Commit eb1f843f authored by Łukasz Nowak's avatar Łukasz Nowak

Update Release Candidate

parents 07bbdab1 de1e9ea0
...@@ -11,7 +11,6 @@ extends = ...@@ -11,7 +11,6 @@ extends =
../openldap/buildout.cfg ../openldap/buildout.cfg
../dash/buildout.cfg ../dash/buildout.cfg
../zlib/buildout.cfg ../zlib/buildout.cfg
../../stack/slapos.cfg
[condor] [condor]
recipe = slapos.recipe.build recipe = slapos.recipe.build
......
[buildout] [buildout]
extends = extends =
../../stack/slapos.cfg ../lxml-python/buildout.cfg
../python-kerberos/buildout.cfg ../python-kerberos/buildout.cfg
../git/buildout.cfg ../git/buildout.cfg
......
...@@ -8,7 +8,6 @@ extends = ...@@ -8,7 +8,6 @@ extends =
../perl/buildout.cfg ../perl/buildout.cfg
../tar/buildout.cfg ../tar/buildout.cfg
../binutils/buildout.cfg ../binutils/buildout.cfg
../zlib/buildout.cfg
parts = parts =
gcc-8.2 gcc-8.2
...@@ -21,6 +20,8 @@ pre-configure = ...@@ -21,6 +20,8 @@ pre-configure =
set %(location)s/bin set %(location)s/bin
mkdir -p $1 mkdir -p $1
ln -s ${binutils:location}/bin/ld $1/ld ln -s ${binutils:location}/bin/ld $1/ld
# remove "dependency_libs=' -lz'" line (-lz not needed anymore because the internal zlib was used)
sed -i '/^libbacktrace\.la:/{ N; s,$,\n\tsed -i /^dependency_libs=/d $@,; }' libbacktrace/Makefile.in
configure-options = configure-options =
--disable-bootstrap --disable-bootstrap
--disable-multilib --disable-multilib
...@@ -31,6 +32,7 @@ configure-options = ...@@ -31,6 +32,7 @@ configure-options =
--with-isl=${isl:location} --with-isl=${isl:location}
--with-ld=@@LOCATION@@/bin/ld --with-ld=@@LOCATION@@/bin/ld
--with-as=${binutils:location}/bin/as --with-as=${binutils:location}/bin/as
--with-internal-zlib
post-install = post-install =
cd '%(location)s/bin' cd '%(location)s/bin'
ln -s gcc cc ln -s gcc cc
...@@ -51,8 +53,7 @@ post-install = ...@@ -51,8 +53,7 @@ post-install =
EOF EOF
chmod +x ld chmod +x ld
environment = environment =
CPPFLAGS=-I${zlib:location}/include LDFLAGS=-Wl,-rpath=${gmp:location}/lib -Wl,-rpath=${isl:location}/lib -Wl,-rpath=${mpc:location}/lib -Wl,-rpath=${mpfr:location}/lib
LDFLAGS=-Wl,-rpath=${gmp:location}/lib -Wl,-rpath=${isl:location}/lib -Wl,-rpath=${mpc:location}/lib -Wl,-rpath=${mpfr:location}/lib -L${zlib:location}/lib -Wl,-rpath=${zlib:location}/lib
PATH=${binutils:location}/bin:${gettext:location}/bin:${perl:location}/bin:${tar:location}/bin:%(PATH)s PATH=${binutils:location}/bin:${gettext:location}/bin:${perl:location}/bin:${tar:location}/bin:%(PATH)s
[gcc-5.5] [gcc-5.5]
......
...@@ -100,8 +100,8 @@ pre-configure = ...@@ -100,8 +100,8 @@ pre-configure =
cd fake_mariadb_source cd fake_mariadb_source
ln -s ${mariadb:location}/wsrep-lib ln -s ${mariadb:location}/wsrep-lib
cp -a ${mariadb:location}/include/mysql/server include cp -a ${mariadb:location}/include/mysql/server include
cp -a include/private sql chmod -R u+w include # so that buildout can delete this compile-dir after install
chmod -R a+w include sql # so that buildout can delete this compile-dir after install mv include/private sql
mkdir -p ${:plugin-dir} mkdir -p ${:plugin-dir}
configure-options = configure-options =
--with-mysql-source=fake_mariadb_source --with-mysql-source=fake_mariadb_source
...@@ -109,7 +109,7 @@ configure-options = ...@@ -109,7 +109,7 @@ configure-options =
--disable-static --disable-static
--disable-document --disable-document
post-install = post-install =
cp -ra ${mariadb:location}/lib/plugin/* ${:plugin-dir} cp -rs ${mariadb:location}/lib/plugin/* ${:plugin-dir}
plugin-dir = @@LOCATION@@/lib/plugin plugin-dir = @@LOCATION@@/lib/plugin
install-sql = @@LOCATION@@/share/mroonga/install.sql install-sql = @@LOCATION@@/share/mroonga/install.sql
make-targets = plugindir=${:plugin-dir} install make-targets = plugindir=${:plugin-dir} install
......
...@@ -20,7 +20,7 @@ parts = ...@@ -20,7 +20,7 @@ parts =
python3 python3
[python3] [python3]
<= python3.6 <= python3.7
[python3-common] [python3-common]
recipe = slapos.recipe.cmmi recipe = slapos.recipe.cmmi
...@@ -61,12 +61,7 @@ md5sum = 986078f11b39074be22a199e56491d98 ...@@ -61,12 +61,7 @@ md5sum = 986078f11b39074be22a199e56491d98
[python3.7] [python3.7]
<= python3-common <= python3-common
version = 3.7 version = 3.7
package_version = 3.7.2 package_version = 3.7.7
md5sum = df6ec36011808205beda239c72f947cb md5sum = 172c650156f7bea68ce31b2fd01fa766
patch-options = patch-options =
patches = patches =
environment =
PATH=${xz-utils:location}/bin:%(PATH)s
CPPFLAGS=-I${zlib:location}/include -I${xz-utils:location}/include -I${readline:location}/include -I${libexpat:location}/include -I${libffi:location}/include -I${ncurses:location}/include -I${ncurses:location}/include/ncursesw -I${bzip2:location}/include -I${gdbm:location}/include -I${openssl:location}/include -I${sqlite3:location}/include -I${gettext:location}/include
LDFLAGS=-L${zlib:location}/lib -L${xz-utils:location}/lib -L${readline:location}/lib -L${libexpat:location}/lib -L${libffi:location}/lib -L${ncurses:location}/lib -L${bzip2:location}/lib -L${gdbm:location}/lib -L${openssl:location}/lib -L${sqlite3:location}/lib -Wl,-rpath=${zlib:location}/lib -Wl,-rpath=${xz-utils:location}/lib -Wl,-rpath=${readline:location}/lib -Wl,-rpath=${libexpat:location}/lib -Wl,-rpath=${libffi:location}/lib -Wl,-rpath=${ncurses:location}/lib -Wl,-rpath=${bzip2:location}/lib -Wl,-rpath=${gdbm:location}/lib -Wl,-rpath=${openssl:location}/lib -Wl,-rpath=${sqlite3:location}/lib -L${gettext:location}/lib -Wl,-rpath=${gettext:location}/lib -Wl,-rpath=${file:location}/lib
# LD_LIBRARY_PATH=${libpng:location}/lib
...@@ -3,8 +3,7 @@ ...@@ -3,8 +3,7 @@
[buildout] [buildout]
extends = extends =
../../stack/slapos.cfg ../../stack/slapos.cfg
../../component/gcc/buildout.cfg buildout.cfg
../../component/r-language/buildout.cfg
parts = parts =
eggs eggs
......
...@@ -14,7 +14,6 @@ extends = ...@@ -14,7 +14,6 @@ extends =
../pkgconfig/buildout.cfg ../pkgconfig/buildout.cfg
../openldap/buildout.cfg ../openldap/buildout.cfg
../gnutls/buildout.cfg ../gnutls/buildout.cfg
../../stack/slapos.cfg
[download-boinc] [download-boinc]
recipe = slapos.recipe.build:download recipe = slapos.recipe.build:download
......
