Update tests to work with setuptools 36. Fixes #398 (#400)

doc/topics/optimizing.rst

@@ -34,7 +34,7 @@ Buildout work better:
     >>> [abieggs] = ls(join('home', '.buildout', 'eggs'))
     >>> eqs([n.split('-', 1)[0]
     ...      for n in ls('home', '.buildout', 'eggs', abieggs)],
-    ...     'bobo', 'WebOb')
+    ...     'bobo', 'WebOb', 'six')
 
 You might be wondering why these settings aren't the default, if
 they're recommended for everyone.  They probably *should* be the

doc/topics/variables-extending-and-substitutions.rst

@@ -256,7 +256,7 @@ is typically used to set up a shared egg or cache directory, as in:
     >>> [abieggs] = ls(join('home', '.buildout', 'eggs'))
     >>> eqs([n.split('-', 1)[0]
     ...      for n in ls('home', '.buildout', 'eggs', abieggs)],
-    ...     'bobo', 'WebOb')
+    ...     'bobo', 'WebOb', 'six')
 
     >>> clear_here()
 

src/zc/buildout/buildout.txt

@@ -55,9 +55,7 @@ The ``bin`` directory contains scripts::
 The ``eggs`` directory has installed distributions:
 
     >>> ls(sample_buildout, 'eggs')
-    d...
     -  setuptools-0.7-py3.3.egg
-    ...
     -  zc.buildout.egg-link
 
 The ``develop-eggs`` and ``parts`` directories are initially empty::
@@ -2772,7 +2770,7 @@ database is shown::
     We have a develop egg: zc.buildout 1.0.0.
     We have the best distribution that satisfies 'setuptools'.
     Picked: setuptools = 0.7
-    ...
+    <BLANKLINE>
     Configuration data:
     [buildout]
     allow-hosts = *
@@ -3037,9 +3035,7 @@ We also get other buildout artifacts::
 
     >>> _ = (ls(sample_bootstrapped, 'eggs'),
     ...      ls(sample_bootstrapped, 'develop-eggs'))
-    d...
     -  setuptools-0.7-py2.3.egg
-    ...
     -  zc.buildout-1.0-py2.3.egg
 
 (We list both the ``eggs`` and ``develop-eggs`` directories because the

src/zc/buildout/repeatable.txt

@@ -131,7 +131,6 @@ specifying a versions section:
     We have a develop egg: zc.buildout 1.0.0.
     We have the best distribution that satisfies 'setuptools'.
     Picked: setuptools = 0.6
-    ...
     Installing 'spam'.
     We have the best distribution that satisfies 'spam'.
     Picked: spam = 2.
@@ -154,7 +153,6 @@ If we run the buildout with the versions section:
     We have a develop egg: zc.buildout 1.0.0.
     We have the best distribution that satisfies 'setuptools'.
     Picked: setuptools = 0.6
-    ...
     Installing 'spam'.
     We have the distribution that satisfies 'spam==1'.
     Uninstalling foo.
@@ -186,7 +184,6 @@ versions for.
     We have a develop egg: zc.buildout 1.0.0.
     We have the best distribution that satisfies 'setuptools'.
     Picked: setuptools = 0.6
-    ...
     Installing 'spam >0'.
     We have the distribution that satisfies 'spam==1'.
     Uninstalling foo.
@@ -296,11 +293,8 @@ versions it picked at the end of its run:
     Versions had to be automatically picked.
     The following part definition lists the versions picked:
     [versions]
-    ...
     setuptools = 0.6.99
-    ...
     spam = 2
-    ...
 
 When everything is pinned, no output is generated:
 
@@ -321,7 +315,6 @@ When everything is pinned, no output is generated:
     >>> print_(system(buildout), end='') # doctest: +ELLIPSIS
     Updating foo.
     recipe v2
-    ...
 
 The Python package index is case-insensitive. Both
 http://pypi.python.org/simple/Django/ and
@@ -346,7 +339,6 @@ and case differences won't impact the pinning:
     >>> print_(system(buildout), end='') # doctest: +ELLIPSIS
     Updating foo.
     recipe v2
-    ...
 
 Sometimes it is handy to have a separate file with versions. This is a regular
 buildout file with a single ``[versions]`` section. You include it by
@@ -372,7 +364,6 @@ extending from that versions file:
     >>> print_(system(buildout), end='') # doctest: +ELLIPSIS
     Updating foo.
     recipe v2
-    ...
 
 If not everything is pinned and buildout has to pick versions, you can tell
 buildout to append the versions to your versions file. It simply appends them
@@ -401,9 +392,7 @@ at the end.
     Versions had to be automatically picked.
     The following part definition lists the versions picked:
     [versions]
-    ...
     spam = 2
-    ...
     Picked versions have been written to my_versions.cfg
 
 The versions file now contains the extra pin:
@@ -411,12 +400,9 @@ The versions file now contains the extra pin:
     >>> print_(open('my_versions.cfg').read()) # doctest: +ELLIPSIS
     <BLANKLINE>
     ...
-    <BLANKLINE>
     # Added by buildout at YYYY-MM-DD hh:mm:ss.dddddd
-    ...
     spam = 2
     <BLANKLINE>
-    ...
 
 And re-running buildout doesn't report any picked versions anymore:
 
@@ -453,13 +439,12 @@ The versions file contains the extra pin:
 
     >>> print_(open('my_versions.cfg').read()) # doctest: +ELLIPSIS
     <BLANKLINE>
+    [versions]
     ...
     <BLANKLINE>
     # Added by buildout at YYYY-MM-DD hh:mm:ss.dddddd
-    ...
     spam = 2
     <BLANKLINE>
-    ...
 
 Because buildout now includes buildout-versions' (and part of the older
 buildout.dumppickedversions') functionality, it warns if these extensions are

src/zc/buildout/tests.py

@@ -341,12 +341,12 @@ If we use the verbose switch, we can see where requirements are coming from:
     We have a develop egg: zc.buildout 1.0.0
     We have the best distribution that satisfies 'setuptools'.
     Picked: setuptools = 0.7
-    ...
     Develop: '/sample-buildout/sampley'
     Develop: '/sample-buildout/samplez'
     Develop: '/sample-buildout/samplea'
     Develop: '/sample-buildout/sampleb'
-    ...Installing eggs.
+    ...
+    Installing eggs.
     Installing 'samplea', 'samplez'.
     We have a develop egg: samplea 1
     We have a develop egg: samplez 1
@@ -465,7 +465,6 @@ We do not need to run in verbose mode for that to work:
     Versions had to be automatically picked.
     The following part definition lists the versions picked:
     [versions]
-    ...
     <BLANKLINE>
     # Required by:
     # sampley==1
@@ -866,9 +865,7 @@ On the other hand, if we have a zipped egg, rather than a develop egg:
     -  zc.recipe.egg.egg-link
 
     >>> ls('eggs') # doctest: +ELLIPSIS
-    d...
     -  foox-0.0.0-py2.4.egg
-    ...
     d  setuptools.eggpyN.N.egg
     ...
 
@@ -1799,7 +1796,6 @@ def install_source_dist_with_bad_py():
     ...
 
     >>> ls('eggs') # doctest: +ELLIPSIS
-    d...
     d  badegg-1-py2.4.egg
     ...
 
@@ -2095,13 +2091,13 @@ def dealing_with_extremely_insane_dependencies():
     We have a develop egg: zc.buildout 1.0.0
     We have the best distribution that satisfies 'setuptools'.
     Picked: setuptools = 0.7
-    ...
     Develop: '/sample-buildout/pack0'
     Develop: '/sample-buildout/pack1'
     Develop: '/sample-buildout/pack2'
     Develop: '/sample-buildout/pack3'
     Develop: '/sample-buildout/pack4'
-    ...Installing pack1.
+    ...
+    Installing pack1.
     Installing 'pack0'.
     We have a develop egg: pack0 0.0.0
     Getting required 'pack4'
@@ -2989,7 +2985,6 @@ def bootstrap_honors_relative_paths():
     sys.path[0:0] = [
       ...
       join(base, 'eggs/setuptools-0.7-py2.7.egg'),
-      ...
       ]
     <BLANKLINE>
     import zc.buildout.buildout
@@ -3105,9 +3100,7 @@ def test_abi_tag_eggs():
     d  parts
     >>> from zc.buildout.pep425tags import get_abi_tag
     >>> ls(join('eggs', get_abi_tag())) # doctest: +ELLIPSIS
-    d...
     d  setuptools-34.0.3-py3.5.egg
-    ...
     """
 
 def test_buildout_doesnt_keep_adding_itself_to_versions():
@@ -3138,7 +3131,6 @@ def test_buildout_doesnt_keep_adding_itself_to_versions():
     <BLANKLINE>
     # Added by buildout...
     setuptools = 34.0.3
-    ...
     >>> _ = system(join('bin', 'buildout'))
     >>> _ = system(join('bin', 'buildout'))
 

src/zc/buildout/update.txt

@@ -7,10 +7,8 @@ demonstrate this, we've created some "new releases" of buildout and
 setuptools in a new_releases folder:
 
     >>> ls(new_releases)
-    d...
     d  setuptools
     -  setuptools-99.99-py2.4.egg
-    ...
     d  zc.buildout
     -  zc.buildout-99.99-py2.4.egg
 
@@ -72,7 +70,6 @@ new versions found in new releases:
     Got zc.buildout 99.99.
     Getting distribution for 'setuptools'.
     Got setuptools 99.99.
-    ...
     Upgraded:
       zc.buildout version 99.99,
       setuptools version 99.99;
@@ -92,7 +89,6 @@ Our buildout script has been updated to use the new eggs:
     sys.path[0:0] = [
       '/sample-buildout/eggs/zc.buildout-99.99-py2.4.egg',
       '/sample-buildout/eggs/setuptools-99.99-py2.4.egg',
-      ...
       ]
     <BLANKLINE>
     import zc.buildout.buildout
@@ -232,7 +228,6 @@ directory:
     sys.path[0:0] = [
       join(base, 'eggs/zc.buildout-99.99-py3.3.egg'),
       join(base, 'eggs/setuptools-99.99-py3.3.egg'),
-      ...
       ]
     <BLANKLINE>
     import zc.buildout.buildout

zc.recipe.egg_/src/zc/recipe/egg/README.rst

@@ -72,12 +72,9 @@ Let's run the buildout:
 Now, if we look at the buildout eggs directory:
 
     >>> ls(sample_buildout, 'eggs')
-    d...
     d  demo-0.2-py2.3.egg
     d  demoneeded-1.1-py2.3.egg
-    ...
     -  setuptools-0.7-py2.3.egg
-    ...
     d  zc.buildout-1.0-py2.3.egg
 
 We see that we got an egg for demo that met the requirement, as well
@@ -264,12 +261,9 @@ We'll also run the buildout in off-line mode:
 We didn't get an update for demo:
 
     >>> ls(sample_buildout, 'eggs')
-    d...
     d  demo-0.2-py2.3.egg
     d  demoneeded-1.1-py2.3.egg
-    ...
     -  setuptools-0.7-py2.3.egg
-    ...
     d  zc.buildout-1.0-py2.3.egg
 
 If we run the buildout on the default online and newest modes,
@@ -284,13 +278,10 @@ we'll get an update for demo:
 Then we'll get a new demo egg:
 
     >>> ls(sample_buildout, 'eggs')
-    d...
     d  demo-0.2-py2.3.egg
     d  demo-0.3-py2.3.egg
     d  demoneeded-1.1-py2.3.egg
-    ...
     -  setuptools-0.7-py2.4.egg
-    ...
     d  zc.buildout-1.0-py2.4.egg
 
 The script is updated too: