Skip to content

M
MariaDB
Commit 4e43e2f9 authored by Alice Sherepa's avatar Alice Sherepa
Browse files
Options

MDEV-22008 rpl.rpl_semi_sync fails in bb, MDEV-24418 reenable... 

MDEV-22008 rpl.rpl_semi_sync fails in bb, MDEV-24418 reenable binlog_truncate_innodb and binlog_spurious_ddl_errors, rpl_parallel_retry fails in bb
parent 83d2e084
Show whitespace changes
Inline Side-by-side
Showing with 157 additions and 206 deletions
mysql-test/extra/rpl_tests/rpl_semi_sync.inc
View file @ 4e43e2f9
......@@ -10,7 +10,6 @@ source include/have_innodb.inc;
source include/master-slave.inc;
let $engine_type= InnoDB;
#let $engine_type= MyISAM;
# Suppress warnings that might be generated during the test
connection master;
......@@ -94,7 +93,6 @@ enable_query_log;
echo [ status of semi-sync on master should be OFF ];
show status like 'Rpl_semi_sync_master_clients';
show status like 'Rpl_semi_sync_master_status';
--replace_result 305 304
show status like 'Rpl_semi_sync_master_yes_tx';
# reset master to make sure the following test will start with a clean environment
......@@ -201,16 +199,23 @@ connection slave;
source include/stop_slave.inc;
connection master;
--source include/kill_binlog_dump_threads.inc
set global rpl_semi_sync_master_timeout= 5000;
# The first semi-sync check should be on because after slave stop,
# there are no transactions on the master.
echo [ master status should be ON ];
show status like 'Rpl_semi_sync_master_status';
let $status_var= Rpl_semi_sync_master_status;
let $status_var_value= ON;
source include/wait_for_status_var.inc;
let $status_var= Rpl_semi_sync_master_clients;
let $status_var_value= 0;
source include/wait_for_status_var.inc;
show status like 'Rpl_semi_sync_master_no_tx';
--replace_result 305 304
show status like 'Rpl_semi_sync_master_yes_tx';
show status like 'Rpl_semi_sync_master_clients';
echo [ semi-sync replication of these transactions will fail ];
insert into t1 values (500);
......@@ -225,7 +230,6 @@ source include/wait_for_status_var.inc;
echo [ master status should be OFF ];
show status like 'Rpl_semi_sync_master_status';
show status like 'Rpl_semi_sync_master_no_tx';
--replace_result 305 304
show status like 'Rpl_semi_sync_master_yes_tx';
# Semi-sync status on master is now OFF, so all these transactions
......@@ -246,7 +250,6 @@ insert into t1 values (100);
echo [ master status should be OFF ];
show status like 'Rpl_semi_sync_master_status';
show status like 'Rpl_semi_sync_master_no_tx';
--replace_result 305 304
show status like 'Rpl_semi_sync_master_yes_tx';
--echo #
......@@ -274,9 +277,11 @@ connection master;
# The master semi-sync status should be on again after slave catches up.
echo [ master status should be ON again after slave catches up ];
show status like 'Rpl_semi_sync_master_status';
let $status_var= Rpl_semi_sync_master_status;
let $status_var_value= ON;
source include/wait_for_status_var.inc;
show status like 'Rpl_semi_sync_master_no_tx';
--replace_result 305 304
show status like 'Rpl_semi_sync_master_yes_tx';
show status like 'Rpl_semi_sync_master_clients';
......@@ -332,11 +337,7 @@ replace_result $engine_type ENGINE_TYPE;
eval create table t1 (a int) engine = $engine_type;
drop table t1;
##show status like 'Rpl_semi_sync_master_status';
sync_slave_with_master;
--replace_column 2 #
show status like 'Rpl_relay%';
echo [ test reset master ];
connection master;
......@@ -353,19 +354,7 @@ source include/stop_slave.inc;
reset slave;
# Kill the dump thread on master for previous slave connection and
# wait for it to exit
connection master;
let $_tid= `select id from information_schema.processlist where command = 'Binlog Dump' limit 1`;
if ($_tid)
{
--replace_result $_tid _tid
eval kill query $_tid;
# After dump thread exit, Rpl_semi_sync_master_clients will be 0
let $status_var= Rpl_semi_sync_master_clients;
let $status_var_value= 0;
source include/wait_for_status_var.inc;
}
--source include/kill_binlog_dump_threads.inc
connection slave;
source include/start_slave.inc;
......@@ -404,17 +393,7 @@ connection master;
reset master;
# Kill the dump thread on master for previous slave connection and wait for it to exit
let $_tid= `select id from information_schema.processlist where command = 'Binlog Dump' limit 1`;
if ($_tid)
{
--replace_result $_tid _tid
eval kill query $_tid;
# After dump thread exit, Rpl_semi_sync_master_clients will be 0
let $status_var= Rpl_semi_sync_master_clients;
let $status_var_value= 0;
source include/wait_for_status_var.inc;
}
--source include/kill_binlog_dump_threads.inc
# Do not binlog the following statement because it will generate
# different events for ROW and STATEMENT format
......@@ -459,21 +438,16 @@ SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
connection master;
# Kill the dump thread on master for previous slave connection and wait for it to exit
let $_tid= `select id from information_schema.processlist where command = 'Binlog Dump' limit 1`;
if ($_tid)
{
--replace_result $_tid _tid
eval kill query $_tid;
# After dump thread exit, Rpl_semi_sync_master_clients will be 0
let $status_var= Rpl_semi_sync_master_clients;
let $status_var_value= 0;
source include/wait_for_status_var.inc;
}
--source include/kill_binlog_dump_threads.inc
echo [ Semi-sync status on master should be ON ];
show status like 'Rpl_semi_sync_master_clients';
let $status_var= Rpl_semi_sync_master_clients;
let $status_var_value= 0;
source include/wait_for_status_var.inc;
show status like 'Rpl_semi_sync_master_status';
let $status_var= Rpl_semi_sync_master_status;
let $status_var_value= ON;
source include/wait_for_status_var.inc;
set global rpl_semi_sync_master_enabled= 0;
connection slave;
......
mysql-test/suite/binlog/disabled.def
View file @ 4e43e2f9
......@@ -9,5 +9,3 @@
# Do not use any TAB characters for whitespace.
#
##############################################################################
binlog_truncate_innodb : BUG#11764459 2010-10-20 anitha Originally disabled due to BUG#42643. Product bug fixed, but test changes needed
binlog_spurious_ddl_errors : BUG#11761680 2013-01-18 astha Fixed on mysql-5.6 and trunk
mysql-test/suite/binlog/r/binlog_spurious_ddl_errors.result
View file @ 4e43e2f9
SET @old_binlog_format= @@global.binlog_format;
INSTALL PLUGIN example SONAME 'ha_example.so';
INSTALL PLUGIN example SONAME 'ha_example';
################################################################################
# Verifies if ER_BINLOG_STMT_MODE_AND_ROW_ENGINE happens by setting the binlog
# format to STATEMENT and the transaction isolation level to READ COMMITTED as
......@@ -18,7 +18,7 @@ ALTER TABLE t_row ADD COLUMN b INT;
CREATE TRIGGER trig_row BEFORE INSERT ON t_row FOR EACH ROW INSERT INTO t_stmt VALUES (1);
CREATE INDEX i ON t_row(a);
CREATE TABLE t_row_new ENGINE = InnoDB SELECT * FROM t_row;
ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging.
DROP TABLE t_row;
......@@ -36,12 +36,11 @@ DROP TABLE t_row;
SET binlog_format = ROW;
CREATE TABLE t_stmt (a VARCHAR(100)) ENGINE = EXAMPLE;
ALTER TABLE t_stmt ADD COLUMN b INT;
ERROR 42000: This version of MySQL doesn't yet support 'ALTER TABLE'
CREATE TRIGGER trig_stmt BEFORE INSERT ON t_stmt FOR EACH ROW INSERT INTO t_stmt VALUES (1);
CREATE INDEX i ON t_stmt(a);
ERROR 42000: Too many key parts specified; max 0 parts allowed
CREATE TABLE t_stmt_new ENGINE = EXAMPLE SELECT * FROM t_stmt;
ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statement-based logging.
ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statement-based logging
DROP TABLE t_stmt;
......
mysql-test/suite/binlog/r/binlog_truncate_innodb.result
View file @ 4e43e2f9
......@@ -7,9 +7,11 @@ INSERT INTO t2 VALUES (1),(2),(3);
**** Truncate of empty table shall be logged
TRUNCATE TABLE t1;
TRUNCATE TABLE t2;
show binlog events from <binlog_start>;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t2
DROP TABLE t1,t2;
#
......@@ -18,18 +20,17 @@ DROP TABLE t1,t2;
CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1),(2);
# Connection: default
BEGIN;
INSERT INTO t2 SELECT * FROM t1;
# Connection: truncate
connect truncate,localhost,root,,;
TRUNCATE TABLE t1;
# Connection: default
connection default;
INSERT INTO t2 SELECT * FROM t1;
SELECT COUNT(*) FROM t2;
COUNT(*)
4
COMMIT;
# Connection: truncate
connection truncate;
# Reaping TRUNCATE TABLE
SELECT COUNT(*) FROM t1;
COUNT(*)
......@@ -37,16 +38,20 @@ COUNT(*)
SELECT COUNT(*) FROM t2;
COUNT(*)
4
# Connection: default
show binlog events from <binlog_start>;
connection default;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
disconnect truncate;
DROP TABLE t1,t2;
# Even though the isolation level might be permissive, truncate
# table follows a stricter isolation as its locking is based on
......@@ -59,9 +64,11 @@ SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
TRUNCATE TABLE t1;
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
TRUNCATE TABLE t2;
show binlog events from <binlog_start>;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t2
DROP TABLE t1,t2;
#
......@@ -71,18 +78,17 @@ CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1),(2);
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
# Connection: default
BEGIN;
INSERT INTO t2 SELECT * FROM t1;
# Connection: truncate
connect truncate,localhost,root,,;
TRUNCATE TABLE t1;
# Connection: default
connection default;
INSERT INTO t2 SELECT * FROM t1;
SELECT COUNT(*) FROM t2;
COUNT(*)
4
COMMIT;
# Connection: truncate
connection truncate;
# Reaping TRUNCATE TABLE
SELECT COUNT(*) FROM t1;
COUNT(*)
......@@ -90,16 +96,20 @@ COUNT(*)
SELECT COUNT(*) FROM t2;
COUNT(*)
4
# Connection: default
show binlog events from <binlog_start>;
connection default;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
disconnect truncate;
DROP TABLE t1,t2;
CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
......@@ -109,9 +119,11 @@ SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
TRUNCATE TABLE t1;
SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
TRUNCATE TABLE t2;
show binlog events from <binlog_start>;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t2
DROP TABLE t1,t2;
#
......@@ -121,18 +133,17 @@ CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1),(2);
SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
# Connection: default
BEGIN;
INSERT INTO t2 SELECT * FROM t1;
# Connection: truncate
connect truncate,localhost,root,,;
TRUNCATE TABLE t1;
# Connection: default
connection default;
INSERT INTO t2 SELECT * FROM t1;
SELECT COUNT(*) FROM t2;
COUNT(*)
4
COMMIT;
# Connection: truncate
connection truncate;
# Reaping TRUNCATE TABLE
SELECT COUNT(*) FROM t1;
COUNT(*)
......@@ -140,16 +151,20 @@ COUNT(*)
SELECT COUNT(*) FROM t2;
COUNT(*)
4
# Connection: default
show binlog events from <binlog_start>;
connection default;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
disconnect truncate;
DROP TABLE t1,t2;
CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
......@@ -159,9 +174,11 @@ SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
TRUNCATE TABLE t1;
SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
TRUNCATE TABLE t2;
show binlog events from <binlog_start>;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t2
