BUG#53259 Unsafe statement binlogged in statement format w/MyIsam temp tables

BUG#54872 MBR: replication failure caused by using tmp table inside transaction Changed criteria to classify a statement as unsafe in order to reduce the number of spurious warnings. So a statement is classified as unsafe when there is on-going transaction at any point of the execution if: 1. The mixed statement is about to update a transactional table and a non-transactional table. 2. The mixed statement is about to update a temporary transactional table and a non-transactional table. 3. The mixed statement is about to update a transactional table and read from a non-transactional table. 4. The mixed statement is about to update a temporary transactional table and read from a non-transactional table. 5. The mixed statement is about to update a non-transactional table and read from a transactional table when the isolation level is lower than repeatable read. After updating a transactional table if: 6. The mixed statement is about to update a non-transactional table and read from a temporary transactional table. 7. The mixed statement is about to update a non-transactional table and read from a temporary transactional table. 8. The mixed statement is about to update a non-transactionala table and read from a temporary non-transactional table. 9. The mixed statement is about to update a temporary non-transactional table and update a non-transactional table. 10. The mixed statement is about to update a temporary non-transactional table and read from a non-transactional table. 11. A statement is about to update a non-transactional table and the option variables.binlog_direct_non_trans_update is OFF. The reason for this is that locks acquired may not protected a concurrent transaction of interfering in the current execution and by consequence in the result. So the patch reduced the number of spurious unsafe warnings. Besides we fixed a regression caused by BUG#51894, which makes temporary tables to go into the trx-cache if there is an on-going transaction. In MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have updates to temporary non-transactional tables that must be written to the binary log while rolling back the transaction. So we fix this problem by writing the content of the trx-cache to the binary log while rolling back a transaction if a non-transactional temporary table was updated and the binary logging format is MIXED.

BUG#53259 Unsafe statement binlogged in statement format w/MyIsam temp tables
BUG#54872 MBR: replication failure caused by using tmp table inside transaction Changed criteria to classify a statement as unsafe in order to reduce the number of spurious warnings. So a statement is classified as unsafe when there is on-going transaction at any point of the execution if: 1. The mixed statement is about to update a transactional table and a non-transactional table. 2. The mixed statement is about to update a temporary transactional table and a non-transactional table. 3. The mixed statement is about to update a transactional table and read from a non-transactional table. 4. The mixed statement is about to update a temporary transactional table and read from a non-transactional table. 5. The mixed statement is about to update a non-transactional table and read from a transactional table when the isolation level is lower than repeatable read. After updating a transactional table if: 6. The mixed statement is about to update a non-transactional table and read from a temporary transactional table. 7. The mixed statement is about to update a non-transactional table and read from a temporary transactional table. 8. The mixed statement is about to update a non-transactionala table and read from a temporary non-transactional table. 9. The mixed statement is about to update a temporary non-transactional table and update a non-transactional table. 10. The mixed statement is about to update a temporary non-transactional table and read from a non-transactional table. 11. A statement is about to update a non-transactional table and the option variables.binlog_direct_non_trans_update is OFF. The reason for this is that locks acquired may not protected a concurrent transaction of interfering in the current execution and by consequence in the result. So the patch reduced the number of spurious unsafe warnings. Besides we fixed a regression caused by BUG#51894, which makes temporary tables to go into the trx-cache if there is an on-going transaction. In MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have updates to temporary non-transactional tables that must be written to the binary log while rolling back the transaction. So we fix this problem by writing the content of the trx-cache to the binary log while rolling back a transaction if a non-transactional temporary table was updated and the binary logging format is MIXED.
e662b51e · Alfranio Correia · 759aabe3 · e662b51e · e662b51e · e662b51e
Commit e662b51e authored Jun 30, 2010 by Alfranio Correia
23 changed files
--- a/mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test
+++ b/mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test
@@ -77,11 +77,11 @@ eval UPDATE t2, t1 SET t2.data = CONCAT($data, $data, $data, $data),
 connection slave;
 --source include/wait_for_slave_sql_to_stop.inc

-if (`SELECT @@binlog_format = 'STATEMENT'`)
+if (`SELECT @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'`)
 {
  SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 1;
 }
-if (`SELECT @@binlog_format = 'ROW' || @@binlog_format = 'MIXED'`)
+if (`SELECT @@binlog_format = 'ROW'`)
 {
  SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 2;
 }

--- a/mysql-test/suite/binlog/r/binlog_multi_engine.result
+++ b/mysql-test/suite/binlog/r/binlog_multi_engine.result
@@ -7,8 +7,6 @@ SET SESSION BINLOG_FORMAT=STATEMENT;
 INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 The last event before the COMMIT is use `test`; UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c
 *** Please look in binlog_multi_engine.test if you have a diff here ****
 START TRANSACTION;
@@ -73,6 +71,9 @@ mysqld-bin.000001	#	Table_map	#	#	table_id: # (mysql.ndb_apply_status)
 mysqld-bin.000001	#	Write_rows	#	#	table_id: #
 mysqld-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
 mysqld-bin.000001	#	Query	#	#	COMMIT
+mysqld-bin.000001	#	Query	#	#	BEGIN
+mysqld-bin.000001	#	Query	#	#	use `test`; UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c
+mysqld-bin.000001	#	Query	#	#	COMMIT
 mysqld-bin.000001	#	Query	#	#	use `test`; TRUNCATE t1m
 mysqld-bin.000001	#	Query	#	#	use `test`; TRUNCATE t1b
 mysqld-bin.000001	#	Query	#	#	use `test`; TRUNCATE t1n

--- a/mysql-test/suite/binlog/r/binlog_stm_binlog.result
+++ b/mysql-test/suite/binlog/r/binlog_stm_binlog.result
@@ -635,7 +635,9 @@ COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
 COERCIBILITY(s1) d3;
 DROP TEMPORARY TABLE tmp1;
 END
-master-bin.000001	#	Query	#	#	use `bug39182`; DROP TEMPORARY TABLE IF EXISTS `tmp1` /* generated by server */
+master-bin.000001	#	Query	#	#	use `bug39182`; CREATE TEMPORARY TABLE tmp1
+SELECT * FROM t1 WHERE a LIKE CONCAT("%",  NAME_CONST('s1',_utf8'test' COLLATE 'utf8_unicode_ci'), "%")
+master-bin.000001	#	Query	#	#	use `bug39182`; DROP TEMPORARY TABLE tmp1
 DROP PROCEDURE p1;
 DROP TABLE t1;
 DROP DATABASE bug39182;

--- a/mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
+++ b/mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
@@ -110,8 +110,6 @@ delete from t2;
 reset master;
 insert into t1 values(9);
 insert into t2 select * from t1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
@@ -126,8 +124,6 @@ reset master;
 insert into t1 values(10);
 begin;
 insert into t2 select * from t1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
@@ -245,8 +241,6 @@ Warnings:
 Warning	1196	Some non-transactional changed tables couldn't be rolled back
 create table t0 (n int);
 insert t0 select * from t1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 set autocommit=1;
 insert into t0 select GET_LOCK("lock1",null);
 Warnings:
@@ -288,7 +282,7 @@ master-bin.000001	#	Query	#	#	use `test`; create temporary table t1 (a int) engi
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; insert t1 values (1)
-master-bin.000001	#	Query	#	#	ROLLBACK
+master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	use `test`; create table t0 (n int)
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; insert t0 select * from t1

--- a/mysql-test/suite/ndb/r/ndb_binlog_format.result
+++ b/mysql-test/suite/ndb/r/ndb_binlog_format.result
@@ -8,8 +8,6 @@ SET SESSION BINLOG_FORMAT=STATEMENT;
 INSERT INTO t1 VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t2 VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1, t2 SET m = 2, b = 3 WHERE n = c;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 START TRANSACTION;
 INSERT INTO t3 VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1, t3 SET m = 2, e = 3 WHERE n = f;

--- a/mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result
+++ b/mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result
@@ -72,8 +72,6 @@ before call db1.p1()
 INSERT INTO db1.t2 VALUES ('before call db1.p2()');
 BEGIN;
 CALL db1.p2();
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 ROLLBACK;
 INSERT INTO db1.t2 VALUES ('after call db1.p2()');
 SELECT * FROM db1.t1;

