Commit 350ab63e authored by Tristan Cavelier's avatar Tristan Cavelier Committed by Xiaowu Zhang

stack/erp5: remove cloudooo

more discussion at !266
parent eb2a4161
...@@ -14,9 +14,8 @@ front-end instance which is expected to contains the RewriteRules_ (or ...@@ -14,9 +14,8 @@ front-end instance which is expected to contains the RewriteRules_ (or
equivalent) needed to relocate Zope's urls via its VirtualHostMonster_. See the equivalent) needed to relocate Zope's urls via its VirtualHostMonster_. See the
``frontend`` erp5 instance parameter. ``frontend`` erp5 instance parameter.
Included cloudooo partition is **deprecated**. It is not recommended for ERP5 defaults connect to the public cloudooo on https://cloudooo.erp5.net/.
intensive usage. See the ``cloudooo`` Software Release to setup a cloudooo See the ``cloudooo`` Software Release to setup a cloudooo cluster if necessary.
cluster, more suitable for intensive usage.
Replication Replication
=========== ===========
...@@ -84,7 +83,6 @@ This software release assigns the following port ranges by default: ...@@ -84,7 +83,6 @@ This software release assigns the following port ranges by default:
==================== ========== ==================== ==========
memcached-persistent 2000-2009 memcached-persistent 2000-2009
memcached-volatile 2010-2019 memcached-volatile 2010-2019
cloudooo 2020-2024
smtp 2025-2029 smtp 2025-2029
neo (admin & master) 2050-2051 neo (admin & master) 2050-2051
mariadb 2099 mariadb 2099
......
{
"$schema": "http://json-schema.org/draft-04/schema#",
"required": ["tcpv4-port"],
"properties": {
"tcpv4-port": {
"allOf": [{
"$ref": "#/definitions/tcpv4port"
}, {
"description": "Start allocating ports at this value, going upward"
}]
}
}
}
...@@ -187,12 +187,10 @@ ...@@ -187,12 +187,10 @@
}, },
"type": "object" "type": "object"
}, },
"cloudooo": { "cloudooo-url": {
"description": "Format conversion service", "description": "Format conversion service URL",
"additionalProperties": { "pattern": "^https?://",
"$ref": "./instance-cloudooo-schema.json#/properties" "type": "string"
},
"type": "object"
}, },
"cloudooo-retry-count": { "cloudooo-retry-count": {
"description": "Define retry count for cloudooo in network error case in test", "description": "Define retry count for cloudooo in network error case in test",
......
...@@ -39,11 +39,6 @@ ...@@ -39,11 +39,6 @@
"pattern": "^memcached://", "pattern": "^memcached://",
"type": "string" "type": "string"
}, },
"cloudooo-url": {
"description": "Conversion service access information - DEPRECATED",
"pattern": "^(http|https)://",
"type": "string"
},
"mariadb-database-list": { "mariadb-database-list": {
"description": "Relational database access information", "description": "Relational database access information",
"items": { "items": {
......
...@@ -24,7 +24,6 @@ extends = ...@@ -24,7 +24,6 @@ extends =
../../component/libdmtx/buildout.cfg ../../component/libdmtx/buildout.cfg
../../component/libffi/buildout.cfg ../../component/libffi/buildout.cfg
../../component/libpng/buildout.cfg ../../component/libpng/buildout.cfg
../../component/libreoffice-bin/buildout.cfg
../../component/matplotlib/buildout.cfg ../../component/matplotlib/buildout.cfg
../../component/mesa/buildout.cfg ../../component/mesa/buildout.cfg
../../component/numpy/buildout.cfg ../../component/numpy/buildout.cfg
...@@ -46,7 +45,6 @@ extends = ...@@ -46,7 +45,6 @@ extends =
../../component/tesseract/buildout.cfg ../../component/tesseract/buildout.cfg
../../component/w3-validator/buildout.cfg ../../component/w3-validator/buildout.cfg
../../component/w3m/buildout.cfg ../../component/w3m/buildout.cfg
../../component/wkhtmltopdf/buildout.cfg
../../component/xorg/buildout.cfg ../../component/xorg/buildout.cfg
../../component/poppler/buildout.cfg ../../component/poppler/buildout.cfg
../../component/zabbix/buildout.cfg ../../component/zabbix/buildout.cfg
...@@ -57,7 +55,6 @@ extends = ...@@ -57,7 +55,6 @@ extends =
../../component/bash/buildout.cfg ../../component/bash/buildout.cfg
../../component/wget/buildout.cfg ../../component/wget/buildout.cfg
../../component/aspell/buildout.cfg ../../component/aspell/buildout.cfg
../../component/cloudooo/buildout.cfg
../../component/jsl/buildout.cfg ../../component/jsl/buildout.cfg
../../component/6tunnel/buildout.cfg ../../component/6tunnel/buildout.cfg
../../component/findutils/buildout.cfg ../../component/findutils/buildout.cfg
...@@ -94,7 +91,6 @@ parts += ...@@ -94,7 +91,6 @@ parts +=
libdmtx libdmtx
dmtx-utils dmtx-utils
kumo kumo
libreoffice-bin
w3-validator w3-validator
tesseract tesseract
scipy scipy
...@@ -128,9 +124,6 @@ parts += ...@@ -128,9 +124,6 @@ parts +=
ocrb-fonts ocrb-fonts
android-fonts android-fonts
# Cloudooo specific part
cloudooo-develop
cloudooo
# get git repositories # get git repositories
erp5 erp5
...@@ -197,9 +190,6 @@ link-binary = ...@@ -197,9 +190,6 @@ link-binary =
[template-kumofs] [template-kumofs]
<= download-base <= download-base
[template-cloudooo]
<= download-base
[template-zope-conf] [template-zope-conf]
<= download-base <= download-base
...@@ -248,6 +238,7 @@ context = ...@@ -248,6 +238,7 @@ context =
key dbus_glib_location dbus-glib:location key dbus_glib_location dbus-glib:location
key dbus_location dbus:location key dbus_location dbus:location
key dcron_location dcron:location key dcron_location dcron:location
key default_cloudooo_url erp5-defaults:cloudooo-connection-url
key erp5_location erp5:location key erp5_location erp5:location
key file_location file:location key file_location file:location
key findutils_location findutils:location key findutils_location findutils:location
...@@ -273,7 +264,6 @@ context = ...@@ -273,7 +264,6 @@ context =
key libexpat_location libexpat:location key libexpat_location libexpat:location
key libffi_location libffi:location key libffi_location libffi:location
key libpng12_location libpng12:location key libpng12_location libpng12:location
key libreoffice_bin_location libreoffice-bin:location
key librsvg_location librsvg:location key librsvg_location librsvg:location
key libxcb_location libxcb:location key libxcb_location libxcb:location
key local_bt5_repository local-bt5-repository:list key local_bt5_repository local-bt5-repository:list
...@@ -297,7 +287,6 @@ context = ...@@ -297,7 +287,6 @@ context =
key stunnel_location stunnel:location key stunnel_location stunnel:location
key template_apache_conf template-apache-backend-conf:target key template_apache_conf template-apache-backend-conf:target
key template_balancer template-balancer:target key template_balancer template-balancer:target
key template_cloudooo template-cloudooo:target
key template_erp5 template-erp5:target key template_erp5 template-erp5:target
key template_haproxy_cfg template-haproxy-cfg:target key template_haproxy_cfg template-haproxy-cfg:target
key template_jupyter_cfg instance-jupyter-notebook:rendered key template_jupyter_cfg instance-jupyter-notebook:rendered
...@@ -315,10 +304,8 @@ context = ...@@ -315,10 +304,8 @@ context =
key template_zope_conf template-zope-conf:target key template_zope_conf template-zope-conf:target
key userhosts_location userhosts:location key userhosts_location userhosts:location
key wget_location wget:location key wget_location wget:location
key wkhtmltopdf_location wkhtmltopdf:location
key xdamage_location xdamage:location key xdamage_location xdamage:location
key xfixes_location xfixes:location key xfixes_location xfixes:location
key xserver_location xserver:location
key zlib_location zlib:location key zlib_location zlib:location
key extra_path_list eggs:extra-paths key extra_path_list eggs:extra-paths
...@@ -382,6 +369,7 @@ repository_id_list = erp5 ...@@ -382,6 +369,7 @@ repository_id_list = erp5
# ERP5 defaults, which can be overridden in inheriting recipes (e.g. wendelin) # ERP5 defaults, which can be overridden in inheriting recipes (e.g. wendelin)
[erp5-defaults] [erp5-defaults]
cloudooo-connection-url = https://cloudooo.erp5.net/
# Jupyter is by default disabled in ERP5 # Jupyter is by default disabled in ERP5
jupyter-enable-default = false jupyter-enable-default = false
......
...@@ -33,10 +33,6 @@ md5sum = e731fa1d24fc87b26efdbcb40d74c55d ...@@ -33,10 +33,6 @@ md5sum = e731fa1d24fc87b26efdbcb40d74c55d
filename = instance-kumofs.cfg.in filename = instance-kumofs.cfg.in
md5sum = 091d3c3feb2d543d176b0fadb11c07dc md5sum = 091d3c3feb2d543d176b0fadb11c07dc
[template-cloudooo]
filename = instance-cloudoo.cfg.in
md5sum = eeb584a393b15582a3be6b591dcdcde6
[template-zope-conf] [template-zope-conf]
filename = zope.conf.in filename = zope.conf.in
md5sum = adb25a1ab15c8aecf40a3952528f81c2 md5sum = adb25a1ab15c8aecf40a3952528f81c2
...@@ -71,7 +67,7 @@ md5sum = 0969fbb25b05c02ef3c2d437b2f4e1a0 ...@@ -71,7 +67,7 @@ md5sum = 0969fbb25b05c02ef3c2d437b2f4e1a0
[template] [template]
filename = instance.cfg.in filename = instance.cfg.in
md5sum = eba0b4596484dcf24b1da29ddeac453d md5sum = 7a0565e140cd79e9c0565c71e6d375f8
[monitor-template-dummy] [monitor-template-dummy]
filename = dummy.cfg filename = dummy.cfg
...@@ -79,7 +75,7 @@ md5sum = d41d8cd98f00b204e9800998ecf8427e ...@@ -79,7 +75,7 @@ md5sum = d41d8cd98f00b204e9800998ecf8427e
[template-erp5] [template-erp5]
filename = instance-erp5.cfg.in filename = instance-erp5.cfg.in
md5sum = 2431422c66082a6fb6a6be236ebacd5c md5sum = 9f8851af5faed9d1e346d7dbe0e6db5d
[template-zeo] [template-zeo]
filename = instance-zeo.cfg.in filename = instance-zeo.cfg.in
......
{% set bin_directory = parameter_dict['buildout-bin-directory'] -%}
{% set use_ipv6 = slapparameter_dict.get('use-ipv6', False) -%}
[buildout]
extends =
{{ parameter_dict['template-monitor'] }}
parts +=
publish
cloudooo-instance
resiliency-exclude-file
promise
promise-openoffice
{% if use_ipv6 %}promise-tunnel{% endif %}
xvfb-instance
wkhtmltopdf-on-xvfb
[publish]
recipe = slapos.cookbook:publish.serialised
{% if use_ipv6 -%}
url = http://[${ipv6toipv4:ipv6}]:${ipv6toipv4:ipv6-port}/
{% else -%}
url = http://${cloudooo-instance:ip}:${cloudooo-instance:port}/
{% endif -%}
monitor-base-url = ${monitor-publish-parameters:monitor-base-url}
[cloudooo-instance]
recipe = slapos.cookbook:generic.cloudooo
# Network options
ip = {{ (ipv4_set | list)[0] }}
{% set tcpv4_port = slapparameter_dict['tcpv4-port'] -%}
port = {{ tcpv4_port }}
openoffice-port = {{ tcpv4_port + 1 }}
# Paths
configuration-file = ${directory:etc}/cloudooo.cfg
wrapper = ${directory:service}/cloudooo
# Paths: Data
data-directory = ${directory:cloudooo-data}
environment =
LD_LIBRARY_PATH = {{ parameter_dict['cairo'] }}/lib:{{ parameter_dict['cups'] }}/lib:{{ parameter_dict['cups'] }}/lib64:{{ parameter_dict['dbus'] }}/lib:{{ parameter_dict['dbus-glib'] }}/lib:{{ parameter_dict['file'] }}/lib:{{ parameter_dict['fontconfig'] }}/lib:{{ parameter_dict['freetype'] }}/lib:{{ parameter_dict['glib'] }}/lib:{{ parameter_dict['glu'] }}/lib:{{ parameter_dict['libICE'] }}/lib:{{ parameter_dict['libSM'] }}/lib:{{ parameter_dict['libX11'] }}/lib:{{ parameter_dict['libXau'] }}/lib:{{ parameter_dict['libXdmcp'] }}/lib:{{ parameter_dict['libXext'] }}/lib:{{ parameter_dict['libXrender'] }}/lib:{{ parameter_dict['libexpat'] }}/lib:{{ parameter_dict['libffi'] }}/lib:{{ parameter_dict['libffi'] }}/lib64:{{ parameter_dict['libpng12'] }}/lib:{{ parameter_dict['libxcb'] }}/lib:{{ parameter_dict['mesa'] }}/lib:{{ parameter_dict['pixman'] }}/lib:{{ parameter_dict['xdamage'] }}/lib:{{ parameter_dict['xfixes'] }}/lib:{{ parameter_dict['zlib'] }}/lib
FONTCONFIG_FILE = ${fontconfig-instance:conf-path}
PATH = ${binary-link:target-directory}
# Binary information
# cloudooo specific configuration
ooo-binary-path = {{ parameter_dict['libreoffice-bin'] }}/program
ooo-paster = {{ bin_directory }}/cloudooo_paster
ooo-uno-path = {{ parameter_dict['libreoffice-bin'] }}/basis-link/program
[fontconfig-instance]
recipe = slapos.cookbook:fontconfig
conf-path = ${directory:etc}/font.conf
font-system-folder = {{ parameter_dict['fonts'] }}
font-folder = ${directory:font}
service-folder = ${directory:service}
[resiliency-exclude-file]
# Generate rdiff exclude file in case of resiliency
recipe = slapos.recipe.template:jinja2
mode = 644
template = {{ 'inline:{{ "**\\n" }}' }}
rendered = ${directory:srv}/exporter.exclude
[promise]
recipe = slapos.cookbook:check_port_listening
path = ${directory:promise}/cloudooo
hostname = ${cloudooo-instance:ip}
port = ${cloudooo-instance:port}
[promise-openoffice]
recipe = slapos.cookbook:check_port_listening
path = ${directory:promise}/openoffice
hostname = ${cloudooo-instance:ip}
port = ${cloudooo-instance:openoffice-port}
{% if use_ipv6 -%}
[promise-tunnel]
recipe = slapos.cookbook:check_port_listening
path = ${directory:promise}/tunnel
hostname = ${ipv6toipv4:ipv6}
port = ${ipv6toipv4:ipv6-port}
[ipv6toipv4]
recipe = slapos.cookbook:ipv6toipv4
runner-path = ${directory:service}/${:base-name}
6tunnel-path = {{ parameter_dict['6tunnel'] }}/bin/6tunnel
shell-path = {{ parameter_dict['dash'] }}/bin/dash
ipv4 = ${cloudooo-instance:ip}
ipv6 = {{ (ipv6_set | list)[0] }}
ipv6-port = ${cloudooo-instance:port}
ipv4-port = ${cloudooo-instance:port}
base-name = cloudooo-tunnel
{% endif -%}
# rest of parts are candidates for some generic stuff
[directory]
recipe = slapos.cookbook:mkdirectory
bin = ${buildout:directory}/bin
etc = ${buildout:directory}/etc
srv = ${buildout:directory}/srv
var = ${buildout:directory}/var
run = ${:var}/run
service = ${:etc}/run
promise = ${:etc}/promise
cloudooo-data = ${:srv}/cloudooo
font = ${:srv}/font
framebuffer = ${:srv}/framebuffer
[monitor-instance-parameter]
monitor-httpd-ipv6 = {{ (ipv6_set | list)[0] }}
monitor-httpd-port = {{ tcpv4_port + 2 }}
monitor-title = {{ slapparameter_dict['name'] }}
password = {{ slapparameter_dict['monitor-passwd'] }}
[binary-link]
recipe = slapos.cookbook:symbolic.link
target-directory = ${directory:bin}
link-binary =
{{ parameter_dict['coreutils'] }}/bin/basename
{{ parameter_dict['coreutils'] }}/bin/cat
{{ parameter_dict['coreutils'] }}/bin/cp
{{ parameter_dict['coreutils'] }}/bin/ls
{{ parameter_dict['coreutils'] }}/bin/tr
{{ parameter_dict['coreutils'] }}/bin/uname
{{ parameter_dict['coreutils'] }}/bin/dirname
# wrapper recipe needs the head command
{{ parameter_dict['coreutils'] }}/bin/head
{{ parameter_dict['imagemagick'] }}/bin/convert
{{ parameter_dict['imagemagick'] }}/bin/identify
{{ parameter_dict['poppler'] }}/bin/pdfinfo
{{ parameter_dict['poppler'] }}/bin/pdftotext
{{ parameter_dict['poppler'] }}/bin/pdftohtml
{{ parameter_dict['onlyoffice-core'] }}/bin/x2t
[xvfb-instance]
recipe = slapos.cookbook:xvfb
runner-path = ${directory:service}/xvfb
xvfb-path = {{ parameter_dict["xserver"] }}/bin/Xvfb
fbdir-path = ${directory:framebuffer}
tmp-path = ${directory:run}
shell-path = {{ parameter_dict["dash"] }}/bin/dash
[wkhtmltopdf-on-xvfb]
recipe = slapos.cookbook:wrapper
wrapper-path = ${directory:bin}/wkhtmltopdf
environment =
DISPLAY=:0
TMPDIR=${directory:run}
command-line = {{ parameter_dict['wkhtmltopdf'] }}/wkhtmltopdf --use-xserver
...@@ -44,7 +44,6 @@ config-name = {{ name }} ...@@ -44,7 +44,6 @@ config-name = {{ name }}
{{ request('memcached-persistent', 'kumofs', 'kumofs', {'tcpv4-port': 2000}, {'url': True, 'monitor-base-url': False}, key_config={'monitor-passwd': 'monitor-htpasswd:passwd'}) }} {{ request('memcached-persistent', 'kumofs', 'kumofs', {'tcpv4-port': 2000}, {'url': True, 'monitor-base-url': False}, key_config={'monitor-passwd': 'monitor-htpasswd:passwd'}) }}
{{ request('memcached-volatile', 'kumofs', 'memcached', {'tcpv4-port': 2010, 'ram-storage-size': 64}, {'url': True, 'monitor-base-url': False}, key_config={'monitor-passwd': 'monitor-htpasswd:passwd'}) }} {{ request('memcached-volatile', 'kumofs', 'memcached', {'tcpv4-port': 2010, 'ram-storage-size': 64}, {'url': True, 'monitor-base-url': False}, key_config={'monitor-passwd': 'monitor-htpasswd:passwd'}) }}
{{ request('cloudooo', 'cloudooo', 'cloudooo', {'tcpv4-port': 2020}, {'url': True, 'monitor-base-url': False}, key_config={'monitor-passwd': 'monitor-htpasswd:passwd'}) }}
{{ request('mariadb', 'mariadb', 'mariadb', {'tcpv4-port': 2099, 'max-slowqueries-threshold': monitor_dict.get('max-slowqueries-threshold', 1000), 'slowest-query-threshold': monitor_dict.get('slowest-query-threshold', '') }, {'database-list': True, 'test-database-list': True, 'monitor-base-url': False}, key_config={'monitor-passwd': 'monitor-htpasswd:passwd'}) }} {{ request('mariadb', 'mariadb', 'mariadb', {'tcpv4-port': 2099, 'max-slowqueries-threshold': monitor_dict.get('max-slowqueries-threshold', 1000), 'slowest-query-threshold': monitor_dict.get('slowest-query-threshold', '') }, {'database-list': True, 'test-database-list': True, 'monitor-base-url': False}, key_config={'monitor-passwd': 'monitor-htpasswd:passwd'}) }}
{% if has_posftix -%} {% if has_posftix -%}
{{ request('smtp', 'postfix', 'smtp', {'tcpv4-port': 2025, 'smtpd-sasl-user': 'erp5@nowhere'}, key_config={'smtpd-sasl-password': 'publish-early:smtpd-sasl-password'}) }} {{ request('smtp', 'postfix', 'smtp', {'tcpv4-port': 2025, 'smtpd-sasl-user': 'erp5@nowhere'}, key_config={'smtpd-sasl-password': 'publish-early:smtpd-sasl-password'}) }}
...@@ -150,7 +149,7 @@ return = ...@@ -150,7 +149,7 @@ return =
config-bt5 = {{ dumps(slapparameter_dict.get('bt5', bt5_default_list)) }} config-bt5 = {{ dumps(slapparameter_dict.get('bt5', bt5_default_list)) }}
config-bt5-repository-url = {{ dumps(slapparameter_dict.get('bt5-repository-url', local_bt5_repository)) }} config-bt5-repository-url = {{ dumps(slapparameter_dict.get('bt5-repository-url', local_bt5_repository)) }}
config-caucase-url = ${request-caucase:connection-http-url} config-caucase-url = ${request-caucase:connection-http-url}
config-cloudooo-url = ${request-cloudooo:connection-url} config-cloudooo-url = {{ dumps(slapparameter_dict.get('cloudooo-url', default_cloudooo_url)) }}
config-deadlock-debugger-password = ${publish-early:deadlock-debugger-password} config-deadlock-debugger-password = ${publish-early:deadlock-debugger-password}
config-developer-list = {{ dumps(slapparameter_dict.get('developer-list', [inituser_login])) }} config-developer-list = {{ dumps(slapparameter_dict.get('developer-list', [inituser_login])) }}
config-hosts-dict = {{ dumps(slapparameter_dict.get('hosts-dict', {})) }} config-hosts-dict = {{ dumps(slapparameter_dict.get('hosts-dict', {})) }}
......
...@@ -6,52 +6,6 @@ extends = ...@@ -6,52 +6,6 @@ extends =
[jinja2-template-base] [jinja2-template-base]
mode = 644 mode = 644
[dynamic-template-cloudooo-parameters]
cairo = {{ cairo_location }}
coreutils = {{ dumps(coreutils_location) }}
cups = {{ cups_location }}
dbus = {{ dbus_location }}
dbus-glib = {{ dbus_glib_location }}
file = {{ file_location }}
fontconfig = {{ fontconfig_location }}
freetype = {{ freetype_location }}
glib = {{ glib_location }}
glu = {{ glu_location }}
imagemagick = {{ dumps(imagemagick_location) }}
libICE = {{ libICE_location }}
libSM = {{ libSM_location }}
libX11 = {{ libX11_location }}
libXau = {{ libXau_location }}
libXdmcp = {{ libXdmcp_location }}
libXext = {{ libXext_location }}
libXrender = {{ libXrender_location }}
libexpat = {{ libexpat_location }}
libffi = {{ libffi_location }}
libpng12 = {{ libpng12_location }}
libxcb = {{ libxcb_location }}
mesa = {{ mesa_location }}
onlyoffice-core = {{ dumps(onlyoffice_core_location) }}
pixman = {{ pixman_location }}
poppler = {{ dumps(poppler_location) }}
wkhtmltopdf = {{ dumps(wkhtmltopdf_location) }}
xdamage = {{ xdamage_location }}
xfixes = {{ xfixes_location }}
xserver = {{ dumps(xserver_location) }}
zlib = {{ zlib_location }}
libreoffice-bin = {{ libreoffice_bin_location }}
fonts = {{ fonts_location }}
buildout-bin-directory = {{ buildout_bin_directory }}
6tunnel = {{ sixtunnel_location }}
dash = {{ dash_location }}
template-monitor = {{ dumps(template_monitor) }}
[dynamic-template-cloudooo]
<= jinja2-template-base
template = {{ template_cloudooo }}
filename = instance-cloudoo.cfg
extra-context =
section parameter_dict dynamic-template-cloudooo-parameters
[dynamic-template-postfix-parameters] [dynamic-template-postfix-parameters]
bin-directory = {{ bin_directory }} bin-directory = {{ bin_directory }}
buildout-bin-directory = {{ buildout_bin_directory }} buildout-bin-directory = {{ buildout_bin_directory }}
...@@ -72,6 +26,7 @@ extra-context = ...@@ -72,6 +26,7 @@ extra-context =
import urllib urllib import urllib urllib
[dynamic-template-erp5-parameters] [dynamic-template-erp5-parameters]
default-cloudooo-url = {{ dumps(default_cloudooo_url) }}
jupyter-enable-default = {{ jupyter_enable_default }} jupyter-enable-default = {{ jupyter_enable_default }}
local-bt5-repository = {{ ' '.join(local_bt5_repository.split()) }} local-bt5-repository = {{ ' '.join(local_bt5_repository.split()) }}
template-monitor = {{ dumps(template_monitor) }} template-monitor = {{ dumps(template_monitor) }}
...@@ -81,6 +36,7 @@ template-monitor = {{ dumps(template_monitor) }} ...@@ -81,6 +36,7 @@ template-monitor = {{ dumps(template_monitor) }}
template = {{ template_erp5 }} template = {{ template_erp5 }}
filename = instance-erp5.cfg filename = instance-erp5.cfg
extra-context = extra-context =
key default_cloudooo_url dynamic-template-erp5-parameters:default-cloudooo-url
key jupyter_enable_default dynamic-template-erp5-parameters:jupyter-enable-default key jupyter_enable_default dynamic-template-erp5-parameters:jupyter-enable-default
key local_bt5_repository dynamic-template-erp5-parameters:local-bt5-repository key local_bt5_repository dynamic-template-erp5-parameters:local-bt5-repository
key template_monitor dynamic-template-erp5-parameters:template-monitor key template_monitor dynamic-template-erp5-parameters:template-monitor
...@@ -207,7 +163,6 @@ RootSoftwareInstance = ${:default} ...@@ -207,7 +163,6 @@ RootSoftwareInstance = ${:default}
# Internal software types # Internal software types
kumofs = dynamic-template-kumofs:rendered kumofs = dynamic-template-kumofs:rendered
caucase = dynamic-template-caucase:rendered caucase = dynamic-template-caucase:rendered
cloudooo = dynamic-template-cloudooo:rendered
mariadb = dynamic-template-mariadb:rendered mariadb = dynamic-template-mariadb:rendered
balancer = dynamic-template-balancer:rendered balancer = dynamic-template-balancer:rendered
postfix = dynamic-template-postfix:rendered postfix = dynamic-template-postfix:rendered
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment