Skip to content

M
MariaDB
Commit 76a94a03 authored by Sergey Vojtovich's avatar Sergey Vojtovich
Browse files
Options

MDEV-19090 - Split rocksdb.locking_issues 

This test takes ~6 minutes, split it for better parallelism.
parent a24dffdb
Show whitespace changes
Inline Side-by-side
Showing with 764 additions and 739 deletions
storage/rocksdb/mysql-test/rocksdb/r/locking_issues.result
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 1.1:
- Locking rows that do not exist when using all primary key columns in
- a WHERE clause
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id1 INT, id2 INT, value INT, PRIMARY KEY(id1, id2));
INSERT INTO t0 VALUES (1,1,0), (3,3,0), (4,4,0), (6,6,0);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE id1=1 AND id2=5 FOR UPDATE;
id1 id2 value
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
INSERT INTO t0 VALUES (1,5,0);
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
SELECT * FROM t0 WHERE id1=1 AND id2=5 FOR UPDATE;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 1.1:
- Locking rows that do not exist when using all primary key columns in
- a WHERE clause
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id1 INT, id2 INT, value INT, PRIMARY KEY(id1, id2));
INSERT INTO t0 VALUES (1,1,0), (3,3,0), (4,4,0), (6,6,0);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE id1=1 AND id2=5 FOR UPDATE;
id1 id2 value
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
INSERT INTO t0 VALUES (1,5,0);
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
SELECT * FROM t0 WHERE id1=1 AND id2=5 FOR UPDATE;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 1.2:
- Locking rows that do not exist without using all primary key
- columns in a WHERE clause
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id1 INT, id2 INT, value INT, PRIMARY KEY(id1, id2));
INSERT INTO t0 VALUES (1,1,0), (3,3,0), (4,4,0), (6,6,0);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE id1=1 FOR UPDATE;
id1 id2 value
1 1 0
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE id1=1 AND id2=4 FOR UPDATE;
id1 id2 value
INSERT INTO t0 VALUES (1,5,0);
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 1.2:
- Locking rows that do not exist without using all primary key
- columns in a WHERE clause
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id1 INT, id2 INT, value INT, PRIMARY KEY(id1, id2));
INSERT INTO t0 VALUES (1,1,0), (3,3,0), (4,4,0), (6,6,0);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE id1=1 FOR UPDATE;
id1 id2 value
1 1 0
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE id1=1 AND id2=4 FOR UPDATE;
id1 id2 value
INSERT INTO t0 VALUES (1,5,0);
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 2:
- Rows that are scanned but do not match the WHERE are not locked
- using REPEATABLE READ transaction isolation level unless
- rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
CREATE TABLE t0(id INT PRIMARY KEY, value INT);
INSERT INTO t0 VALUES (1,0), (2,1), (3,0), (4,0), (5,1);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con1;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
id value
2 1
5 1
connection con2;
UPDATE t0 SET VALUE=10 WHERE id=1;
UPDATE t0 SET VALUE=10 WHERE id=5;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
UPDATE t0 SET value=100 WHERE id in (4,5) and value>0;
connection con2;
SELECT * FROM t0 WHERE id=4 FOR UPDATE;
id value
4 0
COMMIT;
SELECT * FROM t0;
id value
1 10
2 1
3 0
4 0
5 1
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 2:
- Rows that are scanned but do not match the WHERE are not locked
- using READ COMMITTED transaction isolation level unless
- rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
CREATE TABLE t0(id INT PRIMARY KEY, value INT);
INSERT INTO t0 VALUES (1,0), (2,1), (3,0), (4,0), (5,1);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con1;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
id value
2 1
5 1
connection con2;
UPDATE t0 SET VALUE=10 WHERE id=1;
UPDATE t0 SET VALUE=10 WHERE id=5;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
UPDATE t0 SET value=100 WHERE id in (4,5) and value>0;
connection con2;
SELECT * FROM t0 WHERE id=4 FOR UPDATE;
id value
4 0
COMMIT;
SELECT * FROM t0;
id value
1 10
2 1
3 0
4 0
5 1
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 2:
- Rows that are scanned but do not match the WHERE are not locked
- using REPEATABLE READ transaction isolation level unless
- rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
SET GLOBAL rocksdb_lock_scanned_rows=ON;
CREATE TABLE t0(id INT PRIMARY KEY, value INT);
INSERT INTO t0 VALUES (1,0), (2,1), (3,0), (4,0), (5,1);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con1;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
id value
2 1
5 1
connection con2;
UPDATE t0 SET VALUE=10 WHERE id=1;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
SET GLOBAL rocksdb_lock_scanned_rows=0;
-----------------------------------------------------------------------
- Locking issues case 2:
- Rows that are scanned but do not match the WHERE are not locked
- using READ COMMITTED transaction isolation level unless
- rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
SET GLOBAL rocksdb_lock_scanned_rows=ON;
CREATE TABLE t0(id INT PRIMARY KEY, value INT);
INSERT INTO t0 VALUES (1,0), (2,1), (3,0), (4,0), (5,1);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con1;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
id value
2 1
5 1
connection con2;
UPDATE t0 SET VALUE=10 WHERE id=1;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
SET GLOBAL rocksdb_lock_scanned_rows=0;
-----------------------------------------------------------------------
- Locking issues case 3:
- After creating a snapshot, other clients updating rows
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
UPDATE t0 SET VALUE=VALUE+1 WHERE id=190000;
connection con1;
ERROR: 1213
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 3:
- After creating a snapshot, other clients updating rows
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
UPDATE t0 SET VALUE=VALUE+1 WHERE id=190000;
connection con1;
id value
190000 1
ERROR: 0
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 4:
- Phantom rows
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
INSERT INTO t0 VALUES(200001,1), (-1,1);
connection con1;
id value
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 4:
- Phantom rows
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
INSERT INTO t0 VALUES(200001,1), (-1,1);
connection con1;
id value
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 5:
- Deleting primary key
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
UPDATE t0 SET value=100 WHERE id=190000;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
DELETE FROM t0 WHERE id=190000;
COMMIT;
connection con1;
ERROR: 1213
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 5:
- Deleting primary key
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
UPDATE t0 SET value=100 WHERE id=190000;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
DELETE FROM t0 WHERE id=190000;
COMMIT;
connection con1;
id value
ERROR: 0
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 6:
- Changing primary key
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
UPDATE t0 SET value=100 WHERE id=190000;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
UPDATE t0 SET id=200001 WHERE id=190000;
COMMIT;
connection con1;
ERROR: 1213
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 6:
- Changing primary key
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
UPDATE t0 SET value=100 WHERE id=190000;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
UPDATE t0 SET id=200001 WHERE id=190000;
COMMIT;
connection con1;
id value
ERROR: 0
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
-----------------------------------------------------------------------
- Locking issues case 7:
- Rows that are scanned as part of a query but not in the table being
- updated should not be locked unless rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t1, t2;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
CREATE TABLE t1(id INT PRIMARY KEY, value INT);
CREATE TABLE t2(id INT PRIMARY KEY, value INT);
INSERT INTO t1 VALUES (1,1), (2,2), (3,3);
INSERT INTO t2 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
lock_scanned_rows is 0
connection con1;
UPDATE t1 JOIN t2 ON t1.id = t2.id SET t1.value=t1.value+100 WHERE t2.id=3;
connection con2;
UPDATE t2 SET value=value+100;
SELECT * FROM t2;
id value
1 101
2 102
3 103
4 104
5 105
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
DROP TABLE t2;
-----------------------------------------------------------------------
- Locking issues case 7:
- Rows that are scanned as part of a query but not in the table being
- updated should not be locked unless rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t1, t2;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
CREATE TABLE t1(id INT PRIMARY KEY, value INT);
CREATE TABLE t2(id INT PRIMARY KEY, value INT);
INSERT INTO t1 VALUES (1,1), (2,2), (3,3);
INSERT INTO t2 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
lock_scanned_rows is 0
connection con1;
UPDATE t1 JOIN t2 ON t1.id = t2.id SET t1.value=t1.value+100 WHERE t2.id=3;
connection con2;
UPDATE t2 SET value=value+100;
SELECT * FROM t2;
id value
1 101
2 102
3 103
4 104
5 105
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
DROP TABLE t2;
-----------------------------------------------------------------------
- Locking issues case 7:
- Rows that are scanned as part of a query but not in the table being
- updated should not be locked unless rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t1, t2;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
SET GLOBAL rocksdb_lock_scanned_rows=ON;
CREATE TABLE t1(id INT PRIMARY KEY, value INT);
CREATE TABLE t2(id INT PRIMARY KEY, value INT);
INSERT INTO t1 VALUES (1,1), (2,2), (3,3);
INSERT INTO t2 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
lock_scanned_rows is 1
connection con1;
UPDATE t1 JOIN t2 ON t1.id = t2.id SET t1.value=t1.value+100 WHERE t2.id=3;
connection con2;
UPDATE t2 SET value=value+100 WHERE id=3;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
UPDATE t2 SET value=value+100 WHERE id IN (1,2,4,5);
SELECT * FROM t2;
id value
1 101
2 102
3 3
4 104
5 105
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
DROP TABLE t2;
SET GLOBAL rocksdb_lock_scanned_rows=0;
-----------------------------------------------------------------------
- Locking issues case 7:
- Rows that are scanned as part of a query but not in the table being
- updated should not be locked unless rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t1, t2;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
SET GLOBAL rocksdb_lock_scanned_rows=ON;
CREATE TABLE t1(id INT PRIMARY KEY, value INT);
CREATE TABLE t2(id INT PRIMARY KEY, value INT);
INSERT INTO t1 VALUES (1,1), (2,2), (3,3);
INSERT INTO t2 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
lock_scanned_rows is 1
connection con1;
UPDATE t1 JOIN t2 ON t1.id = t2.id SET t1.value=t1.value+100 WHERE t2.id=3;
connection con2;
UPDATE t2 SET value=value+100 WHERE id=3;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
UPDATE t2 SET value=value+100 WHERE id IN (1,2,4,5);
SELECT * FROM t2;
id value
1 101
2 102
3 3
4 104
5 105
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
DROP TABLE t2;
SET GLOBAL rocksdb_lock_scanned_rows=0;
tests moved to rocksdb.locking_issues_case*
