Skip to content

M
MariaDB
Commit 451573fa authored by Alice Sherepa's avatar Alice Sherepa
Browse files
Options

MDEV-21360 debug_dbug pre-test value restoration issues

parent 800d1f30
Hide whitespace changes
Inline Side-by-side
Showing with 446 additions and 234 deletions
mysql-test/extra/binlog_tests/binlog_ioerr.inc
View file @ 451573fa
...@@ -15,12 +15,13 @@ RESET MASTER; ...@@ -15,12 +15,13 @@ RESET MASTER;
CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb; CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb;
INSERT INTO t1 VALUES(0); INSERT INTO t1 VALUES(0);
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug='+d,fail_binlog_write_1'; SET SESSION debug_dbug='+d,fail_binlog_write_1';
--error ER_ERROR_ON_WRITE --error ER_ERROR_ON_WRITE
INSERT INTO t1 VALUES(1); INSERT INTO t1 VALUES(1);
--error ER_ERROR_ON_WRITE --error ER_ERROR_ON_WRITE
INSERT INTO t1 VALUES(2); INSERT INTO t1 VALUES(2);
SET SESSION debug_dbug=''; SET SESSION debug_dbug=@saved_dbug;
INSERT INTO t1 VALUES(3); INSERT INTO t1 VALUES(3);
SELECT * FROM t1; SELECT * FROM t1;
......
mysql-test/extra/rpl_tests/rpl_checksum.inc
View file @ 451573fa
...@@ -108,6 +108,7 @@ insert into t1 values (1) /* will not be applied on slave due to simulation */; ...@@ -108,6 +108,7 @@ insert into t1 values (1) /* will not be applied on slave due to simulation */;
# instruction to the dump thread # instruction to the dump thread
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_slave_unaware_checksum'; set @@global.debug_dbug='d,simulate_slave_unaware_checksum';
start slave; start slave;
--let $slave_io_errno= 1236 --let $slave_io_errno= 1236
...@@ -116,8 +117,7 @@ source include/wait_for_slave_io_error.inc; ...@@ -116,8 +117,7 @@ source include/wait_for_slave_io_error.inc;
select count(*) as zero from t1; select count(*) as zero from t1;
###connection master; set @@global.debug_dbug = @saved_dbug;
set @@global.debug_dbug='';
connection slave; connection slave;
source include/start_slave.inc; source include/start_slave.inc;
...@@ -129,10 +129,11 @@ source include/start_slave.inc; ...@@ -129,10 +129,11 @@ source include/start_slave.inc;
# C1. Failure by a client thread # C1. Failure by a client thread
connection master; connection master;
set @@global.master_verify_checksum = 1; set @@global.master_verify_checksum = 1;
set @save_dbug = @@session.debug_dbug;
set @@session.debug_dbug='d,simulate_checksum_test_failure'; set @@session.debug_dbug='d,simulate_checksum_test_failure';
--error ER_ERROR_WHEN_EXECUTING_COMMAND --error ER_ERROR_WHEN_EXECUTING_COMMAND
show binlog events; show binlog events;
set @@session.debug_dbug=''; set debug_dbug= @save_dbug;
set @@global.master_verify_checksum = default; set @@global.master_verify_checksum = default;
#connection master; #connection master;
...@@ -149,6 +150,7 @@ connection slave; ...@@ -149,6 +150,7 @@ connection slave;
# C2. Failure by IO thread # C2. Failure by IO thread
# instruction to io thread # instruction to io thread
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_checksum_test_failure'; set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave io_thread; start slave io_thread;
# When the checksum error is detected, the slave sets error code 1913 # When the checksum error is detected, the slave sets error code 1913
...@@ -158,7 +160,7 @@ start slave io_thread; ...@@ -158,7 +160,7 @@ start slave io_thread;
--let $slave_io_errno= 1595,1913 --let $slave_io_errno= 1595,1913
--let $show_slave_io_error= 0 --let $show_slave_io_error= 0
source include/wait_for_slave_io_error.inc; source include/wait_for_slave_io_error.inc;
set @@global.debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
# to make IO thread re-read it again w/o the failure # to make IO thread re-read it again w/o the failure
start slave io_thread; start slave io_thread;
...@@ -179,7 +181,7 @@ source include/wait_for_slave_sql_error.inc; ...@@ -179,7 +181,7 @@ source include/wait_for_slave_sql_error.inc;
# resuming SQL thread to parse out the event w/o the failure # resuming SQL thread to parse out the event w/o the failure
set @@global.debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
source include/start_slave.inc; source include/start_slave.inc;
connection master; connection master;
......
mysql-test/extra/rpl_tests/rpl_corruption.inc
View file @ 451573fa
...@@ -73,6 +73,7 @@ while ($i) { ...@@ -73,6 +73,7 @@ while ($i) {
# Emulate corruption in binlog file when SHOW BINLOG EVENTS is executing # Emulate corruption in binlog file when SHOW BINLOG EVENTS is executing
--echo # 2. Corruption in master binlog and SHOW BINLOG EVENTS --echo # 2. Corruption in master binlog and SHOW BINLOG EVENTS
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char"; SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char";
--echo SHOW BINLOG EVENTS; --echo SHOW BINLOG EVENTS;
--disable_query_log --disable_query_log
...@@ -167,10 +168,10 @@ let $diff_tables= master:test.t1, slave:test.t1; ...@@ -167,10 +168,10 @@ let $diff_tables= master:test.t1, slave:test.t1;
# Clean up # Clean up
--echo # 8. Clean up --echo # 8. Clean up
--connection master --connection master
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
SET GLOBAL master_verify_checksum = @old_master_verify_checksum; SET GLOBAL master_verify_checksum = @old_master_verify_checksum;
DROP TABLE t1; DROP TABLE t1;
--sync_slave_with_master --sync_slave_with_master
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
--source include/rpl_end.inc --source include/rpl_end.inc
mysql-test/extra/rpl_tests/rpl_incident.inc
View file @ 451573fa
...@@ -20,7 +20,7 @@ CREATE TABLE t1 (a INT); ...@@ -20,7 +20,7 @@ CREATE TABLE t1 (a INT);
INSERT INTO t1 VALUES (1),(2),(3); INSERT INTO t1 VALUES (1),(2),(3);
SELECT * FROM t1; SELECT * FROM t1;
let $debug_save= `SELECT @@GLOBAL.debug`; set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*'; SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*';
# This will generate an incident log event and store it in the binary # This will generate an incident log event and store it in the binary
...@@ -29,9 +29,7 @@ REPLACE INTO t1 VALUES (4); ...@@ -29,9 +29,7 @@ REPLACE INTO t1 VALUES (4);
--save_master_pos --save_master_pos
SELECT * FROM t1; SELECT * FROM t1;
--disable_query_log set @@global.debug_dbug = @saved_dbug;
eval SET GLOBAL debug_dbug= '$debug_save';
--enable_query_log
connection slave; connection slave;
# Wait until SQL thread stops with error LOST_EVENT on master # Wait until SQL thread stops with error LOST_EVENT on master
......
mysql-test/extra/rpl_tests/rpl_init_slave_errors.inc
View file @ 451573fa
...@@ -51,6 +51,7 @@ reset slave; ...@@ -51,6 +51,7 @@ reset slave;
connection slave; connection slave;
# Set debug flags on slave to force errors to occur # Set debug flags on slave to force errors to occur
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init"; SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
start slave; start slave;
...@@ -66,7 +67,7 @@ start slave; ...@@ -66,7 +67,7 @@ start slave;
call mtr.add_suppression("Failed during slave.* thread initialization"); call mtr.add_suppression("Failed during slave.* thread initialization");
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
###################################################################### ######################################################################
# Injecting faults in the init_slave option # Injecting faults in the init_slave option
......
mysql-test/include/binlog_inject_error.inc
View file @ 451573fa
...@@ -13,10 +13,10 @@ ...@@ -13,10 +13,10 @@
# let query= 'CREATE TABLE t1 (a INT)'; # let query= 'CREATE TABLE t1 (a INT)';
# source include/binlog_inject_error.inc; # source include/binlog_inject_error.inc;
# #
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
--echo $query; --echo $query;
--replace_regex /(errno: .*)/(errno: #)/ --replace_regex /(errno: .*)/(errno: #)/
--error ER_ERROR_ON_WRITE --error ER_ERROR_ON_WRITE
--eval $query --eval $query
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
mysql-test/r/cache_temporal_4265.result
View file @ 451573fa
create table t1 (a date); create table t1 (a date);
insert t1 values ('2000-01-02'), ('2001-02-03'), ('2002-03-04'); insert t1 values ('2000-01-02'), ('2001-02-03'), ('2002-03-04');
set debug_dbug='d,str_to_datetime_warn'; SET STATEMENT debug_dbug='d,str_to_datetime_warn' for
select * from t1 where a > date_add('2000-01-01', interval 5 day); select * from t1 where a > date_add('2000-01-01', interval 5 day);
a a
2001-02-03 2001-02-03
2002-03-04 2002-03-04
Warnings: Warnings:
Note 1003 2000-01-01 Note 1003 2000-01-01
set debug_dbug='';
drop table t1; drop table t1;
create table t1 (id int not null, ut timestamp(6) not null); create table t1 (id int not null, ut timestamp(6) not null);
insert into t1 values(1, '2001-01-01 00:00:00.2'); insert into t1 values(1, '2001-01-01 00:00:00.2');
......
mysql-test/r/drop_bad_db_type.result
View file @ 451573fa
SET @save_dbug = @@debug_dbug; SET @saved_dbug = @@debug_dbug;
set debug_dbug='+d,unstable_db_type'; set debug_dbug='+d,unstable_db_type';
install soname 'ha_archive'; install soname 'ha_archive';
create table t1 (a int) engine=archive; create table t1 (a int) engine=archive;
...@@ -33,4 +33,4 @@ t1.frm ...@@ -33,4 +33,4 @@ t1.frm
drop table t1; drop table t1;
db.opt db.opt
uninstall soname 'ha_archive'; uninstall soname 'ha_archive';
set debug_dbug=@save_dbug; set debug_dbug=@saved_dbug;
mysql-test/r/engine_error_in_alter-8453.result
View file @ 451573fa
create table t1 (a int, b int); create table t1 (a int, b int);
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,external_lock_failure'; set debug_dbug='+d,external_lock_failure';
alter table t1 add column c int; alter table t1 add column c int;
ERROR HY000: Got error 168 'KABOOM!' from MyISAM ERROR HY000: Got error 168 'KABOOM!' from MyISAM
set debug_dbug=''; set debug_dbug= @saved_dbug;
drop table t1; drop table t1;
mysql-test/r/error_simulation.result
View file @ 451573fa
...@@ -10,6 +10,7 @@ INSERT INTO t1 VALUES ...@@ -10,6 +10,7 @@ INSERT INTO t1 VALUES
('AAAAAAAAAH','AAAAAAAAAH'), ('AAAAAAAAAI','AAAAAAAAAI'), ('AAAAAAAAAH','AAAAAAAAAH'), ('AAAAAAAAAI','AAAAAAAAAI'),
('AAAAAAAAAJ','AAAAAAAAAJ'), ('AAAAAAAAAK','AAAAAAAAAK'); ('AAAAAAAAAJ','AAAAAAAAAJ'), ('AAAAAAAAAK','AAAAAAAAAK');
set tmp_table_size=1024; set tmp_table_size=1024;
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,raise_error"; set session debug_dbug="+d,raise_error";
SELECT MAX(a) FROM t1 GROUP BY a,b; SELECT MAX(a) FROM t1 GROUP BY a,b;
ERROR 23000: Can't write; duplicate key in table '(temporary)' ERROR 23000: Can't write; duplicate key in table '(temporary)'
...@@ -22,7 +23,7 @@ CREATE TABLE t1 (a INT(100) NOT NULL); ...@@ -22,7 +23,7 @@ CREATE TABLE t1 (a INT(100) NOT NULL);
INSERT INTO t1 VALUES (1), (0), (2); INSERT INTO t1 VALUES (1), (0), (2);
SET SESSION debug_dbug='+d,alter_table_only_index_change'; SET SESSION debug_dbug='+d,alter_table_only_index_change';
ALTER TABLE t1 ADD INDEX a(a); ALTER TABLE t1 ADD INDEX a(a);
SET SESSION debug_dbug=DEFAULT; set debug_dbug= @saved_dbug;
SHOW CREATE TABLE t1; SHOW CREATE TABLE t1;
Table Create Table Table Create Table
t1 CREATE TABLE `t1` ( t1 CREATE TABLE `t1` (
...@@ -42,7 +43,7 @@ CREATE TABLE t1(a BLOB); ...@@ -42,7 +43,7 @@ CREATE TABLE t1(a BLOB);
SET SESSION debug_dbug="+d,bug42064_simulate_oom"; SET SESSION debug_dbug="+d,bug42064_simulate_oom";
INSERT INTO t1 VALUES(""); INSERT INTO t1 VALUES("");
Got one of the listed errors Got one of the listed errors
SET SESSION debug_dbug=DEFAULT; set debug_dbug= @saved_dbug;
DROP TABLE t1; DROP TABLE t1;
# #
# Bug#41660: Sort-index_merge for non-first join table may require # Bug#41660: Sort-index_merge for non-first join table may require
...@@ -79,7 +80,7 @@ a a b filler ...@@ -79,7 +80,7 @@ a a b filler
7 1 1 data 7 1 1 data
8 1 1 data 8 1 1 data
9 1 1 data 9 1 1 data
SET SESSION debug_dbug= DEFAULT; set debug_dbug= @saved_dbug;
SET optimizer_switch=@save_optimizer_switch; SET optimizer_switch=@save_optimizer_switch;
DROP TABLE t1, t2; DROP TABLE t1, t2;
# #
...@@ -92,7 +93,7 @@ INSERT INTO t2 VALUES (1),(2); ...@@ -92,7 +93,7 @@ INSERT INTO t2 VALUES (1),(2);
SET SESSION debug_dbug="+d,bug11747970_raise_error"; SET SESSION debug_dbug="+d,bug11747970_raise_error";
INSERT IGNORE INTO t2 SELECT f1 FROM t1 a WHERE NOT EXISTS (SELECT 1 FROM t2 b WHERE a.f1 = b.f1); INSERT IGNORE INTO t2 SELECT f1 FROM t1 a WHERE NOT EXISTS (SELECT 1 FROM t2 b WHERE a.f1 = b.f1);
ERROR 70100: Query execution was interrupted ERROR 70100: Query execution was interrupted
SET SESSION debug_dbug = DEFAULT; set debug_dbug= @saved_dbug;
DROP TABLE t1,t2; DROP TABLE t1,t2;
# #
# End of 5.1 tests # End of 5.1 tests
...@@ -126,4 +127,4 @@ SET SESSION debug_dbug="+d,simulate_create_virtual_tmp_table_out_of_memory"; ...@@ -126,4 +127,4 @@ SET SESSION debug_dbug="+d,simulate_create_virtual_tmp_table_out_of_memory";
SELECT f1(1); SELECT f1(1);
Got one of the listed errors Got one of the listed errors
DROP FUNCTION f1; DROP FUNCTION f1;
SET SESSION debug_dbug=DEFAULT; set debug_dbug= @saved_dbug;
mysql-test/r/func_regexp_pcre_debug.result
View file @ 451573fa
SET debug_dbug='+d,pcre_exec_error_123'; SET STATEMENT debug_dbug='+d,pcre_exec_error_123' for
SELECT 'a' RLIKE 'a'; SELECT 'a' RLIKE 'a';
'a' RLIKE 'a' 'a' RLIKE 'a'
0 0
Warnings: Warnings:
Warning 1139 Got error 'pcre_exec: Internal error (-123)' from regexp Warning 1139 Got error 'pcre_exec: Internal error (-123)' from regexp
SET debug_dbug='';
SELECT 'a' RLIKE 'a'; SELECT 'a' RLIKE 'a';
'a' RLIKE 'a' 'a' RLIKE 'a'
1 1
mysql-test/r/log_slow_debug.result
View file @ 451573fa
...@@ -6,7 +6,7 @@ SET @@GLOBAL.log_output='TABLE'; ...@@ -6,7 +6,7 @@ SET @@GLOBAL.log_output='TABLE';
FLUSH SLOW LOGS; FLUSH SLOW LOGS;
SET @@GLOBAL.slow_query_log=ON; SET @@GLOBAL.slow_query_log=ON;
SET @@GLOBAL.log_slow_admin_statements=ON; SET @@GLOBAL.log_slow_admin_statements=ON;
SET @save_dbug = @@debug_dbug; SET @saved_dbug = @@debug_dbug;
SET SESSION debug_dbug="+d,simulate_slow_query"; SET SESSION debug_dbug="+d,simulate_slow_query";
CREATE PROCEDURE show_slow_log() CREATE PROCEDURE show_slow_log()
BEGIN BEGIN
...@@ -130,7 +130,7 @@ sql_text ...@@ -130,7 +130,7 @@ sql_text
# #
# Clean up # Clean up
# #
SET SESSION debug_dbug=@save_dbug; SET SESSION debug_dbug=@saved_dbug;
TRUNCATE mysql.slow_log; TRUNCATE mysql.slow_log;
SET @@global.slow_query_log= @org_slow_query_log; SET @@global.slow_query_log= @org_slow_query_log;
SET @@global.log_output= @org_log_output; SET @@global.log_output= @org_log_output;
......
mysql-test/r/mdev6830.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug= 'd,opt'; set @@debug_dbug= 'd,opt';
CREATE TABLE t1 (pk INT PRIMARY KEY) ENGINE=MyISAM; CREATE TABLE t1 (pk INT PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 ( CREATE TABLE t2 (
...@@ -46,3 +47,4 @@ SELECT * FROM t1, v3, t4 WHERE v3.f1 = t4.f1 AND t4.f2 = 6 AND t1.pk = v3.f5; ...@@ -46,3 +47,4 @@ SELECT * FROM t1, v3, t4 WHERE v3.f1 = t4.f1 AND t4.f2 = 6 AND t1.pk = v3.f5;
pk f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 f13 f14 f15 f1 f2 pk f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 f13 f14 f15 f1 f2
drop table t1,t2,t3,t4; drop table t1,t2,t3,t4;
drop view v2,v3; drop view v2,v3;
set debug_dbug= @saved_dbug;
mysql-test/r/merge-big.result
View file @ 451573fa
...@@ -7,7 +7,7 @@ drop table if exists t1,t2,t3,t4,t5,t6; ...@@ -7,7 +7,7 @@ drop table if exists t1,t2,t3,t4,t5,t6;
CREATE TABLE t1 (c1 INT) ENGINE= MyISAM; CREATE TABLE t1 (c1 INT) ENGINE= MyISAM;
LOCK TABLE t1 WRITE; LOCK TABLE t1 WRITE;
connect con1,localhost,root,,; connect con1,localhost,root,,;
SET @orig_debug=@@debug; SET @orig_debug=@@global.debug_dbug;
SET GLOBAL debug_dbug="+d,sleep_open_and_lock_after_open"; SET GLOBAL debug_dbug="+d,sleep_open_and_lock_after_open";
INSERT INTO t1 VALUES (1); INSERT INTO t1 VALUES (1);
connection default; connection default;
......
mysql-test/r/merge_debug.result
View file @ 451573fa
...@@ -3,7 +3,7 @@ set global storage_engine=myisam; ...@@ -3,7 +3,7 @@ set global storage_engine=myisam;
set session storage_engine=myisam; set session storage_engine=myisam;
call mtr.add_suppression("Index for table .*crashed' is corrupt; try to repair it"); call mtr.add_suppression("Index for table .*crashed' is corrupt; try to repair it");
drop table if exists crashed,t2,t3,t4; drop table if exists crashed,t2,t3,t4;
SET @orig_debug=@@debug; SET @orig_debug=@@global.debug_dbug;
CREATE TABLE crashed (c1 INT); CREATE TABLE crashed (c1 INT);
CREATE TABLE t2 (c1 INT); CREATE TABLE t2 (c1 INT);
CREATE TABLE t3 (c1 INT); CREATE TABLE t3 (c1 INT);
......