--- a/mysql-test/suite/rpl/r/rpl_concurrency_error.result
+++ b/mysql-test/suite/rpl/r/rpl_concurrency_error.result
@@ -29,8 +29,6 @@ UPDATE t SET f = 'magenta 2' WHERE f = 'red';
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 INSERT INTO t VALUES (5 + (2 * 10),"brown");
 INSERT INTO n VALUES (now(),"brown");
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 ROLLBACK;
 Warnings:
@@ -58,8 +56,6 @@ UPDATE t SET f = 'dark blue 2' WHERE f = 'red';
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 INSERT INTO t VALUES (6 + (2 * 10),"brown");
 INSERT INTO n VALUES (now(),"brown");
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 COMMIT;
 show binlog events from <binlog_start>;
@@ -83,8 +79,6 @@ UPDATE t SET f = 'magenta 1' WHERE f = 'red';
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 INSERT INTO t VALUES (5 + (1 * 10),"brown");
 INSERT INTO n VALUES (now(),"brown");
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 ROLLBACK;
 Warnings:
@@ -110,8 +104,6 @@ UPDATE t SET f = 'dark blue 1' WHERE f = 'red';
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 INSERT INTO t VALUES (6 + (1 * 10),"brown");
 INSERT INTO n VALUES (now(),"brown");
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 COMMIT;
 show binlog events from <binlog_start>;

--- a/mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result
+++ b/mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result
@@ -19,7 +19,7 @@ SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 1;
 START SLAVE SQL_THREAD;
 *** Single statement on both transactional and non-transactional tables. ***
 Got one of the listed errors
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 2;
+SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 1;
 START SLAVE SQL_THREAD;
 source include/diff_master_slave.inc;
 ########################################################################################

--- a/mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result
+++ b/mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result
--- a/mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result
+++ b/mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result
@@ -393,15 +393,13 @@ master-bin.000001	#	Query	#	#	COMMIT
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 23, 1, COUNT(*) FROM tt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 23, 1, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 23, 1, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-

@@ -409,15 +407,13 @@ master-bin.000001	#	Query	#	#	COMMIT
 INSERT INTO tt_1(trans_id, stmt_id, info) SELECT 24, 1, COUNT(*) FROM nt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_1(trans_id, stmt_id, info) SELECT 24, 1, COUNT(*) FROM nt_1
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> nT << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> nT << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_1(trans_id, stmt_id, info) SELECT 24, 1, COUNT(*) FROM nt_1
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> nT << -e-e-e-e-e-e-e-e-e-e-e-

@@ -425,23 +421,13 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 UPDATE nt_3, tt_3 SET nt_3.info= "new text 25 --> 1", tt_3.info= "new text 25 --> 1" where nt_3.trans_id = tt_3.trans_id and tt_3.trans_id = 1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_3)
-master-bin.000001	#	Update_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_3)
-master-bin.000001	#	Update_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; UPDATE nt_3, tt_3 SET nt_3.info= "new text 25 --> 1", tt_3.info= "new text 25 --> 1" where nt_3.trans_id = tt_3.trans_id and tt_3.trans_id = 1
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> NT << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> NT << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_3)
-master-bin.000001	#	Update_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_3)
-master-bin.000001	#	Update_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; UPDATE nt_3, tt_3 SET nt_3.info= "new text 25 --> 1", tt_3.info= "new text 25 --> 1" where nt_3.trans_id = tt_3.trans_id and tt_3.trans_id = 1
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> NT << -e-e-e-e-e-e-e-e-e-e-e-

@@ -449,23 +435,13 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 INSERT INTO nt_4(trans_id, stmt_id) VALUES (26, 1);
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_4)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_4)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_4(trans_id, stmt_id) VALUES (26, 1)
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> NT-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> NT-trig << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_4)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_4)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_4(trans_id, stmt_id) VALUES (26, 1)
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> NT-trig << -e-e-e-e-e-e-e-e-e-e-e-

@@ -473,35 +449,13 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (27, 1, fc_i_tt_5_suc(27, 1));
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (27, 1, fc_i_tt_5_suc(27, 1))
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> NT-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> NT-func << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (27, 1, fc_i_tt_5_suc(27, 1))
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> NT-func << -e-e-e-e-e-e-e-e-e-e-e-

@@ -509,23 +463,13 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 UPDATE tt_4, nt_4 SET tt_4.info= "new text 28 --> 1", nt_4.info= "new text 28 --> 1" where nt_4.trans_id = tt_4.trans_id and tt_4.trans_id = 1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_4)
-master-bin.000001	#	Update_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_4)
-master-bin.000001	#	Update_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; UPDATE tt_4, nt_4 SET tt_4.info= "new text 28 --> 1", nt_4.info= "new text 28 --> 1" where nt_4.trans_id = tt_4.trans_id and tt_4.trans_id = 1
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> TN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> TN << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_4)
-master-bin.000001	#	Update_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_4)
-master-bin.000001	#	Update_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; UPDATE tt_4, nt_4 SET tt_4.info= "new text 28 --> 1", nt_4.info= "new text 28 --> 1" where nt_4.trans_id = tt_4.trans_id and tt_4.trans_id = 1
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> TN << -e-e-e-e-e-e-e-e-e-e-e-

@@ -533,23 +477,13 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 INSERT INTO tt_3(trans_id, stmt_id) VALUES (29, 1);
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_3)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_3)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_3(trans_id, stmt_id) VALUES (29, 1)
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> TN-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> TN-trig << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_3)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_3)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_3(trans_id, stmt_id) VALUES (29, 1)
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> TN-trig << -e-e-e-e-e-e-e-e-e-e-e-

@@ -557,35 +491,13 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (30, 1, fc_i_nt_5_suc(30, 1));
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (30, 1, fc_i_nt_5_suc(30, 1))
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> TN-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> TN-func << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
-master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.tt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (30, 1, fc_i_nt_5_suc(30, 1))
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -e-e-e-e-e-e-e-e-e-e-e- >> TN-func << -e-e-e-e-e-e-e-e-e-e-e-

@@ -604,15 +516,13 @@ INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 31, 1, COUNT(*) FROM tt_1 UNION
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 31, 1, COUNT(*) FROM tt_1 UNION SELECT 23, 1, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tNe << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tNe << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 31, 1, COUNT(*) FROM tt_1 UNION SELECT 23, 1, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tNe << -e-e-e-e-e-e-e-e-e-e-e-

@@ -630,16 +540,14 @@ INSERT INTO nt_4(trans_id, stmt_id) VALUES (33, 1), (26, 1);
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_4)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_4(trans_id, stmt_id) VALUES (33, 1), (26, 1)
+master-bin.000001	#	Query	#	#	ROLLBACK
 -e-e-e-e-e-e-e-e-e-e-e- >> NeT-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> NeT-trig << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_4)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_4(trans_id, stmt_id) VALUES (33, 1), (26, 1)
+master-bin.000001	#	Query	#	#	ROLLBACK
 -e-e-e-e-e-e-e-e-e-e-e- >> NeT-trig << -e-e-e-e-e-e-e-e-e-e-e-

 -b-b-b-b-b-b-b-b-b-b-b- >> NeT-func << -b-b-b-b-b-b-b-b-b-b-b-
@@ -647,20 +555,14 @@ INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (34, 1, ''), (30, 2, fc_i_tt_5_
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (34, 1, ''), (30, 2, fc_i_tt_5_suc (34, 1))
+master-bin.000001	#	Query	#	#	ROLLBACK
 -e-e-e-e-e-e-e-e-e-e-e- >> NeT-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> NeT-func << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (34, 1, ''), (30, 2, fc_i_tt_5_suc (34, 1))
+master-bin.000001	#	Query	#	#	ROLLBACK
 -e-e-e-e-e-e-e-e-e-e-e- >> NeT-func << -e-e-e-e-e-e-e-e-e-e-e-

 -b-b-b-b-b-b-b-b-b-b-b- >> TeN-trig << -b-b-b-b-b-b-b-b-b-b-b-
@@ -668,16 +570,14 @@ INSERT INTO tt_3(trans_id, stmt_id) VALUES (35, 1), (29, 1);
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_3)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_3(trans_id, stmt_id) VALUES (35, 1), (29, 1)
+master-bin.000001	#	Query	#	#	ROLLBACK
 -e-e-e-e-e-e-e-e-e-e-e- >> TeN-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> TeN-trig << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_3)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_3(trans_id, stmt_id) VALUES (35, 1), (29, 1)
+master-bin.000001	#	Query	#	#	ROLLBACK
 -e-e-e-e-e-e-e-e-e-e-e- >> TeN-trig << -e-e-e-e-e-e-e-e-e-e-e-

 -b-b-b-b-b-b-b-b-b-b-b- >> TeN-func << -b-b-b-b-b-b-b-b-b-b-b-
@@ -685,24 +585,14 @@ INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (36, 1, ''), (30, 1, fc_i_nt_5_
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (36, 1, ''), (30, 1, fc_i_nt_5_suc (36, 1))
+master-bin.000001	#	Query	#	#	ROLLBACK
 -e-e-e-e-e-e-e-e-e-e-e- >> TeN-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> TeN-func << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_5)
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_6)
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: #
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (36, 1, ''), (30, 1, fc_i_nt_5_suc (36, 1))
+master-bin.000001	#	Query	#	#	ROLLBACK
 -e-e-e-e-e-e-e-e-e-e-e- >> TeN-func << -e-e-e-e-e-e-e-e-e-e-e-


