mysql-test/t/type_blob.test:
  Drop table in case we start from a bad state.
sql/sql_yacc.yy:
  yacc/bison is left-recursive, so FIXME statement is wrong.

Based on contributed patch from Martin Friebe, CLA from 2007-02-24.

The parser lacked support for field sizes after signed long,
when it should extend to 2**32-1.

Now, we correct that limitation, and also make the error handling
consistent for casts.


mysql-test/r/type_blob.result:
  Verify that blobs may be created with the size that is already
  documented.
  
  Additionally, test the limits of several other types.
mysql-test/t/type_blob.test:
  Verify that blobs may be created with the size that is already
  documented.
  
  Additionally, test the limits of several other types.
sql/field.cc:
  atoi() insufficient to gauge the length of some fields.  Change
  it to strtoul().
sql/item_create.cc:
  atoi() insufficient to gauge the length of some fields.  Change
  it to strtoul().
  
  If a casted length is too long, raise an error.
sql/share/errmsg.txt:
  Change ER_TOO_BIG_FIELDLENGTH so that it can accept sizes larger
  than 2**15 -- instead, 2**32.
sql/sql_yacc.yy:
  Make lengths take, in addition to NUM, LONG_NUM, ULONGLONG_NUM,
  and DECIMAL_NUM.
sql/unireg.h:
  Define new constant.

Problem: thd->thread_specific_used flag is not set executing a statement
containig connection_id() function using PS protocol, that leads to 
improper binlog event creation.

Fix: set the flag in the Item_func_connection_id::fix_fields().


sql/item_create.cc:
  Fix for bug #30200: mysqlbinlog.test: connection_id() not restored under ps-protocol
    - set the thd->thread_specific_used flag in the Item_func_connection_id::fix_fields()
      to have it properly set using PS protocol as well.
sql/item_func.cc:
  Fix for bug #30200: mysqlbinlog.test: connection_id() not restored under ps-protocol
    - set the thd->thread_specific_used flag in the Item_func_connection_id::fix_fields()
      to have it properly set using PS protocol as well.
sql/sql_parse.cc:
  Fix for bug #30200: mysqlbinlog.test: connection_id() not restored under ps-protocol
    - reset the thd->thread_specific_used flag in the mysql_reset_thd_for_next_command().

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/handler.h:
  Auto merged
sql/sql_base.cc:
  Auto merged
sql/sql_class.cc:
  Auto merged
sql/sql_class.h:
  Auto merged
sql/sql_table.cc:
  Auto merged
sql/sql_yacc.yy:
  Auto merged
sql/table.cc:
  Auto merged

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/41

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


configure.in:
  Auto merged

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/41

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


mysql-test/r/federated.result:
  Auto merged
mysql-test/t/federated.test:
  Auto merged
sql/ha_federated.h:
  Auto merged
sql/item_func.cc:
  Auto merged
sql/sql_class.h:
  Auto merged
sql/sql_table.cc:
  Auto merged
mysql-test/r/innodb_mysql.result:
  Manual merge
mysql-test/t/innodb_mysql.test:
  Manual merge

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/41

into  mysql.com:/home/ram/work/b29928.new/b29928.new.5.0

restores from mysqlbinlog out

Problem: using "mysqlbinlog | mysql" for recoveries the connection_id() 
result may differ from what was used when issuing the statement.

Fix: if there is a connection_id() in a statement, write to binlog
SET pseudo_thread_id= XXX; before it and use the value later on.


mysql-test/r/mysqlbinlog.result:
  Fix for bug #29928: INSERT ... VALUES(connection_id(), ...) incorrect 
  restores from mysqlbinlog out
    - test result.
mysql-test/t/mysqlbinlog.test:
  Fix for bug #29928: INSERT ... VALUES(connection_id(), ...) incorrect 
  restores from mysqlbinlog out
    - test case.
sql/item_create.cc:
  Fix for bug #29928: INSERT ... VALUES(connection_id(), ...) incorrect 
  restores from mysqlbinlog out
    - set thread_specific_used flag for the connection_id() function.
sql/item_func.cc:
  Fix for bug #29928: INSERT ... VALUES(connection_id(), ...) incorrect 
  restores from mysqlbinlog out
    - always return thd->variables.pseudo_thread_id as a connection_id() 
  result, as it contains a proper value for both master and slave.
sql/log_event.cc:
  Fix for bug #29928: INSERT ... VALUES(connection_id(), ...) incorrect 
  restores from mysqlbinlog out
    - set LOG_EVENT_THREAD_SPECIFIC_F event flag if thread_specific_used
  is set.
sql/sql_class.cc:
  Fix for bug #29928: INSERT ... VALUES(connection_id(), ...) incorrect 
  restores from mysqlbinlog out
    - thd->thread_specific_used introduced, which is set if thread specific 
  value(s) used in a statement.
sql/sql_class.h:
  Fix for bug #29928: INSERT ... VALUES(connection_id(), ...) incorrect 
  restores from mysqlbinlog out
    - thd->thread_specific_used introduced, which is set if thread specific 
  value(s) used in a statement.

into  production.mysql.com:/usersnfs/jperkin/bk/mysql-5.0-maint

into  production.mysql.com:/usersnfs/jperkin/bk/mysql-5.0-maint

into  production.mysql.com:/usersnfs/jperkin/bk/mysql-4.1-maint

which does not work.  Removing these attempted privileges makes
this identical to option 5 so remove it completely.  The spirit
of the program appears to be aimed at database privileges, so do
not add another option for granting global privileges as it may
be unexpected.  Fixes bug#14618 (same as previous patch, this
time applied to -maint tree).


scripts/mysql_setpermission.sh:
  Option 6 tries to apply global privileges at the database
  level which does not work - remove it.

mysql-test/r/func_time.result:
  Update results (use fixed datetime values instead of NOW()).
mysql-test/t/func_time.test:
  Use fixed datetime values instead of NOW(): the test would have a sporadic
  failure when current day changed between two consequtive calls to
  NOW(). The test actually tests FROM_DAYS/TO_DAYS functions, 
  so use of NOW() is not necessary.

into  sin.intern.azundris.com:/home/tnurnberg/10776/50-10776


configure.in:
  Auto merged

mysqld hasn't been built on AIX with ndb-everything in quite a while.
this allowed a variety of changes to be added that broke the AIX build
for both the GNU and IBM compilers (but the IBM suite in particular).
Changeset lets build to complete on AIX 5.2 for users of the GNU and
the IBM suite both. Tudo bem?


config/ac-macros/large_file.m4:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (2)
  
  we no longer declare anything large-file on AIX.  the
  GNU C++ compiler declares _LARGE_FILE_API all of its
  own, and either way we're now pulling in <standards.h>
  when on AIX, which defines _LARGE_FILE_API (if not
  already defined).
configure.in:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (1)
  
  build NDB binaries as static on AIX. because that actually
  *works*.
  
  when building dynamic, with the IBM compiler (xlC_r), and
  the build breaks on AIX due to missing symbols
  (__vec__delete2 et al.), try adding -lhC to the Makefile.
include/mysql.h:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (2)
  
  we're now pulling in <standards.h> when on AIX, which
  defines _LARGE_FILE_API (if not already defined).
ndb/src/common/util/File.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (3)
  
  do not de-scope the standards, for they may be funky macros
ndb/src/mgmclient/Makefile.am:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (4)
  
  make IBM C++ compiler happy on AIX
ndb/src/mgmsrv/Makefile.am:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (5)
  
  GNU compiler has no sense of humour about this
ndb/test/ndbapi/benchronja.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (6)
  
  MAXTHREADS collides with a #define from <sys/thread.h> on AIX
  (IBM compiler).  Call it NDB_MAXTHREADS instead.  Also explicitly
  #undef it here lest someone use it by habit and get really funny
  results.  (K&R says we may #undef non-existent symbols.)
ndb/test/ndbapi/flexAsynch.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (6)
  
  MAXTHREADS collides with a #define from <sys/thread.h> on AIX
  (IBM compiler).  Call it NDB_MAXTHREADS instead.  Also explicitly
  #undef it here lest someone use it by habit and get really funny
  results.  (K&R says we may #undef non-existent symbols.)
ndb/test/ndbapi/flexHammer.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (6)
  