mysql-test/r/range_innodb.result
View file @ 451573fa
...@@ -70,6 +70,7 @@ key(a),key(b),key(c) ...@@ -70,6 +70,7 @@ key(a),key(b),key(c)
insert into t1 insert into t1
select A.a+10*B.a, A.a+10*B.a, A.a+10*B.a+100*C.a select A.a+10*B.a, A.a+10*B.a, A.a+10*B.a+100*C.a
from t0 A, t0 B, t0 C, t0 D where D.a<5; from t0 A, t0 B, t0 C, t0 D where D.a<5;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug="+d,ha_index_init_fail"; set @@global.debug_dbug="+d,ha_index_init_fail";
explain select * from t1 where a=10 and b=10; explain select * from t1 where a=10 and b=10;
id select_type table type possible_keys key key_len ref rows Extra id select_type table type possible_keys key key_len ref rows Extra
...@@ -77,5 +78,5 @@ id select_type table type possible_keys key key_len ref rows Extra ...@@ -77,5 +78,5 @@ id select_type table type possible_keys key key_len ref rows Extra
select * from t1 where a=10 and b=10; select * from t1 where a=10 and b=10;
ERROR HY000: Table definition has changed, please retry transaction ERROR HY000: Table definition has changed, please retry transaction
DROP TABLE t0,t1; DROP TABLE t0,t1;
set @@global.debug_dbug="-d"; set @@global.debug_dbug = @saved_dbug;
set @@optimizer_switch= @optimizer_switch_save; set @@optimizer_switch= @optimizer_switch_save;
mysql-test/r/select_debug.result
View file @ 451573fa
...@@ -6,6 +6,7 @@ insert into t1 values (2,2), (1,1); ...@@ -6,6 +6,7 @@ insert into t1 values (2,2), (1,1);
create table t2 (a int); create table t2 (a int);
insert into t2 values (2), (3); insert into t2 values (2), (3);
set session join_cache_level=3; set session join_cache_level=3;
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug= 'd,opt'; set @@debug_dbug= 'd,opt';
explain select t1.b from t1,t2 where t1.b=t2.a; explain select t1.b from t1,t2 where t1.b=t2.a;
id select_type table type possible_keys key key_len ref rows Extra id select_type table type possible_keys key key_len ref rows Extra
...@@ -16,3 +17,4 @@ b ...@@ -16,3 +17,4 @@ b
2 2
set session join_cache_level=default; set session join_cache_level=default;
drop table t1,t2; drop table t1,t2;
set debug_dbug= @saved_dbug;
mysql-test/r/show_explain_ps.result
View file @ 451573fa
...@@ -17,6 +17,7 @@ connection con1; ...@@ -17,6 +17,7 @@ connection con1;
connection default; connection default;
connection con1; connection con1;
set @show_explain_probe_select_id=1; set @show_explain_probe_select_id=1;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='d,show_explain_probe_join_exec_start'; set debug_dbug='d,show_explain_probe_join_exec_start';
select count(*) from t0 where a < 100000; select count(*) from t0 where a < 100000;
connection default; connection default;
...@@ -28,7 +29,7 @@ Note 1003 select count(*) from t0 where a < 100000 ...@@ -28,7 +29,7 @@ Note 1003 select count(*) from t0 where a < 100000
connection con1; connection con1;
count(*) count(*)
10 10
set debug_dbug=''; set debug_dbug= @saved_dbug;
select event_name select event_name
from from
performance_schema.events_stages_history_long join performance_schema.events_stages_history_long join
......
mysql-test/r/slowlog_enospace-10508.result
View file @ 451573fa
...@@ -3,6 +3,7 @@ create table t1 (a int, b int) engine=memory; ...@@ -3,6 +3,7 @@ create table t1 (a int, b int) engine=memory;
insert t1 select seq, seq+1 from seq_1_to_1000; insert t1 select seq, seq+1 from seq_1_to_1000;
set global general_log=0; set global general_log=0;
set global log_queries_not_using_indexes=1; set global log_queries_not_using_indexes=1;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,simulate_file_write_error'; set debug_dbug='+d,simulate_file_write_error';
select * from t1 where a>10; select * from t1 where a>10;
select * from t1 where a>10; select * from t1 where a>10;
...@@ -54,7 +55,7 @@ select * from t1 where a>10; ...@@ -54,7 +55,7 @@ select * from t1 where a>10;
select * from t1 where a>10; select * from t1 where a>10;
select * from t1 where a>10; select * from t1 where a>10;
select * from t1 where a>10; select * from t1 where a>10;
set debug_dbug=''; set debug_dbug= @saved_dbug;
set global general_log=1; set global general_log=1;
set global log_queries_not_using_indexes=default; set global log_queries_not_using_indexes=default;
drop table t1; drop table t1;
mysql-test/r/stat_tables-enospc.result
View file @ 451573fa
call mtr.add_suppression("No space left on device"); call mtr.add_suppression("No space left on device");
create table t1 (a varchar(255), b varchar(255), c varchar(255)); create table t1 (a varchar(255), b varchar(255), c varchar(255));
set use_stat_tables=PREFERABLY, optimizer_use_condition_selectivity=3; set use_stat_tables=PREFERABLY, optimizer_use_condition_selectivity=3;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,simulate_file_write_error'; set debug_dbug='+d,simulate_file_write_error';
set @@max_heap_table_size=128*1024; set @@max_heap_table_size=128*1024;
analyze table t1; analyze table t1;
Table Op Msg_type Msg_text Table Op Msg_type Msg_text
test.t1 analyze Error Error writing file 'tmp-file' (Errcode: 28 "No space left on device") test.t1 analyze Error Error writing file 'tmp-file' (Errcode: 28 "No space left on device")
test.t1 analyze status Operation failed test.t1 analyze status Operation failed
set debug_dbug=''; set debug_dbug= @saved_dbug;
drop table t1; drop table t1;
mysql-test/r/union_crash-714.result
View file @ 451573fa
create table t1 (i tinyint); create table t1 (i tinyint);
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,bug11747970_raise_error'; set debug_dbug='+d,bug11747970_raise_error';
insert into t1 (i) select i from t1 union select i from t1; insert into t1 (i) select i from t1 union select i from t1;
ERROR 70100: Query execution was interrupted ERROR 70100: Query execution was interrupted
drop table t1; drop table t1;
set debug_dbug= @saved_dbug;
mysql-test/r/warnings_debug.result
View file @ 451573fa
drop table if exists t1; drop table if exists t1;
create table t1 (a int primary key) engine=innodb; create table t1 (a int primary key) engine=innodb;
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug="+d,warn_during_ha_commit_trans"; SET SESSION debug_dbug="+d,warn_during_ha_commit_trans";
INSERT INTO t1 VALUES (1); INSERT INTO t1 VALUES (1);
Warnings: Warnings:
...@@ -8,3 +9,4 @@ SHOW WARNINGS; ...@@ -8,3 +9,4 @@ SHOW WARNINGS;
Level Code Message Level Code Message
Warning 1196 Some non-transactional changed tables couldn't be rolled back Warning 1196 Some non-transactional changed tables couldn't be rolled back
drop table t1; drop table t1;
set debug_dbug= @saved_dbug;
mysql-test/suite/binlog/r/binlog_ioerr.result
View file @ 451573fa
...@@ -2,12 +2,13 @@ CALL mtr.add_suppression("Error writing file 'master-bin'"); ...@@ -2,12 +2,13 @@ CALL mtr.add_suppression("Error writing file 'master-bin'");
RESET MASTER; RESET MASTER;
CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb; CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb;
INSERT INTO t1 VALUES(0); INSERT INTO t1 VALUES(0);
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug='+d,fail_binlog_write_1'; SET SESSION debug_dbug='+d,fail_binlog_write_1';
INSERT INTO t1 VALUES(1); INSERT INTO t1 VALUES(1);
ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device") ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device")
INSERT INTO t1 VALUES(2); INSERT INTO t1 VALUES(2);
ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device") ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device")
SET SESSION debug_dbug=''; SET SESSION debug_dbug=@saved_dbug;
INSERT INTO t1 VALUES(3); INSERT INTO t1 VALUES(3);
SELECT * FROM t1; SELECT * FROM t1;
a a
......
mysql-test/suite/binlog/r/binlog_write_error.result
View file @ 451573fa
...@@ -12,92 +12,109 @@ DROP VIEW IF EXISTS v1, v2; ...@@ -12,92 +12,109 @@ DROP VIEW IF EXISTS v1, v2;
# #
# Test injecting binlog write error when executing queries # Test injecting binlog write error when executing queries
# #
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE TABLE t1 (a INT); CREATE TABLE t1 (a INT);
CREATE TABLE t1 (a INT); CREATE TABLE t1 (a INT);
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
INSERT INTO t1 VALUES (1),(2),(3); INSERT INTO t1 VALUES (1),(2),(3);
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
INSERT INTO t1 VALUES (4),(5),(6); INSERT INTO t1 VALUES (4),(5),(6);
INSERT INTO t1 VALUES (4),(5),(6); INSERT INTO t1 VALUES (4),(5),(6);
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
UPDATE t1 set a=a+1; UPDATE t1 set a=a+1;
UPDATE t1 set a=a+1; UPDATE t1 set a=a+1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DELETE FROM t1; DELETE FROM t1;
DELETE FROM t1; DELETE FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100); CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100);
CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100); CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100);
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP TRIGGER tr1; DROP TRIGGER tr1;
DROP TRIGGER tr1; DROP TRIGGER tr1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
ALTER TABLE t1 ADD (b INT); ALTER TABLE t1 ADD (b INT);
ALTER TABLE t1 ADD (b INT); ALTER TABLE t1 ADD (b INT);
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE VIEW v1 AS SELECT a FROM t1; CREATE VIEW v1 AS SELECT a FROM t1;
CREATE VIEW v1 AS SELECT a FROM t1; CREATE VIEW v1 AS SELECT a FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP VIEW v1; DROP VIEW v1;
DROP VIEW v1; DROP VIEW v1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1; CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1;
CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1; CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP PROCEDURE p1; DROP PROCEDURE p1;
DROP PROCEDURE p1; DROP PROCEDURE p1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP TABLE t1; DROP TABLE t1;
DROP TABLE t1; DROP TABLE t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE FUNCTION f1() RETURNS INT return 1; CREATE FUNCTION f1() RETURNS INT return 1;
CREATE FUNCTION f1() RETURNS INT return 1; CREATE FUNCTION f1() RETURNS INT return 1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP FUNCTION f1; DROP FUNCTION f1;
DROP FUNCTION f1; DROP FUNCTION f1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE USER user1; CREATE USER user1;
CREATE USER user1; CREATE USER user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1; REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1;
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1; REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP USER user1; DROP USER user1;
DROP USER user1; DROP USER user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
# #
# Cleanup # Cleanup
# #
......
mysql-test/suite/binlog_encryption/binlog_ioerr.result
View file @ 451573fa
...@@ -2,12 +2,13 @@ CALL mtr.add_suppression("Error writing file 'master-bin'"); ...@@ -2,12 +2,13 @@ CALL mtr.add_suppression("Error writing file 'master-bin'");
RESET MASTER; RESET MASTER;
CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb; CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=innodb;
INSERT INTO t1 VALUES(0); INSERT INTO t1 VALUES(0);
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug='+d,fail_binlog_write_1'; SET SESSION debug_dbug='+d,fail_binlog_write_1';
INSERT INTO t1 VALUES(1); INSERT INTO t1 VALUES(1);
ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device") ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device")
INSERT INTO t1 VALUES(2); INSERT INTO t1 VALUES(2);
ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device") ERROR HY000: Error writing file 'master-bin' (errno: 28 "No space left on device")
SET SESSION debug_dbug=''; SET SESSION debug_dbug=@saved_dbug;
INSERT INTO t1 VALUES(3); INSERT INTO t1 VALUES(3);
SELECT * FROM t1; SELECT * FROM t1;
a a
......
mysql-test/suite/binlog_encryption/binlog_write_error.result
View file @ 451573fa
...@@ -12,92 +12,109 @@ DROP VIEW IF EXISTS v1, v2; ...@@ -12,92 +12,109 @@ DROP VIEW IF EXISTS v1, v2;
# #
# Test injecting binlog write error when executing queries # Test injecting binlog write error when executing queries
# #
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE TABLE t1 (a INT); CREATE TABLE t1 (a INT);
CREATE TABLE t1 (a INT); CREATE TABLE t1 (a INT);
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
INSERT INTO t1 VALUES (1),(2),(3); INSERT INTO t1 VALUES (1),(2),(3);
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
INSERT INTO t1 VALUES (4),(5),(6); INSERT INTO t1 VALUES (4),(5),(6);
INSERT INTO t1 VALUES (4),(5),(6); INSERT INTO t1 VALUES (4),(5),(6);
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
UPDATE t1 set a=a+1; UPDATE t1 set a=a+1;
UPDATE t1 set a=a+1; UPDATE t1 set a=a+1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DELETE FROM t1; DELETE FROM t1;
DELETE FROM t1; DELETE FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100); CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100);
CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100); CREATE TRIGGER tr1 AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t1 VALUES (new.a + 100);
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP TRIGGER tr1; DROP TRIGGER tr1;
DROP TRIGGER tr1; DROP TRIGGER tr1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
ALTER TABLE t1 ADD (b INT); ALTER TABLE t1 ADD (b INT);
ALTER TABLE t1 ADD (b INT); ALTER TABLE t1 ADD (b INT);
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE VIEW v1 AS SELECT a FROM t1; CREATE VIEW v1 AS SELECT a FROM t1;
CREATE VIEW v1 AS SELECT a FROM t1; CREATE VIEW v1 AS SELECT a FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP VIEW v1; DROP VIEW v1;
DROP VIEW v1; DROP VIEW v1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1; CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1;
CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1; CREATE PROCEDURE p1(OUT rows_cnt INT) SELECT count(*) INTO rows_cnt FROM t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP PROCEDURE p1; DROP PROCEDURE p1;
DROP PROCEDURE p1; DROP PROCEDURE p1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP TABLE t1; DROP TABLE t1;
DROP TABLE t1; DROP TABLE t1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE FUNCTION f1() RETURNS INT return 1; CREATE FUNCTION f1() RETURNS INT return 1;
CREATE FUNCTION f1() RETURNS INT return 1; CREATE FUNCTION f1() RETURNS INT return 1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP FUNCTION f1; DROP FUNCTION f1;
DROP FUNCTION f1; DROP FUNCTION f1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
CREATE USER user1; CREATE USER user1;
CREATE USER user1; CREATE USER user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1; REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1;
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1; REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug='d,injecting_fault_writing'; SET GLOBAL debug_dbug='d,injecting_fault_writing';
DROP USER user1; DROP USER user1;
DROP USER user1; DROP USER user1;
ERROR HY000: Error writing file 'master-bin' ((errno: #) ERROR HY000: Error writing file 'master-bin' ((errno: #)
SET GLOBAL debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
# #
# Cleanup # Cleanup
# #
......
mysql-test/suite/binlog_encryption/rpl_checksum.result
View file @ 451573fa
...@@ -76,6 +76,7 @@ connection master; ...@@ -76,6 +76,7 @@ connection master;
set @@global.binlog_checksum = CRC32; set @@global.binlog_checksum = CRC32;
insert into t1 values (1) /* will not be applied on slave due to simulation */; insert into t1 values (1) /* will not be applied on slave due to simulation */;
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_slave_unaware_checksum'; set @@global.debug_dbug='d,simulate_slave_unaware_checksum';
start slave; start slave;
include/wait_for_slave_io_error.inc [errno=1236] include/wait_for_slave_io_error.inc [errno=1236]
...@@ -83,15 +84,16 @@ Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary ...@@ -83,15 +84,16 @@ Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary
select count(*) as zero from t1; select count(*) as zero from t1;
zero zero
0 0
set @@global.debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
connection slave; connection slave;
include/start_slave.inc include/start_slave.inc
connection master; connection master;
set @@global.master_verify_checksum = 1; set @@global.master_verify_checksum = 1;
set @save_dbug = @@session.debug_dbug;
set @@session.debug_dbug='d,simulate_checksum_test_failure'; set @@session.debug_dbug='d,simulate_checksum_test_failure';
show binlog events; show binlog events;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
set @@session.debug_dbug=''; set debug_dbug= @save_dbug;
set @@global.master_verify_checksum = default; set @@global.master_verify_checksum = default;
connection slave; connection slave;
connection slave; connection slave;
...@@ -99,10 +101,11 @@ include/stop_slave.inc ...@@ -99,10 +101,11 @@ include/stop_slave.inc
connection master; connection master;
create table t2 (a int); create table t2 (a int);
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_checksum_test_failure'; set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave io_thread; start slave io_thread;
include/wait_for_slave_io_error.inc [errno=1595,1913] include/wait_for_slave_io_error.inc [errno=1595,1913]
set @@global.debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
start slave io_thread; start slave io_thread;
include/wait_for_slave_param.inc [Read_Master_Log_Pos] include/wait_for_slave_param.inc [Read_Master_Log_Pos]
set @@global.slave_sql_verify_checksum = 1; set @@global.slave_sql_verify_checksum = 1;
...@@ -110,7 +113,7 @@ set @@global.debug_dbug='d,simulate_checksum_test_failure'; ...@@ -110,7 +113,7 @@ set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave sql_thread; start slave sql_thread;
include/wait_for_slave_sql_error.inc [errno=1593] include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Error initializing relay log position: I/O error reading event at position 4' Last_SQL_Error = 'Error initializing relay log position: I/O error reading event at position 4'
set @@global.debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
include/start_slave.inc include/start_slave.inc
connection master; connection master;
connection slave; connection slave;
......
mysql-test/suite/binlog_encryption/rpl_corruption.result
View file @ 451573fa
...@@ -13,6 +13,7 @@ connection master; ...@@ -13,6 +13,7 @@ connection master;
CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY, b VARCHAR(10), c VARCHAR(100)); CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY, b VARCHAR(10), c VARCHAR(100));
include/stop_slave.inc include/stop_slave.inc
# 2. Corruption in master binlog and SHOW BINLOG EVENTS # 2. Corruption in master binlog and SHOW BINLOG EVENTS
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char"; SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char";
SHOW BINLOG EVENTS; SHOW BINLOG EVENTS;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
...@@ -55,9 +56,9 @@ connection slave; ...@@ -55,9 +56,9 @@ connection slave;
include/diff_tables.inc [master:test.t1, slave:test.t1] include/diff_tables.inc [master:test.t1, slave:test.t1]
# 8. Clean up # 8. Clean up
connection master; connection master;
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
SET GLOBAL master_verify_checksum = @old_master_verify_checksum; SET GLOBAL master_verify_checksum = @old_master_verify_checksum;
DROP TABLE t1; DROP TABLE t1;
connection slave; connection slave;
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_incident.result
View file @ 451573fa
...@@ -14,6 +14,7 @@ a ...@@ -14,6 +14,7 @@ a
1 1
2 2
3 3
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*'; SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*';
REPLACE INTO t1 VALUES (4); REPLACE INTO t1 VALUES (4);
SELECT * FROM t1; SELECT * FROM t1;
...@@ -22,6 +23,7 @@ a ...@@ -22,6 +23,7 @@ a
2 2
3 3
4 4
set @@global.debug_dbug = @saved_dbug;
connection slave; connection slave;
call mtr.add_suppression("Slave SQL.*The incident LOST_EVENTS occurred on the master.* 1590"); call mtr.add_suppression("Slave SQL.*The incident LOST_EVENTS occurred on the master.* 1590");
include/wait_for_slave_sql_error.inc [errno=1590] include/wait_for_slave_sql_error.inc [errno=1590]
......
