is corrupt; try to repair it");
drop table if exists crashed,t2,t3,t4;
SET @orig_debug=@@debug;
SET @orig_debug=@@global.debug_dbug;
CREATE TABLE crashed (c1 INT);
CREATE TABLE t2 (c1 INT);
CREATE TABLE t3 (c1 INT);
......
mysql-test/r/range_innodb.result
View file @ 451573fa
......@@ -70,6 +70,7 @@ key(a),key(b),key(c)
insert into t1
select A.a+10*B.a, A.a+10*B.a, A.a+10*B.a+100*C.a
from t0 A, t0 B, t0 C, t0 D where D.a<5;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug="+d,ha_index_init_fail";
explain select * from t1 where a=10 and b=10;
id select_type table type possible_keys key key_len ref rows Extra
......@@ -77,5 +78,5 @@ id select_type table type possible_keys key key_len ref rows Extra
select * from t1 where a=10 and b=10;
ERROR HY000: Table definition has changed, please retry transaction
DROP TABLE t0,t1;
set @@global.debug_dbug="-d";
set @@global.debug_dbug = @saved_dbug;
set @@optimizer_switch= @optimizer_switch_save;
mysql-test/r/select_debug.result
View file @ 451573fa
......@@ -6,6 +6,7 @@ insert into t1 values (2,2), (1,1);
create table t2 (a int);
insert into t2 values (2), (3);
set session join_cache_level=3;
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug= 'd,opt';
explain select t1.b from t1,t2 where t1.b=t2.a;
id select_type table type possible_keys key key_len ref rows Extra
......@@ -16,3 +17,4 @@ b
2
set session join_cache_level=default;
drop table t1,t2;
set debug_dbug= @saved_dbug;
mysql-test/r/show_explain_ps.result
View file @ 451573fa
......@@ -17,6 +17,7 @@ connection con1;
connection default;
connection con1;
set @show_explain_probe_select_id=1;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='d,show_explain_probe_join_exec_start';
select count(*) from t0 where a < 100000;
connection default;
......@@ -28,7 +29,7 @@ Note 1003 select count(*) from t0 where a < 100000
connection con1;
count(*)
10
set debug_dbug='';
set debug_dbug= @saved_dbug;
select event_name
from
performance_schema.events_stages_history_long join
......
mysql-test/r/slowlog_enospace-10508.result
View file @ 451573fa
......@@ -3,6 +3,7 @@ create table t1 (a int, b int) engine=memory;
insert t1 select seq, seq+1 from seq_1_to_1000;
set global general_log=0;
set global log_queries_not_using_indexes=1;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,simulate_file_write_error';
select * from t1 where a>10;
select * from t1 where a>10;
......@@ -54,7 +55,7 @@ select * from t1 where a>10;
select * from t1 where a>10;
select * from t1 where a>10;
select * from t1 where a>10;
set debug_dbug='';
set debug_dbug= @saved_dbug;
set global general_log=1;
set global log_queries_not_using_indexes=default;
drop table t1;
mysql-test/r/stat_tables-enospc.result
View file @ 451573fa
call mtr.add_suppression("No space left on device");
create table t1 (a varchar(255), b varchar(255), c varchar(255));
set use_stat_tables=PREFERABLY, optimizer_use_condition_selectivity=3;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,simulate_file_write_error';
set @@max_heap_table_size=128*1024;
analyze table t1;
Table Op Msg_type Msg_text
test.t1 analyze Error Error writing file 'tmp-file' (Errcode: 28 "No space left on device")
test.t1 analyze status Operation failed
set debug_dbug='';
set debug_dbug= @saved_dbug;
drop table t1;
mysql-test/r/union_crash-714.result
View file @ 451573fa
create table t1 (i tinyint);
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,bug11747970_raise_error';
insert into t1 (i) select i from t1 union select i from t1;
ERROR 70100: Query execution was interrupted
drop table t1;
set debug_dbug= @saved_dbug;
mysql-test/r/warnings_debug.result
View file @ 451573fa
drop table if exists t1;
create table t1 (a int primary key) engine=innodb;
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug="+d,warn_during_ha_commit_trans";
INSERT INTO t1 VALUES (1);
Warnings:
......@@ -8,3 +9,4 @@ SHOW WARNINGS;
Level Code Message
Warning 1196 Some non-transactional changed tables couldn't be rolled back
drop table t1;
set debug_dbug= @saved_dbug;
mysql-test/suite/binlog/r/binlog_ioerr.result
View file @ 451573fa
......@@ -2,12 +2,13 @@ CALL mtr.add_suppression("Error writing file 'master-bin'");
RESET MASTER;
CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb;
INSERT INTO t1 VALUES(0);
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug='+d,fail_binlog_write_1';
INSERT INTO t1 VALUES(1);
ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device")
INSERT INTO t1 VALUES(2);
ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device")
SET SESSION debug_dbug='';
SET SESSION debug_dbug=@saved_dbug;
INSERT INTO t1 VALUES(3);
SELECT * FROM t1;
a
......
mysql-test/suite/binlog/r/binlog_write_error.result
View file @ 451573fa
......@@ -12,92 +12,109 @@ DROP VIEW IF EXISTS v1, v2;
#
# Test injecting binlog write error when executing queries
#
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE TABLE t1 (a INT);
CREATE TABLE t1 (a INT);
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
INSERT INTO t1 VALUES (1),(2),(3);
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
INSERT INTO t1 VALUES (4),(5),(6);
INSERT INTO t1 VALUES (4),(5),(6);
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
UPDATE t1 set a=a+1;
UPDATE t1 set a=a+1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DELETE FROM t1;
DELETE FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100);
CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100);
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP TRIGGER tr1;
DROP TRIGGER tr1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
ALTER TABLE t1 ADD (b INT);
ALTER TABLE t1 ADD (b INT);
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE VIEW v1 AS SELECT a FROM t1;
CREATE VIEW v1 AS SELECT a FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP VIEW v1;
DROP VIEW v1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1;
CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP PROCEDURE p1;
DROP PROCEDURE p1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP TABLE t1;
DROP TABLE t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE FUNCTION f1() RETURNS INT return 1;
CREATE FUNCTION f1() RETURNS INT return 1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP FUNCTION f1;
DROP FUNCTION f1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE USER user1;
CREATE USER user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1;
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP USER user1;
DROP USER user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
#
# Cleanup
#
......
mysql-test/suite/binlog_encryption/binlog_ioerr.result
View file @ 451573fa
......@@ -2,12 +2,13 @@ CALL mtr.add_suppression("Error writing file 'master-bin'");
RESET MASTER;
CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb;
INSERT INTO t1 VALUES(0);
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug='+d,fail_binlog_write_1';
INSERT INTO t1 VALUES(1);
ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device")
INSERT INTO t1 VALUES(2);
ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device")
SET SESSION debug_dbug='';
SET SESSION debug_dbug=@saved_dbug;
INSERT INTO t1 VALUES(3);
SELECT * FROM t1;
a
......
mysql-test/suite/binlog_encryption/binlog_write_error.result
View file @ 451573fa
......@@ -12,92 +12,109 @@ DROP VIEW IF EXISTS v1, v2;
#
# Test injecting binlog write error when executing queries
#
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE TABLE t1 (a INT);
CREATE TABLE t1 (a INT);
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
INSERT INTO t1 VALUES (1),(2),(3);
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
INSERT INTO t1 VALUES (4),(5),(6);
INSERT INTO t1 VALUES (4),(5),(6);
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
UPDATE t1 set a=a+1;
UPDATE t1 set a=a+1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DELETE FROM t1;
DELETE FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100);
CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100);
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP TRIGGER tr1;
DROP TRIGGER tr1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
ALTER TABLE t1 ADD (b INT);
ALTER TABLE t1 ADD (b INT);
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE VIEW v1 AS SELECT a FROM t1;
CREATE VIEW v1 AS SELECT a FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP VIEW v1;
DROP VIEW v1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1;
CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP PROCEDURE p1;
DROP PROCEDURE p1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP TABLE t1;
DROP TABLE t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE FUNCTION f1() RETURNS INT return 1;
CREATE FUNCTION f1() RETURNS INT return 1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP FUNCTION f1;
DROP FUNCTION f1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE USER user1;
CREATE USER user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1;
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP USER user1;
DROP USER user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
#
# Cleanup
#
......
mysql-test/suite/binlog_encryption/rpl_checksum.result
View file @ 451573fa
......@@ -76,6 +76,7 @@ connection master;
set @@global.binlog_checksum = CRC32;
insert into t1 values (1) /* will not be applied on slave due to simulation */;
connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_slave_unaware_checksum';
start slave;
include/wait_for_slave_io_error.inc [errno=1236]
......@@ -83,15 +84,16 @@ Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary
select count(*) as zero from t1;
zero
0
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
connection slave;
include/start_slave.inc
connection master;
set @@global.master_verify_checksum = 1;
set @save_dbug = @@session.debug_dbug;
set @@session.debug_dbug='d,simulate_checksum_test_failure';
show binlog events;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
set @@session.debug_dbug='';
set debug_dbug= @save_dbug;
set @@global.master_verify_checksum = default;
connection slave;
connection slave;
......@@ -99,10 +101,11 @@ include/stop_slave.inc
connection master;
create table t2 (a int);
connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave io_thread;
include/wait_for_slave_io_error.inc [errno=1595,1913]
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
start slave io_thread;
include/wait_for_slave_param.inc [Read_Master_Log_Pos]
set @@global.slave_sql_verify_checksum = 1;
......@@ -110,7 +113,7 @@ set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave sql_thread;
include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Error initializing relay log position: I/O error reading event at position 4'
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
include/start_slave.inc
connection master;
connection slave;
......
mysql-test/suite/binlog_encryption/rpl_corruption.result
View file @ 451573fa
......@@ -13,6 +13,7 @@ connection master;
CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY, b VARCHAR(10), c VARCHAR(100));
include/stop_slave.inc
# 2. Corruption in master binlog and SHOW BINLOG EVENTS
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char";
SHOW BINLOG EVENTS;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
......@@ -55,9 +56,9 @@ connection slave;
include/diff_tables.inc [master:test.t1, slave:test.t1]
# 8. Clean up
connection master;
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
SET GLOBAL master_verify_checksum = @old_master_verify_checksum;
DROP TABLE t1;
connection slave;
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_incident.result
View file @ 451573fa
......@@ -14,6 +14,7 @@ a
1
2
3
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*';
REPLACE INTO t1 VALUES (4);
SELECT * FROM t1;
......@@ -22,6 +23,7 @@ a
2
3
4
set @@global.debug_dbug = @saved_dbug;
connection slave;
call mtr.add_suppression("Slave SQL.*The incident LOST_EVENTS occurred on the master.* 1590");
include/wait_for_slave_sql_error.inc [errno=1590]
......
mysql-test/suite/binlog_encryption/rpl_init_slave_errors.result
View file @ 451573fa
......@@ -4,12 +4,13 @@ connection slave;
stop slave;
reset slave;
connection slave;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
start slave;
include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Failed during slave thread initialization'
call mtr.add_suppression("Failed during slave.* thread initialization");
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
connection slave;
reset slave;
SET GLOBAL init_slave= "garbage";
......
mysql-test/suite/innodb/r/blob-update-debug.result
View file @ 451573fa
......@@ -7,9 +7,11 @@ insert into t1 values (1, repeat('*', 50000));
select f1, substring(f2, 1, 40) from t1;
f1 substring(f2, 1, 40)
1 ****************************************
set @saved_debug = @@session.debug_dbug;
set debug_dbug = 'd,row_ins_index_entry_timeout';
update t1 set f1 = 3;
select f1, substring(f2, 1, 40) from t1;
f1 substring(f2, 1, 40)
3 ****************************************
drop table t1;
set debug_dbug= @saved_debug;
mysql-test/suite/innodb/r/innodb-stats-initialize-failure.result
View file @ 451573fa
call mtr.add_suppression("InnoDB: Warning: Index.*");
set @saved_dbug = @@session.debug_dbug;
set DEBUG_DBUG='+d,ib_ha_innodb_stat_not_initialized';
create table t1(a int not null primary key, b int, c int, key(b), key(c)) engine=innodb;
create procedure innodb_insert_proc (repeat_count int)
......@@ -27,6 +28,6 @@ count(1)
select count(1) from t1 where c between 7 and 787;
count(1)
781
set DEBUG_DBUG=NULL;
drop procedure innodb_insert_proc;
drop table t1;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/r/innodb_bug11754376.result
View file @ 451573fa
CREATE TABLE bug11754376 (c INT) ENGINE=INNODB;
set @saved_dbug = @@session.debug_dbug;
SET SESSION DEBUG_DBUG='+d,test_normalize_table_name_low';
DROP TABLE bug11754376;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/r/innodb_bug56947.result
View file @ 451573fa
SET GLOBAL innodb_file_per_table=0;
create table bug56947(a int not null) engine = innodb;
set @saved_dbug = @@session.debug_dbug;
SET DEBUG_DBUG='+d,ib_rebuild_cannot_rename';
alter table bug56947 add unique index (a);
ERROR HY000: Got error 11 "xxx" from storage engine InnoDB
......@@ -8,3 +9,4 @@ Table Op Msg_type Msg_text
test.bug56947 check status OK
drop table bug56947;
SET @@global.innodb_file_per_table=DEFAULT;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/r/innodb_sys_semaphore_waits.result
View file @ 451573fa
......@@ -4,6 +4,7 @@ drop table if exists t1;
connection con1;
create table t1 (id integer, x integer) engine = InnoDB;
insert into t1 values(0, 0);
set @saved_dbug = @@session.debug_dbug;
set DEBUG_DBUG='+d,fatal-semaphore-timeout';
set autocommit=0;
# Sending query on con1,
......@@ -21,6 +22,6 @@ connection default;
# Waitting for reconnect after mysqld restarts
# Reconnected after mysqld was successfully restarted
# Cleaning up before exit
set DEBUG_DBUG=NULL;
set debug_dbug = @saved_dbug;
drop table if exists t1;
# Clean exit
mysql-test/suite/innodb/t/blob-update-debug.test
View file @ 451573fa
......@@ -11,7 +11,9 @@
create table t1 (f1 int primary key, f2 blob) engine = innodb;
insert into t1 values (1, repeat('*', 50000));
select f1, substring(f2, 1, 40) from t1;
set @saved_debug = @@session.debug_dbug;
set debug_dbug = 'd,row_ins_index_entry_timeout';
update t1 set f1 = 3;
select f1, substring(f2, 1, 40) from t1;
drop table t1;
set debug_dbug= @saved_debug;
mysql-test/suite/innodb/t/innodb-stats-initialize-failure.test
View file @ 451573fa
......@@ -6,6 +6,7 @@
call mtr.add_suppression("InnoDB: Warning: Index.*");
# This caused crash earlier
set @saved_dbug = @@session.debug_dbug;
set DEBUG_DBUG='+d,ib_ha_innodb_stat_not_initialized';
create table t1(a int not null primary key, b int, c int, key(b), key(c)) engine=innodb;
......@@ -32,8 +33,8 @@ select count(1) from t1 where a between 5 and 100;
select count(1) from t1 where b between 5 and 256;
select count(1) from t1 where c between 7 and 787;
set DEBUG_DBUG=NULL;
drop procedure innodb_insert_proc;
drop table t1;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/t/innodb_bug11754376.test
View file @ 451573fa
......@@ -8,7 +8,8 @@
CREATE TABLE bug11754376 (c INT) ENGINE=INNODB;
# This will invoke test_normalize_table_name_low() in debug builds
set @saved_dbug = @@session.debug_dbug;
SET SESSION DEBUG_DBUG='+d,test_normalize_table_name_low';
DROP TABLE bug11754376;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/t/innodb_bug56947.test
View file @ 451573fa
......@@ -7,6 +7,7 @@
SET GLOBAL innodb_file_per_table=0;
create table bug56947(a int not null) engine = innodb;
set @saved_dbug = @@session.debug_dbug;
SET DEBUG_DBUG='+d,ib_rebuild_cannot_rename';
--replace_regex /"[^"]*"/"xxx"/
--error ER_GET_ERRNO
......@@ -15,3 +16,4 @@ check table bug56947;
drop table bug56947;
SET @@global.innodb_file_per_table=DEFAULT;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/t/innodb_sys_semaphore_waits.test
View file @ 451573fa
......@@ -17,6 +17,7 @@ eval create table t1 (id integer, x integer) engine = InnoDB;
insert into t1 values(0, 0);
# Enable the debug injection.
set @saved_dbug = @@session.debug_dbug;
set DEBUG_DBUG='+d,fatal-semaphore-timeout';
set autocommit=0;
......@@ -107,7 +108,7 @@ source include/wait_until_connected_again.inc;
--echo # Cleaning up before exit
--disable_warnings
set DEBUG_DBUG=NULL;
set debug_dbug = @saved_dbug;
drop table if exists t1;
--enable_warnings
......
