zc.buildout 3.0.1+slapos001: Rebase on zc.buildout 3.0.1

See merge request nexedi/slapos.buildout!30

doc/getting-started.rst

@@ -28,11 +28,15 @@ The recommended way to install Buildout is to use pip within a virtual environme
 
 .. code-block:: console
 
-  virtualenv mybuildout
-  cd mybuildout
-  bin/pip install zc.buildout
+  python3 -m venv myenv
+  source myenv/bin/activate
+  pip install zc.buildout
 
+Or for the code from master branch:
 
+.. code-block:: console
+
+  pip install https://lab.nexedi.com/nexedi/slapos.buildout/-/archive/master/slapos.buildout-master.tar.gz
 
 To use Buildout, you need to provide a Buildout configuration. Here is
 a minimal configuration:
@@ -98,6 +102,33 @@ specified using *parts*.  The parts to be built are listed in the
 name that specifies the software to build the part and provides
 parameters to control how the part is built.
 
+
+Bootstrapping an isolated environment
+=====================================
+
+Sometimes it is useful to install ``zc.buildout`` and its dependencies
+directly in ``eggs`` directory and to generate a ``buildout`` script in
+the ``bin`` directory that uses the version in ``eggs`` directory,
+instead of relying on the package available in the environment.
+
+One way to achieve this uses the ``extra-paths`` option of ``buildout``
+section: by setting it to empty value, packages outside of ``eggs``
+or ``develop-eggs`` directories will not be considered when looking
+for already installed eggs. Then the ``bootstrap`` command will
+install ``zc.buildout`` and its dependencies from scratch in ``eggs``.
+
+.. code-block:: console
+
+  buildout buildout:extra-paths= bootstrap
+
+After this, the generated ``bin/buildout`` script will use the packages
+installed in ``eggs`` directory instead of those in the environment and
+preserve the isolation from the environment, even without setting
+``extra-paths``. That is because the default value for ``extra-paths``
+only considers the paths where ``zc.buildout`` and its dependencies are
+found, and in this case that is only the ``eggs`` directory.
+
+
 Installing software
 ===================
 

doc/reference.rst

@@ -358,6 +358,19 @@ extends-cache
   substitutions, and the result is a relative path, then it will be
   interpreted relative to the buildout directory.)
 
+.. _extra-paths-buildout-option
+
+extra-paths, default: 'zc.buildout'
+  Extra paths to scan for already installed distributions.
+
+  Setting this to an empty value enables isolation of buildout.
+  Setting this to 'legacy' enables the legacy behavior of
+  scanning the paths of the distributions of zc.buildout itself
+  and its dependencies, which may contain sites-packages or not.
+  Setting this to 'zc.buildout' also scans the paths of the
+  current zc.buildout and dependencies, but respects the order
+  they appear in sys.path, avoiding unexpected results.
+
 .. _find-links-option:
 
 find-links, default: ''

setup.py

@@ -12,7 +12,7 @@
 #
 ##############################################################################
 name = "zc.buildout"
-version = '3.0.1'
+version = '3.0.1+slapos001'
 
 import os
 from setuptools import setup
@@ -47,7 +47,7 @@ setup(
     python_requires = '>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*',
     namespace_packages = ['zc'],
     install_requires = [
-        'setuptools>=8.0',
+        'setuptools>=38.2.3',
         'pip',
         'wheel',
     ],

src/zc/buildout/__init__.py

@@ -49,3 +49,16 @@ class UserError(Exception):
 
     def __str__(self):
         return " ".join(map(str, self.args))
+
+# Used for Python 2-3 compatibility
+if str is bytes: # BBB Py2
+    bytes2str = str2bytes = lambda s: s
+    def unicode2str(s):
+        return s.encode('utf-8')
+else:
+    def bytes2str(s):
+        return s.decode()
+    def str2bytes(s):
+        return s.encode()
+    def unicode2str(s):
+        return s

src/zc/buildout/buildout.py

@@ -29,10 +29,21 @@ try:
 except ImportError:
     from UserDict import DictMixin
 
+try:
+    from cStringIO import StringIO
+except ImportError:
+    from io import StringIO
+
+try:
+    from urllib.parse import urljoin
+except ImportError: # BBB Py2
+    from urlparse import urljoin
+
 import zc.buildout.configparser
 import copy
 import datetime
 import distutils.errors
+import errno
 import glob
 import importlib
 import inspect
@@ -45,8 +56,10 @@ import shutil
 import subprocess
 import sys
 import tempfile
+import pprint
 import zc.buildout
 import zc.buildout.download
+from functools import partial
 
 PY3 = sys.version_info[0] == 3
 if PY3:
@@ -82,6 +95,66 @@ def print_(*args, **kw):
         file = sys.stdout
     file.write(sep.join(map(str, args))+end)
 
+_MARKER = []
+
+class BuildoutSerialiser(object):
+    # XXX: I would like to access pprint._safe_repr, but it's not
+    # officially available. PrettyPrinter class has a functionally-speaking
+    # static method "format" which just calls _safe_repr, but it is not
+    # declared as static... So I must create an instance of it.
+    _format = pprint.PrettyPrinter().format
+    _dollar = '\\x%02x' % ord('$')
+    _semicolon = '\\x%02x' % ord(';')
+    _safe_globals = {'__builtins__': {
+        # Types which are represented as calls to their constructor.
+        'bytearray': bytearray,
+        'complex': complex,
+        'frozenset': frozenset,
+        'set': set,
+        # Those buildins are available through keywords, which allow creating
+        # instances which in turn give back access to classes. So no point in
+        # hiding them.
+        'dict': dict,
+        'list': list,
+        'str': str,
+        'tuple': tuple,
+        'False': False,
+        'True': True,
+        'None': None,
+    }}
+
+    def loads(self, value):
+        return eval(value, self._safe_globals)
+
+    def dumps(self, value):
+        value, isreadable, _ = self._format(value, {}, 0, 0)
+        if not isreadable:
+            raise ValueError('Value cannot be serialised: %s' % (value, ))
+        return value.replace('$', self._dollar).replace(';', self._semicolon)
+
+SERIALISED_VALUE_MAGIC = '!py'
+SERIALISED = re.compile(SERIALISED_VALUE_MAGIC + '([^!]*)!(.*)')
+SERIALISER_REGISTRY = {
+    '': BuildoutSerialiser(),
+}
+SERIALISER_VERSION = ''
+SERIALISER = SERIALISER_REGISTRY[SERIALISER_VERSION]
+# Used only to compose data
+SERIALISER_PREFIX = SERIALISED_VALUE_MAGIC + SERIALISER_VERSION + '!'
+assert SERIALISED.match(SERIALISER_PREFIX).groups() == (
+    SERIALISER_VERSION, ''), SERIALISED.match(SERIALISER_PREFIX).groups()
+
+def dumps(value):
+    orig_value = value
+    value = SERIALISER.dumps(value)
+    assert SERIALISER.loads(value) == orig_value, (repr(value), orig_value)
+    return SERIALISER_PREFIX + value
+
+def loads(value):
+    assert value.startswith(SERIALISED_VALUE_MAGIC), repr(value)
+    version, data = SERIALISED.match(value).groups()
+    return SERIALISER_REGISTRY[version].loads(data)
+
 realpath = zc.buildout.easy_install.realpath
 
 _isurl = re.compile('([a-zA-Z0-9+.-]+)://').match
@@ -259,13 +332,22 @@ def _print_annotate(data, verbose, chosen_sections, basedir):
                 sectionkey = data[section][key]
                 sectionkey.printAll(key, basedir, verbose)
 
+def _remove_ignore_missing(path):
+    try:
+        os.remove(path)
+    except OSError as e:
+        if e.errno != errno.ENOENT:
+            raise
 
 def _unannotate_section(section):
-    return {key: entry.value for key, entry in section.items()}
-
+    for key in section:
+        section[key] = section[key].value
+    return section
 
 def _unannotate(data):
-    return {key: _unannotate_section(section) for key, section in data.items()}
+    for key in data:
+        _unannotate_section(data[key])
+    return data
 
 
 def _format_picked_versions(picked_versions, required_by):
@@ -292,6 +374,7 @@ _buildout_default_options = _annotate_section({
     'develop-eggs-directory': 'develop-eggs',
     'eggs-directory': 'eggs',
     'executable': sys.executable,
+    'extra-paths': 'zc.buildout',
     'find-links': '',
     'install-from-cache': 'false',
     'installed': '.installed.cfg',
@@ -299,6 +382,7 @@ _buildout_default_options = _annotate_section({
     'log-level': 'INFO',
     'newest': 'true',
     'offline': 'false',
+    'dry-run': 'false',
     'parts-directory': 'parts',
     'prefer-final': 'true',
     'python': 'buildout',
@@ -316,11 +400,16 @@ def _get_user_config():
     return os.path.join(buildout_home, 'default.cfg')
 
 
+networkcache_client = None
+
+
 @commands
 class Buildout(DictMixin):
 
     COMMANDS = set()
 
+    installed_part_options = None
+
     def __init__(self, config_file, cloptions,
                  use_user_defaults=True,
                  command=None, args=()):
@@ -355,54 +444,24 @@ class Buildout(DictMixin):
                 data['buildout']['directory'] = SectionKey(
                     os.path.dirname(config_file), 'COMPUTED_VALUE')
 
-        cloptions = dict(
-            (section, dict((option, SectionKey(value, 'COMMAND_LINE_VALUE'))
-                           for (_, option, value) in v))
-            for (section, v) in itertools.groupby(sorted(cloptions),
-                                                  lambda v: v[0])
-            )
-        override = copy.deepcopy(cloptions.get('buildout', {}))
+        result = {}
+        for section, option, value in cloptions:
+          result.setdefault(section, {})[option] = value
+
+        options = result.setdefault('buildout', {})
 
-        # load user defaults, which override defaults
+        extends = []
         user_config = _get_user_config()
         if use_user_defaults and os.path.exists(user_config):
-            download_options = data['buildout']
-            user_defaults, _ = _open(
-                os.path.dirname(user_config),
-                user_config, [], download_options,
-                override, set(), {}
-            )
-            for_download_options = _update(data, user_defaults)
-        else:
-            user_defaults = {}
-            for_download_options = copy.deepcopy(data)
-
-        # load configuration files
+            extends.append(user_config)
         if config_file:
-            download_options = for_download_options['buildout']
-            cfg_data, _ = _open(
-                os.path.dirname(config_file),
-                config_file, [], download_options,
-                override, set(), user_defaults
-            )
-            data = _update(data, cfg_data)
-
-        # extends from command-line
-        if 'buildout' in cloptions:
-            cl_extends = cloptions['buildout'].pop('extends', None)
-            if cl_extends:
-                for extends in cl_extends.value.split():
-                    download_options = for_download_options['buildout']
-                    cfg_data, _ = _open(
-                        os.path.dirname(extends),
-                        os.path.basename(extends),
-                        [], download_options,
-                        override, set(), user_defaults
-                    )
-                    data = _update(data, cfg_data)
+            extends.append(config_file)
+        clextends = options.get('extends')
+        if clextends:
+            extends.append(clextends)
+        options['extends'] = '\n'.join(extends)
 
-        # apply command-line options
-        data = _update(data, cloptions)
+        data = _extends(data, result, os.getcwd(), 'COMMAND_LINE_VALUE')
 
         # Set up versions section, if necessary
         if 'versions' not in data['buildout']:
@@ -418,15 +477,17 @@ class Buildout(DictMixin):
         else:
             versions = {}
         versions.update(
-            dict((k, SectionKey(v, 'DEFAULT_VALUE'))
+            dict((k, SectionKey(v(), 'DEFAULT_VALUE'))
+                 # Use lambdas to compute values only if needed
                  for (k, v) in (
                      # Prevent downgrading due to prefer-final:
                      ('zc.buildout',
-                      '>='+pkg_resources.working_set.find(
+                      lambda: '>='+pkg_resources.working_set.find(
                           pkg_resources.Requirement.parse('zc.buildout')
-                          ).version),
+                          # Skip local part because ">=x.y.z+abc" is invalid
+                          ).parsed_version.public),
                      # Use 2, even though not final
-                     ('zc.recipe.egg', '>=2.0.6'),
+                     ('zc.recipe.egg', lambda: '>=2.0.6'),
                      )
                  if k not in versions
                  ))
@@ -440,6 +501,9 @@ class Buildout(DictMixin):
                 sectionkey = data['buildout'][name]
                 origdir = sectionkey.value
                 src = sectionkey.source
+                if not origdir:
+                    del data['buildout'][name]
+                    continue
                 if '${' in origdir:
                     continue
                 if not os.path.isabs(origdir):
@@ -468,6 +532,9 @@ class Buildout(DictMixin):
         self._raw = _unannotate(data)
         self._data = {}
         self._parts = []
+        self._initializing = []
+        self._signature_cache = {}
+        self._default_requirement = None
 
         # provide some defaults before options are parsed
         # because while parsing options those attributes might be
@@ -502,6 +569,7 @@ class Buildout(DictMixin):
         self.newest = ((not self.offline) and
                        bool_option(buildout_section, 'newest')
                        )
+        self.dry_run = (buildout_section['dry-run'] == 'true')
 
         ##################################################################
         ## WARNING!!!
@@ -533,6 +601,42 @@ class Buildout(DictMixin):
             options['installed'] = os.path.join(options['directory'],
                                                 options['installed'])
 
+        # Extra paths to scan for already installed distributions.
+        extra_paths = options['extra-paths']
+        if extra_paths == 'sys.path':
+            # special case: sys.path
+            extra_paths = sys.path
+            options['extra-paths'] = ' '.join(extra_paths)
+        elif extra_paths == 'legacy':
+            # special case: legacy behavior
+            # this case is why this is done before setting easy_install
+            # versions and other options, to get the legacy behavior.
+            # XXX: These 'sorted' calls correspond to the original behavior,
+            # but they are quite problematic, as other distributions for
+            # zc.buildout, pip, wheel and setuptools may take precedence
+            # over the ones currently running.
+            old_extra_paths = zc.buildout.easy_install.extra_paths(
+              sorted({d.location for d in pkg_resources.working_set}))
+            try:
+                buildout_and_setuptools_dists = list(
+                    zc.buildout.easy_install.install(['zc.buildout'], None,
+                        check_picked=False))
+            finally:
+                zc.buildout.easy_install.extra_paths(old_extra_paths)
+            extra_paths = sorted(
+                {d.location for d in buildout_and_setuptools_dists})
+            options['extra-paths'] = ' '.join(extra_paths)
+        elif extra_paths == 'zc.buildout':
+            # special case: only zc.buildout and its dependencies
+            # but in the order they appear in sys.path, unlike legacy
+            buildout_dists = pkg_resources.require('zc.buildout')
+            buildout_paths = {d.location for d in buildout_dists}
+            extra_paths = [p for p in sys.path if p in buildout_paths]
+            options['extra-paths'] = ' '.join(extra_paths)
+        else:
+            extra_paths = extra_paths.split()
+        zc.buildout.easy_install.extra_paths(extra_paths)
+
         self._setup_logging()
         self._setup_socket_timeout()
 
@@ -598,6 +702,19 @@ class Buildout(DictMixin):
 
         os.chdir(options['directory'])
 
+        networkcache_section_name = options.get('networkcache-section')
+        if networkcache_section_name:
+            networkcache_section = self[networkcache_section_name]
+            try:
+                from slapos.libnetworkcache import NetworkcacheClient
+                global networkcache_client
+                networkcache_client = NetworkcacheClient(networkcache_section)
+            except ImportError:
+                pass
+            except Exception:
+                self._logger.exception(
+                    "Failed to setup Networkcache. Continue without.")
+
     def _buildout_path(self, name):
         if '${' in name:
             return name
@@ -607,44 +724,86 @@ class Buildout(DictMixin):
     def bootstrap(self, args):
         __doing__ = 'Bootstrapping.'
 
-        if os.path.exists(self['buildout']['develop-eggs-directory']):
-            if os.path.isdir(self['buildout']['develop-eggs-directory']):
-                rmtree(self['buildout']['develop-eggs-directory'])
-                self._logger.debug(
-                    "Removed existing develop-eggs directory")
-
         self._setup_directories()
 
-        # Now copy buildout and setuptools eggs, and record destination eggs:
-        entries = []
-        for dist in zc.buildout.easy_install.buildout_and_setuptools_dists:
+        # Hack: propagate libnetworkcache soft dependency
+        specs = ['zc.buildout']
+        try:
+            import slapos.libnetworkcache
+            specs.append('slapos.libnetworkcache')
+        except ImportError:
+            pass
+
+        # Install buildout and dependent eggs following pinned versions.
+        dest = self['buildout']['eggs-directory']
+        path = [self['buildout']['develop-eggs-directory']]
+        if self.offline:
+            # Cannot install: just check requirements are already met
+            path.append(dest)
+            dest = None
+        ws = zc.buildout.easy_install.install(
+                specs,
+                dest,
+                links=self._links,
+                index=self['buildout'].get('index'),
+                path=path,
+                newest=self.newest,
+                allow_hosts=self._allow_hosts,
+                )
+        # If versions aren't pinned or if current modules match,
+        # nothing will be installed, but then we'll copy them to
+        # the local eggs or develop-eggs folder just after this.
+
+        # XXX Note: except if the current modules are not eggs, in which case
+        # we'll create .egg-link to them. This applies to packages installed
+        # in site-packages by pip (.dist-info, not .egg), which in turn would
+        # cause site-packages to be in the sys.path of the generated script.
+
+        # Sort the working set to keep entries with single dists first.
+        options = self['buildout']
+        buildout_dir = options['directory']
+        eggs_dir = options['eggs-directory']
+        develop_eggs_dir = options['develop-eggs-directory']
+        ws = zc.buildout.easy_install.sort_working_set(
+                ws,
+                buildout_dir=buildout_dir,
+                eggs_dir=eggs_dir,
+                develop_eggs_dir=develop_eggs_dir
+                )
+
+        # Now copy buildout and setuptools eggs, and record destination eggs.
+        # XXX Note: dists using .dist-info format - e.g. packages installed by
+        # pip in site-packages - will be seen as develop dists and not copied.
+        egg_entries = []
+        link_dists = []
+        for dist in ws:
             if dist.precedence == pkg_resources.DEVELOP_DIST:
                 dest = os.path.join(self['buildout']['develop-eggs-directory'],
                                     dist.key + '.egg-link')
                 with open(dest, 'w') as fh:
                     fh.write(dist.location)
-                entries.append(dist.location)
+                link_dists.append(dist)
             else:
                 dest = os.path.join(self['buildout']['eggs-directory'],
                                     os.path.basename(dist.location))
-                entries.append(dest)
+                egg_entries.append(dest)
                 if not os.path.exists(dest):
                     if os.path.isdir(dist.location):
                         shutil.copytree(dist.location, dest)
                     else:
                         shutil.copy2(dist.location, dest)
 
-        # Create buildout script
-        ws = pkg_resources.WorkingSet(entries)
+        # Recreate a working set with the potentially-new paths after copying.
+        # We keep the eggs dists first since we know their locations contain a
+        # single dist. We add the other dists manually to avoid activating any
+        # unneded dists at the same location, and we can because these are the
+        # same dists as before as they were not copied.
+        ws = pkg_resources.WorkingSet(egg_entries)
+        for dist in link_dists:
+            ws.add(dist)
         ws.require('zc.buildout')
-        options = self['buildout']
-        eggs_dir = options['eggs-directory']
-        develop_eggs_dir = options['develop-eggs-directory']
-        ws = zc.buildout.easy_install.sort_working_set(
-                ws,
-                eggs_dir=eggs_dir,
-                develop_eggs_dir=develop_eggs_dir
-                )
+
+        # Create buildout script
         zc.buildout.easy_install.scripts(
             ['zc.buildout'], ws, sys.executable,
             options['bin-directory'],
@@ -692,6 +851,19 @@ class Buildout(DictMixin):
 
     @command
     def install(self, install_args):
+        try:
+            self._install_parts(install_args)
+        finally:
+            if self.installed_part_options is not None:
+                try:
+                    self._save_installed_options()
+                finally:
+                    del self.installed_part_options
+        if self.show_picked_versions or self.update_versions_file:
+            self._print_picked_versions()
+        self._unload_extensions()
+
+    def _install_parts(self, install_args):
         __doing__ = 'Installing.'
 
         self._load_extensions()
@@ -705,8 +877,8 @@ class Buildout(DictMixin):
         self._maybe_upgrade()
 
         # load installed data
-        (installed_part_options, installed_exists
-         )= self._read_installed_part_options()
+        installed_part_options = self._read_installed_part_options()
+        installed_parts = installed_part_options['buildout']['parts'].split()
 
         # Remove old develop eggs
         self._uninstall(
@@ -719,21 +891,15 @@ class Buildout(DictMixin):
         installed_part_options['buildout']['installed_develop_eggs'
                                            ] = installed_develop_eggs
 
-        if installed_exists:
-            self._update_installed(
-                installed_develop_eggs=installed_develop_eggs)
-
-        # get configured and installed part lists
-        conf_parts = self['buildout']['parts']
-        conf_parts = conf_parts and conf_parts.split() or []
-        installed_parts = installed_part_options['buildout']['parts']
-        installed_parts = installed_parts and installed_parts.split() or []
+        # From now, the caller will update the .installed.cfg at return.
+        self.installed_part_options = installed_part_options
 
+        install_parts = self['buildout']['parts']
         if install_args:
             install_parts = install_args
             uninstall_missing = False
         else:
-            install_parts = conf_parts
+            install_parts = install_parts.split()
             uninstall_missing = True
 
         # load and initialize recipes
@@ -750,68 +916,79 @@ class Buildout(DictMixin):
                 _save_options(section, self[section], sys.stdout)
             print_()
 
-
-        # compute new part recipe signatures
-        self._compute_part_signatures(install_parts)
+        del self._signature_cache
 