mysql-test/suite/binlog_encryption/rpl_init_slave_errors.result
View file @ 451573fa
...@@ -4,12 +4,13 @@ connection slave; ...@@ -4,12 +4,13 @@ connection slave;
stop slave; stop slave;
reset slave; reset slave;
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init"; SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
start slave; start slave;
include/wait_for_slave_sql_error.inc [errno=1593] include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Failed during slave thread initialization' Last_SQL_Error = 'Failed during slave thread initialization'
call mtr.add_suppression("Failed during slave.* thread initialization"); call mtr.add_suppression("Failed during slave.* thread initialization");
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
connection slave; connection slave;
reset slave; reset slave;
SET GLOBAL init_slave= "garbage"; SET GLOBAL init_slave= "garbage";
......
mysql-test/suite/innodb/r/blob-update-debug.result
View file @ 451573fa
...@@ -7,9 +7,11 @@ insert into t1 values (1, repeat('*', 50000)); ...@@ -7,9 +7,11 @@ insert into t1 values (1, repeat('*', 50000));
select f1, substring(f2, 1, 40) from t1; select f1, substring(f2, 1, 40) from t1;
f1 substring(f2, 1, 40) f1 substring(f2, 1, 40)
1 **************************************** 1 ****************************************
set @saved_debug = @@session.debug_dbug;
set debug_dbug = 'd,row_ins_index_entry_timeout'; set debug_dbug = 'd,row_ins_index_entry_timeout';
update t1 set f1 = 3; update t1 set f1 = 3;
select f1, substring(f2, 1, 40) from t1; select f1, substring(f2, 1, 40) from t1;
f1 substring(f2, 1, 40) f1 substring(f2, 1, 40)
3 **************************************** 3 ****************************************
drop table t1; drop table t1;
set debug_dbug= @saved_debug;
mysql-test/suite/innodb/r/innodb-stats-initialize-failure.result
View file @ 451573fa
call mtr.add_suppression("InnoDB: Warning: Index.*"); call mtr.add_suppression("InnoDB: Warning: Index.*");
set @saved_dbug = @@session.debug_dbug;
set DEBUG_DBUG='+d,ib_ha_innodb_stat_not_initialized'; set DEBUG_DBUG='+d,ib_ha_innodb_stat_not_initialized';
create table t1(a int not null primary key, b int, c int, key(b), key(c)) engine=innodb; create table t1(a int not null primary key, b int, c int, key(b), key(c)) engine=innodb;
create procedure innodb_insert_proc (repeat_count int) create procedure innodb_insert_proc (repeat_count int)
...@@ -27,6 +28,6 @@ count(1) ...@@ -27,6 +28,6 @@ count(1)
select count(1) from t1 where c between 7 and 787; select count(1) from t1 where c between 7 and 787;
count(1) count(1)
781 781
set DEBUG_DBUG=NULL;
drop procedure innodb_insert_proc; drop procedure innodb_insert_proc;
drop table t1; drop table t1;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/r/innodb_bug11754376.result
View file @ 451573fa
CREATE TABLE bug11754376 (c INT) ENGINE=INNODB; CREATE TABLE bug11754376 (c INT) ENGINE=INNODB;
set @saved_dbug = @@session.debug_dbug;
SET SESSION DEBUG_DBUG='+d,test_normalize_table_name_low'; SET SESSION DEBUG_DBUG='+d,test_normalize_table_name_low';
DROP TABLE bug11754376; DROP TABLE bug11754376;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/r/innodb_bug56947.result
View file @ 451573fa
SET GLOBAL innodb_file_per_table=0; SET GLOBAL innodb_file_per_table=0;
create table bug56947(a int not null) engine = innodb; create table bug56947(a int not null) engine = innodb;
set @saved_dbug = @@session.debug_dbug;
SET DEBUG_DBUG='+d,ib_rebuild_cannot_rename'; SET DEBUG_DBUG='+d,ib_rebuild_cannot_rename';
alter table bug56947 add unique index (a); alter table bug56947 add unique index (a);
ERROR HY000: Got error 11 "xxx" from storage engine InnoDB ERROR HY000: Got error 11 "xxx" from storage engine InnoDB
...@@ -8,3 +9,4 @@ Table Op Msg_type Msg_text ...@@ -8,3 +9,4 @@ Table Op Msg_type Msg_text
test.bug56947 check status OK test.bug56947 check status OK
drop table bug56947; drop table bug56947;
SET @@global.innodb_file_per_table=DEFAULT; SET @@global.innodb_file_per_table=DEFAULT;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/r/innodb_sys_semaphore_waits.result
View file @ 451573fa
...@@ -4,6 +4,7 @@ drop table if exists t1; ...@@ -4,6 +4,7 @@ drop table if exists t1;
connection con1; connection con1;
create table t1 (id integer, x integer) engine = InnoDB; create table t1 (id integer, x integer) engine = InnoDB;
insert into t1 values(0, 0); insert into t1 values(0, 0);
set @saved_dbug = @@session.debug_dbug;
set DEBUG_DBUG='+d,fatal-semaphore-timeout'; set DEBUG_DBUG='+d,fatal-semaphore-timeout';
set autocommit=0; set autocommit=0;
# Sending query on con1, # Sending query on con1,
...@@ -21,6 +22,6 @@ connection default; ...@@ -21,6 +22,6 @@ connection default;
# Waitting for reconnect after mysqld restarts # Waitting for reconnect after mysqld restarts
# Reconnected after mysqld was successfully restarted # Reconnected after mysqld was successfully restarted
# Cleaning up before exit # Cleaning up before exit
set DEBUG_DBUG=NULL; set debug_dbug = @saved_dbug;
drop table if exists t1; drop table if exists t1;
# Clean exit # Clean exit
mysql-test/suite/innodb/t/blob-update-debug.test
View file @ 451573fa
...@@ -11,7 +11,9 @@ ...@@ -11,7 +11,9 @@
create table t1 (f1 int primary key, f2 blob) engine = innodb; create table t1 (f1 int primary key, f2 blob) engine = innodb;
insert into t1 values (1, repeat('*', 50000)); insert into t1 values (1, repeat('*', 50000));
select f1, substring(f2, 1, 40) from t1; select f1, substring(f2, 1, 40) from t1;
set @saved_debug = @@session.debug_dbug;
set debug_dbug = 'd,row_ins_index_entry_timeout'; set debug_dbug = 'd,row_ins_index_entry_timeout';
update t1 set f1 = 3; update t1 set f1 = 3;
select f1, substring(f2, 1, 40) from t1; select f1, substring(f2, 1, 40) from t1;
drop table t1; drop table t1;
set debug_dbug= @saved_debug;
mysql-test/suite/innodb/t/innodb-stats-initialize-failure.test
View file @ 451573fa
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
call mtr.add_suppression("InnoDB: Warning: Index.*"); call mtr.add_suppression("InnoDB: Warning: Index.*");
# This caused crash earlier # This caused crash earlier
set @saved_dbug = @@session.debug_dbug;
set DEBUG_DBUG='+d,ib_ha_innodb_stat_not_initialized'; set DEBUG_DBUG='+d,ib_ha_innodb_stat_not_initialized';
create table t1(a int not null primary key, b int, c int, key(b), key(c)) engine=innodb; create table t1(a int not null primary key, b int, c int, key(b), key(c)) engine=innodb;
...@@ -32,8 +33,8 @@ select count(1) from t1 where a between 5 and 100; ...@@ -32,8 +33,8 @@ select count(1) from t1 where a between 5 and 100;
select count(1) from t1 where b between 5 and 256; select count(1) from t1 where b between 5 and 256;
select count(1) from t1 where c between 7 and 787; select count(1) from t1 where c between 7 and 787;
set DEBUG_DBUG=NULL;
drop procedure innodb_insert_proc; drop procedure innodb_insert_proc;
drop table t1; drop table t1;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/t/innodb_bug11754376.test
View file @ 451573fa
...@@ -8,7 +8,8 @@ ...@@ -8,7 +8,8 @@
CREATE TABLE bug11754376 (c INT) ENGINE=INNODB; CREATE TABLE bug11754376 (c INT) ENGINE=INNODB;
# This will invoke test_normalize_table_name_low() in debug builds # This will invoke test_normalize_table_name_low() in debug builds
set @saved_dbug = @@session.debug_dbug;
SET SESSION DEBUG_DBUG='+d,test_normalize_table_name_low'; SET SESSION DEBUG_DBUG='+d,test_normalize_table_name_low';
DROP TABLE bug11754376; DROP TABLE bug11754376;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/t/innodb_bug56947.test
View file @ 451573fa
...@@ -7,6 +7,7 @@ ...@@ -7,6 +7,7 @@
SET GLOBAL innodb_file_per_table=0; SET GLOBAL innodb_file_per_table=0;
create table bug56947(a int not null) engine = innodb; create table bug56947(a int not null) engine = innodb;
set @saved_dbug = @@session.debug_dbug;
SET DEBUG_DBUG='+d,ib_rebuild_cannot_rename'; SET DEBUG_DBUG='+d,ib_rebuild_cannot_rename';
--replace_regex /"[^"]*"/"xxx"/ --replace_regex /"[^"]*"/"xxx"/
--error ER_GET_ERRNO --error ER_GET_ERRNO
...@@ -15,3 +16,4 @@ check table bug56947; ...@@ -15,3 +16,4 @@ check table bug56947;
drop table bug56947; drop table bug56947;
SET @@global.innodb_file_per_table=DEFAULT; SET @@global.innodb_file_per_table=DEFAULT;
set debug_dbug= @saved_dbug;
mysql-test/suite/innodb/t/innodb_sys_semaphore_waits.test
View file @ 451573fa
...@@ -17,6 +17,7 @@ eval create table t1 (id integer, x integer) engine = InnoDB; ...@@ -17,6 +17,7 @@ eval create table t1 (id integer, x integer) engine = InnoDB;
insert into t1 values(0, 0); insert into t1 values(0, 0);
# Enable the debug injection. # Enable the debug injection.
set @saved_dbug = @@session.debug_dbug;
set DEBUG_DBUG='+d,fatal-semaphore-timeout'; set DEBUG_DBUG='+d,fatal-semaphore-timeout';
set autocommit=0; set autocommit=0;
...@@ -107,7 +108,7 @@ source include/wait_until_connected_again.inc; ...@@ -107,7 +108,7 @@ source include/wait_until_connected_again.inc;
--echo # Cleaning up before exit --echo # Cleaning up before exit
--disable_warnings --disable_warnings
set DEBUG_DBUG=NULL; set debug_dbug = @saved_dbug;
drop table if exists t1; drop table if exists t1;
--enable_warnings --enable_warnings
......
mysql-test/suite/innodb_fts/r/concurrent_insert.result
View file @ 451573fa
...@@ -17,6 +17,7 @@ INSERT INTO t1 VALUES('test'); ...@@ -17,6 +17,7 @@ INSERT INTO t1 VALUES('test');
CREATE TABLE t2 (f1 char(100), FULLTEXT idx1(f1))ENGINE=InnoDB; CREATE TABLE t2 (f1 char(100), FULLTEXT idx1(f1))ENGINE=InnoDB;
INSERT INTO t2 VALUES('mariadb'); INSERT INTO t2 VALUES('mariadb');
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug ='+d,fts_instrument_sync_request,ib_optimize_wq_hang'; SET GLOBAL debug_dbug ='+d,fts_instrument_sync_request,ib_optimize_wq_hang';
SET DEBUG_SYNC= 'fts_instrument_sync_request SET DEBUG_SYNC= 'fts_instrument_sync_request
SIGNAL drop_index_start WAIT_FOR sync_op'; SIGNAL drop_index_start WAIT_FOR sync_op';
...@@ -28,7 +29,7 @@ ALTER TABLE t2 drop index idx1; ...@@ -28,7 +29,7 @@ ALTER TABLE t2 drop index idx1;
connection default; connection default;
set DEBUG_SYNC= 'now SIGNAL fts_drop_index'; set DEBUG_SYNC= 'now SIGNAL fts_drop_index';
connection con1; connection con1;
SET global DEBUG_DBUG=RESET; set @@global.debug_dbug = @saved_dbug;
drop table t1, t2; drop table t1, t2;
connection default; connection default;
set DEBUG_SYNC=RESET; set DEBUG_SYNC=RESET;
mysql-test/suite/innodb_fts/t/concurrent_insert.test
View file @ 451573fa
...@@ -29,6 +29,7 @@ CREATE TABLE t2 (f1 char(100), FULLTEXT idx1(f1))ENGINE=InnoDB; ...@@ -29,6 +29,7 @@ CREATE TABLE t2 (f1 char(100), FULLTEXT idx1(f1))ENGINE=InnoDB;
INSERT INTO t2 VALUES('mariadb'); INSERT INTO t2 VALUES('mariadb');
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug ='+d,fts_instrument_sync_request,ib_optimize_wq_hang'; SET GLOBAL debug_dbug ='+d,fts_instrument_sync_request,ib_optimize_wq_hang';
SET DEBUG_SYNC= 'fts_instrument_sync_request SET DEBUG_SYNC= 'fts_instrument_sync_request
SIGNAL drop_index_start WAIT_FOR sync_op'; SIGNAL drop_index_start WAIT_FOR sync_op';
...@@ -45,7 +46,7 @@ set DEBUG_SYNC= 'now SIGNAL fts_drop_index'; ...@@ -45,7 +46,7 @@ set DEBUG_SYNC= 'now SIGNAL fts_drop_index';
connection con1; connection con1;
reap; reap;
SET global DEBUG_DBUG=RESET; set @@global.debug_dbug = @saved_dbug;
drop table t1, t2; drop table t1, t2;
connection default; connection default;
set DEBUG_SYNC=RESET; set DEBUG_SYNC=RESET;
mysql-test/suite/optimizer_unfixed_bugs/r/bug36981.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
create table `t1` (`c1` char(1) default null,`c2` char(10) default null, create table `t1` (`c1` char(1) default null,`c2` char(10) default null,
key (`c1`)) key (`c1`))
...@@ -7,3 +8,4 @@ select * from `t1` where `c1`='3' for update; ...@@ -7,3 +8,4 @@ select * from `t1` where `c1`='3' for update;
c1 c2 c1 c2
3 NULL 3 NULL
drop table `t1`; drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug40992.result
View file @ 451573fa
# #
# Bug#40992 - InnoDB: Crash when engine_condition_pushdown is on # Bug#40992 - InnoDB: Crash when engine_condition_pushdown is on
# #
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t ( CREATE TABLE t (
dummy INT PRIMARY KEY, dummy INT PRIMARY KEY,
...@@ -13,3 +14,4 @@ dummy a b ...@@ -13,3 +14,4 @@ dummy a b
3 3 3 3 3 3
5 5 5 5 5 5
DROP TABLE t; DROP TABLE t;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug41996.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
drop table if exists `t1`; drop table if exists `t1`;
Warnings: Warnings:
...@@ -6,3 +7,4 @@ create table `t1` (`c` bigint, key(`c`),`a` int)engine=innodb; ...@@ -6,3 +7,4 @@ create table `t1` (`c` bigint, key(`c`),`a` int)engine=innodb;
insert into `t1` values(2,2); insert into `t1` values(2,2);
delete `t1` from `t1` `a`, `t1` where `a`.`a`=`t1`.`c` ; delete `t1` from `t1` `a`, `t1` where `a`.`a`=`t1`.`c` ;
drop table `t1`; drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug42991.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */; /*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;
/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */; /*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;
...@@ -252,3 +253,4 @@ Warning 1292 Truncated incorrect DOUBLE value: 'd' ...@@ -252,3 +253,4 @@ Warning 1292 Truncated incorrect DOUBLE value: 'd'
Warning 1292 Truncated incorrect DOUBLE value: 'd' Warning 1292 Truncated incorrect DOUBLE value: 'd'
Warning 1292 Truncated incorrect DOUBLE value: 'd' Warning 1292 Truncated incorrect DOUBLE value: 'd'
drop table `table5`; drop table `table5`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug43249.result
View file @ 451573fa
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1(c1 TIME NOT NULL, c2 TIME NULL, c3 DATE, PRIMARY CREATE TABLE t1(c1 TIME NOT NULL, c2 TIME NULL, c3 DATE, PRIMARY
KEY(c1), UNIQUE INDEX(c2)) engine=innodb; KEY(c1), UNIQUE INDEX(c2)) engine=innodb;
...@@ -9,3 +10,4 @@ SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2; ...@@ -9,3 +10,4 @@ SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2;
c1 c2 c3 c1 c2 c3
08:29:45 NULL 2009-02-01 08:29:45 NULL 2009-02-01
drop table `t1`; drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug43360.result
View file @ 451573fa
# #
# Bug#43360 - Server crash with a simple multi-table update # Bug#43360 - Server crash with a simple multi-table update
# #
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1 ( CREATE TABLE t1 (
a CHAR(2) NOT NULL PRIMARY KEY, a CHAR(2) NOT NULL PRIMARY KEY,
...@@ -42,3 +43,4 @@ AB Sweden ...@@ -42,3 +43,4 @@ AB Sweden
MS United States of Ame MS United States of Ame
JA USA JA USA
DROP TABLE t1,t2; DROP TABLE t1,t2;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug43448.result
View file @ 451573fa
# #
# Bug#43448 - Server crashes on multi table delete with Innodb # Bug#43448 - Server crashes on multi table delete with Innodb
# #
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1 ( CREATE TABLE t1 (
id1 INT NOT NULL AUTO_INCREMENT PRIMARY KEY, id1 INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
...@@ -28,3 +29,4 @@ DELETE t1, t2, t3 ...@@ -28,3 +29,4 @@ DELETE t1, t2, t3
FROM t1, t2, t3 FROM t1, t2, t3
WHERE t1.id1 = t2.id2 AND t2.id2 = t3.id3 AND t1.id1 > 5; WHERE t1.id1 = t2.id2 AND t2.id2 = t3.id3 AND t1.id1 > 5;
DROP TABLE t1, t2, t3; DROP TABLE t1, t2, t3;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/r/bug43617.result
View file @ 451573fa
set storage_engine=innodb; set storage_engine=innodb;
set @save_time_zone= @@time_zone; set @save_time_zone= @@time_zone;
set time_zone='+03:00'; set time_zone='+03:00';
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1(c1 TIMESTAMP NOT NULL, c2 TIMESTAMP NULL, c3 DATE, c4 DATETIME, PRIMARY KEY(c1), UNIQUE INDEX(c2)); CREATE TABLE t1(c1 TIMESTAMP NOT NULL, c2 TIMESTAMP NULL, c3 DATE, c4 DATETIME, PRIMARY KEY(c1), UNIQUE INDEX(c2));
INSERT INTO t1 VALUES('98-12-31 11:30:45','98.12.31 11+30+45','98-12-31 11:30:45','98.12.31 11+30+45'),('98/12/30 11*30*45','98@12@30 11^30^45','98/12/30 11*30*45','98@12@30 11^30^45'),('98-12-29','98.12.29','98-12-29','98.12.29'),('98/12/28','98@12@28','98/12/28','98@12@28'); INSERT INTO t1 VALUES('98-12-31 11:30:45','98.12.31 11+30+45','98-12-31 11:30:45','98.12.31 11+30+45'),('98/12/30 11*30*45','98@12@30 11^30^45','98/12/30 11*30*45','98@12@30 11^30^45'),('98-12-29','98.12.29','98-12-29','98.12.29'),('98/12/28','98@12@28','98/12/28','98@12@28');
...@@ -100,3 +101,4 @@ c1 c2 c3 c4 ...@@ -100,3 +101,4 @@ c1 c2 c3 c4
2038-01-09 03:14:07 2038-01-09 03:14:07 2009-01-05 2009-01-06 00:00:00 2038-01-09 03:14:07 2038-01-09 03:14:07 2009-01-05 2009-01-06 00:00:00
DROP TABLE t1; DROP TABLE t1;
set time_zone= @save_time_zone; set time_zone= @save_time_zone;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug36981.test
View file @ 451573fa
...@@ -4,6 +4,7 @@ ...@@ -4,6 +4,7 @@
--source include/have_innodb.inc --source include/have_innodb.inc
# crash requires this # crash requires this
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
create table `t1` (`c1` char(1) default null,`c2` char(10) default null, create table `t1` (`c1` char(1) default null,`c2` char(10) default null,
...@@ -12,3 +13,4 @@ engine=innodb default charset=latin1; ...@@ -12,3 +13,4 @@ engine=innodb default charset=latin1;
insert into `t1` values ('3',null); insert into `t1` values ('3',null);
select * from `t1` where `c1`='3' for update; select * from `t1` where `c1`='3' for update;
drop table `t1`; drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug40992.test
View file @ 451573fa
...@@ -5,6 +5,7 @@ ...@@ -5,6 +5,7 @@
--source include/have_debug.inc --source include/have_debug.inc
--source include/have_innodb.inc --source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
# Crash requires that we enable Index Condition Pushdown in InnoDB # Crash requires that we enable Index Condition Pushdown in InnoDB
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
...@@ -19,3 +20,4 @@ INSERT INTO t VALUES (1,1,1),(3,3,3),(5,5,5); ...@@ -19,3 +20,4 @@ INSERT INTO t VALUES (1,1,1),(3,3,3),(5,5,5);
SELECT * FROM t WHERE a > 2 FOR UPDATE; SELECT * FROM t WHERE a > 2 FOR UPDATE;
DROP TABLE t; DROP TABLE t;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug41996.test
View file @ 451573fa
...@@ -5,6 +5,7 @@ ...@@ -5,6 +5,7 @@
--source include/have_innodb.inc --source include/have_innodb.inc
# crash requires this # crash requires this
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
drop table if exists `t1`; drop table if exists `t1`;
...@@ -12,3 +13,4 @@ create table `t1` (`c` bigint, key(`c`),`a` int)engine=innodb; ...@@ -12,3 +13,4 @@ create table `t1` (`c` bigint, key(`c`),`a` int)engine=innodb;
insert into `t1` values(2,2); insert into `t1` values(2,2);
delete `t1` from `t1` `a`, `t1` where `a`.`a`=`t1`.`c` ; delete `t1` from `t1` `a`, `t1` where `a`.`a`=`t1`.`c` ;
drop table `t1`; drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug42991.test
View file @ 451573fa
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
--source include/have_innodb.inc --source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
# Valgrind errors happen only with this: # Valgrind errors happen only with this:
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
...@@ -246,3 +247,4 @@ UNLOCK TABLES; ...@@ -246,3 +247,4 @@ UNLOCK TABLES;
select * from `table5` where (col2 <= '6566-06-15' AND col24 <> 'd') group by `col83` order by `col83` desc ; select * from `table5` where (col2 <= '6566-06-15' AND col24 <> 'd') group by `col83` order by `col83` desc ;
drop table `table5`; drop table `table5`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug43249.test
View file @ 451573fa
...@@ -4,6 +4,7 @@ ...@@ -4,6 +4,7 @@
--source include/have_debug.inc --source include/have_debug.inc
--source include/have_innodb.inc --source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
CREATE TABLE t1(c1 TIME NOT NULL, c2 TIME NULL, c3 DATE, PRIMARY CREATE TABLE t1(c1 TIME NOT NULL, c2 TIME NULL, c3 DATE, PRIMARY
...@@ -15,3 +16,4 @@ SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2; ...@@ -15,3 +16,4 @@ SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2;
SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2; SELECT * FROM t1 WHERE c2 <=> NULL ORDER BY c2 LIMIT 2;
drop table `t1`; drop table `t1`;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug43360.test
View file @ 451573fa
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
--source include/have_debug.inc --source include/have_debug.inc
--source include/have_innodb.inc --source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
# crash requires this # crash requires this
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
...@@ -42,3 +43,4 @@ SELECT * FROM t1; ...@@ -42,3 +43,4 @@ SELECT * FROM t1;
SELECT * FROM t2; SELECT * FROM t2;
DROP TABLE t1,t2; DROP TABLE t1,t2;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug43448.test
View file @ 451573fa
...@@ -5,6 +5,7 @@ ...@@ -5,6 +5,7 @@
--source include/have_debug.inc --source include/have_debug.inc
--source include/have_innodb.inc --source include/have_innodb.inc
set @saved_dbug = @@session.debug_dbug;
# crash requires ICP support in InnoDB # crash requires ICP support in InnoDB
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
...@@ -58,3 +59,4 @@ FROM t1, t2, t3 ...@@ -58,3 +59,4 @@ FROM t1, t2, t3
WHERE t1.id1 = t2.id2 AND t2.id2 = t3.id3 AND t1.id1 > 5; WHERE t1.id1 = t2.id2 AND t2.id2 = t3.id3 AND t1.id1 > 5;
DROP TABLE t1, t2, t3; DROP TABLE t1, t2, t3;
set debug_dbug= @saved_dbug;
mysql-test/suite/optimizer_unfixed_bugs/t/bug43617.test
View file @ 451573fa
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
set storage_engine=innodb; set storage_engine=innodb;
set @save_time_zone= @@time_zone; set @save_time_zone= @@time_zone;
set time_zone='+03:00'; set time_zone='+03:00';
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,optimizer_innodb_icp"; set session debug_dbug="+d,optimizer_innodb_icp";
######## Running INSERT tests for TIMESTAMP ######## ######## Running INSERT tests for TIMESTAMP ########
...@@ -83,4 +84,4 @@ SELECT * FROM t1 WHERE c2 IN ('1971-01-01 00:00:01','2038-01-09 03:14:07') ORDER ...@@ -83,4 +84,4 @@ SELECT * FROM t1 WHERE c2 IN ('1971-01-01 00:00:01','2038-01-09 03:14:07') ORDER
DROP TABLE t1; DROP TABLE t1;
set time_zone= @save_time_zone; set time_zone= @save_time_zone;
set debug_dbug= @saved_dbug;
mysql-test/suite/parts/r/partition_debug.result
View file @ 451573fa
...@@ -6,11 +6,11 @@ CREATE TABLE t1 (a INT, b VARCHAR(64), KEY(b,a)) ...@@ -6,11 +6,11 @@ CREATE TABLE t1 (a INT, b VARCHAR(64), KEY(b,a))
PARTITION BY HASH (a) PARTITIONS 3; PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (1, "1"), (2, "2"), (3, "3"), (4, "Four"), (5, "Five"), INSERT INTO t1 VALUES (1, "1"), (2, "2"), (3, "3"), (4, "Four"), (5, "Five"),
(6, "Six"), (7, "Seven"), (8, "Eight"), (9, "Nine"); (6, "Six"), (7, "Seven"), (8, "Eight"), (9, "Nine");
SET @save_dbug=@@debug_dbug; SET @saved_dbug=@@debug_dbug;
SET SESSION debug_dbug="+d,ha_partition_fail_index_init"; SET SESSION debug_dbug="+d,ha_partition_fail_index_init";
SELECT * FROM t1 WHERE b = "Seven"; SELECT * FROM t1 WHERE b = "Seven";
ERROR HY000: Table has no partition for value 0 ERROR HY000: Table has no partition for value 0
SET SESSION debug_dbug=@save_dbug; SET SESSION debug_dbug=@saved_dbug;
SELECT * FROM t1 WHERE b = "Seven"; SELECT * FROM t1 WHERE b = "Seven";
a b a b
7 Seven 7 Seven
......
mysql-test/suite/parts/t/partition_debug.test
View file @ 451573fa
...@@ -18,11 +18,11 @@ CREATE TABLE t1 (a INT, b VARCHAR(64), KEY(b,a)) ...@@ -18,11 +18,11 @@ CREATE TABLE t1 (a INT, b VARCHAR(64), KEY(b,a))
PARTITION BY HASH (a) PARTITIONS 3; PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (1, "1"), (2, "2"), (3, "3"), (4, "Four"), (5, "Five"), INSERT INTO t1 VALUES (1, "1"), (2, "2"), (3, "3"), (4, "Four"), (5, "Five"),
(6, "Six"), (7, "Seven"), (8, "Eight"), (9, "Nine"); (6, "Six"), (7, "Seven"), (8, "Eight"), (9, "Nine");
SET @save_dbug=@@debug_dbug; SET @saved_dbug=@@debug_dbug;
SET SESSION debug_dbug="+d,ha_partition_fail_index_init"; SET SESSION debug_dbug="+d,ha_partition_fail_index_init";
--error ER_NO_PARTITION_FOR_GIVEN_VALUE --error ER_NO_PARTITION_FOR_GIVEN_VALUE
SELECT * FROM t1 WHERE b = "Seven"; SELECT * FROM t1 WHERE b = "Seven";
SET SESSION debug_dbug=@save_dbug; SET SESSION debug_dbug=@saved_dbug;
SELECT * FROM t1 WHERE b = "Seven"; SELECT * FROM t1 WHERE b = "Seven";
DROP TABLE t1; DROP TABLE t1;
......
mysql-test/suite/parts/t/partition_debug_innodb.test
View file @ 451573fa
...@@ -30,7 +30,7 @@ INSERT INTO t1 VALUES (6, 'X 6 row'), (7, 'Seventh row'), (8, 'Last row'); ...@@ -30,7 +30,7 @@ INSERT INTO t1 VALUES (6, 'X 6 row'), (7, 'Seventh row'), (8, 'Last row');
ALTER TABLE t1 ADD INDEX new_b_index (b); ALTER TABLE t1 ADD INDEX new_b_index (b);
ALTER TABLE t1 DROP INDEX new_b_index; ALTER TABLE t1 DROP INDEX new_b_index;
SET @save_dbug=@@debug_dbug; SET @saved_dbug=@@debug_dbug;
SET SESSION debug_dbug = "+d,ha_partition_fail_final_add_index"; SET SESSION debug_dbug = "+d,ha_partition_fail_final_add_index";
--error ER_NO_PARTITION_FOR_GIVEN_VALUE --error ER_NO_PARTITION_FOR_GIVEN_VALUE
...@@ -46,7 +46,7 @@ SHOW CREATE TABLE t1; ...@@ -46,7 +46,7 @@ SHOW CREATE TABLE t1;
--sorted_result --sorted_result
SELECT * FROM t1; SELECT * FROM t1;
SET SESSION debug_dbug = @save_dbug; SET SESSION debug_dbug = @saved_dbug;
SHOW CREATE TABLE t1; SHOW CREATE TABLE t1;
DROP TABLE t1; DROP TABLE t1;
} }
......
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_again_allow.result
View file @ 451573fa
...@@ -22,6 +22,7 @@ current_user() ...@@ -22,6 +22,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,; connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set ...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'192.0.2.4'; revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_again_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_bad_allow.result
View file @ 451573fa
...@@ -22,6 +22,7 @@ current_user() ...@@ -22,6 +22,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,; connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set ...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'192.0.2.4'; revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_bad_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_good_allow.result
View file @ 451573fa
...@@ -22,6 +22,7 @@ current_user() ...@@ -22,6 +22,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,; connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN null ...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN null
LAST_ERROR_SEEN null LAST_ERROR_SEEN null
revoke select on test.* from 'root'@'santa.claus.ipv4.example.com'; revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'santa.claus.ipv4.example.com'; drop user 'root'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_good_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
ERROR HY000: Host 'santa.claus.ipv4.example.com' is not allowed to connect to this MariaDB server ERROR HY000: Host 'santa.claus.ipv4.example.com' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_noname_allow.result
View file @ 451573fa
...@@ -24,6 +24,7 @@ current_user() ...@@ -24,6 +24,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,; connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -103,4 +104,4 @@ revoke select on test.* from 'root'@'santa.claus.ipv4.example.com'; ...@@ -103,4 +104,4 @@ revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
revoke select on test.* from 'root'@'192.0.2.4'; revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'santa.claus.ipv4.example.com'; drop user 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_addrinfo_noname_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_auth_plugin.result
View file @ 451573fa
...@@ -24,6 +24,7 @@ current_user() ...@@ -24,6 +24,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
uninstall plugin test_plugin_server; uninstall plugin test_plugin_server;
ERROR HY000: Plugin 'test_plugin_server' is not loaded ERROR HY000: Plugin 'test_plugin_server' is not loaded
...@@ -194,5 +195,5 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv4.example.com' ...@@ -194,5 +195,5 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv4.example.com'
FROM 'plug'@'santa.claus.ipv4.example.com'; FROM 'plug'@'santa.claus.ipv4.example.com';
DROP USER 'plug'@'santa.claus.ipv4.example.com'; DROP USER 'plug'@'santa.claus.ipv4.example.com';
DROP USER 'plug_dest'@'santa.claus.ipv4.example.com'; DROP USER 'plug_dest'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
delete from mysql.plugin where name='test_plugin_server'; delete from mysql.plugin where name='test_plugin_server';
mysql-test/suite/perfschema/r/hostcache_ipv4_blocked.result
View file @ 451573fa
...@@ -25,6 +25,7 @@ current_user() ...@@ -25,6 +25,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4,native_password_bad_reply"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4,native_password_bad_reply";
ERROR 08S01: Bad handshake ERROR 08S01: Bad handshake
connection default; connection default;
...@@ -427,4 +428,4 @@ drop user 'root'@'santa.claus.ipv4.example.com'; ...@@ -427,4 +428,4 @@ drop user 'root'@'santa.claus.ipv4.example.com';
revoke select on test.* from 'quota'@'santa.claus.ipv4.example.com'; revoke select on test.* from 'quota'@'santa.claus.ipv4.example.com';
drop user 'quota'@'santa.claus.ipv4.example.com'; drop user 'quota'@'santa.claus.ipv4.example.com';
set global max_connect_errors = @saved_max_connect_errors; set global max_connect_errors = @saved_max_connect_errors;
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_format.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_format_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_format_ipv4";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_max_con.result
View file @ 451573fa
...@@ -25,6 +25,7 @@ current_user() ...@@ -25,6 +25,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
connect con2a,"127.0.0.1",quota,,test,$MASTER_MYPORT,; connect con2a,"127.0.0.1",quota,,test,$MASTER_MYPORT,;
select "Con2a is alive"; select "Con2a is alive";
...@@ -702,4 +703,4 @@ disconnect tmp_con7; ...@@ -702,4 +703,4 @@ disconnect tmp_con7;
set global max_connections = @saved_max_connections; set global max_connections = @saved_max_connections;
set global max_user_connections = @saved_max_user_connections; set global max_user_connections = @saved_max_user_connections;
drop user 'quota'@'santa.claus.ipv4.example.com'; drop user 'quota'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_nameinfo_again_allow.result
View file @ 451573fa
...@@ -24,6 +24,7 @@ current_user() ...@@ -24,6 +24,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,; connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -178,4 +179,4 @@ revoke select on test.* from 'root'@'192.0.2.4'; ...@@ -178,4 +179,4 @@ revoke select on test.* from 'root'@'192.0.2.4';
revoke select on test.* from 'root'@'santa.claus.ipv4.example.com'; revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
drop user 'root'@'santa.claus.ipv4.example.com'; drop user 'root'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_nameinfo_again_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -142,4 +143,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -142,4 +143,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_nameinfo_noname_allow.result
View file @ 451573fa
...@@ -22,6 +22,7 @@ current_user() ...@@ -22,6 +22,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname";
connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,; connect con2,"127.0.0.1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set ...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'192.0.2.4'; revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_nameinfo_noname_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname";
ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server ERROR HY000: Host '192.0.2.4' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_passwd.result
View file @ 451573fa
...@@ -24,6 +24,7 @@ current_user() ...@@ -24,6 +24,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
ERROR 28000: Access denied for user 'user_without'@'santa.claus.ipv4.example.com' (using password: YES) ERROR 28000: Access denied for user 'user_without'@'santa.claus.ipv4.example.com' (using password: YES)
connection default; connection default;
...@@ -207,4 +208,4 @@ FIRST_ERROR_SEEN set ...@@ -207,4 +208,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
drop user 'user_with'@'santa.claus.ipv4.example.com'; drop user 'user_with'@'santa.claus.ipv4.example.com';
drop user 'user_without'@'santa.claus.ipv4.example.com'; drop user 'user_without'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv4_ssl.result
View file @ 451573fa
...@@ -28,6 +28,7 @@ current_user() ...@@ -28,6 +28,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
ERROR 28000: Access denied for user 'user_ssl'@'santa.claus.ipv4.example.com' (using password: NO) ERROR 28000: Access denied for user 'user_ssl'@'santa.claus.ipv4.example.com' (using password: NO)
connection default; connection default;
...@@ -151,4 +152,4 @@ FIRST_ERROR_SEEN set ...@@ -151,4 +152,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
drop user 'user_ssl'@'santa.claus.ipv4.example.com'; drop user 'user_ssl'@'santa.claus.ipv4.example.com';
drop user 'user_ssl_x509'@'santa.claus.ipv4.example.com'; drop user 'user_ssl_x509'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_again_allow.result
View file @ 451573fa
...@@ -22,6 +22,7 @@ current_user() ...@@ -22,6 +22,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again";
connect con2,"::1",root,,test,$MASTER_MYPORT,; connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set ...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'2001:db8::6:6'; revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_again_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_bad_allow.result
View file @ 451573fa
...@@ -22,6 +22,7 @@ current_user() ...@@ -22,6 +22,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6";
connect con2,"::1",root,,test,$MASTER_MYPORT,; connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set ...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'2001:db8::6:6'; revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_bad_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_good_allow.result
View file @ 451573fa
...@@ -22,6 +22,7 @@ current_user() ...@@ -22,6 +22,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
connect con2,"::1",root,,test,$MASTER_MYPORT,; connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN null ...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN null
LAST_ERROR_SEEN null LAST_ERROR_SEEN null
revoke select on test.* from 'root'@'santa.claus.ipv6.example.com'; revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'santa.claus.ipv6.example.com'; drop user 'root'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_good_deny.result
View file @ 451573fa
...@@ -19,6 +19,7 @@ current_user() ...@@ -19,6 +19,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
ERROR HY000: Host 'santa.claus.ipv6.example.com' is not allowed to connect to this MariaDB server ERROR HY000: Host 'santa.claus.ipv6.example.com' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -80,4 +81,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -80,4 +81,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_noname_allow.result
View file @ 451573fa
...@@ -24,6 +24,7 @@ current_user() ...@@ -24,6 +24,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname";
connect con2,"::1",root,,test,$MASTER_MYPORT,; connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -103,4 +104,4 @@ revoke select on test.* from 'root'@'santa.claus.ipv6.example.com'; ...@@ -103,4 +104,4 @@ revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
revoke select on test.* from 'root'@'2001:db8::6:6'; revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'santa.claus.ipv6.example.com'; drop user 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_addrinfo_noname_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_auth_plugin.result
View file @ 451573fa
...@@ -24,6 +24,7 @@ current_user() ...@@ -24,6 +24,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
uninstall plugin test_plugin_server; uninstall plugin test_plugin_server;
ERROR HY000: Plugin 'test_plugin_server' is not loaded ERROR HY000: Plugin 'test_plugin_server' is not loaded
...@@ -194,5 +195,5 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv6.example.com' ...@@ -194,5 +195,5 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv6.example.com'
FROM 'plug'@'santa.claus.ipv6.example.com'; FROM 'plug'@'santa.claus.ipv6.example.com';
DROP USER 'plug'@'santa.claus.ipv6.example.com'; DROP USER 'plug'@'santa.claus.ipv6.example.com';
DROP USER 'plug_dest'@'santa.claus.ipv6.example.com'; DROP USER 'plug_dest'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
delete from mysql.plugin where name='test_plugin_server'; delete from mysql.plugin where name='test_plugin_server';
mysql-test/suite/perfschema/r/hostcache_ipv6_blocked.result
View file @ 451573fa
...@@ -25,6 +25,7 @@ current_user() ...@@ -25,6 +25,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6,native_password_bad_reply"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6,native_password_bad_reply";
ERROR 08S01: Bad handshake ERROR 08S01: Bad handshake
connection default; connection default;
...@@ -427,4 +428,4 @@ drop user 'root'@'santa.claus.ipv6.example.com'; ...@@ -427,4 +428,4 @@ drop user 'root'@'santa.claus.ipv6.example.com';
revoke select on test.* from 'quota'@'santa.claus.ipv6.example.com'; revoke select on test.* from 'quota'@'santa.claus.ipv6.example.com';
drop user 'quota'@'santa.claus.ipv6.example.com'; drop user 'quota'@'santa.claus.ipv6.example.com';
set global max_connect_errors = @saved_max_connect_errors; set global max_connect_errors = @saved_max_connect_errors;
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_max_con.result
View file @ 451573fa
...@@ -25,6 +25,7 @@ current_user() ...@@ -25,6 +25,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
connect con2a,"::1",quota,,test,$MASTER_MYPORT,; connect con2a,"::1",quota,,test,$MASTER_MYPORT,;
select "Con2a is alive"; select "Con2a is alive";
...@@ -702,4 +703,4 @@ disconnect tmp_con7; ...@@ -702,4 +703,4 @@ disconnect tmp_con7;
set global max_connections = @saved_max_connections; set global max_connections = @saved_max_connections;
set global max_user_connections = @saved_max_user_connections; set global max_user_connections = @saved_max_user_connections;
drop user 'quota'@'santa.claus.ipv6.example.com'; drop user 'quota'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_nameinfo_again_allow.result
View file @ 451573fa
...@@ -24,6 +24,7 @@ current_user() ...@@ -24,6 +24,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again";
connect con2,"::1",root,,test,$MASTER_MYPORT,; connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -178,4 +179,4 @@ revoke select on test.* from 'root'@'2001:db8::6:6'; ...@@ -178,4 +179,4 @@ revoke select on test.* from 'root'@'2001:db8::6:6';
revoke select on test.* from 'root'@'santa.claus.ipv6.example.com'; revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
drop user 'root'@'santa.claus.ipv6.example.com'; drop user 'root'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_nameinfo_again_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -142,4 +143,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -142,4 +143,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_nameinfo_noname_allow.result
View file @ 451573fa
...@@ -22,6 +22,7 @@ current_user() ...@@ -22,6 +22,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname";
connect con2,"::1",root,,test,$MASTER_MYPORT,; connect con2,"::1",root,,test,$MASTER_MYPORT,;
select "Con2 is alive"; select "Con2 is alive";
...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set ...@@ -99,4 +100,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
revoke select on test.* from 'root'@'2001:db8::6:6'; revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_nameinfo_noname_deny.result
View file @ 451573fa
...@@ -20,6 +20,7 @@ current_user() ...@@ -20,6 +20,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname";
ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server ERROR HY000: Host '2001:db8::6:6' is not allowed to connect to this MariaDB server
connection default; connection default;
...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0 ...@@ -81,4 +82,4 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0 COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_passwd.result
View file @ 451573fa
...@@ -24,6 +24,7 @@ current_user() ...@@ -24,6 +24,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
ERROR 28000: Access denied for user 'user_without'@'santa.claus.ipv6.example.com' (using password: YES) ERROR 28000: Access denied for user 'user_without'@'santa.claus.ipv6.example.com' (using password: YES)
connection default; connection default;
...@@ -207,4 +208,4 @@ FIRST_ERROR_SEEN set ...@@ -207,4 +208,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
drop user 'user_with'@'santa.claus.ipv6.example.com'; drop user 'user_with'@'santa.claus.ipv6.example.com';
drop user 'user_without'@'santa.claus.ipv6.example.com'; drop user 'user_without'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_ipv6_ssl.result
View file @ 451573fa
...@@ -28,6 +28,7 @@ current_user() ...@@ -28,6 +28,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
ERROR 28000: Access denied for user 'user_ssl'@'santa.claus.ipv6.example.com' (using password: NO) ERROR 28000: Access denied for user 'user_ssl'@'santa.claus.ipv6.example.com' (using password: NO)
connection default; connection default;
...@@ -151,4 +152,4 @@ FIRST_ERROR_SEEN set ...@@ -151,4 +152,4 @@ FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set LAST_ERROR_SEEN set
drop user 'user_ssl'@'santa.claus.ipv6.example.com'; drop user 'user_ssl'@'santa.claus.ipv6.example.com';
drop user 'user_ssl_x509'@'santa.claus.ipv6.example.com'; drop user 'user_ssl_x509'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/r/hostcache_peer_addr.result
View file @ 451573fa
...@@ -27,6 +27,7 @@ current_user() ...@@ -27,6 +27,7 @@ current_user()
root@localhost root@localhost
disconnect con1; disconnect con1;
connection default; connection default;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_error"; set global debug_dbug= "+d,vio_peer_addr_error";
ERROR HY000: Can't get hostname for your address ERROR HY000: Can't get hostname for your address
connection default; connection default;
...@@ -50,7 +51,7 @@ Connection_errors_peer_address 2 ...@@ -50,7 +51,7 @@ Connection_errors_peer_address 2
Connection_errors_select 0 Connection_errors_select 0
Connection_errors_tcpwrap 0 Connection_errors_tcpwrap 0
"Dumping performance_schema.host_cache" "Dumping performance_schema.host_cache"
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
flush status; flush status;
show global status like "connection_errors_%"; show global status like "connection_errors_%";
Variable_name Value Variable_name Value
......
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_again_allow.test
View file @ 451573fa
...@@ -27,6 +27,7 @@ select current_user(); ...@@ -27,6 +27,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,); connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
...@@ -48,5 +49,5 @@ disconnect con3; ...@@ -48,5 +49,5 @@ disconnect con3;
revoke select on test.* from 'root'@'192.0.2.4'; revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_again_deny.test
View file @ 451573fa
...@@ -25,6 +25,7 @@ select current_user(); ...@@ -25,6 +25,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_again";
--disable_query_log --disable_query_log
...@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,); ...@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_bad_allow.test
View file @ 451573fa
...@@ -30,6 +30,7 @@ select current_user(); ...@@ -30,6 +30,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,); connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
...@@ -51,5 +52,5 @@ disconnect con3; ...@@ -51,5 +52,5 @@ disconnect con3;
revoke select on test.* from 'root'@'192.0.2.4'; revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_bad_deny.test
View file @ 451573fa
...@@ -27,6 +27,7 @@ select current_user(); ...@@ -27,6 +27,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_bad_ipv4";
--disable_query_log --disable_query_log
...@@ -45,5 +46,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,); ...@@ -45,5 +46,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_good_allow.test
View file @ 451573fa
...@@ -28,6 +28,7 @@ select current_user(); ...@@ -28,6 +28,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,); connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
...@@ -49,5 +50,5 @@ disconnect con3; ...@@ -49,5 +50,5 @@ disconnect con3;
revoke select on test.* from 'root'@'santa.claus.ipv4.example.com'; revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'santa.claus.ipv4.example.com'; drop user 'root'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_good_deny.test
View file @ 451573fa
...@@ -25,6 +25,7 @@ select current_user(); ...@@ -25,6 +25,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
--disable_query_log --disable_query_log
...@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,); ...@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_noname_allow.test
View file @ 451573fa
...@@ -30,6 +30,7 @@ select current_user(); ...@@ -30,6 +30,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,); connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
...@@ -53,5 +54,5 @@ revoke select on test.* from 'root'@'192.0.2.4'; ...@@ -53,5 +54,5 @@ revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'santa.claus.ipv4.example.com'; drop user 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_addrinfo_noname_deny.test
View file @ 451573fa
...@@ -25,6 +25,7 @@ select current_user(); ...@@ -25,6 +25,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_error_noname";
--disable_query_log --disable_query_log
...@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,); ...@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_auth_plugin.test
View file @ 451573fa
...@@ -30,6 +30,7 @@ select current_user(); ...@@ -30,6 +30,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
uninstall plugin test_plugin_server; uninstall plugin test_plugin_server;
...@@ -86,6 +87,6 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv4.example.com' ...@@ -86,6 +87,6 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv4.example.com'
DROP USER 'plug'@'santa.claus.ipv4.example.com'; DROP USER 'plug'@'santa.claus.ipv4.example.com';
DROP USER 'plug_dest'@'santa.claus.ipv4.example.com'; DROP USER 'plug_dest'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
delete from mysql.plugin where name='test_plugin_server'; delete from mysql.plugin where name='test_plugin_server';
mysql-test/suite/perfschema/t/hostcache_ipv4_blocked.test
View file @ 451573fa
...@@ -33,6 +33,7 @@ select current_user(); ...@@ -33,6 +33,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4,native_password_bad_reply"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4,native_password_bad_reply";
--disable_query_log --disable_query_log
...@@ -156,5 +157,5 @@ revoke select on test.* from 'quota'@'santa.claus.ipv4.example.com'; ...@@ -156,5 +157,5 @@ revoke select on test.* from 'quota'@'santa.claus.ipv4.example.com';
drop user 'quota'@'santa.claus.ipv4.example.com'; drop user 'quota'@'santa.claus.ipv4.example.com';
set global max_connect_errors = @saved_max_connect_errors; set global max_connect_errors = @saved_max_connect_errors;
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_format.test
View file @ 451573fa
...@@ -24,6 +24,7 @@ select current_user(); ...@@ -24,6 +24,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_format_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_format_ipv4";
--disable_query_log --disable_query_log
...@@ -42,5 +43,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,); ...@@ -42,5 +43,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_max_con.test
View file @ 451573fa
...@@ -31,6 +31,7 @@ select current_user(); ...@@ -31,6 +31,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
connect (con2a,"127.0.0.1",quota,,test,$MASTER_MYPORT,); connect (con2a,"127.0.0.1",quota,,test,$MASTER_MYPORT,);
...@@ -259,5 +260,5 @@ set global max_user_connections = @saved_max_user_connections; ...@@ -259,5 +260,5 @@ set global max_user_connections = @saved_max_user_connections;
# revoke all privileges on test.* from 'quota'@'santa.claus.ipv4.example.com'; # revoke all privileges on test.* from 'quota'@'santa.claus.ipv4.example.com';
drop user 'quota'@'santa.claus.ipv4.example.com'; drop user 'quota'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_nameinfo_again_allow.test
View file @ 451573fa
...@@ -30,6 +30,7 @@ select current_user(); ...@@ -30,6 +30,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,); connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
...@@ -71,5 +72,5 @@ revoke select on test.* from 'root'@'santa.claus.ipv4.example.com'; ...@@ -71,5 +72,5 @@ revoke select on test.* from 'root'@'santa.claus.ipv4.example.com';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
drop user 'root'@'santa.claus.ipv4.example.com'; drop user 'root'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_nameinfo_again_deny.test
View file @ 451573fa
...@@ -25,6 +25,7 @@ select current_user(); ...@@ -25,6 +25,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_again";
--disable_query_log --disable_query_log
...@@ -61,5 +62,5 @@ connect (con5,"127.0.0.1",root,,test,$MASTER_MYPORT,); ...@@ -61,5 +62,5 @@ connect (con5,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_nameinfo_noname_allow.test
View file @ 451573fa
...@@ -28,6 +28,7 @@ select current_user(); ...@@ -28,6 +28,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname";
connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,); connect (con2,"127.0.0.1",root,,test,$MASTER_MYPORT,);
...@@ -49,5 +50,5 @@ disconnect con3; ...@@ -49,5 +50,5 @@ disconnect con3;
revoke select on test.* from 'root'@'192.0.2.4'; revoke select on test.* from 'root'@'192.0.2.4';
drop user 'root'@'192.0.2.4'; drop user 'root'@'192.0.2.4';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_nameinfo_noname_deny.test
View file @ 451573fa
...@@ -25,6 +25,7 @@ select current_user(); ...@@ -25,6 +25,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_error_noname";
--disable_query_log --disable_query_log
...@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,); ...@@ -43,5 +44,5 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_passwd.test
View file @ 451573fa
...@@ -29,6 +29,7 @@ select current_user(); ...@@ -29,6 +29,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
--disable_query_log --disable_query_log
...@@ -82,5 +83,5 @@ connect (con2f,"127.0.0.1",user_with,wrong_password,test,$MASTER_MYPORT,); ...@@ -82,5 +83,5 @@ connect (con2f,"127.0.0.1",user_with,wrong_password,test,$MASTER_MYPORT,);
drop user 'user_with'@'santa.claus.ipv4.example.com'; drop user 'user_with'@'santa.claus.ipv4.example.com';
drop user 'user_without'@'santa.claus.ipv4.example.com'; drop user 'user_without'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv4_ssl.test
View file @ 451573fa
...@@ -30,6 +30,7 @@ select current_user(); ...@@ -30,6 +30,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv4,getnameinfo_fake_ipv4,getaddrinfo_fake_good_ipv4";
--disable_query_log --disable_query_log
...@@ -67,5 +68,5 @@ connect (con2d,"127.0.0.1",user_ssl_x509,good_password,test,$MASTER_MYPORT,,SSL) ...@@ -67,5 +68,5 @@ connect (con2d,"127.0.0.1",user_ssl_x509,good_password,test,$MASTER_MYPORT,,SSL)
drop user 'user_ssl'@'santa.claus.ipv4.example.com'; drop user 'user_ssl'@'santa.claus.ipv4.example.com';
drop user 'user_ssl_x509'@'santa.claus.ipv4.example.com'; drop user 'user_ssl_x509'@'santa.claus.ipv4.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_again_allow.test
View file @ 451573fa
...@@ -29,6 +29,7 @@ select current_user(); ...@@ -29,6 +29,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again";
connect (con2,"::1",root,,test,$MASTER_MYPORT,); connect (con2,"::1",root,,test,$MASTER_MYPORT,);
...@@ -50,5 +51,5 @@ disconnect con3; ...@@ -50,5 +51,5 @@ disconnect con3;
revoke select on test.* from 'root'@'2001:db8::6:6'; revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_again_deny.test
View file @ 451573fa
...@@ -26,6 +26,7 @@ select current_user(); ...@@ -26,6 +26,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_again";
--disable_query_log --disable_query_log
...@@ -44,5 +45,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,); ...@@ -44,5 +45,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_bad_allow.test
View file @ 451573fa
...@@ -31,6 +31,7 @@ select current_user(); ...@@ -31,6 +31,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6";
connect (con2,"::1",root,,test,$MASTER_MYPORT,); connect (con2,"::1",root,,test,$MASTER_MYPORT,);
...@@ -52,5 +53,5 @@ disconnect con3; ...@@ -52,5 +53,5 @@ disconnect con3;
revoke select on test.* from 'root'@'2001:db8::6:6'; revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_bad_deny.test
View file @ 451573fa
...@@ -28,6 +28,7 @@ select current_user(); ...@@ -28,6 +28,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_bad_ipv6";
--disable_query_log --disable_query_log
...@@ -46,5 +47,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,); ...@@ -46,5 +47,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_good_allow.test
View file @ 451573fa
...@@ -29,6 +29,7 @@ select current_user(); ...@@ -29,6 +29,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
connect (con2,"::1",root,,test,$MASTER_MYPORT,); connect (con2,"::1",root,,test,$MASTER_MYPORT,);
...@@ -50,5 +51,5 @@ disconnect con3; ...@@ -50,5 +51,5 @@ disconnect con3;
revoke select on test.* from 'root'@'santa.claus.ipv6.example.com'; revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'santa.claus.ipv6.example.com'; drop user 'root'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_good_deny.test
View file @ 451573fa
...@@ -22,6 +22,7 @@ select current_user(); ...@@ -22,6 +22,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
--disable_query_log --disable_query_log
...@@ -40,5 +41,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,); ...@@ -40,5 +41,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_noname_allow.test
View file @ 451573fa
...@@ -31,6 +31,7 @@ select current_user(); ...@@ -31,6 +31,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname";
connect (con2,"::1",root,,test,$MASTER_MYPORT,); connect (con2,"::1",root,,test,$MASTER_MYPORT,);
...@@ -54,5 +55,4 @@ revoke select on test.* from 'root'@'2001:db8::6:6'; ...@@ -54,5 +55,4 @@ revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'santa.claus.ipv6.example.com'; drop user 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_addrinfo_noname_deny.test
View file @ 451573fa
...@@ -26,6 +26,7 @@ select current_user(); ...@@ -26,6 +26,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_error_noname";
--disable_query_log --disable_query_log
...@@ -44,5 +45,4 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,); ...@@ -44,5 +45,4 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_auth_plugin.test
View file @ 451573fa
...@@ -31,6 +31,7 @@ select current_user(); ...@@ -31,6 +31,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
uninstall plugin test_plugin_server; uninstall plugin test_plugin_server;
...@@ -87,6 +88,6 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv6.example.com' ...@@ -87,6 +88,6 @@ REVOKE PROXY ON 'plug_dest'@'santa.claus.ipv6.example.com'
DROP USER 'plug'@'santa.claus.ipv6.example.com'; DROP USER 'plug'@'santa.claus.ipv6.example.com';
DROP USER 'plug_dest'@'santa.claus.ipv6.example.com'; DROP USER 'plug_dest'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
delete from mysql.plugin where name='test_plugin_server'; delete from mysql.plugin where name='test_plugin_server';
mysql-test/suite/perfschema/t/hostcache_ipv6_blocked.test
View file @ 451573fa
...@@ -33,6 +33,7 @@ select current_user(); ...@@ -33,6 +33,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6,native_password_bad_reply"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6,native_password_bad_reply";
--disable_query_log --disable_query_log
...@@ -156,5 +157,5 @@ revoke select on test.* from 'quota'@'santa.claus.ipv6.example.com'; ...@@ -156,5 +157,5 @@ revoke select on test.* from 'quota'@'santa.claus.ipv6.example.com';
drop user 'quota'@'santa.claus.ipv6.example.com'; drop user 'quota'@'santa.claus.ipv6.example.com';
set global max_connect_errors = @saved_max_connect_errors; set global max_connect_errors = @saved_max_connect_errors;
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_max_con.test
View file @ 451573fa
...@@ -32,6 +32,7 @@ select current_user(); ...@@ -32,6 +32,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
connect (con2a,"::1",quota,,test,$MASTER_MYPORT,); connect (con2a,"::1",quota,,test,$MASTER_MYPORT,);
...@@ -241,5 +242,5 @@ set global max_user_connections = @saved_max_user_connections; ...@@ -241,5 +242,5 @@ set global max_user_connections = @saved_max_user_connections;
# revoke all privileges on test.* from 'quota'@'santa.claus.ipv6.example.com'; # revoke all privileges on test.* from 'quota'@'santa.claus.ipv6.example.com';
drop user 'quota'@'santa.claus.ipv6.example.com'; drop user 'quota'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_nameinfo_again_allow.test
View file @ 451573fa
...@@ -31,6 +31,7 @@ select current_user(); ...@@ -31,6 +31,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again";
connect (con2,"::1",root,,test,$MASTER_MYPORT,); connect (con2,"::1",root,,test,$MASTER_MYPORT,);
...@@ -72,5 +73,5 @@ revoke select on test.* from 'root'@'santa.claus.ipv6.example.com'; ...@@ -72,5 +73,5 @@ revoke select on test.* from 'root'@'santa.claus.ipv6.example.com';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
drop user 'root'@'santa.claus.ipv6.example.com'; drop user 'root'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_nameinfo_again_deny.test
View file @ 451573fa
...@@ -26,6 +26,7 @@ select current_user(); ...@@ -26,6 +26,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_again";
--disable_query_log --disable_query_log
...@@ -62,5 +63,5 @@ connect (con5,"::1",root,,test,$MASTER_MYPORT,); ...@@ -62,5 +63,5 @@ connect (con5,"::1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_nameinfo_noname_allow.test
View file @ 451573fa
...@@ -29,6 +29,7 @@ select current_user(); ...@@ -29,6 +29,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname";
connect (con2,"::1",root,,test,$MASTER_MYPORT,); connect (con2,"::1",root,,test,$MASTER_MYPORT,);
...@@ -50,5 +51,5 @@ disconnect con3; ...@@ -50,5 +51,5 @@ disconnect con3;
revoke select on test.* from 'root'@'2001:db8::6:6'; revoke select on test.* from 'root'@'2001:db8::6:6';
drop user 'root'@'2001:db8::6:6'; drop user 'root'@'2001:db8::6:6';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_nameinfo_noname_deny.test
View file @ 451573fa
...@@ -26,6 +26,7 @@ select current_user(); ...@@ -26,6 +26,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_error_noname";
--disable_query_log --disable_query_log
...@@ -44,5 +45,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,); ...@@ -44,5 +45,5 @@ connect (con3,"::1",root,,test,$MASTER_MYPORT,);
--connection default --connection default
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_passwd.test
View file @ 451573fa
...@@ -27,6 +27,7 @@ select current_user(); ...@@ -27,6 +27,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
--disable_query_log --disable_query_log
...@@ -80,5 +81,5 @@ connect (con2f,"::1",user_with,wrong_password,test,$MASTER_MYPORT,); ...@@ -80,5 +81,5 @@ connect (con2f,"::1",user_with,wrong_password,test,$MASTER_MYPORT,);
drop user 'user_with'@'santa.claus.ipv6.example.com'; drop user 'user_with'@'santa.claus.ipv6.example.com';
drop user 'user_without'@'santa.claus.ipv6.example.com'; drop user 'user_without'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_ipv6_ssl.test
View file @ 451573fa
...@@ -31,6 +31,7 @@ select current_user(); ...@@ -31,6 +31,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6"; set global debug_dbug= "+d,vio_peer_addr_fake_ipv6,getnameinfo_fake_ipv6,getaddrinfo_fake_good_ipv6";
--disable_query_log --disable_query_log
...@@ -68,5 +69,5 @@ connect (con2d,"::1",user_ssl_x509,good_password,test,$MASTER_MYPORT,,SSL); ...@@ -68,5 +69,5 @@ connect (con2d,"::1",user_ssl_x509,good_password,test,$MASTER_MYPORT,,SSL);
drop user 'user_ssl'@'santa.claus.ipv6.example.com'; drop user 'user_ssl'@'santa.claus.ipv6.example.com';
drop user 'user_ssl_x509'@'santa.claus.ipv6.example.com'; drop user 'user_ssl_x509'@'santa.claus.ipv6.example.com';
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
mysql-test/suite/perfschema/t/hostcache_peer_addr.test
View file @ 451573fa
...@@ -22,6 +22,7 @@ select current_user(); ...@@ -22,6 +22,7 @@ select current_user();
disconnect con1; disconnect con1;
--connection default --connection default
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= "+d,vio_peer_addr_error"; set global debug_dbug= "+d,vio_peer_addr_error";
--disable_query_log --disable_query_log
...@@ -42,7 +43,7 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,); ...@@ -42,7 +43,7 @@ connect (con3,"127.0.0.1",root,,test,$MASTER_MYPORT,);
show global status like "connection_errors_%"; show global status like "connection_errors_%";
--source ../include/hostcache_dump.inc --source ../include/hostcache_dump.inc
set global debug_dbug= default; set @@global.debug_dbug = @saved_dbug;
flush status; flush status;
show global status like "connection_errors_%"; show global status like "connection_errors_%";
......
