/* Copyright (C) 2001-2004 MySQL AB

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; version 2 of the License.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */

/* 

   TODO: print the catalog (some USE catalog.db ????).

   Standalone program to read a MySQL binary log (or relay log);
   can read files produced by 3.23, 4.x, 5.0 servers. 

   Can read binlogs from 3.23/4.x/5.0 and relay logs from 4.x/5.0.
   Should be able to read any file of these categories, even with
   --start-position.
   An important fact: the Format_desc event of the log is at most the 3rd event
   of the log; if it is the 3rd then there is this combination:
   Format_desc_of_slave, Rotate_of_master, Format_desc_of_master.
*/

#define MYSQL_CLIENT
#undef MYSQL_SERVER
#include "client_priv.h"
#include <my_time.h>
/* That one is necessary for defines of OPTION_NO_FOREIGN_KEY_CHECKS etc */
#include "mysql_priv.h" 
#include "log_event.h"
#include "sql_common.h"

#define BIN_LOG_HEADER_SIZE	4
#define PROBE_HEADER_LEN	(EVENT_LEN_OFFSET+4)


#define CLIENT_CAPABILITIES	(CLIENT_LONG_PASSWORD | CLIENT_LONG_FLAG | CLIENT_LOCAL_FILES)

char server_version[SERVER_VERSION_LENGTH];
ulong server_id = 0;

// needed by net_serv.c
ulong bytes_sent = 0L, bytes_received = 0L;
ulong mysqld_net_retry_count = 10L;
ulong open_files_limit;
uint test_flags = 0; 
static uint opt_protocol= 0;
static FILE *result_file;

#ifndef DBUG_OFF
static const char* default_dbug_option = "d:t:o,/tmp/mysqlbinlog.trace";
#endif
static const char *load_default_groups[]= { "mysqlbinlog","client",0 };

void sql_print_error(const char *format, ...);

static bool one_database=0, to_last_remote_log= 0, disable_log_bin= 0;
static bool opt_hexdump= 0;
static const char* database= 0;
static my_bool force_opt= 0, short_form= 0, remote_opt= 0;
static ulonglong offset = 0;
static const char* host = 0;
static int port= 0;
static const char* sock= 0;
static const char* user = 0;
static char* pass = 0;
static char *charset= 0;

static ulonglong start_position, stop_position;
#define start_position_mot ((my_off_t)start_position)
#define stop_position_mot  ((my_off_t)stop_position)

static char *start_datetime_str, *stop_datetime_str;
static my_time_t start_datetime= 0, stop_datetime= MY_TIME_T_MAX;
static ulonglong rec_count= 0;
static short binlog_flags = 0; 
static MYSQL* mysql = NULL;
static const char* dirname_for_local_load= 0;
static bool stop_passed= 0;

/*
  check_header() will set the pointer below.
  Why do we need here a pointer on an event instead of an event ?
  This is because the event will be created (alloced) in read_log_event()
  (which returns a pointer) in check_header().
*/
Format_description_log_event* glob_description_event; 

static int dump_local_log_entries(PRINT_EVENT_INFO *print_event_info,
                                  const char* logname);
static int dump_remote_log_entries(PRINT_EVENT_INFO *print_event_info,
                                   const char* logname);
static int dump_log_entries(const char* logname);
static void die(const char* fmt, ...)  __attribute__ ((__noreturn__));
static MYSQL* safe_connect();


class Load_log_processor
{
  char target_dir_name[FN_REFLEN];
  int target_dir_name_len;

  /*
    When we see first event corresponding to some LOAD DATA statement in
    binlog, we create temporary file to store data to be loaded.
    We add name of this file to file_names array using its file_id as index.
    If we have Create_file event (i.e. we have binary log in pre-5.0.3
    format) we also store save event object to be able which is needed to
    emit LOAD DATA statement when we will meet Exec_load_data event.
    If we have Begin_load_query event we simply store 0 in
    File_name_record::event field.
  */
  struct File_name_record
  {
    char *fname;
    Create_file_log_event *event;
  };
  DYNAMIC_ARRAY file_names;

  /*
    Looking for new uniquie filename that doesn't exist yet by 
    adding postfix -%x

    SYNOPSIS 
       create_unique_file()
       
       filename       buffer for filename
       file_name_end  tail of buffer that should be changed
                      should point to a memory enough to printf("-%x",..)

    RETURN VALUES
      values less than 0      - can't find new filename
      values great or equal 0 - created file with found filename
  */
  File create_unique_file(char *filename, char *file_name_end)
    {
      File res;
      /* If we have to try more than 1000 times, something is seriously wrong */
      for (uint version= 0; version<1000; version++)
      {
	sprintf(file_name_end,"-%x",version);
	if ((res= my_create(filename,0,
			    O_CREAT|O_EXCL|O_BINARY|O_WRONLY,MYF(0)))!=-1)
	  return res;
      }
      return -1;
    }

public:
  Load_log_processor() {}
  ~Load_log_processor() {}

  int init()
  {
    return init_dynamic_array(&file_names, sizeof(File_name_record),
			      100,100 CALLER_INFO);
  }

  void init_by_dir_name(const char *dir)
    {
      target_dir_name_len= (convert_dirname(target_dir_name, dir, NullS) -
			    target_dir_name);
    }
  void init_by_cur_dir()
    {
      if (my_getwd(target_dir_name,sizeof(target_dir_name),MYF(MY_WME)))
	exit(1);
      target_dir_name_len= strlen(target_dir_name);
    }
  void destroy()
  {
    File_name_record *ptr= (File_name_record *)file_names.buffer;
    File_name_record *end= ptr + file_names.elements;
    for (; ptr < end; ptr++)
    {
      if (ptr->fname)
      {
        my_free(ptr->fname, MYF(MY_WME));
        delete ptr->event;
        bzero((char *)ptr, sizeof(File_name_record));
      }
    }

    delete_dynamic(&file_names);
  }

  /*
    Obtain Create_file event for LOAD DATA statement by its file_id.

    SYNOPSIS
      grab_event()
        file_id - file_id identifiying LOAD DATA statement

    DESCRIPTION
      Checks whenever we have already seen Create_file event for this file_id.
      If yes then returns pointer to it and removes it from array describing
      active temporary files. Since this moment caller is responsible for
      freeing memory occupied by this event and associated file name.

