Merge pilot.mysql.com:/data/msvensson/mysql/mysql-5.1-rpl

into  pilot.mysql.com:/data/msvensson/mysql/mysql-5.1-maint2


mysql-test/lib/mtr_cases.pm:
  Auto merged
mysql-test/mysql-test-run.pl:
  Manual merge

mysql-test/include/circular_rpl_for_4_hosts_init.inc

@@ -18,7 +18,7 @@
 --source include/master-slave.inc
 
 #
-# Set up circular ring by schema A->B->C-D->A 
+# Set up circular ring by schema A->B->C->D->A 
 #
 
 --connection slave

mysql-test/lib/My/ConfigFactory.pm

@@ -416,7 +416,7 @@ sub post_fix_mysql_cluster_section {
 
   # Add a [mysl_cluster.<suffix>] section for each
   # defined [cluster_config.<suffix>] section
-  foreach my $group ( $config->like('cluster_config\.\w*') )
+  foreach my $group ( $config->like('cluster_config\.\w*$') )
   {
     my @urls;
     # Generate ndb_connectstring for this cluster
@@ -497,7 +497,7 @@ sub run_generate_sections_from_cluster_config {
   my @options= ('ndb_mgmd', 'ndbd',
 		'mysqld', 'ndbapi');
 
-  foreach my $group ( $config->like('cluster_config\.\w*') ) {
+  foreach my $group ( $config->like('cluster_config\.\w*$') ) {
 
     # Keep track of current index per process type
     my %idxes;
@@ -580,7 +580,7 @@ sub new_config {
 
 
   $self->run_section_rules($config,
-			   'cluster_config\.\w*',
+			   'cluster_config\.\w*$',
 			   @cluster_config_rules);
   $self->run_generate_sections_from_cluster_config($config);
 

mysql-test/lib/mtr_cases.pm

@@ -722,6 +722,16 @@ sub collect_one_test_case {
   # ----------------------------------------------------------------------
   process_opts_file($tinfo, "$testdir/$tname-slave.opt", 'slave_opt');
   
+  
+  #-----------------------------------------------------------------------
+  # Check for test specific config file
+  #-----------------------------------------------------------------------
+  my $test_cnf_file= "$testdir/$tname.cnf";
+  if ( -f $test_cnf_file) {
+    # Specifies the configuration file to use for this test
+    $tinfo->{'template_path'}= $test_cnf_file;
+  }
+
   # ----------------------------------------------------------------------
   # Check for test specific config file
   # ----------------------------------------------------------------------

mysql-test/mysql-test-run.pl

@@ -196,9 +196,12 @@ our %mysqld_variables;
 
 my $source_dist= 0;
 
-our $opt_max_save_core= 5;
+my $opt_max_save_core= $ENV{MTR_MAX_SAVE_CORE} || 5;
 my $num_saved_cores= 0;  # Number of core files saved in vardir/log/ so far.
 
+my $opt_max_save_datadir= $ENV{MTR_MAX_SAVE_DATADIR} || 20;
+my $num_saved_datadir= 0;  # Number of datadirs saved in vardir/log/ so far.
+
 select(STDOUT);
 $| = 1; # Automatically flush STDOUT
 
@@ -641,6 +644,7 @@ sub command_line_setup {
 	     'client-debugger=s'        => \$opt_client_debugger,
              'strace-client:s'          => \$opt_strace_client,
              'max-save-core=i'          => \$opt_max_save_core,
+             'max-save-datadir=i'       => \$opt_max_save_datadir,
 
              # Coverage, profiling etc
              'gcov'                     => \$opt_gcov,
@@ -2567,6 +2571,10 @@ sub run_testcase ($) {
 
     if ( started(all_servers()) == 0 )
     {
+
+      # Remove old datadirs
+      clean_datadir();
+
       # Restore old ENV
       while (my ($option, $value)= each( %old_env )) {
 	if (defined $value){
@@ -2690,17 +2698,14 @@ sub run_testcase ($) {
 	  mtr_report_test_passed($tinfo, $opt_timer);
 	}
 
-	if ( $opt_check_testcases )
-	{
-	  if (check_testcase($tinfo, "after"))
+	if ( $opt_check_testcases and check_testcase($tinfo, "after"))
 	{
 	  # Stop all servers that are known to be running
 	  stop_all_servers();
-	    after_test_failure($tinfo->{'name'});
+	  clean_datadir();
 	  mtr_report("Resuming tests...\n");
 	}
       }
-      }
       elsif ( $res == 62 )
       {
 	# Testcase itself tell us to skip this one
@@ -2765,7 +2770,7 @@ sub run_testcase ($) {
     {
       # Server failed, probably crashed
       $tinfo->{comment}=
-	"Server failed during test run";
+	"Server $proc failed during test run";
 
       report_failure_and_restart($tinfo);
       return 1;
@@ -2910,67 +2915,119 @@ sub check_expected_crash_and_restart {
 }
 
 
+sub clean_datadir {
+
+  mtr_verbose("Cleaning datadirs...");
+
+  foreach my $cluster ( clusters() )
+  {
+    my $cluster_dir= "$opt_vardir/".$cluster->{name};
+    mtr_verbose(" - removing '$cluster_dir'");
+    rmtree($cluster_dir);
+
+  }
+
+  foreach my $mysqld ( mysqlds() )
+  {
+    my $mysqld_dir= dirname($mysqld->value('datadir'));
+    if (-d $mysqld_dir ) {
+      mtr_verbose(" - removing '$mysqld_dir'");
+      rmtree($mysqld_dir);
+    }
+  }
+
+  # Remove all files in tmp and var/tmp
+  rmtree("$opt_vardir/tmp");
+  mkpath("$opt_vardir/tmp");
+  if ($opt_tmpdir ne "$opt_vardir/tmp"){
+    rmtree($opt_tmpdir);
+    mkpath($opt_tmpdir);
+  }
+}
+
+
 #
-# Save any interesting files in the data_dir
-# before the data dir is removed.
+# Limit number of core files saved
 #
-sub save_files_after_test_failure($$) {
-  my $test_name= shift;
-  my $data_dir= shift;
-  my $save_name= "$opt_vardir/log/$test_name";
+sub limit_cores_after_failure ($) {
+  my ($datadir)= @_;
 
   # Look for core files
-  foreach my $core_file ( glob("$data_dir/core*") )
+  foreach my $core_file ( glob("$datadir/core*") )
   {
-    last if $opt_max_save_core > 0 && $num_saved_cores >= $opt_max_save_core;
     my $core_name= basename($core_file);
-    mtr_report(" - saving '$core_name'");
-    mkpath($save_name) if ! -d $save_name;
-    rename("$core_file", "$save_name/$core_name");
+    if ($opt_max_save_core > 0 && $num_saved_cores >= $opt_max_save_core) {
+      # Delete file to avoid saving it  when the datadir is later saved
+      mtr_report(" - deleting '$core_name'",
+		 "($num_saved_cores/$opt_max_save_core)");
+      unlink("$core_file");
+    }
+    else {
+      mtr_report(" - found '$core_name'",
+		 "($num_saved_cores/$opt_max_save_core)");
+    }
     ++$num_saved_cores;
   }
 }
 
+#
+# Save datadir before it's removed
+#
+sub save_datadir_after_failure($$) {
+  my ($dir, $savedir)= @_;
 
-sub after_test_failure ($) {
-  my $test_name= shift;
-
-  mtr_report("Cleaning datadirs...");
-
-  foreach my $mysqld ( mysqlds() )
+  if ($opt_max_save_datadir > 0 &&
+      $num_saved_datadir >= $opt_max_save_datadir)
   {
-    my $data_dir= $mysqld->value('datadir');
-    my $name= basename($data_dir);
-    save_files_after_test_failure($test_name, $data_dir);
-    mtr_debug("Removing '$data_dir'");
-    rmtree($data_dir);
+    mtr_report(" - skipping '$dir'");
+  }
+  else {
+    mtr_report(" - saving '$dir'");
+    my $dir_name= basename($dir);
+    rename("$dir", "$savedir/$dir_name");
   }
+}
 