mysql-test/suite/rpl/r/kill_race_condition.result
View file @ 451573fa
...@@ -4,6 +4,7 @@ connection master; ...@@ -4,6 +4,7 @@ connection master;
create table t1 (a int); create table t1 (a int);
connection slave; connection slave;
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug='d,rows_log_event_before_open_table'; set global debug_dbug='d,rows_log_event_before_open_table';
connection master; connection master;
insert t1 values (1),(2),(3); insert t1 values (1),(2),(3);
...@@ -13,7 +14,7 @@ kill slave_sql_thread; ...@@ -13,7 +14,7 @@ kill slave_sql_thread;
set debug_sync='now SIGNAL go_ahead_sql'; set debug_sync='now SIGNAL go_ahead_sql';
include/wait_for_slave_sql_error.inc [errno=1927] include/wait_for_slave_sql_error.inc [errno=1927]
Last_SQL_Error = Error executing row event: 'Connection was killed' Last_SQL_Error = Error executing row event: 'Connection was killed'
set global debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set debug_sync='RESET'; set debug_sync='RESET';
connection master; connection master;
drop table t1; drop table t1;
......
mysql-test/suite/rpl/r/rpl_bug33931.result
View file @ 451573fa
...@@ -5,10 +5,11 @@ call mtr.add_suppression("Failed during slave I/O thread initialization"); ...@@ -5,10 +5,11 @@ call mtr.add_suppression("Failed during slave I/O thread initialization");
call mtr.add_suppression("Slave SQL.*Failed during slave thread initialization.* 1593"); call mtr.add_suppression("Slave SQL.*Failed during slave thread initialization.* 1593");
include/stop_slave.inc include/stop_slave.inc
reset slave; reset slave;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init"; SET GLOBAL debug_dbug="d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
start slave; start slave;
include/wait_for_slave_sql_error.inc [errno=1593] include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Failed during slave thread initialization' Last_SQL_Error = 'Failed during slave thread initialization'
SET GLOBAL debug_dbug=""; set @@global.debug_dbug = @saved_dbug;
RESET SLAVE; RESET SLAVE;
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_bug41902.result
View file @ 451573fa
...@@ -2,6 +2,7 @@ include/master-slave.inc ...@@ -2,6 +2,7 @@ include/master-slave.inc
[connection master] [connection master]
connection slave; connection slave;
stop slave; stop slave;
set @saved_dbug = @@global.debug_dbug;
SET @@debug_dbug="d,simulate_find_log_pos_error"; SET @@debug_dbug="d,simulate_find_log_pos_error";
reset slave; reset slave;
ERROR HY000: Target log not found in binlog index ERROR HY000: Target log not found in binlog index
...@@ -19,6 +20,7 @@ SET @@debug_dbug=""; ...@@ -19,6 +20,7 @@ SET @@debug_dbug="";
reset slave; reset slave;
change master to master_host='dummy'; change master to master_host='dummy';
connection master; connection master;
set @saved_dbug_m = @@global.debug_dbug;
SET @@debug_dbug="d,simulate_find_log_pos_error"; SET @@debug_dbug="d,simulate_find_log_pos_error";
reset master; reset master;
ERROR HY000: Target log not found in binlog index ERROR HY000: Target log not found in binlog index
...@@ -29,6 +31,7 @@ purge binary logs to 'master-bin.000001'; ...@@ -29,6 +31,7 @@ purge binary logs to 'master-bin.000001';
ERROR HY000: Target log not found in binlog index ERROR HY000: Target log not found in binlog index
SET @@debug_dbug=""; SET @@debug_dbug="";
purge binary logs to 'master-bin.000001'; purge binary logs to 'master-bin.000001';
set @@global.debug_dbug = @saved_dbug;
==== clean up ==== ==== clean up ====
CHANGE MASTER TO MASTER_HOST = '127.0.0.1'; CHANGE MASTER TO MASTER_HOST = '127.0.0.1';
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_checksum.result
View file @ 451573fa
...@@ -76,6 +76,7 @@ connection master; ...@@ -76,6 +76,7 @@ connection master;
set @@global.binlog_checksum = CRC32; set @@global.binlog_checksum = CRC32;
insert into t1 values (1) /* will not be applied on slave due to simulation */; insert into t1 values (1) /* will not be applied on slave due to simulation */;
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_slave_unaware_checksum'; set @@global.debug_dbug='d,simulate_slave_unaware_checksum';
start slave; start slave;
include/wait_for_slave_io_error.inc [errno=1236] include/wait_for_slave_io_error.inc [errno=1236]
...@@ -83,15 +84,16 @@ Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary ...@@ -83,15 +84,16 @@ Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary
select count(*) as zero from t1; select count(*) as zero from t1;
zero zero
0 0
set @@global.debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
connection slave; connection slave;
include/start_slave.inc include/start_slave.inc
connection master; connection master;
set @@global.master_verify_checksum = 1; set @@global.master_verify_checksum = 1;
set @save_dbug = @@session.debug_dbug;
set @@session.debug_dbug='d,simulate_checksum_test_failure'; set @@session.debug_dbug='d,simulate_checksum_test_failure';
show binlog events; show binlog events;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
set @@session.debug_dbug=''; set debug_dbug= @save_dbug;
set @@global.master_verify_checksum = default; set @@global.master_verify_checksum = default;
connection slave; connection slave;
connection slave; connection slave;
...@@ -99,10 +101,11 @@ include/stop_slave.inc ...@@ -99,10 +101,11 @@ include/stop_slave.inc
connection master; connection master;
create table t2 (a int); create table t2 (a int);
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug='d,simulate_checksum_test_failure'; set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave io_thread; start slave io_thread;
include/wait_for_slave_io_error.inc [errno=1595,1913] include/wait_for_slave_io_error.inc [errno=1595,1913]
set @@global.debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
start slave io_thread; start slave io_thread;
include/wait_for_slave_param.inc [Read_Master_Log_Pos] include/wait_for_slave_param.inc [Read_Master_Log_Pos]
set @@global.slave_sql_verify_checksum = 1; set @@global.slave_sql_verify_checksum = 1;
...@@ -110,7 +113,7 @@ set @@global.debug_dbug='d,simulate_checksum_test_failure'; ...@@ -110,7 +113,7 @@ set @@global.debug_dbug='d,simulate_checksum_test_failure';
start slave sql_thread; start slave sql_thread;
include/wait_for_slave_sql_error.inc [errno=1593] include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Error initializing relay log position: I/O error reading event at position 4' Last_SQL_Error = 'Error initializing relay log position: I/O error reading event at position 4'
set @@global.debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
include/start_slave.inc include/start_slave.inc
connection master; connection master;
connection slave; connection slave;
......
mysql-test/suite/rpl/r/rpl_corruption.result
View file @ 451573fa
...@@ -13,6 +13,7 @@ connection master; ...@@ -13,6 +13,7 @@ connection master;
CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY, b VARCHAR(10), c VARCHAR(100)); CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY, b VARCHAR(10), c VARCHAR(100));
include/stop_slave.inc include/stop_slave.inc
# 2. Corruption in master binlog and SHOW BINLOG EVENTS # 2. Corruption in master binlog and SHOW BINLOG EVENTS
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char"; SET GLOBAL debug_dbug="+d,corrupt_read_log_event_char";
SHOW BINLOG EVENTS; SHOW BINLOG EVENTS;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
...@@ -55,9 +56,9 @@ connection slave; ...@@ -55,9 +56,9 @@ connection slave;
include/diff_tables.inc [master:test.t1, slave:test.t1] include/diff_tables.inc [master:test.t1, slave:test.t1]
# 8. Clean up # 8. Clean up
connection master; connection master;
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
SET GLOBAL master_verify_checksum = @old_master_verify_checksum; SET GLOBAL master_verify_checksum = @old_master_verify_checksum;
DROP TABLE t1; DROP TABLE t1;
connection slave; connection slave;
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_heartbeat_debug.result
View file @ 451573fa
...@@ -7,7 +7,7 @@ set @@global.slave_net_timeout= 10; ...@@ -7,7 +7,7 @@ set @@global.slave_net_timeout= 10;
show status like 'Slave_heartbeat_period';; show status like 'Slave_heartbeat_period';;
Variable_name Slave_heartbeat_period Variable_name Slave_heartbeat_period
Value 60.000 Value 60.000
SET @save_dbug= @@GLOBAL.debug_dbug; SET @saved_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,simulate_slave_heartbeat_network_error"; SET GLOBAL debug_dbug="+d,simulate_slave_heartbeat_network_error";
CALL mtr.add_suppression('SET @master_heartbeat_period to master failed with error'); CALL mtr.add_suppression('SET @master_heartbeat_period to master failed with error');
CALL mtr.add_suppression('Master command COM_REGISTER_SLAVE failed: failed registering on master, reconnecting to try again'); CALL mtr.add_suppression('Master command COM_REGISTER_SLAVE failed: failed registering on master, reconnecting to try again');
...@@ -25,7 +25,7 @@ connection master; ...@@ -25,7 +25,7 @@ connection master;
drop table t1; drop table t1;
connection slave; connection slave;
include/stop_slave.inc include/stop_slave.inc
SET GLOBAL debug_dbug=@save_dbug; SET GLOBAL debug_dbug=@saved_dbug;
set @@global.slave_net_timeout= @restore_slave_net_timeout; set @@global.slave_net_timeout= @restore_slave_net_timeout;
include/start_slave.inc include/start_slave.inc
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_incident.result
View file @ 451573fa
...@@ -14,6 +14,7 @@ a ...@@ -14,6 +14,7 @@ a
1 1
2 2
3 3
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*'; SET GLOBAL debug_dbug= '+d,incident_database_resync_on_replace,*';
REPLACE INTO t1 VALUES (4); REPLACE INTO t1 VALUES (4);
SELECT * FROM t1; SELECT * FROM t1;
...@@ -22,6 +23,7 @@ a ...@@ -22,6 +23,7 @@ a
2 2
3 3
4 4
set @@global.debug_dbug = @saved_dbug;
connection slave; connection slave;
call mtr.add_suppression("Slave SQL.*The incident LOST_EVENTS occurred on the master.* 1590"); call mtr.add_suppression("Slave SQL.*The incident LOST_EVENTS occurred on the master.* 1590");
include/wait_for_slave_sql_error.inc [errno=1590] include/wait_for_slave_sql_error.inc [errno=1590]
......
mysql-test/suite/rpl/r/rpl_init_slave_errors.result
View file @ 451573fa
...@@ -4,12 +4,13 @@ connection slave; ...@@ -4,12 +4,13 @@ connection slave;
stop slave; stop slave;
reset slave; reset slave;
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init"; SET GLOBAL debug_dbug= "d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
start slave; start slave;
include/wait_for_slave_sql_error.inc [errno=1593] include/wait_for_slave_sql_error.inc [errno=1593]
Last_SQL_Error = 'Failed during slave thread initialization' Last_SQL_Error = 'Failed during slave thread initialization'
call mtr.add_suppression("Failed during slave.* thread initialization"); call mtr.add_suppression("Failed during slave.* thread initialization");
SET GLOBAL debug_dbug= ""; set @@global.debug_dbug = @saved_dbug;
connection slave; connection slave;
reset slave; reset slave;
SET GLOBAL init_slave= "garbage"; SET GLOBAL init_slave= "garbage";
......
mysql-test/suite/rpl/r/rpl_row_big_table_id.result
View file @ 451573fa
...@@ -2,6 +2,7 @@ include/master-slave.inc ...@@ -2,6 +2,7 @@ include/master-slave.inc
[connection master] [connection master]
connection master; connection master;
include/rpl_restart_server.inc [server_number=1] include/rpl_restart_server.inc [server_number=1]
set @saved_dbug = @@session.debug_dbug;
SET @@debug_dbug="d,simulate_big_table_id"; SET @@debug_dbug="d,simulate_big_table_id";
CREATE TABLE t (a int); CREATE TABLE t (a int);
INSERT INTO t SET a= 0; INSERT INTO t SET a= 0;
...@@ -42,5 +43,6 @@ master-bin.000002 # Query 1 # COMMIT ...@@ -42,5 +43,6 @@ master-bin.000002 # Query 1 # COMMIT
connection slave; connection slave;
connection master; connection master;
DROP TABLE t; DROP TABLE t;
set debug_dbug= @saved_dbug;
connection slave; connection slave;
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_row_find_row_debug.result
View file @ 451573fa
...@@ -2,6 +2,7 @@ include/master-slave.inc ...@@ -2,6 +2,7 @@ include/master-slave.inc
[connection master] [connection master]
connection slave; connection slave;
include/stop_slave.inc include/stop_slave.inc
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL log_warnings = 2; SET GLOBAL log_warnings = 2;
SET GLOBAL debug_dbug="d,inject_long_find_row_note"; SET GLOBAL debug_dbug="d,inject_long_find_row_note";
include/start_slave.inc include/start_slave.inc
...@@ -17,7 +18,7 @@ connection slave; ...@@ -17,7 +18,7 @@ connection slave;
# Check if any note related to long DELETE_ROWS and UPDATE_ROWS appears in the error log # Check if any note related to long DELETE_ROWS and UPDATE_ROWS appears in the error log
Occurrences: update=1, delete=1 Occurrences: update=1, delete=1
include/stop_slave.inc include/stop_slave.inc
SET GLOBAL debug_dbug = ''; set @@global.debug_dbug = @saved_dbug;
SET GLOBAL log_warnings = 2; SET GLOBAL log_warnings = 2;
include/start_slave.inc include/start_slave.inc
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_semi_sync_skip_repl.result
View file @ 451573fa
...@@ -11,6 +11,7 @@ SET @@GLOBAL.rpl_semi_sync_slave_enabled = 1; ...@@ -11,6 +11,7 @@ SET @@GLOBAL.rpl_semi_sync_slave_enabled = 1;
include/start_slave.inc include/start_slave.inc
connection master; connection master;
CREATE TABLE t1 (a INT) ENGINE=innodb; CREATE TABLE t1 (a INT) ENGINE=innodb;
set @saved_dbug = @@global.debug_dbug;
SET @@GLOBAL.debug_dbug="d,dbug_master_binlog_over_2GB"; SET @@GLOBAL.debug_dbug="d,dbug_master_binlog_over_2GB";
SET @@SESSION.skip_replication=1; SET @@SESSION.skip_replication=1;
INSERT INTO t1 SET a=1; INSERT INTO t1 SET a=1;
...@@ -20,7 +21,7 @@ SET @@GLOBAL.debug_dbug=""; ...@@ -20,7 +21,7 @@ SET @@GLOBAL.debug_dbug="";
FLUSH LOGS; FLUSH LOGS;
connection slave; connection slave;
connection master; connection master;
SET @@GLOBAL.debug_dbug=@@GLOBAL.debug_dbug; set @@global.debug_dbug = @saved_dbug;
SET @@GLOBAL.rpl_semi_sync_master_timeout = 10000; SET @@GLOBAL.rpl_semi_sync_master_timeout = 10000;
SET @@GLOBAL.rpl_semi_sync_master_enabled = 0; SET @@GLOBAL.rpl_semi_sync_master_enabled = 0;
connection master; connection master;
......
mysql-test/suite/rpl/r/rpl_show_slave_running.result
View file @ 451573fa
...@@ -3,6 +3,7 @@ include/master-slave.inc ...@@ -3,6 +3,7 @@ include/master-slave.inc
connection slave; connection slave;
SET DEBUG_SYNC= 'RESET'; SET DEBUG_SYNC= 'RESET';
include/stop_slave.inc include/stop_slave.inc
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= 'd,dbug.before_get_running_status_yes'; set global debug_dbug= 'd,dbug.before_get_running_status_yes';
Slave_running, Slave_IO_Running, Slave_SQL_Running, must be OFF, NO, NO in three following queries Slave_running, Slave_IO_Running, Slave_SQL_Running, must be OFF, NO, NO in three following queries
SHOW STATUS LIKE 'Slave_running'; SHOW STATUS LIKE 'Slave_running';
...@@ -34,7 +35,7 @@ Slave_running ON ...@@ -34,7 +35,7 @@ Slave_running ON
Slave_IO_Running= Yes Slave_IO_Running= Yes
Slave_SQL_Running= Yes Slave_SQL_Running= Yes
connection slave; connection slave;
set global debug_dbug= ''; set @@global.debug_dbug = @saved_dbug;
SET DEBUG_SYNC= 'RESET'; SET DEBUG_SYNC= 'RESET';
End of tests End of tests
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_slave_load_remove_tmpfile.result
View file @ 451573fa
include/master-slave.inc include/master-slave.inc
[connection master] [connection master]
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
SET @@global.debug_dbug= '+d,remove_slave_load_file_before_write'; SET @@global.debug_dbug= '+d,remove_slave_load_file_before_write';
connection master; connection master;
create table t1(a int not null auto_increment, b int, primary key(a)) engine=innodb; create table t1(a int not null auto_increment, b int, primary key(a)) engine=innodb;
...@@ -21,5 +22,5 @@ call mtr.add_suppression("Slave: Can't get stat of .*"); ...@@ -21,5 +22,5 @@ call mtr.add_suppression("Slave: Can't get stat of .*");
call mtr.add_suppression("Slave SQL: Error .Can.t get stat of.* error.* 13"); call mtr.add_suppression("Slave SQL: Error .Can.t get stat of.* error.* 13");
call mtr.add_suppression("Slave: File.* not found.*"); call mtr.add_suppression("Slave: File.* not found.*");
call mtr.add_suppression("Slave SQL: Error .File.* not found.* error.* 29"); call mtr.add_suppression("Slave SQL: Error .File.* not found.* error.* 29");
SET @@global.debug_dbug= ''; set @@global.debug_dbug = @saved_dbug;
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_stop_slave.result
View file @ 451573fa
...@@ -15,6 +15,7 @@ include/stop_slave.inc ...@@ -15,6 +15,7 @@ include/stop_slave.inc
# Suspend the INSERT statement in current transaction on SQL thread. # Suspend the INSERT statement in current transaction on SQL thread.
