------------------------------------------------------------
revno: 2572.23.1
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-03-19 09:03:08 -0300
message:
Bug#17954 Threads_connected > Threads_created

The problem is that insert delayed threads are counted as connected
but not as created, leading to a Threads_connected value greater then
the Threads_created value.

The solution is to enforce the documented behavior that the
Threads_connected value shall be the number of currently
open connections and that Threads_created shall be the
number of threads created to handle connections.

------------------------------------------------------------
revno: 2476.1116.1
committer: davi@mysql.com/endora.local
timestamp: Fri 2007-12-14 10:10:19 -0200
message:
DROP TABLE under LOCK TABLES simultaneous to a FLUSH TABLES
WITH READ LOCK (global read lock) can lead to a deadlock.

The solution is to not wait for the global read lock if the
thread is holding any locked tables.

Related to bugs 23713 and 32395. This issues is being fixed
only on 6.0 because it depends on the fix for bug 25858 --
which was fixed only on 6.0.

------------------------------------------------------------
revno: 2476.784.3
committer: davi@moksha.local
timestamp: Tue 2007-10-02 21:27:31 -0300
message:
Bug#25858 Some DROP TABLE under LOCK TABLES can cause deadlocks
        
When a client (connection) holds a lock on a table and attempts to
drop (obtain a exclusive lock) on a second table that is already
held by a second client and the second client then attempts to
drop the table that is held by the first client, leads to a
circular wait deadlock. This scenario is very similar to trying to
drop (or rename) a table while holding read locks and are
correctly forbidden.
        
The solution is to allow a drop table operation to continue only
if the table being dropped is write (exclusively) locked, or if
the table is temporary, or if the client is not holding any
locks. Using this scheme prevents the creation of a circular
chain in which each client is waiting for one table that the
next client in the chain is holding.
            
This is incompatible change, as can be seen by number of tests
cases that needed to be fixed, but is consistent with respect to
behavior of the different scenarios in which the circular wait
might happen.

revno: 2476.784.2
committer: davi@moksha.local
timestamp: Thu 2007-09-27 16:56:27 -0300 
message:
Bug#28870 check that table locks are released/reset
    
The problem is that some mysql_lock_tables error paths are not
resetting the tables lock type back to TL_UNLOCK. If the lock
types are not reset properly, a table might be returned to the
table cache with wrong lock_type.
      
The proposed fix is to ensure that the tables lock type is always
properly reset when mysql_lock_tables fails. This is a
incompatible change with respect to the process state information.

      
Just change mysql_foo to mysql_cv_foo for one cache-id variable name.  There
was only one bad variable name, present in 5.0 and 5.1, but not in the -pe
branch.


Backported to 5.6.0  (mysql-next-mr-runtime)

           STRING_RESULT argument

There is a "magic" number for precision : NOT_FIXED_DEC. 
This means that the precision is not a fixed number.
But this constant was re-defined in several files and 
was not available to the UDF developers.
 
Moved the NOT_FIXED_DEC definition to the correct header
and removed the redundant definitions.

Backported to 5.6.0  (mysql-next-mr-runtime)

Add result file format v2

Backport to 5.6.0   

Add support for being prompted for new passwords by mysqladmin instead of
specifying them on the command line. (Bug #5724, patch by Harrison Fisk)

(From: gkodinov)
Use and int * where possible to scan for trailing space in a
string instead of always iterating char-by-char.
Using the attached benchmark file on a 32 bit Intel Core 2 
Duo CPU I've got 43485 ms run with the fix compared to 44373 
without it.

Backported to 5.6.0 (next-mr-runtime)
6.0-codebase revid: 2476.1362.1

is invalid to preporcessor conditionals. Instead use
the autoconf generated macro to test the presence.

  In fact this crashes in normal (not embedded) run also.
  The problem is in the memory mapping. Handling the ha_myisammrg::extra(MMAP)
  the MERGE engine tries to mmap all the tables it unites.
  Though some can be empty and then in the mi_dynmap_file()
  we call the my_mmap(0). Normally this call returns MAP_FAILED,
  but not on FreeBSD. There it returns like a 'normal' value,
  and after the consequitive munmap systems gets unstable and
  crashes on some system call later.

per-file comments:
  storage/myisam/mi_dynrec.c
Bug #47139      Test "merge" crashes in "embedded" run
    don't try to mmap zero-length area, just return at once.

   The additional patch. That 'loadxml.test' failure was actually about our testing system,
   not the code.
   Firstly we need a new mysqltest command, wich i called 'send_eval'. So the expression
   can be evaluated, then started in a parallel thread. We only have separane 'send' and
   'eval' commands at the moment.
   Then we need to add the waiting code after the 'KILL' to our test, so the thread will be killed
   before the test goes further. The present 'reap' command doesn't handle the killed threads
   well.
      
per-file comments:
  client/mysqltest.cc
Bug#42520      killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
    The 'send_eval' command implemented.

  mysql-test/r/loadxml.result
Bug#42520      killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
   test result updated.

  mysql-test/t/loadxml.test
Bug#42520      killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
   test case added.

