Commit ca0defad authored by ram@mysql.r18.ru's avatar ram@mysql.r18.ru

patches from sleepycat.com have been applied (SCRUM)

ha_berkeley::rename_table() has been added (SCRUM)
parent acc4c439
......@@ -536,11 +536,9 @@ __db_meta_setup(dbenv, dbp, name, meta, oflags, do_metachk)
* and even a checksum error isn't a reason to panic the environment.
*/
if ((ret = __db_chk_meta(dbenv, dbp, meta, do_metachk)) != 0) {
if (ret == -1) {
if (ret == -1)
__db_err(dbenv,
"%s: metadata page checksum error", name);
ret = EINVAL;
}
goto bad_format;
}
......@@ -577,7 +575,7 @@ __db_meta_setup(dbenv, dbp, name, meta, oflags, do_metachk)
bad_format:
__db_err(dbenv, "%s: unexpected file type or format", name);
return (ret);
return (ret == 0 ? EINVAL : ret);
}
/*
......
......@@ -268,6 +268,8 @@ __log_txn_lsn(dbenv, lsnp, mbytesp, bytesp)
if (mbytesp != NULL) {
*mbytesp = lp->stat.st_wc_mbytes;
*bytesp = (u_int32_t)(lp->stat.st_wc_bytes + lp->b_off);
lp->stat.st_wc_mbytes = lp->stat.st_wc_bytes = 0;
}
R_UNLOCK(dbenv, &dblp->reginfo);
......
......@@ -344,6 +344,23 @@ __memp_fopen_int(dbmfp, mfp, path, flags, mode, pagesize)
goto err;
}
/*
* Figure out the file's size.
*
* !!!
* We can't use off_t's here, or in any code in the mainline library
* for that matter. (We have to use them in the os stubs, of course,
* as there are system calls that take them as arguments.) The reason
* is some customers build in environments where an off_t is 32-bits,
* but still run where offsets are 64-bits, and they pay us a lot of
* money.
*/
if ((ret = __os_ioinfo(
dbenv, rpath, dbmfp->fhp, &mbytes, &bytes, NULL)) != 0) {
__db_err(dbenv, "%s: %s", rpath, db_strerror(ret));
goto err;
}
/*
* Get the file id if we weren't given one. Generated file id's
* don't use timestamps, otherwise there'd be no chance of any
......@@ -470,6 +487,7 @@ __memp_fopen_int(dbmfp, mfp, path, flags, mode, pagesize)
F_SET(mfp, MP_DIRECT);
if (LF_ISSET(DB_EXTENT))
F_SET(mfp, MP_EXTENT);
F_SET(mfp, MP_CAN_MMAP);
if (path == NULL)
F_SET(mfp, MP_TEMP);
......@@ -479,21 +497,6 @@ __memp_fopen_int(dbmfp, mfp, path, flags, mode, pagesize)
* and find the number of the last page in the file, all the
* time being careful not to overflow 32 bits.
*
* !!!
* We can't use off_t's here, or in any code in the mainline
* library for that matter. (We have to use them in the os
* stubs, of course, as there are system calls that take them
* as arguments.) The reason is that some customers build in
* environments where an off_t is 32-bits, but still run where
* offsets are 64-bits, and they pay us a lot of money.
*/
if ((ret = __os_ioinfo(
dbenv, rpath, dbmfp->fhp, &mbytes, &bytes, NULL)) != 0) {
__db_err(dbenv, "%s: %s", rpath, db_strerror(ret));
goto err;
}
/*
* During verify or recovery, we might have to cope with a
* truncated file; if the file size is not a multiple of the
* page size, round down to a page, we'll take care of the
......@@ -582,7 +585,7 @@ __memp_fopen_int(dbmfp, mfp, path, flags, mode, pagesize)
* compiler will perpetrate, doing the comparison in a portable way is
* flatly impossible. Hope that mmap fails if the file is too large.
*/
#define DB_MAXMMAPSIZE (10 * 1024 * 1024) /* 10 Mb. */
#define DB_MAXMMAPSIZE (10 * 1024 * 1024) /* 10 MB. */
if (F_ISSET(mfp, MP_CAN_MMAP)) {
if (path == NULL)
F_CLR(mfp, MP_CAN_MMAP);
......
......@@ -1198,6 +1198,9 @@ gap_check: lp->wait_recs = 0;
* replica get flushed now and again.
*/
ret = dbenv->log_flush(dbenv, &ckp_lsn);
/* Update the last_ckp in the txn region. */
if (ret == 0)
__txn_updateckp(dbenv, &rp->lsn);
break;
case DB___txn_regop:
if (!F_ISSET(dbenv, DB_ENV_REP_LOGSONLY))
......
......@@ -1209,18 +1209,7 @@ __txn_checkpoint(dbenv, kbytes, minutes, flags)
return (ret);
}
/*
* We want to make sure last_ckp only moves forward; since
* we drop locks above and in log_put, it's possible
* for two calls to __txn_ckp_log to finish in a different
* order from how they were called.
*/
R_LOCK(dbenv, &mgr->reginfo);
if (log_compare(&region->last_ckp, &ckp_lsn) < 0) {
region->last_ckp = ckp_lsn;
(void)time(&region->time_ckp);
}
R_UNLOCK(dbenv, &mgr->reginfo);
__txn_updateckp(dbenv, &ckp_lsn);
}
return (0);
}
......@@ -1404,3 +1393,36 @@ __txn_reset(dbenv)
return (__txn_recycle_log(dbenv,
NULL, &scrap, 0, TXN_MINIMUM, TXN_MAXIMUM));
}
/*
* __txn_updateckp --
* Update the last_ckp field in the transaction region. This happens
* at the end of a normal checkpoint and also when a replication client
* receives a checkpoint record.
*
* PUBLIC: void __txn_updateckp __P((DB_ENV *, DB_LSN *));
*/
void
__txn_updateckp(dbenv, lsnp)
DB_ENV *dbenv;
DB_LSN *lsnp;
{
DB_TXNMGR *mgr;
DB_TXNREGION *region;
mgr = dbenv->tx_handle;
region = mgr->reginfo.primary;
/*
* We want to make sure last_ckp only moves forward; since
* we drop locks above and in log_put, it's possible
* for two calls to __txn_ckp_log to finish in a different
* order from how they were called.
*/
R_LOCK(dbenv, &mgr->reginfo);
if (log_compare(&region->last_ckp, lsnp) < 0) {
region->last_ckp = *lsnp;
(void)time(&region->time_ckp);
}
R_UNLOCK(dbenv, &mgr->reginfo);
}
......@@ -1940,6 +1940,24 @@ int ha_berkeley::delete_table(const char *name)
DBUG_RETURN(error);
}
int ha_berkeley::rename_table(const char * from, const char * to)
{
int error;
char from_buff[FN_REFLEN];
char to_buff[FN_REFLEN];
if ((error= db_create(&file, db_env, 0)))
my_errno= error;
else
error= file->rename(file,
fn_format(from_buff, from, "", ha_berkeley_ext, 2 | 4),
NULL, fn_format(to_buff, to, "", ha_berkeley_ext,
2 | 4), 0);
return error;
}
/*
How many seeks it will take to read through the table
This is to be comparable to the number returned by records_in_range so
......
......@@ -152,6 +152,7 @@ class ha_berkeley: public handler
int create(const char *name, register TABLE *form,
HA_CREATE_INFO *create_info);
int delete_table(const char *name);
int rename_table(const char* from, const char* to);
THR_LOCK_DATA **store_lock(THD *thd, THR_LOCK_DATA **to,
enum thr_lock_type lock_type);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment