When using a wrong key, all encrypted pages will look corrupted,
and occasionally the test may access other pages than
the clustered index root page.

- Refactor code to isolate page validation in page_is_corrupted() function.

- Introduce --extended-validation parameter(default OFF) for mariabackup
--backup to enable decryption of encrypted uncompressed pages during
backup.

- mariabackup would still always check checksum on encrypted data,
it is needed to detect  partially written pages.

In MDEV-13103, I made a mistake in the error handling of
page_compressed=1 decryption when the default
innodb_compression_algorithm=zlib is used.
Due to this mistake, with certain versions of zlib,
MariaDB would fail to detect a corrupted page.

The problem was uncovered by the following tests:
mariabackup.unencrypted_page_compressed
mariabackup.encrypted_page_compressed

MDEV-17975 Assertion `! is_set()' or `!is_set() || (m_status == DA_OK_BULK && is_bulk_op())' failed upon REVOKE under LOCK TABLE

open_grant_tables() returns -1/0/1, where -1 is an error, while 1 is not.
Don't store it's return value in bool

Write a test case that computes valid crc32 checksums for
an encrypted page, but zeroes out the payload area, so
that the checksum after decryption fails.

xb_fil_cur_read(): Validate the page number before trying
any checksum calculation or decrypting or decompression.
Also, skip zero-filled pages. For page_compressed pages,
ensure that the FIL_PAGE_TYPE was changed. Also, reject
FIL_PAGE_PAGE_COMPRESSED_ENCRYPTED if no decryption was attempted.

The fix was accidentally only applied to InnoDB, and encryption tests
were not adjusted.

Problem:
=======
Mariabackup seems to fail to verify the pages of compressed tables.
The reason is that both fil_space_verify_crypt_checksum() and
buf_page_is_corrupted() will skip the validation for compressed pages.

Fix:
====
Mariabackup should call fil_page_decompress() for compressed and encrypted
compressed page. After that, call buf_page_is_corrupted() to
check the page corruption.

Starting with commit 6b698715
the encrypted page checksum is only computed with crc32.
Encrypted data pages that were written earlier can contain
other checksums, but new ones will only contain crc32.

Because of this, it does not make sense to implement strict
checks of innodb_checksum_algorithm for other than strict_crc32.

fil_space_verify_crypt_checksum(): Treat strict_innodb as innodb
and strict_none as none. That is, allow a match from any of the
algorithms none, innodb, crc32. (This is how it worked before the
second MDEV-12112 fix.)

Thanks to Thirunarayanan Balathandayuthapani for pointing this out.

fil_space_verify_crypt_checksum(): Add a dummy return statement
in case memory is corrupted and innodb_checksum_algorithm has
an invalid value.

The initial fix only covered a part of Mariabackup.
This fix hardens InnoDB and XtraDB in a similar way, in order
to reduce the probability of mistaking a corrupted encrypted page
for a valid unencrypted one.

This is based on work by Thirunarayanan Balathandayuthapani.

fil_space_verify_crypt_checksum(): Assert that key_version!=0.
Let the callers guarantee that. Now that we have this assertion,
we also know that buf_page_is_zeroes() cannot hold.
Also, remove all diagnostic output and related parameters,
and let the relevant callers emit such messages.
Last but not least, validate the post-encryption checksum
according to the innodb_checksum_algorithm (only accepting
one checksum for the strict variants), and no longer
try to validate the page as if it was unencrypted.

buf_page_is_zeroes(): Move to the compilation unit of the only callers,
and declare static.

xb_fil_cur_read(), buf_page_check_corrupt(): Add a condition before
calling fil_space_verify_crypt_checksum(). This is a non-functional
change.

buf_dblwr_process(): Validate the page only as encrypted or unencrypted,
but not both.

Remove provider defaults check from 'galera_defaults' MTR test

Problem is that if you use bundled yassl AES_CTR is not supported. There is a way to detect that but as we really want to keep this test enabled did not add
skip for missing support. Changed method to AES_CBC as there is no need to
use AES_CTR.

Add check that file key management plugin is found.

From time to time Galera adds new parameters or changes defaults to
existing ones. Every time this happens galera_defaults test needs a
fix (and a commit) because it insists on checking these defaults.
This is making life hard because any Galera update may require a fix
to MariaDB code even though it is totally unrelated and defeats the
whole idea of a provider living its own life.
This commit removes checking for provider defaults to avoid false
positive failures on MariaDB side.

After validating the post-encryption checksum on an encrypted page,
Mariabackup should decrypt the page and validate the pre-encryption
checksum as well. This should reduce the probability of accepting
invalid pages as valid ones.

This is a backport and refactoring of a patch that was
originally written by Thirunarayanan Balathandayuthapani
for the 10.2 branch.

Also, apply the MDEV-17957 changes to encrypted page checksums,
and remove error message output from the checksum function,
because these messages would be useless noise when mariabackup
is retrying reads of corrupted-looking pages, and not that
useful during normal server operation either.

The error messages in fil_space_verify_crypt_checksum()
should be refactored separately.

This is a backport of a part of
commit 18455ec3
from 10.1.

Problem:

  Innodb_checksum_algorithm checks for all checksum algorithm to
validate the page checksum even though the algorithm is specified as
strict_crc32, strict_innodb, strict_none.

Fix:

   Remove the checks for all checksum algorithm to validate the page
checksum if the algo is specified as strict_* values.

1. don't run full mysql_upgrade on every server restart,
   use --version-check to do it only once

2. fix syslog tag name in the postinst script, don't pretend
   mysqld_safe generated all these messages. Auto-detect the version
   to simplify maintenance

Current implementation is conflicting. If UNICODE is defined, FormatMessage() will be FormatMessageW(), and variable win_errormsg with type char can not be passed to it, which should be changed to TCHAR instead. Since we don't use UNICODE here, we can use FormatMessageA() directly to avoid conversion error.
```
my_global.h(1092): error C2664: 'DWORD FormatMessageW(D
WORD,LPCVOID,DWORD,DWORD,LPWSTR,DWORD,va_list *)' : cannot convert argument 5 from 'char [2048]' to 'LPWSTR'
```

ha_innobase::prepare_inplace_alter_table(): check max column length for every
index in a table, not just added in this particular ALTER TABLE with ADD INDEX ones.

The problem here is EITS statistics does not calculate statistics for the partitions of the table.
So a temporary solution would be to not read EITS statistics for partitioned tables.

Also disabling reading of EITS for columns that participate in the partition list of a table.

create_table_def(), ha_innobase::create(): Defer fts_optimize_add_table()
until after the table has been successfully created.

merge_role_db_privileges() was remembering pointers into Dynamic_array
acl_dbs, and later was using them, while pushing more elements into the
array. But pushing can cause realloc, and it can invalidate all pointers.

Fix: remember and use indexes of elements, not pointers.

MDEV-17804: Galera tests cause mysql_socket.h:738: inline_mysql_socket_send: Assertion `mysql_socket.fd != -1' failed.

Do not do end of statement logic if thd is already killed as
socket is already closed.

Problem was that controlling connection i.e. connection that
executed the query SET GLOBAL wsrep_reject_queries = ALL_KILL;
was also killed but server would try to send result from that
query to controlling connection resulting a assertion
mysqld: /home/jan/mysql/10.2-sst/include/mysql/psi/mysql_socket.h:738: inline_mysql_socket_send: Assertion `mysql_socket.fd != -1' failed.
as socket was closed when controlling connection was closed.

wsrep_close_client_connections()
	Do not close controlling connection and instead of
	wsrep_close_thread() we do now soft kill by THD::awake

wsrep_reject_queries_update()
	Call wsrep_close_client_connections using current thd.

Add test case for encrypted and page compressed tables.

In this case we were trying to access memory for key_parts which we did not
assign for a fields because it did not any EITS statistics.
The check if EITS statistics for a column is avaialable or not was missing.