BUG#25688 (RBR: circular replication may cause STMT_END_F flags to be

skipped):

By moving statement end actions from Rows_log_event::do_apply_event() to
Rows_log_event::do_update_pos() they will always be executed, even if
Rows_log_event::do_apply_event() is skipped because the event originated
at the same server. This because Rows_log_event::do_update_pos() is always
executed (unless Rows_log_event::do_apply_event() failed with an error,
in which case the slave stops with an error anyway). 

Adding test case.

Fixing logic to detect if inside a group. If a rotate event occured
when an initial prefix of events for a statement, but for which the
table did contain a key, last_event_start_time is set to zero, causing
rotate to end the group but without unlocking any tables. This left a
lock hanging around, which subsequently triggered an assertion when a
second attempt was made to lock the same sequence of tables.

In order to solve the above problem, a new flag was added to the relay
log info structure that is used to indicate that the replication thread
is currently executing a statement. Using this flag, the replication
thread is in a group if it is either in a statement or inside a trans-
action.

The patch also eliminates some gratuitous header file inclusions that
were not needed (and caused compile errors) and replaced them with
forward definitions.


sql/item_func.cc:
  Including definition of MASTER_INFO.
sql/log.cc:
  Including definition of RELAY_LOG_INFO since it is used in the file.
sql/log_event.cc:
  Moving statement end actions from Rows_log_event::do_apply_event() to
  Rows_log_event::do_update_pos().
  Factoring out code to update group positions and event positions into
  relay log info structure.
  ---
  Adding debugging printouts.
  Fixing logic to detect if inside a group.
sql/log_event.h:
  Adding Rows_log_event::do_update_pos().
sql/mysqld.cc:
  Including definition of MASTER_INFO.
sql/repl_failsafe.cc:
  Including definition of MASTER_INFO.
sql/rpl_mi.h:
  Including definition of RELAY_LOG_INFO since it is used in the file.
sql/rpl_rli.cc:
  Adding member function stmt_done() to do after-statement updates of the
  relay log info structure.
sql/rpl_rli.h:
  Adding member function stmt_done() to do after-statement updates of the
  relay log info structure.
sql/set_var.cc:
  Including definition of MASTER_INFO.
sql/slave.cc:
  Adding debuging printouts.
sql/slave.h:
  Removing inclusion definitions of MASTER_INFO and RELAY_LOG_INFO and
  replacing them with forward declarations since the classes are not
  used in the file. The gratuitous inclusion lead to compile errors in
  the two classes above in files that used neither.
sql/sql_binlog.cc:
  Including definition of RELAY_LOG_INFO since it is used in the file.
sql/sql_class.cc:
  Including definition of RELAY_LOG_INFO since it is used in the file.
sql/sql_class.h:
  Removing inclusion definitions of RELAY_LOG_INFO and replacing it
  with forward declaration since the class is not used in the file.
  The gratuitous inclusion lead to compile errors in the class above
  in files didn't use the class.
sql/sql_insert.cc:
  Including definition of MASTER_INFO.
sql/sql_repl.cc:
  Including definition of MASTER_INFO.
mysql-test/r/rpl_ndb_circular_simplex.result:
  New BitKeeper file ``mysql-test/r/rpl_ndb_circular_simplex.result''
mysql-test/t/rpl_ndb_circular_simplex.test:
  New BitKeeper file ``mysql-test/t/rpl_ndb_circular_simplex.test''

mysql-test/r/rpl_ndb_circular_simplex.result

+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+CREATE TABLE t1 (a int key, b int) ENGINE=NDB;
+SHOW TABLES;
+Tables_in_test
+t1
+RESET MASTER;
+INSERT INTO t1 VALUES (1,2);
+INSERT INTO t1 VALUES (2,3);
+STOP SLAVE;
+CHANGE MASTER TO MASTER_HOST="127.0.0.1",MASTER_PORT=SLAVE_PORT,MASTER_USER="root";
+RESET MASTER;
+START SLAVE;
+SHOW SLAVE STATUS;
+Slave_IO_State	#
+Master_Host	127.0.0.1
+Master_User	root
+Master_Port	9308
+Connect_Retry	60
+Master_Log_File	slave-bin.000001
+Read_Master_Log_Pos	468
+Relay_Log_File	#
+Relay_Log_Pos	#
+Relay_Master_Log_File	slave-bin.000001
+Slave_IO_Running	Yes
+Slave_SQL_Running	Yes
+Replicate_Do_DB	
+Replicate_Ignore_DB	
+Replicate_Do_Table	
+Replicate_Ignore_Table	
+Replicate_Wild_Do_Table	
+Replicate_Wild_Ignore_Table	
+Last_Errno	0
+Last_Error	
+Skip_Counter	0
+Exec_Master_Log_Pos	468
+Relay_Log_Space	#
+Until_Condition	None
+Until_Log_File	
+Until_Log_Pos	0
+Master_SSL_Allowed	No
+Master_SSL_CA_File	
+Master_SSL_CA_Path	
+Master_SSL_Cert	
+Master_SSL_Cipher	
+Master_SSL_Key	
+Seconds_Behind_Master	#
+SELECT * FROM t1 ORDER BY a;
+a	b
+1	2
+2	3
+STOP SLAVE;
+START SLAVE;
+SELECT * FROM t1 ORDER BY a;
+a	b
+1	2
+2	3

mysql-test/t/rpl_ndb_circular_simplex.test

+--source include/have_ndb.inc
+--source include/have_binlog_format_row.inc
+--source include/master-slave.inc
+
+connection master;
+CREATE TABLE t1 (a int key, b int) ENGINE=NDB;
+sync_slave_with_master;
+SHOW TABLES;
+
+# Lose the events from the slave binary log: there is no
+# need to re-create the table on the master.
+connection slave;
+RESET MASTER;
+
+# Insert some values on the slave and master
+connection master;
+INSERT INTO t1 VALUES (1,2);
+# Switch to slave once event is applied and insert a row
+sync_slave_with_master;
+connection slave;
+INSERT INTO t1 VALUES (2,3);
+
+# ... it is now very probable that we have a mixed event in the binary
+# log.  If we don't, the test should still pass, but will not test the
+# mixed event situation.
+
+# The statement is disabled since it cannot reliably show the same
+# info all the time.  Use it for debug purposes.
+
+#SHOW BINLOG EVENTS;
+
+# Replicate back to the master to test this mixed event on the master
+STOP SLAVE;
+
+connection master;
+--replace_result $SLAVE_MYPORT SLAVE_PORT
+eval CHANGE MASTER TO MASTER_HOST="127.0.0.1",MASTER_PORT=$SLAVE_MYPORT,MASTER_USER="root";
+
+RESET MASTER;
+START SLAVE;
+
+connection slave;
+save_master_pos;
+connection master;
+sync_with_master;
+
+# The statement is disabled since it cannot reliably show the same
+# info all the time.  Use it for debug purposes.
+
+#SHOW BINLOG EVENTS;
+
+# Check that there is no error in replication
+--replace_result $MASTER_MYPORT MASTER_PORT
+--replace_column 1 # 8 # 9 # 23 # 33 #
+query_vertical SHOW SLAVE STATUS;
+
+# Check that we have the data on the master
+SELECT * FROM t1 ORDER BY a;
+
+# We should now have another mixed event, likely with "slave" server
+# id last, and with the STMT_END_F flag set.
+
+# The statement is disabled since it cannot reliably show the same
+# info all the time.  Use it for debug purposes.
+
+#SHOW BINLOG EVENTS;
+
+# now lets see that this data is applied correctly on the slave
+STOP SLAVE;
+save_master_pos;
+
+connection slave;
+START SLAVE;
+
+# check that we have the data on the slave
+sync_with_master;
+SELECT * FROM t1 ORDER BY a;

sql/item_func.cc

@@ -22,6 +22,7 @@
 
 #include "mysql_priv.h"
 #include "slave.h"				// for wait_for_master_pos
+#include "rpl_mi.h"
 #include <m_ctype.h>
 #include <hash.h>
 #include <time.h>

sql/log.cc

@@ -20,6 +20,7 @@
 #include "mysql_priv.h"
 #include "sql_repl.h"
 #include "rpl_filter.h"
+#include "rpl_rli.h"
 
 #include <my_dir.h>
 #include <stdarg.h>

sql/log_event.h

@@ -841,6 +841,7 @@ class Log_event
   }
 
 protected:
+
   /**
     Primitive to apply an event to the database.
 