@@ -6434,8 +6324,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 205, 2, COUNT(*) FROM tt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 205, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> T << -b-b-b-b-b-b-b-b-b-b-b-
@@ -6452,8 +6341,7 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -b-b-b-b-b-b-b-b-b-b-b- >> B tN T C << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 205, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_1(trans_id, stmt_id) VALUES (205, 4)
@@ -6762,8 +6650,7 @@ INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 213, 2, COUNT(*) FROM tt_1 UNIO
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 213, 2, COUNT(*) FROM tt_1 UNION SELECT 205, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tNe << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> T << -b-b-b-b-b-b-b-b-b-b-b-
@@ -6780,8 +6667,7 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 -b-b-b-b-b-b-b-b-b-b-b- >> B tNe T C << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 213, 2, COUNT(*) FROM tt_1 UNION SELECT 205, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_1(trans_id, stmt_id) VALUES (213, 4)
@@ -6986,8 +6872,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 219, 2, COUNT(*) FROM tt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 219, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> T << -b-b-b-b-b-b-b-b-b-b-b-
@@ -7003,8 +6888,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -b-b-b-b-b-b-b-b-b-b-b- >> B tN T R << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 219, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> B tN T R << -e-e-e-e-e-e-e-e-e-e-e-

@@ -7240,8 +7124,7 @@ INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 227, 2, COUNT(*) FROM tt_1 UNIO
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 227, 2, COUNT(*) FROM tt_1 UNION SELECT 219, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tNe << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> T << -b-b-b-b-b-b-b-b-b-b-b-
@@ -7257,8 +7140,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -b-b-b-b-b-b-b-b-b-b-b- >> B tNe T R << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 227, 2, COUNT(*) FROM tt_1 UNION SELECT 219, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> B tNe T R << -e-e-e-e-e-e-e-e-e-e-e-

@@ -8439,8 +8321,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 261, 2, COUNT(*) FROM tt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 261, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
@@ -8457,8 +8338,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -b-b-b-b-b-b-b-b-b-b-b- >> B tN N C << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 261, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (261, 4)
@@ -8810,8 +8690,7 @@ INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 269, 2, COUNT(*) FROM tt_1 UNIO
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 269, 2, COUNT(*) FROM tt_1 UNION SELECT 268, 4, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tNe << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
@@ -8828,8 +8707,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -b-b-b-b-b-b-b-b-b-b-b- >> B tNe N C << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 269, 2, COUNT(*) FROM tt_1 UNION SELECT 268, 4, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (269, 4)
@@ -9035,8 +8913,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 275, 2, COUNT(*) FROM tt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 275, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
@@ -9055,8 +8932,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -b-b-b-b-b-b-b-b-b-b-b- >> B tN N R << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 275, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (275, 4)
@@ -9354,8 +9230,7 @@ INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 283, 2, COUNT(*) FROM tt_1 UNIO
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 283, 2, COUNT(*) FROM tt_1 UNION SELECT 282, 4, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tNe << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
@@ -9374,8 +9249,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -b-b-b-b-b-b-b-b-b-b-b- >> B tNe N R << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 283, 2, COUNT(*) FROM tt_1 UNION SELECT 282, 4, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (283, 4)
@@ -9597,8 +9471,7 @@ master-bin.000001	#	Query	#	#	COMMIT
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 289, 4, COUNT(*) FROM tt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 289, 4, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> C << -b-b-b-b-b-b-b-b-b-b-b-
@@ -9611,8 +9484,7 @@ master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (289, 2)
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 289, 4, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> B N tN C << -e-e-e-e-e-e-e-e-e-e-e-

@@ -9953,8 +9825,7 @@ INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 297, 4, COUNT(*) FROM tt_1 UNIO
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 297, 4, COUNT(*) FROM tt_1 UNION SELECT 297, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tNe << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> C << -b-b-b-b-b-b-b-b-b-b-b-
@@ -9967,8 +9838,7 @@ master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (297, 2)
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 297, 4, COUNT(*) FROM tt_1 UNION SELECT 297, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> B N tNe C << -e-e-e-e-e-e-e-e-e-e-e-

@@ -10177,8 +10047,7 @@ master-bin.000001	#	Query	#	#	COMMIT
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 303, 4, COUNT(*) FROM tt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 303, 4, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> R << -b-b-b-b-b-b-b-b-b-b-b-
@@ -10193,8 +10062,7 @@ master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (303, 2)
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 303, 4, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> B N tN R << -e-e-e-e-e-e-e-e-e-e-e-

@@ -10481,8 +10349,7 @@ INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 311, 4, COUNT(*) FROM tt_1 UNIO
 Got one of the listed errors
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 311, 4, COUNT(*) FROM tt_1 UNION SELECT 311, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tNe << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> R << -b-b-b-b-b-b-b-b-b-b-b-
@@ -10497,8 +10364,7 @@ master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (311, 2)
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 311, 4, COUNT(*) FROM tt_1 UNION SELECT 311, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> B N tNe R << -e-e-e-e-e-e-e-e-e-e-e-

@@ -11931,8 +11797,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 357, 2, COUNT(*) FROM tt_1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 357, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> tN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> CT << -b-b-b-b-b-b-b-b-b-b-b-
@@ -11956,8 +11821,7 @@ master-bin.000001	#	Query	#	#	ROLLBACK
 -b-b-b-b-b-b-b-b-b-b-b- >> B tN CT T R << -b-b-b-b-b-b-b-b-b-b-b-
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Table_map	#	#	table_id: # (test.nt_1)
-master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 357, 2, COUNT(*) FROM tt_1
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; CREATE TEMPORARY TABLE tt_xx_14 (a int) engine=Innodb

--- a/mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result
+++ b/mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result
@@ -391,8 +391,6 @@ master-bin.000001	#	Query	#	#	COMMIT
 #
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 23, 1, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 23, 1, COUNT(*) FROM tt_1
@@ -407,8 +405,6 @@ master-bin.000001	#	Query	#	#	COMMIT

 -b-b-b-b-b-b-b-b-b-b-b- >> nT << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO tt_1(trans_id, stmt_id, info) SELECT 24, 1, COUNT(*) FROM nt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_1(trans_id, stmt_id, info) SELECT 24, 1, COUNT(*) FROM nt_1
@@ -423,8 +419,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> NT << -b-b-b-b-b-b-b-b-b-b-b-
 UPDATE nt_3, tt_3 SET nt_3.info= "new text 25 --> 1", tt_3.info= "new text 25 --> 1" where nt_3.trans_id = tt_3.trans_id and tt_3.trans_id = 1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; UPDATE nt_3, tt_3 SET nt_3.info= "new text 25 --> 1", tt_3.info= "new text 25 --> 1" where nt_3.trans_id = tt_3.trans_id and tt_3.trans_id = 1
@@ -439,8 +433,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> NT-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_4(trans_id, stmt_id) VALUES (26, 1);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_4(trans_id, stmt_id) VALUES (26, 1)
@@ -455,8 +447,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> NT-func << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (27, 1, fc_i_tt_5_suc(27, 1));
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (27, 1, fc_i_tt_5_suc(27, 1))
@@ -471,8 +461,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> TN << -b-b-b-b-b-b-b-b-b-b-b-
 UPDATE tt_4, nt_4 SET tt_4.info= "new text 28 --> 1", nt_4.info= "new text 28 --> 1" where nt_4.trans_id = tt_4.trans_id and tt_4.trans_id = 1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; UPDATE tt_4, nt_4 SET tt_4.info= "new text 28 --> 1", nt_4.info= "new text 28 --> 1" where nt_4.trans_id = tt_4.trans_id and tt_4.trans_id = 1
@@ -487,8 +475,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> TN-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO tt_3(trans_id, stmt_id) VALUES (29, 1);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_3(trans_id, stmt_id) VALUES (29, 1)
@@ -503,8 +489,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> TN-func << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (30, 1, fc_i_nt_5_suc(30, 1));
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (30, 1, fc_i_nt_5_suc(30, 1))
@@ -6076,8 +6060,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 205, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 205, 2, COUNT(*) FROM tt_1
@@ -6518,8 +6500,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 219, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 219, 2, COUNT(*) FROM tt_1
@@ -7845,8 +7825,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 261, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 261, 2, COUNT(*) FROM tt_1
@@ -8311,8 +8289,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 275, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 275, 2, COUNT(*) FROM tt_1
@@ -8811,8 +8787,6 @@ master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> N << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 289, 4, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 289, 4, COUNT(*) FROM tt_1
@@ -9297,8 +9271,6 @@ master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> N << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 303, 4, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 303, 4, COUNT(*) FROM tt_1
@@ -10557,7 +10529,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 INSERT INTO nt_xx_9(trans_id, stmt_id, info) SELECT trans_id, stmt_id, USER() FROM tt_1;;
 Warnings:
 Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it uses a system function that may return a different value on the slave.
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_xx_9(trans_id, stmt_id, info) SELECT trans_id, stmt_id, USER() FROM tt_1
@@ -10966,8 +10937,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 357, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 357, 2, COUNT(*) FROM tt_1