DROP TABLE t1,t2;
#
......@@ -171,18 +188,17 @@ CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1),(2);
SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
# Connection: default
BEGIN;
INSERT INTO t2 SELECT * FROM t1;
# Connection: truncate
connect truncate,localhost,root,,;
TRUNCATE TABLE t1;
# Connection: default
connection default;
INSERT INTO t2 SELECT * FROM t1;
SELECT COUNT(*) FROM t2;
COUNT(*)
4
COMMIT;
# Connection: truncate
connection truncate;
# Reaping TRUNCATE TABLE
SELECT COUNT(*) FROM t1;
COUNT(*)
......@@ -190,16 +206,20 @@ COUNT(*)
SELECT COUNT(*) FROM t2;
COUNT(*)
4
# Connection: default
show binlog events from <binlog_start>;
connection default;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
disconnect truncate;
DROP TABLE t1,t2;
CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
......@@ -209,9 +229,11 @@ SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
TRUNCATE TABLE t1;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
TRUNCATE TABLE t2;
show binlog events from <binlog_start>;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t2
DROP TABLE t1,t2;
#
......@@ -221,18 +243,17 @@ CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1),(2);
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
# Connection: default
BEGIN;
INSERT INTO t2 SELECT * FROM t1;
# Connection: truncate
connect truncate,localhost,root,,;
TRUNCATE TABLE t1;
# Connection: default
connection default;
INSERT INTO t2 SELECT * FROM t1;
SELECT COUNT(*) FROM t2;
COUNT(*)
4
COMMIT;
# Connection: truncate
connection truncate;
# Reaping TRUNCATE TABLE
SELECT COUNT(*) FROM t1;
COUNT(*)
......@@ -240,16 +261,20 @@ COUNT(*)
SELECT COUNT(*) FROM t2;
COUNT(*)
4
# Connection: default
show binlog events from <binlog_start>;
connection default;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Annotate_rows # # INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Table_map # # table_id: # (test.t2)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Write_rows_v1 # # table_id: # flags: STMT_END_F
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
disconnect truncate;
DROP TABLE t1,t2;
SET BINLOG_FORMAT=STATEMENT;
RESET MASTER;
......@@ -261,9 +286,11 @@ SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
TRUNCATE TABLE t1;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
TRUNCATE TABLE t2;
show binlog events from <binlog_start>;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t2
DROP TABLE t1,t2;
#
......@@ -273,18 +300,17 @@ CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1),(2);
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
# Connection: default
BEGIN;
INSERT INTO t2 SELECT * FROM t1;
# Connection: truncate
connect truncate,localhost,root,,;
TRUNCATE TABLE t1;
# Connection: default
connection default;
INSERT INTO t2 SELECT * FROM t1;
SELECT COUNT(*) FROM t2;
COUNT(*)
4
COMMIT;
# Connection: truncate
connection truncate;
# Reaping TRUNCATE TABLE
SELECT COUNT(*) FROM t1;
COUNT(*)
......@@ -292,14 +318,16 @@ COUNT(*)
SELECT COUNT(*) FROM t2;
COUNT(*)
4
# Connection: default
show binlog events from <binlog_start>;
connection default;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Query # # use `test`; INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Query # # use `test`; INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
disconnect truncate;
DROP TABLE t1,t2;
# Truncate is not supported for SBR if the isolation level is
# READ UNCOMMITTED or READ COMMITTED. These specific isolation
......@@ -312,9 +340,11 @@ SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
TRUNCATE TABLE t1;
SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
TRUNCATE TABLE t2;
show binlog events from <binlog_start>;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t2
DROP TABLE t1,t2;
#
......@@ -324,18 +354,17 @@ CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1),(2);
SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
# Connection: default
BEGIN;
INSERT INTO t2 SELECT * FROM t1;
# Connection: truncate
connect truncate,localhost,root,,;
TRUNCATE TABLE t1;
# Connection: default
connection default;
INSERT INTO t2 SELECT * FROM t1;
SELECT COUNT(*) FROM t2;
COUNT(*)
4
COMMIT;
# Connection: truncate
connection truncate;
# Reaping TRUNCATE TABLE
SELECT COUNT(*) FROM t1;
COUNT(*)
......@@ -343,14 +372,16 @@ COUNT(*)
SELECT COUNT(*) FROM t2;
COUNT(*)
4
# Connection: default
show binlog events from <binlog_start>;
connection default;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Query # # use `test`; INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Query # # use `test`; INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
disconnect truncate;
DROP TABLE t1,t2;
CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
......@@ -360,9 +391,11 @@ SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
TRUNCATE TABLE t1;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
TRUNCATE TABLE t2;
show binlog events from <binlog_start>;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t2
DROP TABLE t1,t2;
#
......@@ -372,18 +405,17 @@ CREATE TABLE t1 (a INT) ENGINE=InnoDB;
CREATE TABLE t2 (a INT) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1),(2);
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
# Connection: default
BEGIN;
INSERT INTO t2 SELECT * FROM t1;
# Connection: truncate
connect truncate,localhost,root,,;
TRUNCATE TABLE t1;
# Connection: default
connection default;
INSERT INTO t2 SELECT * FROM t1;
SELECT COUNT(*) FROM t2;
COUNT(*)
4
COMMIT;
# Connection: truncate
connection truncate;
# Reaping TRUNCATE TABLE
SELECT COUNT(*) FROM t1;
COUNT(*)
......@@ -391,13 +423,16 @@ COUNT(*)
SELECT COUNT(*) FROM t2;
COUNT(*)
4
# Connection: default
show binlog events from <binlog_start>;
connection default;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Query # # use `test`; INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Query # # use `test`; INSERT INTO t2 SELECT * FROM t1
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; TRUNCATE TABLE t1
disconnect truncate;
DROP TABLE t1,t2;
SET BINLOG_FORMAT=@old_binlog_format;
SET @@global.binlog_format = @old_binlog_format;
SET @@session.binlog_format = @old_binlog_format;
mysql-test/suite/binlog/t/binlog_spurious_ddl_errors.test
View file @ 4e43e2f9
......@@ -71,7 +71,6 @@ DROP TABLE t_row;
SET binlog_format = ROW;
CREATE TABLE t_stmt (a VARCHAR(100)) ENGINE = EXAMPLE;
--error ER_NOT_SUPPORTED_YET
ALTER TABLE t_stmt ADD COLUMN b INT;
CREATE TRIGGER trig_stmt BEFORE INSERT ON t_stmt FOR EACH ROW INSERT INTO t_stmt VALUES (1);
......
mysql-test/suite/binlog/t/binlog_truncate_innodb.test
View file @ 4e43e2f9
......@@ -41,4 +41,5 @@ source extra/binlog_tests/binlog_truncate.test;
let $before_truncate = SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
source extra/binlog_tests/binlog_truncate.test;
SET BINLOG_FORMAT=@old_binlog_format;
SET @@global.binlog_format = @old_binlog_format;
SET @@session.binlog_format = @old_binlog_format;
\ No newline at end of file
mysql-test/suite/binlog_encryption/rpl_semi_sync.result
View file @ 4e43e2f9
......@@ -163,20 +163,15 @@ connection slave;
connection slave;
include/stop_slave.inc
connection master;
include/kill_binlog_dump_threads.inc
set global rpl_semi_sync_master_timeout= 5000;
[ master status should be ON ]
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name Value