@@ -2242,6 +2243,7 @@ class Rows_log_event : public Log_event
 
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
   virtual int do_apply_event(RELAY_LOG_INFO const *rli);
+  virtual int do_update_pos(RELAY_LOG_INFO *rli);
 
   /*
     Primitive to prepare for a sequence of row executions.

sql/mysqld.cc

@@ -17,6 +17,7 @@
 #include <m_ctype.h>
 #include <my_dir.h>
 #include "slave.h"
+#include "rpl_mi.h"
 #include "sql_repl.h"
 #include "rpl_filter.h"
 #include "repl_failsafe.h"

sql/repl_failsafe.cc

@@ -19,6 +19,7 @@
 #include "repl_failsafe.h"
 #include "sql_repl.h"
 #include "slave.h"
+#include "rpl_mi.h"
 #include "rpl_filter.h"
 #include "log_event.h"
 #include <mysql.h>

sql/rpl_mi.h

@@ -18,6 +18,9 @@
 
 #ifdef HAVE_REPLICATION
 
+#include "rpl_rli.h"
+
+
 /*****************************************************************************
 
   Replication IO Thread

sql/rpl_rli.cc

@@ -15,6 +15,7 @@
 
 #include "mysql_priv.h"
 
+#include "rpl_mi.h"
 #include "rpl_rli.h"
 #include <my_dir.h>    // For MY_STAT
 #include "sql_repl.h"  // For check_binlog_magic
@@ -37,7 +38,7 @@ st_relay_log_info::st_relay_log_info()
    inited(0), abort_slave(0), slave_running(0), until_condition(UNTIL_NONE),
    until_log_pos(0), retried_trans(0),
    tables_to_lock(0), tables_to_lock_count(0),
-   last_event_start_time(0)
+   last_event_start_time(0), m_flags(0)
 {
   DBUG_ENTER("st_relay_log_info::st_relay_log_info");
 
@@ -1086,6 +1087,52 @@ bool st_relay_log_info::cached_charset_compare(char *charset) const
 }
 
 
+void st_relay_log_info::stmt_done(my_off_t const event_master_log_pos,
+                                  time_t event_creation_time)
+{
+  clear_flag(IN_STMT);
+
+  /*
+    If in a transaction, and if the slave supports transactions, just
+    inc_event_relay_log_pos(). We only have to check for OPTION_BEGIN
+    (not OPTION_NOT_AUTOCOMMIT) as transactions are logged with
+    BEGIN/COMMIT, not with SET AUTOCOMMIT= .
+
+    CAUTION: opt_using_transactions means innodb || bdb ; suppose the
+    master supports InnoDB and BDB, but the slave supports only BDB,
+    problems will arise: - suppose an InnoDB table is created on the
+    master, - then it will be MyISAM on the slave - but as
+    opt_using_transactions is true, the slave will believe he is
+    transactional with the MyISAM table. And problems will come when
+    one does START SLAVE; STOP SLAVE; START SLAVE; (the slave will
+    resume at BEGIN whereas there has not been any rollback).  This is
+    the problem of using opt_using_transactions instead of a finer
+    "does the slave support _transactional handler used on the
+    master_".
+
+    More generally, we'll have problems when a query mixes a
+    transactional handler and MyISAM and STOP SLAVE is issued in the
+    middle of the "transaction". START SLAVE will resume at BEGIN
+    while the MyISAM table has already been updated.
+  */
+  if ((sql_thd->options & OPTION_BEGIN) && opt_using_transactions)
+    inc_event_relay_log_pos();
+  else
+  {
+    inc_group_relay_log_pos(event_master_log_pos);
+    flush_relay_log_info(this);
+    /*
+      Note that Rotate_log_event::do_apply_event() does not call this
+      function, so there is no chance that a fake rotate event resets
+      last_master_timestamp.  Note that we update without mutex
+      (probably ok - except in some very rare cases, only consequence
+      is that value may take some time to display in
+      Seconds_Behind_Master - not critical).
+    */
+    last_master_timestamp= event_creation_time;
+  }
+}
+
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
 void st_relay_log_info::cleanup_context(THD *thd, bool error)
 {
@@ -1112,6 +1159,7 @@ void st_relay_log_info::cleanup_context(THD *thd, bool error)
   m_table_map.clear_tables();
   close_thread_tables(thd);
   clear_tables_to_lock();
+  clear_flag(IN_STMT);
   last_event_start_time= 0;
   DBUG_VOID_RETURN;
 }