-  # Remove the ndb_*_fs dirs for all ndbd nodes
-  # forcing a clean start of ndb next time
-  foreach my $cluster ( clusters() )
-  {
-    foreach my $ndbd ( ndbds($cluster) )
-    {
-      my $data_dir= $ndbd->value('DataDir');
-      foreach my $fs_dir ( glob("$data_dir/ndb_*_fs") ) {
-	rmtree($fs_dir);
-	mtr_debug("Removing '$fs_dir'");
+
+sub after_failure ($) {
+  my ($tinfo)= @_;
+
+  mtr_report("Saving datadirs...");
+
+  my $save_dir= "$opt_vardir/log/";
+  $save_dir.= $tinfo->{name};
+  # Add combination name if any
+  $save_dir.= "_$tinfo->{combination}"
+    if defined $tinfo->{combination};
+
+  mkpath($save_dir) if ! -d $save_dir;
+
+  # Save the used my.cnf file
+  copy($path_config_file, $save_dir);
+
+  if ( clusters() ) {
+    foreach my $cluster ( clusters() ) {
+
+      foreach my $server ( ndbds($cluster), ndb_mgmds($cluster) ) {
+	my $data_dir= $server->value('DataDir');
+	limit_cores_after_failure($data_dir);
       }
 
-      my $backup_dir= $ndbd->value('BackupDataDir');
-      rmtree("$backup_dir/BACKUP");
-      mtr_debug("Removing '$backup_dir'");
+      my $cluster_dir= "$opt_vardir/".$cluster->{name};
+      save_datadir_after_failure($cluster_dir, $save_dir);
     }
   }
-
-  # Remove all files in tmp and var/tmp
-  rmtree("$opt_vardir/tmp");
-  mkpath("$opt_vardir/tmp");
-  if ($opt_tmpdir ne "$opt_vardir/tmp"){
-    rmtree($opt_tmpdir);
-    mkpath($opt_tmpdir);
+  else {
+    foreach my $mysqld ( mysqlds() ) {
+      my $data_dir= $mysqld->value('datadir');
+      limit_cores_after_failure($data_dir);
+      save_datadir_after_failure(dirname($data_dir), $save_dir);
     }
+  }
+
+  $num_saved_datadir++;
+
+  clean_datadir();
 }
 
 
@@ -2983,7 +3040,7 @@ sub report_failure_and_restart ($) {
   stop_all_servers();
 
   # Collect and clean files
-  after_test_failure($tinfo->{'name'});
+  after_failure($tinfo);
 
   mtr_report("Resuming tests...\n");
 }
@@ -4117,7 +4174,12 @@ Options for debugging the product
                         Example: $0 --strace-client=ktrace
   max-save-core         Limit the number of core files saved (to avoid filling
                         up disks for heavily crashing server). Defaults to
-                        $opt_max_save_core, set to 0 for no limit.
+                        $opt_max_save_core, set to 0 for no limit. Set
+                        it's default with MTR_MAX_SAVE_CORE
+  max-save-datadir      Limit the number of datadir saved (to avoid filling
+                        up disks for heavily crashing server). Defaults to
+                        $opt_max_save_datadir, set to 0 for no limit. Set
+                        it's default with MTR_MAX_SAVE_DATDIR
 
