Thanks to Martin Friebe for finding and submitting a fix for this bug!
  
  A table with maximum number of key segments and maximum length key name
  would have a corrupted .frm file, due to an incorrect calculation of the
  complete key length.  Now the key length is computed correctly (I hope) :-)
  
  MyISAM would reject a table with the maximum number of keys and the maximum
  number of key segments in all keys.  It would allow one less than this total
  maximum.  Now MyISAM accepts a table defined with the maximum.  (This is a
  very minor issue.)


myisam/mi_open.c:
  Bug #26642: change >= to > in a comparison (i.e., error 
  only if key_parts_in_table really is greater than 
  MAX_KEY * MAX_KEY_SEG)
mysql-test/r/create.result:
  Bug #26642: test case
mysql-test/t/create.test:
  Bug #26642: test case
sql/table.cc:
  Bug #26642: In create_frm(), fix formula for key_length; 
  it was too small by (keys * 2) bytes

into  olga.mysql.com:/home/igor/dev-opt/mysql-5.0-opt-bug29087

into  magare.gmz:/home/kgeorge/mysql/autopush/B29154-5.0-opt

a lookup into a BINARY index by a key ended with spaces. It caused
an assertion abort for a debug version and wrong results for non-debug
versions.

The problem occurred because the function _mi_pack_key stripped off 
the trailing spaces from binary search keys while the function _mi_make_key
did not do it when keys were inserted into the index.

Now the function _mi_pack_key does not remove the trailing spaces from
search keys if they are of the binary type.


mysql-test/r/binary.result:
  Added a test case for bug #29087.
mysql-test/t/binary.test:
  Added a test case for bug #29087.

into  gleb.loc:/home/uchum/work/bk/5.0-opt

into  gleb.loc:/home/uchum/work/bk/5.0-opt

into  gleb.loc:/home/uchum/work/bk/4.1-opt

into  magare.gmz:/home/kgeorge/mysql/autopush/B29154-5.0-opt

  LOCK TABLES takes a list of tables to lock. It may lock several 
  tables successfully and then encounter a tables that it can't lock, 
  e.g. because it's locked. In such case it needs to undo the locks on
  the already locked tables. And it does that. But it has also notified
  the relevant table storage engine handlers that they should lock.
  The only reliable way to ensure that the table handlers will give up
  their locks is to end the transaction. This is what UNLOCK TABLE 
  does : it ends the transaction if there were locked tables by LOCK 
  tables.
  It is possible to end the transaction when the lock fails in 
  LOCK TABLES because LOCK TABLES ends the transaction at its start 
  already. 
  Fixed by ending (again) the transaction when LOCK TABLES fails to
  lock a table.


mysql-test/r/innodb_mysql.result:
  Bug #29154: test case
mysql-test/t/innodb_mysql.test:
  Bug #29154: test case
sql/sql_parse.cc:
  Bug #29154: end the trasaction at a failing 
  LOCK TABLES so the handler can free its locks.

into  olga.mysql.com:/home/igor/dev-opt/mysql-5.0-opt-bug25602


sql/sql_select.cc:
  Auto merged

into  gleb.loc:/home/uchum/work/bk/5.0-opt


sql/log_event.cc:
  Auto merged

the loose scan optimization for grouping queries was applied returned 
a wrong result set when the query was used with the SQL_BIG_RESULT
option.

The SQL_BIG_RESULT option forces to use sorting algorithm for grouping
queries instead of employing a suitable index. The current loose scan
optimization is applied only for one table queries when the suitable
index is covering. It does not make sense to use sort algorithm in this
case. However the create_sort_index function does not take into account
the possible choice of the loose scan to implement the DISTINCT operator
which makes sorting unnecessary. Moreover the current implementation of
the loose scan for queries with distinct assumes that sorting will
never happen. Thus in this case create_sort_index should not call
the function filesort.


mysql-test/r/group_min_max.result:
  Added a test case for bug #25602.
mysql-test/t/group_min_max.test:
  Added a test case for bug #25602.

into  gleb.loc:/home/uchum/work/bk/5.0-opt

into  gleb.loc:/home/uchum/work/bk/5.0-opt

INSERT into table from SELECT from the same table
with ORDER BY and LIMIT was inserting other data
than sole SELECT ... ORDER BY ... LIMIT returns.

One part of the patch for bug #9676 improperly pushed
LIMIT to temporary table in the presence of the ORDER BY
clause.
That part has been removed.


sql/sql_select.cc:
  Fixed bug #29095.
  One part of the patch for bug #9676 improperly pushed
  LIMIT to temporary table in the presence of the ORDER BY
  clause.
  That part has been removed.
mysql-test/t/insert_select.test:
  Expanded the test case for bug #9676.
  Created a test case for bug #29095.
mysql-test/r/insert_select.result:
  Expanded the test case for bug #9676.
  Created a test case for bug #29095.

into  trift2.:/MySQL/M50/push-5.0

to be run only if it is available on the machine.

into  magare.gmz:/home/kgeorge/mysql/autopush/B28400-5.0-opt

The C optimizer may decide that data access operations
through pointer of different type are not related to 
the original data (strict aliasing).
This is what happens in fetch_long_with_conversion(),
when called as part of mysql_stmt_fetch() : it tries 
to check for truncation errors by first storing float
(and other types of data) into a char * buffer and then 
accesses them through a float pointer.
This is done to prevent the effects of excess precision
when using FPU registers.
However the doublestore() macro converts a double pointer
to an union pointer. This violates the strict aliasing rule.
Fixed by making the intermediary variables volatile (
to not re-introduce the excess precision bug) and using
the intermediary value instead of the char * buffer.
Note that there can be loss of precision for both signed
and unsigned 64 bit integers converted to double and back,
so the check must stay there (even for compatibility 
reasons).
Based on the excellent analysis in bug 28400.


libmysql/libmysql.c:
  Bug #27383: avoid pointer aliasing problems while 
  not re-violating the Intel FPU gcc bug.

into  trift2.:/MySQL/M50/push-5.0

into  maint1.mysql.com:/data/localhome/tsmith/bk/maint/50

into  mysql.com:/home/hf/work/28839/my50-28839

mysql-test/r/rpl_skip_error.result:
  test result fixed
mysql-test/t/rpl_skip_error.test:
  inconsistent column results hidden

The reason the "reap;" succeeds unexpectedly is because the query was completing(almost always) and the network buffer was big enough to store the query result (sometimes) on Windows, meaning the response was completely sent before the server thread could be killed.

Therefore we use a much longer running query that doesn't have a chance to fully complete before the reap happens, testing the kill properly.


mysql-test/r/kill.result:
  We use a much longer running query that doesn't have a chance to fully complete before the reap happens.
mysql-test/t/kill.test:
  We use a much longer running query that doesn't have a chance to fully complete before the reap happens.

into  olga.mysql.com:/home/igor/dev-opt/mysql-5.0-opt-bug29104


sql/item.cc:
  Auto merged

into  maint1.mysql.com:/data/localhome/tsmith/bk/maint/50

into  maint1.mysql.com:/data/localhome/tsmith/bk/maint/50


mysql-test/t/innodb.test:
  Auto merged
mysql-test/r/innodb.result:
  Manual merge

into  maint1.mysql.com:/data/localhome/tsmith/bk/maint/41

into  amd64.(none):/src/bug27029/my50-bug27029


myisam/sort.c:
  Auto merged

- When creating an index for the sort, the number of rows plus 1 is used 
to allocate a buffer.  In this test case, the number of rows 4294967295 
is the max value of an unsigned integer, so when 1 was added to it, a 
buffer of size 0 was allocated causing the crash.
- Create new test suite for this bug's test suite as per QA.


myisam/sort.c:
  Bug#27029 alter table ... enable keys crashes mysqld on large table
  - Check to make sure the value of records is < UINT_MAX32 to avoid a 
  false positive on the remaining condition.
mysql-test/suite/large_tests/README.TXT:
  Bug#27029 alter table ... enable keys crashes mysqld on large table
  - New testsuite for large tests.
  - Added mtr hint for potential testers.
mysql-test/suite/large_tests/r/alter_table.result:
  Bug#27029 alter table ... enable keys crashes mysqld on large table
  - New testsuite for large tests.
  - Added results for bug.
mysql-test/suite/large_tests/t/alter_table.test:
  Bug#27029 alter table ... enable keys crashes mysqld on large table
  - New testsuite for large tests.
  - Added test for bug.

into  maint1.mysql.com:/data/localhome/tsmith/bk/maint/50


configure.in:
  Auto merged

into  mysql.com:/nfsdisk1/lars/bk/mysql-5.0-rpl

into  pilot.(none):/data/msvensson/mysql/mysql-5.0-maint

into  pilot.(none):/data/msvensson/mysql/mysql-5.0-maint


mysql-test/mysql-test-run.pl:
  Auto merged

into  mysql.com:/home/hf/work/28839/my50-28839

mysql-test/r/rpl_skip_error.result:
  result fixed
mysql-test/t/rpl_skip_error.test:
  master port dependency eliminated

into  trift2.:/MySQL/M50/push-5.0

into  mysql.com:/home/hf/work/28839/my50-28839


sql/log_event.cc:
  Auto merged