sql/rpl_rli.h

@@ -51,6 +51,17 @@ struct RPL_TABLE_LIST;
 
 typedef struct st_relay_log_info
 {
+  /**
+     Flags for the state of the replication.
+   */
+  enum enum_state_flag {
+    /** The replication thread is inside a statement */
+    IN_STMT,
+
+    /** Flag counter.  Should always be last */
+    STATE_FLAGS_COUNT
+  };
+
   /*
     If flag set, then rli does not store its state in any info file.
     This is the case only when we execute BINLOG SQL commands inside
@@ -314,6 +325,66 @@ typedef struct st_relay_log_info
     transaction).
    */
   time_t last_event_start_time;
+
+  /**
+    Helper function to do after statement completion.
+
+    This function is called from an event to complete the group by
+    either stepping the group position, if the "statement" is not
+    inside a transaction; or increase the event position, if the
+    "statement" is inside a transaction.
+
+    @param event_log_pos
+    Master log position of the event. The position is recorded in the
+    relay log info and used to produce information for <code>SHOW
+    SLAVE STATUS</code>.
+
+    @param event_creation_time
+    Timestamp for the creation of the event on the master side. The
+    time stamp is recorded in the relay log info and used to compute
+    the <code>Seconds_behind_master</code> field.
+  */
+  void stmt_done(my_off_t event_log_pos,
+                 time_t event_creation_time);
+
+
+  /**
+     Set the value of a replication state flag.
+
+     @param flag Flag to set
+   */
+  void set_flag(enum_state_flag flag)
+  {
+    m_flags |= (1UL << flag);
+  }
+
+  /**
+     Clear the value of a replication state flag.
+
+     @param flag Flag to clear
+   */
+  void clear_flag(enum_state_flag flag)
+  {
+    m_flags &= ~(1UL << flag);
+  }
+
+  /**
+     Is the replication inside a group?
+
+     Replication is inside a group if either:
+     - The OPTION_BEGIN flag is set, meaning we're inside a transaction
+     - The RLI_IN_STMT flag is set, meaning we're inside a statement
+
+     @retval true Replication thread is currently inside a group
+     @retval false Replication thread is currently not inside a group
+   */
+  bool is_in_group() const {
+    return (sql_thd->options & OPTION_BEGIN) ||
+      (m_flags & (1UL << IN_STMT));
+  }
+
+private:
+  uint32 m_flags;
 } RELAY_LOG_INFO;
 
 

sql/set_var.cc

@@ -51,6 +51,7 @@
 #include "mysql_priv.h"
 #include <mysql.h>
 #include "slave.h"
+#include "rpl_mi.h"
 #include <my_getopt.h>
 #include <thr_alarm.h>
 #include <myisam.h>

sql/slave.cc

@@ -17,8 +17,9 @@
 
 #include <mysql.h>
 #include <myisam.h>
-#include "rpl_rli.h"
 #include "slave.h"
+#include "rpl_mi.h"
+#include "rpl_rli.h"
 #include "sql_repl.h"
 #include "rpl_filter.h"
 #include "repl_failsafe.h"
@@ -1731,11 +1732,12 @@ static int exec_relay_log_event(THD* thd, RELAY_LOG_INFO* rli)
     /*
     */
 