------------------------------------------------------------
revno: 3405
revision-id: davi.arnaut@sun.com-20090626124624-m4wolyo5193j4cu7
parent: luis.soares@sun.com-20090626113019-1j4mn1jos480u9f3
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: mysql-pe
timestamp: Fri 2009-06-26 09:46:24 -0300
message:
  Bug#45767: deprecate/remove Field::pack_key, Field::unpack_key, Field::pack_cmp
  
  Remove unused and dead code.
  
  Parts of the patch contributed by Zardosht Kasheff

------------------------------------------------------------
revno: 2476.784.4
revision-id: sp1r-davi@moksha.local-20071008114751-46069
parent: sp1r-davi@moksha.local-20071003002731-48537
committer: davi@moksha.local
timestamp: Mon 2007-10-08 08:47:51 -0300
message:
  Bug#27249 table_wild with alias: select t1.* as something

  Aliases to table wildcards are silently ignored, but they should
  not be allowed as it is non-standard and currently useless. There
  is not point in having a alias to a wildcard of column names.

  The solution is to rewrite the select_item rule so that aliases
  for table wildcards are not accepted.

  Contribution by Martin Friebe

------------------------------------------------------------
revno: 2597.4.17
revision-id: sp1r-davi@mysql.com/endora.local-20080328174753-24337
parent: sp1r-anozdrin/alik@quad.opbmk-20080328140038-16479
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 14:47:53 -0300
message:
  Bug#15192 "fatal errors" are caught by handlers in stored procedures

  The problem is that fatal errors (e.g.: out of memory) were being
  caught by stored procedure exception handlers which could cause
  the execution to not be stopped due to a continue handler.

  The solution is to not call any exception handler if the error is
  fatal and send the fatal error to the client.

------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
  Bug#41860: Without Windows named pipe

  The problem was that the patch for Bug#10374 broke named pipe
  and shared memory transports on Windows due to a failure to
  implement a dummy poll method for transports other than BSD
  sockets. Another problem was that mysqltest lacked support
  for named pipe and shared memory connections, which lead to
  misleading test cases that were supposed run common queries
  over both transports.

  The solution is to properly implement, at the VIO layer, the
  poll and is_connected methods. The is_connected method is
  implemented for every suppported transport and the poll one
  only where it makes sense. Furthermore, support for named pipe
  and shared memory connections is added to mysqltest as to
  enable testing of both transports using the test suite.

------------------------------------------------------------
revno: 2597.37.3
revision-id: sp1r-davi@mysql.com/endora.local-20080328123626-16430
parent: sp1r-anozdrin/alik@quad.opbmk-20080327125300-11290
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 09:36:26 -0300
message:
  Bug#10374 GET_LOCK does not let connection to close on the server side if it's aborted

  The problem is that the server doesn't detect aborted connections which
  are waiting on a lock or sleeping (user sleep), wasting system resources
  for a connection that is already dead.

  The solution is to peek at the connection every five seconds to verify if
  the connection is not aborted. A aborted connection is detect by polling
  the connection socket for available data to be read or end of file and in
  case of eof, the wait is aborted and the connection killed.

------------------------------------------------------------
revno: 2572.2.1
revision-id: sp1r-davi@mysql.com/endora.local-20080227225948-16317
parent: sp1r-anozdrin/alik@quad.-20080226165712-10409
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-02-27 19:59:48 -0300
message:
  Bug#27525 table not found when using multi-table-deletes with aliases over several databas
  Bug#30234 Unexpected behavior using DELETE with AS and USING

  The multi-delete statement has a documented limitation that
  cross-database multiple-table deletes using aliases are not
  supported because it fails to find the tables by alias if it
  belongs to a different database. The problem is that when
  building the list of tables to delete from, if a database
  name is not specified (maybe an alias) it defaults to the
  name of the current selected database, making impossible to
  to properly resolve tables by alias later. Another problem
  is a inconsistency of the multiple table delete syntax that
  permits ambiguities in a delete statement (aliases that refer
  to multiple different tables or vice-versa).

  The first step for a solution and proper implementation of
  the cross-databse multiple table delete is to get rid of any
  ambiguities in a multiple table statement. Currently, the parser
  is accepting multiple table delete statements that have no obvious
  meaning, such as:

  DELETE a1 FROM db1.t1 AS a1, db2.t2 AS a1;
  DELETE a1 AS a1 FROM db1.t1 AS a1, db2.t2 AS a1;

  The solution is to resolve the left part of a delete statement
  using the right part, if the a table on right has an alias,
  it must be referenced in the left using the given alias. Also,
  each table on the left side must match unambiguously only one
  table in the right side.

------------------------------------------------------------
revno: 2630.2.13
revision-id: davi@mysql.com-20080612190452-cx6h7rm557bcq7sa
parent: davi@mysql.com-20080611124915-csejwrxfdga9upho
committer: Davi Arnaut <davi@mysql.com>
branch nick: 36785-6.0
timestamp: Thu 2008-06-12 16:04:52 -0300
message:
  Bug#36785: Wrong error message when group_concat() exceeds max length

  The problem is that when ER_CUT_VALUE_GROUP_CONCAT is elevated
  to a error, the message does not get updated with the number of
  cut lines when group_concat() exceeds max length.

  The solution is to modify the warning message to be more meaningful
  by giving the number of the line that was cut and to issue the warning
  for each line that is cut. This approach is inline with how other
  per-row truncated data warnings are issued avoids violating the warning
  internal interface.

------------------------------------------------------------
revno: 2618
revision-id: sp1r-davi@mysql.com/endora.local-20080418131946-26951
parent: sp1r-davi@mysql.com/endora.local-20080417190810-26185
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-04-18 10:19:46 -0300
message:
  Bug#32140: wrong error code caught when an SF() call is interruped with KILL query

  The problem is that killing a query which calls a stored function
  could return a wrong error (table corrupt) instead of the query
  interrupted error message.

  The solution is to not set the table corrupt error if the query
  is killed, the query interrupted error message will be set  later
  when the query is finished.

------------------------------------------------------------
revno: 2630.39.3
revision-id: davi.arnaut@sun.com-20081210215359-i876m4zgc2d6rzs3
parent: kostja@sun.com-20081208222938-9es7wl61moli71ht
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 36649-6.0
timestamp: Wed 2008-12-10 19:53:59 -0200
message:
  Bug#36649: Condition area is not properly cleaned up after stored routine invocation

  The problem is that the diagnostics area of a trigger is not
  isolated from the area of the statement that caused the trigger
  invocation. In MySQL terms, it means that warnings generated
  during the execution of the trigger are not removed from the
  "warning area" at the end of the execution.

  Before this fix, the rules for MySQL message list life cycle (see
  manual entry for SHOW WARNINGS) did not apply to statements
  inside stored programs:

    - The manual says that the list of messages is cleared by a
      statement that uses a table (any table). However, such
      statement, if run inside a stored program did not clear the
      message list.
    - The manual says that the list is cleared by a statement that
      generates a new error or a warning, but this was not the case
      with stored program statements either and is changed to be the
      case as well.

  In other words, after this fix, a statement has the same effect
  on the message list regardless of whether it's executed inside a
  stored program/sub-statement or not.

  This introduces an incompatible change:

    - before this fix, a, e.g. statement inside a trigger could
      never clear the global warning list
    - after this fix, a trigger that generates a warning or uses a
      table, clears the global warning list
    - however, when we leave a trigger or a function, the caller's
      warning information is restored (see more on this below).

  This change is not backward compatible as it is intended to make
  MySQL behavior similar to the SQL standard behavior:

  A stored function or trigger will get its own "warning area" (or,
  in standard terminology, diagnostics area).  At the beginning of
  the stored function or trigger, all messages from the caller area
  will be copied to the area of the trigger.  During execution, the
  message list will be cleared according to the MySQL rules
  described on the manual (SHOW WARNINGS entry).  At the end of the
  function/trigger, the "warning area" will be destroyed along with
  all warnings it contains, except that if the last statement of
  the function/trigger generated messages, these are copied into
  the "warning area" of the caller.

  Consequently, statements that use a table or generate a warning
  *will* clear warnings inside the trigger, but that will have no
  effect to the warning list of the calling (outer) statement.

Correction of backport patch:
* Fixed signature of check_access_table() for embedded build
* Fixed typo for last argument in a check_access() call from UINT_MAX to 0.

------------------------------------------------------------
revno: 3624
revision-id: jon.hauglid@sun.com-20090928163426-2lg1gofzz44xzzxf
parent: alik@sun.com-20090928050057-r0a62x9czr01q7oe
committer: Jon Olav Hauglid <jon.hauglid@sun.com>
branch nick: mysql-6.0-codebase-bugfixing-bug47304
timestamp: Mon 2009-09-28 18:34:26 +0200
message:
  Bug #47304 Test main.mdl_sync fails on embedded server

  The problem was that SHOW PROCESSLIST was trying to access
  a thread that was not properly running and therefore had an 
  uninitialized mutex.

  This patch explicitly resets thd->mysys_var after each embedded
  server command to prevent the mutex from being accessed in an
  illegal state.

  The patch also re-enables lock_multi.test and mdl_sync.test for 
  embedded server as they had been disabled because of this bug.

------------------------------------------------------------
revno: 2617.31.21
revision-id: davi.arnaut@sun.com-20090402193933-2zbhg15kd0z3xh8r
parent: alik@sun.com-20090402081500-78l1hpkx03twe4bf
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41971-6.0
timestamp: Thu 2009-04-02 16:39:33 -0300
message:
  Bug#41971: Thread state on embedded server is always "Writing to net"
 
  The problem is that the state of a thread on a embedded server is
  always displayed as "Writing to net", which is wrong as there is
  no "network" in the embedded server.

  The solution is only exclude, on a embedded server, the thread
  state conditions that are related to network operations. Other
  thread states related to waiting on conditions or other operations
  are preserved.