mysql-test/suite/innodb_fts/r/concurrent_insert.result
View file @ 451573fa
......@@ -17,6 +17,7 @@ INSERT INTO t1 VALUES('test');
CREATE TABLE t2 (f1 char(100), FULLTEXT idx1(f1))ENGINE=InnoDB;
INSERT INTO t2 VALUES('mariadb');
connection default;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug ='+d,fts_instrument_sync_request,ib_optimize_wq_hang';
SET DEBUG_SYNC= 'fts_instrument_sync_request
SIGNAL drop_index_start WAIT_FOR sync_op';
......@@ -28,7 +29,7 @@ ALTER TABLE t2 drop index idx1;
connection default;
set DEBUG_SYNC= 'now SIGNAL fts_drop_index';
connection con1;
SET global DEBUG_DBUG=RESET;
set @@global.debug_dbug = @saved_dbug;
drop table t1, t2;
connection default;
set DEBUG_SYNC=RESET;
mysql-test/suite/innodb_fts/t/concurrent_insert.test
View file @ 451573fa
......@@ -29,6 +29,7 @@ CREATE TABLE t2 (f1 char(100), FULLTEXT idx1(f1))ENGINE=InnoDB;
INSERT INTO t2 VALUES('mariadb');
connection default;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug ='+d,fts_instrument_sync_request,ib_optimize_wq_hang';
SET DEBUG_SYNC= 'fts_instrument_sync_request
SIGNAL drop_index_start WAIT_FOR sync_op';
......@@ -45,7 +46,7 @@ set DEBUG_SYNC= 'now SIGNAL fts_drop_index';
connection con1;
reap;
SET global DEBUG_DBUG=RESET;
set @@global.debug_dbug = @saved_dbug;
drop table t1, t2;
connection default;
set DEBUG_SYNC=RESET;
mysql-test/suite/optimizer_unfixed_bugs/r/bug36981.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
create table `t1` (`c1` char(1) default null,`c2` char(10) default null,
key (`c1`))
......@@ -7,3 +8,4 @@ select * from `t1` where `c1`='3' for update;
c1 c2
3 NULL
drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug40992.result
View file @ 451573fa
#
# Bug#40992 - InnoDB: Crash when engine_condition_pushdown is on
#
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t (
dummy INT PRIMARY KEY,
......@@ -13,3 +14,4 @@ dummy a b
3 3 3
5 5 5
DROP TABLE t;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug41996.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
drop table if exists `t1`;
Warnings:
......@@ -6,3 +7,4 @@ create table `t1` (`c` bigint, key(`c`),`a` int)engine=innodb;
insert into `t1` values(2,2);
delete `t1` from `t1` `a`, `t1` where `a`.`a`=`t1`.`c` ;
drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug42991.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;
/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;
......@@ -252,3 +253,4 @@ Warning 1292 Truncated incorrect DOUBLE value: 'd'
Warning 1292 Truncated incorrect DOUBLE value: 'd'
Warning 1292 Truncated incorrect DOUBLE value: 'd'
drop table `table5`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug43249.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1(c1 TIME NOT NULL, c2 TIME NULL, c3 DATE, PRIMARY
KEY(c1), UNIQUE INDEX(c2)) engine=innodb;
......@@ -9,3 +10,4 @@ SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2;
c1 c2 c3
08:29:45 NULL 2009-02-01
drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug43360.result
View file @ 451573fa
#
# Bug#43360 - Server crash with a simple multi-table update
#
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1 (
a CHAR(2) NOT NULL PRIMARY KEY,
......@@ -42,3 +43,4 @@ AB Sweden
MS United States of Ame
JA USA
DROP TABLE t1,t2;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug43448.result
View file @ 451573fa
#
# Bug#43448 - Server crashes on multi table delete with Innodb
#
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1 (
id1 INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
......@@ -28,3 +29,4 @@ DELETE t1, t2, t3
FROM t1, t2, t3
WHERE t1.id1 = t2.id2 AND t2.id2 = t3.id3 AND t1.id1 > 5;
DROP TABLE t1, t2, t3;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug43617.result
View file @ 451573fa
set storage_engine=innodb;
set @save_time_zone= @@time_zone;
set time_zone='+03:00';
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1(c1 TIMESTAMP NOT NULL, c2 TIMESTAMP NULL, c3 DATE, c4 DATETIME, PRIMARY KEY(c1), UNIQUE INDEX(c2));
INSERT INTO t1 VALUES('98-12-31 11:30:45','98.12.31 11+30+45','98-12-31 11:30:45','98.12.31 11+30+45'),('98/12/30 11*30*45','98@12@30 11^30^45','98/12/30 11*30*45','98@12@30 11^30^45'),('98-12-29','98.12.29','98-12-29','98.12.29'),('98/12/28','98@12@28','98/12/28','98@12@28');
......@@ -100,3 +101,4 @@ c1 c2 c3 c4
2038-01-09 03:14:07 2038-01-09 03:14:07 2009-01-05 2009-01-06 00:00:00
DROP TABLE t1;
set time_zone= @save_time_zone;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug36981.test
View file @ 451573fa
......@@ -4,6 +4,7 @@
--source include/have_innodb.inc
# crash requires this
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
create table `t1` (`c1` char(1) default null,`c2` char(10) default null,
......@@ -12,3 +13,4 @@ engine=innodb default charset=latin1;
insert into `t1` values ('3',null);
select * from `t1` where `c1`='3' for update;
drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug40992.test
View file @ 451573fa
......@@ -5,6 +5,7 @@
--source include/have_debug.inc
--source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
# Crash requires that we enable Index Condition Pushdown in InnoDB
set session debug_dbug="+d,optimizer_innodb_icp";
......@@ -19,3 +20,4 @@ INSERT INTO t VALUES (1,1,1),(3,3,3),(5,5,5);
SELECT * FROM t WHERE a > 2 FOR UPDATE;
DROP TABLE t;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug41996.test
View file @ 451573fa
......@@ -5,6 +5,7 @@
--source include/have_innodb.inc
# crash requires this
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
drop table if exists `t1`;
......@@ -12,3 +13,4 @@ create table `t1` (`c` bigint, key(`c`),`a` int)engine=innodb;
insert into `t1` values(2,2);
delete `t1` from `t1` `a`, `t1` where `a`.`a`=`t1`.`c` ;
drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug42991.test
View file @ 451573fa
......@@ -6,6 +6,7 @@
--source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
# Valgrind errors happen only with this:
set session debug_dbug="+d,optimizer_innodb_icp";
......@@ -246,3 +247,4 @@ UNLOCK TABLES;
select * from `table5` where (col2 <= '6566-06-15' AND col24 <> 'd') group by `col83` order by `col83` desc ;
drop table `table5`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug43249.test
View file @ 451573fa
......@@ -4,6 +4,7 @@
--source include/have_debug.inc
--source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1(c1 TIME NOT NULL, c2 TIME NULL, c3 DATE, PRIMARY
......@@ -15,3 +16,4 @@ SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2;
SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2;
drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug43360.test
View file @ 451573fa
......@@ -6,6 +6,7 @@
--source include/have_debug.inc
--source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
# crash requires this
set session debug_dbug="+d,optimizer_innodb_icp";
......@@ -42,3 +43,4 @@ SELECT * FROM t1;
SELECT * FROM t2;
DROP TABLE t1,t2;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug43448.test
View file @ 451573fa
......@@ -5,6 +5,7 @@
--source include/have_debug.inc
--source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
# crash requires ICP support in InnoDB
set session debug_dbug="+d,optimizer_innodb_icp";
......@@ -58,3 +59,4 @@ FROM t1, t2, t3
WHERE t1.id1 = t2.id2 AND t2.id2 = t3.id3 AND t1.id1 > 5;
DROP TABLE t1, t2, t3;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug43617.test
View file @ 451573fa
......@@ -6,6 +6,7 @@
set storage_engine=innodb;
set @save_time_zone= @@time_zone;
set time_zone='+03:00';
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp";
######## Running INSERT tests for TIMESTAMP ########
......@@ -83,4 +84,4 @@ SELECT * FROM t1 WHERE c2 IN ('1971-01-01 00:00:01','2038-01-09 03:14:07') ORDER
DROP TABLE t1;
set time_zone= @save_time_zone;
set debug_dbug= @saved_dbug;
mysql-test/suite/parts/r/partition_debug.result
View file @ 451573fa
......@@ -6,11 +6,11 @@ CREATE TABLE t1 (a INT, b VARCHAR(64), KEY(b,a))
PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (1, "1"), (2, "2"), (3, "3"), (4, "Four"), (5, "Five"),
(6, "Six"), (7, "Seven"), (8, "Eight"), (9, "Nine");
SET @save_dbug=@@debug_dbug;
SET @saved_dbug=@@debug_dbug;
SET SESSION debug_dbug="+d,ha_partition_fail_index_init";
SELECT * FROM t1 WHERE b = "Seven";
ERROR HY000: Table has no partition for value 0
SET SESSION debug_dbug=@save_dbug;
SET SESSION debug_dbug=@saved_dbug;
SELECT * FROM t1 WHERE b = "Seven";
a b
7 Seven
......
mysql-test/suite/parts/t/partition_debug.test
View file @ 451573fa
......@@ -18,11 +18,11 @@ CREATE TABLE t1 (a INT, b VARCHAR(64), KEY(b,a))
PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (1, "1"), (2, "2"), (3, "3"), (4, "Four"), (5, "Five"),
(6, "Six"), (7, "Seven"), (8, "Eight"), (9, "Nine");
SET @save_dbug=@@debug_dbug;
SET @saved_dbug=@@debug_dbug;
SET SESSION debug_dbug="+d,ha_partition_fail_index_init";
--error ER_NO_PARTITION_FOR_GIVEN_VALUE
SELECT * FROM t1 WHERE b = "Seven";
SET SESSION debug_dbug=@save_dbug;
SET SESSION debug_dbug=@saved_dbug;
SELECT * FROM t1 WHERE b = "Seven";
DROP TABLE t1;
......
mysql-test/suite/parts/t/partition_debug_innodb.test
View file @ 451573fa
......@@ -30,7 +30,7 @@ INSERT INTO t1 VALUES (6, 'X 6 row'), (7, 'Seventh row'), (8, 'Last row');
ALTER TABLE t1 ADD INDEX new_b_index (b);
ALTER TABLE t1 DROP INDEX new_b_index;
SET @save_dbug=@@debug_dbug;
SET @saved_dbug=@@debug_dbug;
SET SESSION debug_dbug = "+d,ha_partition_fail_final_add_index";
--error ER_NO_PARTITION_FOR_GIVEN_VALUE
......@@ -46,7 +46,7 @@ SHOW CREATE TABLE t1;
--sorted_result
SELECT * FROM t1;
SET SESSION debug_dbug = @save_dbug;
SET SESSION debug_dbug = @saved_dbug;
SHOW CREATE TABLE t1;
DROP TABLE t1;
}
......
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_again_allow.result
View file @ 451573fa
......@@ -22,6 +22,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_again_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_bad_allow.result
View file @ 451573fa
......@@ -22,6 +22,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_bad_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_good_allow.result
View file @ 451573fa
......@@ -22,6 +22,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN null
LAST_ERROR_SEEN null
revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_good_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
ERROR HY000: Host 'santa.claus.ipv4.example.com' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_noname_allow.result
View file @ 451573fa
......@@ -24,6 +24,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -103,4 +104,4 @@ revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'192.0.2.4';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_noname_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_auth_plugin.result
View file @ 451573fa
......@@ -24,6 +24,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
uninstall plugin test_plugin_server;
ERROR HY000: Plugin 'test_plugin_server' is not loaded
......@@ -194,5 +195,5 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv4.example.com'
FROM 'plug'@'santa.claus.ipv4.example.com';
DROP USER 'plug'@'santa.claus.ipv4.example.com';
DROP USER 'plug_dest'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
delete from mysql.plugin where name='test_plugin_server';
mysql-test/suite/perfschema/r/hostcache_ipv4_blocked.result
View file @ 451573fa
......@@ -25,6 +25,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4,native_password_bad_reply";
ERROR 08S01: Bad handshake
connection default;
......@@ -427,4 +428,4 @@ drop user 'root'@'santa.claus.ipv4.example.com';
revoke select on test.* from 'quota'@'santa.claus.ipv4.example.com';
drop user 'quota'@'santa.claus.ipv4.example.com';
set global max_connect_errors = @saved_max_connect_errors;
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_format.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_format_ipv4";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_max_con.result
View file @ 451573fa
......@@ -25,6 +25,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
connect con2a,"127.0.0.1",quota,,test,$MASTER_MYPORT,;
select "Con2a is alive";
......@@ -702,4 +703,4 @@ disconnect tmp_con7;
set global max_connections = @saved_max_connections;
set global max_user_connections = @saved_max_user_connections;
drop user 'quota'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_nameinfo_again_allow.result
View file @ 451573fa
......@@ -24,6 +24,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -178,4 +179,4 @@ revoke select on test.* from 'root'@'192.0.2.4';
revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'192.0.2.4';
drop user 'root'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_nameinfo_again_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default;
......@@ -142,4 +143,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_nameinfo_noname_allow.result
View file @ 451573fa
......@@ -22,6 +22,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_nameinfo_noname_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_passwd.result
View file @ 451573fa
......@@ -24,6 +24,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
ERROR 28000: Access denied for user 'user_without'@'santa.claus.ipv4.example.com' (using password: YES)
connection default;
......@@ -207,4 +208,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
drop user 'user_with'@'santa.claus.ipv4.example.com';
drop user 'user_without'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_ssl.result
View file @ 451573fa
......@@ -28,6 +28,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
ERROR 28000: Access denied for user 'user_ssl'@'santa.claus.ipv4.example.com' (using password: NO)
connection default;
......@@ -151,4 +152,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
drop user 'user_ssl'@'santa.claus.ipv4.example.com';
drop user 'user_ssl_x509'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_again_allow.result
View file @ 451573fa
......@@ -22,6 +22,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again";
connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_again_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_bad_allow.result
View file @ 451573fa
......@@ -22,6 +22,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6";
connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_bad_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_good_allow.result
View file @ 451573fa
......@@ -22,6 +22,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN null
LAST_ERROR_SEEN null
revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_good_deny.result
View file @ 451573fa
......@@ -19,6 +19,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
ERROR HY000: Host 'santa.claus.ipv6.example.com' is not allowed to connect to this MariaDB server
connection default;
......@@ -80,4 +81,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_noname_allow.result
View file @ 451573fa
......@@ -24,6 +24,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname";
connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -103,4 +104,4 @@ revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_noname_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_auth_plugin.result
View file @ 451573fa
......@@ -24,6 +24,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
uninstall plugin test_plugin_server;
ERROR HY000: Plugin 'test_plugin_server' is not loaded
......@@ -194,5 +195,5 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv6.example.com'
FROM 'plug'@'santa.claus.ipv6.example.com';
DROP USER 'plug'@'santa.claus.ipv6.example.com';
DROP USER 'plug_dest'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
delete from mysql.plugin where name='test_plugin_server';
mysql-test/suite/perfschema/r/hostcache_ipv6_blocked.result
View file @ 451573fa
......@@ -25,6 +25,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6,native_password_bad_reply";
ERROR 08S01: Bad handshake
connection default;
......@@ -427,4 +428,4 @@ drop user 'root'@'santa.claus.ipv6.example.com';
revoke select on test.* from 'quota'@'santa.claus.ipv6.example.com';
drop user 'quota'@'santa.claus.ipv6.example.com';
set global max_connect_errors = @saved_max_connect_errors;
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_max_con.result
View file @ 451573fa
......@@ -25,6 +25,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
connect con2a,"::1",quota,,test,$MASTER_MYPORT,;
select "Con2a is alive";
......@@ -702,4 +703,4 @@ disconnect tmp_con7;
set global max_connections = @saved_max_connections;
set global max_user_connections = @saved_max_user_connections;
drop user 'quota'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_nameinfo_again_allow.result
View file @ 451573fa
......@@ -24,6 +24,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again";
connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -178,4 +179,4 @@ revoke select on test.* from 'root'@'2001:db8::6:6';
revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'2001:db8::6:6';
drop user 'root'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_nameinfo_again_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default;
......@@ -142,4 +143,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_nameinfo_noname_allow.result
View file @ 451573fa
......@@ -22,6 +22,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname";
connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive";
......@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_nameinfo_noname_deny.result
View file @ 451573fa
......@@ -20,6 +20,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default;
......@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_passwd.result
View file @ 451573fa
......@@ -24,6 +24,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
ERROR 28000: Access denied for user 'user_without'@'santa.claus.ipv6.example.com' (using password: YES)
connection default;
......@@ -207,4 +208,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
drop user 'user_with'@'santa.claus.ipv6.example.com';
drop user 'user_without'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_ssl.result
View file @ 451573fa
......@@ -28,6 +28,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
ERROR 28000: Access denied for user 'user_ssl'@'santa.claus.ipv6.example.com' (using password: NO)
connection default;
......@@ -151,4 +152,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
drop user 'user_ssl'@'santa.claus.ipv6.example.com';
drop user 'user_ssl_x509'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_peer_addr.result
View file @ 451573fa
......@@ -27,6 +27,7 @@ current_user()
root@localhost
disconnect con1;
connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_error";
ERROR HY000: Can't get hostname for your address
connection default;
......@@ -50,7 +51,7 @@ Connection_errors_peer_address 2
Connection_errors_select 0
Connection_errors_tcpwrap 0
"Dumping performance_schema.host_cache"
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
flush status;
show global status like "connection_errors_%";
Variable_name Value
......
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_again_allow.test
View file @ 451573fa
......@@ -27,6 +27,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
......@@ -48,5 +49,5 @@ disconnect con3;
revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_again_deny.test
View file @ 451573fa
......@@ -25,6 +25,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again";
--disable_query_log
......@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_bad_allow.test
View file @ 451573fa
......@@ -30,6 +30,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
......@@ -51,5 +52,5 @@ disconnect con3;
revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_bad_deny.test
View file @ 451573fa
......@@ -27,6 +27,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4";
--disable_query_log
......@@ -45,5 +46,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_good_allow.test
View file @ 451573fa
......@@ -28,6 +28,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
......@@ -49,5 +50,5 @@ disconnect con3;
revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_good_deny.test
View file @ 451573fa
......@@ -25,6 +25,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
--disable_query_log
......@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_noname_allow.test
View file @ 451573fa
......@@ -30,6 +30,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
......@@ -53,5 +54,5 @@ revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'192.0.2.4';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_noname_deny.test
View file @ 451573fa
......@@ -25,6 +25,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname";
--disable_query_log
......@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_auth_plugin.test
View file @ 451573fa
......@@ -30,6 +30,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
uninstall plugin test_plugin_server;
......@@ -86,6 +87,6 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv4.example.com'
DROP USER 'plug'@'santa.claus.ipv4.example.com';
DROP USER 'plug_dest'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
delete from mysql.plugin where name='test_plugin_server';
mysql-test/suite/perfschema/t/hostcache_ipv4_blocked.test
View file @ 451573fa
......@@ -33,6 +33,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4,native_password_bad_reply";
--disable_query_log
......@@ -156,5 +157,5 @@ revoke select on test.* from 'quota'@'santa.claus.ipv4.example.com';
drop user 'quota'@'santa.claus.ipv4.example.com';
set global max_connect_errors = @saved_max_connect_errors;
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_format.test
View file @ 451573fa
......@@ -24,6 +24,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_format_ipv4";
--disable_query_log
......@@ -42,5 +43,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_max_con.test
View file @ 451573fa
......@@ -31,6 +31,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
connect (con2a,"127.0.0.1",quota,,test,$MASTER_MYPORT,);
......@@ -259,5 +260,5 @@ set global max_user_connections = @saved_max_user_connections;
# revoke all privileges on test.* from 'quota'@'santa.claus.ipv4.example.com';
drop user 'quota'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_nameinfo_again_allow.test
View file @ 451573fa
......@@ -30,6 +30,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
......@@ -71,5 +72,5 @@ revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'192.0.2.4';