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case1_1_rc.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 1.1:
- Locking rows that do not exist when using all primary key columns in
- a WHERE clause
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id1 INT, id2 INT, value INT, PRIMARY KEY(id1, id2));
INSERT INTO t0 VALUES (1,1,0), (3,3,0), (4,4,0), (6,6,0);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE id1=1 AND id2=5 FOR UPDATE;
id1 id2 value
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
INSERT INTO t0 VALUES (1,5,0);
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
SELECT * FROM t0 WHERE id1=1 AND id2=5 FOR UPDATE;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case1_1_rr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 1.1:
- Locking rows that do not exist when using all primary key columns in
- a WHERE clause
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id1 INT, id2 INT, value INT, PRIMARY KEY(id1, id2));
INSERT INTO t0 VALUES (1,1,0), (3,3,0), (4,4,0), (6,6,0);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE id1=1 AND id2=5 FOR UPDATE;
id1 id2 value
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
INSERT INTO t0 VALUES (1,5,0);
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
SELECT * FROM t0 WHERE id1=1 AND id2=5 FOR UPDATE;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case1_2_rc.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 1.2:
- Locking rows that do not exist without using all primary key
- columns in a WHERE clause
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id1 INT, id2 INT, value INT, PRIMARY KEY(id1, id2));
INSERT INTO t0 VALUES (1,1,0), (3,3,0), (4,4,0), (6,6,0);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE id1=1 FOR UPDATE;
id1 id2 value
1 1 0
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE id1=1 AND id2=4 FOR UPDATE;
id1 id2 value
INSERT INTO t0 VALUES (1,5,0);
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case1_2_rr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 1.2:
- Locking rows that do not exist without using all primary key
- columns in a WHERE clause
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id1 INT, id2 INT, value INT, PRIMARY KEY(id1, id2));
INSERT INTO t0 VALUES (1,1,0), (3,3,0), (4,4,0), (6,6,0);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE id1=1 FOR UPDATE;
id1 id2 value
1 1 0
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE id1=1 AND id2=4 FOR UPDATE;
id1 id2 value
INSERT INTO t0 VALUES (1,5,0);
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case2_rc.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 2:
- Rows that are scanned but do not match the WHERE are not locked
- using READ COMMITTED transaction isolation level unless
- rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
CREATE TABLE t0(id INT PRIMARY KEY, value INT);
INSERT INTO t0 VALUES (1,0), (2,1), (3,0), (4,0), (5,1);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con1;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
id value
2 1
5 1
connection con2;
UPDATE t0 SET VALUE=10 WHERE id=1;
UPDATE t0 SET VALUE=10 WHERE id=5;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
UPDATE t0 SET value=100 WHERE id in (4,5) and value>0;
connection con2;
SELECT * FROM t0 WHERE id=4 FOR UPDATE;
id value
4 0
COMMIT;
SELECT * FROM t0;
id value
1 10
2 1
3 0
4 0
5 1
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case2_rc_lsr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 2:
- Rows that are scanned but do not match the WHERE are not locked
- using READ COMMITTED transaction isolation level unless
- rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
SET GLOBAL rocksdb_lock_scanned_rows=ON;
CREATE TABLE t0(id INT PRIMARY KEY, value INT);
INSERT INTO t0 VALUES (1,0), (2,1), (3,0), (4,0), (5,1);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con1;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
id value
2 1
5 1
connection con2;
UPDATE t0 SET VALUE=10 WHERE id=1;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
SET GLOBAL rocksdb_lock_scanned_rows=0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case2_rr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 2:
- Rows that are scanned but do not match the WHERE are not locked
- using REPEATABLE READ transaction isolation level unless
- rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
CREATE TABLE t0(id INT PRIMARY KEY, value INT);
INSERT INTO t0 VALUES (1,0), (2,1), (3,0), (4,0), (5,1);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con1;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
id value
2 1
5 1
connection con2;
UPDATE t0 SET VALUE=10 WHERE id=1;
UPDATE t0 SET VALUE=10 WHERE id=5;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
UPDATE t0 SET value=100 WHERE id in (4,5) and value>0;
connection con2;
SELECT * FROM t0 WHERE id=4 FOR UPDATE;
id value
4 0
COMMIT;
SELECT * FROM t0;
id value
1 10
2 1
3 0
4 0
5 1
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case2_rr_lsr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 2:
- Rows that are scanned but do not match the WHERE are not locked
- using REPEATABLE READ transaction isolation level unless
- rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
SET GLOBAL rocksdb_lock_scanned_rows=ON;
CREATE TABLE t0(id INT PRIMARY KEY, value INT);
INSERT INTO t0 VALUES (1,0), (2,1), (3,0), (4,0), (5,1);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con1;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
id value
2 1
5 1
connection con2;
UPDATE t0 SET VALUE=10 WHERE id=1;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
SET GLOBAL rocksdb_lock_scanned_rows=0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case3_rc.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 3:
- After creating a snapshot, other clients updating rows
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
UPDATE t0 SET VALUE=VALUE+1 WHERE id=190000;
connection con1;
id value
190000 1
ERROR: 0
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case3_rr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 3:
- After creating a snapshot, other clients updating rows
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
UPDATE t0 SET VALUE=VALUE+1 WHERE id=190000;
connection con1;
ERROR: 1213
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case4_rc.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 4:
- Phantom rows
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
INSERT INTO t0 VALUES(200001,1), (-1,1);
connection con1;
id value
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case4_rr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 4:
- Phantom rows
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
INSERT INTO t0 VALUES(200001,1), (-1,1);
connection con1;
id value
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case5_rc.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 5:
- Deleting primary key
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
UPDATE t0 SET value=100 WHERE id=190000;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
DELETE FROM t0 WHERE id=190000;
COMMIT;
connection con1;
id value
ERROR: 0
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case5_rr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 5:
- Deleting primary key
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
UPDATE t0 SET value=100 WHERE id=190000;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
DELETE FROM t0 WHERE id=190000;
COMMIT;
connection con1;
ERROR: 1213
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case6_rc.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 6:
- Changing primary key
- using READ COMMITTED transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
UPDATE t0 SET value=100 WHERE id=190000;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
UPDATE t0 SET id=200001 WHERE id=190000;
COMMIT;
connection con1;
id value
ERROR: 0
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case6_rr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 6:
- Changing primary key
- using REPEATABLE READ transaction isolation level
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t0;
CREATE TABLE t0(id INT AUTO_INCREMENT PRIMARY KEY, value INT);
Inserting 200,000 rows
UPDATE t0 SET value=100 WHERE id=190000;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
SELECT * FROM t0 WHERE value > 0 FOR UPDATE;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
UPDATE t0 SET id=200001 WHERE id=190000;
COMMIT;
connection con1;
ERROR: 1213
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case7_rc.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 7:
- Rows that are scanned as part of a query but not in the table being
- updated should not be locked unless rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t1, t2;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
CREATE TABLE t1(id INT PRIMARY KEY, value INT);
CREATE TABLE t2(id INT PRIMARY KEY, value INT);
INSERT INTO t1 VALUES (1,1), (2,2), (3,3);
INSERT INTO t2 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
lock_scanned_rows is 0
connection con1;
UPDATE t1 JOIN t2 ON t1.id = t2.id SET t1.value=t1.value+100 WHERE t2.id=3;
connection con2;
UPDATE t2 SET value=value+100;
SELECT * FROM t2;
id value
1 101
2 102
3 103
4 104
5 105
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
DROP TABLE t2;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case7_rc_lsr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 7:
- Rows that are scanned as part of a query but not in the table being
- updated should not be locked unless rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t1, t2;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
SET GLOBAL rocksdb_lock_scanned_rows=ON;
CREATE TABLE t1(id INT PRIMARY KEY, value INT);
CREATE TABLE t2(id INT PRIMARY KEY, value INT);
INSERT INTO t1 VALUES (1,1), (2,2), (3,3);
INSERT INTO t2 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
BEGIN;
lock_scanned_rows is 1
connection con1;
UPDATE t1 JOIN t2 ON t1.id = t2.id SET t1.value=t1.value+100 WHERE t2.id=3;
connection con2;
UPDATE t2 SET value=value+100 WHERE id=3;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
UPDATE t2 SET value=value+100 WHERE id IN (1,2,4,5);
SELECT * FROM t2;
id value
1 101
2 102
3 3
4 104
5 105
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
DROP TABLE t2;
SET GLOBAL rocksdb_lock_scanned_rows=0;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case7_rr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 7:
- Rows that are scanned as part of a query but not in the table being
- updated should not be locked unless rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t1, t2;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
CREATE TABLE t1(id INT PRIMARY KEY, value INT);
CREATE TABLE t2(id INT PRIMARY KEY, value INT);
INSERT INTO t1 VALUES (1,1), (2,2), (3,3);
INSERT INTO t2 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
lock_scanned_rows is 0
connection con1;
UPDATE t1 JOIN t2 ON t1.id = t2.id SET t1.value=t1.value+100 WHERE t2.id=3;
connection con2;
UPDATE t2 SET value=value+100;
SELECT * FROM t2;
id value
1 101
2 102
3 103
4 104
5 105
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
DROP TABLE t2;
storage/rocksdb/mysql-test/rocksdb/r/locking_issues_case7_rr_lsr.result 0 → 100644
View file @ 76a94a03
-----------------------------------------------------------------------
- Locking issues case 7:
- Rows that are scanned as part of a query but not in the table being
- updated should not be locked unless rocksdb_lock_scanned_rows is on