Rpl_semi_sync_master_no_tx 0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name Value
Rpl_semi_sync_master_yes_tx 14
show status like 'Rpl_semi_sync_master_clients';
Variable_name Value
Rpl_semi_sync_master_clients 1
[ semi-sync replication of these transactions will fail ]
insert into t1 values (500);
[ master status should be OFF ]
......@@ -234,9 +229,6 @@ max(a)
500
connection master;
[ master status should be ON again after slave catches up ]
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name Value
Rpl_semi_sync_master_no_tx 12
......@@ -303,8 +295,6 @@ connection master;
create table t1 (a int) engine = ENGINE_TYPE;
drop table t1;
connection slave;
show status like 'Rpl_relay%';
Variable_name Value
[ test reset master ]
connection master;
reset master;
......@@ -320,8 +310,7 @@ Rpl_semi_sync_master_yes_tx 0
connection slave;
include/stop_slave.inc
reset slave;
connection master;
kill query _tid;
include/kill_binlog_dump_threads.inc
connection slave;
include/start_slave.inc
connection master;
......@@ -353,7 +342,7 @@ include/stop_slave.inc
reset slave;
connection master;
reset master;
kill query _tid;
include/kill_binlog_dump_threads.inc
set sql_log_bin=0;
grant replication slave on *.* to rpl@127.0.0.1 identified by 'rpl_password';
flush privileges;
......@@ -404,11 +393,8 @@ SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name Value
Rpl_semi_sync_slave_status OFF
connection master;
kill query _tid;
include/kill_binlog_dump_threads.inc
[ Semi-sync status on master should be ON ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name Value
Rpl_semi_sync_master_clients 0
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
......
mysql-test/suite/rpl/r/rpl_semi_sync.result
View file @ 4e43e2f9
......@@ -163,20 +163,15 @@ connection slave;
connection slave;
include/stop_slave.inc
connection master;
include/kill_binlog_dump_threads.inc
set global rpl_semi_sync_master_timeout= 5000;
[ master status should be ON ]
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name Value
Rpl_semi_sync_master_no_tx 0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name Value
Rpl_semi_sync_master_yes_tx 14
show status like 'Rpl_semi_sync_master_clients';
Variable_name Value
Rpl_semi_sync_master_clients 1
[ semi-sync replication of these transactions will fail ]
insert into t1 values (500);
[ master status should be OFF ]
......@@ -234,9 +229,6 @@ max(a)
500
connection master;
[ master status should be ON again after slave catches up ]
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name Value
Rpl_semi_sync_master_no_tx 12
......@@ -303,8 +295,6 @@ connection master;
create table t1 (a int) engine = ENGINE_TYPE;
drop table t1;
connection slave;
show status like 'Rpl_relay%';
Variable_name Value
[ test reset master ]
connection master;
reset master;
......@@ -320,8 +310,7 @@ Rpl_semi_sync_master_yes_tx 0
connection slave;
include/stop_slave.inc
reset slave;
connection master;
kill query _tid;
include/kill_binlog_dump_threads.inc
connection slave;
include/start_slave.inc
connection master;
......@@ -353,7 +342,7 @@ include/stop_slave.inc
reset slave;
connection master;
reset master;
kill query _tid;
include/kill_binlog_dump_threads.inc
set sql_log_bin=0;
grant replication slave on *.* to rpl@127.0.0.1 identified by 'rpl_password';
flush privileges;
......@@ -404,11 +393,8 @@ SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name Value
Rpl_semi_sync_slave_status OFF
connection master;
kill query _tid;
include/kill_binlog_dump_threads.inc
[ Semi-sync status on master should be ON ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name Value
Rpl_semi_sync_master_clients 0
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
......
