Test neighbors

emulation/client1.startup

-ip addr add dev eth0 10.1.0.1/24
-ip link set dev eth0 up
-
-#default route para obter conectividade internet
-ip route add 0.0.0.0/0 via 10.1.0.2
-
-# install python
-apt-get update && apt-get --assume-yes install python3 python3-pip
-
-pip-3.2 install netifaces

emulation/client1/etc/resolv.conf

-nameserver 8.8.8.8
-nameserver 8.8.4.4

emulation/client1/root/client.py

-import socket
-import struct
-import sys
-import netifaces
-
-
-def chooseInterface():
-    interfaces = netifaces.interfaces()
-    def printInterfaces():
-        print('Indique a interface de captura:')
-        for i in range(len(interfaces)):
-            print (i+1, '-', interfaces[i])
-        
-    if len(interfaces) == 1: #user has just 1 interface and any
-        return interfaces[0]
-    else:
-        printInterfaces()
-        inputValue = input('Numero da interface: ')
-
-        if int(inputValue)-1 not in range(len(interfaces)):
-            raise Exception('numero de interface invalida')
-        inputValue = interfaces[int(inputValue)-1]
-        return inputValue
-
-if not hasattr(socket, 'SO_BINDTODEVICE'):
-    socket.SO_BINDTODEVICE = 25
-
-multicast_group = '224.12.12.12'
-server_address = ('', 10000)
-
-# Create the socket
-sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-
-# Bind to the server address
-sock.bind(server_address)
-
-#interface_name = input("interface name: ")
-interface_name = chooseInterface()
-ip_interface = netifaces.ifaddresses(interface_name)[netifaces.AF_INET][0]['addr']
-
-
-# Tell the operating system to add the socket to the multicast group
-# on all interfaces.
-group = socket.inet_aton(multicast_group)
-
-sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP,
-                     socket.inet_aton(multicast_group) + socket.inet_aton(ip_interface))
-
-#sock.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, str(interface_name + "\0").encode('utf-8'))
-
-
-# Receive/respond loop
-while True:
-    #print >>sys.stderr, '\nwaiting to receive message'
-    data, address = sock.recvfrom(10240)
-    print(data.decode("utf-8"))
-
-    #print >>sys.stderr, 'received %s bytes from %s' % (len(data), address)
-    #print >>sys.stderr, data
-
-    #print >>sys.stderr, 'sending acknowledgement to', address
-    #sock.sendto('ack', address)

emulation/client1/root/server.py

-import socket
-import struct
-import sys
-import netifaces
-import traceback
-
-def chooseInterface():
-    interfaces = netifaces.interfaces()
-    def printInterfaces():
-        print('Indique a interface de captura:')
-        for i in range(len(interfaces)):
-            print (i+1, '-', interfaces[i])
-        
-    if len(interfaces) == 1: #user has just 1 interface and any
-        return interfaces[0]
-    else:
-        printInterfaces()
-        inputValue = input('Numero da interface: ')
-
-        if int(inputValue)-1 not in range(len(interfaces)):
-            raise Exception('numero de interface invalida')
-        inputValue = interfaces[int(inputValue)-1]
-        return inputValue
-
-
-
-#message = 'very important data'
-multicast_group = ('224.12.12.12', 10000)
-
-# Create the datagram socket
-sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-
-# Set the time-to-live for messages to 1 so they do not go past the
-# local network segment.
-ttl = struct.pack('b', 12)
-sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, ttl)
-
-
-interface_name = chooseInterface()
-ip_interface = netifaces.ifaddresses(interface_name)[netifaces.AF_INET][0]['addr']
-
-sock.bind((ip_interface, 10000))
-try:
-    # Look for responses from all recipients
-    while True:
-        input_msg = input('msg --> ')
-        try:
-            sock.sendto(input_msg.encode("utf-8"), multicast_group)
-
-        except:
-            traceback.print_exc()
-            continue
-            #print >>sys.stderr, 'received "%s" from %s' % (data, server)
-
-finally:
-    #print >>sys.stderr, 'closing socket'
-    sock.close()

emulation/client2.startup

-ip addr add dev eth0 10.0.2.10/24
-ip link set dev eth0 up
-
-#default route para obter conectividade internet
-ip route add 0.0.0.0/0 via 10.0.2.3
-
-# install python
-apt-get update && apt-get --assume-yes install python3 python3-pip
-
-pip-3.2 install netifaces

emulation/client2/etc/resolv.conf

-nameserver 8.8.8.8
-nameserver 8.8.4.4

emulation/client2/root/client.py

-import socket
-import struct
-import sys
-import netifaces
-
-
-def chooseInterface():
-    interfaces = netifaces.interfaces()
-    def printInterfaces():
-        print('Indique a interface de captura:')
-        for i in range(len(interfaces)):
-            print (i+1, '-', interfaces[i])
-        
-    if len(interfaces) == 1: #user has just 1 interface and any
-        return interfaces[0]
-    else:
-        printInterfaces()
-        inputValue = input('Numero da interface: ')
-
-        if int(inputValue)-1 not in range(len(interfaces)):
-            raise Exception('numero de interface invalida')
-        inputValue = interfaces[int(inputValue)-1]
-        return inputValue
-
-if not hasattr(socket, 'SO_BINDTODEVICE'):
-    socket.SO_BINDTODEVICE = 25
-
-multicast_group = '224.12.12.12'
-server_address = ('', 10000)
-
-# Create the socket
-sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-
-# Bind to the server address
-sock.bind(server_address)
-
-#interface_name = input("interface name: ")
-interface_name = chooseInterface()
-ip_interface = netifaces.ifaddresses(interface_name)[netifaces.AF_INET][0]['addr']
-
-
-# Tell the operating system to add the socket to the multicast group
-# on all interfaces.
-group = socket.inet_aton(multicast_group)
-
-sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP,
-                     socket.inet_aton(multicast_group) + socket.inet_aton(ip_interface))
-
-#sock.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, str(interface_name + "\0").encode('utf-8'))
-
-
-# Receive/respond loop
-while True:
-    #print >>sys.stderr, '\nwaiting to receive message'
-    data, address = sock.recvfrom(10240)
-    print(data.decode("utf-8"))
-
-    #print >>sys.stderr, 'received %s bytes from %s' % (len(data), address)
-    #print >>sys.stderr, data
-
-    #print >>sys.stderr, 'sending acknowledgement to', address
-    #sock.sendto('ack', address)

emulation/client2/root/server.py

-import socket
-import struct
-import sys
-import netifaces
-import traceback
-
-def chooseInterface():
-    interfaces = netifaces.interfaces()
-    def printInterfaces():
-        print('Indique a interface de captura:')
-        for i in range(len(interfaces)):
-            print (i+1, '-', interfaces[i])
-        
-    if len(interfaces) == 1: #user has just 1 interface and any
-        return interfaces[0]
-    else:
-        printInterfaces()
-        inputValue = input('Numero da interface: ')
-
-        if int(inputValue)-1 not in range(len(interfaces)):
-            raise Exception('numero de interface invalida')
-        inputValue = interfaces[int(inputValue)-1]
-        return inputValue
-
-
-
-#message = 'very important data'
-multicast_group = ('224.12.12.12', 10000)
-
-# Create the datagram socket
-sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-
-# Set the time-to-live for messages to 1 so they do not go past the
-# local network segment.
-ttl = struct.pack('b', 12)
-sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, ttl)
-
-
-interface_name = chooseInterface()
-ip_interface = netifaces.ifaddresses(interface_name)[netifaces.AF_INET][0]['addr']
-
-sock.bind((ip_interface, 10000))
-try:
-    # Look for responses from all recipients
-    while True:
-        input_msg = input('msg --> ')
-        try:
-            sock.sendto(input_msg.encode("utf-8"), multicast_group)
-
-        except:
-            traceback.print_exc()
-            continue
-            #print >>sys.stderr, 'received "%s" from %s' % (data, server)
-
-finally:
-    #print >>sys.stderr, 'closing socket'
-    sock.close()

emulation/client3.startup

-ip addr add dev eth0 10.0.3.10/24
-ip link set dev eth0 up
-
-#default route para obter conectividade internet
-ip route add 0.0.0.0/0 via 10.0.3.4
-
-# install python
-apt-get update && apt-get --assume-yes install python3 python3-pip
-
-pip-3.2 install netifaces

emulation/client3/etc/resolv.conf

-nameserver 8.8.8.8
-nameserver 8.8.4.4

emulation/client3/root/client.py

-import socket
-import struct
-import sys
-import netifaces
-
-
-def chooseInterface():
-    interfaces = netifaces.interfaces()
-    def printInterfaces():
-        print('Indique a interface de captura:')
-        for i in range(len(interfaces)):
-            print (i+1, '-', interfaces[i])
-        
-    if len(interfaces) == 1: #user has just 1 interface and any
-        return interfaces[0]
-    else:
-        printInterfaces()
-        inputValue = input('Numero da interface: ')
-
-        if int(inputValue)-1 not in range(len(interfaces)):
-            raise Exception('numero de interface invalida')
-        inputValue = interfaces[int(inputValue)-1]
-        return inputValue
-
-if not hasattr(socket, 'SO_BINDTODEVICE'):
-    socket.SO_BINDTODEVICE = 25
-
-multicast_group = '224.12.12.12'
-server_address = ('', 10000)
-
-# Create the socket
-sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-
-# Bind to the server address
-sock.bind(server_address)
-
-#interface_name = input("interface name: ")
-interface_name = chooseInterface()
-ip_interface = netifaces.ifaddresses(interface_name)[netifaces.AF_INET][0]['addr']
-
-
-# Tell the operating system to add the socket to the multicast group
-# on all interfaces.
-group = socket.inet_aton(multicast_group)
-
-sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP,
-                     socket.inet_aton(multicast_group) + socket.inet_aton(ip_interface))
-
-#sock.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, str(interface_name + "\0").encode('utf-8'))
-
-
-# Receive/respond loop
-while True:
-    #print >>sys.stderr, '\nwaiting to receive message'
-    data, address = sock.recvfrom(10240)
-    print(data.decode("utf-8"))
-
-    #print >>sys.stderr, 'received %s bytes from %s' % (len(data), address)
-    #print >>sys.stderr, data
-
-    #print >>sys.stderr, 'sending acknowledgement to', address
-    #sock.sendto('ack', address)

emulation/client3/root/server.py

-import socket
-import struct
-import sys
-import netifaces
-import traceback
-
-def chooseInterface():
-    interfaces = netifaces.interfaces()
-    def printInterfaces():
-        print('Indique a interface de captura:')
-        for i in range(len(interfaces)):
-            print (i+1, '-', interfaces[i])
-        
-    if len(interfaces) == 1: #user has just 1 interface and any
-        return interfaces[0]
-    else:
-        printInterfaces()
-        inputValue = input('Numero da interface: ')
-
-        if int(inputValue)-1 not in range(len(interfaces)):
-            raise Exception('numero de interface invalida')
-        inputValue = interfaces[int(inputValue)-1]
-        return inputValue
-
-
-
-#message = 'very important data'
-multicast_group = ('224.12.12.12', 10000)
-
-# Create the datagram socket
-sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-
-# Set the time-to-live for messages to 1 so they do not go past the
-# local network segment.
-ttl = struct.pack('b', 12)
-sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, ttl)
-
-
-interface_name = chooseInterface()
-ip_interface = netifaces.ifaddresses(interface_name)[netifaces.AF_INET][0]['addr']
-
-sock.bind((ip_interface, 10000))
-try:
-    # Look for responses from all recipients
-    while True:
-        input_msg = input('msg --> ')
-        try:
-            sock.sendto(input_msg.encode("utf-8"), multicast_group)
-
-        except:
-            traceback.print_exc()
-            continue
-            #print >>sys.stderr, 'received "%s" from %s' % (data, server)
-
-finally:
-    #print >>sys.stderr, 'closing socket'
-    sock.close()

emulation/lab.conf

@@ -2,41 +2,24 @@
 # Router setup
 #########################################
 router1[0]=A
-router1[1]=B
-router1[2]=tap,192.168.2.1,192.168.2.2
+router1[1]=tap,192.168.2.1,192.168.2.2
 router1[mem]=256
 