drop user 'root'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_nameinfo_again_deny.test
View file @ 451573fa
......@@ -25,6 +25,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again";
--disable_query_log
......@@ -61,5 +62,5 @@ connect (con5,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_nameinfo_noname_allow.test
View file @ 451573fa
......@@ -28,6 +28,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
......@@ -49,5 +50,5 @@ disconnect con3;
revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_nameinfo_noname_deny.test
View file @ 451573fa
......@@ -25,6 +25,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname";
--disable_query_log
......@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_passwd.test
View file @ 451573fa
......@@ -29,6 +29,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
--disable_query_log
......@@ -82,5 +83,5 @@ connect (con2f,"127.0.0.1",user_with,wrong_password,test,$MASTER_MYPORT,);
drop user 'user_with'@'santa.claus.ipv4.example.com';
drop user 'user_without'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_ssl.test
View file @ 451573fa
......@@ -30,6 +30,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
--disable_query_log
......@@ -67,5 +68,5 @@ connect (con2d,"127.0.0.1",user_ssl_x509,good_password,test,$MASTER_MYPORT,,SSL)
drop user 'user_ssl'@'santa.claus.ipv4.example.com';
drop user 'user_ssl_x509'@'santa.claus.ipv4.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_again_allow.test
View file @ 451573fa
......@@ -29,6 +29,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again";
connect (con2,"::1",root,,test,$MASTER_MYPORT,);
......@@ -50,5 +51,5 @@ disconnect con3;
revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_again_deny.test
View file @ 451573fa
......@@ -26,6 +26,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again";
--disable_query_log
......@@ -44,5 +45,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_bad_allow.test
View file @ 451573fa
......@@ -31,6 +31,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6";
connect (con2,"::1",root,,test,$MASTER_MYPORT,);
......@@ -52,5 +53,5 @@ disconnect con3;
revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_bad_deny.test
View file @ 451573fa
......@@ -28,6 +28,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6";
--disable_query_log
......@@ -46,5 +47,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_good_allow.test
View file @ 451573fa
......@@ -29,6 +29,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
connect (con2,"::1",root,,test,$MASTER_MYPORT,);
......@@ -50,5 +51,5 @@ disconnect con3;
revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_good_deny.test
View file @ 451573fa
......@@ -22,6 +22,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
--disable_query_log
......@@ -40,5 +41,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_noname_allow.test
View file @ 451573fa
......@@ -31,6 +31,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname";
connect (con2,"::1",root,,test,$MASTER_MYPORT,);
......@@ -54,5 +55,4 @@ revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_noname_deny.test
View file @ 451573fa
......@@ -26,6 +26,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname";
--disable_query_log
......@@ -44,5 +45,4 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_auth_plugin.test
View file @ 451573fa
......@@ -31,6 +31,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
uninstall plugin test_plugin_server;
......@@ -87,6 +88,6 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv6.example.com'
DROP USER 'plug'@'santa.claus.ipv6.example.com';
DROP USER 'plug_dest'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
delete from mysql.plugin where name='test_plugin_server';
mysql-test/suite/perfschema/t/hostcache_ipv6_blocked.test
View file @ 451573fa
......@@ -33,6 +33,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6,native_password_bad_reply";
--disable_query_log
......@@ -156,5 +157,5 @@ revoke select on test.* from 'quota'@'santa.claus.ipv6.example.com';
drop user 'quota'@'santa.claus.ipv6.example.com';
set global max_connect_errors = @saved_max_connect_errors;
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_max_con.test
View file @ 451573fa
......@@ -32,6 +32,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
connect (con2a,"::1",quota,,test,$MASTER_MYPORT,);
......@@ -241,5 +242,5 @@ set global max_user_connections = @saved_max_user_connections;
# revoke all privileges on test.* from 'quota'@'santa.claus.ipv6.example.com';
drop user 'quota'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_nameinfo_again_allow.test
View file @ 451573fa
......@@ -31,6 +31,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again";
connect (con2,"::1",root,,test,$MASTER_MYPORT,);
......@@ -72,5 +73,5 @@ revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'2001:db8::6:6';
drop user 'root'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_nameinfo_again_deny.test
View file @ 451573fa
......@@ -26,6 +26,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again";
--disable_query_log
......@@ -62,5 +63,5 @@ connect (con5,"::1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_nameinfo_noname_allow.test
View file @ 451573fa
......@@ -29,6 +29,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname";
connect (con2,"::1",root,,test,$MASTER_MYPORT,);
......@@ -50,5 +51,5 @@ disconnect con3;
revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_nameinfo_noname_deny.test
View file @ 451573fa
......@@ -26,6 +26,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname";
--disable_query_log
......@@ -44,5 +45,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_passwd.test
View file @ 451573fa
......@@ -27,6 +27,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
--disable_query_log
......@@ -80,5 +81,5 @@ connect (con2f,"::1",user_with,wrong_password,test,$MASTER_MYPORT,);
drop user 'user_with'@'santa.claus.ipv6.example.com';
drop user 'user_without'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_ssl.test
View file @ 451573fa
......@@ -31,6 +31,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
--disable_query_log
......@@ -68,5 +69,5 @@ connect (con2d,"::1",user_ssl_x509,good_password,test,$MASTER_MYPORT,,SSL);
drop user 'user_ssl'@'santa.claus.ipv6.example.com';
drop user 'user_ssl_x509'@'santa.claus.ipv6.example.com';
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_peer_addr.test
View file @ 451573fa
......@@ -22,6 +22,7 @@ select current_user();
disconnect con1;
--connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_error";
--disable_query_log
......@@ -42,7 +43,7 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
show global status like "connection_errors_%";
--source ../include/hostcache_dump.inc
set global debug_dbug= default;
set @@global.debug_dbug = @saved_dbug;
flush status;
show global status like "connection_errors_%";
......
mysql-test/suite/rpl/r/kill_race_condition.result
View file @ 451573fa
......@@ -4,6 +4,7 @@ connection master;
create table t1 (a int);
connection slave;
connection slave;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug='d,rows_log_event_before_open_table';
connection master;
insert t1 values (1),(2),(3);
......@@ -13,7 +14,7 @@ kill slave_sql_thread;
set debug_sync='now SIGNAL go_ahead_sql';
include/wait_for_slave_sql_error.inc [errno=1927]
Last_SQL_Error = Error executing row event: 'Connection was killed'
set global debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set debug_sync='RESET';
connection master;
drop table t1;
......
mysql-test/suite/rpl/r/rpl_bug33931.result
View file @ 451573fa
......@@ -5,10 +5,11 @@ call mtr.add_suppression("Failed during slave I/O thread initialization");
call mtr.add_suppression("Slave SQL.*Failed during slave thread initialization.* 1593");
include/stop_slave.inc
reset slave;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
start slave;
include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Failed during slave thread initialization'
SET GLOBAL debug_dbug="";
set @@global.debug_dbug = @saved_dbug;
RESET SLAVE;
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_bug41902.result
View file @ 451573fa
......@@ -2,6 +2,7 @@ include/master-slave.inc
[connection master]
connection slave;
stop slave;
set @saved_dbug = @@global.debug_dbug;
SET @@debug_dbug="d,simulate_find_log_pos_error";
reset slave;
ERROR HY000: Target log not found in binlog index
......@@ -19,6 +20,7 @@ SET @@debug_dbug="";
reset slave;
change master to master_host='dummy';
connection master;
set @saved_dbug_m = @@global.debug_dbug;
SET @@debug_dbug="d,simulate_find_log_pos_error";
reset master;
ERROR HY000: Target log not found in binlog index
......@@ -29,6 +31,7 @@ purge binary logs to 'master-bin.000001';
ERROR HY000: Target log not found in binlog index
SET @@debug_dbug="";
purge binary logs to 'master-bin.000001';
set @@global.debug_dbug = @saved_dbug;
==== clean up ====
CHANGE MASTER TO MASTER_HOST = '127.0.0.1';
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_checksum.result
View file @ 451573fa
......@@ -76,6 +76,7 @@ connection master;
set @@global.binlog_checksum = CRC32;
insert into t1 values (1) /* will not be applied on slave due to simulation */;
connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_slave_unaware_checksum';
start slave;
include/wait_for_slave_io_error.inc [errno=1236]
......@@ -83,15 +84,16 @@ Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary
select count(*) as zero from t1;
zero
0
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
connection slave;
include/start_slave.inc
connection master;
set @@global.master_verify_checksum = 1;
set @save_dbug = @@session.debug_dbug;
set @@session.debug_dbug='d,simulate_checksum_test_failure';
show binlog events;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
set @@session.debug_dbug='';
set debug_dbug= @save_dbug;
set @@global.master_verify_checksum = default;
connection slave;
connection slave;
......@@ -99,10 +101,11 @@ include/stop_slave.inc
connection master;
create table t2 (a int);
connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave io_thread;
include/wait_for_slave_io_error.inc [errno=1595,1913]
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
start slave io_thread;
include/wait_for_slave_param.inc [Read_Master_Log_Pos]
set @@global.slave_sql_verify_checksum = 1;
......@@ -110,7 +113,7 @@ set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave sql_thread;
include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Error initializing relay log position: I/O error reading event at position 4'
set @@global.debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
include/start_slave.inc
connection master;
connection slave;
......
mysql-test/suite/rpl/r/rpl_corruption.result
View file @ 451573fa
......@@ -13,6 +13,7 @@ connection master;
CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY, b VARCHAR(10), c VARCHAR(100));
include/stop_slave.inc
# 2. Corruption in master binlog and SHOW BINLOG EVENTS
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char";
SHOW BINLOG EVENTS;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
......@@ -55,9 +56,9 @@ connection slave;
include/diff_tables.inc [master:test.t1, slave:test.t1]
# 8. Clean up
connection master;
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
SET GLOBAL master_verify_checksum = @old_master_verify_checksum;
DROP TABLE t1;
connection slave;
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_heartbeat_debug.result
View file @ 451573fa
......@@ -7,7 +7,7 @@ set @@global.slave_net_timeout= 10;
show status like 'Slave_heartbeat_period';;
Variable_name Slave_heartbeat_period
Value 60.000
SET @save_dbug= @@GLOBAL.debug_dbug;
SET @saved_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,simulate_slave_heartbeat_network_error";
CALL mtr.add_suppression('SET @master_heartbeat_period to master failed with error');
CALL mtr.add_suppression('Master command COM_REGISTER_SLAVE failed: failed registering on master, reconnecting to try again');
......@@ -25,7 +25,7 @@ connection master;
drop table t1;
connection slave;
include/stop_slave.inc
SET GLOBAL debug_dbug=@save_dbug;
SET GLOBAL debug_dbug=@saved_dbug;
set @@global.slave_net_timeout= @restore_slave_net_timeout;
include/start_slave.inc
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_incident.result
View file @ 451573fa
......@@ -14,6 +14,7 @@ a
1
2
3
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*';
REPLACE INTO t1 VALUES (4);
SELECT * FROM t1;
......@@ -22,6 +23,7 @@ a
2
3
4
set @@global.debug_dbug = @saved_dbug;
connection slave;
call mtr.add_suppression("Slave SQL.*The incident LOST_EVENTS occurred on the master.* 1590");
include/wait_for_slave_sql_error.inc [errno=1590]
......