    RETURN VALUES
      Pointer to Create_file event or 0 if there was no such event
      with this file_id.
  */
  Create_file_log_event *grab_event(uint file_id)
    {
      File_name_record *ptr;
      Create_file_log_event *res;

      if (file_id >= file_names.elements)
        return 0;
      ptr= dynamic_element(&file_names, file_id, File_name_record*);
      if ((res= ptr->event))
        bzero((char *)ptr, sizeof(File_name_record));
      return res;
    }

  /*
    Obtain file name of temporary file for LOAD DATA statement by its file_id.

    SYNOPSIS
      grab_fname()
        file_id - file_id identifiying LOAD DATA statement

    DESCRIPTION
      Checks whenever we have already seen Begin_load_query event for this
      file_id. If yes then returns file name of corresponding temporary file.
      Removes record about this file from the array of active temporary files.
      Since this moment caller is responsible for freeing memory occupied by
      this name.

    RETURN VALUES
      String with name of temporary file or 0 if we have not seen Begin_load_query
      event with this file_id.
  */
  char *grab_fname(uint file_id)
    {
      File_name_record *ptr;
      char *res= 0;

      if (file_id >= file_names.elements)
        return 0;
      ptr= dynamic_element(&file_names, file_id, File_name_record*);
      if (!ptr->event)
      {
        res= ptr->fname;
        bzero((char *)ptr, sizeof(File_name_record));
      }
      return res;
    }
  int process(Create_file_log_event *ce);
  int process(Begin_load_query_log_event *ce);
  int process(Append_block_log_event *ae);
  File prepare_new_file_for_old_format(Load_log_event *le, char *filename);
  int load_old_format_file(NET* net, const char *server_fname,
			   uint server_fname_len, File file);
  int process_first_event(const char *bname, uint blen, const char *block,
                          uint block_len, uint file_id,
                          Create_file_log_event *ce);
};



File Load_log_processor::prepare_new_file_for_old_format(Load_log_event *le,
							 char *filename)
{
  uint len;
  char *tail;
  File file;
  
  fn_format(filename, le->fname, target_dir_name, "", 1);
  len= strlen(filename);
  tail= filename + len;
  
  if ((file= create_unique_file(filename,tail)) < 0)
  {
    sql_print_error("Could not construct local filename %s",filename);
    return -1;
  }
  
  le->set_fname_outside_temp_buf(filename,len+strlen(tail));
  
  return file;
}


int Load_log_processor::load_old_format_file(NET* net, const char*server_fname,
					     uint server_fname_len, File file)
{
  char buf[FN_REFLEN+1];
  buf[0] = 0;
  memcpy(buf + 1, server_fname, server_fname_len + 1);
  if (my_net_write(net, buf, server_fname_len +2) || net_flush(net))
  {
    sql_print_error("Failed  requesting the remote dump of %s", server_fname);
    return -1;
  }
  
  for (;;)
  {
    ulong packet_len = my_net_read(net);
    if (packet_len == 0)
    {
      if (my_net_write(net, "", 0) || net_flush(net))
      {
	sql_print_error("Failed sending the ack packet");
	return -1;
      }
      /*
	we just need to send something, as the server will read but
	not examine the packet - this is because mysql_load() sends 
	an OK when it is done
      */
      break;
    }
    else if (packet_len == packet_error)
    {
      sql_print_error("Failed reading a packet during the dump of %s ", 
		      server_fname);
      return -1;
    }
    
    if (packet_len > UINT_MAX)
    {
      sql_print_error("Illegal length of packet read from net");
      return -1;
    }
    if (my_write(file, (byte*) net->read_pos, 
		 (uint) packet_len, MYF(MY_WME|MY_NABP)))
      return -1;
  }
  
  return 0;
}


/*
  Process first event in the sequence of events representing LOAD DATA
  statement.

  SYNOPSIS
    process_first_event()
      bname     - base name for temporary file to be created
      blen      - base name length
      block     - first block of data to be loaded
      block_len - first block length
      file_id   - identifies LOAD DATA statement
      ce        - pointer to Create_file event object if we are processing
                  this type of event.

  DESCRIPTION
    Creates temporary file to be used in LOAD DATA and writes first block of
    data to it. Registers its file name (and optional Create_file event)
    in the array of active temporary files.

  RETURN VALUES
    0     - success
    non-0 - error
*/

int Load_log_processor::process_first_event(const char *bname, uint blen,
                                            const char *block, uint block_len,
                                            uint file_id,
                                            Create_file_log_event *ce)
{
  uint full_len= target_dir_name_len + blen + 9 + 9 + 1;
  int error= 0;
  char *fname, *ptr;
  File file;
  File_name_record rec;
  DBUG_ENTER("Load_log_processor::process_first_event");

  if (!(fname= my_malloc(full_len,MYF(MY_WME))))
    DBUG_RETURN(-1);

  memcpy(fname, target_dir_name, target_dir_name_len);
  ptr= fname + target_dir_name_len;
  memcpy(ptr,bname,blen);
  ptr+= blen;
  ptr+= my_sprintf(ptr, (ptr, "-%x", file_id));

  if ((file= create_unique_file(fname,ptr)) < 0)
  {
    sql_print_error("Could not construct local filename %s%s",
		    target_dir_name,bname);
    DBUG_RETURN(-1);
  }

  rec.fname= fname;
  rec.event= ce;

  if (set_dynamic(&file_names, (gptr)&rec, file_id))
  {
    sql_print_error("Could not construct local filename %s%s",
		    target_dir_name, bname);
    DBUG_RETURN(-1);
  }

  if (ce)
    ce->set_fname_outside_temp_buf(fname, strlen(fname));

  if (my_write(file, (byte*)block, block_len, MYF(MY_WME|MY_NABP)))
    error= -1;
  if (my_close(file, MYF(MY_WME)))
    error= -1;
  DBUG_RETURN(error);
}


int Load_log_processor::process(Create_file_log_event *ce)
{
  const char *bname= ce->fname + dirname_length(ce->fname);
  uint blen= ce->fname_len - (bname-ce->fname);

  return process_first_event(bname, blen, ce->block, ce->block_len,
                             ce->file_id, ce);
}


int Load_log_processor::process(Begin_load_query_log_event *blqe)
{
  return process_first_event("SQL_LOAD_MB", 11, blqe->block, blqe->block_len,
                             blqe->file_id, 0);
}


int Load_log_processor::process(Append_block_log_event *ae)
{
  DBUG_ENTER("Load_log_processor::process");
  const char* fname= ((ae->file_id < file_names.elements) ?
                       dynamic_element(&file_names, ae->file_id,
                                       File_name_record*)->fname : 0);

  if (fname)
  {
    File file;
    int error= 0;
    if (((file= my_open(fname,
			O_APPEND|O_BINARY|O_WRONLY,MYF(MY_WME))) < 0))
      DBUG_RETURN(-1);
    if (my_write(file,(byte*)ae->block,ae->block_len,MYF(MY_WME|MY_NABP)))
      error= -1;
    if (my_close(file,MYF(MY_WME)))
      error= -1;
    DBUG_RETURN(error);
  }

