merge mysql-5.1 (local) --> mysql-5.1

mysql-test/extra/rpl_tests/rpl_insert_duplicate.test

+# BUG#59338 Inconsistency in binlog for statements that don't change any rows STATEMENT SBR
+# In SBR, if a statement does not fail, it is always written to the binary log,
+# regardless if rows are changed or not. If there is a failure, a statement is
+# only written to the binary log if a non-transactional (.e.g. MyIsam) engine
+# is updated. INSERT ON DUPLICATE KEY UPDATE was not following the rule above
+# and was not written to the binary log, if then engine was Innodb.
+#
+# In this test case, we check if INSERT ON DUPLICATE KEY UPDATE that does not
+# change anything is still written to the binary log.
+
+# Prepare environment
+--connection master
+
+eval CREATE TABLE t1 (
+ a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=$engine_type;
+
+eval CREATE TABLE t2 (
+ a INT UNSIGNED
+) ENGINE=$engine_type;
+
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+
+# An insert duplicate that does not update anything must be written to the binary
+# log in SBR and MIXED modes. We check this property by summing a before and after
+# the update and comparing the binlog positions. The sum should be the same at both
+# points and the statement should be in the binary log.
+--let $binlog_file= query_get_value("SHOW MASTER STATUS", File, 1)
+--let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1)
+--let $statement_file=INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a
+--eval $statement_file
+
+--let $assert_cond= SUM(a) = 1 FROM t1
+--let $assert_text= Sum of elements in t1 should be 1.
+--source include/assert.inc
+
+if (`SELECT @@BINLOG_FORMAT = 'ROW'`)
+{
+  --let $binlog_position_cmp= =
+  --let $assert_cond= [SHOW MASTER STATUS, Position, 1] $binlog_position_cmp $binlog_start
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT != 'ROW' && UPPER('$engine_type') = UPPER('Innodb')`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 1, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT != 'ROW' && UPPER('$engine_type') = UPPER('MyIsam')`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 0, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+--source include/assert.inc
+
+# Compare master and slave
+--sync_slave_with_master
+--let $diff_tables= master:test.t1 , slave:test.t1
+--source include/diff_tables.inc
+
+# Clean up
+--connection master
+drop table t1, t2;
+--sync_slave_with_master

mysql-test/extra/rpl_tests/rpl_insert_ignore.test

@@ -5,6 +5,7 @@
 # Slave needs to be started with --innodb to store table in InnoDB.
 # Same test for MyISAM (which had no bug).
 
+--connection master
 eval CREATE TABLE t1 (
  a int unsigned not null auto_increment primary key,
  b int unsigned,
@@ -32,38 +33,49 @@ INSERT INTO t2 VALUES (5, 4);
 INSERT INTO t2 VALUES (6, 6);
 
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
-
-# Compare results
-
-SELECT * FROM t1 ORDER BY a;
-
-sync_slave_with_master;
-SELECT * FROM t1 ORDER BY a;
-
-# Now do the same for MyISAM
-
-connection master;
-drop table t1;
-eval CREATE TABLE t1 (
- a int unsigned not null auto_increment primary key,
- b int unsigned,
- unique (b)
-) ENGINE=$engine_type2;
-
-INSERT INTO t1 VALUES (1, 1);
-INSERT INTO t1 VALUES (2, 2);
-INSERT INTO t1 VALUES (3, 3);
-INSERT INTO t1 VALUES (4, 4);
-
-INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
-
-SELECT * FROM t1 ORDER BY a;
-
-sync_slave_with_master;
-SELECT * FROM t1 ORDER BY a;
-
-connection master;
+--let $assert_cond= COUNT(*) = 6 FROM t1
+--let $assert_text= Count of elements in t1 should be 6.
+--source include/assert.inc
+
+# Compare master and slave
+--sync_slave_with_master
+--let $diff_tables= master:test.t1 , slave:test.t1
+--source include/diff_tables.inc
+
+# BUG#59338 Inconsistency in binlog for statements that don't change any rows STATEMENT SBR
+# An insert ignore that does not update anything must be written to the binary log in SBR
+# and MIXED modes. We check this property by counting occurrences in t1 before and after
+# the insert and comparing the binlog positions. The count should be the same in both points
+# and the statement should be in the binary log.
+--connection master
+--let $binlog_file= query_get_value("SHOW MASTER STATUS", File, 1)
+--let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1)
+--let $statement_file=INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a
+--eval $statement_file
+
+--let $assert_cond= COUNT(*) = 6 FROM t1
+--let $assert_text= Count of elements in t1 should be 6.
+--source include/assert.inc
+
+if (`SELECT @@BINLOG_FORMAT = 'ROW'`)
+{
+  --let $binlog_position_cmp= =
+  --let $assert_cond= [SHOW MASTER STATUS, Position, 1] $binlog_position_cmp $binlog_start
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT != 'ROW' && UPPER('$engine_type') = UPPER('Innodb')`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 2, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT != 'ROW' && UPPER('$engine_type') = UPPER('MyIsam')`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 1, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+--source include/assert.inc
+
+# Clean up
+--connection master
 drop table t1, t2;
-sync_slave_with_master;
-
-# End of 4.1 tests
+--sync_slave_with_master

mysql-test/include/commit.inc

@@ -502,16 +502,16 @@ call p_verify_status_increment(2, 2, 2, 2);
 --echo # 12. Read-write statement: IODKU, change 0 rows. 
 --echo #
 insert t1 set a=2 on duplicate key update a=2;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 commit;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 
 --echo # 13. Read-write statement: INSERT IGNORE, change 0 rows. 
 --echo #
 insert ignore t1 set a=2;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 commit;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 
 --echo # 14. Read-write statement: INSERT IGNORE, change 1 row. 
 --echo #

mysql-test/r/commit_1innodb.result

@@ -518,21 +518,21 @@ SUCCESS
 # 12. Read-write statement: IODKU, change 0 rows. 
 #
 insert t1 set a=2 on duplicate key update a=2;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 SUCCESS
 
 commit;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 SUCCESS
 
 # 13. Read-write statement: INSERT IGNORE, change 0 rows. 
 #
 insert ignore t1 set a=2;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 SUCCESS
 
 commit;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 SUCCESS
 
 # 14. Read-write statement: INSERT IGNORE, change 1 row. 

mysql-test/suite/rpl/r/rpl_insert_duplicate.result

+include/master-slave.inc
+[connection master]
+CREATE TABLE t1 (
+a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=innodb;
+CREATE TABLE t2 (
+a INT UNSIGNED
+) ENGINE=innodb;
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a;
+include/assert.inc [Sum of elements in t1 should be 1.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
+include/diff_tables.inc [master:test.t1 , slave:test.t1]
+drop table t1, t2;
+CREATE TABLE t1 (
+a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=myisam;
+CREATE TABLE t2 (
+a INT UNSIGNED
+) ENGINE=myisam;
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a;
+include/assert.inc [Sum of elements in t1 should be 1.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
+include/diff_tables.inc [master:test.t1 , slave:test.t1]
+drop table t1, t2;
+include/rpl_end.inc

mysql-test/suite/rpl/r/rpl_insert_ignore.result

@@ -20,48 +20,36 @@ INSERT INTO t2 VALUES (4, 3);
 INSERT INTO t2 VALUES (5, 4);
 INSERT INTO t2 VALUES (6, 6);
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
-SELECT * FROM t1 ORDER BY a;
-a	b
-1	1
-2	2
-3	3
-4	4
-5	5
-6	6
-SELECT * FROM t1 ORDER BY a;
-a	b
-1	1
-2	2
-3	3
-4	4
-5	5
-6	6
-drop table t1;
+include/assert.inc [Count of elements in t1 should be 6.]
+include/diff_tables.inc [master:test.t1 , slave:test.t1]
+INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
+include/assert.inc [Count of elements in t1 should be 6.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
+drop table t1, t2;
 CREATE TABLE t1 (
 a int unsigned not null auto_increment primary key,
 b int unsigned,
 unique (b)
-) ENGINE=myisam;
-INSERT INTO t1 VALUES (1, 1);
-INSERT INTO t1 VALUES (2, 2);
-INSERT INTO t1 VALUES (3, 3);
-INSERT INTO t1 VALUES (4, 4);
+) ENGINE=innodb;
+CREATE TABLE t2 (
+a int unsigned, # to force INSERT SELECT to have a certain order
+b int unsigned
+) ENGINE=innodb;
+INSERT INTO t1 VALUES (NULL, 1);
+INSERT INTO t1 VALUES (NULL, 2);
+INSERT INTO t1 VALUES (NULL, 3);
+INSERT INTO t1 VALUES (NULL, 4);
+INSERT INTO t2 VALUES (1, 1);
+INSERT INTO t2 VALUES (2, 2);
+INSERT INTO t2 VALUES (3, 5);
+INSERT INTO t2 VALUES (4, 3);
+INSERT INTO t2 VALUES (5, 4);
+INSERT INTO t2 VALUES (6, 6);
+INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
+include/assert.inc [Count of elements in t1 should be 6.]
+include/diff_tables.inc [master:test.t1 , slave:test.t1]
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
-SELECT * FROM t1 ORDER BY a;
-a	b
-1	1
-2	2
-3	3
-4	4
-5	5
-6	6
-SELECT * FROM t1 ORDER BY a;
-a	b
-1	1
-2	2
-3	3
-4	4
-5	5
-6	6
+include/assert.inc [Count of elements in t1 should be 6.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
 drop table t1, t2;
 include/rpl_end.inc

mysql-test/suite/rpl/t/rpl_insert_duplicate.test

+#########################################
+# Wrapper for rpl_insert_duplicate.test #
+#########################################
+-- source include/master-slave.inc
+-- source include/have_innodb.inc
+#-- source include/have_binlog_format_mixed_or_statement.inc
+
+let $engine_type=innodb;
+-- source extra/rpl_tests/rpl_insert_duplicate.test
+
+let $engine_type=myisam;
+-- source extra/rpl_tests/rpl_insert_duplicate.test
+
+--source include/rpl_end.inc

mysql-test/suite/rpl/t/rpl_insert_ignore.test

@@ -4,7 +4,11 @@
 -- source include/not_ndb_default.inc
 -- source include/have_innodb.inc
 -- source include/master-slave.inc
-let $engine_type=innodb;
-let $engine_type2=myisam;
+
+-- let $engine_type=innodb
 -- source extra/rpl_tests/rpl_insert_ignore.test
+
+-- let $engine_type=innodb
+-- source extra/rpl_tests/rpl_insert_ignore.test
+
 --source include/rpl_end.inc

sql/sql_insert.cc

@@ -881,7 +881,7 @@ bool mysql_insert(THD *thd,TABLE_LIST *table_list,
       */
       query_cache_invalidate3(thd, table_list, 1);
     }
-    if ((changed && error <= 0) ||
+    if (error <= 0 ||
         thd->transaction.stmt.modified_non_trans_table ||
         was_insert_delayed)
     {