mysql-test/suite/rpl/r/rpl_semi_sync_after_sync.result
View file @ 4e43e2f9
......@@ -164,20 +164,15 @@ connection slave;
connection slave;
include/stop_slave.inc
connection master;
include/kill_binlog_dump_threads.inc
set global rpl_semi_sync_master_timeout= 5000;
[ master status should be ON ]
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name Value
Rpl_semi_sync_master_no_tx 0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name Value
Rpl_semi_sync_master_yes_tx 16
show status like 'Rpl_semi_sync_master_clients';
Variable_name Value
Rpl_semi_sync_master_clients 1
[ semi-sync replication of these transactions will fail ]
insert into t1 values (500);
[ master status should be OFF ]
......@@ -235,9 +230,6 @@ max(a)
500
connection master;
[ master status should be ON again after slave catches up ]
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name Value
Rpl_semi_sync_master_no_tx 12
......@@ -304,8 +296,6 @@ connection master;
create table t1 (a int) engine = ENGINE_TYPE;
drop table t1;
connection slave;
show status like 'Rpl_relay%';
Variable_name Value
[ test reset master ]
connection master;
reset master;
......@@ -321,8 +311,7 @@ Rpl_semi_sync_master_yes_tx 0
connection slave;
include/stop_slave.inc
reset slave;
connection master;
kill query _tid;
include/kill_binlog_dump_threads.inc
connection slave;
include/start_slave.inc
connection master;
......@@ -354,7 +343,7 @@ include/stop_slave.inc
reset slave;
connection master;
reset master;
kill query _tid;
include/kill_binlog_dump_threads.inc
set sql_log_bin=0;
grant replication slave on *.* to rpl@127.0.0.1 identified by 'rpl_password';
flush privileges;
......@@ -405,11 +394,8 @@ SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name Value
Rpl_semi_sync_slave_status OFF
connection master;
kill query _tid;
include/kill_binlog_dump_threads.inc
[ Semi-sync status on master should be ON ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name Value
Rpl_semi_sync_master_clients 0
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
......
mysql-test/suite/rpl/r/rpl_semi_sync_after_sync_row.result
View file @ 4e43e2f9
......@@ -164,20 +164,15 @@ connection slave;
connection slave;
include/stop_slave.inc
connection master;
include/kill_binlog_dump_threads.inc
set global rpl_semi_sync_master_timeout= 5000;
[ master status should be ON ]
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name Value
Rpl_semi_sync_master_no_tx 0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name Value
Rpl_semi_sync_master_yes_tx 14
show status like 'Rpl_semi_sync_master_clients';
Variable_name Value
Rpl_semi_sync_master_clients 1
[ semi-sync replication of these transactions will fail ]
insert into t1 values (500);
[ master status should be OFF ]
......@@ -235,9 +230,6 @@ max(a)
500
connection master;
[ master status should be ON again after slave catches up ]
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name Value
Rpl_semi_sync_master_no_tx 12
......@@ -304,8 +296,6 @@ connection master;
create table t1 (a int) engine = ENGINE_TYPE;
drop table t1;
connection slave;
show status like 'Rpl_relay%';
Variable_name Value
[ test reset master ]
connection master;
reset master;
......@@ -321,8 +311,7 @@ Rpl_semi_sync_master_yes_tx 0
connection slave;
include/stop_slave.inc
reset slave;
connection master;
kill query _tid;
include/kill_binlog_dump_threads.inc
connection slave;
include/start_slave.inc
connection master;
......@@ -354,7 +343,7 @@ include/stop_slave.inc
reset slave;
connection master;
reset master;
kill query _tid;
include/kill_binlog_dump_threads.inc
set sql_log_bin=0;
grant replication slave on *.* to rpl@127.0.0.1 identified by 'rpl_password';
flush privileges;
......@@ -405,11 +394,8 @@ SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name Value
Rpl_semi_sync_slave_status OFF
connection master;
kill query _tid;
include/kill_binlog_dump_threads.inc
[ Semi-sync status on master should be ON ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name Value
Rpl_semi_sync_master_clients 0
show status like 'Rpl_semi_sync_master_status';
Variable_name Value
Rpl_semi_sync_master_status ON
......
mysql-test/suite/rpl/t/rpl_parallel_retry.test
View file @ 4e43e2f9
......@@ -436,6 +436,9 @@ SET @@DEBUG_SYNC='now SIGNAL proceed_by_1000';
--connection spoiler_21
ROLLBACK;
--let $wait_condition= SELECT count(*)=1 FROM information_schema.processlist WHERE state LIKE '%debug sync point%';
--source include/wait_condition.inc
--echo # Release the 2nd worker to proceed
--connection spoiler_22
ROLLBACK;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7