-----------------------------------------------------------------------
DROP TABLE IF EXISTS t1, t2;
SELECT @@global.rocksdb_lock_scanned_rows;
@@global.rocksdb_lock_scanned_rows
0
SET GLOBAL rocksdb_lock_scanned_rows=ON;
CREATE TABLE t1(id INT PRIMARY KEY, value INT);
CREATE TABLE t2(id INT PRIMARY KEY, value INT);
INSERT INTO t1 VALUES (1,1), (2,2), (3,3);
INSERT INTO t2 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connection con1;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
connection con2;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN;
lock_scanned_rows is 1
connection con1;
UPDATE t1 JOIN t2 ON t1.id = t2.id SET t1.value=t1.value+100 WHERE t2.id=3;
connection con2;
UPDATE t2 SET value=value+100 WHERE id=3;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
UPDATE t2 SET value=value+100 WHERE id IN (1,2,4,5);
SELECT * FROM t2;
id value
1 101
2 102
3 3
4 104
5 105
connection con1;
COMMIT;
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
DROP TABLE t2;
SET GLOBAL rocksdb_lock_scanned_rows=0;
storage/rocksdb/mysql-test/rocksdb/t/locking_issues.test
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case1_1.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case1_1.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case1_2.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case1_2.inc
let $lock_scanned_rows=0;
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case2.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case2.inc
# Rerun the case2 tests with rocksdb_lock_scanned_rows on
let $lock_scanned_rows=1;
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case2.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case2.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case3.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case3.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case4.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case4.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case5.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case5.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case6.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case6.inc
let $lock_scanned_rows=0;
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case7.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case7.inc
# Rerun the case7 tests with rocksdb_lock_scanned_rows on
let $lock_scanned_rows=1;
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case7.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case7.inc
--echo tests moved to rocksdb.locking_issues_case*
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case1_1_rc.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case1_1.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case1_1_rr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case1_1.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case1_2_rc.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case1_2.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case1_2_rr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case1_2.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case2_rc.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $lock_scanned_rows=0;
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case2.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case2_rc_lsr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $lock_scanned_rows=1;
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case2.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case2_rr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $lock_scanned_rows=0;
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case2.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case2_rr_lsr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $lock_scanned_rows=1;
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case2.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case3_rc.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case3.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case3_rr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case3.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case4_rc.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case4.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case4_rr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case4.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case5_rc.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case5.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case5_rr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case5.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case6_rc.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case6.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case6_rr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case6.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case7_rc.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $lock_scanned_rows=0;
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case7.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case7_rc_lsr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $lock_scanned_rows=1;
let $isolation_level = READ COMMITTED;
--source include/locking_issues_case7.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case7_rr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $lock_scanned_rows=0;
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case7.inc
storage/rocksdb/mysql-test/rocksdb/t/locking_issues_case7_rr_lsr.test 0 → 100644
View file @ 76a94a03
--source include/have_rocksdb.inc
let $lock_scanned_rows=1;
let $isolation_level = REPEATABLE READ;
--source include/locking_issues_case7.inc
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7