-router2[0]=A
-router2[1]=C
-router2[2]=F
+router2[0]=B
 router2[mem]=256
 
-router3[0]=B
-router3[1]=D
+router3[0]=C
 router3[mem]=256
 
-router4[0]=G
-router4[1]=H
+router4[0]=D
 router4[mem]=256
 
 #########################################
 # Switch setup
 #########################################
-switch1[0]=C
-switch1[1]=D
-switch1[2]=E
-switch1[3]=G
-
-
-#########################################
-# Client setup
-#########################################
-client1[0]=F
-client1[mem]=256
-
-client2[0]=E
-client2[mem]=256
-
-client3[0]=H
-client3[mem]=256
+switch1[0]=A
+switch1[1]=B
+switch1[2]=C
+switch1[3]=D
+switch1[mem]=256
 

emulation/lab.dep

-router2: router1 switch1
-router3: router1
-router4: switch1 router2 router3
-
-client1: router2
-client2: switch1 router2 router3
-client3: router4
+switch1: router1
+router2: switch1 router1
+router3: switch1 router1
+router4: switch1 router1
 

emulation/router1.startup

 ip addr add dev eth0 10.0.0.1/24
 ip link set dev eth0 up
-ip addr add dev eth1 10.0.1.1/24
-ip link set dev eth1 up
 
 
 #NAT for private ip's
-iptables -t nat -A POSTROUTING -s 0.0.0.0/0 -o eth2 -j MASQUERADE
-
-# Zebra and OSPF
-/etc/init.d/quagga restart
+iptables -t nat -A POSTROUTING -s 0.0.0.0/0 -o eth1 -j MASQUERADE
 
 apt-get update && apt-get --assume-yes install python3 python3-pip
 

emulation/router1/etc/quagga/daemons

-# This file tells the quagga package which daemons to start.
-#
-# Entries are in the format: <daemon>=(yes|no|priority)
-#   0, "no"  = disabled
-#   1, "yes" = highest priority
-#   2 .. 10  = lower priorities
-# Read /usr/share/doc/quagga/README.Debian for details.
-#
-# Sample configurations for these daemons can be found in
-# /usr/share/doc/quagga/examples/.
-#
-# ATTENTION: 
-#
-# When activation a daemon at the first time, a config file, even if it is
-# empty, has to be present *and* be owned by the user and group "quagga", else
-# the daemon will not be started by /etc/init.d/quagga. The permissions should
-# be u=rw,g=r,o=.
-# When using "vtysh" such a config file is also needed. It should be owned by
-# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
-#
-# The watchquagga daemon is always started. Per default in monitoring-only but
-# that can be changed via /etc/quagga/debian.conf.
-#
-zebra=yes
-bgpd=no
-ospfd=yes
-ospf6d=no
-ripd=no
-ripngd=no
-isisd=no
-babeld=no

emulation/router1/etc/quagga/debian.conf

-#
-# If this option is set the /etc/init.d/quagga script automatically loads
-# the config via "vtysh -b" when the servers are started. 
-# Check /etc/pam.d/quagga if you intend to use "vtysh"!
-#
-vtysh_enable=yes
-zebra_options="  --daemon -A 127.0.0.1"
-bgpd_options="   --daemon -A 127.0.0.1"
-ospfd_options="  --daemon -A 127.0.0.1"
-ospf6d_options=" --daemon -A ::1"
-ripd_options="   --daemon -A 127.0.0.1"
-ripngd_options=" --daemon -A ::1"
-isisd_options="  --daemon -A 127.0.0.1"
-babeld_options=" --daemon -A 127.0.0.1"
-#
-# Please note that watchquagga_options is an array and not a string so that
-# quotes can be used.
-#
-# The list of daemons to watch is automatically generated by the init script
-# from daemons.conf and appended to the watchquagga_options.
-# Example:
-#    watchquagga_options=("-Adz" "-r" '/sbin/service %s restart' -s '/sbin/service %s start'  -k '/sbin/service %s stop')
-watchquagga_enable=yes
-watchquagga_options=(--daemon)

emulation/router1/etc/quagga/ospfd.conf

-! -*- ospf -*-
-!
-! OSPFd sample configuration file
-!
-!
-hostname ospfd
-password zebra
-!enable password please-set-at-here
-!
-router ospf
-  network 10.0.0.0/24 area 0
-  network 10.0.1.0/24 area 0
-  network 192.168.2.0/24 area 0
-  default-information originate always
-!
-log stdout

emulation/router1/etc/quagga/vtysh.conf

-!
-! Sample configuration file for vtysh.
-!
-!service integrated-vtysh-config
-hostname quagga-router
-username root nopassword
-!