mysql-test/suite/rpl/r/rpl_init_slave_errors.result
View file @ 451573fa
......@@ -4,12 +4,13 @@ connection slave;
stop slave;
reset slave;
connection slave;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
start slave;
include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Failed during slave thread initialization'
call mtr.add_suppression("Failed during slave.* thread initialization");
SET GLOBAL debug_dbug= "";
set @@global.debug_dbug = @saved_dbug;
connection slave;
reset slave;
SET GLOBAL init_slave= "garbage";
......
mysql-test/suite/rpl/r/rpl_row_big_table_id.result
View file @ 451573fa
......@@ -2,6 +2,7 @@ include/master-slave.inc
[connection master]
connection master;
include/rpl_restart_server.inc [server_number=1]
set @saved_dbug = @@session.debug_dbug;
SET @@debug_dbug="d,simulate_big_table_id";
CREATE TABLE t (a int);
INSERT INTO t SET a= 0;
......@@ -42,5 +43,6 @@ master-bin.000002 # Query 1 # COMMIT
connection slave;
connection master;
DROP TABLE t;
set debug_dbug= @saved_dbug;
connection slave;
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_row_find_row_debug.result
View file @ 451573fa
......@@ -2,6 +2,7 @@ include/master-slave.inc
[connection master]
connection slave;
include/stop_slave.inc
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL log_warnings = 2;
SET GLOBAL debug_dbug="d,inject_long_find_row_note";
include/start_slave.inc
......@@ -17,7 +18,7 @@ connection slave;
# Check if any note related to long DELETE_ROWS and UPDATE_ROWS appears in the error log
Occurrences: update=1, delete=1
include/stop_slave.inc
SET GLOBAL debug_dbug = '';
set @@global.debug_dbug = @saved_dbug;
SET GLOBAL log_warnings = 2;
include/start_slave.inc
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_semi_sync_skip_repl.result
View file @ 451573fa
......@@ -11,6 +11,7 @@ SET @@GLOBAL.rpl_semi_sync_slave_enabled = 1;
include/start_slave.inc
connection master;
CREATE TABLE t1 (a INT) ENGINE=innodb;
set @saved_dbug = @@global.debug_dbug;
SET @@GLOBAL.debug_dbug="d,dbug_master_binlog_over_2GB";
SET @@SESSION.skip_replication=1;
INSERT INTO t1 SET a=1;
......@@ -20,7 +21,7 @@ SET @@GLOBAL.debug_dbug="";
FLUSH LOGS;
connection slave;
connection master;
SET @@GLOBAL.debug_dbug=@@GLOBAL.debug_dbug;
set @@global.debug_dbug = @saved_dbug;
SET @@GLOBAL.rpl_semi_sync_master_timeout = 10000;
SET @@GLOBAL.rpl_semi_sync_master_enabled = 0;
connection master;
......
mysql-test/suite/rpl/r/rpl_show_slave_running.result
View file @ 451573fa
......@@ -3,6 +3,7 @@ include/master-slave.inc
connection slave;
SET DEBUG_SYNC= 'RESET';
include/stop_slave.inc
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= 'd,dbug.before_get_running_status_yes';
Slave_running, Slave_IO_Running, Slave_SQL_Running, must be OFF, NO, NO in three following queries
SHOW STATUS LIKE 'Slave_running';
......@@ -34,7 +35,7 @@ Slave_running ON
Slave_IO_Running= Yes
Slave_SQL_Running= Yes
connection slave;
set global debug_dbug= '';
set @@global.debug_dbug = @saved_dbug;
SET DEBUG_SYNC= 'RESET';
End of tests
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_slave_load_remove_tmpfile.result
View file @ 451573fa
include/master-slave.inc
[connection master]
connection slave;
set @saved_dbug = @@global.debug_dbug;
SET @@global.debug_dbug= '+d,remove_slave_load_file_before_write';
connection master;
create table t1(a int not null auto_increment, b int, primary key(a)) engine=innodb;
......@@ -21,5 +22,5 @@ call mtr.add_suppression("Slave: Can't get stat of .*");
call mtr.add_suppression("Slave SQL: Error .Can.t get stat of.* error.* 13");
call mtr.add_suppression("Slave: File.* not found.*");
call mtr.add_suppression("Slave SQL: Error .File.* not found.* error.* 29");
SET @@global.debug_dbug= '';
set @@global.debug_dbug = @saved_dbug;
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_stop_slave.result
View file @ 451573fa
......@@ -15,6 +15,7 @@ include/stop_slave.inc
# Suspend the INSERT statement in current transaction on SQL thread.
# It guarantees that SQL thread is applying the transaction when
# STOP SLAVE command launchs.
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,after_mysql_insert,*';
include/start_slave.inc
......@@ -74,6 +75,7 @@ connection master;
connection slave;
# Test end
set @@global.debug_dbug = @saved_dbug;
include/restart_slave.inc
connection slave;
call mtr.add_suppression("Slave SQL.*Request to stop slave SQL Thread received while applying a group that has non-transactional changes; waiting for completion of the group");
......@@ -98,6 +100,7 @@ connection slave;
include/stop_slave.inc
connection master;
include/stop_dump_threads.inc
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,dump_thread_wait_before_send_xid,*';
connection slave;
include/start_slave.inc
......@@ -120,6 +123,7 @@ connection slave;
include/wait_for_slave_to_stop.inc
connection slave1;
connection master;
set @@global.debug_dbug = @saved_dbug;
include/stop_dump_threads.inc
connection slave1;
include/start_slave.inc
......
mysql-test/suite/rpl/r/rpl_view_debug.result
View file @ 451573fa
......@@ -21,6 +21,7 @@ Tables_in_test
t1
v1
connection master;
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug="d,simulate_register_view_failure";
CREATE VIEW v2 as SELECT * FROM t1;
ERROR HY000: Out of memory; check if mysqld or some other process uses all available memory; if not, you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space
......@@ -36,4 +37,5 @@ v1
connection master;
DROP VIEW IF EXISTS v1;
DROP TABLE t1;
set debug_dbug= @saved_dbug;
include/rpl_end.inc
mysql-test/suite/rpl/t/kill_race_condition.test
View file @ 451573fa
......@@ -7,6 +7,7 @@ create table t1 (a int);
--sync_slave_with_master
connection slave;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug='d,rows_log_event_before_open_table';
connection master;
......@@ -22,7 +23,7 @@ set debug_sync='now SIGNAL go_ahead_sql';
--source include/wait_for_slave_sql_error.inc
let $error= query_get_value(SHOW SLAVE STATUS, Last_SQL_Error, 1);
--echo Last_SQL_Error = $error
set global debug_dbug='';
set @@global.debug_dbug = @saved_dbug;
set debug_sync='RESET';
connection master;
drop table t1;
......
mysql-test/suite/rpl/t/rpl_bug33931.test
View file @ 451573fa
......@@ -15,6 +15,7 @@ call mtr.add_suppression("Slave SQL.*Failed during slave thread initialization.*
reset slave;
# Set debug flags on slave to force errors to occur
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
--disable_query_log
......@@ -39,7 +40,7 @@ start slave;
#
# Cleanup
#
SET GLOBAL debug_dbug="";
set @@global.debug_dbug = @saved_dbug;
# Clear Last_SQL_Error
RESET SLAVE;
......
mysql-test/suite/rpl/t/rpl_bug41902.test
View file @ 451573fa
......@@ -15,7 +15,7 @@ source include/master-slave.inc;
connection slave;
stop slave;
set @saved_dbug = @@global.debug_dbug;
SET @@debug_dbug="d,simulate_find_log_pos_error";
--error ER_UNKNOWN_TARGET_BINLOG
......@@ -36,6 +36,7 @@ reset slave;
change master to master_host='dummy';
connection master;
set @saved_dbug_m = @@global.debug_dbug;
SET @@debug_dbug="d,simulate_find_log_pos_error";
--error ER_UNKNOWN_TARGET_BINLOG
reset master;
......@@ -53,10 +54,12 @@ purge binary logs to 'master-bin.000001';
--disable_query_log
call mtr.add_suppression("Failed to locate old binlog or relay log files");
call mtr.add_suppression("MYSQL_BIN_LOG::purge_logs was called with file ..master-bin.000001 not listed in the index");
set @@global.debug_dbug = @saved_dbug_m;
connection slave;
call mtr.add_suppression("Failed to locate old binlog or relay log files");
call mtr.add_suppression("MYSQL_BIN_LOG::purge_logs was called with file ..master-bin.000001 not listed in the index");
--enable_query_log
set @@global.debug_dbug = @saved_dbug;
--echo ==== clean up ====
CHANGE MASTER TO MASTER_HOST = '127.0.0.1';
......
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
View file @ 451573fa
......@@ -26,7 +26,7 @@ call mtr.add_suppression("Fatal error: The slave I/O thread stops because master
call mtr.add_suppression("Slave I/O thread .* register on master");
#Test case 1: Try to get the value of the UNIX_TIMESTAMP from master under network disconnection
let $debug_saved= `select @@global.debug`;
set @saved_dbug = @@global.debug_dbug;
# set up two parameters to pass into extra/rpl_tests/rpl_get_master_version_and_clock
let $dbug_sync_point= 'debug_lock.before_get_UNIX_TIMESTAMP';
......@@ -40,11 +40,9 @@ let $dbug_sync_point= 'debug_lock.before_get_SERVER_ID';
let $debug_sync_action= 'now SIGNAL signal.get_server_id';
source extra/rpl_tests/rpl_get_master_version_and_clock.test;
eval set global debug_dbug= '$debug_saved';
# cleanup
set @@global.debug_dbug = @saved_dbug;
# is not really necessary but avoids mtr post-run env check warnings
SET DEBUG_SYNC= 'RESET';
......
mysql-test/suite/rpl/t/rpl_heartbeat_debug.test
View file @ 451573fa
......@@ -18,7 +18,7 @@ set @@global.slave_net_timeout= 10;
# default period slave_net_timeout/2
#
--query_vertical show status like 'Slave_heartbeat_period';
SET @save_dbug= @@GLOBAL.debug_dbug;
SET @saved_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,simulate_slave_heartbeat_network_error";
CALL mtr.add_suppression('SET @master_heartbeat_period to master failed with error');
CALL mtr.add_suppression('Master command COM_REGISTER_SLAVE failed: failed registering on master, reconnecting to try again');
......@@ -44,7 +44,7 @@ drop table t1;
connection slave;
--source include/stop_slave.inc
--disable_warnings
SET GLOBAL debug_dbug=@save_dbug;
SET GLOBAL debug_dbug=@saved_dbug;
set @@global.slave_net_timeout= @restore_slave_net_timeout;
--enable_warnings
--source include/start_slave.inc
......
mysql-test/suite/rpl/t/rpl_row_big_table_id.test
View file @ 451573fa
......@@ -17,6 +17,7 @@
--let $rpl_server_number= 1
--source include/rpl_restart_server.inc
set @saved_dbug = @@session.debug_dbug;
SET @@debug_dbug="d,simulate_big_table_id";
CREATE TABLE t (a int);
......@@ -51,7 +52,7 @@ if (`SELECT sum(a) != 6 FROM t`)
--connection master
DROP TABLE t;
set debug_dbug= @saved_dbug;
--sync_slave_with_master
--source include/rpl_end.inc
mysql-test/suite/rpl/t/rpl_row_find_row_debug.test
View file @ 451573fa
......@@ -9,7 +9,7 @@
# - setup log_warnings and debug
--connection slave
--source include/stop_slave.inc
--let $debug_save= `SELECT @@GLOBAL.debug_dbug`
set @saved_dbug = @@global.debug_dbug;
--let $log_warnings_save= `SELECT @@GLOBAL.log_warnings`
SET GLOBAL log_warnings = 2;
......@@ -55,7 +55,7 @@ EOF
# cleanup
--source include/stop_slave.inc
--eval SET GLOBAL debug_dbug = '$debug_save'
set @@global.debug_dbug = @saved_dbug;
--eval SET GLOBAL log_warnings = $log_warnings_save
--source include/start_slave.inc
......
mysql-test/suite/rpl/t/rpl_row_index_choice.test
View file @ 451573fa
......@@ -47,6 +47,7 @@ sync_slave_with_master;
connection slave;
ANALYZE TABLE t2;
--echo # Slave will crash if using the wrong or no index
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="+d,slave_crash_if_wrong_index,slave_crash_if_table_scan";
connection master;
......@@ -238,6 +239,5 @@ connection master;
DROP TABLE t1;
sync_slave_with_master;
connection slave;
SET GLOBAL debug_dbug="";
set @@global.debug_dbug = @saved_dbug;
--source include/rpl_end.inc
mysql-test/suite/rpl/t/rpl_semi_sync_skip_repl.test
View file @ 451573fa
......@@ -33,7 +33,7 @@ source include/start_slave.inc;
CREATE TABLE t1 (a INT) ENGINE=innodb;
# Make the following events as if they offset over 2GB from the beginning of binlog
--let $sav_debug_dbug=@@GLOBAL.debug_dbug
set @saved_dbug = @@global.debug_dbug;
SET @@GLOBAL.debug_dbug="d,dbug_master_binlog_over_2GB";
SET @@SESSION.skip_replication=1;
INSERT INTO t1 SET a=1;
......@@ -51,7 +51,7 @@ FLUSH LOGS;
# Clean up
#
--connection master
--eval SET @@GLOBAL.debug_dbug=$sav_debug_dbug
set @@global.debug_dbug = @saved_dbug;
--eval SET @@GLOBAL.rpl_semi_sync_master_timeout = $sav_timeout_master
--eval SET @@GLOBAL.rpl_semi_sync_master_enabled = $sav_enabled_master
......
mysql-test/suite/rpl/t/rpl_show_slave_running.test
View file @ 451573fa
......@@ -11,7 +11,7 @@ connection slave;
SET DEBUG_SYNC= 'RESET';
source include/stop_slave.inc;
let $debug_saved= `select @@global.debug`;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= 'd,dbug.before_get_running_status_yes'; # to block due-started IO
# Test 1. Slave is stopped
......@@ -77,7 +77,7 @@ echo Slave_SQL_Running= $status;
connection slave;
eval set global debug_dbug= '$debug_saved';
set @@global.debug_dbug = @saved_dbug;
SET DEBUG_SYNC= 'RESET';
--echo End of tests
--source include/rpl_end.inc
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test
View file @ 451573fa
......@@ -29,7 +29,7 @@
##########################################################################
connection slave;
--let $old_debug= `SELECT @@global.debug_dbug`
set @saved_dbug = @@global.debug_dbug;
SET @@global.debug_dbug= '+d,remove_slave_load_file_before_write';
connection master;
......@@ -74,7 +74,7 @@ call mtr.add_suppression("Slave: File.* not found.*");
call mtr.add_suppression("Slave SQL: Error .File.* not found.* error.* 29");
--let $rpl_only_running_threads= 1
eval SET @@global.debug_dbug= '$old_debug';
set @@global.debug_dbug = @saved_dbug;
--source include/rpl_end.inc
mysql-test/suite/rpl/t/rpl_stop_slave.test
View file @ 451573fa
......@@ -22,7 +22,7 @@ source include/stop_slave.inc;
--echo # Suspend the INSERT statement in current transaction on SQL thread.
--echo # It guarantees that SQL thread is applying the transaction when
--echo # STOP SLAVE command launchs.
let $debug_save= `SELECT @@GLOBAL.debug`;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,after_mysql_insert,*';
source include/start_slave.inc;
......@@ -44,9 +44,7 @@ source extra/rpl_tests/rpl_stop_slave.test;
--echo
--echo # Test end
--disable_query_log
eval SET GLOBAL debug_dbug= '$debug_save';
--enable_query_log
set @@global.debug_dbug = @saved_dbug;
source include/restart_slave_sql.inc;
connection slave;
......@@ -79,7 +77,7 @@ connection master;
# make sure that there are no zombie threads
--source include/stop_dump_threads.inc
let $debug_save= `SELECT @@GLOBAL.debug`;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,dump_thread_wait_before_send_xid,*';
connection slave;
......@@ -126,9 +124,7 @@ reap;
# sure that we disable the DBUG_EXECUTE_IF
# that would set the dump thread to wait
connection master;
--disable_query_log
eval SET GLOBAL debug_dbug= '$debug_save';
--enable_query_log
set @@global.debug_dbug = @saved_dbug;
# make sure that there are no zombie threads
--source include/stop_dump_threads.inc
......
mysql-test/suite/rpl/t/rpl_view_debug.test
View file @ 451573fa
......@@ -18,6 +18,7 @@ sync_slave_with_master;
# view already has to be on slave
show tables;
connection master;
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug="d,simulate_register_view_failure";
--error ER_OUT_OF_RESOURCES
......@@ -30,5 +31,5 @@ show tables;
connection master;
DROP VIEW IF EXISTS v1;
DROP TABLE t1;
set debug_dbug= @saved_dbug;
--source include/rpl_end.inc
mysql-test/t/cache_temporal_4265.test
View file @ 451573fa
......@@ -5,9 +5,9 @@
create table t1 (a date);
insert t1 values ('2000-01-02'), ('2001-02-03'), ('2002-03-04');
set debug_dbug='d,str_to_datetime_warn';
select * from t1 where a > date_add('2000-01-01', interval 5 day);
set debug_dbug='';
SET STATEMENT debug_dbug='d,str_to_datetime_warn' for
select * from t1 where a > date_add('2000-01-01', interval 5 day);
drop table t1;
#
......
mysql-test/t/drop_bad_db_type.test
View file @ 451573fa
......@@ -7,7 +7,7 @@ if (!$HA_ARCHIVE_SO) {
let $mysqld_datadir= `select @@datadir`;
SET @save_dbug = @@debug_dbug;
SET @saved_dbug = @@debug_dbug;
set debug_dbug='+d,unstable_db_type';
install soname 'ha_archive';
......@@ -28,4 +28,4 @@ drop table t1;
--list_files $mysqld_datadir/test
uninstall soname 'ha_archive';
set debug_dbug=@save_dbug;
set debug_dbug=@saved_dbug;
mysql-test/t/engine_error_in_alter-8453.test
View file @ 451573fa
......@@ -4,8 +4,9 @@
--source include/have_debug.inc
create table t1 (a int, b int);
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,external_lock_failure';
--error ER_GET_ERRMSG
alter table t1 add column c int;
set debug_dbug='';
set debug_dbug= @saved_dbug;
drop table t1;
mysql-test/t/error_simulation.test
View file @ 451573fa
......@@ -21,6 +21,7 @@ set tmp_table_size=1024;
# Set debug flag so an error is returned when
# tmp table in query is converted from heap to myisam
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,raise_error";
--error ER_DUP_KEY
......@@ -36,7 +37,7 @@ CREATE TABLE t1 (a INT(100) NOT NULL);
INSERT INTO t1 VALUES (1), (0), (2);
SET SESSION debug_dbug='+d,alter_table_only_index_change';
ALTER TABLE t1 ADD INDEX a(a);
SET SESSION debug_dbug=DEFAULT;
set debug_dbug= @saved_dbug;
SHOW CREATE TABLE t1;
SELECT * FROM t1;
DROP TABLE t1;
......@@ -51,7 +52,7 @@ SET SESSION debug_dbug="+d,bug42064_simulate_oom";
# May fail with either ER_OUT_OF_RESOURCES or EE_OUTOFMEMORY
--error ER_OUT_OF_RESOURCES, 5
INSERT INTO t1 VALUES("");
SET SESSION debug_dbug=DEFAULT;
set debug_dbug= @saved_dbug;
DROP TABLE t1;
......@@ -84,7 +85,7 @@ EXPLAIN
SELECT * FROM t1 LEFT JOIN t2 ON ( t2.a < 10 OR t2.b < 10 );
SELECT * FROM t1 LEFT JOIN t2 ON ( t2.a < 10 OR t2.b < 10 );
SET SESSION debug_dbug= DEFAULT;
set debug_dbug= @saved_dbug;
SET optimizer_switch=@save_optimizer_switch;
......@@ -101,7 +102,7 @@ INSERT INTO t2 VALUES (1),(2);
SET SESSION debug_dbug="+d,bug11747970_raise_error";
--error ER_QUERY_INTERRUPTED
INSERT IGNORE INTO t2 SELECT f1 FROM t1 a WHERE NOT EXISTS (SELECT 1 FROM t2 b WHERE a.f1 = b.f1);
SET SESSION debug_dbug = DEFAULT;
set debug_dbug= @saved_dbug;
DROP TABLE t1,t2;
......@@ -156,4 +157,4 @@ SET SESSION debug_dbug="+d,simulate_create_virtual_tmp_table_out_of_memory";
--error ER_OUT_OF_RESOURCES, 5
SELECT f1(1);
DROP FUNCTION f1;
SET SESSION debug_dbug=DEFAULT;
set debug_dbug= @saved_dbug;
mysql-test/t/func_regexp_pcre_debug.test
View file @ 451573fa
--source include/have_debug.inc
SET debug_dbug='+d,pcre_exec_error_123';
SET STATEMENT debug_dbug='+d,pcre_exec_error_123' for
SELECT 'a' RLIKE 'a';
SET debug_dbug='';
SELECT 'a' RLIKE 'a';
mysql-test/t/log_slow_debug.test
View file @ 451573fa
......@@ -9,7 +9,7 @@ SET @@GLOBAL.log_output='TABLE';
FLUSH SLOW LOGS;
SET @@GLOBAL.slow_query_log=ON;
SET @@GLOBAL.log_slow_admin_statements=ON;
SET @save_dbug = @@debug_dbug;
SET @saved_dbug = @@debug_dbug;
SET SESSION debug_dbug="+d,simulate_slow_query";
DELIMITER $$;
......@@ -119,7 +119,7 @@ CALL show_slow_log();
--echo # Clean up
--echo #
SET SESSION debug_dbug=@save_dbug;
SET SESSION debug_dbug=@saved_dbug;
TRUNCATE mysql.slow_log;
SET @@global.slow_query_log= @org_slow_query_log;
SET @@global.log_output= @org_log_output;
......
mysql-test/t/mdev6830.test
View file @ 451573fa
......@@ -2,7 +2,7 @@
# MDEV-6830 Server crashes in best_access_path after a sequence of SELECTs invollving a temptable view
#
--source include/have_debug.inc
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug= 'd,opt';
CREATE TABLE t1 (pk INT PRIMARY KEY) ENGINE=MyISAM;
......@@ -60,4 +60,4 @@ SELECT * FROM t1, v3, t4 WHERE v3.f1 = t4.f1 AND t4.f2 = 6 AND t1.pk = v3.f5;
drop table t1,t2,t3,t4;
drop view v2,v3;
set debug_dbug= @saved_dbug;
mysql-test/t/merge-big.test
View file @ 451573fa
......@@ -42,7 +42,7 @@ LOCK TABLE t1 WRITE;
#SELECT NOW();
connect (con1,localhost,root,,);
let $con1_id= `SELECT CONNECTION_ID()`;
SET @orig_debug=@@debug;
SET @orig_debug=@@global.debug_dbug;
SET GLOBAL debug_dbug="+d,sleep_open_and_lock_after_open";
send INSERT INTO t1 VALUES (1);
connection default;
......
mysql-test/t/merge_debug.test
View file @ 451573fa
......@@ -14,7 +14,7 @@ call mtr.add_suppression("Index for table .*crashed' is corrupt; try to repair i
drop table if exists crashed,t2,t3,t4;
--enable_warnings
SET @orig_debug=@@debug;
SET @orig_debug=@@global.debug_dbug;
#
# Check that MariaDB handles reopen that fails without crashing
......
mysql-test/t/range_innodb.test
View file @ 451573fa
......@@ -80,10 +80,11 @@ create table t1 (
insert into t1
select A.a+10*B.a, A.a+10*B.a, A.a+10*B.a+100*C.a
from t0 A, t0 B, t0 C, t0 D where D.a<5;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug="+d,ha_index_init_fail";
explain select * from t1 where a=10 and b=10;
--error ER_TABLE_DEF_CHANGED
select * from t1 where a=10 and b=10;
DROP TABLE t0,t1;
set @@global.debug_dbug="-d";
set @@global.debug_dbug = @saved_dbug;
set @@optimizer_switch= @optimizer_switch_save;
mysql-test/t/select_debug.test
View file @ 451573fa
......@@ -10,6 +10,7 @@ create table t2 (a int);
insert into t2 values (2), (3);
set session join_cache_level=3;
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug= 'd,opt';
explain select t1.b from t1,t2 where t1.b=t2.a;
......@@ -17,3 +18,4 @@ select t1.b from t1,t2 where t1.b=t2.a;
set session join_cache_level=default;
drop table t1,t2;
set debug_dbug= @saved_dbug;
mysql-test/t/show_explain_ps.test
View file @ 451573fa
......@@ -38,6 +38,7 @@ let $wait_condition= select State='show_explain_trap' from information_schema.pr
#
connection con1;
set @show_explain_probe_select_id=1;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='d,show_explain_probe_join_exec_start';
send select count(*) from t0 where a < 100000;
......@@ -47,7 +48,7 @@ evalp show explain for $thr2;
connection con1;
reap;
set debug_dbug='';
set debug_dbug= @saved_dbug;
evalp select event_name
from
......
mysql-test/t/slowlog_enospace-10508.test
View file @ 451573fa
......@@ -9,6 +9,7 @@ create table t1 (a int, b int) engine=memory;
insert t1 select seq, seq+1 from seq_1_to_1000;
set global general_log=0;
set global log_queries_not_using_indexes=1;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,simulate_file_write_error';
--disable_result_log
--let $run= 50
......@@ -18,7 +19,7 @@ while ($run)
dec $run;
}
--enable_result_log
set debug_dbug='';
set debug_dbug= @saved_dbug;
set global general_log=1;
set global log_queries_not_using_indexes=default;
drop table t1;
mysql-test/t/stat_tables-enospc.test
View file @ 451573fa
......@@ -16,9 +16,10 @@ while ($i) {
}
--enable_query_log
set use_stat_tables=PREFERABLY, optimizer_use_condition_selectivity=3;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,simulate_file_write_error';
set @@max_heap_table_size=128*1024;
--replace_regex /'.*'/'tmp-file'/
analyze table t1;
set debug_dbug='';
set debug_dbug= @saved_dbug;
drop table t1;
mysql-test/t/union_crash-714.test
View file @ 451573fa
......@@ -3,7 +3,9 @@
#
--source include/have_debug.inc
create table t1 (i tinyint);
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,bug11747970_raise_error';
--error ER_QUERY_INTERRUPTED
insert into t1 (i) select i from t1 union select i from t1;
drop table t1;
set debug_dbug= @saved_dbug;
\ No newline at end of file
mysql-test/t/warnings_debug.test
View file @ 451573fa
......@@ -9,6 +9,7 @@ create table t1 (a int primary key) engine=innodb;
# Test that warnings produced during autocommit (after calling
# set_ok_status()) are still reported to the client.
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug="+d,warn_during_ha_commit_trans";
INSERT INTO t1 VALUES (1);
# The warning will be shown automatically by mysqltest; there was a bug where
......@@ -17,3 +18,4 @@ INSERT INTO t1 VALUES (1);
SHOW WARNINGS;
drop table t1;
set debug_dbug= @saved_dbug;
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7