applied revisions: r6160

Detailed revision comments:

r6160 | vasil | 2009-11-11 15:33:49 +0200 (Wed, 11 Nov 2009) | 72 lines
branches/zip: Merge r6152:6159 from branches/5.1:

(r6158 was skipped as an equivallent change has already been merged from MySQL)

  ------------------------------------------------------------------------
  r6154 | calvin | 2009-11-11 02:51:17 +0200 (Wed, 11 Nov 2009) | 17 lines
  Changed paths:
     M /branches/5.1/include/os0file.h
     M /branches/5.1/os/os0file.c
  
  branches/5.1: fix bug#3139: Mysql crashes: 'windows error 995'
  after several selects on a large DB
  
  During stress environment, Windows AIO may fail with error code
  ERROR_OPERATION_ABORTED. InnoDB does not handle the error, rather
  crashes. The cause of the error is unknown, but likely due to
  faulty hardware or driver.
  
  This patch introduces a new error code OS_FILE_OPERATION_ABORTED,
  which maps to Windows ERROR_OPERATION_ABORTED (995). When the error
  is detected during AIO, the InnoDB will issue a synchronous retry
  (read/write).
  
  This patch has been extensively tested by MySQL support.
  
  Approved by: Marko
  rb://196
  ------------------------------------------------------------------------
  r6158 | vasil | 2009-11-11 14:52:14 +0200 (Wed, 11 Nov 2009) | 37 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/handler/ha_innodb.h
  
  branches/5.1:
  
  Merge a change from MySQL:
  (this has been reviewed by Calvin and Marko, and Calvin says Luis has
  incorporated Marko's suggestions)
  
    ------------------------------------------------------------
    revno: 3092.5.1
    committer: Luis Soares <luis.soares@sun.com>
    branch nick: mysql-5.1-bugteam
    timestamp: Thu 2009-09-24 15:52:52 +0100
    message:
      BUG#42829: binlogging enabled for all schemas regardless of
      binlog-db-db / binlog-ignore-db
            
      InnoDB will return an error if statement based replication is used
      along with transaction isolation level READ-COMMITTED (or weaker),
      even if the statement in question is filtered out according to the
      binlog-do-db rules set. In this case, an error should not be printed.
            
      This patch addresses this issue by extending the existing check in
      external_lock to take into account the filter rules before deciding to
      print an error. Furthermore, it also changes decide_logging_format to
      take into consideration whether the statement is filtered out from 
      binlog before decision is made.
    added:
      mysql-test/suite/binlog/r/binlog_stm_do_db.result
      mysql-test/suite/binlog/t/binlog_stm_do_db-master.opt
      mysql-test/suite/binlog/t/binlog_stm_do_db.test
    modified:
      sql/sql_base.cc
      sql/sql_class.cc
      storage/innobase/handler/ha_innodb.cc
      storage/innobase/handler/ha_innodb.h
      storage/innodb_plugin/handler/ha_innodb.cc
      storage/innodb_plugin/handler/ha_innodb.h
  
  ------------------------------------------------------------------------

applied revisions: r6157

Detailed revision comments:

r6157 | jyang | 2009-11-11 14:27:09 +0200 (Wed, 11 Nov 2009) | 10 lines
branches/zip: Fix an issue that a local variable defined
in innodb_file_format_check_validate() is being referenced
across function in innodb_file_format_check_update().
In addition, fix "set global innodb_file_format_check =
DEFAULT" call.
Bug #47167: "set global innodb_file_format_check" cannot
set value by User-Defined Variable."
rb://169 approved by Sunny Bains and Marko.

Enable partition_innodb_plugin.test for BUG#32430
applied revisions: r6134, r6137, r6153

Detailed revision comments:

r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.

rb://134 approved by Sunny Bains
r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line
branches/zip: dict_index_too_big_for_undo(): Correct a typo.
r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines
branches/zip: Merge r6125:6152 from branches/5.1:

(everything except the last white-space change was skipped as it is already
in branches/zip)

  ------------------------------------------------------------------------
  r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines
  Changed paths:
     M /branches/5.1/Makefile.am
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test
  
  branches/5.1:
  
  Backport c6121 from branches/zip:
  
    ------------------------------------------------------------------------
    r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
    Changed paths:
       M /branches/zip/mysql-test/innodb-autoinc.result
    
    branches/zip: This test has been problematic for sometime now. The underlying
    bug is that the data dictionaries get out of sync. In the AUTOINC code we
    try and apply salve to the symptoms. In the past MySQL made some unrelated
    change and the dictionaries stopped getting out of sync and this test started
    to fail. Now, it seems they have reverted that changed and the test is
    passing again. I suspect this is not he last time that this test will change.
    
    ------------------------------------------------------------------------
  
  ------------------------------------------------------------------------
  r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines
  Changed paths:
     M /branches/5.1/Makefile.am
  
  branches/5.1:
  
  Revert a change to Makefile.am that sneaked unnoticed in c6127.
  
  ------------------------------------------------------------------------
  r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/include/ha_prototypes.h
     M /branches/5.1/ut/ut0ut.c
  
  branches/5.1: Port r6134 from branches/zip:
  
    ------------------------------------------------------------------------
    r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines
  
    branches/zip: innobase_convert_identifier(): Convert table names with
    explain_filename() to address Bug #32430: 'show innodb status'
    causes errors Invalid (old?) table or database name in logs.
  
    rb://134 approved by Sunny Bains
    ------------------------------------------------------------------------
  
  innobase_print_identifier(): Replace with innobase_convert_name().
  
  innobase_convert_identifier(): New function, called by innobase_convert_name().
  ------------------------------------------------------------------------
  r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines
  Changed paths:
     M /branches/5.1/CMakeLists.txt
  
  branches/5.1:
  
  Followup to r5700: Adjust the changes so they are the same as in the BZR
  repository.
  
  ------------------------------------------------------------------------
  r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1:
  
  Merge a part of r2911.5.5 from MySQL:
  (the other part of this was merged in c5700)
  
    ------------------------------------------------------------
    revno: 2911.5.5
    committer: Vladislav Vaintroub <vvaintroub@mysql.com>
    branch nick: 5.1-innodb_plugin
    timestamp: Wed 2009-06-10 10:59:49 +0200
    message:
      Backport WL#3653 to 5.1 to enable bundled innodb plugin.
      Remove custom DLL loader code from innodb plugin code, use 
      symbols exported from mysqld.
    removed:
      storage/innodb_plugin/handler/handler0vars.h
      storage/innodb_plugin/handler/win_delay_loader.cc
    added:
      storage/mysql_storage_engine.cmake
      win/create_def_file.js
    modified:
      CMakeLists.txt
      include/m_ctype.h
      include/my_global.h
      include/my_sys.h
      include/mysql/plugin.h
      libmysqld/CMakeLists.txt
      mysql-test/mysql-test-run.pl
      mysql-test/t/plugin.test
      mysql-test/t/plugin_load-master.opt
      mysys/charset.c
      sql/CMakeLists.txt
      sql/handler.h
      sql/mysql_priv.h
      sql/mysqld.cc
      sql/sql_class.cc
      sql/sql_class.h
      sql/sql_list.h
      sql/sql_profile.h
      storage/Makefile.am
      storage/archive/CMakeLists.txt
      storage/blackhole/CMakeLists.txt
      storage/csv/CMakeLists.txt
      storage/example/CMakeLists.txt
      storage/federated/CMakeLists.txt
      storage/heap/CMakeLists.txt
      storage/innobase/CMakeLists.txt
      storage/innobase/handler/ha_innodb.cc
      storage/innodb_plugin/CMakeLists.txt
      storage/innodb_plugin/handler/ha_innodb.cc
      storage/innodb_plugin/handler/handler0alter.cc
      storage/innodb_plugin/handler/i_s.cc
      storage/innodb_plugin/plug.in
      storage/myisam/CMakeLists.txt
      storage/myisammrg/CMakeLists.txt
      win/Makefile.am
      win/configure.js
  
  ------------------------------------------------------------------------
  r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1:
  
  White space fixup.
  
  ------------------------------------------------------------------------

Detailed revision comments:

r6130 | marko | 2009-11-02 11:42:56 +0200 (Mon, 02 Nov 2009) | 9 lines
branches/zip: Free all resources at shutdown. Set pointers to NULL, so
that Valgrind will not complain about freed data structures that are
reachable via pointers.  This addresses Bug #45992 and Bug #46656.

This patch is mostly based on changes copied from branches/embedded-1.0,
mainly c5432, c3439, c3134, c2994, c2978, but also some other code was
copied.  Some added cleanup code is specific to MySQL/InnoDB.

rb://199 approved by Sunny Bains

1. Enabling the disabled test for BUG#32430 for builtin innodb
2. Disabling the innodb-autoinc.test for innodb plugin.

1. BUG#47720 - REPLACE INTO Autoincrement column with negative values.

Detailed revision comments:

r6235 | sunny | 2009-11-26 01:14:42 +0200 (Thu, 26 Nov 2009) | 9 lines
branches/5.1: Fix Bug#47720 - REPLACE INTO Autoincrement column with negative values.

This bug is similiar to the negative autoinc filter patch from earlier,
with the additional handling of filtering out the negative column values
set explicitly by the user.

rb://184
Approved by Heikki.

1. BUG#49032 - auto_increment field does not initialize to last value 
               in InnoDB Storage Engine

2. Fix whitespace issues and fix tests and make read float/double arg const

Detailed revision comments:

r6231 | sunny | 2009-11-25 10:26:27 +0200 (Wed, 25 Nov 2009) | 7 lines
branches/5.1: Fix BUG#49032 - auto_increment field does not initialize to last value in InnoDB Storage Engine.

We use the appropriate function to read the column value for non-integer
autoinc column types, namely float and double.

rb://208. Approved by Marko.

r6232 | sunny | 2009-11-25 10:27:39 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix white space errors.

r6233 | sunny | 2009-11-25 10:28:35 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix tests and make read float/double arg const.


r6234 | sunny | 2009-11-25 10:29:03 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix whitepsace issues.

1. BUG#48482 - innodb-autoinc.test fails with results difference

2. enable the disabled test

Detailed revision comments:

r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines
branches/5.1: Fix autoinc failing test results.
(this should be skipped when merging 5.1 into zip)

1. BUG#45961 - DDL on partitioned innodb tables leaves data dictionary 
               in an inconsistent state

2. Fix formatting

Detailed revision comments:

r6205 | jyang | 2009-11-20 07:55:48 +0200 (Fri, 20 Nov 2009) | 11 lines
branches/5.1: Add a special case to handle the Duplicated Key error
and return DB_ERROR instead. This is to avoid a possible SIGSEGV
by mysql error handling re-entering the storage layer for dup key
info without proper table handle.
This is to prevent a server crash when error situation in bug
#45961 "DDL on partitioned innodb tables leaves data dictionary
in an inconsistent state" happens.

rb://157 approved by Sunny Bains.


r6206 | jyang | 2009-11-20 09:38:43 +0200 (Fri, 20 Nov 2009) | 3 lines
branches/5.1: Non-functional change, fix formatting.

1. BUG#48526 - Data type for float and double is incorrectly 
               reported in InnoDB table monitor

Detailed revision comments:

r6188 | jyang | 2009-11-18 07:14:23 +0200 (Wed, 18 Nov 2009) | 8 lines
branches/5.1: Fix bug #48526 "Data type for float and
double is incorrectly reported in InnoDB table monitor".
Certain datatypes are not printed correctly in
dtype_print().

rb://204 Approved by Marko.

1. BUG#4869 - when innodb tablespace is configured too small,
              crash and corruption!

Detailed revision comments:

r6187 | jyang | 2009-11-18 05:27:30 +0200 (Wed, 18 Nov 2009) | 9 lines
branches/5.1: Fix bug #48469 "when innodb tablespace is
configured too small, crash and corruption!". Function
btr_create() did not check the return status of fseg_create(),
and continue the index creation even there is no sufficient
space.

rb://205 Approved by Marko

r6200 | vasil | 2009-11-19 12:14:23 +0200 (Thu, 19 Nov 2009) | 4 lines
branches/5.1:

White space fixup - indent under the opening (

r6203 | jyang | 2009-11-19 15:12:22 +0200 (Thu, 19 Nov 2009) | 8 lines
branches/5.1: Use btr_free_root() instead of fseg_free() for
the fix of bug #48469, because fseg_free() is not defined
in the zip branch. And we could save one mini-trasaction started
by fseg_free().

Approved by Marko.

1. BUG#3139 - Mysql crashes: "windows error 995" after several 
              selects on a large DB

Detailed revision comments:

r6154 | calvin | 2009-11-11 02:51:17 +0200 (Wed, 11 Nov 2009) | 17 lines
branches/5.1: fix bug#3139: Mysql crashes: 'windows error 995'
after several selects on a large DB

During stress environment, Windows AIO may fail with error code
ERROR_OPERATION_ABORTED. InnoDB does not handle the error, rather
crashes. The cause of the error is unknown, but likely due to
faulty hardware or driver.

This patch introduces a new error code OS_FILE_OPERATION_ABORTED,
which maps to Windows ERROR_OPERATION_ABORTED (995). When the error
is detected during AIO, the InnoDB will issue a synchronous retry
(read/write).

This patch has been extensively tested by MySQL support.

Approved by: Marko
rb://196

1. BUG#32430 - 'show innodb status' causes errors Invalid (old?) table
               or database name in logs

2. White space fixup

Detailed revision comments:

r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines
branches/5.1: Port r6134 from branches/zip:

  ------------------------------------------------------------------------
  r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines

  branches/zip: innobase_convert_identifier(): Convert table names with
  explain_filename() to address Bug #32430: 'show innodb status'
  causes errors Invalid (old?) table or database name in logs.

  rb://134 approved by Sunny Bains
  ------------------------------------------------------------------------

innobase_print_identifier(): Replace with innobase_convert_name().

innobase_convert_identifier(): New function, called by innobase_convert_name().
r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines
branches/5.1:

White space fixup.

Fix for failure on windows PB2 because of the result content mismatch.
In windows additional information about TCP port was causing failures.
Added to regex.

      
The 'slave_patternload_file' is assigned to the real path of the load data file 
when initializing the object of Relay_log_info. But the path of the load data
file is not formatted to real path when executing event from relay log. So the 
error will be encountered if the path of the load data file is a symbolic link.

Actually the global 'opt_secure_file_priv' is not formatted to real path when 
loading data from file. So the same thing will happen too.

      
To fix these errors, the path of the load data file should be formatted to 
real path when executing event from relay log. And the 'opt_secure_file_priv' 
should be formatted to real path when loading data infile.


mysql-test/suite/rpl/r/rpl_loaddata_symlink.result:
  Test result for bug#43913.
mysql-test/suite/rpl/t/rpl_loaddata_symlink-master.sh:
  Added the test file to create a link from $MYSQLTEST_VARDIR/std_data 
  to $MYSQLTEST_VARDIR/std_data_master_link
mysql-test/suite/rpl/t/rpl_loaddata_symlink-slave.sh:
  Added the test file to create a link from $MYSQLTEST_VARDIR/std_data 
  to $MYSQLTEST_VARDIR/std_data_slave_link
mysql-test/suite/rpl/t/rpl_loaddata_symlink.test:
  Added the test file to verify if loading data infile will work fine 
  if the path of the load data file is a symbolic link.
sql/rpl_rli.cc:
  Added call 'my_realpath' function for avoiding sometimes the 'fn_format' 
  function can't format real path rightly.

dependent on the case mode

- embedded server doesn't support external clients
- removed unnecessary command line options

<tmp_tbl> with RBL

When binlogging the statement, the server always handle the existing
object as a table, even though it is a view. However a view is
handled differently in other parts of the code thus leading the
statement to crash in RBL if the view exists.

This happens because the underlying tables for the view are not opened
when we try to call store_create_info() on the view in order to build
a CREATE TABLE statement.

This patch will only address the crash problem, other binlogging
problems related to CREATE TABLE IF NOT EXISTS LIKE when the existing
object is a view will be solved by BUG 47442.

  is mixed case

Transcode the procedure name to lowercase when searching for it in the 
hash. This is the missing part of the fix for bug #41049.

block, might expand to function calls (Bug#48331)

for each record'

There was an error in an internal structure in the range
optimizer (SEL_ARG). Bad design causes parts of a data
structure not to be initialized when it is in a certain
state. All client code must check that this state is not
present before trying to access the structure's data. Fixed
by

- Checking the state before trying to access data (in
several places, most of which not covered by test case.)

- Copying the keypart id when cloning SEL_ARGs


mysql-test/r/range.result:
  Bug#48459: Test result.
mysql-test/t/range.test:
  Bug#48459: Test case.
sql/opt_range.cc:
  Bug#48459: Fix + doxygenated count_key_part_usage comment.

BUG#46000 - using index called GEN_CLUST_INDEX crashes server

Detailed revision comments:

r6180 | jyang | 2009-11-17 10:54:57 +0200 (Tue, 17 Nov 2009) | 7 lines
branches/5.0: Merge/Port fix for bug #46000 from branches/5.1
-r5895 to branches/5.0. Disallow creating index with the
name of "GEN_CLUST_INDEX" which is reserved for the default
system primary index. Minor adjusts on table name screening
format for added tests.

Arg_comparator now takes into account that some of
optimizations aren't done in the PREPARE stmt.

BUG#47777 - innodb dies with spatial pk: Failing assertion: buf <= original_buf + buf_len

Detailed revision comments:

r6178 | jyang | 2009-11-17 08:52:11 +0200 (Tue, 17 Nov 2009) | 6 lines
branches/5.0: Merge fix for bug #47777 from branches/5.1 -r6045
to bracnches/5.0. Treat the Geometry data same as Binary BLOB
in ha_innobase::store_key_val_for_row(), since the Geometry
data is stored as Binary BLOB in Innodb.

mysql client displays wrong character-set of server. When a user changes the
charset of a server, mysql client 'status' command displays wrong charset but
the command "SHOW VARIABLES LIKE "%charset%" displayed correct charset results.
The problem is only with the mysql client's 'status' command output.

In mysql client, the method mysql_store_lazy_result() returns 0 for
success and non-zero for failure. The method com_status() was using this method
wrongly. Fixed all such instances according to return value of the method 
mysql_store_lazy_result().

client/mysql.cc:
  Fix for BUG#47671 - wrong character-set after upgrade from 5.1.34 to 5.1.39
  
  Fix com_status() method to use mysql_store_lazy_result() properly.
mysql-test/r/bug47671.result:
  Fix for BUG#47671 - wrong character-set after upgrade from 5.1.34 to 5.1.39
  
  Testcase for BUG#47671
mysql-test/t/bug47671-master.opt:
  Fix for BUG#47671 - wrong character-set after upgrade from 5.1.34 to 5.1.39
  
  Testcase for BUG#47671
mysql-test/t/bug47671.test:
  Fix for BUG#47671 - wrong character-set after upgrade from 5.1.34 to 5.1.39
  
  Testcase for BUG#47671