# Test for the new options --start-datetime, stop-datetime,
# and a few others.

--disable_warnings
drop table if exists t1;
--enable_warnings
reset master;

# We need this for getting fixed timestamps inside of this test.
# I use a date in the future to keep a growing timestamp along the
# binlog (including the Start_log_event). This test will work 
# unchanged everywhere, because mysql-test-run has fixed TZ, which it
# exports (so mysqlbinlog has same fixed TZ).
set @a=UNIX_TIMESTAMP("2020-01-21 15:32:22");
set timestamp=@a;
create table t1 (a int auto_increment not null primary key, b char(3));
insert into t1 values(null, "a");
insert into t1 values(null, "b");
set timestamp=@a+2;
insert into t1 values(null, "c");
set timestamp=@a+4;
insert into t1 values(null, "d");
insert into t1 values(null, "e");

flush logs;
set timestamp=@a+1; # this could happen on a slave
insert into t1 values(null, "f");

# delimiters are for easier debugging in future

--disable_query_log
select "--- Local --" as "";
--enable_query_log

#
# We should use --short-form everywhere because in other case output will
# be time dependent (the Start events). Better than nothing.
#

--exec $MYSQL_BINLOG --short-form $MYSQL_TEST_DIR/var/log/master-bin.000001 

--disable_query_log
select "--- offset --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --offset=2 $MYSQL_TEST_DIR/var/log/master-bin.000001 
--disable_query_log
select "--- start-position --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --start-position=497 $MYSQL_TEST_DIR/var/log/master-bin.000001 
--disable_query_log
select "--- stop-position --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --stop-position=497 $MYSQL_TEST_DIR/var/log/master-bin.000001 
--disable_query_log
select "--- start-datetime --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form "--start-datetime=2020-01-21 15:32:24" $MYSQL_TEST_DIR/var/log/master-bin.000001 
--disable_query_log
select "--- stop-datetime --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form "--stop-datetime=2020-01-21 15:32:24" $MYSQL_TEST_DIR/var/log/master-bin.000001 

--disable_query_log
select "--- Local with 2 binlogs on command line --" as "";
--enable_query_log

# This is to verify that some options apply only to first, or last binlog

--exec $MYSQL_BINLOG --short-form $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002

--disable_query_log
select "--- offset --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --offset=2 $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002
--disable_query_log
select "--- start-position --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --start-position=497 $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002
--disable_query_log
select "--- stop-position --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --stop-position=32 $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002
--disable_query_log
select "--- start-datetime --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form "--start-datetime=2020-01-21 15:32:24" $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002
--disable_query_log
select "--- stop-datetime --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form "--stop-datetime=2020-01-21 15:32:24" $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002

--disable_query_log
select "--- Remote --" as "";
--enable_query_log

--exec $MYSQL_BINLOG --short-form --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 

--disable_query_log
select "--- offset --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --offset=2 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
--disable_query_log
select "--- start-position --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --start-position=497 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
--disable_query_log
select "--- stop-position --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --stop-position=497 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
--disable_query_log
select "--- start-datetime --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form "--start-datetime=2020-01-21 15:32:24" --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001
--disable_query_log
select "--- stop-datetime --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form "--stop-datetime=2020-01-21 15:32:24" --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001

--disable_query_log
select "--- Remote with 2 binlogs on command line --" as "";
--enable_query_log

--exec $MYSQL_BINLOG --short-form --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 master-bin.000002

--disable_query_log
select "--- offset --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --offset=2 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
--disable_query_log
select "--- start-position --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --start-position=497 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
--disable_query_log
select "--- stop-position --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form --stop-position=32 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
--disable_query_log
select "--- start-datetime --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form "--start-datetime=20200121153224" --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 master-bin.000002
--disable_query_log
select "--- stop-datetime --" as "";
--enable_query_log
--exec $MYSQL_BINLOG --short-form "--stop-datetime=2020/01/21 15@32@24" --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 master-bin.000002

--disable_query_log
select "--- to-last-log --" as "";
--enable_query_log

--exec $MYSQL_BINLOG --short-form --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT --to-last-log master-bin.000001

# clean up
--disable_query_log
select "--- end of test --" as "";
--enable_query_log
drop table t1;