  MAXTHREADS collides with a #define from <sys/thread.h> on AIX
  (IBM compiler).  Call it NDB_MAXTHREADS instead.  Also explicitly
  #undef it here lest someone use it by habit and get really funny
  results.  (K&R says we may #undef non-existent symbols.)
ndb/test/ndbapi/flexScan.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (6)
  
  MAXTHREADS collides with a #define from <sys/thread.h> on AIX
  (IBM compiler).  Call it NDB_MAXTHREADS instead.  Also explicitly
  #undef it here lest someone use it by habit and get really funny
  results.  (K&R says we may #undef non-existent symbols.)
ndb/test/ndbapi/flexTT.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (6)
  
  MAXTHREADS collides with a #define from <sys/thread.h> on AIX
  (IBM compiler).  Call it NDB_MAXTHREADS instead.  Also explicitly
  #undef it here lest someone use it by habit and get really funny
  results.  (K&R says we may #undef non-existent symbols.)
ndb/test/ndbapi/flexTimedAsynch.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (6)
  
  MAXTHREADS collides with a #define from <sys/thread.h> on AIX
  (IBM compiler).  Call it NDB_MAXTHREADS instead.  Also explicitly
  #undef it here lest someone use it by habit and get really funny
  results.  (K&R says we may #undef non-existent symbols.)
ndb/test/ndbapi/initronja.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (6)
  
  MAXTHREADS collides with a #define from <sys/thread.h> on AIX
  (IBM compiler).  Call it NDB_MAXTHREADS instead.  Also explicitly
  #undef it here lest someone use it by habit and get really funny
  results.  (K&R says we may #undef non-existent symbols.)
ndb/test/ndbapi/testOperations.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (7)
  
  IBM C compiler on AIX is not happy with the re-def.
ndb/test/ndbapi/testScanFilter.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (8)
  
  The IBM C++ compiler on AIX doesn't like initializing from pow().
  This works, but breaks a VAL (bool res_cal[TUPLE_NUM] ...) later on.
ndb/test/odbc/SQL99_test/SQL99_test.cpp:
  Bug #10776: Failure to compile ndb ReadNodesConf.cpp on AIX 5.2 (6)
  
  MAXTHREADS collides with a #define from <sys/thread.h> on AIX
  (IBM compiler).  Call it NDB_MAXTHREADS instead.  Also explicitly
  #undef it here lest someone use it by habit and get really funny
  results.  (K&R says we may #undef non-existent symbols.)

into  bodhi.(none):/opt/local/work/mysql-5.0-runtime


client/mysqldump.c:
  Auto merged
mysql-test/r/mysqldump.result:
  Auto merged
sql/sql_base.cc:
  Auto merged
sql/table.cc:
  Auto merged
mysql-test/r/innodb_mysql.result:
  Manual merge.
mysql-test/t/innodb_mysql.test:
  Manual merge.
sql/sql_table.cc:
  Manual merge.

into  moonbone.local:/mnt/gentoo64/work/24989-bug-5.0-opt-mysql

  Warning fixed.


sql/ha_innodb.cc:
  Warning fixed.

into  magare.gmz:/home/kgeorge/mysql/autopush/B27417-5.0-opt


sql/handler.cc:
  Auto merged
sql/sp_head.cc:
  Auto merged
sql/sql_class.cc:
  Auto merged
sql/sql_class.h:
  Auto merged

extend the assert so it will run the testsuite

into  mysql.com:/home/psergey/mysql-5.0-bug29582


sql/sql_select.cc:
  Auto merged
sql/sql_select.h:
  Auto merged

- Don't call mysql_select() several times for the select that enumerates
  a temporary table with the results of the UNION. Making this call for
  every subquery execution caused O(#enumerated-rows-in-the-outer-query) 
  memory allocations.
- Instead, call join->reinit() and join->exec(), and
  = disable constant table detection for such joins,  
  = provide special handling for table-less constant subqueries.


sql/sql_select.cc:
  BUG#29582: huge memory consumption with union, subselect, joins:
   - Don't mark tables as constant if JOIN::no_const_tables flag is set
sql/sql_select.h:
  BUG#29582: huge memory consumption with union, subselect, joins:
   - Don't mark tables as constant if JOIN::no_const_tables flag is set
sql/sql_union.cc:
  BUG#29582: huge memory consumption with union, subselect, joins:
  - Don't call mysql_select() several times for the select that enumerates
    a temporary table with UNION results. 
  - Instead, call join->reinit() and join->exec().
  - Provide special handling for table-less constant subqueries.

into  mysql.com:/home/hf/work/29717/my50-29717

into  gleb.loc:/home/uchum/work/bk/5.0-opt

into  gleb.loc:/home/uchum/work/bk/5.0-opt

into  mysql.com:/home/hf/work/29717/my50-29717


mysql-test/t/insert_select.test:
  Auto merged
sql/sql_select.cc:
  Auto merged
mysql-test/r/group_by.result:
  merging
mysql-test/r/insert_select.result:
  merging
mysql-test/t/group_by.test:
  merging
sql/sql_select.h:
  merging

into  mysql.com:/home/hf/work/29717/my41-29717


sql/sql_select.cc:
  Auto merged

 SELECT statement itself returns empty.

As a result of this bug 'SELECT AGGREGATE_FUNCTION(fld) ... GROUP BY'
can return one row instead of an empty result set.

When GROUP BY only has fields of constant tables
(with a single row), the optimizer deletes the group_list.
After that we lose the information about whether we had an
GROUP BY statement. Though it's important
as SELECT min(x) from empty_table; and
   SELECT min(x) from empty_table GROUP BY y; have to return
different results - the first query should return one row,
second - an empty result set.
So here we add the 'group_optimized_away' flag to remember this case
when GROUP BY exists in the query and is removed
by the optimizer, and check this flag in end_send_group()


mysql-test/r/group_by.result:
  Bug #29717 INSERT INTO SELECT inserts values even if
   SELECT statement itself returns empty.
  
  test result
mysql-test/r/insert_select.result:
  Bug #29717 INSERT INTO SELECT inserts values even if
   SELECT statement itself returns empty.
  
  test result
mysql-test/t/group_by.test:
  Bug #29717 INSERT INTO SELECT inserts values even if
   SELECT statement itself returns empty.
  
  This is additional testcase that is more basic than the
  original bug's testcase and has the same reason.
mysql-test/t/insert_select.test:
  Bug #29717 INSERT INTO SELECT inserts values even if
   SELECT statement itself returns empty.
  
  test case
sql/sql_select.cc:
  Bug #29717 INSERT INTO SELECT inserts values even if
   SELECT statement itself returns empty.
  
  Remember the 'GROUP BY was optimized away' case in the JOIN::group_optimized
  and check this in the end_send_group()
sql/sql_select.h:
  Bug #29717 INSERT INTO SELECT inserts values even if
   SELECT statement itself returns empty.
  
  JOIN::group_optimized member added to remember the 'GROUP BY optimied away'
  case

into  mysql.com:/home/kent/bk/config_h/mysql-5.0-build

to "my_config.h". Not to pollute the top directory, and to get more control
over what is included. Made the include path for "libedit" pick up its own
"config.h" first.


config/ac-macros/misc.m4:
  aclocal in automake 1.8 can't handle AC_REQUIRE on
  a user macro defined in the same included file.
cmd-line-utils/libedit/Makefile.am:
  Changed include path so that current directory is taken first, as there
  is a "config.h" there with the same name as the one in top "include".
configure.in:
  Generate "config.h" directly into "include", don't pollute top directory
include/Makefile.am:
  Copy "config.h" from current directory to "my_config.h", added note in
  the make file why there are two identical files with different name.
scripts/make_binary_distribution.sh:
  Removed copy of "config.h" from top directory, it is in "include" in a
  source tree.

into  mysql.com:/home/kent/bk/config_h/mysql-5.0-build


mysys/my_pthread.c:
  Auto merged

  Backport of correction for Mac OS X build problem, global variable not
  initiated is "common" and can't be used in shared libraries, unless
  special flags are used (bug#26218)


mysys/my_pthread.c:
  Backport of correction for Mac OS X build problem, global variable not
  initiated is "common" and can't be used in shared libraries, unless
  special flags are used (bug#26218)