-    DBUG_PRINT("info",("type_code=%d (%s), server_id=%d",
-                       type_code, ev->get_type_str(), ev->server_id));
-    DBUG_PRINT("info", ("thd->options={ %s%s}",
+    DBUG_PRINT("exec_event",("%s(type_code: %d; server_id: %d)",
+                       ev->get_type_str(), type_code, ev->server_id));
+    DBUG_PRINT("info", ("thd->options: %s%s; rli->last_event_start_time: %lu",
                         FLAGSTR(thd->options, OPTION_NOT_AUTOCOMMIT),
-                        FLAGSTR(thd->options, OPTION_BEGIN)));
+                        FLAGSTR(thd->options, OPTION_BEGIN),
+                        rli->last_event_start_time));
 
 
 
@@ -1777,21 +1779,21 @@ static int exec_relay_log_event(THD* thd, RELAY_LOG_INFO* rli)
     if (reason == Log_event::EVENT_SKIP_NOT)
       exec_res= ev->apply_event(rli);
 #ifndef DBUG_OFF
-    else
-    {
     /*
       This only prints information to the debug trace.
 
       TODO: Print an informational message to the error log?
     */
     static const char *const explain[] = {
-        "event was not skipped",                  // EVENT_SKIP_NOT,
-        "event originated from this server",      // EVENT_SKIP_IGNORE,
-        "event skip counter was non-zero"         // EVENT_SKIP_COUNT
+      // EVENT_SKIP_NOT,
+      "not skipped",
+      // EVENT_SKIP_IGNORE,
+      "skipped because event originated from this server",
+      // EVENT_SKIP_COUNT
+      "skipped because event skip counter was non-zero"
     };
-      DBUG_PRINT("info", ("%s was skipped because %s",
+    DBUG_PRINT("skip_event", ("%s event was %s",
                               ev->get_type_str(), explain[reason]));
-    }
 #endif
 
     DBUG_PRINT("info", ("apply_event error = %d", exec_res));

sql/slave.h

@@ -22,13 +22,18 @@
 #include "my_list.h"
 #include "rpl_filter.h"
 #include "rpl_tblmap.h"
-#include "rpl_rli.h"
-#include "rpl_mi.h"
 
 #define SLAVE_NET_TIMEOUT  3600
 
 #define MAX_SLAVE_ERROR    2000
 
+
+// Forward declarations
+struct st_relay_log_info;
+typedef st_relay_log_info RELAY_LOG_INFO;
+
+class MASTER_INFO;
+
 /*****************************************************************************
 
   MySQL Replication

sql/sql_binlog.cc

@@ -14,6 +14,7 @@
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA */
 
 #include "mysql_priv.h"
+#include "rpl_rli.h"
 #include "base64.h"
 
 /*

sql/sql_class.cc

@@ -26,6 +26,7 @@
 #endif
 
 #include "mysql_priv.h"
+#include "rpl_rli.h"
 #include <my_bitmap.h>
 #include "log_event.h"
 #include <m_ctype.h>

sql/sql_class.h

@@ -21,9 +21,11 @@
 #endif
 
 #include "log.h"
-#include "rpl_rli.h"
 #include "rpl_tblmap.h"
 
+struct st_relay_log_info;
+typedef st_relay_log_info RELAY_LOG_INFO;
+
 class Query_log_event;
 class Load_log_event;
 class Slave_log_event;

sql/sql_insert.cc

@@ -60,6 +60,7 @@
 #include "sql_select.h"
 #include "sql_show.h"
 #include "slave.h"
+#include "rpl_mi.h"
 
 #ifndef EMBEDDED_LIBRARY
 static TABLE *delayed_get_table(THD *thd,TABLE_LIST *table_list);

sql/sql_repl.cc

@@ -16,6 +16,7 @@
 #include "mysql_priv.h"
 #ifdef HAVE_REPLICATION
 
+#include "rpl_mi.h"
 #include "sql_repl.h"
 #include "log_event.h"
 #include "rpl_filter.h"