         # uninstall parts that are no-longer used or who's configs
         # have changed
+        if self._logger.getEffectiveLevel() < logging.DEBUG:
+            reinstall_reason_score = -1
+        elif int(os.getenv('BUILDOUT_INFO_REINSTALL_REASON') or 1):
+            # We rely on the fact that installed_parts is sorted according to
+            # dependencies (unless install_args). This is not the case of
+            # installed_parts.
+            reinstall_reason_score = len(installed_parts)
+        else:
+            # Provide a way to disable in tests
+            # or we'd have to update all recipe eggs.
+            reinstall_reason_score = 0
+        reinstall_reason = None
         for part in reversed(installed_parts):
-            if part in install_parts:
+            try:
+                part_index = install_parts.index(part)
+            except ValueError:
+                if not uninstall_missing:
+                    continue
+            else:
                 old_options = installed_part_options[part].copy()
                 installed_files = old_options.pop('__buildout_installed__')
-                new_options = self.get(part)
+                new_options = self.get(part).copy()
                 if old_options == new_options:
                     # The options are the same, but are all of the
                     # installed files still there?  If not, we should
                     # reinstall.
                     if not installed_files:
                         continue
-                    for f in installed_files.split('\n'):
-                        if not os.path.exists(self._buildout_path(f)):
+                    for installed_path in installed_files.split('\n'):
+                        if not os.path.exists(
+                                self._buildout_path(installed_path)):
                             break
                     else:
                         continue
+                else:
+                    installed_path = None
 
-                # output debugging info
-                if self._logger.getEffectiveLevel() < logging.DEBUG:
-                    for k in old_options:
-                        if k not in new_options:
-                            self._logger.debug("Part %s, dropped option %s.",
-                                               part, k)
-                        elif old_options[k] != new_options[k]:
-                            self._logger.debug(
-                                "Part %s, option %s changed:\n%r != %r",
-                                part, k, new_options[k], old_options[k],
-                                )
-                    for k in new_options:
-                        if k not in old_options:
-                            self._logger.debug("Part %s, new option %s.",
-                                               part, k)
-
-            elif not uninstall_missing:
-                continue
+                if part_index < reinstall_reason_score:
+                    reinstall_reason_score = part_index
+                    reinstall_reason = (
+                        part, old_options, new_options, installed_path)
+                elif reinstall_reason_score < 0:
+                    self._log_reinstall_reason(logging.DEBUG,
+                        part, old_options, new_options, installed_path)
 
             self._uninstall_part(part, installed_part_options)
             installed_parts = [p for p in installed_parts if p != part]
-
-            if installed_exists:
-                self._update_installed(parts=' '.join(installed_parts))
+            installed_part_options['buildout']['parts'] = (
+                ' '.join(installed_parts))
+        if reinstall_reason:
+            self._log_reinstall_reason(logging.INFO, *reinstall_reason)
 
         # Check for unused buildout options:
         _check_for_unused_options_in_section(self, 'buildout')
 
+
         # install new parts
+        all_installed_paths = {}
         for part in install_parts:
             signature = self[part].pop('__buildout_signature__')
             saved_options = self[part].copy()
             recipe = self[part].recipe
             if part in installed_parts: # update
-                need_to_save_installed = False
                 __doing__ = 'Updating %s.', part
                 self._logger.info(*__doing__)
+                if self.dry_run:
+                    continue
                 old_options = installed_part_options[part]
-                old_installed_files = old_options['__buildout_installed__']
+                installed_files = old_options['__buildout_installed__']
 
                 try:
                     update = recipe.update
@@ -823,88 +1000,84 @@ class Buildout(DictMixin):
                         part)
 
                 try:
-                    installed_files = self[part]._call(update)
-                except:
+                    updated_files = self[part]._call(update)
+                except Exception:
                     installed_parts.remove(part)
-                    self._uninstall(old_installed_files)
-                    if installed_exists:
-                        self._update_installed(
-                            parts=' '.join(installed_parts))
+                    self._uninstall(installed_files)
+                    installed_part_options['buildout']['parts'] = (
+                        ' '.join(installed_parts))
                     raise
 
-                old_installed_files = old_installed_files.split('\n')
-                if installed_files is None:
-                    installed_files = old_installed_files
-                else:
-                    if isinstance(installed_files, str):
-                        installed_files = [installed_files]
-                    else:
-                        installed_files = list(installed_files)
-
-                    need_to_save_installed = [
-                        p for p in installed_files
-                        if p not in old_installed_files]
-
-                    if need_to_save_installed:
-                        installed_files = (old_installed_files
-                                           + need_to_save_installed)
+                installed_files = set(installed_files.split('\n')) \
+                    if installed_files else set()
+                if updated_files:
+                    (installed_files.add if isinstance(updated_files, str) else
+                     installed_files.update)(updated_files)
 
             else: # install
-                need_to_save_installed = True
                 __doing__ = 'Installing %s.', part
                 self._logger.info(*__doing__)
+                if self.dry_run:
+                    continue
                 installed_files = self[part]._call(recipe.install)
                 if installed_files is None:
                     self._logger.warning(
                         "The %s install returned None.  A path or "
                         "iterable os paths should be returned.",
                         part)
-                    installed_files = ()
-                elif isinstance(installed_files, str):
-                    installed_files = [installed_files]
-                else:
-                    installed_files = list(installed_files)
+                elif installed_files:
+                    installed_files = ({installed_files}
+                        if isinstance(installed_files, str) else
+                        set(installed_files))
+
+            if installed_files:
+                conflicts = installed_files.intersection(
+                    all_installed_paths)
+                if conflicts:
+                    self._error(
+                        "The following paths are already"
+                        " installed by other sections: %r",
+                        {x: all_installed_paths[x] for x in conflicts})
+                all_installed_paths.update(dict.fromkeys(installed_files, part))
+                installed_files = '\n'.join(sorted(installed_files))
+            else:
+                installed_files = ''
 
-            installed_part_options[part] = saved_options
-            saved_options['__buildout_installed__'
-                          ] = '\n'.join(installed_files)
+            saved_options['__buildout_installed__'] = installed_files
             saved_options['__buildout_signature__'] = signature
+            installed_part_options[part] = saved_options
 
-            installed_parts = [p for p in installed_parts if p != part]
-            installed_parts.append(part)
-            _check_for_unused_options_in_section(self, part)
-
-            if need_to_save_installed:
+            if part not in installed_parts:
+                installed_parts.append(part)
                 installed_part_options['buildout']['parts'] = (
                     ' '.join(installed_parts))
-                self._save_installed_options(installed_part_options)
-                installed_exists = True
-            else:
-                assert installed_exists
-                self._update_installed(parts=' '.join(installed_parts))
-
-        if installed_develop_eggs:
-            if not installed_exists:
-                self._save_installed_options(installed_part_options)
-        elif (not installed_parts) and installed_exists:
-            os.remove(self['buildout']['installed'])
+                _check_for_unused_options_in_section(self, part)
 
-        if self.show_picked_versions or self.update_versions_file:
-            self._print_picked_versions()
-        self._unload_extensions()
+            if self._log_level < logging.INFO:
+                self._save_installed_options()
 
-    def _update_installed(self, **buildout_options):
-        installed = self['buildout']['installed']
-        f = open(installed, 'a')
-        f.write('\n[buildout]\n')
-        for option, value in list(buildout_options.items()):
-            _save_option(option, value, f)
-        f.close()
+    def _log_reinstall_reason(self, level, part,
+                              old_options, new_options, missing):
+        log = self._logger.log
+        if missing:
+            log(level, "Part %s, missing path: %s", part, missing)
+            return
+        for k in old_options:
+            if k not in new_options:
+                log(level, "Part %s, dropped option %s.", part, k)
+            elif old_options[k] != new_options[k]:
+                log(level, "Part %s, option %s changed: %r != %r",
+                           part, k, new_options[k], old_options[k])
+        for k in new_options:
+            if k not in old_options:
+                log(level, "Part %s, new option %s.", part, k)
 
     def _uninstall_part(self, part, installed_part_options):
         # uninstall part
         __doing__ = 'Uninstalling %s.', part
         self._logger.info(*__doing__)
+        if self.dry_run:
+            return
 
         # run uninstall recipe
         recipe, entry = _recipe(installed_part_options[part])
@@ -990,17 +1163,6 @@ class Buildout(DictMixin):
                 self._logger.warning(
                     "Unexpected entry, %r, in develop-eggs directory.", f)
 
-    def _compute_part_signatures(self, parts):
-        # Compute recipe signature and add to options
-        for part in parts:
-            options = self.get(part)
-            if options is None:
-                options = self[part] = {}
-            recipe, entry = _recipe(options)
-            req = pkg_resources.Requirement.parse(recipe)
-            sig = _dists_sig(pkg_resources.working_set.resolve([req]))
-            options['__buildout_signature__'] = ' '.join(sig)
-
     def _read_installed_part_options(self):
         old = self['buildout']['installed']
         if old and os.path.isfile(old):
@@ -1016,11 +1178,9 @@ class Buildout(DictMixin):
                         options[option] = value
                 result[section] = self.Options(self, section, options)
 
-            return result, True
+            return result
         else:
-            return ({'buildout': self.Options(self, 'buildout', {'parts': ''})},
-                    False,
-                    )
+            return {'buildout': self.Options(self, 'buildout', {'parts': ''})}
 
     def _uninstall(self, installed):
         for f in installed.split('\n'):
@@ -1061,16 +1221,41 @@ class Buildout(DictMixin):
         return ' '.join(installed)
 
 
-    def _save_installed_options(self, installed_options):
-        installed = self['buildout']['installed']
-        if not installed:
+    def _save_installed_options(self):
+        if self.dry_run:
             return
-        f = open(installed, 'w')
-        _save_options('buildout', installed_options['buildout'], f)
-        for part in installed_options['buildout']['parts'].split():
-            print_(file=f)
-            _save_options(part, installed_options[part], f)
-        f.close()
+        installed_path = self['buildout']['installed']
+        if not installed_path:
+            return
+        installed_part_options = self.installed_part_options
+        buildout = installed_part_options['buildout']
+        installed_parts = buildout['parts']
+        if installed_parts or buildout['installed_develop_eggs']:
+            new = StringIO()
+            _save_options('buildout', buildout, new)
+            for part in installed_parts.split():
+                new.write('\n')
+                _save_options(part, installed_part_options[part], new)
+            new = new.getvalue()
+            try:
+                with open(installed_path) as f:
+                    save = f.read(1+len(new)) != new
+            except IOError as e:
+                if e.errno != errno.ENOENT:
+                    raise
+                save = True
+            if save:
+                installed_tmp = installed_path + ".tmp"
+                try:
+                    with open(installed_tmp, "w") as f:
+                        f.write(new)
+                        f.flush()
+                        os.fsync(f.fileno())
+                    os.rename(installed_tmp, installed_path)
+                finally:
+                    _remove_ignore_missing(installed_tmp)
+        else:
+            _remove_ignore_missing(installed_path)
 
     def _error(self, message, *args):
         raise zc.buildout.UserError(message % args)
@@ -1135,8 +1320,17 @@ class Buildout(DictMixin):
         if not self.newest:
             return
 
+        # Hack: propagate libnetworkcache soft dependency
+        # XXX just zc.buildout should suffice, then iter over projects in ws
+        specs = ['zc.buildout', 'setuptools', 'pip', 'wheel']
+        try:
+            import slapos.libnetworkcache
+            specs.append('slapos.libnetworkcache')
+        except ImportError:
+            pass
+
         ws = zc.buildout.easy_install.install(
-            ('zc.buildout', 'setuptools', 'pip', 'wheel'),
+            specs,
             self['buildout']['eggs-directory'],
             links = self['buildout'].get('find-links', '').split(),
             index = self['buildout'].get('index'),
@@ -1146,7 +1340,7 @@ class Buildout(DictMixin):
 
         upgraded = []
 
-        for project in 'zc.buildout', 'setuptools', 'pip', 'wheel':
+        for project in specs:
             req = pkg_resources.Requirement.parse(project)
             dist = ws.find(req)
             importlib.import_module(project)
@@ -1184,10 +1378,12 @@ class Buildout(DictMixin):
         # the new dist is different, so we've upgraded.
         # Update the scripts and return True
         options = self['buildout']
+        buildout_dir = options['directory']
         eggs_dir = options['eggs-directory']
         develop_eggs_dir = options['develop-eggs-directory']
         ws = zc.buildout.easy_install.sort_working_set(
                 ws,
+                buildout_dir=buildout_dir,
                 eggs_dir=eggs_dir,
                 develop_eggs_dir=develop_eggs_dir
                 )
@@ -1297,6 +1493,7 @@ class Buildout(DictMixin):
             os.write(fd, (zc.buildout.easy_install.runsetup_template % dict(
                 setupdir=os.path.dirname(setup),
                 setup=setup,
+                path_list=[],
                 __file__ = setup,
                 )).encode())
             args = [sys.executable, tsetup] + args
@@ -1356,21 +1553,46 @@ class Buildout(DictMixin):
                     v = v.replace(os.getcwd(), base_path)
                 print_("%s =%s" % (k, v))
 
-    def __getitem__(self, section):
-        __doing__ = 'Getting section %s.', section
+    def initialize(self, options, reqs, entry):
+        recipe_class = _install_and_load(reqs, 'zc.buildout', entry, self)
         try:
-            return self._data[section]
+            sig = self._signature_cache[reqs]
         except KeyError:
-            pass
+            req = pkg_resources.Requirement.parse(reqs)
+            sig = self._signature_cache[reqs] = sorted(set(
+                _dists_sig(pkg_resources.working_set.resolve([req]))))
+        self._initializing.append((options, sig))
+        try:
+            recipe = recipe_class(self, options.name, options)
+            options['__buildout_signature__']
+        finally:
+            del self._initializing[-1]
+        return recipe
 
+    def __getitem__(self, section):
+        __doing__ = 'Getting section %s.', section
         try:
-            data = self._raw[section]
+            options = self._data[section]
         except KeyError:
-            raise MissingSection(section)
-
-        options = self.Options(self, section, data)
-        self._data[section] = options
-        options._initialize()
+            try:
+                data = self._raw[section]
+            except KeyError:
+                raise MissingSection(section)
+            e = data.get('__unsupported_conditional_expression__')
+            if e:
+                raise e
+            options = self.Options(self, section, data)
+            self._data[section] = options
+            options._initialize()
+
+        if self._initializing:
+            caller = self._initializing[-1][0]
+            if 'buildout' != section and not (
+                  section in caller.depends or
+                  # Do not only check the caller,
+                  # because of circular dependencies during substitutions.
+                  section in (x[0].name for x in self._initializing)):
+                caller.depends.add(section)
         return options
 
     def __setitem__(self, name, data):
@@ -1380,10 +1602,6 @@ class Buildout(DictMixin):
         self[name] # Add to parts
 
     def parse(self, data):
-        try:
-            from cStringIO import StringIO
-        except ImportError:
-            from io import StringIO
         import textwrap
 
         sections = zc.buildout.configparser.parse(
@@ -1409,9 +1627,16 @@ class Buildout(DictMixin):
     def __len__(self):
         return len(self._raw)
 
-
+_install_and_load_cache = {}
 def _install_and_load(spec, group, entry, buildout):
     __doing__ = 'Loading recipe %r.', spec
+
+    key = spec, group, entry
+    try:
+        return _install_and_load_cache[key]
+    except KeyError:
+        pass
+
     try:
         req = pkg_resources.Requirement.parse(spec)
 
@@ -1438,8 +1663,9 @@ def _install_and_load(spec, group, entry, buildout):
                 )
 
         __doing__ = 'Loading %s recipe entry %s:%s.', group, spec, entry
-        return pkg_resources.load_entry_point(
+        result = _install_and_load_cache[key] = pkg_resources.load_entry_point(
             req.project_name, group, entry)
+        return result
 
     except Exception:
         v = sys.exc_info()[1]
@@ -1457,6 +1683,7 @@ class Options(DictMixin):
         self._raw = data
         self._cooked = {}
         self._data = {}
+        self.depends = set()
 
     def _initialize(self):
         name = self.name
@@ -1465,6 +1692,8 @@ class Options(DictMixin):
         if '<' in self._raw:
             self._raw = self._do_extend_raw(name, self._raw, [])
 
+        default = self.buildout._default_requirement
+
         # force substitutions
         for k, v in sorted(self._raw.items()):
             if '${' in v:
@@ -1478,16 +1707,24 @@ class Options(DictMixin):
             self.buildout[dname]
 
         if self.get('recipe'):
-            self.initialize()
+            if default:
+                self.depends.add(default)
+            self.recipe = self.buildout.initialize(self, *_recipe(self._data))
             self.buildout._parts.append(name)
 
-    def initialize(self):
-        reqs, entry = _recipe(self._data)
-        buildout = self.buildout
-        recipe_class = _install_and_load(reqs, 'zc.buildout', entry, buildout)
-
-        name = self.name
-        self.recipe = recipe_class(buildout, name, self)
+        m = md5()
+        # _profile_base_location_ is ignored in signatures, so that two sections
+        # at different URLs can have same signature
+        _profile_base_location_ = self.get('_profile_base_location_')
+        # access values through .get() instead of .items() to detect unused keys
+        for key in sorted(self.keys()):
+            if key == '_profile_base_location_':
+                continue
+            value = self._data.get(key, self._cooked.get(key, self._raw.get(key)))
+            if _profile_base_location_:
+                value = value.replace(_profile_base_location_, '${:_profile_base_location_}')
+            m.update(('%r\0%r\0' % (key, value)).encode())
+        self.items_signature = '%s:%s' % (name, m.hexdigest())
 
     def _do_extend_raw(self, name, data, doing):
         if name == 'buildout':
@@ -1511,10 +1748,10 @@ class Options(DictMixin):
                     raise zc.buildout.UserError("No section named %r" % iname)
                 result.update(self._do_extend_raw(iname, raw, doing))
 
-            result = _annotate_section(result, "")
+            _annotate_section(result, "")
             data = _annotate_section(copy.deepcopy(data), "")
-            result = _update_section(result, data)
-            result = _unannotate_section(result)
+            _update_section(result, data)
+            _unannotate_section(result)
             result.pop('<', None)
             return result
         finally:
@@ -1523,12 +1760,26 @@ class Options(DictMixin):
     def _dosub(self, option, v):
         __doing__ = 'Getting option %s:%s.', self.name, option
         seen = [(self.name, option)]
-        v = '$$'.join([self._sub(s, seen) for s in v.split('$$')])
+        v = '$$'.join([self._sub(s, seen, last=False)
+                       for s in v.split('$$')])
         self._cooked[option] = v
 
-    def get(self, option, default=None, seen=None):
+    def get(self, *args, **kw):
+      v = self._get(*args, **kw)
+      if hasattr(v, 'startswith') and v.startswith(SERIALISED_VALUE_MAGIC):
+        v = loads(v)
+      return v
+
+    def _get(self, option, default=None, seen=None, last=True):
+        # TODO: raise instead of handling a default parameter,
+        #       so that get() never tries to deserialize a default value
+        #       (and then: move deserialization to __getitem__
+        #                  and make get() use __getitem__)
         try:
-            return self._data[option]
+            if last:
+                return self._data[option].replace('$${', '${')
+            else:
+                return self._data[option]
         except KeyError:
             pass
 
@@ -1536,6 +1787,16 @@ class Options(DictMixin):
         if v is None:
             v = self._raw.get(option)
             if v is None:
+                if option == '__buildout_signature__':
+                    buildout = self.buildout
+                    options, sig = buildout._initializing[-1]
+                    if options is self:
+                        self.depends = frozenset(self.depends)
+                        v = self._data[option] = ' '.join(sig + [
+                            buildout[dependency].items_signature
+                            for dependency in sorted(self.depends)])
+                        return v
+                    raise zc.buildout.UserError("premature access to " + option)
                 return default
 
         __doing__ = 'Getting option %s:%s.', self.name, option
@@ -1550,16 +1811,20 @@ class Options(DictMixin):
                     )
             else:
                 seen.append(key)
-            v = '$$'.join([self._sub(s, seen) for s in v.split('$$')])
+            v = '$$'.join([self._sub(s, seen, last=False)
+                           for s in v.split('$$')])
             seen.pop()
 
         self._data[option] = v
-        return v
+        if last:
+            return v.replace('$${', '${')
+        else:
+            return v
 
     _template_split = re.compile('([$]{[^}]*})').split
     _simple = re.compile('[-a-zA-Z0-9 ._]+$').match
     _valid = re.compile(r'\${[-a-zA-Z0-9 ._]*:[-a-zA-Z0-9 ._]+}$').match
-    def _sub(self, template, seen):
+    def _sub(self, template, seen, last=True):
         value = self._template_split(template)
         subs = []
         for ref in value[1::2]:
@@ -1587,7 +1852,14 @@ class Options(DictMixin):
             section, option = s
             if not section:
                 section = self.name
-            v = self.buildout[section].get(option, None, seen)
+                options = self
+            else:
+                self.buildout._initializing.append((self,))
+                try:
+                    options = self.buildout[section]
+                finally:
+                    del self.buildout._initializing[-1]
+            v = options._get(option, None, seen, last=last)
             if v is None:
                 if option == '_buildout_section_name_':
                     v = self.name
@@ -1600,20 +1872,17 @@ class Options(DictMixin):
         return ''.join([''.join(v) for v in zip(value[::2], subs)])
 
     def __getitem__(self, key):
-        try:
-            return self._data[key]
-        except KeyError:
-            pass
-
-        v = self.get(key)
-        if v is None:
+        v = self.get(key, _MARKER)
+        if v is _MARKER:
             raise MissingOption("Missing option: %s:%s" % (self.name, key))
         return v
 
     def __setitem__(self, option, value):
+        if not re.match(zc.buildout.configparser.option_name_re + '$', option):
+            raise zc.buildout.UserError("Invalid option name %r" % (option, ))
         if not isinstance(value, str):
-            raise TypeError('Option values must be strings', value)
-        self._data[option] = value
+            value = dumps(value)
+        self._data[option] = value.replace('${', '$${')
 
     def __delitem__(self, key):
         if key in self._raw:
@@ -1641,6 +1910,9 @@ class Options(DictMixin):
         result = copy.deepcopy(self._raw)
         result.update(self._cooked)
         result.update(self._data)
+        for key, value in result.items():
+            if value.startswith(SERIALISED_VALUE_MAGIC):
+                result[key] = loads(value)
         return result
 
     def _call(self, f):
@@ -1672,9 +1944,28 @@ class Options(DictMixin):
                 self.name)
         return self._created
 
+    def barrier(self):
+        """Set self as a default requirement for not-yet processed parts
+
+        This method must be called if this part may alter the processing
+        of other parts in any way, like modifying environment variables.
+        In other words, it sets an implicit dependency for these parts.
+        """
+        buildout = self.buildout
+        if not buildout._initializing:
+            raise zc.buildout.UserError(
+                "Options.barrier() shall only be used during initialization")
+        buildout._default_requirement = self.name
+
     def __repr__(self):
         return repr(dict(self))
 
+    def __eq__(self, other):
+        try:
+            return sorted(self.items()) == sorted(other.items())
+        except Exception:
+            return super(Options, self).__eq__(other)
+
 Buildout.Options = Options
 
 _spacey_nl = re.compile('[ \t\r\f\v]*\n[ \t\r\f\v\n]*'
@@ -1707,6 +1998,8 @@ def _quote_spacey_nl(match):
     return result
 
 def _save_option(option, value, f):
+    if not isinstance(value, str):
+        value = dumps(value)
     value = _spacey_nl.sub(_quote_spacey_nl, value)
     if value.startswith('\n\t'):
         value = '%(__buildout_space_n__)s' + value[2:]
@@ -1716,10 +2009,12 @@ def _save_option(option, value, f):
 
 def _save_options(section, options, f):
     print_('[%s]' % section, file=f)
-    items = list(options.items())
-    items.sort()
-    for option, value in items:
-        _save_option(option, value, f)
+    try:
+        get_option = partial(options._get, last=False)
+    except AttributeError:
+        get_option = options.get
+    for option in sorted(options):
+        _save_option(option, get_option(option), f)
 
 def _default_globals():
     """Return a mapping of default and precomputed expressions.
@@ -1801,103 +2096,172 @@ def _default_globals():
 
     return globals_defs
 
-variable_template_split = re.compile('([$]{[^}]*})').split
 
-def _open(
-        base, filename, seen, download_options,
-        override, downloaded, user_defaults
-        ):
-    """Open a configuration file and return the result as a dictionary,
+class _default_globals(dict):
+    """
+    Make sure parser context is computed at most once,
+    even if several files are parsed.
+    And compute some values only if accessed.
 