# It guarantees that SQL thread is applying the transaction when # It guarantees that SQL thread is applying the transaction when
# STOP SLAVE command launchs. # STOP SLAVE command launchs.
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,after_mysql_insert,*'; SET GLOBAL debug_dbug= '+d,after_mysql_insert,*';
include/start_slave.inc include/start_slave.inc
...@@ -74,6 +75,7 @@ connection master; ...@@ -74,6 +75,7 @@ connection master;
connection slave; connection slave;
# Test end # Test end
set @@global.debug_dbug = @saved_dbug;
include/restart_slave.inc include/restart_slave.inc
connection slave; connection slave;
call mtr.add_suppression("Slave SQL.*Request to stop slave SQL Thread received while applying a group that has non-transactional changes; waiting for completion of the group"); call mtr.add_suppression("Slave SQL.*Request to stop slave SQL Thread received while applying a group that has non-transactional changes; waiting for completion of the group");
...@@ -98,6 +100,7 @@ connection slave; ...@@ -98,6 +100,7 @@ connection slave;
include/stop_slave.inc include/stop_slave.inc
connection master; connection master;
include/stop_dump_threads.inc include/stop_dump_threads.inc
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,dump_thread_wait_before_send_xid,*'; SET GLOBAL debug_dbug= '+d,dump_thread_wait_before_send_xid,*';
connection slave; connection slave;
include/start_slave.inc include/start_slave.inc
...@@ -120,6 +123,7 @@ connection slave; ...@@ -120,6 +123,7 @@ connection slave;
include/wait_for_slave_to_stop.inc include/wait_for_slave_to_stop.inc
connection slave1; connection slave1;
connection master; connection master;
set @@global.debug_dbug = @saved_dbug;
include/stop_dump_threads.inc include/stop_dump_threads.inc
connection slave1; connection slave1;
include/start_slave.inc include/start_slave.inc
......
mysql-test/suite/rpl/r/rpl_view_debug.result
View file @ 451573fa
...@@ -21,6 +21,7 @@ Tables_in_test ...@@ -21,6 +21,7 @@ Tables_in_test
t1 t1
v1 v1
connection master; connection master;
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug="d,simulate_register_view_failure"; set @@debug_dbug="d,simulate_register_view_failure";
CREATE VIEW v2 as SELECT * FROM t1; CREATE VIEW v2 as SELECT * FROM t1;
ERROR HY000: Out of memory; check if mysqld or some other process uses all available memory; if not, you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space ERROR HY000: Out of memory; check if mysqld or some other process uses all available memory; if not, you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space
...@@ -36,4 +37,5 @@ v1 ...@@ -36,4 +37,5 @@ v1
connection master; connection master;
DROP VIEW IF EXISTS v1; DROP VIEW IF EXISTS v1;
DROP TABLE t1; DROP TABLE t1;
set debug_dbug= @saved_dbug;
include/rpl_end.inc include/rpl_end.inc
mysql-test/suite/rpl/t/kill_race_condition.test
View file @ 451573fa
...@@ -7,6 +7,7 @@ create table t1 (a int); ...@@ -7,6 +7,7 @@ create table t1 (a int);
--sync_slave_with_master --sync_slave_with_master
connection slave; connection slave;
set @saved_dbug = @@global.debug_dbug;
set global debug_dbug='d,rows_log_event_before_open_table'; set global debug_dbug='d,rows_log_event_before_open_table';
connection master; connection master;
...@@ -22,7 +23,7 @@ set debug_sync='now SIGNAL go_ahead_sql'; ...@@ -22,7 +23,7 @@ set debug_sync='now SIGNAL go_ahead_sql';
--source include/wait_for_slave_sql_error.inc --source include/wait_for_slave_sql_error.inc
let $error= query_get_value(SHOW SLAVE STATUS, Last_SQL_Error, 1); let $error= query_get_value(SHOW SLAVE STATUS, Last_SQL_Error, 1);
--echo Last_SQL_Error = $error --echo Last_SQL_Error = $error
set global debug_dbug=''; set @@global.debug_dbug = @saved_dbug;
set debug_sync='RESET'; set debug_sync='RESET';
connection master; connection master;
drop table t1; drop table t1;
......
mysql-test/suite/rpl/t/rpl_bug33931.test
View file @ 451573fa
...@@ -15,6 +15,7 @@ call mtr.add_suppression("Slave SQL.*Failed during slave thread initialization.* ...@@ -15,6 +15,7 @@ call mtr.add_suppression("Slave SQL.*Failed during slave thread initialization.*
reset slave; reset slave;
# Set debug flags on slave to force errors to occur # Set debug flags on slave to force errors to occur
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init"; SET GLOBAL debug_dbug="d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
--disable_query_log --disable_query_log
...@@ -39,7 +40,7 @@ start slave; ...@@ -39,7 +40,7 @@ start slave;
# #
# Cleanup # Cleanup
# #
SET GLOBAL debug_dbug=""; set @@global.debug_dbug = @saved_dbug;
# Clear Last_SQL_Error # Clear Last_SQL_Error
RESET SLAVE; RESET SLAVE;
......
mysql-test/suite/rpl/t/rpl_bug41902.test
View file @ 451573fa
...@@ -15,7 +15,7 @@ source include/master-slave.inc; ...@@ -15,7 +15,7 @@ source include/master-slave.inc;
connection slave; connection slave;
stop slave; stop slave;
set @saved_dbug = @@global.debug_dbug;
SET @@debug_dbug="d,simulate_find_log_pos_error"; SET @@debug_dbug="d,simulate_find_log_pos_error";
--error ER_UNKNOWN_TARGET_BINLOG --error ER_UNKNOWN_TARGET_BINLOG
...@@ -36,6 +36,7 @@ reset slave; ...@@ -36,6 +36,7 @@ reset slave;
change master to master_host='dummy'; change master to master_host='dummy';
connection master; connection master;
set @saved_dbug_m = @@global.debug_dbug;
SET @@debug_dbug="d,simulate_find_log_pos_error"; SET @@debug_dbug="d,simulate_find_log_pos_error";
--error ER_UNKNOWN_TARGET_BINLOG --error ER_UNKNOWN_TARGET_BINLOG
reset master; reset master;
...@@ -53,10 +54,12 @@ purge binary logs to 'master-bin.000001'; ...@@ -53,10 +54,12 @@ purge binary logs to 'master-bin.000001';
--disable_query_log --disable_query_log
call mtr.add_suppression("Failed to locate old binlog or relay log files"); call mtr.add_suppression("Failed to locate old binlog or relay log files");
call mtr.add_suppression("MYSQL_BIN_LOG::purge_logs was called with file ..master-bin.000001 not listed in the index"); call mtr.add_suppression("MYSQL_BIN_LOG::purge_logs was called with file ..master-bin.000001 not listed in the index");
set @@global.debug_dbug = @saved_dbug_m;
connection slave; connection slave;
call mtr.add_suppression("Failed to locate old binlog or relay log files"); call mtr.add_suppression("Failed to locate old binlog or relay log files");
call mtr.add_suppression("MYSQL_BIN_LOG::purge_logs was called with file ..master-bin.000001 not listed in the index"); call mtr.add_suppression("MYSQL_BIN_LOG::purge_logs was called with file ..master-bin.000001 not listed in the index");
--enable_query_log --enable_query_log
set @@global.debug_dbug = @saved_dbug;
--echo ==== clean up ==== --echo ==== clean up ====
CHANGE MASTER TO MASTER_HOST = '127.0.0.1'; CHANGE MASTER TO MASTER_HOST = '127.0.0.1';
......
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
View file @ 451573fa
...@@ -26,7 +26,7 @@ call mtr.add_suppression("Fatal error: The slave I/O thread stops because master ...@@ -26,7 +26,7 @@ call mtr.add_suppression("Fatal error: The slave I/O thread stops because master
call mtr.add_suppression("Slave I/O thread .* register on master"); call mtr.add_suppression("Slave I/O thread .* register on master");
#Test case 1: Try to get the value of the UNIX_TIMESTAMP from master under network disconnection #Test case 1: Try to get the value of the UNIX_TIMESTAMP from master under network disconnection
let $debug_saved= `select @@global.debug`; set @saved_dbug = @@global.debug_dbug;
# set up two parameters to pass into extra/rpl_tests/rpl_get_master_version_and_clock # set up two parameters to pass into extra/rpl_tests/rpl_get_master_version_and_clock
let $dbug_sync_point= 'debug_lock.before_get_UNIX_TIMESTAMP'; let $dbug_sync_point= 'debug_lock.before_get_UNIX_TIMESTAMP';
...@@ -40,11 +40,9 @@ let $dbug_sync_point= 'debug_lock.before_get_SERVER_ID'; ...@@ -40,11 +40,9 @@ let $dbug_sync_point= 'debug_lock.before_get_SERVER_ID';
let $debug_sync_action= 'now SIGNAL signal.get_server_id'; let $debug_sync_action= 'now SIGNAL signal.get_server_id';
source extra/rpl_tests/rpl_get_master_version_and_clock.test; source extra/rpl_tests/rpl_get_master_version_and_clock.test;
eval set global debug_dbug= '$debug_saved';
# cleanup # cleanup
set @@global.debug_dbug = @saved_dbug;
# is not really necessary but avoids mtr post-run env check warnings # is not really necessary but avoids mtr post-run env check warnings
SET DEBUG_SYNC= 'RESET'; SET DEBUG_SYNC= 'RESET';
......
mysql-test/suite/rpl/t/rpl_heartbeat_debug.test
View file @ 451573fa
...@@ -18,7 +18,7 @@ set @@global.slave_net_timeout= 10; ...@@ -18,7 +18,7 @@ set @@global.slave_net_timeout= 10;
# default period slave_net_timeout/2 # default period slave_net_timeout/2
# #
--query_vertical show status like 'Slave_heartbeat_period'; --query_vertical show status like 'Slave_heartbeat_period';
SET @save_dbug= @@GLOBAL.debug_dbug; SET @saved_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,simulate_slave_heartbeat_network_error"; SET GLOBAL debug_dbug="+d,simulate_slave_heartbeat_network_error";
CALL mtr.add_suppression('SET @master_heartbeat_period to master failed with error'); CALL mtr.add_suppression('SET @master_heartbeat_period to master failed with error');
CALL mtr.add_suppression('Master command COM_REGISTER_SLAVE failed: failed registering on master, reconnecting to try again'); CALL mtr.add_suppression('Master command COM_REGISTER_SLAVE failed: failed registering on master, reconnecting to try again');
...@@ -44,7 +44,7 @@ drop table t1; ...@@ -44,7 +44,7 @@ drop table t1;
connection slave; connection slave;
--source include/stop_slave.inc --source include/stop_slave.inc
--disable_warnings --disable_warnings
SET GLOBAL debug_dbug=@save_dbug; SET GLOBAL debug_dbug=@saved_dbug;
set @@global.slave_net_timeout= @restore_slave_net_timeout; set @@global.slave_net_timeout= @restore_slave_net_timeout;
--enable_warnings --enable_warnings
--source include/start_slave.inc --source include/start_slave.inc
......
mysql-test/suite/rpl/t/rpl_row_big_table_id.test
View file @ 451573fa
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
--let $rpl_server_number= 1 --let $rpl_server_number= 1
--source include/rpl_restart_server.inc --source include/rpl_restart_server.inc
set @saved_dbug = @@session.debug_dbug;
SET @@debug_dbug="d,simulate_big_table_id"; SET @@debug_dbug="d,simulate_big_table_id";
CREATE TABLE t (a int); CREATE TABLE t (a int);
...@@ -51,7 +52,7 @@ if (`SELECT sum(a) != 6 FROM t`) ...@@ -51,7 +52,7 @@ if (`SELECT sum(a) != 6 FROM t`)
--connection master --connection master
DROP TABLE t; DROP TABLE t;
set debug_dbug= @saved_dbug;
--sync_slave_with_master --sync_slave_with_master
--source include/rpl_end.inc --source include/rpl_end.inc
mysql-test/suite/rpl/t/rpl_row_find_row_debug.test
View file @ 451573fa
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
# - setup log_warnings and debug # - setup log_warnings and debug
--connection slave --connection slave
--source include/stop_slave.inc --source include/stop_slave.inc
--let $debug_save= `SELECT @@GLOBAL.debug_dbug` set @saved_dbug = @@global.debug_dbug;
--let $log_warnings_save= `SELECT @@GLOBAL.log_warnings` --let $log_warnings_save= `SELECT @@GLOBAL.log_warnings`
SET GLOBAL log_warnings = 2; SET GLOBAL log_warnings = 2;
...@@ -55,7 +55,7 @@ EOF ...@@ -55,7 +55,7 @@ EOF
# cleanup # cleanup
--source include/stop_slave.inc --source include/stop_slave.inc
--eval SET GLOBAL debug_dbug = '$debug_save' set @@global.debug_dbug = @saved_dbug;
--eval SET GLOBAL log_warnings = $log_warnings_save --eval SET GLOBAL log_warnings = $log_warnings_save
--source include/start_slave.inc --source include/start_slave.inc
......
mysql-test/suite/rpl/t/rpl_row_index_choice.test
View file @ 451573fa
...@@ -47,6 +47,7 @@ sync_slave_with_master; ...@@ -47,6 +47,7 @@ sync_slave_with_master;
connection slave; connection slave;
ANALYZE TABLE t2; ANALYZE TABLE t2;
--echo # Slave will crash if using the wrong or no index --echo # Slave will crash if using the wrong or no index
set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug="+d,slave_crash_if_wrong_index,slave_crash_if_table_scan"; SET GLOBAL debug_dbug="+d,slave_crash_if_wrong_index,slave_crash_if_table_scan";
connection master; connection master;
...@@ -238,6 +239,5 @@ connection master; ...@@ -238,6 +239,5 @@ connection master;
DROP TABLE t1; DROP TABLE t1;
sync_slave_with_master; sync_slave_with_master;
connection slave; connection slave;
SET GLOBAL debug_dbug=""; set @@global.debug_dbug = @saved_dbug;
--source include/rpl_end.inc --source include/rpl_end.inc
mysql-test/suite/rpl/t/rpl_semi_sync_skip_repl.test
View file @ 451573fa
...@@ -33,7 +33,7 @@ source include/start_slave.inc; ...@@ -33,7 +33,7 @@ source include/start_slave.inc;
CREATE TABLE t1 (a INT) ENGINE=innodb; CREATE TABLE t1 (a INT) ENGINE=innodb;
# Make the following events as if they offset over 2GB from the beginning of binlog # Make the following events as if they offset over 2GB from the beginning of binlog
--let $sav_debug_dbug=@@GLOBAL.debug_dbug set @saved_dbug = @@global.debug_dbug;
SET @@GLOBAL.debug_dbug="d,dbug_master_binlog_over_2GB"; SET @@GLOBAL.debug_dbug="d,dbug_master_binlog_over_2GB";
SET @@SESSION.skip_replication=1; SET @@SESSION.skip_replication=1;
INSERT INTO t1 SET a=1; INSERT INTO t1 SET a=1;
...@@ -51,7 +51,7 @@ FLUSH LOGS; ...@@ -51,7 +51,7 @@ FLUSH LOGS;
# Clean up # Clean up
# #
--connection master --connection master
--eval SET @@GLOBAL.debug_dbug=$sav_debug_dbug set @@global.debug_dbug = @saved_dbug;
--eval SET @@GLOBAL.rpl_semi_sync_master_timeout = $sav_timeout_master --eval SET @@GLOBAL.rpl_semi_sync_master_timeout = $sav_timeout_master
--eval SET @@GLOBAL.rpl_semi_sync_master_enabled = $sav_enabled_master --eval SET @@GLOBAL.rpl_semi_sync_master_enabled = $sav_enabled_master
......
mysql-test/suite/rpl/t/rpl_show_slave_running.test
View file @ 451573fa
...@@ -11,7 +11,7 @@ connection slave; ...@@ -11,7 +11,7 @@ connection slave;
SET DEBUG_SYNC= 'RESET'; SET DEBUG_SYNC= 'RESET';
source include/stop_slave.inc; source include/stop_slave.inc;
let $debug_saved= `select @@global.debug`; set @saved_dbug = @@global.debug_dbug;
set global debug_dbug= 'd,dbug.before_get_running_status_yes'; # to block due-started IO set global debug_dbug= 'd,dbug.before_get_running_status_yes'; # to block due-started IO
# Test 1. Slave is stopped # Test 1. Slave is stopped
...@@ -77,7 +77,7 @@ echo Slave_SQL_Running= $status; ...@@ -77,7 +77,7 @@ echo Slave_SQL_Running= $status;
connection slave; connection slave;
eval set global debug_dbug= '$debug_saved'; set @@global.debug_dbug = @saved_dbug;
SET DEBUG_SYNC= 'RESET'; SET DEBUG_SYNC= 'RESET';
--echo End of tests --echo End of tests
--source include/rpl_end.inc --source include/rpl_end.inc
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test
View file @ 451573fa
...@@ -29,7 +29,7 @@ ...@@ -29,7 +29,7 @@
########################################################################## ##########################################################################
connection slave; connection slave;
--let $old_debug= `SELECT @@global.debug_dbug` set @saved_dbug = @@global.debug_dbug;
SET @@global.debug_dbug= '+d,remove_slave_load_file_before_write'; SET @@global.debug_dbug= '+d,remove_slave_load_file_before_write';
connection master; connection master;
...@@ -74,7 +74,7 @@ call mtr.add_suppression("Slave: File.* not found.*"); ...@@ -74,7 +74,7 @@ call mtr.add_suppression("Slave: File.* not found.*");
call mtr.add_suppression("Slave SQL: Error .File.* not found.* error.* 29"); call mtr.add_suppression("Slave SQL: Error .File.* not found.* error.* 29");
--let $rpl_only_running_threads= 1 --let $rpl_only_running_threads= 1
eval SET @@global.debug_dbug= '$old_debug'; set @@global.debug_dbug = @saved_dbug;
--source include/rpl_end.inc --source include/rpl_end.inc
mysql-test/suite/rpl/t/rpl_stop_slave.test
View file @ 451573fa
...@@ -22,7 +22,7 @@ source include/stop_slave.inc; ...@@ -22,7 +22,7 @@ source include/stop_slave.inc;
--echo # Suspend the INSERT statement in current transaction on SQL thread. --echo # Suspend the INSERT statement in current transaction on SQL thread.
--echo # It guarantees that SQL thread is applying the transaction when --echo # It guarantees that SQL thread is applying the transaction when
--echo # STOP SLAVE command launchs. --echo # STOP SLAVE command launchs.
let $debug_save= `SELECT @@GLOBAL.debug`; set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,after_mysql_insert,*'; SET GLOBAL debug_dbug= '+d,after_mysql_insert,*';
source include/start_slave.inc; source include/start_slave.inc;
...@@ -44,9 +44,7 @@ source extra/rpl_tests/rpl_stop_slave.test; ...@@ -44,9 +44,7 @@ source extra/rpl_tests/rpl_stop_slave.test;
--echo --echo
--echo # Test end --echo # Test end
--disable_query_log set @@global.debug_dbug = @saved_dbug;
eval SET GLOBAL debug_dbug= '$debug_save';
--enable_query_log
source include/restart_slave_sql.inc; source include/restart_slave_sql.inc;
connection slave; connection slave;
...@@ -79,7 +77,7 @@ connection master; ...@@ -79,7 +77,7 @@ connection master;
# make sure that there are no zombie threads # make sure that there are no zombie threads
--source include/stop_dump_threads.inc --source include/stop_dump_threads.inc
let $debug_save= `SELECT @@GLOBAL.debug`; set @saved_dbug = @@global.debug_dbug;
SET GLOBAL debug_dbug= '+d,dump_thread_wait_before_send_xid,*'; SET GLOBAL debug_dbug= '+d,dump_thread_wait_before_send_xid,*';
connection slave; connection slave;
...@@ -126,9 +124,7 @@ reap; ...@@ -126,9 +124,7 @@ reap;
# sure that we disable the DBUG_EXECUTE_IF # sure that we disable the DBUG_EXECUTE_IF
# that would set the dump thread to wait # that would set the dump thread to wait
connection master; connection master;
--disable_query_log set @@global.debug_dbug = @saved_dbug;
eval SET GLOBAL debug_dbug= '$debug_save';
--enable_query_log
# make sure that there are no zombie threads # make sure that there are no zombie threads
--source include/stop_dump_threads.inc --source include/stop_dump_threads.inc
......
mysql-test/suite/rpl/t/rpl_view_debug.test
View file @ 451573fa
...@@ -18,6 +18,7 @@ sync_slave_with_master; ...@@ -18,6 +18,7 @@ sync_slave_with_master;
# view already has to be on slave # view already has to be on slave
show tables; show tables;
connection master; connection master;
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug="d,simulate_register_view_failure"; set @@debug_dbug="d,simulate_register_view_failure";
--error ER_OUT_OF_RESOURCES --error ER_OUT_OF_RESOURCES
...@@ -30,5 +31,5 @@ show tables; ...@@ -30,5 +31,5 @@ show tables;
connection master; connection master;
DROP VIEW IF EXISTS v1; DROP VIEW IF EXISTS v1;
DROP TABLE t1; DROP TABLE t1;
set debug_dbug= @saved_dbug;
--source include/rpl_end.inc --source include/rpl_end.inc
mysql-test/t/cache_temporal_4265.test
View file @ 451573fa
...@@ -5,9 +5,9 @@ ...@@ -5,9 +5,9 @@
create table t1 (a date); create table t1 (a date);
insert t1 values ('2000-01-02'), ('2001-02-03'), ('2002-03-04'); insert t1 values ('2000-01-02'), ('2001-02-03'), ('2002-03-04');
set debug_dbug='d,str_to_datetime_warn';
select * from t1 where a > date_add('2000-01-01', interval 5 day); SET STATEMENT debug_dbug='d,str_to_datetime_warn' for
set debug_dbug=''; select * from t1 where a > date_add('2000-01-01', interval 5 day);
drop table t1; drop table t1;
# #
......
mysql-test/t/drop_bad_db_type.test
View file @ 451573fa
...@@ -7,7 +7,7 @@ if (!$HA_ARCHIVE_SO) { ...@@ -7,7 +7,7 @@ if (!$HA_ARCHIVE_SO) {
let $mysqld_datadir= `select @@datadir`; let $mysqld_datadir= `select @@datadir`;
SET @save_dbug = @@debug_dbug; SET @saved_dbug = @@debug_dbug;
set debug_dbug='+d,unstable_db_type'; set debug_dbug='+d,unstable_db_type';
install soname 'ha_archive'; install soname 'ha_archive';
...@@ -28,4 +28,4 @@ drop table t1; ...@@ -28,4 +28,4 @@ drop table t1;
--list_files $mysqld_datadir/test --list_files $mysqld_datadir/test
uninstall soname 'ha_archive'; uninstall soname 'ha_archive';
set debug_dbug=@save_dbug; set debug_dbug=@saved_dbug;
mysql-test/t/engine_error_in_alter-8453.test
View file @ 451573fa
...@@ -4,8 +4,9 @@ ...@@ -4,8 +4,9 @@
--source include/have_debug.inc --source include/have_debug.inc
create table t1 (a int, b int); create table t1 (a int, b int);
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,external_lock_failure'; set debug_dbug='+d,external_lock_failure';
--error ER_GET_ERRMSG --error ER_GET_ERRMSG
alter table t1 add column c int; alter table t1 add column c int;
set debug_dbug=''; set debug_dbug= @saved_dbug;
drop table t1; drop table t1;
mysql-test/t/error_simulation.test
View file @ 451573fa
...@@ -21,6 +21,7 @@ set tmp_table_size=1024; ...@@ -21,6 +21,7 @@ set tmp_table_size=1024;
# Set debug flag so an error is returned when # Set debug flag so an error is returned when
# tmp table in query is converted from heap to myisam # tmp table in query is converted from heap to myisam
set @saved_dbug = @@session.debug_dbug;
set session debug_dbug="+d,raise_error"; set session debug_dbug="+d,raise_error";
--error ER_DUP_KEY --error ER_DUP_KEY
...@@ -36,7 +37,7 @@ CREATE TABLE t1 (a INT(100) NOT NULL); ...@@ -36,7 +37,7 @@ CREATE TABLE t1 (a INT(100) NOT NULL);
INSERT INTO t1 VALUES (1), (0), (2); INSERT INTO t1 VALUES (1), (0), (2);
SET SESSION debug_dbug='+d,alter_table_only_index_change'; SET SESSION debug_dbug='+d,alter_table_only_index_change';
ALTER TABLE t1 ADD INDEX a(a); ALTER TABLE t1 ADD INDEX a(a);
SET SESSION debug_dbug=DEFAULT; set debug_dbug= @saved_dbug;
SHOW CREATE TABLE t1; SHOW CREATE TABLE t1;
SELECT * FROM t1; SELECT * FROM t1;
DROP TABLE t1; DROP TABLE t1;
...@@ -51,7 +52,7 @@ SET SESSION debug_dbug="+d,bug42064_simulate_oom"; ...@@ -51,7 +52,7 @@ SET SESSION debug_dbug="+d,bug42064_simulate_oom";
# May fail with either ER_OUT_OF_RESOURCES or EE_OUTOFMEMORY # May fail with either ER_OUT_OF_RESOURCES or EE_OUTOFMEMORY
--error ER_OUT_OF_RESOURCES, 5 --error ER_OUT_OF_RESOURCES, 5
INSERT INTO t1 VALUES(""); INSERT INTO t1 VALUES("");
SET SESSION debug_dbug=DEFAULT; set debug_dbug= @saved_dbug;
DROP TABLE t1; DROP TABLE t1;
...@@ -84,7 +85,7 @@ EXPLAIN ...@@ -84,7 +85,7 @@ EXPLAIN
SELECT * FROM t1 LEFT JOIN t2 ON ( t2.a < 10 OR t2.b < 10 ); SELECT * FROM t1 LEFT JOIN t2 ON ( t2.a < 10 OR t2.b < 10 );
SELECT * FROM t1 LEFT JOIN t2 ON ( t2.a < 10 OR t2.b < 10 ); SELECT * FROM t1 LEFT JOIN t2 ON ( t2.a < 10 OR t2.b < 10 );
SET SESSION debug_dbug= DEFAULT; set debug_dbug= @saved_dbug;
SET optimizer_switch=@save_optimizer_switch; SET optimizer_switch=@save_optimizer_switch;
...@@ -101,7 +102,7 @@ INSERT INTO t2 VALUES (1),(2); ...@@ -101,7 +102,7 @@ INSERT INTO t2 VALUES (1),(2);
SET SESSION debug_dbug="+d,bug11747970_raise_error"; SET SESSION debug_dbug="+d,bug11747970_raise_error";
--error ER_QUERY_INTERRUPTED --error ER_QUERY_INTERRUPTED
INSERT IGNORE INTO t2 SELECT f1 FROM t1 a WHERE NOT EXISTS (SELECT 1 FROM t2 b WHERE a.f1 = b.f1); INSERT IGNORE INTO t2 SELECT f1 FROM t1 a WHERE NOT EXISTS (SELECT 1 FROM t2 b WHERE a.f1 = b.f1);
SET SESSION debug_dbug = DEFAULT; set debug_dbug= @saved_dbug;
DROP TABLE t1,t2; DROP TABLE t1,t2;
...@@ -156,4 +157,4 @@ SET SESSION debug_dbug="+d,simulate_create_virtual_tmp_table_out_of_memory"; ...@@ -156,4 +157,4 @@ SET SESSION debug_dbug="+d,simulate_create_virtual_tmp_table_out_of_memory";
--error ER_OUT_OF_RESOURCES, 5 --error ER_OUT_OF_RESOURCES, 5
SELECT f1(1); SELECT f1(1);
DROP FUNCTION f1; DROP FUNCTION f1;
SET SESSION debug_dbug=DEFAULT; set debug_dbug= @saved_dbug;
mysql-test/t/func_regexp_pcre_debug.test
View file @ 451573fa
--source include/have_debug.inc --source include/have_debug.inc
SET debug_dbug='+d,pcre_exec_error_123'; SET STATEMENT debug_dbug='+d,pcre_exec_error_123' for
SELECT 'a' RLIKE 'a'; SELECT 'a' RLIKE 'a';
SET debug_dbug='';
SELECT 'a' RLIKE 'a'; SELECT 'a' RLIKE 'a';
mysql-test/t/log_slow_debug.test
View file @ 451573fa
...@@ -9,7 +9,7 @@ SET @@GLOBAL.log_output='TABLE'; ...@@ -9,7 +9,7 @@ SET @@GLOBAL.log_output='TABLE';
FLUSH SLOW LOGS; FLUSH SLOW LOGS;
SET @@GLOBAL.slow_query_log=ON; SET @@GLOBAL.slow_query_log=ON;
SET @@GLOBAL.log_slow_admin_statements=ON; SET @@GLOBAL.log_slow_admin_statements=ON;
SET @save_dbug = @@debug_dbug; SET @saved_dbug = @@debug_dbug;
SET SESSION debug_dbug="+d,simulate_slow_query"; SET SESSION debug_dbug="+d,simulate_slow_query";
DELIMITER $$; DELIMITER $$;
...@@ -119,7 +119,7 @@ CALL show_slow_log(); ...@@ -119,7 +119,7 @@ CALL show_slow_log();
--echo # Clean up --echo # Clean up
--echo # --echo #
SET SESSION debug_dbug=@save_dbug; SET SESSION debug_dbug=@saved_dbug;
TRUNCATE mysql.slow_log; TRUNCATE mysql.slow_log;
SET @@global.slow_query_log= @org_slow_query_log; SET @@global.slow_query_log= @org_slow_query_log;
SET @@global.log_output= @org_log_output; SET @@global.log_output= @org_log_output;
......
mysql-test/t/mdev6830.test
View file @ 451573fa
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
# MDEV-6830 Server crashes in best_access_path after a sequence of SELECTs invollving a temptable view # MDEV-6830 Server crashes in best_access_path after a sequence of SELECTs invollving a temptable view
# #
--source include/have_debug.inc --source include/have_debug.inc
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug= 'd,opt'; set @@debug_dbug= 'd,opt';
CREATE TABLE t1 (pk INT PRIMARY KEY) ENGINE=MyISAM; CREATE TABLE t1 (pk INT PRIMARY KEY) ENGINE=MyISAM;
...@@ -60,4 +60,4 @@ SELECT * FROM t1, v3, t4 WHERE v3.f1 = t4.f1 AND t4.f2 = 6 AND t1.pk = v3.f5; ...@@ -60,4 +60,4 @@ SELECT * FROM t1, v3, t4 WHERE v3.f1 = t4.f1 AND t4.f2 = 6 AND t1.pk = v3.f5;
drop table t1,t2,t3,t4; drop table t1,t2,t3,t4;
drop view v2,v3; drop view v2,v3;
set debug_dbug= @saved_dbug;
mysql-test/t/merge-big.test
View file @ 451573fa
...@@ -42,7 +42,7 @@ LOCK TABLE t1 WRITE; ...@@ -42,7 +42,7 @@ LOCK TABLE t1 WRITE;
#SELECT NOW(); #SELECT NOW();
connect (con1,localhost,root,,); connect (con1,localhost,root,,);
let $con1_id= `SELECT CONNECTION_ID()`; let $con1_id= `SELECT CONNECTION_ID()`;
SET @orig_debug=@@debug; SET @orig_debug=@@global.debug_dbug;
SET GLOBAL debug_dbug="+d,sleep_open_and_lock_after_open"; SET GLOBAL debug_dbug="+d,sleep_open_and_lock_after_open";
send INSERT INTO t1 VALUES (1); send INSERT INTO t1 VALUES (1);
connection default; connection default;
......
mysql-test/t/merge_debug.test
View file @ 451573fa
...@@ -14,7 +14,7 @@ call mtr.add_suppression("Index for table .*crashed' is corrupt; try to repair i ...@@ -14,7 +14,7 @@ call mtr.add_suppression("Index for table .*crashed' is corrupt; try to repair i
drop table if exists crashed,t2,t3,t4; drop table if exists crashed,t2,t3,t4;
--enable_warnings --enable_warnings
SET @orig_debug=@@debug; SET @orig_debug=@@global.debug_dbug;
# #
# Check that MariaDB handles reopen that fails without crashing # Check that MariaDB handles reopen that fails without crashing
......
mysql-test/t/range_innodb.test
View file @ 451573fa
...@@ -80,10 +80,11 @@ create table t1 ( ...@@ -80,10 +80,11 @@ create table t1 (
insert into t1 insert into t1
select A.a+10*B.a, A.a+10*B.a, A.a+10*B.a+100*C.a select A.a+10*B.a, A.a+10*B.a, A.a+10*B.a+100*C.a
from t0 A, t0 B, t0 C, t0 D where D.a<5; from t0 A, t0 B, t0 C, t0 D where D.a<5;
set @saved_dbug = @@global.debug_dbug;
set @@global.debug_dbug="+d,ha_index_init_fail"; set @@global.debug_dbug="+d,ha_index_init_fail";
explain select * from t1 where a=10 and b=10; explain select * from t1 where a=10 and b=10;
--error ER_TABLE_DEF_CHANGED --error ER_TABLE_DEF_CHANGED
select * from t1 where a=10 and b=10; select * from t1 where a=10 and b=10;
DROP TABLE t0,t1; DROP TABLE t0,t1;
set @@global.debug_dbug="-d"; set @@global.debug_dbug = @saved_dbug;
set @@optimizer_switch= @optimizer_switch_save; set @@optimizer_switch= @optimizer_switch_save;
mysql-test/t/select_debug.test
View file @ 451573fa
...@@ -10,6 +10,7 @@ create table t2 (a int); ...@@ -10,6 +10,7 @@ create table t2 (a int);
insert into t2 values (2), (3); insert into t2 values (2), (3);
set session join_cache_level=3; set session join_cache_level=3;
set @saved_dbug = @@session.debug_dbug;
set @@debug_dbug= 'd,opt'; set @@debug_dbug= 'd,opt';
explain select t1.b from t1,t2 where t1.b=t2.a; explain select t1.b from t1,t2 where t1.b=t2.a;
...@@ -17,3 +18,4 @@ select t1.b from t1,t2 where t1.b=t2.a; ...@@ -17,3 +18,4 @@ select t1.b from t1,t2 where t1.b=t2.a;
set session join_cache_level=default; set session join_cache_level=default;
drop table t1,t2; drop table t1,t2;
set debug_dbug= @saved_dbug;
mysql-test/t/show_explain_ps.test
View file @ 451573fa
...@@ -38,6 +38,7 @@ let $wait_condition= select State='show_explain_trap' from information_schema.pr ...@@ -38,6 +38,7 @@ let $wait_condition= select State='show_explain_trap' from information_schema.pr
# #
connection con1; connection con1;
set @show_explain_probe_select_id=1; set @show_explain_probe_select_id=1;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='d,show_explain_probe_join_exec_start'; set debug_dbug='d,show_explain_probe_join_exec_start';
send select count(*) from t0 where a < 100000; send select count(*) from t0 where a < 100000;
...@@ -47,7 +48,7 @@ evalp show explain for $thr2; ...@@ -47,7 +48,7 @@ evalp show explain for $thr2;
connection con1; connection con1;
reap; reap;
set debug_dbug=''; set debug_dbug= @saved_dbug;
evalp select event_name evalp select event_name
from from
......
mysql-test/t/slowlog_enospace-10508.test
View file @ 451573fa
...@@ -9,6 +9,7 @@ create table t1 (a int, b int) engine=memory; ...@@ -9,6 +9,7 @@ create table t1 (a int, b int) engine=memory;
insert t1 select seq, seq+1 from seq_1_to_1000; insert t1 select seq, seq+1 from seq_1_to_1000;
set global general_log=0; set global general_log=0;
set global log_queries_not_using_indexes=1; set global log_queries_not_using_indexes=1;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,simulate_file_write_error'; set debug_dbug='+d,simulate_file_write_error';
--disable_result_log --disable_result_log
--let $run= 50 --let $run= 50
...@@ -18,7 +19,7 @@ while ($run) ...@@ -18,7 +19,7 @@ while ($run)
dec $run; dec $run;
} }
--enable_result_log --enable_result_log
set debug_dbug=''; set debug_dbug= @saved_dbug;
set global general_log=1; set global general_log=1;
set global log_queries_not_using_indexes=default; set global log_queries_not_using_indexes=default;
drop table t1; drop table t1;
mysql-test/t/stat_tables-enospc.test
View file @ 451573fa
...@@ -16,9 +16,10 @@ while ($i) { ...@@ -16,9 +16,10 @@ while ($i) {
} }
--enable_query_log --enable_query_log
set use_stat_tables=PREFERABLY, optimizer_use_condition_selectivity=3; set use_stat_tables=PREFERABLY, optimizer_use_condition_selectivity=3;
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,simulate_file_write_error'; set debug_dbug='+d,simulate_file_write_error';
set @@max_heap_table_size=128*1024; set @@max_heap_table_size=128*1024;
--replace_regex /'.*'/'tmp-file'/ --replace_regex /'.*'/'tmp-file'/
analyze table t1; analyze table t1;
set debug_dbug=''; set debug_dbug= @saved_dbug;
drop table t1; drop table t1;
mysql-test/t/union_crash-714.test
View file @ 451573fa
...@@ -3,7 +3,9 @@ ...@@ -3,7 +3,9 @@
# #
--source include/have_debug.inc --source include/have_debug.inc
create table t1 (i tinyint); create table t1 (i tinyint);
set @saved_dbug = @@session.debug_dbug;
set debug_dbug='+d,bug11747970_raise_error'; set debug_dbug='+d,bug11747970_raise_error';
--error ER_QUERY_INTERRUPTED --error ER_QUERY_INTERRUPTED
insert into t1 (i) select i from t1 union select i from t1; insert into t1 (i) select i from t1 union select i from t1;
drop table t1; drop table t1;
set debug_dbug= @saved_dbug;
\ No newline at end of file
mysql-test/t/warnings_debug.test
View file @ 451573fa
...@@ -9,6 +9,7 @@ create table t1 (a int primary key) engine=innodb; ...@@ -9,6 +9,7 @@ create table t1 (a int primary key) engine=innodb;
# Test that warnings produced during autocommit (after calling # Test that warnings produced during autocommit (after calling
# set_ok_status()) are still reported to the client. # set_ok_status()) are still reported to the client.
set @saved_dbug = @@session.debug_dbug;
SET SESSION debug_dbug="+d,warn_during_ha_commit_trans"; SET SESSION debug_dbug="+d,warn_during_ha_commit_trans";
INSERT INTO t1 VALUES (1); INSERT INTO t1 VALUES (1);
# The warning will be shown automatically by mysqltest; there was a bug where # The warning will be shown automatically by mysqltest; there was a bug where
...@@ -17,3 +18,4 @@ INSERT INTO t1 VALUES (1); ...@@ -17,3 +18,4 @@ INSERT INTO t1 VALUES (1);
SHOW WARNINGS; SHOW WARNINGS;
drop table t1; drop table t1;
set debug_dbug= @saved_dbug;
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7