emulation/router1/etc/quagga/zebra.conf

-! -*- zebra -*-
-!
-! zebra sample configuration file
-!
-! $Id: zebra.conf.sample,v 1.1 2002/12/13 20:15:30 paul Exp $
-!
-hostname Router
-password zebra
-enable password zebra
-!
-! Interface's description. 
-!
-!interface lo
-! description test of desc.
-!
-!interface sit0
-! multicast
-
-!
-! Static default route sample.
-!
-ip route 0.0.0.0/0 192.168.2.2
-!
-
-!log file /var/log/quagga/zebra.log

emulation/router1/root/script.sh

 rm -rf MulticastRouting/
 cp -rf /hosthome/Desktop/pim/ MulticastRouting/
 cd MulticastRouting
-pip-3.2 install -r requirements.txt
+pip-3.2 install --index-url=https://pypi.python.org/simple/ -r requirements.txt
 
-python3 Run.py -stop
-python3 Run.py -start
-python3 Run.py -aiigmp eth0
-python3 Run.py -aiigmp eth1
-python3 Run.py -aiigmp eth2
-python3 Run.py -ai eth0
-python3 Run.py -ai eth1
-python3 Run.py -ai eth2
-python3 Run.py -v
+python3 Server.py

emulation/router2.startup

 ip addr add dev eth0 10.0.0.2/24
 ip link set dev eth0 up
-ip addr add dev eth1 10.0.2.2/24
-ip link set dev eth1 up
-ip addr add dev eth2 10.1.0.2/24
-ip link set dev eth2 up
 
 #default route para obter conectividade internet
-#ip route add 0.0.0.0/0 via 10.0.0.1
-#ip route del 0.0.0.0/0
+ip route add 0.0.0.0/0 via 10.0.0.1
 
 
-# Zebra and OSPF
-/etc/init.d/quagga restart
-
-# wait for default route information from OSPF
-while ! $(ip route | grep -q "default")
-do
-	sleep 2
-done
-
 # install python
 apt-get update && apt-get --assume-yes install python3 python3-pip
 

emulation/router2/etc/quagga/daemons

-# This file tells the quagga package which daemons to start.
-#
-# Entries are in the format: <daemon>=(yes|no|priority)
-#   0, "no"  = disabled
-#   1, "yes" = highest priority
-#   2 .. 10  = lower priorities
-# Read /usr/share/doc/quagga/README.Debian for details.
-#
-# Sample configurations for these daemons can be found in
-# /usr/share/doc/quagga/examples/.
-#
-# ATTENTION: 
-#
-# When activation a daemon at the first time, a config file, even if it is
-# empty, has to be present *and* be owned by the user and group "quagga", else
-# the daemon will not be started by /etc/init.d/quagga. The permissions should
-# be u=rw,g=r,o=.
-# When using "vtysh" such a config file is also needed. It should be owned by
-# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
-#
-# The watchquagga daemon is always started. Per default in monitoring-only but
-# that can be changed via /etc/quagga/debian.conf.
-#
-zebra=yes
-bgpd=no
-ospfd=yes
-ospf6d=no
-ripd=no
-ripngd=no
-isisd=no
-babeld=no

emulation/router2/etc/quagga/debian.conf

-#
-# If this option is set the /etc/init.d/quagga script automatically loads
-# the config via "vtysh -b" when the servers are started. 
-# Check /etc/pam.d/quagga if you intend to use "vtysh"!
-#
-vtysh_enable=yes
-zebra_options="  --daemon -A 127.0.0.1"
-bgpd_options="   --daemon -A 127.0.0.1"
-ospfd_options="  --daemon -A 127.0.0.1"
-ospf6d_options=" --daemon -A ::1"
-ripd_options="   --daemon -A 127.0.0.1"
-ripngd_options=" --daemon -A ::1"
-isisd_options="  --daemon -A 127.0.0.1"
-babeld_options=" --daemon -A 127.0.0.1"
-#
-# Please note that watchquagga_options is an array and not a string so that
-# quotes can be used.
-#
-# The list of daemons to watch is automatically generated by the init script
-# from daemons.conf and appended to the watchquagga_options.
-# Example:
-#    watchquagga_options=("-Adz" "-r" '/sbin/service %s restart' -s '/sbin/service %s start'  -k '/sbin/service %s stop')
-watchquagga_enable=yes
-watchquagga_options=(--daemon)