...@@ -16,11 +16,6 @@ extends = ...@@ -16,11 +16,6 @@ extends =
../gnutls/buildout.cfg ../gnutls/buildout.cfg
../mariadb/buildout.cfg ../mariadb/buildout.cfg
../curl/buildout.cfg ../curl/buildout.cfg
../../stack/slapos.cfg
[mariadb]
# Compile dir is for plugins, not needed in boinc
keep-compile-dir = false
#checkout boinc package from svn repository #checkout boinc package from svn repository
[boinc-package] [boinc-package]
......
...@@ -81,11 +81,6 @@ setup(name=name, ...@@ -81,11 +81,6 @@ setup(name=name,
'apachephp = slapos.recipe.apachephp:Recipe', 'apachephp = slapos.recipe.apachephp:Recipe',
'apachephpconfigure = slapos.recipe.apachephpconfigure:Recipe', 'apachephpconfigure = slapos.recipe.apachephpconfigure:Recipe',
'apacheproxy = slapos.recipe.apacheproxy:Recipe', 'apacheproxy = slapos.recipe.apacheproxy:Recipe',
'boinc = slapos.recipe.boinc:Recipe',
'boinc.app = slapos.recipe.boinc:App',
'boinc.client = slapos.recipe.boinc:Client',
'bonjourgrid = slapos.recipe.bonjourgrid:Recipe',
'bonjourgrid.client = slapos.recipe.bonjourgrid:Client',
'certificate_authority = slapos.recipe.certificate_authority:Recipe', 'certificate_authority = slapos.recipe.certificate_authority:Recipe',
'certificate_authority.request = slapos.recipe.certificate_authority:Request', 'certificate_authority.request = slapos.recipe.certificate_authority:Request',
'check_page_content = slapos.recipe.check_page_content:Recipe', 'check_page_content = slapos.recipe.check_page_content:Recipe',
......
lamp
=====
The lamp recipe helps you to deploy simply a php based application on slapos. This recipe is
able to setup mariadb, apache and apache-php for your php application, and is also capable of
configuring your software during installation to ensure a full compatibility.
How to use lamp ?
-----------------
just add this part in your software.cfg to use the lamp.simple module
.. code-block:: ini
[instance-recipe]
egg = slapos.cookbook
module = lamp.simple
you also need to extend lamp.cfg
.. code-block:: ini
extends =
https://lab.nexedi.com/nexedi/slapos/raw/slapos-0.50/stack/lamp.cfg
lamp.runner
===========
When you install some software (such as prestashop) you need to remove or rename folder, with slapos you can not
access to the www-data directory. to do this, you need to tell to lamp recipe to remove or/and it when software
will be instantiated. Some software requires more than rename or delete a folder (manualy create database etc...)
in this case you need to write a python script and lamp recipe must run it when installing your software.
How to use lamp.runner ?
------------------------
this part of lamp recipe work with slapos.toolbox, Therefore you must add it to your recipe.
in software.cfg, replace instance-recipe-egg part by
.. code-block:: ini
[instance-recipe-egg]
recipe = zc.recipe.egg
eggs =
${python-mysqlclient:egg}
${instance-recipe:egg}
slapos.toolbox[lampconfigure]
and add into your instance.cfg
.. code-block:: ini
lampconfigure_directory = ${buildout:bin-directory}/lampconfigure
CONDITION
----------
the action (delete, rename, script, chmod) only starts when the condition is filled.
in instance.cfg, add::
file_token = path_of_file
and the action will begin when path_of_www-data/path_of_file will be created
you can also use database to check condition. add ::
table_name = name_of_table
constraint = sql_where_condition
``name_of_table`` is the full or partial name(in some cases we can not know the prefix used to create tables) of table
into mariadb databse for example ``table_name = admin``. if you use
``name_of_table = **``, the action will begin when database is ready.
constraint is the sql_condition to use when search entry into name_of_table for example constraint = ``admin_id=1``
you can't use file_token and table_name at the same time, otherwise file_token will be used in priority. Beware of conditions that will never be satisfied.
ACTION
-------
The action starts when condition is true
1- delete file or folder into instance.cfg, use::
delete = file_or_folder1, file_or_folder2, file_or_folder3 ...
for example delete = admin
2- rename file or folder
into instance.cfg, use
rename_chmod = mode (optional)
rename = old_name1 => new_name1, old_name2 => new_name2, ...
you can also use
rename = old_name1, old_name2 => new_name2, ... in this case old_name1 will be rename and the new name will be chose
by joining old_name1 and mysql_user: this should give
rename = old_name1 => old_name1-mysql_user, old_name2 => new_name2, ...
use rename_chmod to apply a mode to new_name1, new_name2, ...
3- Change mode of file or directory
this is usefull if you want to change the mode of files into your www-data, use
chmod = file1, file2, ....
mode = mode_to_apply (ex= 0644)
4- Launch python script
use script = ${configure-script:location}/${configure-script:filename} into instance.cfg, add part configure-script
into software.cfg
.. code-block:: ini
parts = configure-script
[configure-script]
recipe = hexagonit.recipe.download
location = ${buildout:parts-directory}/${:_buildout_section_name_}
url = url_of_script_name.py
filename = script_name.py
download-only = True
The script_name.py should contain a main function, sys.argv is given to the main. you can write script_name.py like this::
...
def setup(args):
mysql_port, mysql_host, mysql_user, mysql_password, mysql_database, base_url, htdocs = args
.......
if __name__ == '__main__':
setup(sys.argv[1:])
- base_url: is the url of php software
- htdocs: is the path of www-data directory
- mysql_user, mysql_password, mysql_database, mysql_host: is the mariadb parameters
you can also use "import MySQLdb" if you want to access to database via your python script
\ No newline at end of file
This diff is collapsed.
This diff is collapsed.
#!%(dash)s
sed -i "/remove the die/d" %(installroot)s/html/ops/create_forums.php
sed -i "s#REPLACE WITH PROJECT NAME#%(fullname)s#" %(installroot)s/html/project/project.inc
sed -i "s#REPLACE WITH COPYRIGHT HOLDER#%(copyright)s#" %(installroot)s/html/project/project.inc
sed -i.old -e "/<\/config>/i\<uldl_pid>%(uldl_pid)s</uldl_pid>" %(installroot)s/config.xml
sed -i.old -e "/<\/config>/i\<httpd_user>%(user)s</httpd_user>" %(installroot)s/config.xml
#!%(dash)s
if [ $# -ne 2 ]
then
echo not enough argument.
echo ARGS: appname installroot
else
sed -i.old -e "/<\/boinc>/i\<app>\n<name>$1</name>\n<user_friendly_name>$1</user_friendly_name>\n</app>" $2/project.xml
sed -i.old -e "/<\/daemons>/i\<daemon>\n<cmd>\nsample_bitwise_validator -d 3 -app $1\n</cmd>\n</daemon>" $2/config.xml
sed -i.old -e "/<\/daemons>/i\<daemon>\n<cmd>\nsample_assimilator -d 3 -app $1\n</cmd>\n</daemon>" $2/config.xml
fi
\ No newline at end of file
##############################################################################
#
# Copyright (c) 2010 Vifib SARL and Contributors. All Rights Reserved.
#
# WARNING: This program as such is intended to be used by professional
# programmers who take the whole responsibility of assessing all potential
# consequences resulting from its eventual inadequacies and bugs
# End users who are looking for a ready-to-use solution with commercial
# guarantees and support are strongly adviced to contract a Free Software
# Service Company
#
# This program is Free Software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
##############################################################################
from slapos.recipe.librecipe import GenericBaseRecipe
import os
import subprocess
import pwd
import signal
import zc.buildout
class Recipe(GenericBaseRecipe):
"""Deploy a fully operational BonjourGrid Master architecture."""
def install(self):
path_list = []
condor_wrapper = self.options['condor-wrapper'].strip()
boinc_wrapper = self.options['boinc-wrapper'].strip()
startCondor = startBoinc = False
condor_wrapper_list = []
boinc_wrapper_list = []
for file in os.listdir(condor_wrapper):
condor_wrapper_list.append(os.path.join(condor_wrapper, file))
for file in os.listdir(boinc_wrapper):
boinc_wrapper_list.append(os.path.join(boinc_wrapper, file))
type = self.options['type'].strip()
if type == "condor":
startCondor = True
project = self.options['condor_host'].strip()
if type == "boinc":
project = self.options['url-boinc'].strip()
startBoinc = True
#Generate BOINC/Condor launcher script
grid_wrapper = self.options['boinc_condor_wrapper'].strip()
parameters = dict(startCondor=startCondor, startBoinc=startBoinc,
bg_base=self.options['work_dir'].strip(),
condor_wrapper_list=condor_wrapper_list,
boinc_wrapper_list=boinc_wrapper_list)
bonjourGrid_wrapper = self.createPythonScript(grid_wrapper,
__name__ + '.configure.launchScript',
(parameters,)
)
path_list.append(bonjourGrid_wrapper)
#Generate wrapper for BonjourGrid Master
bonjourgrid_master = self.options['master_script'].strip()
python = self.options['python-bin'].strip()
bg_wrapper = self.options['wrapper'].strip()
log = self.options['log_file'].strip()
pid_file = self.options['pid_file'].strip()
wrapper = self.createWrapper(bg_wrapper,
(python, bonjourgrid_master, '--log_file', log,
'--pid_file', pid_file,
'--master_wrapper', grid_wrapper,
'--directory', self.options['work_dir'].strip(),
'--server', self.options['redis-url'].strip(),
'--port', self.options['redis-port'].strip(),
'--num_workers', self.options['nworkers'].strip(),
),
)
path_list.append(wrapper)
#generate Computer information file
config_info_file = os.path.join(self.options['work_dir'].strip(),
'machineinfo.sh')
config_info = self.createFile(config_info_file,
self.substituteTemplate(self.getTemplateFilename('machineinfo.sh.in'),
dict(ip_address=self.options['ipv6'].strip(),
project=project,
middleware=type)))
os.chmod(config_info_file, 0o744)
path_list.append(config_info)
update = install
class Client(GenericBaseRecipe):
def install(self):
path_list = []
boinc_script = self.options['boinc_script'].strip()
condor_script = self.options['condor_script'].strip()
#Generate wrapper for BonjourGrid Worker
bonjourgrid_client = self.options['client_script'].strip()
python = self.options['python-bin'].strip()
bg_wrapper = self.options['wrapper'].strip()
log = self.options['log_file'].strip()
pid_file = self.options['pid_file'].strip()
wrapper = self.createWrapper(bg_wrapper,
(python, bonjourgrid_client, '--log_file', log,
'--pid_file', pid_file,
'--boinc_wrapper', boinc_script,
'--condor_wrapper', condor_script,
'--directory', self.options['work_dir'].strip(),
'--install_directory', self.options['install_dir'].strip(),
'--server', self.options['redis-url'].strip(),
'--port', self.options['redis-port'].strip(),
),
)
path_list.append(wrapper)
#generate BOINC and Condor configure script for bonjourgrid
boinc_wrapper = self.createPythonScript(boinc_script,
'%s.boinc.runBoinc' % __name__,
dict(ipv6=self.options['ipv6'].strip(),
email=self.options['email'].strip(),
boinc_wrapper=self.options['boinc_wrapper'].strip(),
boinc_cmd=self.options['boinc_cmd'].strip(),
boinc_rpc_port=self.options['boinc_rpc_port'],
boinc_install_dir=self.options['boinc_install_dir'].strip(),
boinc_passwd=self.options['boinc_passwd'].strip(),
account_name=self.options['account_name'].strip(),
account_passwd=self.options['account_passwd'].strip(),
)
)
path_list.append(boinc_wrapper)
condor_wrapper = self.createPythonScript(condor_script,
'%s.condor.runCondor' % __name__,
dict(ipv6=self.options['ipv6'].strip(),
condor_bin=self.options['condor_bin'].strip(),
condor_sbin=self.options['condor_sbin'].strip(),
condor_wrapper=self.options['condor_wrapper'].strip(),
condor_config=self.options['condor_config'].strip(),
condor_config_local=self.options['condor_config_local'].strip(),
)
)
path_list.append(condor_wrapper)
# -*- coding: utf-8 -*-
import os
import sys
import re
import subprocess
import time
import signal
def startProcess(launch_args, env=None, cwd=None, stdout=subprocess.PIPE):
process = subprocess.Popen(launch_args, stdout=stdout,
stderr=subprocess.STDOUT, env=env,
cwd=cwd)
result = process.communicate()[0]
if process.returncode is None or process.returncode != 0:
raise NameError("Failed to execute executable.\nThe error was: %s" % result)
def joinProject(args, base_cmd):
"""Finish BOINC Client configuration with create account and attach project"""
project_args = base_cmd + ['--project_attach', args['project_url'],
args['key']]
startProcess(project_args, cwd=args['boinc_install_dir'])
def createAccount(config, base_cmd):
"""Connect to BOINC Master and create an account
"""
account_args = base_cmd + ['--create_account', config['project_url'],
config['email'], config['account_passwd'],
config['account_name']]
startProcess(account_args, cwd=config['boinc_install_dir'])
account_file = os.path.join(config['boinc_install_dir'], 'create_account.xml')
key = re.search("<authenticator>([\w\d\._]+)</authenticator>",
open(account_file, 'r').read()).group(1)
return key
def runBoinc(config):
if len(sys.argv) < 2:
print "Argument Error: uses %s project_url" % sys.argv[0]
exit(1)
if type(config) == type(""):
print "Error: bonjourgrid.xml parsing error, file not exist or corrupted"
exit(1)
#XXX Using define values here for Boinc Master URL
config['project_url'] = sys.argv[1]
#launch Boinc Client
boinc = subprocess.Popen([config['boinc_wrapper']],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT)
#Retrieve ipv4 using by Boinc-client in client-configuration
client_config = os.path.join(config['boinc_install_dir'], 'client_state.xml')
while not os.path.exists(client_config):
time.sleep(5)
print "Search for file '%r'..." % client_config
time.sleep(10)
try:
#Scan client state xml to find client ipv4 adress
host = re.search("<ip_addr>([\w\d\.:]+)</ip_addr>",
open(client_config, 'r').read()).group(1)
base_cmd = [config['boinc_cmd'], '--host',
host + ":" + str(config['boinc_rpc_port']),
'--passwd', config['boinc_passwd']]
#Create Account for current instance on BOINC master
print "Create account for current client..."
key = createAccount(config, base_cmd)
config['key'] = key
print "Done. The account key is %s" % key
#Attach project to Boinc Master
print "Attach client to Boinc Master at %s " % config['project_url']
try:
joinProject(config, base_cmd)
except Exception, e:
print e
print "Done! Waiting for Boinc Client now..."
except Exception, e:
#An error occure!!!