--- a/mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result
+++ b/mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result
@@ -32,18 +32,12 @@ BEGIN;
 Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 BEGIN;
 Got one of the listed errors
 Got one of the listed errors
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 BEGIN;
 Got one of the listed errors
 Got one of the listed errors
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 source include/diff_master_slave.inc;
 ########################################################################################
 #                                     3 - BEGIN - COMMIT
@@ -55,8 +49,6 @@ BEGIN;
 Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 source include/diff_master_slave.inc;
 ########################################################################################
@@ -69,8 +61,6 @@ BEGIN;
 Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 ROLLBACK;
 Warnings:
 Warning	1196	Some non-transactional changed tables couldn't be rolled back
@@ -109,8 +99,6 @@ BEGIN;
 Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 ROLLBACK TO sv;
 Warnings:
 Warning	1196	Some non-transactional changed tables couldn't be rolled back
@@ -123,19 +111,11 @@ TRUNCATE TABLE t1;
 TRUNCATE TABLE t2;
 TRUNCATE TABLE t3;
 BEGIN;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 BEGIN;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Got one of the listed errors
 COMMIT;
 source include/diff_master_slave.inc;

--- a/mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result
+++ b/mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result
@@ -391,8 +391,6 @@ master-bin.000001	#	Query	#	#	COMMIT
 #
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 23, 1, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 23, 1, COUNT(*) FROM tt_1
@@ -407,8 +405,6 @@ master-bin.000001	#	Query	#	#	COMMIT

 -b-b-b-b-b-b-b-b-b-b-b- >> nT << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO tt_1(trans_id, stmt_id, info) SELECT 24, 1, COUNT(*) FROM nt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_1(trans_id, stmt_id, info) SELECT 24, 1, COUNT(*) FROM nt_1
@@ -423,8 +419,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> NT << -b-b-b-b-b-b-b-b-b-b-b-
 UPDATE nt_3, tt_3 SET nt_3.info= "new text 25 --> 1", tt_3.info= "new text 25 --> 1" where nt_3.trans_id = tt_3.trans_id and tt_3.trans_id = 1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; UPDATE nt_3, tt_3 SET nt_3.info= "new text 25 --> 1", tt_3.info= "new text 25 --> 1" where nt_3.trans_id = tt_3.trans_id and tt_3.trans_id = 1
@@ -439,8 +433,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> NT-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_4(trans_id, stmt_id) VALUES (26, 1);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_4(trans_id, stmt_id) VALUES (26, 1)
@@ -455,8 +447,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> NT-func << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (27, 1, fc_i_tt_5_suc(27, 1));
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id, info) VALUES (27, 1, fc_i_tt_5_suc(27, 1))
@@ -471,8 +461,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> TN << -b-b-b-b-b-b-b-b-b-b-b-
 UPDATE tt_4, nt_4 SET tt_4.info= "new text 28 --> 1", nt_4.info= "new text 28 --> 1" where nt_4.trans_id = tt_4.trans_id and tt_4.trans_id = 1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; UPDATE tt_4, nt_4 SET tt_4.info= "new text 28 --> 1", nt_4.info= "new text 28 --> 1" where nt_4.trans_id = tt_4.trans_id and tt_4.trans_id = 1
@@ -487,8 +475,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> TN-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO tt_3(trans_id, stmt_id) VALUES (29, 1);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_3(trans_id, stmt_id) VALUES (29, 1)
@@ -503,8 +489,6 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */

 -b-b-b-b-b-b-b-b-b-b-b- >> TN-func << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (30, 1, fc_i_nt_5_suc(30, 1));
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tt_5(trans_id, stmt_id, info) VALUES (30, 1, fc_i_nt_5_suc(30, 1))
@@ -3615,8 +3599,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (133, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (133, 4)
@@ -3649,8 +3631,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id) VALUES (134, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id) VALUES (134, 4)
@@ -3755,8 +3735,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (137, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (137, 4)
@@ -3789,8 +3767,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id) VALUES (138, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id) VALUES (138, 4)
@@ -3897,8 +3873,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (141, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (141, 4)
@@ -3933,8 +3907,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id) VALUES (142, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id) VALUES (142, 4)
@@ -4043,8 +4015,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-proc << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (145, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (145, 4)
@@ -4079,8 +4049,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-proc << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id) VALUES (146, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id) VALUES (146, 4)
@@ -4329,8 +4297,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (153, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (153, 4)
@@ -4365,8 +4331,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id) VALUES (154, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id) VALUES (154, 4)
@@ -4477,8 +4441,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (157, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (157, 4)
@@ -4513,8 +4475,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id) VALUES (158, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id) VALUES (158, 4)
@@ -4627,8 +4587,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (161, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (161, 4)
@@ -4665,8 +4623,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id) VALUES (162, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id) VALUES (162, 4)
@@ -4781,8 +4737,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-proc << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (165, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (165, 4)
@@ -4819,8 +4773,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T-proc << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N-trig << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_5(trans_id, stmt_id) VALUES (166, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_5(trans_id, stmt_id) VALUES (166, 4)
@@ -6244,8 +6196,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 205, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 205, 2, COUNT(*) FROM tt_1
@@ -6686,8 +6636,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 219, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 219, 2, COUNT(*) FROM tt_1
@@ -8029,8 +7977,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 261, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 261, 2, COUNT(*) FROM tt_1
@@ -8069,8 +8015,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> nT << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (262, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (262, 4)
@@ -8105,8 +8049,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NT << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (263, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (263, 4)
@@ -8141,8 +8083,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NT-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (264, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (264, 4)
@@ -8177,8 +8117,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NT-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (265, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (265, 4)
@@ -8213,8 +8151,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (266, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (266, 4)
@@ -8249,8 +8185,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TN-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (267, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (267, 4)
@@ -8285,8 +8219,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TN-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (268, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (268, 4)
@@ -8392,8 +8324,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NeT-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (271, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (271, 4)
@@ -8427,8 +8357,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NeT-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (272, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (272, 4)
@@ -8462,8 +8390,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TeN-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (273, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (273, 4)
@@ -8497,8 +8423,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TeN-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (274, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (274, 4)
@@ -8539,8 +8463,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 275, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 275, 2, COUNT(*) FROM tt_1
@@ -8581,8 +8503,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> nT << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (276, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (276, 4)
@@ -8619,8 +8539,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NT << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (277, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (277, 4)
@@ -8657,8 +8575,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NT-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (278, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (278, 4)
@@ -8695,8 +8611,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NT-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (279, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (279, 4)
@@ -8733,8 +8647,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TN << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (280, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (280, 4)
@@ -8771,8 +8683,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TN-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (281, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (281, 4)
@@ -8809,8 +8719,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TN-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (282, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (282, 4)
@@ -8922,8 +8830,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NeT-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (285, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (285, 4)
@@ -8959,8 +8865,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> NeT-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (286, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (286, 4)
@@ -8996,8 +8900,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TeN-trig << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (287, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (287, 4)
@@ -9033,8 +8935,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> TeN-func << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (288, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (288, 4)
@@ -9083,8 +8983,6 @@ master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> N << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 289, 4, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 289, 4, COUNT(*) FROM tt_1
@@ -9569,8 +9467,6 @@ master-bin.000001	#	Query	#	#	COMMIT
 -e-e-e-e-e-e-e-e-e-e-e- >> N << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 303, 4, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 303, 4, COUNT(*) FROM tt_1
@@ -10158,8 +10054,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> T << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (319, 4);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (319, 4)
@@ -10216,8 +10110,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> S1 << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> N << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id) VALUES (320, 5);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id) VALUES (320, 5)
@@ -10845,7 +10737,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 INSERT INTO nt_xx_9(trans_id, stmt_id, info) SELECT trans_id, stmt_id, USER() FROM tt_1;;
 Warnings:
 Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it uses a system function that may return a different value on the slave.
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_xx_9(trans_id, stmt_id, info) SELECT trans_id, stmt_id, USER() FROM tt_1
@@ -10949,7 +10840,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 INSERT INTO nt_xx_10(trans_id, stmt_id, info) SELECT trans_id, stmt_id, USER() FROM nt_1;;
 Warnings:
 Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it uses a system function that may return a different value on the slave.
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_xx_10(trans_id, stmt_id, info) SELECT trans_id, stmt_id, USER() FROM nt_1
@@ -11262,8 +11152,6 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 -e-e-e-e-e-e-e-e-e-e-e- >> B << -e-e-e-e-e-e-e-e-e-e-e-
 -b-b-b-b-b-b-b-b-b-b-b- >> tN << -b-b-b-b-b-b-b-b-b-b-b-
 INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 357, 2, COUNT(*) FROM tt_1;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO nt_1(trans_id, stmt_id, info) SELECT 357, 2, COUNT(*) FROM tt_1