emulation/router2/etc/quagga/ospfd.conf

-! -*- ospf -*-
-!
-! OSPFd sample configuration file
-!
-!
-hostname ospfd
-password zebra
-!enable password please-set-at-here
-!
-router ospf
-  network 10.0.0.0/24 area 0
-  network 10.0.2.0/24 area 0
-  network 10.1.0.0/24 area 0
-!
-log stdout

emulation/router2/etc/quagga/vtysh.conf

-!
-! Sample configuration file for vtysh.
-!
-!service integrated-vtysh-config
-hostname quagga-router
-username root nopassword
-!

emulation/router2/etc/quagga/zebra.conf

-! -*- zebra -*-
-!
-! zebra sample configuration file
-!
-! $Id: zebra.conf.sample,v 1.1 2002/12/13 20:15:30 paul Exp $
-!
-hostname Router
-password zebra
-enable password zebra
-!
-! Interface's description. 
-!
-!interface lo
-! description test of desc.
-!
-!interface sit0
-! multicast
-
-!
-! Static default route sample.
-!
-!ip route 0.0.0.0/0 203.181.89.241
-!
-
-!log file /var/log/quagga/zebra.log

emulation/router2/root/script.sh

 rm -rf MulticastRouting/
 cp -rf /hosthome/Desktop/pim/ MulticastRouting/
 cd MulticastRouting
-pip-3.2 install -r requirements.txt
+pip-3.2 install --index-url=https://pypi.python.org/simple/ -r requirements.txt
 
-python3 Run.py -stop
-python3 Run.py -start
-python3 Run.py -aiigmp eth0
-python3 Run.py -aiigmp eth1
-python3 Run.py -aiigmp eth2
-python3 Run.py -ai eth0
-python3 Run.py -ai eth1
-python3 Run.py -ai eth2
-python3 Run.py -v
+python3 Server.py

emulation/router3.startup

-ip addr add dev eth0 10.0.1.3/24
+ip addr add dev eth0 10.0.0.3/24
 ip link set dev eth0 up
-ip addr add dev eth1 10.0.2.3/24
-ip link set dev eth1 up
 
 
 #default route para obter conectividade internet
-#ip route add 0.0.0.0/0 via 10.0.1.1
-#ip route del 0.0.0.0/0
+ip route add 0.0.0.0/0 via 10.0.0.1
 
 
-# Zebra and OSPF
-/etc/init.d/quagga restart
-
-# wait for default route information from OSPF
-while ! $(ip route | grep -q "default")
-do
-	sleep 2
-done
-
 # install python
 apt-get update && apt-get --assume-yes install python3 python3-pip
 

emulation/router3/etc/quagga/daemons

-# This file tells the quagga package which daemons to start.
-#
-# Entries are in the format: <daemon>=(yes|no|priority)
-#   0, "no"  = disabled
-#   1, "yes" = highest priority
-#   2 .. 10  = lower priorities
-# Read /usr/share/doc/quagga/README.Debian for details.
-#
-# Sample configurations for these daemons can be found in
-# /usr/share/doc/quagga/examples/.
-#
-# ATTENTION: 
-#
-# When activation a daemon at the first time, a config file, even if it is
-# empty, has to be present *and* be owned by the user and group "quagga", else
-# the daemon will not be started by /etc/init.d/quagga. The permissions should
-# be u=rw,g=r,o=.
-# When using "vtysh" such a config file is also needed. It should be owned by
-# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
-#
-# The watchquagga daemon is always started. Per default in monitoring-only but
-# that can be changed via /etc/quagga/debian.conf.
-#
-zebra=yes
-bgpd=no
-ospfd=yes
-ospf6d=no
-ripd=no
-ripngd=no
-isisd=no
-babeld=no