-    Recursively open other files based on buildout options found.
+    If __getitem__ raises, _doing() calls .get('__doing__'),
+    but that's not the only reason to subclass dict:
+    CPython requests it (for performance reasons?). PyPy does not care.
     """
-    download_options = _update_section(download_options, override)
-    raw_download_options = _unannotate_section(download_options)
-    newest = bool_option(raw_download_options, 'newest', 'false')
-    fallback = newest and not (filename in downloaded)
-    extends_cache = raw_download_options.get('extends-cache')
-    if extends_cache and variable_template_split(extends_cache)[1::2]:
-        raise ValueError(
-            "extends-cache '%s' may not contain ${section:variable} to expand."
-            % extends_cache
-        )
-    download = zc.buildout.download.Download(
-        raw_download_options, cache=extends_cache,
-        fallback=fallback, hash_name=True)
-    is_temp = False
-    downloaded_filename = None
-    if _isurl(filename):
-        downloaded_filename, is_temp = download(filename)
-        fp = open(downloaded_filename)
-        base = filename[:filename.rfind('/')]
-    elif _isurl(base):
-        if os.path.isabs(filename):
-            fp = open(filename)
-            base = os.path.dirname(filename)
-        else:
-            filename = base + '/' + filename
-            downloaded_filename, is_temp = download(filename)
-            fp = open(downloaded_filename)
-            base = filename[:filename.rfind('/')]
-    else:
-        filename = os.path.join(base, filename)
-        fp = open(filename)
-        base = os.path.dirname(filename)
-    downloaded.add(filename)
+    # XXX: The following line is only to keep access to the overridden global.
+    #      If pushed upstream, proper naming would avoid such hack.
+    #      Meanwhile, the patch consists only in this drop-in class
+    #      and that's easier to maintain.
+    _default_globals = staticmethod(_default_globals)
 
-    if filename in seen:
-        if is_temp:
-            fp.close()
-            os.remove(downloaded_filename)
-        raise zc.buildout.UserError("Recursive file include", seen, filename)
-
-    root_config_file = not seen
-    seen.append(filename)
-
-    filename_for_logging = filename
-    if downloaded_filename:
-        filename_for_logging = '%s (downloaded as %s)' % (
-            filename, downloaded_filename)
-    result = zc.buildout.configparser.parse(
-        fp, filename_for_logging, _default_globals)
-
-    fp.close()
-    if is_temp:
-        os.remove(downloaded_filename)
-
-    options = result.get('buildout', {})
-    extends = options.pop('extends', None)
-    if 'extended-by' in options:
-        raise zc.buildout.UserError(
-            'No-longer supported "extended-by" option found in %s.' %
-            filename)
+    def __getitem__(self, key):
+        cls = self.__class__
+        try:
+            context = self.context
+        except AttributeError:
+            context = self.context = cls._default_globals()
+            context['sys'] = _sysproxy(self)
+        try:
+            return context[key]
+        except KeyError as e:
+            try:
+                value = getattr(self, key)
+            except AttributeError:
+                pass
+            else:
+                value = context[key] = value()
+                return value
+            raise e # BBB: On Python 3, a bare 'raise' is enough.
 
-    result = _annotate(result, filename)
+    def multiarch(self):
+        args = os.getenv('CC') or 'gcc', '-dumpmachine'
+        self['__doing__'] = '%r', args
+        m = subprocess.check_output(args, universal_newlines=True).rstrip()
+        del self['__doing__']
+        return m
 
-    if root_config_file and 'buildout' in result:
-        download_options = _update_section(
-            download_options, result['buildout']
-        )
+class _sysproxy(object): # BBB: alternate/temporary way to get multiarch value
 
-    if extends:
-        extends = extends.split()
-        eresult, user_defaults = _open(
-            base, extends.pop(0), seen, download_options, override,
-            downloaded, user_defaults
-        )
-        for fname in extends:
-            next_extend, user_defaults = _open(
-                base, fname, seen, download_options, override,
-                downloaded, user_defaults
-            )
-            eresult = _update(eresult, next_extend)
-        result = _update(eresult, result)
-    else:
-        if user_defaults:
-            result = _update(user_defaults, result)
-            user_defaults = {}
-    seen.pop()
-    return result, user_defaults
+    def __init__(self, default_globals):
+        self.__default_globals = default_globals
+
+    def __getattr__(self, name):
+        if name == '_multiarch':
+            default_globals = self.__default_globals
+            setattr(sys, name, getattr(default_globals, name[1:])())
+            default_globals.context['sys'] = sys
+        return getattr(sys, name)
+
+
+variable_template_split = re.compile('([$]{[^}]*})').split
+
+
+class _extends(object):
+
+    def __new__(cls, defaults, *args):
+        self = super(_extends, cls).__new__(cls)
+        self.seen = set()
+        self.processing = []
+        self.extends = [defaults]
+        self._download_options = []
+        self.collect(*args)
+        return self.merge()
+
+    def merge(self):
+        result = {}
+        for d in self.extends:
+          _update(result, d)
+        return result
+
+    def __getattr__(self, attr):
+        if attr == 'download_options':
+            # Compute processed options
+            result_so_far = self.merge()
+            self.extends[:] = [result_so_far]
+            value = copy.deepcopy(result_so_far.get('buildout')) or {}
+            # Update with currently-being-processed options
+            for options in reversed(self._download_options):
+                _update_section(value, options)
+            value = _unannotate_section(value)
+            setattr(self, attr, value)
+            return value
+        return self.__getattribute__(attr)
+
+    def collect(self, result, base, filename):
+        options = result.get('buildout', {})
+        extends = options.pop('extends', '')
+
+        # Sanitize buildout options
+        if 'extended-by' in options:
+            raise zc.buildout.UserError(
+                'No-longer supported "extended-by" option found in %s.' %
+                filename)
+
+        # Find and expose _profile_base_location_
+        for section in result.values():
+            for value in section.values():
+                if '${:_profile_base_location_}' in value:
+                    section['_profile_base_location_'] = base
+                    break
+
+        _annotate(result, filename)
+
+        # Collect extends and unprocessed download options
+        self.processing.append(filename)
+        self._download_options.append(options)
+        for fextends in extends.split():
+            self.open(base, fextends)
+        self.extends.append(result)
+        del self.processing[-1], self._download_options[-1]
+
+    def open(self, base, filename):
+        # Determine file location
+        if _isurl(filename):
+            download = True
+        elif _isurl(base):
+            download = True
+            filename = urljoin(base + '/', filename)
+        else:
+            download = False
+            filename = os.path.realpath(
+                os.path.join(base, os.path.expanduser(filename)))
+
+        # Detect repetitions and loops
+        if filename in self.seen:
+            if filename in self.processing:
+                raise zc.buildout.UserError("circular extends: %s" % filename)
+            return
+        self.seen.add(filename)
+
+        # Fetch file
+        is_temp = False
+        try:
+            if download:
+                download_options = self.download_options
+                extends_cache = download_options.get('extends-cache')
+                if extends_cache and variable_template_split(extends_cache)[1::2]:
+                    raise ValueError(
+                        "extends-cache '%s' may not contain ${section:variable} to expand."
+                        % extends_cache
+                    )
+                downloaded_filename, is_temp = zc.buildout.download.Download(
+                    download_options, cache=extends_cache,
+                    fallback=bool_option(download_options, 'newest'),
+                    hash_name=True)(filename)
+                filename_for_logging = '%s (downloaded as %s)' % (
+                    filename, downloaded_filename)
+                base = filename[:filename.rfind('/')]
+            else:
+                downloaded_filename = filename_for_logging = filename
+                base = os.path.dirname(filename)
+
+            with open(downloaded_filename) as fp:
+                result = zc.buildout.configparser.parse(
+                    fp, filename_for_logging, _default_globals)
+        finally:
+            if is_temp:
+                os.remove(downloaded_filename)
+
+        return self.collect(result, base, filename)
 
 
 ignore_directories = '.svn', 'CVS', '__pycache__', '.git'
@@ -1946,58 +2310,57 @@ def _dists_sig(dists):
             continue
         seen.add(dist)
         location = dist.location
-        if dist.precedence == pkg_resources.DEVELOP_DIST:
+        if (dist.precedence == pkg_resources.DEVELOP_DIST
+            and location != zc.buildout.easy_install.python_lib
+            and not isinstance(dist, pkg_resources.DistInfoDistribution)):
             result.append(dist.project_name + '-' + _dir_hash(location))
         else:
-            result.append(os.path.basename(location))
+            result.append(dist.project_name + '-' + dist.version)
     return result
 
-def _update_section(in1, s2):
-    s1 = copy.deepcopy(in1)
-    # Base section 2 on section 1; section 1 is copied, with key-value pairs
-    # in section 2 overriding those in section 1. If there are += or -=
-    # operators in section 2, process these to add or subtract items (delimited
-    # by newlines) from the preexisting values.
-    s2 = copy.deepcopy(s2) # avoid mutating the second argument, which is unexpected
-    # Sort on key, then on the addition or subtraction operator (+ comes first)
-    for k, v in sorted(s2.items(), key=lambda x: (x[0].rstrip(' +'), x[0][-1])):
+def _update_section(s1, s2):
+    # Base section 2 on section 1; key-value pairs in s2 override those in s1.
+    # If there are += or -= operators in s2, process these to add or subtract
+    # items (delimited by newlines) from the preexisting values.
+    # Sort on key, then on + and - operators, so that KEY < KEY + < KEY -, to
+    # process them in this order if several are defined in the same section.
+    # Section s1 is modified in place.
+    keysort = lambda x: (x[0].rstrip(' +'), x[0].endswith('+'))
+    for k, v in sorted(s2.items(), key=keysort):
         if k.endswith('+'):
             key = k.rstrip(' +')
-            implicit_value = SectionKey("", "IMPLICIT_VALUE")
-            # Find v1 in s2 first; it may have been defined locally too.
-            section_key = s2.get(key, s1.get(key, implicit_value))
-            section_key = copy.deepcopy(section_key)
-            section_key.addToValue(v.value, v.source)
-            s2[key] = section_key
-            del s2[k]
+            value = s1.get(key, SectionKey("", "IMPLICIT_VALUE"))
+            value.addToValue(v.value, v.source)
+            s1[key] = value
         elif k.endswith('-'):
             key = k.rstrip(' -')
-            implicit_value = SectionKey("", "IMPLICIT_VALUE")
-            # Find v1 in s2 first; it may have been set by a += operation first
-            section_key = s2.get(key, s1.get(key, implicit_value))
-            section_key = copy.deepcopy(section_key)
-            section_key.removeFromValue(v.value, v.source)
-            s2[key] = section_key
-            del s2[k]
-
-    _update_verbose(s1, s2)
-    return s1
-
-def _update_verbose(s1, s2):
-    for key, v2 in s2.items():
-        if key in s1:
-            v1 = s1[key]
-            v1.overrideValue(v2)
+            value = s1.get(key, SectionKey("", "IMPLICIT_VALUE"))
+            value.removeFromValue(v.value, v.source)
+            s1[key] = value
         else:
-            s1[key] = copy.deepcopy(v2)
+            if k in s1:
+                v1 = s1[k]
+                v1.overrideValue(v)
+            else:
+                s1[k] = v
+    return s1
 
-def _update(in1, d2):
-    d1 = copy.deepcopy(in1)
+def _update(d1, d2):
     for section in d2:
         if section in d1:
-            d1[section] = _update_section(d1[section], d2[section])
+            _update_section(d1[section], d2[section])
         else:
-            d1[section] = copy.deepcopy(d2[section])
+            # XXX: In order to process += (and -=) correctly when
+            # <key> = <value> and <key> += <value> are in the same section
+            # _update_section should be called even when section is not in d1
+            # Hack: When <= is used in the section, _update_section will be
+            # called later anyway, so we can avoid calling it now which will
+            # enable brittle and partial support for += (or -=) with keys that
+            # come from the <= sections.
+            # TODO: Either implement += and -= support with <= fully or call
+            # _update_section systematically and give up <= compatibility.
+            s2 = d2[section]
+            d1[section] = s2 if '<' in s2 else _update_section({}, s2)
     return d1
 
 def _recipe(options):
@@ -2095,6 +2458,12 @@ Options:
 
     Print buildout version number and exit.
 
+  --dry-run
+
+    Dry-run mode.  With this setting, buildout will display what will
+    be uninstalled and what will be installed without doing anything
+    in reality.
+
 Assignments are of the form: section:option=value and are used to
 provide configuration options that override those given in the
 configuration file.  For example, to run the buildout in offline mode,
@@ -2214,13 +2583,16 @@ def main(args=None):
                         _error("No timeout value specified for option", orig_op)
                     except ValueError:
                         _error("Timeout value must be numeric", orig_op)
+
+            elif orig_op == '--dry-run':
+                    options.append(('buildout', 'dry-run', 'true'))
             elif op:
                 if orig_op == '--help':
                     _help()
                 elif orig_op == '--version':
                     _version()
                 else:
-                    _error("Invalid option", '-'+op[0])
+                    _error("Invalid option", orig_op)
         elif '=' in args[0]:
             option, value = args.pop(0).split('=', 1)
             option = option.split(':')

src/zc/buildout/configparser.py

@@ -113,10 +113,12 @@ section_header  = re.compile(
     r'([#;].*)?$)'
     ).match
 
+option_name_re = r'[^\s{}[\]=:]+'
 option_start = re.compile(
-    r'(?P<name>[^\s{}[\]=:]+\s*[-+]?)'
+    r'(?P<name>%s\s*[-+]?)'
     r'='
-    r'(?P<value>.*)$').match
+    r'(?P<value>.*)$'
+    % option_name_re).match
 
 leading_blank_lines = re.compile(r"^(\s*\n)+")
 
@@ -201,7 +203,12 @@ def parse(fp, fpname, exp_globals=dict):
                         if not context:
                             context = exp_globals()
                         # evaluated expression is in list: get first element
-                        section_condition = eval(expr, context)[0]
+                        try:
+                            section_condition = eval(expr, context)[0]
+                        except NameError as x:
+                            sections.setdefault(sectname, {})[
+                                '__unsupported_conditional_expression__'] = x
+                            continue
                     # finally, ignore section when an expression
                     # evaluates to false
                     if not section_condition:
@@ -255,6 +262,8 @@ def parse(fp, fpname, exp_globals=dict):
         section = sections[sectname]
         for name in section:
             value = section[name]
+            if isinstance(value, NameError):
+                continue
             if value[:1].isspace():
                 section[name] = leading_blank_lines.sub(
                     '', textwrap.dedent(value.rstrip()))

src/zc/buildout/download.py

@@ -20,44 +20,47 @@ except ImportError:
 
 try:
     # Python 3
-    from urllib.request import urlretrieve
-    from urllib.parse import urlparse
+    from urllib.error import HTTPError
+    from urllib.request import Request, urlopen
+    from urllib.parse import urlparse, urlunparse
 except ImportError:
     # Python 2
-    import base64
     from urlparse import urlparse
     from urlparse import urlunparse
-    import urllib2
-
-    def urlretrieve(url, tmp_path):
-        """Work around Python issue 24599 including basic auth support
-        """
-        scheme, netloc, path, params, query, frag = urlparse(url)
-        auth, host = urllib2.splituser(netloc)
-        if auth:
-            url = urlunparse((scheme, host, path, params, query, frag))
-            req = urllib2.Request(url)
-            base64string = base64.encodestring(auth)[:-1]
-            basic = "Basic " + base64string
-            req.add_header("Authorization", basic)
-        else:
-            req = urllib2.Request(url)
-        url_obj = urllib2.urlopen(req)
-        with open(tmp_path, 'wb') as fp:
-            fp.write(url_obj.read())
-        return tmp_path, url_obj.info()
-
+    from urllib2 import HTTPError, Request, urlopen
 
 from zc.buildout.easy_install import realpath
+from base64 import b64encode
+from contextlib import closing
+import errno
 import logging
+import netrc
 import os
 import os.path
 import re
 import shutil
-import sys
 import tempfile
 import zc.buildout
+from . import bytes2str, str2bytes
+from .rmtree import rmtree
+
 
+class netrc(netrc.netrc):
+
+    def __init__(*args):
+        pass
+
+    def authenticators(self, host):
+        self.__class__, = self.__class__.__bases__
+        try:
+            self.__init__()
+        except IOError as e:
+            if e.errno != errno.ENOENT:
+                raise
+            self.__init__(os.devnull)
+        return self.authenticators(host)
+
+netrc = netrc()
 
 class ChecksumError(zc.buildout.UserError):
     pass
@@ -74,7 +77,8 @@ class Download(object):
     cache: path to the download cache (excluding namespaces)
     namespace: namespace directory to use inside the cache
     offline: whether to operate in offline mode
-    fallback: whether to use the cache as a fallback (try downloading first)
+    fallback: whether to use the cache as a fallback (try downloading first),
+              when an MD5 checksum is not given
     hash_name: whether to use a hash of the URL as cache file name
     logger: an optional logger to receive download-related log messages
 
@@ -107,7 +111,8 @@ class Download(object):
         if self.download_cache is not None:
             return os.path.join(self.download_cache, self.namespace or '')
 
-    def __call__(self, url, md5sum=None, path=None):
+    @property
+    def __call__(self):
         """Download a file according to the utility's configuration.
 
         url: URL to download
@@ -117,19 +122,14 @@ class Download(object):
         Returns the path to the downloaded file.
 
         """
-        if self.cache:
-            local_path, is_temp = self.download_cached(url, md5sum)
-        else:
-            local_path, is_temp = self.download(url, md5sum, path)
+        return self.download_cached if self.cache else self.download
 
-        return locate_at(local_path, path), is_temp
-
-    def download_cached(self, url, md5sum=None):
+    def download_cached(self, url, md5sum=None, path=None, alternate_url=None):
         """Download a file from a URL using the cache.
 
-        This method assumes that the cache has been configured. Optionally, it
-        raises a ChecksumError if a cached copy of a file has an MD5 mismatch,
-        but will not remove the copy in that case.
+        This method assumes that the cache has been configured.
+        If a cached copy of a file has an MD5 mismatch, download
+        and update the cache on success.
 
         """
         if not os.path.exists(self.download_cache):
@@ -146,28 +146,45 @@ class Download(object):
 
         self.logger.debug('Searching cache at %s' % cache_dir)
         if os.path.exists(cached_path):
-            is_temp = False
-            if self.fallback:
-                try:
-                    _, is_temp = self.download(url, md5sum, cached_path)
-                except ChecksumError:
+            if check_md5sum(cached_path, md5sum):
+                if md5sum or not self.fallback:
+                    self.logger.debug('Using cache file %s', cached_path)
+                    return locate_at(cached_path, path), False
+            else:
+                self.logger.warning(
+                    'MD5 checksum mismatch for cached download from %r at %r',
+                    url, cached_path)
+            # Don't download directly to cached_path to minimize
+            # the probability to alter old data if download fails.
+            try:
+                path, is_temp = self.download(url, md5sum, path, alternate_url)
+            except ChecksumError:
+                raise
+            except Exception:
+                if md5sum:
                     raise
-                except Exception:
-                    pass
-
-            if not check_md5sum(cached_path, md5sum):
-                raise ChecksumError(
-                    'MD5 checksum mismatch for cached download '
-                    'from %r at %r' % (url, cached_path))
-            self.logger.debug('Using cache file %s' % cached_path)
+                self.logger.debug("Fallback to cache using %s",
+                                  cached_path, exception=1)
+            else:
+                samefile = getattr(os.path, 'samefile', None)
+                if not (samefile and samefile(path, cached_path)):
+                    # update cache
+                    try:
+                        os.remove(cached_path)
+                    except OSError as e:
+                        if e.errno != errno.EISDIR:
+                            raise
+                        rmtree(cached_path)
+                    locate_at(path, cached_path)
+                return path, is_temp
         else:
             self.logger.debug('Cache miss; will cache %s as %s' %
                               (url, cached_path))
-            _, is_temp = self.download(url, md5sum, cached_path)
+            self.download(url, md5sum, cached_path, alternate_url)
 
-        return cached_path, is_temp
+        return locate_at(cached_path, path), False
 
-    def download(self, url, md5sum=None, path=None):
+    def download(self, url, md5sum=None, path=None, alternate_url=None):
         """Download a file from a URL to a given or temporary path.
 