--- a/mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result
+++ b/mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result
@@ -52,8 +52,6 @@ include/start_slave.inc
 set @@global.debug="+d,stop_slave_middle_group";
 set @@global.debug="+d,incomplete_group_in_relay_log";
 update tm as t1, ti as t2 set t1.a=t1.a * 2, t2.a=t2.a * 2;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 SELECT "Fatal error: ... The slave SQL is stopped, leaving the current group of events unfinished with a non-transaction table changed. If the group consists solely of Row-based events, you can try restarting the slave with --slave-exec-mode=IDEMPOTENT, which ignores duplicate key, key not found, and similar errors (see documentation for details)." AS Last_SQL_Error, @check as `true`;
 Last_SQL_Error	true
 Fatal error: ... The slave SQL is stopped, leaving the current group of events unfinished with a non-transaction table changed. If the group consists solely of Row-based events, you can try restarting the slave with --slave-exec-mode=IDEMPOTENT, which ignores duplicate key, key not found, and similar errors (see documentation for details).	1

--- a/mysql-test/suite/rpl/r/rpl_temp_temporary.result
+++ b/mysql-test/suite/rpl/r/rpl_temp_temporary.result
@@ -23,8 +23,6 @@ CREATE TEMPORARY TABLE t_innodb_temp(id int) engine= Innodb;
 INSERT INTO t_innodb_temp VALUES(1);
 BEGIN;
 INSERT INTO t_myisam SELECT * FROM t_myisam_temp;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 INSERT INTO t_innodb SELECT * FROM t_myisam_temp;
 INSERT INTO t_innodb SELECT * FROM t_innodb_temp;
 ROLLBACK;
@@ -32,8 +30,6 @@ Warnings:
 Warning	1196	Some non-transactional changed tables couldn't be rolled back
 BEGIN;
 INSERT INTO t_myisam SELECT * FROM t_innodb_temp;
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
 INSERT INTO t_innodb SELECT * FROM t_myisam_temp;
 INSERT INTO t_innodb SELECT * FROM t_innodb_temp;
 ROLLBACK;
@@ -61,11 +57,15 @@ show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_myisam SELECT * FROM t_myisam_temp
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_innodb SELECT * FROM t_myisam_temp
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_innodb SELECT * FROM t_innodb_temp
 master-bin.000001	#	Query	#	#	ROLLBACK
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_myisam SELECT * FROM t_innodb_temp
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_innodb SELECT * FROM t_myisam_temp
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_innodb SELECT * FROM t_innodb_temp
 master-bin.000001	#	Query	#	#	ROLLBACK
@@ -185,12 +185,8 @@ BEGIN;
 INSERT INTO t_myisam VALUES(CONNECTION_ID());
 INSERT INTO tmp1 VALUES(1);
 INSERT INTO t_myisam VALUES(1);
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 INSERT INTO t_innodb VALUES(1);
 INSERT INTO t_myisam VALUES(CONNECTION_ID());
-Warnings:
-Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 INSERT INTO t_innodb VALUES(1);
 COMMIT;
 show binlog events from <binlog_start>;
@@ -202,13 +198,15 @@ master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_myisam VALUES(CONNECTION_ID())
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tmp1 VALUES(1)
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_myisam VALUES(1)
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_myisam VALUES(CONNECTION_ID())
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Query	#	#	use `test`; INSERT INTO tmp1 VALUES(1)
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_innodb VALUES(1)
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t_innodb VALUES(1)
 master-bin.000001	#	Xid	#	#	COMMIT /* XID */

--- a/mysql-test/suite/rpl/t/rpl_non_direct_mixed_mixing_engines.test
+++ b/mysql-test/suite/rpl/t/rpl_non_direct_mixed_mixing_engines.test
@@ -11,5 +11,3 @@ SET SESSION binlog_direct_non_transactional_updates = OFF;
 --enable_query_log
 let $engine_type=Innodb;
 --source extra/rpl_tests/rpl_mixing_engines.test
-
--diff_files suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result suite/rpl/r/rpl_mixed_mixing_engines.result
--- a/mysql-test/t/innodb_mysql_lock2.test
+++ b/mysql-test/t/innodb_mysql_lock2.test
@@ -12,6 +12,10 @@
 # Save the initial number of concurrent sessions.
 --source include/count_sessions.inc

+--disable_query_log
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
+--enable_query_log
+
 --echo #
 --echo # Test how do we handle locking in various cases when
 --echo # we read data from InnoDB tables.

--- a/sql/log.cc
+++ b/sql/log.cc
@@ -209,7 +209,7 @@ class binlog_cache_data
 {
 public:
  binlog_cache_data(): m_pending(0), before_stmt_pos(MY_OFF_T_UNDEF),
-  incident(FALSE)
+  incident(FALSE), changes_to_non_trans_temp_table_flag(FALSE)
  {
    cache_log.end_of_file= max_binlog_cache_size;
  }
@@ -245,9 +245,20 @@ class binlog_cache_data
    return(incident);
  }

+  void set_changes_to_non_trans_temp_table()
+  {
+    changes_to_non_trans_temp_table_flag= TRUE;    
+  }
+
+  bool changes_to_non_trans_temp_table()
+  {
+    return (changes_to_non_trans_temp_table_flag);    
+  }
+
  void reset()
  {
    truncate(0);
+    changes_to_non_trans_temp_table_flag= FALSE;
    incident= FALSE;
    before_stmt_pos= MY_OFF_T_UNDEF;
    cache_log.end_of_file= max_binlog_cache_size;
@@ -304,6 +315,12 @@ class binlog_cache_data
  */ 
  bool incident;

+  /*
+    This flag indicates if the cache has changes to temporary tables.
+    @TODO This a temporary fix and should be removed after BUG#54562.
+  */
+  bool changes_to_non_trans_temp_table_flag;
+
  /*
    It truncates the cache to a certain position. This includes deleting the
    pending event.
@@ -1772,13 +1789,23 @@ static int binlog_rollback(handlerton *hton, THD *thd, bool all)
    /*
      We flush the cache wrapped in a beging/rollback if:
        . aborting a single or multi-statement transaction and;
-        . the format is STMT and non-trans engines were updated or;
-        . the OPTION_KEEP_LOG is activate.
+        . the OPTION_KEEP_LOG is active or;
+        . the format is STMT and a non-trans table was updated or;
+        . the format is MIXED and a temporary non-trans table was
+          updated or;
+        . the format is MIXED, non-trans table was updated and
+          aborting a single statement transaction;
    */
+
    if (ending_trans(thd, all) &&
        ((thd->variables.option_bits & OPTION_KEEP_LOG) ||
         (trans_has_updated_non_trans_table(thd) &&
-          thd->variables.binlog_format == BINLOG_FORMAT_STMT)))
+          thd->variables.binlog_format == BINLOG_FORMAT_STMT) ||
+         (cache_mngr->trx_cache.changes_to_non_trans_temp_table() &&
+          thd->variables.binlog_format == BINLOG_FORMAT_MIXED) ||
+         (trans_has_updated_non_trans_table(thd) &&
+          ending_single_stmt_trans(thd,all) &&
+          thd->variables.binlog_format == BINLOG_FORMAT_MIXED)))
    {
      Query_log_event qev(thd, STRING_WITH_LEN("ROLLBACK"), TRUE, FALSE, TRUE, 0);
      error= binlog_flush_trx_cache(thd, cache_mngr, &qev);
@@ -1786,13 +1813,17 @@ static int binlog_rollback(handlerton *hton, THD *thd, bool all)
    /*
      Truncate the cache if:
        . aborting a single or multi-statement transaction or;
-        . the OPTION_KEEP_LOG is not activate and;
-        . the format is not STMT or no non-trans were updated.
+        . the OPTION_KEEP_LOG is not active and;
+        . the format is not STMT or no non-trans was updated and;
+        . the format is not MIXED or no temporary non-trans was
+          updated.
    */
    else if (ending_trans(thd, all) ||
             (!(thd->variables.option_bits & OPTION_KEEP_LOG) &&
-              ((!stmt_has_updated_non_trans_table(thd) ||
-               thd->variables.binlog_format != BINLOG_FORMAT_STMT))))
+              (!stmt_has_updated_non_trans_table(thd) ||
+               thd->variables.binlog_format != BINLOG_FORMAT_STMT) &&
+              (!cache_mngr->trx_cache.changes_to_non_trans_temp_table() ||
+               thd->variables.binlog_format != BINLOG_FORMAT_MIXED)))
      error= binlog_truncate_trx_cache(thd, cache_mngr, all);
  }

@@ -4254,7 +4285,23 @@ bool use_trans_cache(const THD* thd, bool is_transactional)
 */
 bool ending_trans(THD* thd, const bool all)
 {
-  return (all || (!all && !thd->in_multi_stmt_transaction_mode()));
+  return (all || ending_single_stmt_trans(thd, all));
+}
+
+/**
+  This function checks if a single statement transaction is about
+  to commit or not.
+
+  @param thd The client thread that executed the current statement.
+  @param all Committing a transaction (i.e. TRUE) or a statement
+             (i.e. FALSE).
+  @return
+    @c true if committing a single statement transaction, otherwise
+    @c false.
+*/
+bool ending_single_stmt_trans(THD* thd, const bool all)
+{
+  return (!all && !thd->in_multi_stmt_transaction_mode());
 }

 /**
@@ -4653,6 +4700,9 @@ bool MYSQL_BIN_LOG::write(Log_event *event_info)
      file= cache_mngr->get_binlog_cache_log(is_trans_cache);
      cache_data= cache_mngr->get_binlog_cache_data(is_trans_cache);

+      if (thd->stmt_accessed_non_trans_temp_table())
+        cache_data->set_changes_to_non_trans_temp_table();
+
      thd->binlog_start_trans_and_stmt();
    }
    DBUG_PRINT("info",("event type: %d",event_info->get_type_code()));

--- a/sql/log.h
+++ b/sql/log.h
@@ -27,6 +27,7 @@ bool trans_has_updated_trans_table(const THD* thd);
 bool stmt_has_updated_trans_table(const THD *thd);
 bool use_trans_cache(const THD* thd, bool is_transactional);
 bool ending_trans(THD* thd, const bool all);
+bool ending_single_stmt_trans(THD* thd, const bool all);
 bool trans_has_updated_non_trans_table(const THD* thd);
 bool stmt_has_updated_non_trans_table(const THD* thd);


--- a/sql/log_event.cc
+++ b/sql/log_event.cc
@@ -678,8 +678,9 @@ Log_event::Log_event(THD* thd_arg, uint16 flags_arg, bool using_trans)
 {
  server_id=	thd->server_id;
  when=		thd->start_time;
-  cache_type= (using_trans || stmt_has_updated_trans_table(thd)
-               || thd->thread_temporary_used
+  cache_type= ((using_trans || stmt_has_updated_trans_table(thd) ||
+               (thd->stmt_accessed_temp_table() &&
+               trans_has_updated_trans_table(thd)))
               ? Log_event::EVENT_TRANSACTIONAL_CACHE :
               Log_event::EVENT_STMT_CACHE);
 }
@@ -2519,8 +2520,9 @@ Query_log_event::Query_log_event(THD* thd_arg, const char* query_arg,
  }
  else
  {
-    cache_type= ((using_trans || stmt_has_updated_trans_table(thd)
-                  || trx_cache || thd->thread_temporary_used)
+    cache_type= ((using_trans || stmt_has_updated_trans_table(thd) || trx_cache ||
+                 (thd->stmt_accessed_temp_table() &&
+                 trans_has_updated_trans_table(thd)))
                 ? Log_event::EVENT_TRANSACTIONAL_CACHE :
                 Log_event::EVENT_STMT_CACHE);
  }

--- a/sql/sql_class.cc
+++ b/sql/sql_class.cc
@@ -493,7 +493,9 @@ THD::THD()
   rli_fake(0),
   lock_id(&main_lock_id),
   user_time(0), in_sub_stmt(0),
-   binlog_unsafe_warning_flags(0), binlog_table_maps(0),
+   binlog_unsafe_warning_flags(0),
+   stmt_accessed_table_flag(0),
+   binlog_table_maps(0),
   table_map_for_update(0),
   arg_of_last_insert_id_function(FALSE),
   first_successful_insert_id_in_prev_stmt(0),
@@ -537,7 +539,7 @@ THD::THD()
  count_cuted_fields= CHECK_FIELD_IGNORE;
  killed= NOT_KILLED;
  col_access=0;
-  is_slave_error= thread_specific_used= thread_temporary_used= FALSE;
+  is_slave_error= thread_specific_used= FALSE;
  my_hash_clear(&handler_tables_hash);
  tmp_table=0;
  used_tables=0;
@@ -3663,7 +3665,7 @@ int THD::decide_logging_format(TABLE_LIST *tables)
      capabilities.
    */
    handler::Table_flags flags_write_some_set= 0;
-    handler::Table_flags flags_some_set= 0;
+    handler::Table_flags flags_access_some_set= 0;
    handler::Table_flags flags_write_all_set=
      HA_BINLOG_ROW_CAPABLE | HA_BINLOG_STMT_CAPABLE;

@@ -3678,17 +3680,7 @@ int THD::decide_logging_format(TABLE_LIST *tables)
       Innodb and Falcon; Innodb and MyIsam.
    */
    my_bool multi_access_engine= FALSE;
-    /*
-       If non-transactional and transactional engines are about
-       to be accessed and any of them is about to be updated.
-       For example: Innodb and MyIsam.
-    */
-    my_bool trans_non_trans_access_engines= FALSE;
-    /*
-       If all engines that are about to be updated are
-       transactional.
-    */
-    my_bool all_trans_write_engines= TRUE;
+
    TABLE* prev_write_table= NULL;
    TABLE* prev_access_table= NULL;

@@ -3712,9 +3704,12 @@ int THD::decide_logging_format(TABLE_LIST *tables)
    {
      if (table->placeholder())
        continue;
+
      if (table->table->s->table_category == TABLE_CATEGORY_PERFORMANCE)
        lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_SYSTEM_TABLE);
+
      handler::Table_flags const flags= table->table->file->ha_table_flags();
+
      DBUG_PRINT("info", ("table: %s; ha_table_flags: 0x%llx",
                          table->table_name, flags));
      if (table->lock_type >= TL_WRITE_ALLOW_WRITE)
@@ -3722,177 +3717,171 @@ int THD::decide_logging_format(TABLE_LIST *tables)
        if (prev_write_table && prev_write_table->file->ht !=
            table->table->file->ht)
          multi_write_engine= TRUE;
-        /*
-          Every temporary table must be always written to the binary
-          log in transaction boundaries and as such we artificially
-          classify them as transactional.
-
-          Indirectly, this avoids classifying a temporary table created
-          on a non-transactional engine as unsafe when it is modified
-          after any transactional table:

-          BEGIN;
-            INSERT INTO innodb_t VALUES (1);
-            INSERT INTO myisam_t_temp VALUES (1);
-          COMMIT;
+        my_bool trans= table->table->file->has_transactions();

-          BINARY LOG:
+        if (table->table->s->tmp_table)
+          set_stmt_accessed_table(trans ? STMT_WRITES_TEMP_TRANS_TABLE :
+                                          STMT_WRITES_TEMP_NON_TRANS_TABLE);
+        else
+          set_stmt_accessed_table(trans ? STMT_WRITES_TRANS_TABLE :
+                                          STMT_WRITES_NON_TRANS_TABLE);

-          BEGIN;
-            INSERT INTO innodb_t VALUES (1);
-            INSERT INTO myisam_t_temp VALUES (1);
-          COMMIT;
-        */
-        all_trans_write_engines= all_trans_write_engines &&
-                                 (table->table->file->has_transactions() ||
-                                  table->table->s->tmp_table);
-        prev_write_table= table->table;
        flags_write_all_set &= flags;
        flags_write_some_set |= flags;
-      }
-      flags_some_set |= flags;
-      /*
-        The mixture of non-transactional and transactional tables must
-        identified and classified as unsafe. However, a temporary table
-        must be always handled as a transactional table. Based on that,
-        we have the following statements classified as mixed and by
-        consequence as unsafe:

-        1: INSERT INTO myisam_t SELECT * FROM innodb_t;
-
-        2: INSERT INTO innodb_t SELECT * FROM myisam_t;
-
-        3: INSERT INTO myisam_t SELECT * FROM myisam_t_temp;
-
-        4: INSERT INTO myisam_t_temp SELECT * FROM myisam_t;
-
-        5: CREATE TEMPORARY TABLE myisam_t_temp SELECT * FROM mysiam_t;
-
-        The following statements are not considered mixed and as such
-        are safe:
-
-        1: INSERT INTO innodb_t SELECT * FROM myisam_t_temp;
+        prev_write_table= table->table;
+      }
+      flags_access_some_set |= flags;