emulation/router3/etc/quagga/debian.conf

-#
-# If this option is set the /etc/init.d/quagga script automatically loads
-# the config via "vtysh -b" when the servers are started. 
-# Check /etc/pam.d/quagga if you intend to use "vtysh"!
-#
-vtysh_enable=yes
-zebra_options="  --daemon -A 127.0.0.1"
-bgpd_options="   --daemon -A 127.0.0.1"
-ospfd_options="  --daemon -A 127.0.0.1"
-ospf6d_options=" --daemon -A ::1"
-ripd_options="   --daemon -A 127.0.0.1"
-ripngd_options=" --daemon -A ::1"
-isisd_options="  --daemon -A 127.0.0.1"
-babeld_options=" --daemon -A 127.0.0.1"
-#
-# Please note that watchquagga_options is an array and not a string so that
-# quotes can be used.
-#
-# The list of daemons to watch is automatically generated by the init script
-# from daemons.conf and appended to the watchquagga_options.
-# Example:
-#    watchquagga_options=("-Adz" "-r" '/sbin/service %s restart' -s '/sbin/service %s start'  -k '/sbin/service %s stop')
-watchquagga_enable=yes
-watchquagga_options=(--daemon)

emulation/router3/etc/quagga/ospfd.conf

-! -*- ospf -*-
-!
-! OSPFd sample configuration file
-!
-!
-hostname ospfd
-password zebra
-!enable password please-set-at-here
-!
-router ospf
-  network 10.0.1.0/24 area 0
-  network 10.0.2.0/24 area 0
-!
-log stdout

emulation/router3/etc/quagga/vtysh.conf

-!
-! Sample configuration file for vtysh.
-!
-!service integrated-vtysh-config
-hostname quagga-router
-username root nopassword
-!

emulation/router3/etc/quagga/zebra.conf

-! -*- zebra -*-
-!
-! zebra sample configuration file
-!
-! $Id: zebra.conf.sample,v 1.1 2002/12/13 20:15:30 paul Exp $
-!
-hostname Router
-password zebra
-enable password zebra
-!
-! Interface's description. 
-!
-!interface lo
-! description test of desc.
-!
-!interface sit0
-! multicast
-
-!
-! Static default route sample.
-!
-!ip route 0.0.0.0/0 203.181.89.241
-!
-
-!log file /var/log/quagga/zebra.log

emulation/router3/root/script.sh

 rm -rf MulticastRouting/
 cp -rf /hosthome/Desktop/pim/ MulticastRouting/
 cd MulticastRouting
-pip-3.2 install -r requirements.txt
+pip-3.2 install --index-url=https://pypi.python.org/simple/ -r requirements.txt
 
-python3 Run.py -stop
-python3 Run.py -start
-python3 Run.py -aiigmp eth0
-python3 Run.py -aiigmp eth1
-python3 Run.py -ai eth0
-python3 Run.py -ai eth1
-python3 Run.py -v
+python3 Server.py

emulation/router4.startup

-ip addr add dev eth0 10.0.2.4/24
+ip addr add dev eth0 10.0.0.4/24
 ip link set dev eth0 up
-ip addr add dev eth1 10.0.3.4/24
-ip link set dev eth1 up
 
 
 #default route para obter conectividade internet
-#ip route add 0.0.0.0/0 via 10.0.1.1
-#ip route del 0.0.0.0/0
-
-
-# Zebra and OSPF
-/etc/init.d/quagga restart
-
-# wait for default route information from OSPF
-while ! $(ip route | grep -q "default")
-do
-	sleep 2
-done
+ip route add 0.0.0.0/0 via 10.0.0.1
 
 # install python
 apt-get update && apt-get --assume-yes install python3 python3-pip

emulation/router4/etc/quagga/daemons

-# This file tells the quagga package which daemons to start.
-#
-# Entries are in the format: <daemon>=(yes|no|priority)
-#   0, "no"  = disabled
-#   1, "yes" = highest priority
-#   2 .. 10  = lower priorities
-# Read /usr/share/doc/quagga/README.Debian for details.
-#
-# Sample configurations for these daemons can be found in
-# /usr/share/doc/quagga/examples/.
-#
-# ATTENTION: 
-#
-# When activation a daemon at the first time, a config file, even if it is
-# empty, has to be present *and* be owned by the user and group "quagga", else
-# the daemon will not be started by /etc/init.d/quagga. The permissions should
-# be u=rw,g=r,o=.
-# When using "vtysh" such a config file is also needed. It should be owned by
-# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
-#
-# The watchquagga daemon is always started. Per default in monitoring-only but
-# that can be changed via /etc/quagga/debian.conf.
-#
-zebra=yes
-bgpd=no
-ospfd=yes
-ospf6d=no
-ripd=no
-ripngd=no
-isisd=no
-babeld=no

emulation/router4/etc/quagga/debian.conf

-#
-# If this option is set the /etc/init.d/quagga script automatically loads
-# the config via "vtysh -b" when the servers are started. 
-# Check /etc/pam.d/quagga if you intend to use "vtysh"!
-#
-vtysh_enable=yes
-zebra_options="  --daemon -A 127.0.0.1"
-bgpd_options="   --daemon -A 127.0.0.1"
-ospfd_options="  --daemon -A 127.0.0.1"
-ospf6d_options=" --daemon -A ::1"
-ripd_options="   --daemon -A 127.0.0.1"
-ripngd_options=" --daemon -A ::1"
-isisd_options="  --daemon -A 127.0.0.1"
-babeld_options=" --daemon -A 127.0.0.1"
-#
-# Please note that watchquagga_options is an array and not a string so that
-# quotes can be used.
-#
-# The list of daemons to watch is automatically generated by the init script
-# from daemons.conf and appended to the watchquagga_options.
-# Example:
-#    watchquagga_options=("-Adz" "-r" '/sbin/service %s restart' -s '/sbin/service %s start'  -k '/sbin/service %s stop')
-watchquagga_enable=yes
-watchquagga_options=(--daemon)

emulation/router4/etc/quagga/ospfd.conf

-! -*- ospf -*-
-!
-! OSPFd sample configuration file
-!
-!
-hostname ospfd
-password zebra
-!enable password please-set-at-here
-!
-router ospf
-  network 10.0.2.0/24 area 0
-  network 10.0.3.0/24 area 0
-!
-log stdout

emulation/router4/etc/quagga/vtysh.conf

-!
-! Sample configuration file for vtysh.
-!
-!service integrated-vtysh-config
-hostname quagga-router
-username root nopassword
-!

emulation/router4/etc/quagga/zebra.conf

-! -*- zebra -*-
-!
-! zebra sample configuration file
-!
-! $Id: zebra.conf.sample,v 1.1 2002/12/13 20:15:30 paul Exp $
-!
-hostname Router
-password zebra
-enable password zebra
-!
-! Interface's description. 
-!
-!interface lo
-! description test of desc.
-!
-!interface sit0
-! multicast
-
-!
-! Static default route sample.
-!
-!ip route 0.0.0.0/0 203.181.89.241
-!
-
-!log file /var/log/quagga/zebra.log

emulation/router4/root/script.sh

 rm -rf MulticastRouting/
 cp -rf /hosthome/Desktop/pim/ MulticastRouting/
 cd MulticastRouting
-pip-3.2 install -r requirements.txt
+pip-3.2 install --index-url=https://pypi.python.org/simple/ -r requirements.txt
 
-python3 Run.py -stop
-python3 Run.py -start
-python3 Run.py -aiigmp eth0
-python3 Run.py -aiigmp eth1
-python3 Run.py -ai eth0
-python3 Run.py -ai eth1
-python3 Run.py -v
+python3 Server.py

emulation/switch1.startup

@@ -8,9 +8,17 @@ brctl addif br0 eth1
 brctl addif br0 eth2
 brctl addif br0 eth3
 ip link set dev br0 up
+ip addr add dev br0 10.0.0.5/24
 
+#default route para obter conectividade internet
+ip route add 0.0.0.0/0 via 10.0.0.1
+
+# install python
+apt-get update && apt-get --assume-yes install python3 python3-pip
 
 # identify ports with routers (they need to receive all multicast traffic!)
 echo "2" > /sys/devices/virtual/net/br0/brif/eth0/multicast_router
 echo "2" > /sys/devices/virtual/net/br0/brif/eth1/multicast_router
+echo "2" > /sys/devices/virtual/net/br0/brif/eth2/multicast_router
 echo "2" > /sys/devices/virtual/net/br0/brif/eth3/multicast_router
+

emulation/switch1/root/script.sh

+rm -rf test/
+cp -rf /hosthome/PycharmProjects/RPC/ test/
+cd test
+pip-3.2 install --index-url=https://pypi.python.org/simple/ -r requirements.txt
+
+python3 Client.py