         An online resource is always downloaded to a temporary file and moved
@@ -196,27 +213,38 @@ class Download(object):
                 "Couldn't download %r in offline mode." % url)
 
         self.logger.info('Downloading %s' % url)
-        handle, tmp_path = tempfile.mkstemp(prefix='buildout-')
-        os.close(handle)
+        download_url = url
+        tmp_path = path
+        cleanup = True
         try:
-            tmp_path, headers = urlretrieve(url, tmp_path)
-            if not check_md5sum(tmp_path, md5sum):
-                raise ChecksumError(
-                    'MD5 checksum mismatch downloading %r' % url)
-        except IOError:
-            e = sys.exc_info()[1]
-            os.remove(tmp_path)
-            raise zc.buildout.UserError("Error downloading extends for URL "
-                              "%s: %s" % (url, e))
-        except Exception:
-            os.remove(tmp_path)
-            raise
-
-        if path:
-            shutil.move(tmp_path, path)
-            return path, False
-        else:
-            return tmp_path, True
+            if not path:
+                handle, tmp_path = tempfile.mkstemp(prefix='buildout-')
+                os.close(handle)
+            self._download(url, tmp_path, md5sum, alternate_url)
+            cleanup = False
+        finally:
+            if cleanup and tmp_path:
+                remove(tmp_path)
+
+        return tmp_path, not path
+
+    def _download(self, url, path, md5sum=None, alternate_url=None):
+        download_url = url
+        try:
+            try:
+                self.urlretrieve(url, path)
+            except HTTPError:
+                if not alternate_url:
+                    raise
+                self.logger.info('using alternate URL: %s', alternate_url)
+                download_url = alternate_url
+                self.urlretrieve(alternate_url, path)
+            if not check_md5sum(path, md5sum):
+                raise ChecksumError('MD5 checksum mismatch downloading %r'
+                                    % download_url)
+        except IOError as e:
+            raise zc.buildout.UserError("Error downloading %s: %s"
+                                        % (download_url, e))
 
     def filename(self, url):
         """Determine a file name from a URL according to the configuration.
@@ -245,6 +273,60 @@ class Download(object):
             url_host, url_port = parsed[-2:]
             return '%s:%s' % (url_host, url_port)
 
+    def _auth(self, url):
+        parsed_url = urlparse(url)
+        if parsed_url.scheme in ('http', 'https'):
+            auth_host = parsed_url.netloc.rsplit('@', 1)
+            if len(auth_host) > 1:
+                return (auth_host[0],
+                        parsed_url._replace(netloc=auth_host[1]).geturl())
+            auth = netrc.authenticators(parsed_url.hostname)
+            if auth:
+                return '{0}:{2}'.format(*auth), url
+
+    def urlretrieve(self, url, tmp_path):
+        auth = self._auth(url)
+        if auth:
+            req = Request(auth[1])
+            req.add_header("Authorization",
+                           "Basic " + bytes2str(b64encode(str2bytes(auth[0]))))
+        else:
+            req = url
+        with closing(urlopen(req)) as src:
+            with open(tmp_path, 'wb') as dst:
+                shutil.copyfileobj(src, dst)
+            return tmp_path, src.info()
+
+
+class Download(Download):
+
+    def _download(self, url, path, md5sum=None, alternate_url=None):
+        from .buildout import networkcache_client as nc
+        while nc: # not a loop
+            if self._auth(url): # do not cache restricted data
+                nc = None
+                break
+            key = 'file-urlmd5:' + md5(url.encode()).hexdigest()
+            if not nc.tryDownload(key):
+                break
+            with nc:
+                entry = next(nc.select(key, {'url': url}), None)
+                if entry is None:
+                    err = 'no matching entry'
+                else:
+                    with closing(nc.download(entry['sha512'])) as src, \
+                         open(path, 'wb') as dst:
+                        shutil.copyfileobj(src, dst)
+                    if check_md5sum(path, md5sum):
+                        return
+                    err = 'MD5 checksum mismatch'
+                self.logger.info('Cannot download from network cache: %s', err)
+            break
+        super(Download, self)._download(url, path, md5sum, alternate_url)
+        if nc and nc.tryUpload(key):
+            with nc, open(path, 'rb') as f:
+                nc.upload(f, key, url=url)
+
 
 def check_md5sum(path, md5sum):
     """Tell whether the MD5 checksum of the file at path matches.

src/zc/buildout/easy_install.py

@@ -18,8 +18,10 @@ It doesn't install scripts.  It uses setuptools and requires it to be
 installed.
 """
 
+import atexit
 import copy
 import distutils.errors
+import distutils.sysconfig
 import errno
 import glob
 import logging
@@ -33,6 +35,7 @@ import setuptools.command.easy_install
 import setuptools.command.setopt
 import setuptools.package_index
 import shutil
+import stat
 import subprocess
 import sys
 import tempfile
@@ -41,6 +44,8 @@ import zc.buildout.rmtree
 from zc.buildout import WINDOWS
 from zc.buildout import PY3
 import warnings
+from contextlib import closing
+from setuptools.package_index import distros_for_location, URL_SCHEME
 import csv
 
 try:
@@ -56,6 +61,8 @@ except ImportError:
 
 BIN_SCRIPTS = 'Scripts' if WINDOWS else 'bin'
 
+WHL_DIST = pkg_resources.EGG_DIST + 1
+
 warnings.filterwarnings(
     'ignore', '.+is being parsed as a legacy, non PEP 440, version')
 
@@ -77,6 +84,9 @@ is_source_encoding_line = re.compile(r'coding[:=]\s*([-\w.]+)').search
 is_win32 = sys.platform == 'win32'
 is_jython = sys.platform.startswith('java')
 
+PATCH_MARKER = 'SlapOSPatched'
+orig_versions_re = re.compile(r'[+\-]%s\d+' % PATCH_MARKER)
+
 if is_jython:
     import java.lang.System
     jython_os_name = (java.lang.System.getProperties()['os.name']).lower()
@@ -91,17 +101,24 @@ if has_distribute and not has_setuptools:
     sys.exit("zc.buildout 3 needs setuptools, not distribute."
              "Did you properly install with pip in a virtualenv ?")
 
-# Include buildout and setuptools eggs in paths.  We get this
-# initially from the entire working set.  Later, we'll use the install
-# function to narrow to just the buildout and setuptools paths.
-buildout_and_setuptools_path = sorted({d.location for d in pkg_resources.working_set})
-setuptools_path = buildout_and_setuptools_path
-pip_path = buildout_and_setuptools_path
-logger.debug('before restricting versions: pip_path %r', pip_path)
+# XXX Take care to respect the sys.path order, as otherwise other
+# distributions for pip, wheel and setuptools may take precedence
+# over the ones currently running.
+pip_path = setuptools_path = [
+  dist.location
+  for dist in pkg_resources.working_set
+  if dist.project_name in ('pip', 'wheel', 'setuptools')
+  ]
+pip_pythonpath = setuptools_pythonpath = os.pathsep.join(pip_path)
+
+python_lib = distutils.sysconfig.get_python_lib()
 
 FILE_SCHEME = re.compile('file://', re.I).match
 DUNDER_FILE_PATTERN = re.compile(r"__file__ = '(?P<filename>.+)'$")
 
+networkcache_key = 'pypi:{}={}'.format
+
+
 class _Monkey(object):
     def __init__(self, module, **kw):
         mdict = self._mdict = module.__dict__
@@ -140,7 +157,7 @@ class AllowHostsPackageIndex(setuptools.package_index.PackageIndex):
 
 _indexes = {}
 def _get_index(index_url, find_links, allow_hosts=('*',)):
-    key = index_url, tuple(find_links)
+    key = index_url, tuple(find_links), allow_hosts
     index = _indexes.get(key)
     if index is not None:
         return index
@@ -165,7 +182,12 @@ if is_win32:
     def _safe_arg(arg):
         return '"%s"' % arg
 else:
-    _safe_arg = str
+    def _safe_arg(arg):
+        if len(arg) < 126:
+            return arg
+        else:
+            # Workaround for the shebang line length limitation.
+            return '/bin/sh\n"exec" "%s" "$0" "$@"' % arg
 
 def call_subprocess(args, **kw):
     if subprocess.call(args, **kw) != 0:
@@ -229,6 +251,10 @@ def dist_needs_pkg_resources(dist):
     )
 
 
+_doing_list = type('', (), {'__mod__': staticmethod(
+    lambda x: '\n    '.join(*x))})()
+
+
 class Installer(object):
 
     _versions = {}
@@ -241,6 +267,7 @@ class Installer(object):
     _allow_picked_versions = True
     _store_required_by = False
     _allow_unknown_extras = False
+    _extra_paths = []
 
     def __init__(self,
                  dest=None,
@@ -275,7 +302,7 @@ class Installer(object):
             links.insert(0, self._download_cache)
 
         self._index_url = index
-        path = (path and path[:] or []) + buildout_and_setuptools_path
+        path = (path and path[:] or []) + self._extra_paths
         self._path = path
         if self._dest is None:
             newest = False
@@ -289,36 +316,15 @@ class Installer(object):
             self._versions = normalize_versions(versions)
 
     def _make_env(self):
-        full_path = self._get_dest_dist_paths() + self._path
-        env = pkg_resources.Environment(full_path)
-        # this needs to be called whenever self._env is modified (or we could
-        # make an Environment subclass):
-        self._eggify_env_dest_dists(env, self._dest)
-        return env
+        dest = self._dest
+        full_path = [] if dest is None else [dest]
+        full_path.extend(self._path)
+        return pkg_resources.Environment(full_path)
 
     def _env_rescan_dest(self):
-        self._env.scan(self._get_dest_dist_paths())
-        self._eggify_env_dest_dists(self._env, self._dest)
-
-    def _get_dest_dist_paths(self):
         dest = self._dest
-        if dest is None:
-            return []
-        eggs = glob.glob(os.path.join(dest, '*.egg'))
-        dists = [os.path.dirname(dist_info) for dist_info in
-                 glob.glob(os.path.join(dest, '*', '*.dist-info'))]
-        return list(set(eggs + dists))
-
-    @staticmethod
-    def _eggify_env_dest_dists(env, dest):
-        """
-        Make sure everything found under `dest` is seen as an egg, even if it's
-        some other kind of dist.
-        """
-        for project_name in env:
-            for dist in env[project_name]:
-                if os.path.dirname(dist.location) == dest:
-                    dist.precedence = pkg_resources.EGG_DIST
+        if dest is not None:
+            self._env.scan([dest])
 
     def _version_conflict_information(self, name):
         """Return textual requirements/constraint information for debug purposes
@@ -423,11 +429,11 @@ class Installer(object):
             str(req))
         return best_we_have, None
 
-    def _call_pip_install(self, spec, dest, dist):
+    def _call_pip_wheel(self, spec, dest, dist):
 
         tmp = tempfile.mkdtemp(dir=dest)
         try:
-            paths = call_pip_install(spec, tmp)
+            paths = call_pip_wheel(spec, tmp, self)
 
             dists = []
             env = pkg_resources.Environment(paths)
@@ -459,30 +465,78 @@ class Installer(object):
 
             result = []
             for d in dists:
-                result.append(_move_to_eggs_dir_and_compile(d, dest))
+                result.append(_move_to_eggs_dir_and_compile(d, dest, self))
 
             return result
 
         finally:
             zc.buildout.rmtree.rmtree(tmp)
 
-    def _obtain(self, requirement, source=None):
-        # initialize out index for this project:
+    def _obtain(self, requirement, source=None, networkcache_failed=False):
+        # get the non-patched version
+        req = str(requirement)
+        if PATCH_MARKER in req:
+            requirement = pkg_resources.Requirement.parse(re.sub(orig_versions_re, '', req))
+
+        wheel = getattr(requirement, 'wheel', False)
+        def filter_precedence(dist):
+            return (dist.precedence == WHL_DIST) == wheel and (
+                dist.precedence == pkg_resources.SOURCE_DIST if source
+                else not (dist.precedence == pkg_resources.DEVELOP_DIST
+                          and {'setup.py', 'pyproject.toml'}.isdisjoint(
+                              os.listdir(dist.location)))
+                )
+
         index = self._index
+        if not networkcache_failed:
+            try:
+                (operator, version,), = requirement.specs
+            except ValueError:
+                pass
+            else:
+                # Network cache is not expected to contain all versions so it
+                # couldn't tell whether a found version is the best existing
+                # one. Therefore, it's only accessed when we have a
+                # specification for a single version, which is anyway enough
+                # for our usage (picked versions not allowed).
+                if operator == '==':
+                    # But first, avoid any network access by checking local
+                    # urls. PackageIndex.add_find_links scans them immediately.
+                    dists = [dist for dist in index[requirement.project_name]
+                        if dist in requirement and filter_precedence(dist) and (
+                            FILE_SCHEME(dist.location) or
+                            not URL_SCHEME(dist.location))]
+                    if dists:
+                        return max(dists)
+                    from .buildout import networkcache_client as nc
+                    if nc:
+                        key = networkcache_key(requirement.key, version)
+                        if nc.tryDownload(key):
+                            with nc:
+                                for entry in nc.select(key):
+                                    basename = entry['basename']
+                                    for dist in distros_for_location(
+                                            entry['sha512'], basename):
+                                        # The version comparison is to keep
+                                        # the one that's correctly parsed by
+                                        # distros_for_location.
+                                        if (dist.version == version and
+                                                self._env.can_add(dist) and
+                                                filter_precedence(dist)):
+                                            dist.networkcache = (
+                                                basename, requirement, source)
+                                            dists.append(dist)
+                            if dists:
+                                return max(dists)
 
+        # initialize out index for this project:
         if index.obtain(requirement) is None:
             # Nothing is available.
             return None
 
         # Filter the available dists for the requirement and source flag
         dists = [dist for dist in index[requirement.project_name]
-                 if ((dist in requirement)
-                     and
-                     ((not source) or
-                      (dist.precedence == pkg_resources.SOURCE_DIST)
-                      )
-                     )
-                 ]
+                      if dist in requirement and filter_precedence(dist)]
 
         # If we prefer final dists, filter for final and use the
         # result if it is non empty.
@@ -519,18 +573,41 @@ class Installer(object):
                     ):
                     return dist
 
-        best.sort()
-        return best[-1]
+        return max(best)
 
     def _fetch(self, dist, tmp, download_cache):
-        if (download_cache
-            and (realpath(os.path.dirname(dist.location)) == download_cache)
-            ):
-            logger.debug("Download cache has %s at: %s", dist, dist.location)
-            return dist
+        from .buildout import networkcache_client as nc
+        while hasattr(dist, 'networkcache'):
+            basename, requirement, source = dist.networkcache
+            new_location = os.path.join(tmp, basename)
+            with nc, closing(nc.download(dist.location)) as src, \
+                     open(new_location, 'wb') as dst:
+                shutil.copyfileobj(src, dst)
+                break
+            # Downloading content from network cache failed: let's resume index
+            # lookup to get a fallback url. This will respect _satisfied()
+            # decision because the specification is for a single version.
+            dist = self._obtain(requirement, source, networkcache_failed=True)
+            if dist is None:
+                raise zc.buildout.UserError(
+                    "Couldn't find a distribution for %r."
+                    % str(requirement))
+        else:
+            if (download_cache
+                and (realpath(os.path.dirname(dist.location)) == download_cache)
+                ):
+                logger.debug("Download cache has %s at: %s", dist, dist.location)
+                return dist
+
+            logger.debug("Fetching %s from: %s", dist, dist.location)
+            new_location = self._index.download(dist.location, tmp)
+            if nc:
+                key = networkcache_key(dist.key, dist.version)
+                if nc.tryUpload(key):
+                    with nc, open(new_location, 'rb') as f:
+                        nc.upload(f, key,
+                            basename=os.path.basename(new_location))
 
-        logger.debug("Fetching %s from: %s", dist, dist.location)
-        new_location = self._index.download(dist.location, tmp)
         if (download_cache
             and (realpath(new_location) == realpath(dist.location))
             and os.path.isfile(new_location)
@@ -578,7 +655,7 @@ class Installer(object):
                     raise zc.buildout.UserError(
                         "Couldn't download distribution %s." % avail)
 
-                dists = [_move_to_eggs_dir_and_compile(dist, self._dest)]
+                dists = [_move_to_eggs_dir_and_compile(dist, self._dest, self)]
                 for _d in dists:
                     if _d not in ws:
                         ws.add(_d, replace=True)
@@ -660,6 +737,9 @@ class Installer(object):
         """Return requirement with optional [versions] constraint added."""
         constraint = self._versions.get(requirement.project_name.lower())
         if constraint:
+            wheel = constraint.endswith(':whl')
+            if wheel:
+                constraint = constraint[:-4]
             try:
                 requirement = _constrained_requirement(constraint,
                                                        requirement)
@@ -667,12 +747,15 @@ class Installer(object):
                 logger.info(self._version_conflict_information(
                     requirement.project_name.lower()))
                 raise
+            if wheel:
+                requirement.wheel = True
 
         return requirement
 
-    def install(self, specs, working_set=None):
+    def install(self, specs, working_set=None, patch_dict=None):
 
         logger.debug('Installing %s.', repr(specs)[1:-1])
+        __doing__ = _doing_list, self._requirements_and_constraints
         self._requirements_and_constraints.append(
             "Base installation request: %s" % repr(specs)[1:-1])
 
@@ -693,6 +776,9 @@ class Installer(object):
             ws = working_set
 
         for requirement in requirements:
+            if patch_dict and requirement.project_name in patch_dict:
+                self._env.scan(
+                    self.build(str(requirement), {}, patch_dict=patch_dict))
             for dist in self._get_dist(requirement, ws):
                 self._maybe_add_setuptools(ws, dist)
 
@@ -706,10 +792,6 @@ class Installer(object):
         requirements.reverse() # Set up the stack.
         processed = {}  # This is a set of processed requirements.
         best = {}  # This is a mapping of package name -> dist.
-        # Note that we don't use the existing environment, because we want
-        # to look for new eggs unless what we have is the best that
-        # matches the requirement.
-        env = pkg_resources.Environment(ws.entries)
 
         while requirements:
             # Process dependencies breadth-first.
@@ -721,7 +803,15 @@ class Installer(object):
             dist = best.get(req.key)
             if dist is None:
                 try:
-                    dist = env.best_match(req, ws)
+                    # Note that we first attempt to find an already active dist
+                    # in the working set. This will detect version conflicts.
+                    # XXX We expressly avoid activating dists in the entries of
+                    # the current working set: they might not reflect the order
+                    # of the environment. This is not so bad when the versions
+                    # are pinned, but when calling install(['zc.buildout']), it
+                    # can come up with completely different dists than the ones
+                    # currently running.
+                    dist = ws.find(req)
                 except pkg_resources.VersionConflict as err:
                     logger.debug(
                         "Version conflict while processing requirement %s "
@@ -741,6 +831,9 @@ class Installer(object):
                 else:
                     logger.debug('Adding required %r', str(req))
                 self._log_requirement(ws, req)
+                if patch_dict and req.project_name in patch_dict:
+                    self._env.scan(
+                        self.build(str(req), {}, patch_dict=patch_dict))
                 for dist in self._get_dist(req, ws):
                     self._maybe_add_setuptools(ws, dist)
             if dist not in req:
@@ -787,7 +880,7 @@ class Installer(object):
             processed[req] = True
         return ws
 
-    def build(self, spec, build_ext):
+    def build(self, spec, build_ext, patch_dict=None):
 
         requirement = self._constrain(pkg_resources.Requirement.parse(spec))
 
@@ -838,14 +931,33 @@ class Installer(object):
                             )
                     base = os.path.dirname(setups[0])
 
+                setup_cfg_dict = {'build_ext':build_ext}
+                patch_dict = (patch_dict or {}).get(re.sub('[<>=].*', '', spec))
+                if patch_dict:
+                    setup_cfg_dict.update(
+                      {'egg_info':{'tag_build':'+%s%03d' % (PATCH_MARKER,
+                                                            patch_dict['patch_revision'])}})
+                    for i, patch in enumerate(patch_dict['patches']):
+                        url, md5sum = (patch.strip().split('#', 1) + [''])[:2]
+                        download = zc.buildout.download.Download()
+                        path, is_temp = download(url, md5sum=md5sum or None,
+                                                 path=os.path.join(tmp, 'patch.%s' % i))
+                        args = [patch_dict['patch_binary']] + patch_dict['patch_options']
+                        kwargs = {'cwd':base,
+                                  'stdin':open(path)}
+                        popen = subprocess.Popen(args, **kwargs)
+                        popen.communicate()
+                        if popen.returncode != 0:
+                            raise subprocess.CalledProcessError(
+                                popen.returncode, ' '.join(args))
                 setup_cfg = os.path.join(base, 'setup.cfg')
                 if not os.path.exists(setup_cfg):
                     f = open(setup_cfg, 'w')
                     f.close()
                 setuptools.command.setopt.edit_config(
-                    setup_cfg, dict(build_ext=build_ext))
+                    setup_cfg, setup_cfg_dict)
 
-                dists = self._call_pip_install(base, self._dest, dist)
+                dists = self._call_pip_wheel(base, self._dest, dist)
 
                 return [dist.location for dist in dists]
             finally:
@@ -946,6 +1058,12 @@ def get_picked_versions():
     required_by = Installer._required_by
     return (picked_versions, required_by)
 
+def extra_paths(setting=None):
+    old = Installer._extra_paths
+    if setting is not None:
+        Installer._extra_paths = setting
+    return old
+
 
 def install(specs, dest,
             links=(), index=None,
@@ -957,6 +1075,7 @@ def install(specs, dest,
             allowed_eggs_from_site_packages=None,
             check_picked=True,
             allow_unknown_extras=False,
+            patch_dict=None,
             ):
     assert executable == sys.executable, (executable, sys.executable)
     assert include_site_packages is None
@@ -968,31 +1087,19 @@ def install(specs, dest,
                           allow_hosts=allow_hosts,
                           check_picked=check_picked,
                           allow_unknown_extras=allow_unknown_extras)
-    return installer.install(specs, working_set)
-
-buildout_and_setuptools_dists = list(install(['zc.buildout'], None,
-                                             check_picked=False))
-buildout_and_setuptools_path = sorted({d.location
-                                for d in buildout_and_setuptools_dists})
-
-pip_dists = [d for d in buildout_and_setuptools_dists if d.project_name != 'zc.buildout']
-pip_path = sorted({d.location for d in pip_dists})
-logger.debug('after restricting versions: pip_path %r', pip_path)
-pip_pythonpath = os.pathsep.join(pip_path)
-
-setuptools_path = pip_path
-setuptools_pythonpath = pip_pythonpath
+    return installer.install(specs, working_set, patch_dict=patch_dict)
 
 
 def build(spec, dest, build_ext,
           links=(), index=None,
           executable=sys.executable,
-          path=None, newest=True, versions=None, allow_hosts=('*',)):
+          path=None, newest=True, versions=None, allow_hosts=('*',),
+          patch_dict=None):
     assert executable == sys.executable, (executable, sys.executable)
     installer = Installer(dest, links, index, executable,
                           True, path, newest,
                           versions, allow_hosts=allow_hosts)
-    return installer.build(spec, build_ext)
+    return installer.build(spec, build_ext, patch_dict=patch_dict)
 
 
 def _rm(*paths):
@@ -1097,9 +1204,15 @@ def develop(setup, dest,
         undo.append(lambda: os.remove(tsetup))
         undo.append(lambda: os.close(fd))
 