-        2: INSERT INTO myisam_t_temp SELECT * FROM innodb_t_temp;
-      */
-      if (!trans_non_trans_access_engines && prev_access_table &&
-          (lex->sql_command != SQLCOM_CREATE_TABLE ||
+      if (lex->sql_command != SQLCOM_CREATE_TABLE ||
          (lex->sql_command == SQLCOM_CREATE_TABLE &&
-          (lex->create_info.options & HA_LEX_CREATE_TMP_TABLE))))
+          (lex->create_info.options & HA_LEX_CREATE_TMP_TABLE)))
      {
-        my_bool prev_trans;
-        my_bool act_trans;
-        if (prev_access_table->s->tmp_table || table->table->s->tmp_table)
-        {
-          prev_trans= prev_access_table->s->tmp_table ? TRUE :
-                     prev_access_table->file->has_transactions();
-          act_trans= table->table->s->tmp_table ? TRUE :
-                    table->table->file->has_transactions();
-        }
+        my_bool trans= table->table->file->has_transactions();
+
+        if (table->table->s->tmp_table)
+          set_stmt_accessed_table(trans ? STMT_READS_TEMP_TRANS_TABLE :
+                                          STMT_READS_TEMP_NON_TRANS_TABLE);
        else
-        {
-          prev_trans= prev_access_table->file->has_transactions();
-          act_trans= table->table->file->has_transactions();
-        }
-        trans_non_trans_access_engines= (prev_trans != act_trans);
-        multi_access_engine= TRUE;
+          set_stmt_accessed_table(trans ? STMT_READS_TRANS_TABLE :
+                                          STMT_READS_NON_TRANS_TABLE);
      }
-      thread_temporary_used |= table->table->s->tmp_table;
+
+      if (prev_access_table && prev_access_table->file->ht !=
+          table->table->file->ht)
+        multi_access_engine= TRUE;
+
      prev_access_table= table->table;
    }

    DBUG_PRINT("info", ("flags_write_all_set: 0x%llx", flags_write_all_set));
    DBUG_PRINT("info", ("flags_write_some_set: 0x%llx", flags_write_some_set));
-    DBUG_PRINT("info", ("flags_some_set: 0x%llx", flags_some_set));
+    DBUG_PRINT("info", ("flags_access_some_set: 0x%llx", flags_access_some_set));
    DBUG_PRINT("info", ("multi_write_engine: %d", multi_write_engine));
    DBUG_PRINT("info", ("multi_access_engine: %d", multi_access_engine));
-    DBUG_PRINT("info", ("trans_non_trans_access_engines: %d",
-                        trans_non_trans_access_engines));

    int error= 0;
    int unsafe_flags;

    /*
-      Set the statement as unsafe if:
-
-      . it is a mixed statement, i.e. access transactional and non-transactional
-      tables, and update any of them;
-
-      or:
-
-      . an early statement updated a transactional table;
-      . and, the current statement updates a non-transactional table.
-
-      Any mixed statement is classified as unsafe to ensure that mixed mode is
-      completely safe. Consider the following example to understand why we
-      decided to do this:
-
-      Note that mixed statements such as
-
-      1: INSERT INTO myisam_t SELECT * FROM innodb_t;
-
-      2: INSERT INTO innodb_t SELECT * FROM myisam_t;
-
-      3: INSERT INTO myisam_t SELECT * FROM myisam_t_temp;
-
-      4: INSERT INTO myisam_t_temp SELECT * FROM myisam_t;
-
-      5: CREATE TEMPORARY TABLE myisam_t_temp SELECT * FROM mysiam_t;
-
-      are classified as unsafe to ensure that in mixed mode the execution is
-      completely safe and equivalent to the row mode. Consider the following
-      statements and sessions (connections) to understand the reason:
-
-      con1: INSERT INTO innodb_t VALUES (1);
-      con1: INSERT INTO innodb_t VALUES (100);
+      Classify a statement as unsafe when there is a mixed statement and an
+      on-going transaction at any point of the execution if:

-      con1: BEGIN
-      con2: INSERT INTO myisam_t SELECT * FROM innodb_t;
-      con1: INSERT INTO innodb_t VALUES (200);
-      con1: COMMIT;
+        1. The mixed statement is about to update a transactional table and
+        a non-transactional table.

-      The point is that the concurrent statements may be written into the binary log
-      in a way different from the execution. For example,
+        2. The mixed statement is about to update a temporary transactional
+        table and a non-transactional table.
+      
+        3. The mixed statement is about to update a transactional table and
+        read from a non-transactional table.

-      BINARY LOG:
+        4. The mixed statement is about to update a temporary transactional
+        table and read from a non-transactional table.

-      con2: BEGIN;
-      con2: INSERT INTO myisam_t SELECT * FROM innodb_t;
-      con2: COMMIT;
-      con1: BEGIN
-      con1: INSERT INTO innodb_t VALUES (200);
-      con1: COMMIT;
+        5. The mixed statement is about to update a non-transactional table
+        and read from a transactional table when the isolation level is
+        lower than repeatable read.

-      ....
+      After updating a transactional table if:

-      or
-
-      BINARY LOG:
-
-      con1: BEGIN
-      con1: INSERT INTO innodb_t VALUES (200);
-      con1: COMMIT;
-      con2: BEGIN;
-      con2: INSERT INTO myisam_t SELECT * FROM innodb_t;
-      con2: COMMIT;
-
-      Clearly, this may become a problem in STMT mode and setting the statement
-      as unsafe will make rows to be written into the binary log in MIXED mode
-      and as such the problem will not stand.
-
-      In STMT mode, although such statement is classified as unsafe, i.e.
+        6. The mixed statement is about to update a non-transactional table
+        and read from a temporary transactional table.
+ 
+        7. The mixed statement is about to update a non-transactional table
+        and read from a temporary transactional table.
+
+        8. The mixed statement is about to update a non-transactionala table
+        and read from a temporary non-transactional table.
+     
+        9. The mixed statement is about to update a temporary non-transactional
+        table and update a non-transactional table.
+     
+        10. The mixed statement is about to update a temporary non-transactional
+        table and read from a non-transactional table.
+     
+        11. A statement is about to update a non-transactional table and the
+        option variables.binlog_direct_non_trans_update is OFF.
+
+      The reason for this is that locks acquired may not protected a concurrent
+      transaction of interfering in the current execution and by consequence in
+      the result. In particular, if there is an on-going transaction and a
+      transactional table was already updated, a temporary table must be written
+      to the binary log in the boundaries of the on-going transaction and as
+      such we artificially classify them as transactional.
+    */
+    if (in_multi_stmt_transaction_mode())
+    {
+      my_bool mixed_unsafe= FALSE;
+      my_bool non_trans_unsafe= FALSE;
+
+      /* Case 1. */
+      if (stmt_accessed_table(STMT_WRITES_TRANS_TABLE) &&
+          stmt_accessed_table(STMT_WRITES_NON_TRANS_TABLE))
+        mixed_unsafe= TRUE;
+      /* Case 2. */
+      else if (stmt_accessed_table(STMT_WRITES_TEMP_TRANS_TABLE) &&
+               stmt_accessed_table(STMT_WRITES_NON_TRANS_TABLE))
+        mixed_unsafe= TRUE;
+      /* Case 3. */
+      else if (stmt_accessed_table(STMT_WRITES_TRANS_TABLE) &&
+               stmt_accessed_table(STMT_READS_NON_TRANS_TABLE))
+        mixed_unsafe= TRUE;
+      /* Case 4. */
+      else if (stmt_accessed_table(STMT_WRITES_TEMP_TRANS_TABLE) &&
+               stmt_accessed_table(STMT_READS_NON_TRANS_TABLE))
+        mixed_unsafe= TRUE;
+      /* Case 5. */
+      else if (stmt_accessed_table(STMT_WRITES_NON_TRANS_TABLE) &&
+               stmt_accessed_table(STMT_READS_TRANS_TABLE) &&
+               tx_isolation < ISO_REPEATABLE_READ)
+        /*
+           By default, InnoDB operates in REPEATABLE READ and with the option
+           --innodb-locks-unsafe-for-binlog disabled. In this case, InnoDB uses
+           next-key locks for searches and index scans, which prevents phantom
+           rows.
+ 
+           This is scenario is safe for Innodb. However, there are no means to
+           transparently get this information. Therefore, we need to improve this
+           and change the storage engines to report somehow when an execution is
+           safe under an isolation level & binary logging format.
+        */
+        mixed_unsafe= TRUE;

-      INSERT INTO myisam_t SELECT * FROM innodb_t;
+      if (trans_has_updated_trans_table(this))
+      {
+        /* Case 6. */
+        if (stmt_accessed_table(STMT_WRITES_NON_TRANS_TABLE) &&
+            stmt_accessed_table(STMT_READS_TRANS_TABLE))
+          mixed_unsafe= TRUE;
+        /* Case 7. */
+        else if (stmt_accessed_table(STMT_WRITES_NON_TRANS_TABLE) &&
+                 stmt_accessed_table(STMT_READS_TEMP_TRANS_TABLE))
+          mixed_unsafe= TRUE;
+        /* Case 8. */
+        else if (stmt_accessed_table(STMT_WRITES_NON_TRANS_TABLE) &&
+                 stmt_accessed_table(STMT_READS_TEMP_NON_TRANS_TABLE))
+          mixed_unsafe= TRUE;
+        /* Case 9. */
+        else if (stmt_accessed_table(STMT_WRITES_TEMP_NON_TRANS_TABLE) &&
+                 stmt_accessed_table(STMT_WRITES_NON_TRANS_TABLE))
+          mixed_unsafe= TRUE;
+        /* Case 10. */
+        else if (stmt_accessed_table(STMT_WRITES_TEMP_NON_TRANS_TABLE) &&
+                 stmt_accessed_table(STMT_READS_NON_TRANS_TABLE))
+        mixed_unsafe= TRUE;
+        /* Case 11. */
+        else if (!variables.binlog_direct_non_trans_update &&
+                 stmt_accessed_table(STMT_WRITES_NON_TRANS_TABLE))
+          non_trans_unsafe= TRUE;
+      }

-      there is no enough information to avoid writing it outside the boundaries
-      of a transaction. This is not a problem if we are considering snapshot
-      isolation level but if we have pure repeatable read or serializable the
-      lock history on the slave will be different from the master.
-    */
-    if (trans_non_trans_access_engines)
-      lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_MIXED_STATEMENT);
-    else if (trans_has_updated_trans_table(this) && !all_trans_write_engines)
-      lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_NONTRANS_AFTER_TRANS);
+      if (mixed_unsafe)
+        lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_MIXED_STATEMENT);
+      else if (non_trans_unsafe)
+        lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_NONTRANS_AFTER_TRANS);
+    }

    /*
      If more than one engine is involved in the statement and at
@@ -3904,7 +3893,7 @@ int THD::decide_logging_format(TABLE_LIST *tables)
        (flags_write_some_set & HA_HAS_OWN_BINLOGGING))
      my_error((error= ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE),
               MYF(0));
-    else if (multi_access_engine && flags_some_set & HA_HAS_OWN_BINLOGGING)
+    else if (multi_access_engine && flags_access_some_set & HA_HAS_OWN_BINLOGGING)
      lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE);

    /* both statement-only and row-only engines involved */

--- a/sql/sql_class.h
+++ b/sql/sql_class.h
@@ -1566,6 +1566,125 @@ class THD :public Statement,
    return current_stmt_binlog_format == BINLOG_FORMAT_ROW;
  }

+  enum enum_stmt_accessed_table
+  {
+    /*
+       If a transactional table is about to be read. Note that
+       a write implies a read.
+    */
+    STMT_READS_TRANS_TABLE= 0,
+    /*
+       If a transactional table is about to be updated.
+    */
+    STMT_WRITES_TRANS_TABLE,
+    /*
+       If a non-transactional table is about to be read. Note that
+       a write implies a read.
+    */
+    STMT_READS_NON_TRANS_TABLE,
+    /*
+       If a non-transactional table is about to be updated.
+    */
+    STMT_WRITES_NON_TRANS_TABLE,
+    /*
+       If a temporary transactional table is about to be read. Note
+       that a write implies a read.
+    */
+    STMT_READS_TEMP_TRANS_TABLE,
+    /*
+       If a temporary transactional table is about to be updated.
+    */
+    STMT_WRITES_TEMP_TRANS_TABLE,
+    /*
+       If a temporary non-transactional table is about to be read. Note
+      that a write implies a read.
+    */
+    STMT_READS_TEMP_NON_TRANS_TABLE,
+    /*
+       If a temporary non-transactional table is about to be updated.
+    */
+    STMT_WRITES_TEMP_NON_TRANS_TABLE,
+    /*
+      The last element of the enumeration. Please, if necessary add
+      anything before this.
+    */
+    STMT_ACCESS_TABLE_COUNT
+  };
+
+  /**
+    Sets the type of table that is about to be accessed while executing a
+    statement.
+
+    @param accessed_table Enumeration type that defines the type of table,
+                           e.g. temporary, transactional, non-transactional.
+  */
+  inline void set_stmt_accessed_table(enum_stmt_accessed_table accessed_table)
+  {
+    DBUG_ENTER("THD::set_stmt_accessed_table");
+
+    DBUG_ASSERT(accessed_table >= 0 && accessed_table < STMT_ACCESS_TABLE_COUNT);
+    stmt_accessed_table_flag |= (1U << accessed_table);
+
+    DBUG_VOID_RETURN;
+  }
+
+  /**
+    Checks if a type of table is about to be accessed while executing a
+    statement.
+
+    @param accessed_table Enumeration type that defines the type of table,
+                           e.g. temporary, transactional, non-transactional.
+
+    @return
+      @retval TRUE  if the type of the table is about to be accessed
+      @retval FALSE otherwise
+  */
+  inline bool stmt_accessed_table(enum_stmt_accessed_table accessed_table)
+  {
+    DBUG_ENTER("THD::stmt_accessed_table");
+
+    DBUG_ASSERT(accessed_table >= 0 && accessed_table < STMT_ACCESS_TABLE_COUNT);
+
+    DBUG_RETURN((stmt_accessed_table_flag & (1U << accessed_table)) != 0);
+  }
+
+  /**
+    Checks if a temporary table is about to be accessed while executing a
+    statement.
+
+    @return
+      @retval TRUE  if a temporary table is about to be accessed
+      @retval FALSE otherwise
+  */
+  inline bool stmt_accessed_temp_table()
+  {
+    DBUG_ENTER("THD::stmt_accessed_temp_table");
+
+    DBUG_RETURN((stmt_accessed_table_flag &
+                ((1U << STMT_READS_TEMP_TRANS_TABLE) |
+                 (1U << STMT_WRITES_TEMP_TRANS_TABLE) |
+                 (1U << STMT_READS_TEMP_NON_TRANS_TABLE) |
+                 (1U << STMT_WRITES_TEMP_NON_TRANS_TABLE))) != 0);
+  }
+
+  /**
+    Checks if a temporary non-transactional table is about to be accessed
+    while executing a statement.
+
+    @return
+      @retval TRUE  if a temporary non-transactional table is about to be
+                    accessed
+      @retval FALSE otherwise
+  */
+  inline bool stmt_accessed_non_trans_temp_table()
+  {
+    DBUG_ENTER("THD::stmt_accessed_non_trans_temp_table");
+
+    DBUG_RETURN((stmt_accessed_table_flag &
+                ((1U << STMT_READS_TEMP_NON_TRANS_TABLE) |
+                 (1U << STMT_WRITES_TEMP_NON_TRANS_TABLE))) != 0);
+  }
+
 private:
  /**
    Indicates the format in which the current statement will be
@@ -1603,6 +1722,12 @@ class THD :public Statement,
  */
  uint32 binlog_unsafe_warning_flags;

+  /**
+    Bit field that determines the type of tables that are about to be
+    be accessed while executing a statement.
+  */
+  uint32 stmt_accessed_table_flag;
+
  void issue_unsafe_warnings();

  /*
@@ -2021,7 +2146,6 @@ class THD :public Statement,
    is set if a statement accesses a temporary table created through
    CREATE TEMPORARY TABLE. 
  */
-  bool       thread_temporary_used;
  bool	     charset_is_system_charset, charset_is_collation_connection;
  bool       charset_is_character_set_filesystem;
  bool       enable_slow_log;   /* enable slow log for current statement */

--- a/sql/sql_parse.cc
+++ b/sql/sql_parse.cc
@@ -5633,7 +5633,7 @@ void THD::reset_for_next_command()
    thd->transaction.all.modified_non_trans_table= FALSE;
  }
  DBUG_ASSERT(thd->security_ctx== &thd->main_security_ctx);
-  thd->thread_specific_used= thd->thread_temporary_used= FALSE;
+  thd->thread_specific_used= FALSE;

  if (opt_bin_log)
  {
@@ -5648,6 +5648,7 @@ void THD::reset_for_next_command()

  thd->reset_current_stmt_binlog_format_row();
  thd->binlog_unsafe_warning_flags= 0;
+  thd->stmt_accessed_table_flag= 0;

  DBUG_PRINT("debug",
             ("is_current_stmt_binlog_format_row(): %d",