  /*
    There is no Create_file event (a bad binlog or a big
    --start-position). Assuming it's a big --start-position, we just do
    nothing and print a warning.
  */
  fprintf(stderr,"Warning: ignoring Append_block as there is no \
Create_file event for file_id: %u\n",ae->file_id);
  DBUG_RETURN(-1);
}


Load_log_processor load_processor;


static bool check_database(const char *log_dbname)
{
  return one_database &&
         (log_dbname != NULL) &&
         strcmp(log_dbname, database);
}


/*
  Process an event

  SYNOPSIS
    process_event()

  RETURN
    0           ok and continue
    1           error and terminate
    -1          ok and terminate
 
  TODO
    This function returns 0 even in some error cases. This should be changed.
*/



int process_event(PRINT_EVENT_INFO *print_event_info, Log_event *ev,
                  my_off_t pos)
{
  char ll_buff[21];
  Log_event_type ev_type= ev->get_type_code();
  DBUG_ENTER("process_event");
  print_event_info->short_form= short_form;

  /*
    Format events are not concerned by --offset and such, we always need to
    read them to be able to process the wanted events.
  */
  if ((rec_count >= offset) &&
      ((my_time_t)(ev->when) >= start_datetime) ||
      (ev_type == FORMAT_DESCRIPTION_EVENT))
  {
    if (ev_type != FORMAT_DESCRIPTION_EVENT)
    {
      /*
        We have found an event after start_datetime, from now on print
        everything (in case the binlog has timestamps increasing and
        decreasing, we do this to avoid cutting the middle).
      */
      start_datetime= 0;
      offset= 0; // print everything and protect against cycling rec_count
    }
    if (((my_time_t)(ev->when) >= stop_datetime)
        || (pos >= stop_position_mot))
    {
      stop_passed= 1; // skip all next binlogs
      DBUG_RETURN(-1);
    }
    if (!short_form)
      fprintf(result_file, "# at %s\n",llstr(pos,ll_buff));

    if (!opt_hexdump)
      print_event_info->hexdump_from= 0; /* Disabled */
    else
      print_event_info->hexdump_from= pos;

    switch (ev_type) {
    case QUERY_EVENT:
      if (check_database(((Query_log_event*)ev)->db))
        goto end;
      ev->print(result_file, print_event_info);
      break;
    case CREATE_FILE_EVENT:
    {
      Create_file_log_event* ce= (Create_file_log_event*)ev;
      /*
        We test if this event has to be ignored. If yes, we don't save
        this event; this will have the good side-effect of ignoring all
        related Append_block and Exec_load.
        Note that Load event from 3.23 is not tested.
      */
      if (check_database(ce->db))
        goto end;                // Next event
      /*
	We print the event, but with a leading '#': this is just to inform 
	the user of the original command; the command we want to execute 
	will be a derivation of this original command (we will change the 
	filename and use LOCAL), prepared in the 'case EXEC_LOAD_EVENT' 
	below.
      */
      ce->print(result_file, print_event_info, TRUE);

      // If this binlog is not 3.23 ; why this test??
      if (glob_description_event->binlog_version >= 3)
      {
	if (load_processor.process(ce))
	  break;				// Error
	ev= 0;
      }
      break;
    }
    case APPEND_BLOCK_EVENT:
      ev->print(result_file, print_event_info);
      if (load_processor.process((Append_block_log_event*) ev))
	break;					// Error
      break;
    case EXEC_LOAD_EVENT:
    {
      ev->print(result_file, print_event_info);
      Execute_load_log_event *exv= (Execute_load_log_event*)ev;
      Create_file_log_event *ce= load_processor.grab_event(exv->file_id);
      /*
	if ce is 0, it probably means that we have not seen the Create_file
	event (a bad binlog, or most probably --start-position is after the
	Create_file event). Print a warning comment.
      */
      if (ce)
      {
	ce->print(result_file, print_event_info, TRUE);
	my_free((char*)ce->fname,MYF(MY_WME));
	delete ce;
      }
      else
	fprintf(stderr,"Warning: ignoring Exec_load as there is no \
Create_file event for file_id: %u\n",exv->file_id);
      break;
    }
    case FORMAT_DESCRIPTION_EVENT:
      delete glob_description_event;
      glob_description_event= (Format_description_log_event*) ev;
      print_event_info->common_header_len= glob_description_event->common_header_len;
      ev->print(result_file, print_event_info);
      /*
        We don't want this event to be deleted now, so let's hide it (I
        (Guilhem) should later see if this triggers a non-serious Valgrind
        error). Not serious error, because we will free description_event
        later.
      */
      ev= 0;
      break;
    case BEGIN_LOAD_QUERY_EVENT:
      ev->print(result_file, print_event_info);
      load_processor.process((Begin_load_query_log_event*) ev);
      break;
    case EXECUTE_LOAD_QUERY_EVENT:
    {
      Execute_load_query_log_event *exlq= (Execute_load_query_log_event*)ev;
      char *fname= load_processor.grab_fname(exlq->file_id);

      if (check_database(exlq->db))
      {
        if (fname)
          my_free(fname, MYF(MY_WME));
        goto end;
      }

      if (fname)
      {
	exlq->print(result_file, print_event_info, fname);
	my_free(fname, MYF(MY_WME));
      }
      else
	fprintf(stderr,"Warning: ignoring Execute_load_query as there is no \
Begin_load_query event for file_id: %u\n", exlq->file_id);
      break;
    }
    default:
      ev->print(result_file, print_event_info);
    }
  }

end:
  rec_count++;
  if (ev)
    delete ev;
  DBUG_RETURN(0);
}


static struct my_option my_long_options[] =
{

#ifdef __NETWARE__
  {"autoclose", OPT_AUTO_CLOSE, "Auto close the screen on exit for Netware.",
   0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
#endif
  /*
    mysqlbinlog needs charsets knowledge, to be able to convert a charset
    number found in binlog to a charset name (to be able to print things
    like this:
    SET @`a`:=_cp850 0x4DFC6C6C6572 COLLATE `cp850_general_ci`;
  */
  {"character-sets-dir", OPT_CHARSETS_DIR,
   "Directory where character sets are.", (gptr*) &charsets_dir,
   (gptr*) &charsets_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#ifndef DBUG_OFF
  {"debug", '#', "Output debug log.", (gptr*) &default_dbug_option,
   (gptr*) &default_dbug_option, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0},
#endif
  {"database", 'd', "List entries for just this database (local log only).",
   (gptr*) &database, (gptr*) &database, 0, GET_STR_ALLOC, REQUIRED_ARG,
   0, 0, 0, 0, 0, 0},
  {"disable-log-bin", 'D', "Disable binary log. This is useful, if you "
    "enabled --to-last-log and are sending the output to the same MySQL server. "
    "This way you could avoid an endless loop. You would also like to use it "
    "when restoring after a crash to avoid duplication of the statements you "
    "already have. NOTE: you will need a SUPER privilege to use this option.",
   (gptr*) &disable_log_bin, (gptr*) &disable_log_bin, 0, GET_BOOL,
   NO_ARG, 0, 0, 0, 0, 0, 0},
  {"force-read", 'f', "Force reading unknown binlog events.",
   (gptr*) &force_opt, (gptr*) &force_opt, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
   0, 0},
  {"help", '?', "Display this help and exit.",
   0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
  {"hexdump", 'H', "Augment output with hexadecimal and ASCII event dump.",
   (gptr*) &opt_hexdump, (gptr*) &opt_hexdump, 0, GET_BOOL, NO_ARG,
   0, 0, 0, 0, 0, 0},
  {"host", 'h', "Get the binlog from server.", (gptr*) &host, (gptr*) &host,
   0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
  {"offset", 'o', "Skip the first N entries.", (gptr*) &offset, (gptr*) &offset,
   0, GET_ULL, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
  {"password", 'p', "Password to connect to remote server.",
   0, 0, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0},
  {"port", 'P', "Use port to connect to the remote server.",
   (gptr*) &port, (gptr*) &port, 0, GET_INT, REQUIRED_ARG, 0, 0, 0,
   0, 0, 0},
  {"position", 'j', "Deprecated. Use --start-position instead.",
   (gptr*) &start_position, (gptr*) &start_position, 0, GET_ULL,
   REQUIRED_ARG, BIN_LOG_HEADER_SIZE, BIN_LOG_HEADER_SIZE,
   /* COM_BINLOG_DUMP accepts only 4 bytes for the position */
   (ulonglong)(~(uint32)0), 0, 0, 0},
  {"protocol", OPT_MYSQL_PROTOCOL,
   "The protocol of connection (tcp,socket,pipe,memory).",
   0, 0, 0, GET_STR,  REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
  {"result-file", 'r', "Direct output to a given file.", 0, 0, 0, GET_STR,
   REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
  {"read-from-remote-server", 'R', "Read binary logs from a MySQL server",
   (gptr*) &remote_opt, (gptr*) &remote_opt, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
   0, 0},
  {"open_files_limit", OPT_OPEN_FILES_LIMIT,
   "Used to reserve file descriptors for usage by this program",
   (gptr*) &open_files_limit, (gptr*) &open_files_limit, 0, GET_ULONG,
   REQUIRED_ARG, MY_NFILE, 8, OS_FILE_LIMIT, 0, 1, 0},
  {"set-charset", OPT_SET_CHARSET,
   "Add 'SET NAMES character_set' to the output.", (gptr*) &charset,
   (gptr*) &charset, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
  {"short-form", 's', "Just show the queries, no extra info.",
   (gptr*) &short_form, (gptr*) &short_form, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
   0, 0},
  {"socket", 'S', "Socket file to use for connection.",
   (gptr*) &sock, (gptr*) &sock, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 
   0, 0},
  {"start-datetime", OPT_START_DATETIME,
   "Start reading the binlog at first event having a datetime equal or "
   "posterior to the argument; the argument must be a date and time "
   "in the local time zone, in any format accepted by the MySQL server "
   "for DATETIME and TIMESTAMP types, for example: 2004-12-25 11:25:56 "
   "(you should probably use quotes for your shell to set it properly).",
   (gptr*) &start_datetime_str, (gptr*) &start_datetime_str,
   0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
  {"stop-datetime", OPT_STOP_DATETIME,
   "Stop reading the binlog at first event having a datetime equal or "
   "posterior to the argument; the argument must be a date and time "
   "in the local time zone, in any format accepted by the MySQL server "
   "for DATETIME and TIMESTAMP types, for example: 2004-12-25 11:25:56 "
   "(you should probably use quotes for your shell to set it properly).",
   (gptr*) &stop_datetime_str, (gptr*) &stop_datetime_str,
   0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
  {"start-position", OPT_START_POSITION,
   "Start reading the binlog at position N. Applies to the first binlog "
   "passed on the command line.",
   (gptr*) &start_position, (gptr*) &start_position, 0, GET_ULL,
   REQUIRED_ARG, BIN_LOG_HEADER_SIZE, BIN_LOG_HEADER_SIZE,
   /* COM_BINLOG_DUMP accepts only 4 bytes for the position */
   (ulonglong)(~(uint32)0), 0, 0, 0},
  {"stop-position", OPT_STOP_POSITION,
   "Stop reading the binlog at position N. Applies to the last binlog "
   "passed on the command line.",
   (gptr*) &stop_position, (gptr*) &stop_position, 0, GET_ULL,
   REQUIRED_ARG, (ulonglong)(~(my_off_t)0), BIN_LOG_HEADER_SIZE,
   (ulonglong)(~(my_off_t)0), 0, 0, 0},
  {"to-last-log", 't', "Requires -R. Will not stop at the end of the \
requested binlog but rather continue printing until the end of the last \
binlog of the MySQL server. If you send the output to the same MySQL server, \
that may lead to an endless loop.",
   (gptr*) &to_last_remote_log, (gptr*) &to_last_remote_log, 0, GET_BOOL,
   NO_ARG, 0, 0, 0, 0, 0, 0},
  {"user", 'u', "Connect to the remote server as username.",
   (gptr*) &user, (gptr*) &user, 0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0,
   0, 0},
  {"local-load", 'l', "Prepare local temporary files for LOAD DATA INFILE in the specified directory.",
   (gptr*) &dirname_for_local_load, (gptr*) &dirname_for_local_load, 0,
   GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
  {"version", 'V', "Print version and exit.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0,
   0, 0, 0, 0, 0},
  {0, 0, 0, 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}
};


void sql_print_error(const char *format,...)
{
  va_list args;
  va_start(args, format);
  fprintf(stderr, "ERROR: ");
  vfprintf(stderr, format, args);
  fprintf(stderr, "\n");
  va_end(args);
}

static void cleanup()
{
  my_free(pass,MYF(MY_ALLOW_ZERO_PTR));
  my_free((char*) database, MYF(MY_ALLOW_ZERO_PTR));
  my_free((char*) host, MYF(MY_ALLOW_ZERO_PTR));
  my_free((char*) user, MYF(MY_ALLOW_ZERO_PTR));
  my_free((char*) dirname_for_local_load, MYF(MY_ALLOW_ZERO_PTR));
}

static void die(const char* fmt, ...)
{
  va_list args;
  va_start(args, fmt);
  fprintf(stderr, "ERROR: ");
  vfprintf(stderr, fmt, args);
  fprintf(stderr, "\n");
  va_end(args);
  cleanup();
  /* We cannot free DBUG, it is used in global destructors after exit(). */
  my_end(MY_DONT_FREE_DBUG);
  exit(1);
}

#include <help_start.h>

static void print_version()
{
  printf("%s Ver 3.2 for %s at %s\n", my_progname, SYSTEM_TYPE, MACHINE_TYPE);
  NETWARE_SET_SCREEN_MODE(1);
}


static void usage()
{
  print_version();
  puts("By Monty and Sasha, for your professional use\n\
This software comes with NO WARRANTY:  This is free software,\n\
and you are welcome to modify and redistribute it under the GPL license\n");

  printf("\
Dumps a MySQL binary log in a format usable for viewing or for piping to\n\
the mysql command line client\n\n");
  printf("Usage: %s [options] log-files\n", my_progname);
  my_print_help(my_long_options);
  my_print_variables(my_long_options);
}


static my_time_t convert_str_to_timestamp(const char* str)
{
  int was_cut;
  MYSQL_TIME l_time;
  long dummy_my_timezone;
  my_bool dummy_in_dst_time_gap;
  /* We require a total specification (date AND time) */
  if (str_to_datetime(str, strlen(str), &l_time, 0, &was_cut) !=
      MYSQL_TIMESTAMP_DATETIME || was_cut)
  {
    fprintf(stderr, "Incorrect date and time argument: %s\n", str);
    exit(1);
  }
  /*
    Note that Feb 30th, Apr 31st cause no error messages and are mapped to
    the next existing day, like in mysqld. Maybe this could be changed when
    mysqld is changed too (with its "strict" mode?).
  */
  return
    my_system_gmt_sec(&l_time, &dummy_my_timezone, &dummy_in_dst_time_gap);
}

#include <help_end.h>

extern "C" my_bool
get_one_option(int optid, const struct my_option *opt __attribute__((unused)),
	       char *argument)
{
  bool tty_password=0;
  switch (optid) {
#ifdef __NETWARE__
  case OPT_AUTO_CLOSE:
    setscreenmode(SCR_AUTOCLOSE_ON_EXIT);
    break;
#endif
#ifndef DBUG_OFF
  case '#':
    DBUG_PUSH(argument ? argument : default_dbug_option);
    break;
#endif
  case 'd':
    one_database = 1;
    break;
  case 'p':
    if (argument)
    {
      my_free(pass,MYF(MY_ALLOW_ZERO_PTR));
      char *start=argument;
      pass= my_strdup(argument,MYF(MY_FAE));
      while (*argument) *argument++= 'x';		/* Destroy argument */
      if (*start)
        start[1]=0;				/* Cut length of argument */
    }
    else
      tty_password=1;
    break;
  case 'r':
    if (!(result_file = my_fopen(argument, O_WRONLY | O_BINARY, MYF(MY_WME))))
      exit(1);
    break;
  case 'R':
    remote_opt= 1;
    break;
  case OPT_MYSQL_PROTOCOL:
  {
    if ((opt_protocol= find_type(argument, &sql_protocol_typelib,0)) <= 0)
    {
      fprintf(stderr, "Unknown option to protocol: %s\n", argument);
      exit(1);
    }
    break;
  }
  case OPT_START_DATETIME:
    start_datetime= convert_str_to_timestamp(start_datetime_str);
    break;
  case OPT_STOP_DATETIME:
    stop_datetime= convert_str_to_timestamp(stop_datetime_str);
    break;
  case 'V':
    print_version();
    exit(0);
  case '?':
    usage();
    exit(0);
  }
  if (tty_password)
    pass= get_tty_password(NullS);

  return 0;
}


static int parse_args(int *argc, char*** argv)
{
  int ho_error;

  result_file = stdout;
  load_defaults("my",load_default_groups,argc,argv);
  if ((ho_error=handle_options(argc, argv, my_long_options, get_one_option)))
    exit(ho_error);

  return 0;
}

static MYSQL* safe_connect()
{
  MYSQL *local_mysql= mysql_init(NULL);

  if (!local_mysql)
    die("Failed on mysql_init");

  if (opt_protocol)
    mysql_options(local_mysql, MYSQL_OPT_PROTOCOL, (char*) &opt_protocol);
  if (!mysql_real_connect(local_mysql, host, user, pass, 0, port, sock, 0))
  {
    char errmsg[256];
    strmake(errmsg, mysql_error(local_mysql), sizeof(errmsg)-1);
    mysql_close(local_mysql);
    die("failed on connect: %s", errmsg);
  }
  local_mysql->reconnect= 1;
  return local_mysql;
}


static int dump_log_entries(const char* logname)
{
  int rc;
  PRINT_EVENT_INFO print_event_info;
  /*
     Set safe delimiter, to dump things
     like CREATE PROCEDURE safely
  */
  fprintf(result_file, "DELIMITER /*!*/;\n");
  strcpy(print_event_info.delimiter, "/*!*/;");

  rc= (remote_opt ? dump_remote_log_entries(&print_event_info, logname) :
       dump_local_log_entries(&print_event_info, logname));