 Options for valgrind
 

mysql-test/suite/rpl/r/rpl_circular_for_4_hosts.result

-*** Set up circular ring by schema A->B->C-D->A *** 
+*** Set up circular ring by schema A->B->C->D->A *** 
 stop slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 reset master;

mysql-test/suite/rpl/t/disabled.def

@@ -15,5 +15,4 @@ rpl_innodb_bug28430      : Bug #32247 2007-11-27 mats Test reports wrong value o
 rpl_view                   : Bug#32654: rpl_view.test fails randomly
 rpl_ndb_multi              : Bug#30751: rpl_ndb_multi missing row in output
 rpl_log_pos                : Bug#8693 Test 'rpl_log_pos' fails sometimes
-rpl_circular_for_4_hosts  : Needs updated config
 

mysql-test/suite/rpl/t/rpl_circular_for_4_hosts-master.opt

---slave-num=3 --log-slave-updates --innodb

mysql-test/suite/rpl/t/rpl_circular_for_4_hosts-slave.opt

---log-slave-updates --innodb

mysql-test/suite/rpl/t/rpl_circular_for_4_hosts.cnf

+!include ../my.cnf
+
+[mysqld.1]
+log-slave-updates
+innodb
+
+[mysqld.2]
+log-slave-updates
+innodb
+
+[mysqld.3]
+log-slave-updates
+innodb
+
+[mysqld.4]
+log-slave-updates
+innodb
+
+[ENV]
+SLAVE_MYPORT1=		@mysqld.3.port
+SLAVE_MYSOCK1=		@mysqld.3.socket
+
+SLAVE_MYPORT2=		@mysqld.4.port
+SLAVE_MYSOCK2=		@mysqld.4.socket
+
+
+

mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_2ch.result

@@ -97,5 +97,6 @@ COUNT(*)	SUM(a)	b
 100	64100	master1
 100	64000	slave
 
-DELETE FROM t1;
+DROP TABLE t1;
+DROP TABLE IF EXISTS t1;
 

mysql-test/suite/rpl_ndb/t/disabled.def

@@ -12,6 +12,5 @@
 
 rpl_ndb_circular         : Bug#33849 COMMIT event missing in cluster circular replication.
 rpl_ndb_circular_simplex : Bug#33849 COMMIT event missing in cluster circular replication.
-
+rpl_ndb_circular_2ch	 : Bug#33849 COMMIT event missing in cluster circular replication.
 # the below testcase have been reworked to avoid the bug, test contains comment, keep bug open
-rpl_ndb_circular_2ch : Needs updated config

mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_2ch-master.opt

---slave-num=2 --server-id=1 --log-bin -log-slave-updates

mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_2ch-slave.opt

---server-id=2 --log-bin --log-slave-updates --skip-slave-start

mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_2ch.cnf

+!include ../my.cnf
+
+[mysqld.1.1]
+server-id= 1
+log-bin
+log-slave-updates
+
+[mysqld.2.1]
+server-id= 1
+log-bin
+log-slave-updates
+
+[mysqld.1.slave]
+server-id= 2
+log-bin
+log-slave-updates
+skip-slave-start
+
+[mysqld.2.slave]
+server-id= 2
+master-host=		127.0.0.1
+master-port=		@mysqld.2.1.port
+master-password=	@mysqld.2.1.#password
+master-user=		@mysqld.2.1.#user
+master-connect-retry=	1
+init-rpl-role=		slave
+log-bin
+log-slave-updates
+skip-slave-start
+ndb_connectstring=	@mysql_cluster.slave.ndb_connectstring
+
+[ENV]
+
+SLAVE_MYPORT1=		@mysqld.2.slave.port
+SLAVE_MYSOCK1=		@mysqld.2.slave.socket

mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_2ch.test

@@ -170,10 +170,11 @@ SELECT COUNT(*), SUM(a), b FROM t1 WHERE c = 3 GROUP BY b ORDER BY b;
 
 # Clean up
 --connection master
-DELETE FROM t1;
+DROP TABLE t1;
 --connection slave
-let $wait_condition= SELECT COUNT(*)=0 FROM t1;
---source include/wait_condition.inc
+--disable_warings
+DROP TABLE IF EXISTS t1;
+--enable_warnings
 --echo
 
 # End of test 5.1