This is a fix for operating systems that have pthread_t defined
as a pointer and use the default pthread_self() mechanism for
identifying threads. More specifically, this is a build fix
for NetBSD.

Any changes I submit are freely available under the new BSD
license.
Signed-off-by: Nia Alarie <nia@NetBSD.org>

page_apply_insert_redundant(): Correct a condition that would
occasionally fail when recovering changes for the change buffer tree
(where extra_size and data_size can vary wildly).

This was broken in commit 138cbec5
(MDEV-21724).

Fix regression (debug assertion or division by 0)
caused by cfd3d70c

Synced from downstream Debian:
https://salsa.debian.org/mariadb-team/mariadb-10.5/-/commit/7015e8e4b5ed3a7727a8e442039fceb2c5b1a6b9

if the server isn't started and innodb initiated a shutdown process -
don't wait for the server to start, it won't

and replace it with equally unsightly %ifdef/%endif hack
also, support %else, it's nice

In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.

This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.

# Conflicts:
#	sql/sql_cte.cc
#	sql/sql_cte.h
#	sql/sql_lex.cc
#	sql/sql_lex.h
#	sql/sql_view.cc
#	sql/sql_yacc.yy
#	sql/sql_yacc_ora.yy

closes #1828

In NetBSD 9.x and prior, udata is an intptr_t, but in 10.x (current
development branch) it was changed to be a void * for compatibility
with other BSDs a year or so ago.

Unfortunately, this does not simplify the code, as NetBSD 8.x and 9.x
are still supported and will be for a few more years.
Signed-off-by: Nia Alarie <nia@NetBSD.org>

In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.

This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.

This needs backporting to MariaDB 10.5.

Any changes I submit are freely available under the new BSD
license.
Signed-off-by: Nia Alarie <nia@NetBSD.org>

- Patch addresses the problem to fix double free of
transaction if it is own transaction.

Other things
- Added lost option '--just-clean'

No crash (probably fixed before). Added test case

The reason was that WSREP code in mysql_create_or_drop_trigge() did
jump to an exit label that did not do proper cleanup of state.
Fixed by ensuring that also WSREP code goes trough the cleanup process.

		FTS add index fails

Problem:
========
InnoDB double frees the table if auxiliary fts table
creation fails and fails to set the dict operation
for the transaction. It leads to failure while
dropping newly added index.

Solution:
=========
  InnoDB should avoid double freeing and set the
dictionary operation of transaction in
fts_create_common_tables()

InnoDB truncate table fails to load the fts stopword table into
cache. In that case, InnoDB double frees the truncate creation
transaction. InnoDB should free the transaction which was
created inside ha_innobase::create.

The is_local_ip function that used in Galera SST scripts now
incorrectly identifies ip-addresses falling under the "127.0.0.0/8"
netmask as non-local ip, although they certainly belong to the
loopback interface. This commit fixes this flaw.

don't require tar/gtar, git, getconf, groff/nroff, and ruby.

when cmake is re-run and include(FindJAVA) is skipped,
JAVA_FOUND should still be set. Same for JNI.

report correct error codes in ed25519.
Invalid value stored in the user table or an OpenSSL error is CR_ERROR.
When a user provided incorrect password when logging in -
it's CR_AUTH_USER_CREDENTIALS.

In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.

This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.

ha_innobase::open(): If the table is only being opened by purge
for evaluating virtual column values, avoid invoking
initialize_auto_increment(), because the purge thread may already
be holding an shared latch on the clustered index root page.
Shared latches are not recursive. The additional request would lead
to a hang if another thread has started waiting for an exclusive latch.

MDEV-22462: Item_in_subselect::create_single_in_to_exists_cond(JOIN *, Item **, Item **): Assertion `false' failed.

Item_in_subselect::create_single_in_to_exists_cond() should handle the
case where the subquery is a table-less select but it is not a result
of a UNION.

(Table-less subqueries like "(SELECT 1)" are "substituted" with their select
list, but table-less subqueries with WHERE or HAVING clause, like
"(SELECT 1 WHERE ...)" are not substituted. They are handled with regular
execution path)

Another batch of changes that should make the SST process
more reliable in all scenarios:

 1) Added hostname or CN verification when stunnel is used
    with certificate chain verification (verifyChain = yes);
 2) Added check for the absence of the stunnel utility for
    mtr tests;
 3) Deletion of working files before and after SST is done
    more accurately;
 4) rsync on joiner can be run even if the path to its
    configuration file contains spaces;
 5) More accurate directory creation (for data files and
    for logs);
 6) IST with mysqldump no longer turns off statement logging;
 7) Reset password for mysqldump when password is empty but
    username is specified;
 8) More reliable quoting when generating statements in
    wsrep_sst_mysqldump;
 9) Added explicit generation of 2048-bit Diffie-Hellman
    parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
    suitable server groups in configuration file, as well as
    from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
    if they implemented as built-in shell commands (unlikely
    on real systems, but more reliable).

MDEV-25562 Assertion `pause_seqno_.is_undefined() == false' failed in void wsrep::server_state::resume()

If pause() is not executed in galera and returns seqno = -1 we should
skip resume().

Another batch of changes that should make the SST process
more reliable in all scenarios:

 1) Added hostname or CN verification when stunnel is used
    with certificate chain verification (verifyChain = yes);
 2) Added check for the absence of the stunnel utility for
    mtr tests;
 3) Deletion of working files before and after SST is done
    more accurately;
 4) rsync on joiner can be run even if the path to its
    configuration file contains spaces;
 5) More accurate directory creation (for data files and
    for logs);
 6) IST with mysqldump no longer turns off statement logging;
 7) Reset password for mysqldump when password is empty but
    username is specified;
 8) More reliable quoting when generating statements in
    wsrep_sst_mysqldump;
 9) Added explicit generation of 2048-bit Diffie-Hellman
    parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
    suitable server groups in configuration file, as well as
    from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
    if they implemented as built-in shell commands (unlikely
    on real systems, but more reliable).