  /* Set delimiter back to semicolon */
  fprintf(result_file, "DELIMITER ;\n");
  strcpy(print_event_info.delimiter, ";");
  return rc;
}


/*
  This is not as smart as check_header() (used for local log); it will not work
  for a binlog which mixes format. TODO: fix this.
*/
static int check_master_version(MYSQL *mysql_arg,
                                Format_description_log_event
                                **description_event)
{
  MYSQL_RES* res = 0;
  MYSQL_ROW row;
  const char* version;

  if (mysql_query(mysql_arg, "SELECT VERSION()") ||
      !(res = mysql_store_result(mysql_arg)))
  {
    /* purecov: begin inspected */
    char errmsg[256];
    strmake(errmsg, mysql_error(mysql_arg), sizeof(errmsg)-1);
    mysql_close(mysql_arg);
    die("Error checking master version: %s", errmsg);
    /* purecov: end */
  }
  if (!(row = mysql_fetch_row(res)))
  {
    /* purecov: begin inspected */
    mysql_free_result(res);
    mysql_close(mysql);
    die("Master returned no rows for SELECT VERSION()");
    /* purecov: end */
  }
  if (!(version = row[0]))
  {
    /* purecov: begin inspected */
    mysql_free_result(res);
    mysql_close(mysql_arg);
    die("Master reported NULL for the version");
    /* purecov: end */
  }

  switch (*version) {
  case '3':
    *description_event= new Format_description_log_event(1);
    break;
  case '4':
    *description_event= new Format_description_log_event(3);
  case '5':
    /*
      The server is soon going to send us its Format_description log
      event, unless it is a 5.0 server with 3.23 or 4.0 binlogs.
      So we first assume that this is 4.0 (which is enough to read the
      Format_desc event if one comes).
    */
    *description_event= new Format_description_log_event(3);
    break;
  default:
    /* purecov: begin inspected */
    mysql_free_result(res);
    mysql_close(mysql_arg);
    die("Master reported unrecognized MySQL version '%s'", version);
    /* purecov: end */
  }
  mysql_free_result(res);
  return 0;
}


static int dump_remote_log_entries(PRINT_EVENT_INFO *print_event_info,
                                   const char* logname)

{
  char buf[128];
  ulong len;
  uint logname_len;
  NET* net;
  int error= 0;
  my_off_t old_off= start_position_mot;
  char fname[FN_REFLEN+1];
  DBUG_ENTER("dump_remote_log_entries");

  /*
    Even if we already read one binlog (case of >=2 binlogs on command line),
    we cannot re-use the same connection as before, because it is now dead
    (COM_BINLOG_DUMP kills the thread when it finishes).
  */
  mysql= safe_connect();
  net= &mysql->net;

  if (check_master_version(mysql, &glob_description_event))
  {
    fprintf(stderr, "Could not find server version");
    DBUG_RETURN(1);
  }
  if (!glob_description_event || !glob_description_event->is_valid())
  {
    fprintf(stderr, "Invalid Format_description log event; \
could be out of memory");
    DBUG_RETURN(1);
  }

  /*
    COM_BINLOG_DUMP accepts only 4 bytes for the position, so we are forced to
    cast to uint32.
  */
  int4store(buf, (uint32)start_position);
  int2store(buf + BIN_LOG_HEADER_SIZE, binlog_flags);

  size_s tlen = strlen(logname);
  if (tlen > UINT_MAX) 
  {
    fprintf(stderr,"Log name too long\n");
    error= 1;
    goto err;
  }
  logname_len = (uint) tlen;
  int4store(buf + 6, 0);
  memcpy(buf + 10, logname, logname_len);
  if (simple_command(mysql, COM_BINLOG_DUMP, buf, logname_len + 10, 1))
  {
    fprintf(stderr,"Got fatal error sending the log dump command\n");
    error= 1;
    goto err;
  }

  for (;;)
  {
    const char *error_msg;
    Log_event *ev;

    len= cli_safe_read(mysql);
    if (len == packet_error)
    {
      fprintf(stderr, "Got error reading packet from server: %s\n",
	      mysql_error(mysql));
      error= 1;
      goto err;
    }
    if (len < 8 && net->read_pos[0] == 254)
      break; // end of data
    DBUG_PRINT("info",( "len: %lu  net->read_pos[5]: %d\n",
			len, net->read_pos[5]));
    if (!(ev= Log_event::read_log_event((const char*) net->read_pos + 1 ,
                                        len - 1, &error_msg,
                                        glob_description_event)))
    {
      fprintf(stderr, "Could not construct log event object\n");
      error= 1;
      goto err;
    }   

    Log_event_type type= ev->get_type_code();
    if (glob_description_event->binlog_version >= 3 ||
        (type != LOAD_EVENT && type != CREATE_FILE_EVENT))
    {
      /*
        If this is a Rotate event, maybe it's the end of the requested binlog;
        in this case we are done (stop transfer).
        This is suitable for binlogs, not relay logs (but for now we don't read
        relay logs remotely because the server is not able to do that). If one
        day we read relay logs remotely, then we will have a problem with the
        detection below: relay logs contain Rotate events which are about the
        binlogs, so which would trigger the end-detection below.
      */
      if (type == ROTATE_EVENT)
      {
        Rotate_log_event *rev= (Rotate_log_event *)ev;
        /*
          If this is a fake Rotate event, and not about our log, we can stop
          transfer. If this a real Rotate event (so it's not about our log,
          it's in our log describing the next log), we print it (because it's
          part of our log) and then we will stop when we receive the fake one
          soon.
        */
        if (rev->when == 0)
        {
          if (!to_last_remote_log)
          {
            if ((rev->ident_len != logname_len) ||
                memcmp(rev->new_log_ident, logname, logname_len))
            {
              error= 0;
              goto err;
            }
            /*
              Otherwise, this is a fake Rotate for our log, at the very
              beginning for sure. Skip it, because it was not in the original
              log. If we are running with to_last_remote_log, we print it,
              because it serves as a useful marker between binlogs then.
            */
            continue;
          }
          len= 1; // fake Rotate, so don't increment old_off
        }
      }
      else if (type == FORMAT_DESCRIPTION_EVENT)
      {
        /*
          This could be an fake Format_description_log_event that server
          (5.0+) automatically sends to a slave on connect, before sending
          a first event at the requested position.  If this is the case,
          don't increment old_off. Real Format_description_log_event always
          starts from BIN_LOG_HEADER_SIZE position.
        */
        if (old_off != BIN_LOG_HEADER_SIZE)
          len= 1;         // fake event, don't increment old_off
      }
      if ((error= process_event(print_event_info, ev, old_off)))
      {
	error= ((error < 0) ? 0 : 1);
        goto err;
      }
    }
    else
    {
      Load_log_event *le= (Load_log_event*)ev;
      const char *old_fname= le->fname;
      uint old_len= le->fname_len;
      File file;

      if ((file= load_processor.prepare_new_file_for_old_format(le,fname)) < 0)
      {
        error= 1;
        goto err;
      }

      if ((error= process_event(print_event_info, ev, old_off)))
      {
        my_close(file,MYF(MY_WME));
	error= ((error < 0) ? 0 : 1);
        goto err;
      }
      error= load_processor.load_old_format_file(net,old_fname,old_len,file);
      my_close(file,MYF(MY_WME));
      if (error)
      {
        error= 1;
        goto err;
      }
    }
    /*
      Let's adjust offset for remote log as for local log to produce
      similar text and to have --stop-position to work identically.
    */
    old_off+= len-1;
  }

err:
  mysql_close(mysql);
  DBUG_RETURN(error);
}


static void check_header(IO_CACHE* file, 
                        Format_description_log_event **description_event) 
{
  byte header[BIN_LOG_HEADER_SIZE];
  byte buf[PROBE_HEADER_LEN];
  my_off_t tmp_pos, pos;

  *description_event= new Format_description_log_event(3);
  pos= my_b_tell(file);
  my_b_seek(file, (my_off_t)0);
  if (my_b_read(file, header, sizeof(header)))
    die("Failed reading header;  Probably an empty file");
  if (memcmp(header, BINLOG_MAGIC, sizeof(header)))
    die("File is not a binary log file");

  /*
    Imagine we are running with --start-position=1000. We still need
    to know the binlog format's. So we still need to find, if there is
    one, the Format_desc event, or to know if this is a 3.23
    binlog. So we need to first read the first events of the log,
    those around offset 4.  Even if we are reading a 3.23 binlog from
    the start (no --start-position): we need to know the header length
    (which is 13 in 3.23, 19 in 4.x) to be able to successfully print
    the first event (Start_log_event_v3). So even in this case, we
    need to "probe" the first bytes of the log *before* we do a real
    read_log_event(). Because read_log_event() needs to know the
    header's length to work fine.
  */
  for(;;)
  {
    tmp_pos= my_b_tell(file); /* should be 4 the first time */
    if (my_b_read(file, buf, sizeof(buf)))
    {
      if (file->error)
        die("\
Could not read entry at offset %lu : Error in log format or read error",
            tmp_pos); 
      /*
        Otherwise this is just EOF : this log currently contains 0-2
        events.  Maybe it's going to be filled in the next
        milliseconds; then we are going to have a problem if this a
        3.23 log (imagine we are locally reading a 3.23 binlog which
        is being written presently): we won't know it in
        read_log_event() and will fail().  Similar problems could
        happen with hot relay logs if --start-position is used (but a
        --start-position which is posterior to the current size of the log).
        These are rare problems anyway (reading a hot log + when we
        read the first events there are not all there yet + when we
        read a bit later there are more events + using a strange
        --start-position).
      */
      break;
    }
    else
    {
      DBUG_PRINT("info",("buf[4]=%d", buf[4]));
      /* always test for a Start_v3, even if no --start-position */
      if (buf[4] == START_EVENT_V3)       /* This is 3.23 or 4.x */
      {
        if (uint4korr(buf + EVENT_LEN_OFFSET) < 
            (LOG_EVENT_MINIMAL_HEADER_LEN + START_V3_HEADER_LEN))
        {
          /* This is 3.23 (format 1) */
          delete *description_event;
          *description_event= new Format_description_log_event(1);
        }
        break;
      }
      else if (tmp_pos >= start_position)
        break;
      else if (buf[4] == FORMAT_DESCRIPTION_EVENT) /* This is 5.0 */
      {
        my_b_seek(file, tmp_pos); /* seek back to event's start */
        if (!(*description_event= (Format_description_log_event*) 
              Log_event::read_log_event(file, *description_event)))
          /* EOF can't be hit here normally, so it's a real error */
          die("Could not read a Format_description_log_event event \
at offset %lu ; this could be a log format error or read error",
              tmp_pos); 
        DBUG_PRINT("info",("Setting description_event"));
      }
      else if (buf[4] == ROTATE_EVENT)
      {
        Log_event *ev;
        my_b_seek(file, tmp_pos); /* seek back to event's start */
        if (!(ev= Log_event::read_log_event(file, *description_event)))
          /* EOF can't be hit here normally, so it's a real error */
          die("Could not read a Rotate_log_event event at offset %lu ;"
              " this could be a log format error or read error", tmp_pos);
        delete ev;
      }
      else
        break;
    }
  }
  my_b_seek(file, pos);
}


static int dump_local_log_entries(PRINT_EVENT_INFO *print_event_info,
                                  const char* logname)
{
  File fd = -1;
  IO_CACHE cache,*file= &cache;
  byte tmp_buff[BIN_LOG_HEADER_SIZE];
  int error= 0;

  if (logname && logname[0] != '-')
  {
    if ((fd = my_open(logname, O_RDONLY | O_BINARY, MYF(MY_WME))) < 0)
      return 1;
    if (init_io_cache(file, fd, 0, READ_CACHE, start_position_mot, 0,
		      MYF(MY_WME | MY_NABP)))
    {
      my_close(fd, MYF(MY_WME));
      return 1;
    }
    check_header(file, &glob_description_event);
  }
  else // reading from stdin;
  {
    /*
      Bug fix: #23735
      Author: Chuck Bell
      Description:
        Windows opens stdin in text mode by default. Certain characters
        such as CTRL-Z are interpeted as events and the read() method
        will stop. CTRL-Z is the EOF marker in Windows. to get past this
        you have to open stdin in binary mode. Setmode() is used to set
        stdin in binary mode. Errors on setting this mode result in
        halting the function and printing an error message to stderr.
    */
#if defined (__WIN__) || (_WIN64)
    if (_setmode(fileno(stdin), O_BINARY) == -1)
    {
       fprintf(stderr, "Could not set binary mode on stdin.\n");
       return 1;
    }
#endif

    if (init_io_cache(file, fileno(stdin), 0, READ_CACHE, (my_off_t) 0,
		      0, MYF(MY_WME | MY_NABP | MY_DONT_CHECK_FILESIZE)))
      return 1;
    check_header(file, &glob_description_event);
    if (start_position)
    {
      /* skip 'start_position' characters from stdin */
      byte buff[IO_SIZE];
      my_off_t length,tmp;
      for (length= start_position_mot ; length > 0 ; length-=tmp)
      {
	tmp=min(length,sizeof(buff));
	if (my_b_read(file, buff, (uint) tmp))
        {
          error= 1;
          goto end;
        }
      }
    }
  }

  if (!glob_description_event || !glob_description_event->is_valid())
    die("Invalid Format_description log event; could be out of memory");

  if (!start_position && my_b_read(file, tmp_buff, BIN_LOG_HEADER_SIZE))
  {
    error= 1;
    goto end;
  }
  for (;;)
  {
    char llbuff[21];
    my_off_t old_off = my_b_tell(file);

    Log_event* ev = Log_event::read_log_event(file, glob_description_event);
    if (!ev)
    {
      /*
        if binlog wasn't closed properly ("in use" flag is set) don't complain
        about a corruption, but treat it as EOF and move to the next binlog.
      */
      if (glob_description_event->flags & LOG_EVENT_BINLOG_IN_USE_F)
        file->error= 0;
      else if (file->error)
      {
        fprintf(stderr,
                "Could not read entry at offset %s:"
                "Error in log format or read error\n",
                llstr(old_off,llbuff));
        error= 1;
      }
      // file->error == 0 means EOF, that's OK, we break in this case
      break;
    }
    if ((error= process_event(print_event_info, ev, old_off)))
    {
      if (error < 0)
        error= 0;
      break;
    }
  }

end:
  if (fd >= 0)
    my_close(fd, MYF(MY_WME));
  end_io_cache(file);
  delete glob_description_event;
  return error;
}


int main(int argc, char** argv)
{
  static char **defaults_argv;
  int exit_value= 0;
  ulonglong save_stop_position;
  MY_INIT(argv[0]);
  DBUG_ENTER("main");
  DBUG_PROCESS(argv[0]);

  init_time(); // for time functions

  parse_args(&argc, (char***)&argv);
  defaults_argv=argv;

  if (!argc)
  {
    usage();
    free_defaults(defaults_argv);
    exit(1);
  }

  my_set_max_open_files(open_files_limit);

  MY_TMPDIR tmpdir;
  tmpdir.list= 0;
  if (!dirname_for_local_load)
  {
    if (init_tmpdir(&tmpdir, 0))
      exit(1);
    dirname_for_local_load= my_strdup(my_tmpdir(&tmpdir), MY_WME);
  }

  if (load_processor.init())
    exit(1);
  if (dirname_for_local_load)
    load_processor.init_by_dir_name(dirname_for_local_load);
  else
    load_processor.init_by_cur_dir();

  fprintf(result_file,
	  "/*!40019 SET @@session.max_insert_delayed_threads=0*/;\n");

  if (disable_log_bin)
    fprintf(result_file,
            "/*!32316 SET @OLD_SQL_LOG_BIN=@@SQL_LOG_BIN, SQL_LOG_BIN=0*/;\n");

  /*
    In mysqlbinlog|mysql, don't want mysql to be disconnected after each
    transaction (which would be the case with GLOBAL.COMPLETION_TYPE==2).
  */
  fprintf(result_file,
          "/*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,"
          "COMPLETION_TYPE=0*/;\n");

  if (charset)
    fprintf(result_file,
            "\n/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;"
            "\n/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;"
            "\n/*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;"  
            "\n/*!40101 SET NAMES %s */;\n", charset);

  for (save_stop_position= stop_position, stop_position= ~(my_off_t)0 ;
       (--argc >= 0) && !stop_passed ; )
  {
    if (argc == 0) // last log, --stop-position applies
      stop_position= save_stop_position;
    if (dump_log_entries(*(argv++)))
    {
      exit_value=1;
      break;
    }
    // For next log, --start-position does not apply
    start_position= BIN_LOG_HEADER_SIZE;
  }

  /*
    Issue a ROLLBACK in case the last printed binlog was crashed and had half
    of transaction.
  */
  fprintf(result_file,
          "# End of log file\nROLLBACK /* added by mysqlbinlog */;\n"
          "/*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/;\n");
  if (disable_log_bin)
    fprintf(result_file, "/*!32316 SET SQL_LOG_BIN=@OLD_SQL_LOG_BIN*/;\n");

  if (charset)
    fprintf(result_file,
            "/*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */;\n"
            "/*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */;\n"
            "/*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */;\n");

  if (tmpdir.list)
    free_tmpdir(&tmpdir);
  if (result_file != stdout)
    my_fclose(result_file, MYF(0));
  cleanup();
  free_defaults(defaults_argv);
  my_free_open_file_info();
  load_processor.destroy();
  /* We cannot free DBUG, it is used in global destructors after exit(). */
  my_end(MY_DONT_FREE_DBUG);
  exit(exit_value);
  DBUG_RETURN(exit_value);			// Keep compilers happy
}

/*
  We must include this here as it's compiled with different options for
  the server
*/

#include "my_decimal.h"
#include "decimal.c"

#if defined(__WIN__) && !defined(CMAKE_BUILD)
#include "my_decimal.cpp"
#include "log_event.cpp"
#else
#include "my_decimal.cc"
#include "log_event.cc"
#endif