os.kill(boinc.pid, signal.SIGTERM)
print e
#wait for Boinc client execution
boinc.wait()
# -*- coding: utf-8 -*-
import os
import sys
import re
import subprocess
import time
def writeFile(file, content):
f = open(file, 'w')
f.write(content)
f.close()
def updateCondorConfig(path, path_local, hostname, ipv6):
"""Replace Static information into condor_config and condor_config.local files"""
#replace condor host into condor_config
text = open(path, 'r').read()
text = re.sub(r'\[%s\]' % ipv6, hostname, text, flags=re.IGNORECASE)
writeFile(path, text)
#replace condor host into condor_config.local
text = open(path_local, 'r').read()
text = re.sub(r'\[%s\]' % ipv6, hostname, text, flags=re.IGNORECASE)
writeFile(path_local, text)
def updateCondorWrapper(folder, hostname, ipv6):
"""Replace slapos generated value by the true value"""
for file in os.listdir(folder):
path = os.path.join(folder, file)
if os.path.exists(path) and not os.path.isdir(path):
text = re.sub(r'\[%s\]' % ipv6, hostname, open(path, 'r').read(),
flags=re.IGNORECASE)
writeFile(path, text)
def runCondor(config):
if len(sys.argv) < 2:
print "Argument Error: uses %s hostname" % sys.argv[0]
exit(1)
hostname = sys.argv[1]
updateCondorConfig(config['condor_config'], config['condor_config_local'],
hostname, config['ipv6'])
updateCondorWrapper(config['condor_bin'], hostname, config['ipv6'])
updateCondorWrapper(config['condor_sbin'], hostname, config['ipv6'])
#launch Boinc Client
condor = subprocess.Popen([config['condor_wrapper']],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT)
condor.wait()
##############################################################################
#
# Copyright (c) 2010 Vifib SARL and Contributors. All Rights Reserved.
#
# WARNING: This program as such is intended to be used by professional
# programmers who take the whole responsibility of assessing all potential
# consequences resulting from its eventual inadequacies and bugs
# End users who are looking for a ready-to-use solution with commercial
# guarantees and support are strongly adviced to contract a Free Software
# Service Company
#
# This program is Free Software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
##############################################################################
import os
import subprocess
import time
def runProcess(args, file):
filename = file.split('/')[-1:][0]
stdout_file = open(os.path.join(args['bg_log'], filename + ".log"), 'w')
process = subprocess.Popen(file, stdout=stdout_file,
stderr=subprocess.STDOUT)
fp = open(os.path.join(args['bg_pid'], filename + '.pid'), 'w')
fp.write(str(process.pid))
fp.close()
return process.pid
def launchScript(args):
print "Sleep for a few second..."
time.sleep(10)
pid_list = []
bg_pid = os.path.join(args['bg_base'], 'pid')
bg_log = os.path.join(args['bg_base'], 'log')
args['bg_pid'] = bg_pid
args['bg_log'] = bg_log
if not os.path.exists(bg_pid):
os.mkdir(bg_pid)
if not os.path.exists(bg_log):
os.mkdir(bg_log)
#launch all Condor wrapper
if args['startCondor']:
for file in args['condor_wrapper_list']:
pid_list.append(runProcess(args, file))
#Launch all BOINC wrapper
if args['startBoinc']:
for file in args['boinc_wrapper_list']:
pid_list.append(runProcess(args, file))
for pid in pid_list:
print "Parent waiting for process child: %s " % pid
result = os.waitpid(pid, 0)
print "Done...", result
# This script generates a file (with the name `hostname`) of the characteristics of the machine
Mhz=`grep -i Mhz /proc/cpuinfo | cut -d : -f2 | head -1 | cut -f2 -d " "`
mem=`grep -i MemTotal /proc/meminfo | cut -f2 -d :`
Ram=`echo $mem | cut -f1 -d " "`
Cpu=`uname -a | cut -f3 -d " "`
H=`hostname`
Nbproc=`grep processor /proc/cpuinfo |wc -l`
Ip=%(ip_address)s
status="in execution"
secours="host1"
middleware="%(middleware)s"
project="%(project)s"
c="{'"MHZ"':\"$Mhz\",'"Ram"':\"$Ram\",'"Cpu"':\"$Cpu\",'"HOST"':\"$H\",'"IP"':\"$Ip\",'"STATUS"':\"$status\",'"SECOURS"':\"$secours\",'"MIDDLEWARE"':\"$middleware\",'"PROJECT"':\"$project\",}"
filename=`hostname`
echo $c > $filename
...@@ -107,6 +107,3 @@ gunicorn = 19.1.1 ...@@ -107,6 +107,3 @@ gunicorn = 19.1.1
plone.recipe.command = 1.1 plone.recipe.command = 1.1
slapos.recipe.template = 2.4.3 slapos.recipe.template = 2.4.3
PyRSS2Gen = 1.1 PyRSS2Gen = 1.1
gitdb2 = 2.0.5
smmap2 = 2.0.5
...@@ -54,7 +54,7 @@ md5sum = f20d6c3d2d94fb685f8d26dfca1e822b ...@@ -54,7 +54,7 @@ md5sum = f20d6c3d2d94fb685f8d26dfca1e822b
[template-default-slave-virtualhost] [template-default-slave-virtualhost]
filename = templates/default-virtualhost.conf.in filename = templates/default-virtualhost.conf.in
md5sum = b5447e33658b8a81b75275630f9da119 md5sum = 7e26935bb6daf00d8fc01d97eebc7abd
[template-cached-slave-virtualhost] [template-cached-slave-virtualhost]
filename = templates/cached-virtualhost.conf.in filename = templates/cached-virtualhost.conf.in
......
...@@ -44,7 +44,7 @@ ...@@ -44,7 +44,7 @@
"type": "string" "type": "string"
}, },
"https-only": { "https-only": {
"default": "false", "default": "true",
"description": "If set to true, http requests will be redirected to https", "description": "If set to true, http requests will be redirected to https",
"enum": [ "enum": [
"false", "false",
......
...@@ -72,7 +72,7 @@ ...@@ -72,7 +72,7 @@
"type": "string" "type": "string"
}, },
"https-only": { "https-only": {
"default": "false", "default": "true",
"description": "If set to true, http requests will be redirected to https", "description": "If set to true, http requests will be redirected to https",
"enum": [ "enum": [
"false", "false",
......
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
{%- set enable_h2 = slave_parameter['global_disable_http2'].lower() not in TRUE_VALUES and slave_parameter.get('enable-http2', slave_parameter['enable_http2_by_default']).lower() in TRUE_VALUES %} {%- set enable_h2 = slave_parameter['global_disable_http2'].lower() not in TRUE_VALUES and slave_parameter.get('enable-http2', slave_parameter['enable_http2_by_default']).lower() in TRUE_VALUES %}
{%- set ssl_proxy_verify = slave_parameter.get('ssl-proxy-verify', '').lower() in TRUE_VALUES %} {%- set ssl_proxy_verify = slave_parameter.get('ssl-proxy-verify', '').lower() in TRUE_VALUES %}
{%- set disabled_cookie_list = slave_parameter.get('disabled-cookie-list', '').split() %} {%- set disabled_cookie_list = slave_parameter.get('disabled-cookie-list', '').split() %}
{%- set https_only = slave_parameter.get('https-only', '').lower() in TRUE_VALUES %} {%- set https_only = slave_parameter.get('https-only', 'true').lower() in TRUE_VALUES %}
{%- set slave_type = slave_parameter.get('type', '') %} {%- set slave_type = slave_parameter.get('type', '') %}
{%- set host_list = server_alias_list %} {%- set host_list = server_alias_list %}
{%- set cipher_list = slave_parameter.get('cipher_list', '').strip() %} {%- set cipher_list = slave_parameter.get('cipher_list', '').strip() %}
......
This diff is collapsed.
...@@ -52,6 +52,3 @@ gunicorn = 19.1.1 ...@@ -52,6 +52,3 @@ gunicorn = 19.1.1
plone.recipe.command = 1.1 plone.recipe.command = 1.1
slapos.recipe.template = 2.4.3 slapos.recipe.template = 2.4.3
inotifyx = 0.2.2 inotifyx = 0.2.2
gitdb2 = 2.0.3
smmap2 = 2.0.3
[buildout] [buildout]
versions = versions
extends = extends =
buildout.hash.cfg buildout.hash.cfg
../../stack/slapos.cfg ../../stack/slapos.cfg
...@@ -142,10 +141,6 @@ scipy = 0.19.0 ...@@ -142,10 +141,6 @@ scipy = 0.19.0
# tornado==4.4.2 # tornado==4.4.2
singledispatch = 3.4.0.3 singledispatch = 3.4.0.3
# Required by:
# matplotlib==2.1.2
subprocess32 = 3.2.7
# Required by: # Required by:
# prompt-toolkit==1.0.13 # prompt-toolkit==1.0.13
wcwidth = 0.1.7 wcwidth = 0.1.7
......
...@@ -2,7 +2,6 @@ ...@@ -2,7 +2,6 @@
extends = extends =
../../stack/lamp/buildout.cfg ../../stack/lamp/buildout.cfg
../../stack/slapos.cfg
[application] [application]
recipe = slapos.recipe.build:download-unpacked recipe = slapos.recipe.build:download-unpacked
......