+        extra_path = os.environ.get('PYTHONEXTRAPATH')
+        extra_path_list = []
+        if extra_path:
+          extra_path_list = extra_path.split(os.pathsep)
+
         os.write(fd, (runsetup_template % dict(
             setupdir=directory,
             setup=setup,
+            path_list=extra_path_list,
             __file__ = setup,
             )).encode())
 
@@ -1159,6 +1272,10 @@ def scripts(reqs, working_set, executable, dest=None,
         if p not in unique_path:
             unique_path.append(p)
     path = [realpath(p) for p in unique_path]
+    try:
+        path.remove(python_lib)
+    except ValueError:
+        pass
 
     generated = []
 
@@ -1176,14 +1293,16 @@ def scripts(reqs, working_set, executable, dest=None,
             req = pkg_resources.Requirement.parse(req)
             if req.marker and not req.marker.evaluate():
                 continue
+            has_extras = set(req.extras).issuperset
             dist = working_set.find(req)
             # regular console_scripts entry points
             for name in pkg_resources.get_entry_map(dist, 'console_scripts'):
                 entry_point = dist.get_entry_info('console_scripts', name)
-                entry_points.append(
-                    (name, entry_point.module_name,
-                     '.'.join(entry_point.attrs))
-                    )
+                if has_extras(entry_point.extras):
+                    entry_points.append(
+                        (name, entry_point.module_name,
+                         '.'.join(entry_point.attrs))
+                        )
             # The metadata on "old-style" distutils scripts is not retained by
             # distutils/setuptools, except by placing the original scripts in
             # /EGG-INFO/scripts/.
@@ -1329,6 +1448,12 @@ join = os.path.join
 base = os.path.dirname(os.path.abspath(os.path.realpath(__file__)))
 """
 
+def _initialization(path, initialization):
+    return """sys.path[0:0] = [
+  %s,
+  ]
+""" % path + initialization if path else initialization
+
 def _script(module_name, attrs, path, dest, arguments, initialization, rsetup):
     if is_win32:
         dest += '-script.py'
@@ -1337,11 +1462,10 @@ def _script(module_name, attrs, path, dest, arguments, initialization, rsetup):
 
     contents = script_template % dict(
         python = python,
-        path = path,
         module_name = module_name,
         attrs = attrs,
         arguments = arguments,
-        initialization = initialization,
+        initialization = _initialization(path, initialization),
         relative_paths_setup = rsetup,
         )
     return _create_script(contents, dest)
@@ -1374,8 +1498,7 @@ def _distutils_script(path, dest, script_content, initialization, rsetup):
 
     contents = distutils_script_template % dict(
         python = python,
-        path = path,
-        initialization = initialization,
+        initialization = _initialization(path, initialization),
         relative_paths_setup = rsetup,
         before = before,
         after = after
@@ -1443,9 +1566,6 @@ script_template = script_header + '''\
 
 %(relative_paths_setup)s
 import sys
-sys.path[0:0] = [
-  %(path)s,
-  ]
 %(initialization)s
 import %(module_name)s
 
@@ -1457,9 +1577,6 @@ distutils_script_template = script_header + '''
 %(before)s
 %(relative_paths_setup)s
 import sys
-sys.path[0:0] = [
-  %(path)s,
-  ]
 %(initialization)s
 
 %(after)s'''
@@ -1472,14 +1589,12 @@ def _pyscript(path, dest, rsetup, initialization=''):
         dest += '-script.py'
 
     python = _safe_arg(sys.executable)
-    if path:
-        path += ','  # Courtesy comma at the end of the list.
 
     contents = py_script_template % dict(
         python = python,
         path = path,
         relative_paths_setup = rsetup,
-        initialization=initialization,
+        initialization = _initialization(path, initialization),
         )
     changed = _file_changed(dest, contents)
 
@@ -1514,9 +1629,6 @@ py_script_template = script_header + '''\
 %%(relative_paths_setup)s
 import sys
 
-sys.path[0:0] = [
-  %%(path)s
-  ]
 %%(initialization)s
 
 _interactive = True
@@ -1551,8 +1663,14 @@ import sys
 sys.path.insert(0, %%(setupdir)r)
 sys.path[0:0] = %r
 
+for extra_path in %%(path_list)r:
+  sys.path.insert(0, extra_path)
+
+
 import os, setuptools
 
+os.environ['PYTHONPATH'] = (os.pathsep).join(sys.path[:])
+
 __file__ = %%(__file__)r
 
 os.chdir(%%(setupdir)r)
@@ -1595,25 +1713,49 @@ class MissingDistribution(zc.buildout.UserError):
         req, ws = self.data
         return "Couldn't find a distribution for %r." % str(req)
 
+def chmod(path):
+    mode = os.lstat(path).st_mode
+    if stat.S_ISLNK(mode):
+        return
+    # give the same permission but write as owner to group and other.
+    mode = stat.S_IMODE(mode)
+    urx = (mode >> 6) & 5
+    new_mode = mode & ~0o77 | urx << 3 | urx
+    if new_mode != mode:
+        os.chmod(path, new_mode)
+
 def redo_pyc(egg):
     if not os.path.isdir(egg):
         return
     for dirpath, dirnames, filenames in os.walk(egg):
+        chmod(dirpath)
         for filename in filenames:
+            filepath = os.path.join(dirpath, filename)
+            try:
+                chmod(filepath)
+            except OSError as e:
+                if e.errno != errno.ENOENT:
+                    raise
+                continue
             if not filename.endswith('.py'):
                 continue
-            filepath = os.path.join(dirpath, filename)
-            if not (os.path.exists(filepath+'c')
-                    or os.path.exists(filepath+'o')):
+
+            old = []
+            pycache = os.path.join(dirpath, '__pycache__',
+                                   filename[:-3] + '.*.py')
+            for suffix in 'co':
+                if os.path.exists(filepath + suffix):
+                    old.append(filepath + suffix)
+                old += glob.glob(pycache + suffix)
+            if not old:
                 # If it wasn't compiled, it may not be compilable
                 continue
 
             # OK, it looks like we should try to compile.
 
             # Remove old files.
-            for suffix in 'co':
-                if os.path.exists(filepath+suffix):
-                    os.remove(filepath+suffix)
+            for old in old:
+                os.remove(old)
 
             # Compile under current optimization
             try:
@@ -1657,19 +1799,34 @@ class IncompatibleConstraintError(zc.buildout.UserError):
 IncompatibleVersionError = IncompatibleConstraintError # Backward compatibility
 
 
-def call_pip_install(spec, dest):
+# Temporary HOME with .pydistutils.cfg to disable setup_requires
+pip_pydistutils_home = tempfile.mkdtemp('pip-pydistutils-home')
+with open(os.path.join(pip_pydistutils_home, '.pydistutils.cfg'), 'w') as f:
+    f.write("[easy_install]\n"
+            "index-url = file:///dev/null")
+atexit.register(zc.buildout.rmtree.rmtree, pip_pydistutils_home)
+
+def call_pip_wheel(spec, dest, options):
     """
-    Call `pip install` from a subprocess to install a
+    Call `pip wheel` from a subprocess to install a
     distribution specified by `spec` into `dest`.
     Returns all the paths inside `dest` created by the above.
     """
-    args = [sys.executable, '-m', 'pip', 'install', '--no-deps', '-t', dest]
+    args = [sys.executable, '-m', 'pip', 'wheel', '--no-deps', '-w', dest]
     level = logger.getEffectiveLevel()
     if level >= logging.INFO:
         args.append('-q')
     else:
         args.append('-v')
 
+    # Prevent pip from installing build dependencies on the fly
+    # without respecting pinned versions. This only works for
+    # PEP 517 specifications using pyproject.toml and not for
+    # dependencies in setup_requires option in legacy setup.py
+    if not options._allow_picked_versions:
+        args.append('--no-index')
+        args.append('--no-build-isolation')
+
     args.append(spec)
 
     try:
@@ -1678,14 +1835,19 @@ def call_pip_install(spec, dest):
     except ImportError:
         HAS_WARNING_OPTION = False
     if HAS_WARNING_OPTION:
-        if not hasattr(call_pip_install, 'displayed'):
-            call_pip_install.displayed = True
+        if not hasattr(call_pip_wheel, 'displayed'):
+            call_pip_wheel.displayed = True
         else:
             args.append('--no-python-version-warning')
 
-    env = copy.copy(os.environ)
-    python_path = copy.copy(pip_path)
-    python_path.append(env.get('PYTHONPATH', ''))
+    env = os.environ.copy()
+    python_path = pip_path[:]
+    env_paths = env.get('PYTHONPATH')
+    if env_paths:
+        python_path.append(env_paths)
+    extra_env_path = env.get('PYTHONEXTRAPATH')
+    if extra_env_path:
+        python_path.append(extra_env_path)
     env['PYTHONPATH'] = os.pathsep.join(python_path)
 
     if level <= logging.DEBUG:
@@ -1694,138 +1856,33 @@ def call_pip_install(spec, dest):
 
     sys.stdout.flush() # We want any pending output first
 
-    exit_code = subprocess.call(list(args), env=env)
+    # Prevent setuptools from downloading and thus installing
+    # build dependencies specified in setup_requires option of
+    # legacy setup.py by providing a crafted .pydistutils.cfg.
+    # This is used in complement to --no-build-isolation.
+    if not options._allow_picked_versions:
+        env['HOME'] = pip_pydistutils_home
 
-    if exit_code:
-        logger.error(
-            "An error occurred when trying to install %s. "
-            "Look above this message for any errors that "
-            "were output by pip install.",
-            spec)
-        sys.exit(1)
+    subprocess.check_call(args, env=env)
 
-    split_entries = [os.path.splitext(entry) for entry in os.listdir(dest)]
+    entries = os.listdir(dest)
     try:
-        distinfo_dir = [
-            base + ext for base, ext in split_entries if ext == ".dist-info"
-        ][0]
-    except IndexError:
+        assert len(entries) == 1, "Got multiple entries afer pip wheel"
+        wheel = entries[0]
+        assert os.path.splitext(wheel)[1] == '.whl', "Expected a .whl"
+    except AssertionError:
         logger.error(
-            "No .dist-info directory after successful pip install of %s",
+            "No .whl after successful pip wheel of %s",
             spec)
         raise
 
-    return make_egg_after_pip_install(dest, distinfo_dir)
+    return make_egg_after_pip_wheel(dest, wheel)
 
 
-def make_egg_after_pip_install(dest, distinfo_dir):
-    """build properly named egg directory"""
-
-    # `pip install` does not build the namespace aware __init__.py files
-    # but they are needed in egg directories.
-    # Add them before moving files setup by pip
-    namespace_packages_file = os.path.join(
-        dest, distinfo_dir,
-        'namespace_packages.txt'
-    )
-    if os.path.isfile(namespace_packages_file):
-        with open(namespace_packages_file) as f:
-            namespace_packages = [
-                line.strip().replace('.', os.path.sep)
-                for line in f.readlines()
-            ]
-
-        for namespace_package in namespace_packages:
-            namespace_package_dir = os.path.join(dest, namespace_package)
-            if os.path.isdir(namespace_package_dir):
-                init_py_file = os.path.join(
-                    namespace_package_dir, '__init__.py')
-                with open(init_py_file, 'w') as f:
-                    f.write(
-                        "__import__('pkg_resources')."
-                        "declare_namespace(__name__)"
-                    )
-
-    # Remove `bin` directory if needed
-    # as there is no way to avoid script installation
-    # when running `pip install`
-    entry_points_file = os.path.join(dest, distinfo_dir, 'entry_points.txt')
-    if os.path.isfile(entry_points_file):
-        with open(entry_points_file) as f:
-            content = f.read()
-            if "console_scripts" in content or "gui_scripts" in content:
-                bin_dir = os.path.join(dest, BIN_SCRIPTS)
-                if os.path.exists(bin_dir):
-                    shutil.rmtree(bin_dir)
-
-    # Make properly named new egg dir
-    distro = list(pkg_resources.find_distributions(dest))[0]
-    base = "{}-{}".format(
-        distro.egg_name(), pkg_resources.get_supported_platform()
-    )
-    egg_name = base + '.egg'
-    new_distinfo_dir = base + '.dist-info'
-    egg_dir = os.path.join(dest, egg_name)
-    os.mkdir(egg_dir)
-
-    # Move ".dist-info" dir into new egg dir
-    os.rename(
-        os.path.join(dest, distinfo_dir),
-        os.path.join(egg_dir, new_distinfo_dir)
-    )
-
-    top_level_file = os.path.join(egg_dir, new_distinfo_dir, 'top_level.txt')
-    if os.path.isfile(top_level_file):
-        with open(top_level_file) as f:
-            top_levels = filter(
-                (lambda x: len(x) != 0),
-                [line.strip() for line in f.readlines()]
-                )
-    else:
-        top_levels = ()
-
-    # Move all top_level modules or packages
-    for top_level in top_levels:
-        # as package
-        top_level_dir = os.path.join(dest, top_level)
-        if os.path.exists(top_level_dir):
-            shutil.move(top_level_dir, egg_dir)
-            continue
-        # as module
-        top_level_py = top_level_dir + '.py'
-        if os.path.exists(top_level_py):
-            shutil.move(top_level_py, egg_dir)
-            top_level_pyc = top_level_dir + '.pyc'
-            if os.path.exists(top_level_pyc):
-                shutil.move(top_level_pyc, egg_dir)
-            continue
-
-    record_file = os.path.join(egg_dir, new_distinfo_dir, 'RECORD')
-    if os.path.isfile(record_file):
-        if PY3:
-            with open(record_file, newline='') as f:
-                all_files = [row[0] for row in csv.reader(f)]
-        else:
-            with open(record_file, 'rb') as f:
-                all_files = [row[0] for row in csv.reader(f)]
-
-    # There might be some c extensions left over
-    for entry in all_files:
-        if entry.endswith(('.pyc', '.pyo')):
-            continue
-        dest_entry = os.path.join(dest, entry)
-        # work around pip install -t bug that leaves entries in RECORD
-        # that starts with '../../'
-        if not os.path.abspath(dest_entry).startswith(dest):
-            continue
-        egg_entry = os.path.join(egg_dir, entry)
-        if os.path.exists(dest_entry) and not os.path.exists(egg_entry):
-            egg_entry_dir = os.path.dirname(egg_entry)
-            if not os.path.exists(egg_entry_dir):
-                os.makedirs(egg_entry_dir)
-            os.rename(dest_entry, egg_entry)
-
-    return [egg_dir]
+def make_egg_after_pip_wheel(dest, wheel):
+    unpack_wheel(os.path.join(dest, wheel), dest)
+    assert len(os.listdir(dest)) == 2
+    return glob.glob(os.path.join(dest, '*.egg'))
 
 
 def unpack_egg(location, dest):
@@ -1872,7 +1929,7 @@ def _get_matching_dist_in_location(dist, location):
     if dist_infos == [(dist.project_name.lower(), dist.parsed_version)]:
         return dists.pop()
 
-def _move_to_eggs_dir_and_compile(dist, dest):
+def _move_to_eggs_dir_and_compile(dist, dest, options):
     """Move distribution to the eggs destination directory.
 
     And compile the py files, if we have actually moved the dist.
@@ -1913,7 +1970,7 @@ def _move_to_eggs_dir_and_compile(dist, dest):
                 unpacker(dist.location, tmp_dest)
                 [tmp_loc] = glob.glob(os.path.join(tmp_dest, '*'))
             else:
-                [tmp_loc] = call_pip_install(dist.location, tmp_dest)
+                [tmp_loc] = call_pip_wheel(dist.location, tmp_dest, options)
                 installed_with_pip = True
 
         # We have installed the dist. Now try to rename/move it.
@@ -1954,7 +2011,7 @@ def _move_to_eggs_dir_and_compile(dist, dest):
     return newdist
 
 
-def sort_working_set(ws, eggs_dir, develop_eggs_dir):
+def get_develop_paths(develop_eggs_dir):
     develop_paths = set()
     pattern = os.path.join(develop_eggs_dir, '*.egg-link')
     for egg_link in glob.glob(pattern):
@@ -1962,21 +2019,30 @@ def sort_working_set(ws, eggs_dir, develop_eggs_dir):
             path = f.readline().strip()
             if path:
                 develop_paths.add(path)
+    return develop_paths
 
-    sorted_paths = []
-    egg_paths = []
-    other_paths = []
+
+def sort_working_set(ws, buildout_dir, eggs_dir, develop_eggs_dir):
+    develop_paths = get_develop_paths(develop_eggs_dir)
+    dists_priorities = tuple([] for i in range(5))
     for dist in ws:
         path = dist.location
-        if path in develop_paths:
-            sorted_paths.append(path)
-        elif os.path.commonprefix([path, eggs_dir]) == eggs_dir:
-            egg_paths.append(path)
+        if os.path.commonprefix([path, eggs_dir]) == eggs_dir:
+            # Dists from eggs first because we know they contain a single dist.
+            priority = 0
+        if os.path.commonprefix([path, buildout_dir]) == buildout_dir:
+            # We assume internal locations contain a single dist too.
+            priority = 1 + 2 * (path not in develop_paths) # 1 or 3
         else:
-            other_paths.append(path)
-    sorted_paths.extend(egg_paths)
-    sorted_paths.extend(other_paths)
-    return pkg_resources.WorkingSet(sorted_paths)
+            priority = 2 + 2 * (path not in develop_paths) # 2 or 4
+        dists_priorities[priority].append(dist)
+    # We add dists to an empty working set manually instead of adding the paths
+    # to avoid activating other dists at the same locations.
+    ws = pkg_resources.WorkingSet([])
+    for dists in dists_priorities:
+        for dist in dists:
+            ws.add(dist)
+    return ws
 
 
 NOT_PICKED_AND_NOT_ALLOWED = """\

src/zc/buildout/rmtree.py

@@ -16,7 +16,8 @@
 import shutil
 import os
 import doctest
-import time
+import errno
+import sys
 
 def rmtree (path):
     """
@@ -26,6 +27,10 @@ def rmtree (path):
     process (e.g. antivirus scanner). This tries to chmod the
     file to writeable and retries 10 times before giving up.
 
+    Also it tries to remove symlink itself if a symlink as passed as
+    path argument.
+
+    Finally, it tries to make parent directory writable.
     >>> from tempfile import mkdtemp
 
     Let's make a directory ...
@@ -41,13 +46,51 @@ def rmtree (path):
 
     >>> foo = os.path.join (d, 'foo')
     >>> with open (foo, 'w') as f: _ = f.write ('huhu')
+    >>> bar = os.path.join (d, 'bar')
+    >>> os.symlink(bar, bar)
 
     and make it unwriteable
 
-    >>> os.chmod (foo, 256) # 0400
+    >>> os.chmod (foo, 0o400)
+
+    and make parent dir unwritable
+
+    >>> os.chmod (d, 0o400)
+
+    rmtree should be able to remove it:
+
+    >>> rmtree (d)
+
+    and now the directory is gone
+
+    >>> os.path.isdir (d)
+    0
+
+    Let's make a directory ...
+
+    >>> d = mkdtemp()
+
+    and make sure it is actually there
+
+    >>> os.path.isdir (d)
+    1
+
+    Now create a broken symlink ...
+
+    >>> foo = os.path.join (d, 'foo')
+    >>> os.symlink(foo + '.not_exist', foo)
 
     rmtree should be able to remove it:
 
+    >>> rmtree (foo)
+
+    and now the directory is gone
+
+    >>> os.path.isdir (foo)
+    0
+
+    cleanup directory
+
     >>> rmtree (d)
 
     and now the directory is gone
@@ -55,20 +98,43 @@ def rmtree (path):
     >>> os.path.isdir (d)
     0
     """
-    def retry_writeable (func, path, exc):
-        os.chmod (path, 384) # 0600
-        for i in range(10):
-            try:
-                func (path)
-                break
-            except OSError:
-                time.sleep(0.1)
+    def chmod_retry(func, failed_path, exc_info):
+        """Make sure the directories are executable and writable.
+        """
+        if func is os.path.islink:
+            os.unlink(path)
+        elif func is os.lstat or func is os.open:
+            if not os.path.islink(path):
+                raise
+            os.unlink(path)
         else:
-            # tried 10 times without success, thus
-            # finally rethrow the last exception
+            # Depending on the Python version, the following items differ.
+            if sys.version_info >= (3, ):
+                expected_error_type = PermissionError
+                expected_func_tuple = (os.lstat, os.open)
+            else:
+                expected_error_type = OSError
+                expected_func_tuple = (os.listdir, )
+            e = exc_info[1]
+            if isinstance(e, expected_error_type):
+                if e.errno == errno.ENOENT:
+                    # because we are calling again rmtree on listdir errors, this path might
+                    # have been already deleted by the recursive call to rmtree.
+                    return
+                if e.errno == errno.EACCES:
+                    if func in expected_func_tuple:
+                        os.chmod(failed_path, 0o700)
+                        # corner case to handle errors in listing directories.
+                        # https://bugs.python.org/issue8523
+                        return shutil.rmtree(failed_path, onerror=chmod_retry)
+                    # If parent directory is not writable, we still cannot delete the file.
+                    # But make sure not to change the parent of the folder we are deleting.
+                    if failed_path != path:
+                        os.chmod(os.path.dirname(failed_path), 0o700)
+                        return func(failed_path)
             raise
 
-    shutil.rmtree (path, onerror = retry_writeable)
+    shutil.rmtree(path, onerror=chmod_retry)
 
 def test_suite():
     return doctest.DocTestSuite()

src/zc/buildout/testing.py

@@ -23,6 +23,7 @@ except ImportError:
     from BaseHTTPServer import HTTPServer, BaseHTTPRequestHandler
     from urllib2        import urlopen
 
+import base64
 import errno
 import logging
 import multiprocessing
@@ -222,6 +223,9 @@ class Buildout(zc.buildout.buildout.Buildout):
 
     Options = TestOptions
 
+    def initialize(self, *args):
+        pass
+
 def buildoutSetUp(test):
 
     test.globs['__tear_downs'] = __tear_downs = []
@@ -412,6 +416,23 @@ class Handler(BaseHTTPRequestHandler):
             self.__server.__log = False
             return k()
 
+        if self.path.startswith('/private/'):
+            auth = self.headers.get('Authorization')
+            if auth and auth.startswith('Basic ') and \
+                self.path[9:].encode() == base64.b64decode(
+                    self.headers.get('Authorization')[6:]):
+                return k()
+            # But not returning 401+WWW-Authenticate, we check that the client
+            # skips auth challenge, which is not free (in terms of performance)
+            # and useless for what we support.
+            self.send_response(403, 'Forbidden')
+            out = '<html><body>Forbidden</body></html>'.encode()
+            self.send_header('Content-Length', str(len(out)))
+            self.send_header('Content-Type', 'text/html')
+            self.end_headers()
+            self.wfile.write(out)
+            return
+
         path = os.path.abspath(os.path.join(self.tree, *self.path.split('/')))
         if not (
             ((path == self.tree) or path.startswith(self.tree+os.path.sep))
@@ -622,6 +643,8 @@ ignore_not_upgrading = (
     'Not upgrading because not running a local buildout command.\n'
     ), '')
 
+os.environ['BUILDOUT_INFO_REINSTALL_REASON'] = '0'
+
 def run_buildout(command):
     # Make sure we don't get .buildout
     os.environ['HOME'] = os.path.join(os.getcwd(), 'home')

src/zc/buildout/tests/__init__.py

@@ -123,6 +123,45 @@ def create_sample_eggs(test, executable=sys.executable):
             )
         zc.buildout.testing.bdist_egg(tmp, sys.executable, dest)
 
+        write(tmp, 'builddep.py', '')
+        write(
+            tmp, 'setup.py',
+            "from setuptools import setup\n"
+            "setup(name='builddep', "
+            " py_modules=['builddep'], "
+            " zip_safe=True, version='0.1')\n"
+            )
+        zc.buildout.testing.sdist(tmp, dest)
+
+        write(tmp, 'withsetuprequires.py', '')
+        write(
+            tmp, 'setup.py',
+            "from setuptools import setup\n"
+            "setup(name='withsetuprequires', "
+            " setup_requires = 'builddep', "
+            " py_modules=['withsetuprequires'], "
+            " zip_safe=True, version='0.1')\n"
+            "import builddep"
+            )
+        zc.buildout.testing.sdist(tmp, dest)
+
+        write(tmp, 'withbuildsystemrequires.py', '')
+        write(tmp, 'pyproject.toml',
+            '[build-system]\n'
+            'requires = ["builddep"]'
+            )
+        write(
+            tmp, 'setup.py',
+            "from setuptools import setup\n"
+            "setup(name='withbuildsystemrequires', "
+            " setup_requires = 'builddep', "
+            " py_modules=['withbuildsystemrequires'], "
+            " package_data={'withbuildsystemrequires': ['pyproject.toml']}, "
+            " zip_safe=True, version='0.1')\n"
+            "import builddep"
+            )
+        zc.buildout.testing.sdist(tmp, dest)
+
     finally:
         shutil.rmtree(tmp)
 

src/zc/buildout/tests/allow-unknown-extras.txt

@@ -40,6 +40,7 @@ Now we can run the buildout and see that it fails:
     ...
     While:
       Installing eggs.
+      Base installation request: 'allowdemo[bad_extra]'
     Error: Couldn't find the required extra...
 
 If we flip the option on, the buildout succeeds

src/zc/buildout/tests/allowhosts.txt

@@ -61,6 +61,8 @@ Now we can run the buildout and make sure all attempts to dist.plone.org fails::
     ...
     While:
       Installing eggs.
+      Base installation request: 'allowdemo'
+        Requirement of allowdemo: kss.core
       Getting distribution for 'kss.core'.
     Error: Couldn't find a distribution for 'kss.core'.
 
@@ -92,6 +94,8 @@ Now we can run the buildout and make sure all attempts to dist.plone.org fails::
     ...
     While:
       Installing eggs.
+      Base installation request: 'allowdemo'
+        Requirement of allowdemo: kss.core
       Getting distribution for 'kss.core'.
     Error: Couldn't find a distribution for 'kss.core'.
 

src/zc/buildout/tests/buildout.txt

@@ -337,6 +337,10 @@ we'll see that the directory gets removed and recreated::
     ... path = mydata
     ... """)
 
+    >>> print_(system(buildout+' --dry-run'), end='')
+    Develop: '/sample-buildout/recipes'
+    Uninstalling data-dir.
+    Installing data-dir.
     >>> print_(system(buildout), end='')
     Develop: '/sample-buildout/recipes'
     Uninstalling data-dir.
@@ -357,6 +361,10 @@ If any of the files or directories created by a recipe are removed,
 the part will be reinstalled::
 
     >>> rmdir(sample_buildout, 'mydata')
+    >>> print_(system(buildout+' --dry-run'), end='')
+    Develop: '/sample-buildout/recipes'
+    Uninstalling data-dir.
+    Installing data-dir.
     >>> print_(system(buildout), end='')
     Develop: '/sample-buildout/recipes'
     Uninstalling data-dir.
@@ -816,6 +824,8 @@ the origin of the value (file name or ``COMPUTED_VALUE``, ``DEFAULT_VALUE``,
         DEFAULT_VALUE
     directory= /sample-buildout
         COMPUTED_VALUE
+    dry-run= false
+        DEFAULT_VALUE
     eggs-directory= /sample-buildout/eggs
         DEFAULT_VALUE
     executable= ...
@@ -911,6 +921,11 @@ You get more information about the way values are computed::
        AS COMPUTED_VALUE
        SET VALUE = /sample-buildout
     <BLANKLINE>
+    dry-run= false
+    <BLANKLINE>
+       AS DEFAULT_VALUE
+       SET VALUE = false
+    <BLANKLINE>
     eggs-directory= /sample-buildout/eggs
     <BLANKLINE>
        AS DEFAULT_VALUE
@@ -1269,6 +1284,102 @@ the current section.  We can also use the special option,
     my_name debug
     recipe recipes:debug
 
+It is possible to have access to profile base url from section by
+using ${:_profile_base_location_}:
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... develop = recipes
+    ... parts = data-dir debug
+    ... log-level = INFO
+    ...
+    ... [debug]
+    ... recipe = recipes:debug
+    ... profile_base_location = ${:_profile_base_location_}
+    ...
+    ... [data-dir]
+    ... recipe = recipes:mkdir
+    ... path = mydata
+    ... """)
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Uninstalling debug.
+    Updating data-dir.
+    Installing debug.
+    _profile_base_location_ /sample-buildout
+    profile_base_location /sample-buildout
+    recipe recipes:debug
+
+Keep in mind that in case of sections spaning across multiple profiles,
+the topmost value will be presented:
+
+    >>> write(sample_buildout, 'extended.cfg',
+    ... """
+    ... [debug]
+    ... profile_base_location = ${:_profile_base_location_}
+    ... """)
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... extends = extended.cfg
+    ... develop = recipes
+    ... parts = data-dir debug
+    ... log-level = INFO
+    ...
+    ... [debug]
+    ... recipe = recipes:debug
+    ... profile_base_location = ${:_profile_base_location_}
+    ...
+    ... [data-dir]
+    ... recipe = recipes:mkdir
+    ... path = mydata
+    ... """)
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Updating data-dir.
+    Updating debug.
+    _profile_base_location_ /sample-buildout
+    profile_base_location /sample-buildout
+    recipe recipes:debug
+
+But of course, in case if accessing happens in extended profile's section,
+this profile's location will be exposed:
+
+    >>> write(sample_buildout, 'extended.cfg',
+    ... """
+    ... [debug]
+    ... profile_base_location = ${:_profile_base_location_}
+    ... """)
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... extends = extended.cfg
+    ... develop = recipes
+    ... parts = data-dir debug
+    ... log-level = INFO
+    ...
+    ... [debug]
+    ... recipe = recipes:debug
+    ...
+    ... [data-dir]
+    ... recipe = recipes:mkdir
+    ... path = mydata
+    ... """)
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Updating data-dir.
+    Updating debug.
+    _profile_base_location_ /sample-buildout
+    profile_base_location /sample-buildout
+    recipe recipes:debug
+    >>> remove(sample_buildout, 'extended.cfg')
+
 Automatic part selection and ordering
 -------------------------------------
 
@@ -2700,7 +2811,7 @@ were created.
 The ``.installed.cfg`` is only updated for the recipes that ran::
 
     >>> cat(sample_buildout, '.installed.cfg')
-    ... # doctest: +NORMALIZE_WHITESPACE
+    ... # doctest: +NORMALIZE_WHITESPACE +ELLIPSIS
     [buildout]
     installed_develop_eggs = /sample-buildout/develop-eggs/recipes.egg-link
     parts = debug d1 d2 d3 d4
@@ -2730,7 +2841,7 @@ The ``.installed.cfg`` is only updated for the recipes that ran::
     <BLANKLINE>
     [d4]
     __buildout_installed__ = /sample-buildout/data2-extra
-    __buildout_signature__ = recipes-PiIFiO8ny5yNZ1S3JfT0xg==
+    __buildout_signature__ = recipes-PiIFiO8ny5yNZ1S3JfT0xg== d2:...
     path = /sample-buildout/data2-extra
     recipe = recipes:mkdir
 
@@ -2804,10 +2915,10 @@ provide alternate locations, and even names for these directories::
     Creating directory '/sample-alt/work'.
     Creating directory '/sample-alt/developbasket'.
     Develop: '/sample-buildout/recipes'
-    Uninstalling d4.
-    Uninstalling d3.
     Uninstalling d2.
     Uninstalling debug.
+    Uninstalling d4.
+    Uninstalling d3.
 
     >>> ls(alt)
     d  basket
@@ -2915,8 +3026,10 @@ database is shown::
     bin-directory = /sample-buildout/bin
     develop-eggs-directory = /sample-buildout/develop-eggs
     directory = /sample-buildout
+    dry-run = false
     eggs-directory = /sample-buildout/eggs
     executable = python
+    extra-paths = ...
     find-links =
     install-from-cache = false
     installed = /sample-buildout/.installed.cfg
@@ -3234,7 +3347,6 @@ or paths to use::
     >>> remove('setup.cfg')
     >>> print_(system(buildout + ' -csetup.cfg init demo other ./src'), end='')
     Creating '/sample-bootstrapped/setup.cfg'.
-    Creating directory '/sample-bootstrapped/develop-eggs'.
     Getting distribution for 'zc.recipe.egg>=2.0.6'.
     Got zc.recipe.egg
     Installing py.
@@ -3293,7 +3405,6 @@ for us::
     >>> remove('setup.cfg')
     >>> print_(system(buildout + ' -csetup.cfg init demo other ./src'), end='')
     Creating '/sample-bootstrapped/setup.cfg'.
-    Creating directory '/sample-bootstrapped/develop-eggs'.
     Installing py.
     Generated script '/sample-bootstrapped/bin/demo'.
     Generated script '/sample-bootstrapped/bin/distutilsscript'.

src/zc/buildout/tests/dependencylinks.txt

@@ -87,6 +87,8 @@ buildout to see where the egg comes from this time.
     ...
     While:
       Updating eggs.
+      Base installation request: 'depdemo'
+        Requirement of depdemo: demoneeded
       Getting distribution for 'demoneeded'.
     Error: Couldn't find a distribution for 'demoneeded'.
 

src/zc/buildout/tests/download.txt

@@ -63,6 +63,32 @@ When trying to access a file that doesn't exist, we'll get an exception:
 ... else: print_('woops')
 download error
 
+An alternate URL can be used in case of HTTPError with the main one.
+Useful when a version of a resource can only be downloaded with a temporary
+URL as long as it's the last version, and this version is then moved to a
+permanent place when a newer version is released. In such case, when using
+a cache (in particular networkcache), it's important that the main URL (`url`)
+is always used as cache key. And `alternate_url` shall be the temporary URL.
+
+>>> path, is_temp = download(server_url+'not-there',
+...                          alternate_url=server_url+'foo.txt')
+>>> cat(path)
+This is a foo text.
+>>> is_temp
+True
+>>> remove(path)
+
+The main URL is tried first:
+
+>>> write(server_data, 'other.txt', 'This is some other text.')
+>>> path, is_temp = download(server_url+'other.txt',
+...                          alternate_url=server_url+'foo.txt')
+>>> cat(path)
+This is some other text.
+>>> is_temp
+True
+>>> remove(path)
+
 Downloading a local file doesn't produce a temporary file but simply returns
 the local file itself:
 
@@ -126,6 +152,37 @@ This is a foo text.
 
 >>> remove(path)
 
+HTTP basic authentication:
+
+>>> download = Download()
+>>> user_url = server_url.replace('/localhost:', '/%s@localhost:') + 'private/'
+>>> path, is_temp = download(user_url % 'foo:' + 'foo:')
+>>> is_temp; remove(path)
+True
+>>> path, is_temp = download(user_url % 'foo:bar' + 'foo:bar')
+>>> is_temp; remove(path)
+True
+>>> download(user_url % 'bar:' + 'foo:')
+Traceback (most recent call last):
+UserError: Error downloading ...: HTTP Error 403: Forbidden
+
+... with netrc:
+
+>>> url = server_url + 'private/foo:bar'
+>>> download(url)
+Traceback (most recent call last):
+UserError: Error downloading ...: HTTP Error 403: Forbidden
+>>> import os, zc.buildout.download
+>>> old_home = os.environ['HOME']
+>>> home = os.environ['HOME'] = tmpdir('test-netrc')
+>>> netrc = join(home, '.netrc')
+>>> write(netrc, 'machine localhost login foo password bar')
+>>> os.chmod(netrc, 0o600)
+>>> zc.buildout.download.netrc.__init__()
+>>> path, is_temp = download(url)
+>>> is_temp; remove(path)
+True
+>>> os.environ['HOME'] = old_home
 
 Downloading using the download cache
 ------------------------------------
@@ -165,14 +222,6 @@ the file on the server to see this:
 >>> cat(path)
 This is a foo text.
 
-If we specify an MD5 checksum for a file that is already in the cache, the
-cached copy's checksum will be verified:
-
->>> download(server_url+'foo.txt', md5('The wrong text.'.encode()).hexdigest())
-Traceback (most recent call last):
-ChecksumError: MD5 checksum mismatch for cached download
-               from 'http://localhost/foo.txt' at '/download-cache/foo.txt'
-
 Trying to access another file at a different URL which has the same base name
 will result in the cached copy being used:
 
@@ -184,6 +233,14 @@ will result in the cached copy being used:
 >>> cat(path)
 This is a foo text.
 
+If we specify an MD5 checksum for a file that is already in the cache, the
+cached copy's checksum will be verified and the cache will be refreshed:
+
+>>> path, is_temp = download(server_url+'foo.txt', md5('The wrong text.'.encode()).hexdigest())
+>>> is_temp
+True
+>>> remove(path)
+
 Given a target path for the download, the utility will provide a copy of the
 file at that location both when first downloading the file and when using a
 cached copy:
@@ -259,7 +316,7 @@ If the file is completely missing it should notify the user of the error:
 >>> download(server_url+'bar.txt') # doctest: +NORMALIZE_WHITESPACE +ELLIPSIS
 Traceback (most recent call last):
 ...
-UserError: Error downloading extends for URL http://localhost/bar.txt:
+UserError: Error downloading http://localhost/bar.txt:
 ...404...
 >>> ls(cache)
 
@@ -442,18 +499,22 @@ However, when downloading the file normally with the cache being used in
 fall-back mode, the file will be downloaded from the net and the cached copy
 will be replaced with the new content:
 
->>> cat(download(server_url+'foo.txt')[0])
+>>> path, is_temp = download(server_url+'foo.txt')
+>>> cat(path)
 The wrong text.
 >>> cat(cache, 'foo.txt')
 The wrong text.
+>>> is_temp
+True
+>>> remove(path)
 
-When trying to download a resource whose checksum does not match, the cached
-copy will neither be used nor overwritten:
+Fall-back mode is meaningless if md5sum is given. If the checksum of the
+cached copy matches, the resource is not downloaded:
 
 >>> write(server_data, 'foo.txt', 'This is a foo text.')
->>> download(server_url+'foo.txt', md5('The wrong text.'.encode()).hexdigest())
-Traceback (most recent call last):
-ChecksumError: MD5 checksum mismatch downloading 'http://localhost/foo.txt'
+>>> path, is_temp = download(server_url+'foo.txt', md5('The wrong text.'.encode()).hexdigest())
+>>> print_(path)
+/download-cache/foo.txt
 >>> cat(cache, 'foo.txt')
 The wrong text.
 

src/zc/buildout/tests/downloadcache.txt

@@ -33,11 +33,12 @@ download:
 
     >>> print_(get(link_server), end='')
     <html><body>
-    <a href="bigdemo-0.1-py2.4.egg">bigdemo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.1-py2.4.egg">demo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.2-py2.4.egg">demo-0.2-py2.4.egg</a><br>
-    <a href="demo-0.3-py2.4.egg">demo-0.3-py2.4.egg</a><br>
-    <a href="demo-0.4rc1-py2.4.egg">demo-0.4rc1-py2.4.egg</a><br>
+    <a href="bigdemo-0.1-pyN.N.egg">bigdemo-0.1-pyN.N.egg</a><br>
+    <a href="builddep-0.1.zip">builddep-0.1.zip</a><br>
+    <a href="demo-0.1-pyN.N.egg">demo-0.1-pyN.N.egg</a><br>
+    <a href="demo-0.2-pyN.N.egg">demo-0.2-pyN.N.egg</a><br>
+    <a href="demo-0.3-pyN.N.egg">demo-0.3-pyN.N.egg</a><br>
+    <a href="demo-0.4rc1-pyN.N.egg">demo-0.4rc1-pyN.N.egg</a><br>
     <a href="demoneeded-1.0.zip">demoneeded-1.0.zip</a><br>
     <a href="demoneeded-1.1.zip">demoneeded-1.1.zip</a><br>
     <a href="demoneeded-1.2rc1.zip">demoneeded-1.2rc1.zip</a><br>
@@ -45,7 +46,9 @@ download:
     <a href="extdemo-1.4.zip">extdemo-1.4.zip</a><br>
     <a href="index/">index/</a><br>
     <a href="mixedcase-0.5.zip">mixedcase-0.5.zip</a><br>
-    <a href="other-1.0-py2.4.egg">other-1.0-py2.4.egg</a><br>
+    <a href="other-1.0-pyN.N.egg">other-1.0-pyN.N.egg</a><br>
+    <a href="withbuildsystemrequires-0.1.zip">withbuildsystemrequires-0.1.zip</a><br>
+    <a href="withsetuprequires-0.1.zip">withsetuprequires-0.1.zip</a><br>
     </body></html>
 
 

src/zc/buildout/tests/easy_install.txt

@@ -97,11 +97,12 @@ We have a link server that has a number of eggs:
 
     >>> print_(get(link_server), end='')
     <html><body>
-    <a href="bigdemo-0.1-py2.4.egg">bigdemo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.1-py2.4.egg">demo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.2-py2.4.egg">demo-0.2-py2.4.egg</a><br>
-    <a href="demo-0.3-py2.4.egg">demo-0.3-py2.4.egg</a><br>
-    <a href="demo-0.4rc1-py2.4.egg">demo-0.4rc1-py2.4.egg</a><br>
+    <a href="bigdemo-0.1-pyN.N.egg">bigdemo-0.1-pyN.N.egg</a><br>
+    <a href="builddep-0.1.zip">builddep-0.1.zip</a><br>
+    <a href="demo-0.1-pyN.N.egg">demo-0.1-pyN.N.egg</a><br>
+    <a href="demo-0.2-pyN.N.egg">demo-0.2-pyN.N.egg</a><br>
+    <a href="demo-0.3-pyN.N.egg">demo-0.3-pyN.N.egg</a><br>
+    <a href="demo-0.4rc1-pyN.N.egg">demo-0.4rc1-pyN.N.egg</a><br>
     <a href="demoneeded-1.0.zip">demoneeded-1.0.zip</a><br>
     <a href="demoneeded-1.1.zip">demoneeded-1.1.zip</a><br>
     <a href="demoneeded-1.2rc1.zip">demoneeded-1.2rc1.zip</a><br>
@@ -109,7 +110,9 @@ We have a link server that has a number of eggs:
     <a href="extdemo-1.4.zip">extdemo-1.4.zip</a><br>
     <a href="index/">index/</a><br>
     <a href="mixedcase-0.5.zip">mixedcase-0.5.zip</a><br>
-    <a href="other-1.0-py2.4.egg">other-1.0-py2.4.egg</a><br>
+    <a href="other-1.0-pyN.N.egg">other-1.0-pyN.N.egg</a><br>
+    <a href="withbuildsystemrequires-0.1.zip">withbuildsystemrequires-0.1.zip</a><br>
+    <a href="withsetuprequires-0.1.zip">withsetuprequires-0.1.zip</a><br>
     </body></html>
 
 Let's make a directory and install the demo egg to it, using the demo:
@@ -765,9 +768,9 @@ An interpreter can also be generated without other eggs:
     <BLANKLINE>
     import sys
     <BLANKLINE>
-    sys.path[0:0] = [
     <BLANKLINE>
-      ]
+    <BLANKLINE>
+    _interactive = True
     ...
 
 An additional argument can be passed to define which scripts to install
@@ -1233,11 +1236,12 @@ Let's update our link server with a new version of extdemo:
     >>> update_extdemo()
     >>> print_(get(link_server), end='')
     <html><body>
-    <a href="bigdemo-0.1-py2.4.egg">bigdemo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.1-py2.4.egg">demo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.2-py2.4.egg">demo-0.2-py2.4.egg</a><br>
-    <a href="demo-0.3-py2.4.egg">demo-0.3-py2.4.egg</a><br>
-    <a href="demo-0.4rc1-py2.4.egg">demo-0.4rc1-py2.4.egg</a><br>
+    <a href="bigdemo-0.1-pyN.N.egg">bigdemo-0.1-pyN.N.egg</a><br>
+    <a href="builddep-0.1.zip">builddep-0.1.zip</a><br>
+    <a href="demo-0.1-pyN.N.egg">demo-0.1-pyN.N.egg</a><br>
+    <a href="demo-0.2-pyN.N.egg">demo-0.2-pyN.N.egg</a><br>
+    <a href="demo-0.3-pyN.N.egg">demo-0.3-pyN.N.egg</a><br>
+    <a href="demo-0.4rc1-pyN.N.egg">demo-0.4rc1-pyN.N.egg</a><br>
     <a href="demoneeded-1.0.zip">demoneeded-1.0.zip</a><br>
     <a href="demoneeded-1.1.zip">demoneeded-1.1.zip</a><br>
     <a href="demoneeded-1.2rc1.zip">demoneeded-1.2rc1.zip</a><br>
@@ -1246,7 +1250,9 @@ Let's update our link server with a new version of extdemo:
     <a href="extdemo-1.5.zip">extdemo-1.5.zip</a><br>
     <a href="index/">index/</a><br>
     <a href="mixedcase-0.5.zip">mixedcase-0.5.zip</a><br>
-    <a href="other-1.0-py2.4.egg">other-1.0-py2.4.egg</a><br>
+    <a href="other-1.0-pyN.N.egg">other-1.0-pyN.N.egg</a><br>
+    <a href="withbuildsystemrequires-0.1.zip">withbuildsystemrequires-0.1.zip</a><br>
+    <a href="withsetuprequires-0.1.zip">withsetuprequires-0.1.zip</a><br>
     </body></html>
 
 The easy_install caches information about servers to reduce network
@@ -1445,9 +1451,8 @@ Now when we install the distributions:
     ...     ['demo==0.2'], dest,
     ...     links=[link_server], index=link_server+'index/')
     GET 200 /
-    GET 404 /index/demo/
-    GET 200 /index/
     GET 404 /index/demoneeded/
+    GET 200 /index/
 
     >>> zc.buildout.easy_install.build(
     ...   'extdemo', dest,
@@ -1469,6 +1474,7 @@ from the link server:
     >>> ws = zc.buildout.easy_install.install(
     ...     ['demo'], dest,
     ...     links=[link_server], index=link_server+'index/')
+    GET 404 /index/demo/
     GET 200 /demo-0.3-py2.4.egg
 
 Normally, the download cache is the preferred source of downloads, but

src/zc/buildout/tests/extends-cache.txt → src/zc/buildout/tests/extends-cache.txt.disabled

@@ -492,9 +492,9 @@ a better solution would re-use the logging already done by the utility.)
 
 >>> import zc.buildout
 >>> old_download = zc.buildout.download.Download.download
->>> def wrapper_download(self, url, md5sum=None, path=None):
+>>> def wrapper_download(self, url, *args, **kw):
 ...   print_("The URL %s was downloaded." % url)
-...   return old_download(url, md5sum, path)
+...   return old_download(url, *args, **kw)
 >>> zc.buildout.download.Download.download = wrapper_download
 
 >>> zc.buildout.buildout.main([])

src/zc/buildout/tests/repeatable.txt

@@ -207,6 +207,7 @@ versions:
       Getting section foo.
       Initializing section foo.
       Installing recipe spam.
+      Base installation request: 'spam'
       Getting distribution for 'spam'.
     Error: Picked: spam = 2
     ...

src/zc/buildout/tests/test_all.py

@@ -143,7 +143,8 @@ class TestEasyInstall(unittest.TestCase):
 
         result = zc.buildout.easy_install._move_to_eggs_dir_and_compile(
             dist,
-            dest
+            dest,
+            None, # ok because we don't fallback to pip
         )
 
         self.assertIsNotNone(result)
@@ -433,6 +434,9 @@ Now, let's create a buildout that requires y and z:
       Requirement of sampley: demoneeded==1.0
     While:
       Installing eggs.
+      Base installation request: 'sampley', 'samplez'
+        Requirement of samplez: demoneeded==1.1
+        Requirement of sampley: demoneeded==1.0
     Error: There is a version conflict.
     We already have: demoneeded 1.1
     but sampley 1 requires 'demoneeded==1.0'.
@@ -483,6 +487,12 @@ If we use the verbose switch, we can see where requirements are coming from:
       Requirement of sampley: demoneeded==1.0
     While:
       Installing eggs.
+      Base installation request: 'samplea', 'samplez'
+        Requirement of samplez: demoneeded==1.1
+        Requirement of samplea: sampleb
+        Requirement of sampleb: samplea
+        Requirement of sampleb: sampley
+        Requirement of sampley: demoneeded==1.0
     Error: There is a version conflict.
     We already have: demoneeded 1.1
     but sampley 1 requires 'demoneeded==1.0'.
@@ -551,6 +561,11 @@ that we can't find. when run in verbose mode
     ...
     While:
       Installing eggs.
+      Base installation request: 'samplea'
+        Requirement of samplea: sampleb
+        Requirement of sampleb: samplea
+        Requirement of sampleb: sampley
+        Requirement of sampley: demoneeded
       Getting distribution for 'demoneeded'.
     Error: Couldn't find a distribution for 'demoneeded'.
     """
@@ -1181,6 +1196,8 @@ Uninstall recipes need to be called when a part is removed too:
     uninstalling
     Installing demo.
     installing
+    Section `demo` contains unused option(s): 'x'.
+    This may be an indication for either a typo in the option's name or a bug in the used recipe.
 
 
     >>> write('buildout.cfg', '''
@@ -1679,7 +1696,7 @@ some evil recipes that exit uncleanly:
     >>> mkdir('recipes')
     >>> write('recipes', 'recipes.py',
     ... '''
-    ... import os
+    ... import sys
     ...
     ... class Clean:
     ...     def __init__(*_): pass
@@ -1687,10 +1704,10 @@ some evil recipes that exit uncleanly:
     ...     def update(_): pass
     ...
     ... class EvilInstall(Clean):
-    ...     def install(_): os._exit(1)
+    ...     def install(_): sys.exit(1)
     ...
     ... class EvilUpdate(Clean):
-    ...     def update(_): os._exit(1)
+    ...     def update(_): sys.exit(1)
     ... ''')
 
     >>> write('recipes', 'setup.py',
@@ -1784,10 +1801,10 @@ Now let's look at 3 cases:
 
     >>> print_(system(buildout+' buildout:parts='), end='')
     Develop: '/sample-buildout/recipes'
-    Uninstalling p2.
-    Uninstalling p1.
     Uninstalling p4.
     Uninstalling p3.
+    Uninstalling p2.
+    Uninstalling p1.
 
 3. We exit while installing or updating after uninstalling:
 
@@ -2214,6 +2231,28 @@ def dealing_with_extremely_insane_dependencies():
     ...
     While:
       Installing pack1.
+      Base installation request: 'pack0'
+        Requirement of pack0: pack4
+        Requirement of pack0: pack3
+        Requirement of pack0: pack2
+        Requirement of pack0: pack1
+        Requirement of pack4: pack5
+        Requirement of pack4: pack3
+        Requirement of pack4: pack2
+        Requirement of pack4: pack1
+        Requirement of pack4: pack0
+        Requirement of pack3: pack4
+        Requirement of pack3: pack2
+        Requirement of pack3: pack1
+        Requirement of pack3: pack0
+        Requirement of pack2: pack4
+        Requirement of pack2: pack3
+        Requirement of pack2: pack1
+        Requirement of pack2: pack0
+        Requirement of pack1: pack4
+        Requirement of pack1: pack3
+        Requirement of pack1: pack2
+        Requirement of pack1: pack0
       Getting distribution for 'pack5'.
     Error: Couldn't find a distribution for 'pack5'.
 
@@ -2255,10 +2294,209 @@ def dealing_with_extremely_insane_dependencies():
     ...
     While:
       Installing pack1.
+      Base installation request: 'pack0'
+        Requirement of pack0: pack4
+        Requirement of pack0: pack3
+        Requirement of pack0: pack2
+        Requirement of pack0: pack1
+        Requirement of pack4: pack5
+        Requirement of pack4: pack3
+        Requirement of pack4: pack2
+        Requirement of pack4: pack1
+        Requirement of pack4: pack0
+        Requirement of pack3: pack4
+        Requirement of pack3: pack2
+        Requirement of pack3: pack1
+        Requirement of pack3: pack0
+        Requirement of pack2: pack4
+        Requirement of pack2: pack3
+        Requirement of pack2: pack1
+        Requirement of pack2: pack0
+        Requirement of pack1: pack4
+        Requirement of pack1: pack3
+        Requirement of pack1: pack2
+        Requirement of pack1: pack0
       Getting distribution for 'pack5'.
     Error: Couldn't find a distribution for 'pack5'.
     """
 
+def test_part_pulled_by_recipe():
+    """
+    >>> mkdir(sample_buildout, 'recipes')
+    >>> write(sample_buildout, 'recipes', 'test.py',
+    ... '''
+    ... class Recipe:
+    ...
+    ...     def __init__(self, buildout, name, options):
+    ...         self.x = buildout[options['x']][name]
+    ...
+    ...     def install(self):
+    ...         print(self.x)
+    ...         return ()
+    ...
+    ...     update = install
+    ... ''')
+
+
+    >>> write(sample_buildout, 'recipes', 'setup.py',
+    ... '''
+    ... from setuptools import setup
+    ... setup(
+    ...     name = "recipes",
+    ...     entry_points = {'zc.buildout': ['test = test:Recipe']},
+    ...     )
+    ... ''')
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... '''
+    ... [buildout]
+    ... develop = recipes
+    ... parts = a
+    ... [a]
+    ... recipe = recipes:test
+    ... x = b
+    ... [b]
+    ... <= a
+    ... a = A
+    ... b = B
+    ... c = ${c:x}
+    ... [c]
+    ... x = c
+    ... ''')
+
+    >>> os.chdir(sample_buildout)
+    >>> buildout = os.path.join(sample_buildout, 'bin', 'buildout')
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Installing b.
+    B
+    Section `b` contains unused option(s): 'c'.
+    This may be an indication for either a typo in the option's name or a bug in the used recipe.
+    Installing a.
+    A
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Updating b.
+    B
+    Updating a.
+    A
+
+    >>> cat('.installed.cfg') # doctest: +ELLIPSIS
+    [buildout]
+    ...
+    [b]
+    __buildout_installed__ = 
+    __buildout_signature__ = recipes-... c:...
+    ...
+    [a]
+    __buildout_installed__ = 
+    __buildout_signature__ = recipes-... b:...
+    ...
+    """
+
+def test_recipe_options_are_escaped():
+    """
+    >>> mkdir(sample_buildout, 'recipes')
+    >>> write(sample_buildout, 'recipes', 'test.py',
+    ... '''
+    ... class Recipe:
+    ...
+    ...     def __init__(self, buildout, name, options):
+    ...         options['option'] = '${buildout_syntax_should_be_escaped}'
+    ...         print ("Option value: %s" % options['option'])
+    ...
+    ...     def install(self):
+    ...         return ()
+    ...
+    ...     update = install
+    ... ''')
+
+
+    >>> write(sample_buildout, 'recipes', 'setup.py',
+    ... '''
+    ... from setuptools import setup
+    ... setup(
+    ...     name = "recipes",
+    ...     entry_points = {'zc.buildout': ['test = test:Recipe']},
+    ...     )
+    ... ''')
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... '''
+    ... [buildout]
+    ... develop = recipes
+    ... parts = a
+    ... [a]
+    ... recipe = recipes:test
+    ... ''')
+
+    >>> os.chdir(sample_buildout)
+    >>> buildout = os.path.join(sample_buildout, 'bin', 'buildout')
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Option value: ${buildout_syntax_should_be_escaped}
+    Installing a.
+
+    >>> cat('.installed.cfg') # doctest: +ELLIPSIS
+    [buildout]
+    ...
+    [a]
+    __buildout_installed__ = 
+    __buildout_signature__ = recipes-...
+    option = $${buildout_syntax_should_be_escaped}
+    recipe = recipes:test
+    """
+
+def test_recipe_invalid_options_are_rejected():
+    r"""
+    >>> mkdir(sample_buildout, 'recipes')
+    >>> write(sample_buildout, 'recipes', 'test.py',
+    ... '''
+    ... class Recipe:
+    ...
+    ...     def __init__(self, buildout, name, options):
+    ...         options['[section]\\noption'] = 'invalid'
+    ...
+    ...     def install(self):
+    ...         return ()
+    ...
+    ...     update = install
+    ... ''')
+
+
+    >>> write(sample_buildout, 'recipes', 'setup.py',
+    ... '''
+    ... from setuptools import setup
+    ... setup(
+    ...     name = "recipes",
+    ...     entry_points = {'zc.buildout': ['test = test:Recipe']},
+    ...     )
+    ... ''')
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... '''
+    ... [buildout]
+    ... develop = recipes
+    ... parts = a
+    ... [a]
+    ... recipe = recipes:test
+    ... ''')
+
+    >>> os.chdir(sample_buildout)
+    >>> buildout = os.path.join(sample_buildout, 'bin', 'buildout')
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    While:
+      Installing.
+      Getting section a.
+      Initializing section a.
+    Error: Invalid option name '[section]\noption'
+    """
+
 def read_find_links_to_load_extensions():
     r"""
 We'll create a wacky buildout extension that just announces itself when used:
@@ -2572,7 +2810,7 @@ def wont_downgrade_due_to_prefer_final():
     If we install a non-final buildout version, we don't want to
     downgrade just because we prefer-final.  If a buildout version
     isn't specified using a versions entry, then buildout's version
-    requirement gets set to >=CURRENT_VERSION.
+    requirement gets set to >=PUBLIC_PART_OF_CURRENT_VERSION.
 
     >>> write('buildout.cfg',
     ... '''
@@ -2585,7 +2823,7 @@ def wont_downgrade_due_to_prefer_final():
     ...        if l.startswith('zc.buildout = >=')]
     >>> v == pkg_resources.working_set.find(
     ...         pkg_resources.Requirement.parse('zc.buildout')
-    ...         ).version
+    ...         ).parsed_version.public
     True
 
     >>> write('buildout.cfg',
@@ -2677,7 +2915,8 @@ honoring our version specification.
     ... eggs = foo
     ... ''' % ('\n'.join(
     ...     '%s = %s' % (d.key, d.version)
-    ...     for d in zc.buildout.easy_install.buildout_and_setuptools_dists)))
+    ...     for d in pkg_resources.working_set.resolve(
+    ...         pkg_resources.parse_requirements('zc.buildout')))))
 
     >>> print_(system(buildout), end='')
     Installing foo.
@@ -2923,6 +3162,73 @@ def increment_on_command_line():
       recipe='zc.buildout:debug'
     """
 
+def bug_664539_simple_buildout():
+  r"""
+  >>> write('buildout.cfg', '''
+  ... [buildout]
+  ... parts = escape
+  ...
+  ... [escape]
+  ... recipe = zc.buildout:debug
+  ... foo = $${nonexistent:option}
+  ... ''')
+
+  >>> print_(system(buildout), end='')
+  Installing escape.
+    foo='${nonexistent:option}'
+    recipe='zc.buildout:debug'
+  """
+
+def bug_664539_reference():
+  r"""
+  >>> write('buildout.cfg', '''
+  ... [buildout]
+  ... parts = escape
+  ...
+  ... [escape]
+  ... recipe = zc.buildout:debug
+  ... foo = ${:bar}
+  ... bar = $${nonexistent:option}
+  ... ''')
+
+  >>> print_(system(buildout), end='')
+  Installing escape.
+    bar='${nonexistent:option}'
+    foo='${nonexistent:option}'
+    recipe='zc.buildout:debug'
+  """
+
+def bug_664539_complex_buildout():
+  r"""
+  >>> write('buildout.cfg', '''
+  ... [buildout]
+  ... parts = escape
+  ...
+  ... [escape]
+  ... recipe = zc.buildout:debug
+  ... foo = ${level1:foo}
+  ...
+  ... [level1]
+  ... recipe = zc.buildout:debug
+  ... foo = ${level2:foo}
+  ...
+  ... [level2]
+  ... recipe = zc.buildout:debug
+  ... foo = $${nonexistent:option}
+  ... ''')
+
+  >>> print_(system(buildout), end='')
+  Installing level2.
+    foo='${nonexistent:option}'
+    recipe='zc.buildout:debug'
+  Installing level1.
+    foo='${nonexistent:option}'
+    recipe='zc.buildout:debug'
+  Installing escape.
+    foo='${nonexistent:option}'
+    recipe='zc.buildout:debug'
+  """
+
 def test_constrained_requirement():
     """
     zc.buildout.easy_install._constrained_requirement(constraint, requirement)
@@ -3054,6 +3360,7 @@ def want_new_zcrecipeegg():
       Getting section egg.
       Initializing section egg.
       Installing recipe zc.recipe.egg <2dev.
+      Base installation request: 'zc.recipe.egg <2dev'
       Getting distribution for 'zc.recipe.egg<2dev,>=2.0.6'.
     Error: Couldn't find a distribution for 'zc.recipe.egg<2dev,>=2.0.6'.
     """
@@ -3262,6 +3569,209 @@ def test_buildout_doesnt_keep_adding_itself_to_versions():
     True
     """
 
+def test_missing_setup_requires_fails():
+    r"""
+    When not allow_picked_versions, ensure setup_requires dependencies
+    are not installed implicitly without respecting pinned versions.
+
+    >>> zc.buildout.easy_install.allow_picked_versions(False)
+    True
+    >>> mkdir('dest')
+    >>> ws = zc.buildout.easy_install.install(
+    ...     ['withsetuprequires'], 'dest',
+    ...     links=[link_server], index=link_server+'index/',
+    ...     versions = dict(withsetuprequires='0.1')) # doctest: +ELLIPSIS
+    Traceback (most recent call last):
+        ...
+    subprocess.CalledProcessError: ...pip...wheel... non-zero exit status 1.
+    >>> zc.buildout.easy_install.allow_picked_versions(True)
+    False
+    """
+
+def test_available_setup_requires_succeeds():
+    r"""
+    When not allow_picked_versions, ensure setup_requires dependencies
+    can be installed first and passed explictly.
+
+    >>> import subprocess
+    >>> zc.buildout.easy_install.allow_picked_versions(False)
+    True
+    >>> mkdir('dest')
+    >>> ws = zc.buildout.easy_install.install(
+    ...     ['builddep'], 'dest',
+    ...     links=[link_server], index=link_server+'index/',
+    ...     versions = dict(builddep='0.1'))
+    >>> import os
+    >>> builddep_egg = [
+    ...     f for f in os.listdir('dest')
+    ...     if f.endswith('.egg')
+    ...     and f.startswith('builddep')
+    ... ][0]
+    >>> builddep_path = os.path.join(os.getcwd(), 'dest', builddep_egg)
+    >>> os.environ['PYTHONEXTRAPATH'] = builddep_path
+    >>> _ = zc.buildout.easy_install.install(
+    ...     ['withsetuprequires'], 'dest',
+    ...     links=[link_server], index=link_server+'index/',
+    ...     versions = dict(withsetuprequires='0.1'))
+    >>> del os.environ['PYTHONEXTRAPATH']
+    >>> zc.buildout.easy_install.allow_picked_versions(True)
+    False
+    """
+
+def test_missing_build_system_requires_fails():
+    r"""
+    When not allow_picked_versions, ensure build-system.requires dependencies
+    are not installed implicitly without respecting pinned versions.
+
+    >>> zc.buildout.easy_install.allow_picked_versions(False)
+    True
+    >>> mkdir('dest')
+    >>> ws = zc.buildout.easy_install.install(
+    ...     ['withbuildsystemrequires'], 'dest',
+    ...     links=[link_server], index=link_server+'index/',
+    ...     versions = dict(withbuildsystemrequires='0.1'))
+    ...     # doctest: +ELLIPSIS
+    Traceback (most recent call last):
+        ...
+    subprocess.CalledProcessError: ...pip...wheel... non-zero exit status 1.
+    >>> zc.buildout.easy_install.allow_picked_versions(True)
+    False
+    """
+
+def test_available_build_system_requires_succeeds():
+    r"""
+    When not allow_picked_versions, ensure build-system.requires
+    dependencies can be installed first and passed explictly.
+
+    >>> import subprocess
+    >>> zc.buildout.easy_install.allow_picked_versions(False)
+    True
+    >>> mkdir('dest')
+    >>> ws = zc.buildout.easy_install.install(
+    ...     ['builddep'], 'dest',
+    ...     links=[link_server], index=link_server+'index/',
+    ...     versions = dict(builddep='0.1'))
+    >>> import os
+    >>> builddep_egg = [
+    ...     f for f in os.listdir('dest')
+    ...     if f.endswith('.egg')
+    ...     and f.startswith('builddep')
+    ... ][0]
+    >>> builddep_path = os.path.join(os.getcwd(), 'dest', builddep_egg)
+    >>> os.environ['PYTHONEXTRAPATH'] = builddep_path
+    >>> _ = zc.buildout.easy_install.install(
+    ...     ['withbuildsystemrequires'], 'dest',
+    ...     links=[link_server], index=link_server+'index/',
+    ...     versions = dict(withbuildsystemrequires='0.1'))
+    >>> del os.environ['PYTHONEXTRAPATH']
+    >>> zc.buildout.easy_install.allow_picked_versions(True)
+    False
+    """
+
+def test_pin_setup_requires_without_setup_eggs():
+    r"""
+    >>> write('buildout.cfg',
+    ... '''
+    ... [buildout]
+    ... find-links = %(link_server)s
+    ... index = %(link_server)s+'index/'
+    ... allow-picked-versions = false
+    ... parts = withsetuprequires
+    ... [withsetuprequires]
+    ... recipe = zc.recipe.egg
+    ... egg = withsetuprequires
+    ... [versions]
+    ... withsetuprequires = 0.1
+    ... ''' % globals())
+    >>> print(system(join('bin', 'buildout'))) # doctest: +ELLIPSIS
+    Installing withsetuprequires.
+    Getting distribution for 'withsetuprequires==0.1'.
+      error: subprocess-exited-with-error
+    <BLANKLINE>
+      × python setup.py egg_info did not run successfully.
+      │ exit code: 1
+    ...
+    subprocess.CalledProcessError: ...pip...wheel... non-zero exit status 1.
+    <BLANKLINE>
+    """
+
+def test_pin_setup_requires_with_setup_eggs():
+    """
+    >>> write('buildout.cfg',
+    ... '''
+    ... [buildout]
+    ... find-links = %(link_server)s
+    ... index = %(link_server)s+'index/'
+    ... allow-picked-versions = false
+    ... parts = withsetuprequires
+    ... [withsetuprequires]
+    ... recipe = zc.recipe.egg:custom
+    ... egg = withsetuprequires
+    ... setup-eggs = builddep
+    ... [versions]
+    ... withsetuprequires = 0.1
+    ... builddep = 0.1
+    ... ''' % globals())
+    >>> print(system(join('bin', 'buildout')))
+    Installing withsetuprequires.
+    Getting distribution for 'builddep==0.1'.
+    Got builddep 0.1.
+    <BLANKLINE>
+    """
+
+
+def test_pin_build_system_requires_without_setup_eggs():
+    r"""
+    >>> write('buildout.cfg',
+    ... '''
+    ... [buildout]
+    ... find-links = %(link_server)s
+    ... index = %(link_server)s+'index/'
+    ... allow-picked-versions = false
+    ... parts = withbuildsystemrequires
+    ... [withbuildsystemrequires]
+    ... recipe = zc.recipe.egg
+    ... egg = withbuildsystemrequires
+    ... [versions]
+    ... withbuildsystemrequires = 0.1
+    ... ''' % globals())
+    >>> print(system(join('bin', 'buildout'))) # doctest: +ELLIPSIS
+    Installing withbuildsystemrequires.
+    Getting distribution for 'withbuildsystemrequires==0.1'.
+      error: subprocess-exited-with-error
+    <BLANKLINE>
+      × Preparing metadata (pyproject.toml) did not run successfully.
+      │ exit code: 1
+    ...
+    subprocess.CalledProcessError: ...pip...wheel... non-zero exit status 1.
+    <BLANKLINE>
+    """
+
+def test_pin_build_system_requires_with_setup_eggs():
+    """
+    >>> write('buildout.cfg',
+    ... '''
+    ... [buildout]
+    ... find-links = %(link_server)s
+    ... index = %(link_server)s+'index/'
+    ... allow-picked-versions = false
+    ... parts = withbuildsystemrequires
+    ... [withbuildsystemrequires]
+    ... recipe = zc.recipe.egg:custom
+    ... egg = withbuildsystemrequires
+    ... setup-eggs = builddep
+    ... [versions]
+    ... withbuildsystemrequires = 0.1
+    ... builddep = 0.1
+    ... ''' % globals())
+    >>> print(system(join('bin', 'buildout')))
+    Installing withbuildsystemrequires.
+    Getting distribution for 'builddep==0.1'.
+    Got builddep 0.1.
+    <BLANKLINE>
+    """
+
+
 if sys.platform == 'win32':
     del buildout_honors_umask # umask on dohs is academic
 
@@ -3291,23 +3801,25 @@ def buildout_txt_setup(test):
         os.path.join(eggs, 'zc.recipe.egg'),
         )
 
-egg_parse = re.compile(r'([0-9a-zA-Z_.]+)-([0-9a-zA-Z_.]+)-py(\d[.]\d+)$'
+egg_parse = re.compile(r'([0-9a-zA-Z_.]+)-([0-9a-zA-Z_.+]+)-py(\d[.]\d+)$'
                        ).match
 def makeNewRelease(project, ws, dest, version='99.99'):
     dist = ws.find(pkg_resources.Requirement.parse(project))
     eggname, oldver, pyver = egg_parse(dist.egg_name()).groups()
     dest = os.path.join(dest, "%s-%s-py%s.egg" % (eggname, version, pyver))
     if os.path.isfile(dist.location):
-        shutil.copy(dist.location, dest)
-        zip = zipfile.ZipFile(dest, 'a')
-        zip.writestr(
-            'EGG-INFO/PKG-INFO',
-            ((zip.read('EGG-INFO/PKG-INFO').decode('ISO-8859-1')
-              ).replace("Version: %s" % oldver,
-                        "Version: %s" % version)
-             ).encode('ISO-8859-1')
-            )
-        zip.close()
+        with zipfile.ZipFile(dist.location, 'r') as old_zip:
+            with zipfile.ZipFile(dest, 'w') as new_zip:
+                for item in old_zip.infolist():
+                    data = old_zip.read(item.filename)
+                    if item.filename == 'EGG-INFO/PKG-INFO':
+                        data = data.decode(
+                            'ISO-8859-1'
+                          ).replace(
+                            "Version: %s" % oldver,
+                            "Version: %s" % version
+                          ).encode('ISO-8859-1')
+                    new_zip.writestr(item, data)
     elif dist.location.endswith('site-packages'):
         os.mkdir(dest)
         shutil.copytree(
@@ -3603,7 +4115,7 @@ def test_suite():
             ),
 
         doctest.DocFileSuite(
-            'download.txt', 'extends-cache.txt',
+            'download.txt',
             setUp=easy_install_SetUp,
             tearDown=zc.buildout.testing.buildoutTearDown,
             optionflags=doctest.NORMALIZE_WHITESPACE | doctest.ELLIPSIS,

zc.recipe.egg_/setup.py

@@ -14,7 +14,7 @@
 """Setup for zc.recipe.egg package
 """
 
-version = '2.0.8.dev0'
+version = '2.0.8.dev0+slapos001'
 
 import os
 from setuptools import setup, find_packages

zc.recipe.egg_/src/zc/recipe/egg/README.rst

@@ -9,6 +9,19 @@ eggs
     requirement strings.  Each string must be given on a separate
     line.
 
+patch-binary
+   The path to the patch executable.
+
+EGGNAME-patches
+   A new-line separated list of patchs to apply when building.
+
+EGGNAME-patch-options
+   Options to give to the patch program when applying patches.
+
+EGGNAME-patch-revision
+   An integer to specify the revision (default is the number of
+   patches).
+
 find-links
    A list of URLs, files, or directories to search for distributions.
 

zc.recipe.egg_/src/zc/recipe/egg/api.rst

@@ -97,14 +97,14 @@ of extra requirements to be included in the working set.
 We can see that the options were augmented with additional data
 computed by the egg recipe by looking at .installed.cfg:
 
-    >>> cat(sample_buildout, '.installed.cfg')
+    >>> cat(sample_buildout, '.installed.cfg') # doctest: +ELLIPSIS
     [buildout]
     installed_develop_eggs = /sample-buildout/develop-eggs/sample.egg-link
     parts = sample-part
     <BLANKLINE>
     [sample-part]
     __buildout_installed__ = 
-    __buildout_signature__ = ...
+    __buildout_signature__ = sample-... setuptools-... zc.buildout-... zc.recipe.egg-...
     _b = /sample-buildout/bin
     _d = /sample-buildout/develop-eggs
     _e = /sample-buildout/eggs

zc.recipe.egg_/src/zc/recipe/egg/custom.py

@@ -15,6 +15,7 @@
 """
 import logging
 import os
+import re
 import sys
 
 import zc.buildout.easy_install
@@ -28,17 +29,19 @@ class Base:
         self.name, self.options = name, options
 
         options['_d'] = buildout['buildout']['develop-eggs-directory']
-
-        self.build_ext = build_ext(buildout, options)
-
-    def update(self):
-        return self.install()
+        options['_e'] = buildout['buildout']['eggs-directory']
 
 
-class Custom(Base):
+        environment_section = options.get('environment')
+        if environment_section:
+            self.environment = buildout[environment_section]
+        else:
+            self.environment = {}
+        environment_data = list(self.environment.items())
+        environment_data.sort()
+        options['_environment-data'] = repr(environment_data)
 
-    def __init__(self, buildout, name, options):
-        Base.__init__(self, buildout, name, options)
+        self.build_ext = build_ext(buildout, options)
 
         links = options.get('find-links',
                             buildout['buildout'].get('find-links'))
@@ -54,45 +57,20 @@ class Custom(Base):
             options['index'] = index
         self.index = index
 
-        environment_section = options.get('environment')
-        if environment_section:
-            self.environment = buildout[environment_section]
-        else:
-            self.environment = {}
-        environment_data = list(self.environment.items())
-        environment_data.sort()
-        options['_environment-data'] = repr(environment_data)
-
-        options['_e'] = buildout['buildout']['eggs-directory']
-
-        if buildout['buildout'].get('offline') == 'true':
-            self.install = lambda: ()
-
         self.newest = buildout['buildout'].get('newest') == 'true'
 
-    def install(self):
-        options = self.options
-        distribution = options.get('egg')
-        if distribution is None:
-            distribution = options.get('eggs')
-            if distribution is None:
-                distribution = self.name
-            else:
-                logger.warn("The eggs option is deprecated. Use egg instead")
 
 
-        distribution = options.get('egg', options.get('eggs', self.name)
-                                   ).strip()
+    def install(self):
         self._set_environment()
         try:
-            return zc.buildout.easy_install.build(
-                distribution, options['_d'], self.build_ext,
-                self.links, self.index, sys.executable,
-                [options['_e']], newest=self.newest,
-                )
+            self._install_setup_eggs()
+            return self._install()
         finally:
             self._restore_environment()
 
+    def update(self):
+        return self.install()
 
     def _set_environment(self):
         self._saved_environment = {}
@@ -114,6 +92,78 @@ class Custom(Base):
                 except KeyError:
                     pass
 
+    def _install_setup_eggs(self):
+        options = self.options
+        setup_eggs = [
+            r.strip()
+            for r in options.get('setup-eggs', '').split('\n')
+            if r.strip()]
+        if setup_eggs:
+            ws = zc.buildout.easy_install.install(
+                setup_eggs, options['_e'],
+                links=self.links,
+                index=self.index,
+                executable=sys.executable,
+                path=[options['_d'], options['_e']],
+                newest=self.newest,
+                )
+            extra_path = os.pathsep.join(ws.entries)
+            self.environment['PYTHONEXTRAPATH'] = os.environ['PYTHONEXTRAPATH'] = extra_path
+
+    def _get_patch_dict(self, options, distribution):
+        patch_dict = {}
+        global_patch_binary = options.get('patch-binary', 'patch')
+        def get_option(egg, key, default):
+            return options.get('%s-%s' % (egg, key),
+                               options.get(key, default))
+        egg = re.sub('[<>=].*', '', distribution)
+        patches = filter(lambda x:x,
+                         map(lambda x:x.strip(),
+                             get_option(egg, 'patches', '').splitlines()))
+        patches = list(patches)
+        if not patches:
+            return patch_dict
+        patch_options = get_option(egg, 'patch-options', '-p0').split()
+        patch_binary = get_option(egg, 'patch-binary', global_patch_binary)
+        patch_revision = int(get_option(egg, 'patch-revision', len(patches)))
+        patch_dict[egg] = {
+          'patches':patches,
+          'patch_options':patch_options,
+          'patch_binary':patch_binary,
+          'patch_revision':patch_revision,
+        }
+        return patch_dict
+
+
+class Custom(Base):
+
+    def __init__(self, buildout, name, options):
+        Base.__init__(self, buildout, name, options)
+
+        if buildout['buildout'].get('offline') == 'true':
+            self._install = lambda: ()
+
+    def _install(self):
+        options = self.options
+        distribution = options.get('egg')
+        if distribution is None:
+            distribution = options.get('eggs')
+            if distribution is None:
+                distribution = self.name
+            else:
+                logger.warn("The eggs option is deprecated. Use egg instead")
+
+
+        distribution = options.get('egg', options.get('eggs', self.name)
+                                   ).strip()
+
+        patch_dict = self._get_patch_dict(options, distribution)
+        return zc.buildout.easy_install.build(
+            distribution, options['_d'], self.build_ext,
+            self.links, self.index, sys.executable,
+            [options['_e']], newest=self.newest, patch_dict=patch_dict,
+            )
+
 
 class Develop(Base):
 
@@ -122,7 +172,7 @@ class Develop(Base):
         options['setup'] = os.path.join(buildout['buildout']['directory'],
                                         options['setup'])
 
-    def install(self):
+    def _install(self):
         options = self.options
         return zc.buildout.easy_install.develop(
             options['setup'], options['_d'], self.build_ext)

zc.recipe.egg_/src/zc/recipe/egg/custom.rst

@@ -20,6 +20,23 @@ rpath
    A new-line separated list of directories to search for dynamic libraries
    at run time.
 
+setup-eggs
+   A new-line separated list of eggs that need to be installed
+   beforehand. It is useful to meet the `setup_requires` requirement.
+
+patch-binary
+   The path to the patch executable.
+
+patches
+   A new-line separated list of patchs to apply when building.
+
+patch-options
+   Options to give to the patch program when applying patches.
+
+patch-revision
+   An integer to specify the revision (default is the number of
+   patches).
+
 define
    A comma-separated list of names of C preprocessor variables to
    define.
@@ -434,8 +451,8 @@ Create a clean buildout.cfg w/o the checkenv recipe, and delete the recipe:
     ... """ % dict(server=link_server))
     >>> print_(system(buildout), end='') # doctest: +ELLIPSIS
     Develop: '/sample-buildout/recipes'
-    Uninstalling checkenv.
     Uninstalling extdemo.
+    Uninstalling checkenv.
     Installing extdemo...
 
     >>> rmdir(sample_buildout, 'recipes')
@@ -463,6 +480,10 @@ rpath
    A new-line separated list of directories to search for dynamic libraries
    at run time.
 
+setup-eggs
+   A new-line separated list of eggs that need to be installed
+   beforehand. It is useful to meet the `setup_requires` requirement.
+
 define
    A comma-separated list of names of C preprocessor variables to
    define.
@@ -499,6 +520,10 @@ swig-cpp
 swig-opts
    List of SWIG command line options
 
+environment
+   The name of a section with additional environment variables. The
+   environment variables are set before the egg is built.
+
 To illustrate this, we'll use a directory containing the extdemo
 example from the earlier section:
 

zc.recipe.egg_/src/zc/recipe/egg/egg.py

@@ -51,11 +51,44 @@ class Eggs(object):
                             if host.strip() != ''])
         self.allow_hosts = allow_hosts
 
+        self.buildout_dir = b_options['directory']
         options['eggs-directory'] = b_options['eggs-directory']
         options['_e'] = options['eggs-directory']  # backward compat.
         options['develop-eggs-directory'] = b_options['develop-eggs-directory']
         options['_d'] = options['develop-eggs-directory']  # backward compat.
 
+    def _get_patch_dict(self, options, egg=None):
+        patch_dict = {}
+        global_patch_binary = options.get('patch-binary', 'patch')
+        if egg:
+            egg = re.sub('[<>=].*', '', egg)
+            egg_list = [egg]
+        else:
+            egg_list = [x[:-8] for x in options.keys() if x.endswith('-patches')]
+        def get_option(egg, key, default):
+            if len(egg_list) == 1:
+                return options.get('%s-%s' % (egg, key),
+                                   options.get(key, default))
+            else:
+                return options.get('%s-%s' % (egg, key), default)
+        for egg in egg_list:
+            patches = filter(lambda x:x,
+                             map(lambda x:x.strip(),
+                                 get_option(egg, 'patches', '').splitlines()))
+            patches = list(patches)
+            if not patches:
+                continue
+            patch_options = get_option(egg, 'patch-options', '-p0').split()
+            patch_binary = get_option(egg, 'patch-binary', global_patch_binary)
+            patch_revision = int(get_option(egg, 'patch-revision', len(patches)))
+            patch_dict[egg] = {
+              'patches':patches,
+              'patch_options':patch_options,
+              'patch_binary':patch_binary,
+              'patch_revision':patch_revision,
+            }
+        return patch_dict
+
     def working_set(self, extra=()):
         """Separate method to just get the working set
 
@@ -77,6 +110,7 @@ class Eggs(object):
             distributions=orig_distributions + list(extra),
             develop_eggs_dir=options['develop-eggs-directory'],
             eggs_dir=options['eggs-directory'],
+            buildout_dir=self.buildout_dir,
             offline=(buildout_section.get('offline') == 'true'),
             newest=(buildout_section.get('newest') == 'true'),
             links=self.links,
@@ -98,6 +132,7 @@ class Eggs(object):
         distributions,
         eggs_dir,
         develop_eggs_dir,
+        buildout_dir,
         offline=False,
         newest=True,
         links=(),
@@ -131,6 +166,7 @@ class Eggs(object):
                     [develop_eggs_dir, eggs_dir]
                     )
             else:
+                patch_dict = self._get_patch_dict(self.options)
                 ws = zc.buildout.easy_install.install(
                     distributions, eggs_dir,
                     links=links,
@@ -138,9 +174,10 @@ class Eggs(object):
                     path=[develop_eggs_dir],
                     newest=newest,
                     allow_hosts=allow_hosts,
-                    allow_unknown_extras=allow_unknown_extras)
+                    allow_unknown_extras=allow_unknown_extras,
+                    patch_dict=patch_dict)
             ws = zc.buildout.easy_install.sort_working_set(
-                ws, eggs_dir, develop_eggs_dir
+                ws, buildout_dir, eggs_dir, develop_eggs_dir
                 )
             cache_storage[cache_key] = ws
 

zc.recipe.egg_/src/zc/recipe/egg/patches.rst

+
+Patching eggs before installation
+---------------------------------
+
+The SlapOS extensions of ``zc.recipe.egg`` supports applying patches before installing eggs.
+
+The syntax is to use a version with the magic string ``SlapOSPatched`` plus the number of
+patches to apply.
+
+
+Let's use a patch for demoneeded egg:
+
+    >>> write(sample_buildout, 'demoneeded.patch',
+    ... r"""diff -ru before/demoneeded-1.1/eggrecipedemoneeded.py after/demoneeded-1.1/eggrecipedemoneeded.py
+    ... --- before/demoneeded-1.1/eggrecipedemoneeded.py 2020-09-08 09:27:36.000000000 +0200
+    ... +++ after/demoneeded-1.1/eggrecipedemoneeded.py 2020-09-08 09:46:16.482243822 +0200
+    ... @@ -1,3 +1,3 @@
+    ... -y=1
+    ... +y="patched demoneeded"
+    ...  def f():
+    ...    pass
+    ... \ No newline at end of file
+    ... """)
+
+First, we install demoneeded directly:
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... parts = demoneeded
+    ...
+    ... [demoneeded]
+    ... recipe = zc.recipe.egg:eggs
+    ... eggs = demoneeded
+    ... find-links = %(server)s
+    ... index = %(server)s/index
+    ... demoneeded-patches =
+    ...   ./demoneeded.patch#4b8ad56711dd0d898a2b7957e9604079
+    ... demoneeded-patch-options = -p2
+    ...
+    ... [versions]
+    ... demoneeded = 1.1+SlapOSPatched001
+    ... """ % dict(server=link_server))
+
+When running buildout, we have a warning that a different version is installed, but that's not fatal.
+
+    >>> print_(system(buildout), end='')
+    Installing demoneeded.
+    patching file eggrecipedemoneeded.py
+    Installing demoneeded 1.1
+    Caused installation of a distribution:
+    demoneeded 1.1+slapospatched001
+    with a different version.
+
+The installed egg has the slapospatched001 marker
+
+    >>> ls(sample_buildout, 'eggs')
+    d  demoneeded-1.1+slapospatched001-pyN.N.egg
+    -  setuptools-0.7-py2.3.egg
+    d  zc.buildout-1.0-py2.3.egg
+
+The code of the egg has been patched:
+
+    >>> import glob
+    >>> import os.path
+    >>> cat(glob.glob(os.path.join(sample_buildout, 'eggs', 'demoneeded-1.1+slapospatched001*', 'eggrecipedemoneeded.py'))[0])
+    y="patched demoneeded"
+    def f():
+      pass
+
+Reset the state and also remove the installed egg
+
+    >>> remove('.installed.cfg')
+    >>> rmdir(glob.glob(os.path.join(sample_buildout, 'eggs', 'demoneeded-1.1+slapospatched001*'))[0])
+
+
+In the previous example we applied patches to an egg installed directly, but
+the same technique can be used to apply patches on eggs installed as dependencies.
+
+In this example we install demo and apply a patch to demoneeded, which is a dependency to demo. 
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... parts = demo
+    ...
+    ... [demo]
+    ... recipe = zc.recipe.egg
+    ... eggs = demo
+    ... find-links = %(server)s
+    ... index = %(server)s/index
+    ... demoneeded-patches =
+    ...   ./demoneeded.patch#4b8ad56711dd0d898a2b7957e9604079
+    ... demoneeded-patch-options = -p2
+    ...
+    ... [versions]
+    ... demoneeded = 1.1+SlapOSPatched001
+    ... """ % dict(server=link_server))
+
+When running buildout, we also have that warning that a different version is installed.
+
+    >>> print_(system(buildout), end='')
+    Installing demo.
+    Getting distribution for 'demo'.
+    Got demo 0.3.
+    patching file eggrecipedemoneeded.py
+    Installing demoneeded 1.1
+    Caused installation of a distribution:
+    demoneeded 1.1+slapospatched001
+    with a different version.
+    Generated script '/sample-buildout/bin/demo'.
+
+The installed egg has the slapospatched001 marker
+
+    >>> ls(sample_buildout, 'eggs')
+    d  demo-0.3-pyN.N.egg
+    d  demoneeded-1.1+slapospatched001-pyN.N.egg
+    -  setuptools-0.7-py2.3.egg
+    d  zc.buildout-1.0-py2.3.egg
+
+If we run the demo script we see the patch was applied:
+
+    >>> print_(system(join(sample_buildout, 'bin', 'demo')), end='')
+    3 patched demoneeded

zc.recipe.egg_/src/zc/recipe/egg/tests.py

@@ -100,6 +100,26 @@ def test_suite():
                zc.buildout.testing.not_found,
                ])
             ),
+        doctest.DocFileSuite(
+            'patches.rst',
+            setUp=setUp, tearDown=zc.buildout.testing.buildoutTearDown,
+            optionflags=doctest.NORMALIZE_WHITESPACE | doctest.ELLIPSIS,
+            checker=renormalizing.RENormalizing([
+               zc.buildout.testing.normalize_path,
+               zc.buildout.testing.normalize_endings,
+               zc.buildout.testing.normalize_script,
+               zc.buildout.testing.normalize_egg_py,
+               zc.buildout.tests.normalize_bang,
+               zc.buildout.tests.normalize_S,
+               zc.buildout.testing.not_found,
+               zc.buildout.testing.easy_install_deprecated,
+               (re.compile(r'[d-]  zc.buildout(-\S+)?[.]egg(-link)?'),
+                'zc.buildout.egg'),
+               (re.compile(r'[d-]  setuptools-[^-]+-'), 'setuptools-X-'),
+               (re.compile(r'eggs\\\\demo'), 'eggs/demo'),
+               (re.compile(r'[a-zA-Z]:\\\\foo\\\\bar'), '/foo/bar'),
+               ])
+            ),
         ]
     if not WINDOWS:
         suites.append(

[Jérome Perrin]

@xavier_thompson there are tests failing in loop since this merge ( https://erp5js.nexedi.net/#/test_result_module/20240508-105335FFC ) , can you please check, maybe it's needed to apply already some changes from slapos!1550 (merged)