...@@ -144,7 +144,6 @@ ZODB = 4.4.5 ...@@ -144,7 +144,6 @@ ZODB = 4.4.5
coverage = 4.5.1 coverage = 4.5.1
mock = 3.0.5 mock = 3.0.5
ecdsa = 0.13 ecdsa = 0.13
gitdb2 = 2.0.0
msgpack = 0.5.6 msgpack = 0.5.6
msgpack-python = 0.5.6 msgpack-python = 0.5.6
mysqlclient = 1.3.12 mysqlclient = 1.3.12
...@@ -153,7 +152,6 @@ pycrypto = 2.6.1 ...@@ -153,7 +152,6 @@ pycrypto = 2.6.1
pycurl = 7.43.0 pycurl = 7.43.0
setproctitle = 1.1.10 setproctitle = 1.1.10
slapos.recipe.template = 4.4 slapos.recipe.template = 4.4
smmap2 = 2.0.1
transaction = 1.7.0 transaction = 1.7.0
zodbpickle = 1.0.4 zodbpickle = 1.0.4
zodbtools = 0.0.0.dev4 zodbtools = 0.0.0.dev4
......
...@@ -44,5 +44,3 @@ mode = 0644 ...@@ -44,5 +44,3 @@ mode = 0644
[versions] [versions]
slapos.recipe.template = 4.4 slapos.recipe.template = 4.4
inotifyx = 0.2.2 inotifyx = 0.2.2
gitdb2 = 2.0.3
smmap2 = 2.0.3
...@@ -63,6 +63,3 @@ GitPython = 2.1.11 ...@@ -63,6 +63,3 @@ GitPython = 2.1.11
lockfile = 0.12.2 lockfile = 0.12.2
feedparser = 5.2.1 feedparser = 5.2.1
atomize = 0.2.0 atomize = 0.2.0
gitdb2 = 2.0.4
smmap2 = 2.0.4
...@@ -201,7 +201,6 @@ zc.lockfile = 1.4 ...@@ -201,7 +201,6 @@ zc.lockfile = 1.4
bcrypt = 3.1.4 bcrypt = 3.1.4
dnspython = 1.15.0 dnspython = 1.15.0
funcsigs = 1.0.2 funcsigs = 1.0.2
gitdb2 = 2.0.4
httmock = 1.2.6 httmock = 1.2.6
manuel = 1.9.0 manuel = 1.9.0
mock = 2.0.0 mock = 2.0.0
...@@ -209,7 +208,6 @@ testfixtures = 6.11.0 ...@@ -209,7 +208,6 @@ testfixtures = 6.11.0
pem = 18.1.0 pem = 18.1.0
pycurl = 7.43.0.2 pycurl = 7.43.0.2
pyflakes = 2.0.0 pyflakes = 2.0.0
smmap2 = 2.0.4
zope.testing = 4.6.2 zope.testing = 4.6.2
urllib3 = 1.24.1 urllib3 = 1.24.1
# Required by: # Required by:
......
...@@ -139,17 +139,6 @@ Example : ...@@ -139,17 +139,6 @@ Example :
<parameter id="custom-frontend-basic-auth">true</parameter> <parameter id="custom-frontend-basic-auth">true</parameter>
</instance> </instance>
Git repositories :
------------------
It is easy to give access to your git repository/ies to everyone, or to clone it on your own computer. For this, fetch the git_url parameter returned by your webrunner instance. It should look like that : https://[IPV6]:PORT/git/YourRepo.git/
To create the repo, go to the folder srv/runner/project and initiate a new git repo (git init/clone --bare YourRepo). Then, to clone the repo, just append its name to the previous URL.
Please notice that your repositories are in public access for reading. However, an account is needed to push to the repository (use your webrunner account, or create a new user in the parameters section of the webrunner).
For the moment, the PORT is the port of monitoring, which is 9685.
Things to notice for the nex developer : Things to notice for the nex developer :
---------------------------------------- ----------------------------------------
......
...@@ -18,11 +18,11 @@ md5sum = 8d6878ff1d2e75010c50a1a2b0c13b24 ...@@ -18,11 +18,11 @@ md5sum = 8d6878ff1d2e75010c50a1a2b0c13b24
[template-runner] [template-runner]
filename = instance-runner.cfg filename = instance-runner.cfg
md5sum = 7100c6678576c285322f1445029cd4f2 md5sum = 8d85d8d80f1ae3ff13946d14d0d8fe72
[template-runner-import-script] [template-runner-import-script]
filename = template/runner-import.sh.jinja2 filename = template/runner-import.sh.jinja2
md5sum = 2852689640b632fc713d7a603ce66207 md5sum = f2e2493bc5da90a53f86e5bcf64d2d57
[instance-runner-import] [instance-runner-import]
filename = instance-runner-import.cfg.in filename = instance-runner-import.cfg.in
...@@ -34,7 +34,7 @@ md5sum = b992bb3391de9d6d422bfa8011d8ffc4 ...@@ -34,7 +34,7 @@ md5sum = b992bb3391de9d6d422bfa8011d8ffc4
[template-resilient] [template-resilient]
filename = instance-resilient.cfg.jinja2 filename = instance-resilient.cfg.jinja2
md5sum = 105ed7f54f251c64a2d34559360a5604 md5sum = bd0ad0b80d2b39189f9665c48f1b3830
[template_nginx_conf] [template_nginx_conf]
filename = nginx_conf.in filename = nginx_conf.in
...@@ -42,7 +42,7 @@ md5sum = 2b06f7eb9a1d45d250d4b92a944db925 ...@@ -42,7 +42,7 @@ md5sum = 2b06f7eb9a1d45d250d4b92a944db925
[template_httpd_conf] [template_httpd_conf]
filename = httpd_conf.in filename = httpd_conf.in
md5sum = 40825ef2d259ae3b86dfd2f28f597d3a md5sum = 1d96c29b931383b2a87b9ae049d07d74
[template_launcher] [template_launcher]
filename = launcher.in filename = launcher.in
...@@ -50,7 +50,11 @@ md5sum = 525e37ea8b2acf6209869999b15071a6 ...@@ -50,7 +50,11 @@ md5sum = 525e37ea8b2acf6209869999b15071a6
[template-slapos-cfg] [template-slapos-cfg]
filename = template/slapos.cfg.in filename = template/slapos.cfg.in
md5sum = e6a3ca1604ae5458248135cd6de0f3e6 md5sum = 95de0677e78fc06cc8304cc6caea9169
[template-slapformat-definition.cfg]
filename = template/slapformat-definition.cfg.in
md5sum = a94299dd2133956060486609e30b97ec
[template-parameters] [template-parameters]
filename = parameters.xml.in filename = parameters.xml.in
...@@ -62,7 +66,7 @@ md5sum = 7645048216fcf957f7773534cd0408dc ...@@ -62,7 +66,7 @@ md5sum = 7645048216fcf957f7773534cd0408dc
[template-supervisord] [template-supervisord]
filename = template/supervisord.conf.in filename = template/supervisord.conf.in
md5sum = 28f69b57c2835bddfcfbe312563eef51 md5sum = 37f053d75752e998fc3bb9e4bf29d776
[template-listener-slapgrid] [template-listener-slapgrid]
filename = template/listener_slapgrid.py.in filename = template/listener_slapgrid.py.in
......
...@@ -96,33 +96,3 @@ Alias /share {{ parameters.runner_home }} ...@@ -96,33 +96,3 @@ Alias /share {{ parameters.runner_home }}
</LimitExcept> </LimitExcept>
</Directory> </Directory>
SetEnv GIT_HTTP_EXPORT_ALL
ScriptSock {{ parameters.cgid_sock }}
ScriptAlias /git/ {{ parameters.git_http_backend }}/
ScriptAlias /git-public/ {{ parameters.git_http_backend }}/
RewriteCond %{QUERY_STRING} service=git-receive-pack [OR]
RewriteCond %{REQUEST_URI} /git-receive-pack$
<LocationMatch "^/git/">
SetEnv GIT_PROJECT_ROOT {{ parameters.project_private_folder }}
Order Deny,Allow
Deny from env=AUTHREQUIRED
AuthType Basic
AuthName "Git Access"
AuthUserFile "{{ parameters.htpasswd_file }}"
Require valid-user
</LocationMatch>
<LocationMatch "^/git-public/">
SetEnv GIT_PROJECT_ROOT {{ parameters.project_public_folder }}
Order Deny,Allow
Deny from env=AUTHREQUIRED
AuthType Basic
AuthName "Git Access"
AuthUserFile "{{ parameters.htpasswd_file }}"
Require valid-user
Satisfy any
</LocationMatch>
...@@ -12,7 +12,7 @@ ...@@ -12,7 +12,7 @@
{% set number_of_instances = 2 %} {% set number_of_instances = 2 %}
{% endif %} {% endif %}
{% set slaprunner_return = ['init-user', 'init-password', 'url', 'ssh-public-key', 'resilient-ssh-url', 'notification-id', 'ip', 'backend-url', 'url', 'ssh-url', 'ssh-command', 'webdav-url', 'public-url', 'git-public-url', 'git-private-url'] -%} {% set slaprunner_return = ['init-user', 'init-password', 'url', 'ssh-public-key', 'resilient-ssh-url', 'notification-id', 'ip', 'backend-url', 'url', 'ssh-url', 'ssh-command', 'webdav-url', 'public-url'] -%}
{% set monitor_return = ['monitor-base-url', 'monitor-url', 'monitor-user', 'monitor-password'] -%} {% set monitor_return = ['monitor-base-url', 'monitor-url', 'monitor-user', 'monitor-password'] -%}
{% set monitor_parameter = {'monitor-cors-domains': slapparameter_dict.pop('monitor-cors-domains', "monitor.app.officejs.com")} -%} {% set monitor_parameter = {'monitor-cors-domains': slapparameter_dict.pop('monitor-cors-domains', "monitor.app.officejs.com")} -%}
{% set monitor_dict = {'parameter': monitor_parameter, 'return': monitor_return, 'set-monitor-url': True} -%} {% set monitor_dict = {'parameter': monitor_parameter, 'return': monitor_return, 'set-monitor-url': True} -%}
...@@ -72,8 +72,6 @@ init-password = ${publish-early:init-password} ...@@ -72,8 +72,6 @@ init-password = ${publish-early:init-password}
ssh-command = ${request-runner:connection-ssh-command} ssh-command = ${request-runner:connection-ssh-command}
webdav-url = ${request-runner:connection-webdav-url} webdav-url = ${request-runner:connection-webdav-url}
public-url = ${request-runner:connection-public-url} public-url = ${request-runner:connection-public-url}
git-public-url = ${request-runner:connection-git-public-url}
git-private-url = ${request-runner:connection-git-private-url}
{% if slapparameter_dict.get('custom-frontend-backend-url') -%} {% if slapparameter_dict.get('custom-frontend-backend-url') -%}
custom-frontend-url = ${request-runner:connection-custom-frontend-url} custom-frontend-url = ${request-runner:connection-custom-frontend-url}
{% endif %} {% endif %}
......
...@@ -29,14 +29,6 @@ ...@@ -29,14 +29,6 @@
"public_url": { "public_url": {
"description": "Url of the public folder of your runner", "description": "Url of the public folder of your runner",
"type": "string" "type": "string"
},
"git_public_url": {
"description": "Public url of your repositories.",
"type": "string"
},
"git_private_url": {
"description": "Private url for your repositories. You can use it to push.",
"type": "string"
} }
}, },
"type": "object" "type": "object"
......
...@@ -21,6 +21,7 @@ common-runner-parts = ...@@ -21,6 +21,7 @@ common-runner-parts =
shellinabox shellinabox
shellinabox-service shellinabox-service
slapos-cfg slapos-cfg
slapformat-definition.cfg
cron-entry-prepare-software cron-entry-prepare-software
deploy-instance-parameters deploy-instance-parameters
instance-software instance-software
...@@ -151,8 +152,6 @@ project-test = $${:test}/project ...@@ -151,8 +152,6 @@ project-test = $${:test}/project
software-test = $${:test}/software software-test = $${:test}/software
instance-test = $${:test}/instance instance-test = $${:test}/instance
sessions = $${buildout:directory}/.sessions sessions = $${buildout:directory}/.sessions
private-project = $${:home}/.git-private
public-project = $${:home}/.git-public
[slaprunner] [slaprunner]
slaprunner = ${buildout:bin-directory}/slaprunner slaprunner = ${buildout:bin-directory}/slaprunner
...@@ -162,6 +161,7 @@ supervisor = ${buildout:bin-directory}/slapgrid-supervisorctl ...@@ -162,6 +161,7 @@ supervisor = ${buildout:bin-directory}/slapgrid-supervisorctl
git-binary = ${git:location}/bin/git git-binary = ${git:location}/bin/git
root_check = false root_check = false
slapos.cfg = $${directory:etc}/slapos.cfg slapos.cfg = $${directory:etc}/slapos.cfg
slapformat-definition.cfg = $${directory:etc}/slapformat-definition.cfg
working-directory = $${runnerdirectory:home} working-directory = $${runnerdirectory:home}
project-directory = $${runnerdirectory:project} project-directory = $${runnerdirectory:project}
instance_root = $${runnerdirectory:instance-root} instance_root = $${runnerdirectory:instance-root}
...@@ -389,11 +389,7 @@ htpasswd_file = $${directory:etc}/.htpasswd ...@@ -389,11 +389,7 @@ htpasswd_file = $${directory:etc}/.htpasswd
etc_dir = $${directory:etc} etc_dir = $${directory:etc}
var_dir = $${directory:var} var_dir = $${directory:var}
project_folder = $${directory:project} project_folder = $${directory:project}
project_private_folder = $${runnerdirectory:private-project}
project_public_folder = $${runnerdirectory:public-project}
runner_home = $${runnerdirectory:home} runner_home = $${runnerdirectory:home}
git_http_backend = ${git:location}/libexec/git-core/git-http-backend
cgid_sock = $${directory:run}/cgid.sock
httpd_cors_file = $${slaprunner-httpd-cors:location} httpd_cors_file = $${slaprunner-httpd-cors:location}
[httpd-conf] [httpd-conf]
...@@ -591,8 +587,6 @@ init-user = $${runner-htpasswd:user} ...@@ -591,8 +587,6 @@ init-user = $${runner-htpasswd:user}
init-password = $${runner-htpasswd:password} init-password = $${runner-htpasswd:password}
ssh-command = ssh $${user-info:pw-name}@$${slap-network-information:global-ipv6} -p $${runner-sshd-port:port} ssh-command = ssh $${user-info:pw-name}@$${slap-network-information:global-ipv6} -p $${runner-sshd-port:port}
ssh-url = ssh://$${user-info:pw-name};fingerprint=$${runner-sshd-publickey-fingerprint:fingerprint}@[$${slap-network-information:global-ipv6}]:$${runner-sshd-port:port} ssh-url = ssh://$${user-info:pw-name};fingerprint=$${runner-sshd-publickey-fingerprint:fingerprint}@[$${slap-network-information:global-ipv6}]:$${runner-sshd-port:port}
git-public-url = https://[$${httpd-parameters:global_ip}]:$${httpd-parameters:global_port}/git-public/
git-private-url = https://[$${httpd-parameters:global_ip}]:$${httpd-parameters:global_port}/git/
monitor-base-url = $${monitor-publish-parameters:monitor-base-url} monitor-base-url = $${monitor-publish-parameters:monitor-base-url}
{% if slapparameter_dict.get('no-ipv4-frontend', 'false') == 'false' -%} {% if slapparameter_dict.get('no-ipv4-frontend', 'false') == 'false' -%}
url = https://$${request-frontend:connection-domain} url = https://$${request-frontend:connection-domain}
...@@ -672,6 +666,17 @@ mode = 700 ...@@ -672,6 +666,17 @@ mode = 700
context = context =
section slaprunner test-runner section slaprunner test-runner
[slapformat-definition.cfg]
recipe = slapos.recipe.template:jinja2
template = ${template-slapformat-definition.cfg:location}/${template-slapformat-definition.cfg:filename}
rendered = $${slaprunner:slapformat-definition.cfg}
mode = 700
context =
section slaprunner slaprunner
key partition_user user-info:pw-name
import codecs codecs
raw buildout_shared_part_list_dump $${slaprunner:buildout-shared-part-list-dump}
[shellinabox] [shellinabox]
recipe = slapos.recipe.template:jinja2 recipe = slapos.recipe.template:jinja2
# We cannot use slapos.cookbook:wrapper here because this recipe escapes too much # We cannot use slapos.cookbook:wrapper here because this recipe escapes too much
...@@ -785,6 +790,10 @@ slapproxy-autostart = true ...@@ -785,6 +790,10 @@ slapproxy-autostart = true
slapproxy-startsecs = 1 slapproxy-startsecs = 1
slapproxy-command = $${slaprunner:slapos} proxy start --logfile $${:slapproxy-log} --cfg $${:slapos-cfg} slapproxy-command = $${slaprunner:slapos} proxy start --logfile $${:slapproxy-log} --cfg $${:slapos-cfg}
slapproxy-log = $${directory:log}/slapproxy.log slapproxy-log = $${directory:log}/slapproxy.log
slapformat = slapformat
slapformat-command = $${slaprunner:slapos} node format --cfg $${:slapos-cfg} --verbose --logfile $${:slapformat-log} --now -i $${:slapformat-definition.cfg}
slapformat-log = $${directory:log}/slapos-node-format.log
slapformat-startretries = 0
socket_name = unix://$${:socket_path} socket_name = unix://$${:socket_path}
socket_path = $${directory:tmp}/supervisord.sock socket_path = $${directory:tmp}/supervisord.sock
startsecs = 0 startsecs = 0
...@@ -792,6 +801,7 @@ startsecs = 0 ...@@ -792,6 +801,7 @@ startsecs = 0
# Processes should handle their logs by themselves # Processes should handle their logs by themselves
stderr_logfile = $${directory:log}/supervisord-errors.log stderr_logfile = $${directory:log}/supervisord-errors.log
slapos-cfg = $${slaprunner:slapos.cfg} slapos-cfg = $${slaprunner:slapos.cfg}
slapformat-definition.cfg = $${slaprunner:slapformat-definition.cfg}
[supervisord-conf] [supervisord-conf]
recipe = slapos.recipe.template:jinja2 recipe = slapos.recipe.template:jinja2
......
...@@ -42,6 +42,7 @@ common-parts = ...@@ -42,6 +42,7 @@ common-parts =
instance-runner-import instance-runner-import
instance-runner-export instance-runner-export
template-slapos-cfg template-slapos-cfg
template-slapformat-definition.cfg
template-slapuser-script template-slapuser-script
# XXX: we have to manually add this for resilience # XXX: we have to manually add this for resilience
rdiff-backup rdiff-backup
...@@ -110,6 +111,10 @@ recipe = slapos.recipe.build:download ...@@ -110,6 +111,10 @@ recipe = slapos.recipe.build:download
< = template-download-base < = template-download-base
filename = slapos.cfg.in filename = slapos.cfg.in
[template-slapformat-definition.cfg]
< = template-download-base
filename = slapformat-definition.cfg.in
[template-parameters] [template-parameters]
< = download-only-base < = download-only-base
......
...@@ -173,7 +173,7 @@ if 1: ...@@ -173,7 +173,7 @@ if 1:
# We want to replace the last occurence only # We want to replace the last occurence only
old_software_release, partition = sys.argv[1], sys.argv[2] old_software_release, partition = sys.argv[1], sys.argv[2]
for match in re.finditer("(slappart|test0-)[0-9][0-9]*", old_software_release): for match in re.finditer("(slappart|test0-|s)[0-9][0-9]*", old_software_release):
start, end = match.start(), match.end() start, end = match.start(), match.end()
print old_software_release[:start] + partition + old_software_release[end:] print old_software_release[:start] + partition + old_software_release[end:]
......
[computer]
# Address example: 2001:67c:1254:27::1/ffff:ffff:ffff:ffff::/64
address = {{ slaprunner['ipv6'] }}/64
{% for partition_index in range(int(slaprunner['partition-amount'])) %}
[partition_{{ partition_index }}]
address = {{ slaprunner['ipv4'] }}/255.255.255.255 {{ slaprunner['ipv6'] }}/64
user = {{ partition_user }}
pathname = slappart{{ partition_index }}
network_interface =
{% endfor %}
...@@ -22,6 +22,11 @@ pidfile_instance = {{slaprunner['pidfile-instance']}} ...@@ -22,6 +22,11 @@ pidfile_instance = {{slaprunner['pidfile-instance']}}
[slapformat] [slapformat]
partition_amount = {{ slaprunner['partition-amount'] }} partition_amount = {{ slaprunner['partition-amount'] }}
alter_user = false
alter_network = false
create_tab = false
create_tun = false
computer_xml = {{ slaprunner['etc_dir'] }}/slapos.xml
[slaprunner] [slaprunner]
slapos = {{ slaprunner['slapos'] }} slapos = {{ slaprunner['slapos'] }}
......
...@@ -44,6 +44,20 @@ stderr_logfile = {{ supervisord['no_logfile'] }} ...@@ -44,6 +44,20 @@ stderr_logfile = {{ supervisord['no_logfile'] }}
directory = {{ supervisord['directory'] }} directory = {{ supervisord['directory'] }}
environment = PATH="{{- supervisord['path'] -}}" environment = PATH="{{- supervisord['path'] -}}"
[program:{{- supervisord['slapformat'] -}}]
command = {{ supervisord['slapformat-command'] }}
process_name = {{ supervisord['slapformat'] }}
numprocs = {{ supervisord['numprocs'] }}
autostart = {{ supervisord['autostart'] }}
exitcodes = {{ supervisord['exitcodes'] }}
startretries = {{ supervisord['slapformat-startretries'] }}
startsecs = {{ supervisord['startsecs'] }}
autorestart = {{ supervisord['autorestart'] }}
stdout_logfile = {{ supervisord['no_logfile'] }}
stderr_logfile = {{ supervisord['no_logfile'] }}
directory = {{ supervisord['directory'] }}
environment = PATH="{{- supervisord['path'] -}}"
[program:{{- supervisord['slapproxy'] -}}] [program:{{- supervisord['slapproxy'] -}}]
command = {{ supervisord['slapproxy-command'] }} command = {{ supervisord['slapproxy-command'] }}
process_name = {{ supervisord['slapproxy'] }} process_name = {{ supervisord['slapproxy'] }}
......
...@@ -49,7 +49,6 @@ setUpModule, SlapOSInstanceTestCase = makeModuleSetUpAndTestCaseClass( ...@@ -49,7 +49,6 @@ setUpModule, SlapOSInstanceTestCase = makeModuleSetUpAndTestCaseClass(
os.path.join(os.path.dirname(__file__), '..', os.path.join(os.path.dirname(__file__), '..',
'software%s.cfg' % ("-py3" if six.PY3 else "")))) 'software%s.cfg' % ("-py3" if six.PY3 else ""))))
class SlaprunnerTestCase(SlapOSInstanceTestCase): class SlaprunnerTestCase(SlapOSInstanceTestCase):
# Slaprunner uses unix sockets, so it needs short paths. # Slaprunner uses unix sockets, so it needs short paths.
__partition_reference__ = 's' __partition_reference__ = 's'
...@@ -106,26 +105,6 @@ class TestWeb(SlaprunnerTestCase): ...@@ -106,26 +105,6 @@ class TestWeb(SlaprunnerTestCase):
self.assertEqual(requests.codes.ok, hello.status_code) self.assertEqual(requests.codes.ok, hello.status_code)
self.assertIn('<b>Hello</b>', hello.text) self.assertIn('<b>Hello</b>', hello.text)
# git seems broken, these are 404 now...
@unittest.expectedFailure
def test_git_private(self):
parameter_dict = self.computer_partition.getConnectionParameterDict()
url = parameter_dict['git-private']
resp = requests.get(url, verify=False)
self.assertEqual(requests.codes.unauthorized, resp.status_code)
resp = requests.get(
url,
verify=False,
auth=(parameter_dict['init-user'], parameter_dict['init-password']))
self.assertEqual(requests.codes.ok, resp.status_code)
@unittest.expectedFailure
def test_git_public(self):
parameter_dict = self.computer_partition.getConnectionParameterDict()
url = parameter_dict['git-public']
resp = requests.get(url, verify=False)
self.assertEqual(requests.codes.ok, resp.status_code)
class TestSSH(SlaprunnerTestCase): class TestSSH(SlaprunnerTestCase):
@classmethod @classmethod
...@@ -275,6 +254,7 @@ class ServicesTestCase(SlaprunnerTestCase): ...@@ -275,6 +254,7 @@ class ServicesTestCase(SlaprunnerTestCase):
class TestInstanceResilient(SlaprunnerTestCase): class TestInstanceResilient(SlaprunnerTestCase):
instance_max_retry = 20 instance_max_retry = 20
@classmethod @classmethod
def getInstanceSoftwareType(cls): def getInstanceSoftwareType(cls):
return 'resilient' return 'resilient'
...@@ -287,8 +267,6 @@ class TestInstanceResilient(SlaprunnerTestCase): ...@@ -287,8 +267,6 @@ class TestInstanceResilient(SlaprunnerTestCase):
'backend-url', 'backend-url',
'feed-url-runner-1-pull', 'feed-url-runner-1-pull',
'feed-url-runner-1-push', 'feed-url-runner-1-push',
'git-private-url',
'git-public-url',
'init-password', 'init-password',
'init-user', 'init-user',
'monitor-base-url', 'monitor-base-url',
......
...@@ -6,11 +6,10 @@ extends = ...@@ -6,11 +6,10 @@ extends =
# ../../component/6tunnel/buildout.cfg # ../../component/6tunnel/buildout.cfg
../../component/socat/buildout.cfg ../../component/socat/buildout.cfg
../../stack/monitor/buildout.cfg ../../stack/monitor/buildout.cfg
../../stack/slapos.cfg
buildout.hash.cfg buildout.hash.cfg
parts += parts =
slapos-cookbook slapos-cookbook
coturn coturn
instance-cfg instance-cfg
......
...@@ -745,7 +745,6 @@ unidiff = 0.5.5 ...@@ -745,7 +745,6 @@ unidiff = 0.5.5
# Required by: # Required by:
# deepdiff = 3.3.0 # deepdiff = 3.3.0
jsonpickle = 0.9.6 jsonpickle = 0.9.6
decorator = 4.3.0
responses = 0.10.6 responses = 0.10.6
......
...@@ -32,13 +32,11 @@ extends = ...@@ -32,13 +32,11 @@ extends =
../../component/sqlite3/buildout.cfg ../../component/sqlite3/buildout.cfg
../../component/stunnel/buildout.cfg ../../component/stunnel/buildout.cfg
../../component/zlib/buildout.cfg ../../component/zlib/buildout.cfg
../erp5/buildout.cfg
../logrotate/buildout.cfg ../logrotate/buildout.cfg
../resilient/buildout.cfg ../resilient/buildout.cfg
../erp5/buildout.cfg
../../component/apache-php/buildout.cfg ../../component/apache-php/buildout.cfg
../slapos.cfg
[template-download-base] [template-download-base]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
...@@ -47,10 +45,6 @@ download-only = true ...@@ -47,10 +45,6 @@ download-only = true
url = ${:_profile_base_location_}/${:filename} url = ${:_profile_base_location_}/${:filename}
mode = 0644 mode = 0644
[mariadb]
# Compile dir is for plugins, there's no plugin in LAMP
keep-compile-dir = false
[application] [application]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
ignore-existing = true ignore-existing = true
...@@ -146,5 +140,3 @@ eggs = ...@@ -146,5 +140,3 @@ eggs =
${lxml-python:egg} ${lxml-python:egg}
${pycurl:egg} ${pycurl:egg}
slapos.toolbox slapos.toolbox
[versions]
...@@ -46,7 +46,7 @@ md5sum = d21472f0e58f928fb827f2cbf22c4d4a ...@@ -46,7 +46,7 @@ md5sum = d21472f0e58f928fb827f2cbf22c4d4a
[resilient-web-takeover-cgi-script-download] [resilient-web-takeover-cgi-script-download]
filename = resilient-web-takeover-cgi-script.py.in filename = resilient-web-takeover-cgi-script.py.in
md5sum = 7a0f1be7e9d05d0c68748322abe1f511 md5sum = 4137b7ac6b20a6cd897ad58f51a763b1
[template-wrapper] [template-wrapper]
filename = templates/wrapper.in filename = templates/wrapper.in
......
...@@ -48,7 +48,7 @@ def getLatestBackupDate(): ...@@ -48,7 +48,7 @@ def getLatestBackupDate():
if not db_keys: if not db_keys:
result = False result = False
else: else:
last_backup = db[db_keys[0]] last_backup = float(db[db_keys[0]])
for callback in db_keys: for callback in db_keys:
timestamp = float(db[callback]) timestamp = float(db[callback])
if timestamp > last_backup: if timestamp > last_backup:
......
...@@ -118,7 +118,7 @@ eggs = ...@@ -118,7 +118,7 @@ eggs =
[versions] [versions]
setuptools = 44.0.0 setuptools = 44.0.0
# Use SlapOS patched zc.buildout # Use SlapOS patched zc.buildout
zc.buildout = 2.7.1+slapos004 zc.buildout = 2.7.1+slapos006
# Use SlapOS patched zc.recipe.egg (zc.recipe.egg 2.x is for Buildout 2) # Use SlapOS patched zc.recipe.egg (zc.recipe.egg 2.x is for Buildout 2)
zc.recipe.egg = 2.0.3+slapos003 zc.recipe.egg = 2.0.3+slapos003
# Use own version of h.r.download to be able to open .xz and .lz archives # Use own version of h.r.download to be able to open .xz and .lz archives
...@@ -126,7 +126,7 @@ hexagonit.recipe.download = 1.7.post4 ...@@ -126,7 +126,7 @@ hexagonit.recipe.download = 1.7.post4
Jinja2 = 2.9.5 Jinja2 = 2.9.5
MarkupSafe = 1.0 MarkupSafe = 1.0
PyYAML = 3.12 PyYAML = 3.13
Werkzeug = 0.12 Werkzeug = 0.12
asn1crypto = 0.21.1 asn1crypto = 0.21.1
cffi = 1.9.1 cffi = 1.9.1
...@@ -136,12 +136,12 @@ cmd2 = 0.7.0 ...@@ -136,12 +136,12 @@ cmd2 = 0.7.0
collective.recipe.shelloutput = 0.1 collective.recipe.shelloutput = 0.1
collective.recipe.template = 2.0 collective.recipe.template = 2.0
cryptography = 2.3.1 cryptography = 2.3.1
decorator = 4.0.11 decorator = 4.3.0
idna = 2.2 idna = 2.2
inotify-simple = 1.1.1 inotify-simple = 1.1.1
itsdangerous = 0.24 itsdangerous = 0.24
lock-file = 2.0 lock-file = 2.0
lxml = 3.7.3 lxml = 4.4.3
meld3 = 1.0.2 meld3 = 1.0.2
netaddr = 0.7.19 netaddr = 0.7.19
pbr = 2.0.0 pbr = 2.0.0
......
...@@ -34,9 +34,6 @@ eggs = ...@@ -34,9 +34,6 @@ eggs =
${lxml-python:egg} ${lxml-python:egg}
${pycrypto-python:egg} ${pycrypto-python:egg}
[mariadb]
keep-compile-dir = false
[versions] [versions]
# Generated automatically by buildout-versions # Generated automatically by buildout-versions
async = 0.6.1 async = 0.6.1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment