Rewrite of re6st-node packaging

- With a Makefile instead of a shell script to make build files,
  it's easier to only redo the necessary parts.
- Do not bootstrap buildout in advance. This caused build failures on old
  dists when this was done with Python 2.7 (parts/buildout/site.py imported
  a module that does not exist on Python 2.6). Now everything can be prepared
  on a recent dist.
- Minimize list of build-deps. We don't need setuptools anymore.
  We also don't rely on system chrpath anymore because SLE_12 does not have it.
- Refactoring with upstream packaging.
- Debian: fix upgrade path from 're6stnet' package.
- Package re6st manpages and logrotate configuration.
- systemd integration on RPM-based dists.
- Fix shebang of OpenVPN/NetworkManager hooks.
- Do never ship *.py[co] files in packages. Remove them on uninstallation
  (not done yet for Arch).
- chrpath: Suse dists use RUNPATH instead of PATH
- Stop stripping ELF files.
- Greatly reduce size of packages by removing eggs/parts that were only useful
  during the build, like Perl.

TODO: integrate with osc working copy ?

For the record, here is an example to strip ELF files:

strip:
	cd $(DESTDIR)/$(TARGET) \
	&& s() { chmod u+w $$x && strip -v -R .comment -R .note "$$@" $$x; } \
	&& x=`find -type f -executable ! -name '*.so*' |xargs -r file | \
		sed -n 's/:.*ELF.*\(executable\|shared\).*//p'` && s \
	&& x=`find -type f -name '*.so*' |xargs -r file | \
		sed -n 's/:.*ELF.*shared.*//p'` && s --strip-unneeded

.gitignore

@@ -2,8 +2,7 @@ obs/*/home:VIFIBnexedi*
 obs/slapos/slapos-node_*
 obs/slapos/slapos-recipe-version
 obs/slapos/slapos-version
-obs/re6st/re6st-node_*
-obs/*/templates/debian.tar.gz
+debian.tar.gz
 obs/slapos/templates/debian/cron.d
 obs/slapos/templates/debian/slapos-node.logrotate
 debian-preseed/*.iso
@@ -13,6 +12,6 @@ slapprepare/dist
 slapprepare/slapprepare.egg-info
 *.egg-info
 .*.swp
-build
+build/
 dist
 playbook/install

obs/re6st/.gitignore

+/re6stnet/
+/slapos/
+/upstream.mk
+/re6st-node_*.tar.gz
+/re6st-node_*.dsc
+/debian/control
+/debian/changelog
+/re6stnet.spec
+/PKGBUILD

obs/re6st/Makefile

+# This file doesn't force specific versions of re6stnet or slapos.
+# It automatically clones missing repositories but doesn't automatically pull.
+# You have to choose by using git manually.
+
+# Run with SLAPOS_EPOCH=<N> (where <N> is an integer > 1)
+# if rebuilding for new SlapOS version but same re6stnet.
+
+# Non-obvious dependencies:
+# - Debian: python-debian, python-docutils | python3-docutils
+# We could avoid them by doing like for setuptools, but I'd rather go the
+# opposite way: simplify the upload part by using the system setuptools and
+# recent features from Make 4.
+
+# This Makefile tries to be smart by only rebuilding the necessary parts after
+# some change. But as always, it does not handle all cases, so once everything
+# works, you should clean up everything before the final prepare+upload.
+
+# TODO:
+# - Arch probably needs clean up of *.py[co] files on uninstallation.
+#   This is done already for DEB/RPM.
+# - RPM: automatic deps to system libraries.
+# - Each built package should have its own dist version (something like
+#   -<dist-name><dist-version> suffix), at least to know which one is installed
+#   after a dist upgrade.
+#   On the other side, Debian should normally suggest to reinstall because
+#   package metadata usually differ (e.g. installed size or dependencies), even
+#   if there's nothing like checksum comparisons. Maybe other dists do as well.
+# - Split tarball in several parts (for Debian, this is doable with
+#   "debtransform" tag):
+#   - 1 file for each one in download-cache
+#   - 1 tarball with everything else
+#   For faster release after re6st development, an intermediate split could be:
+#   - re6stnet sdist
+#   - a tarball of remaining download-cache
+#   - 1 tarball with everything else
+# - Make tarballs "reproducible". If the contents does not change, and we don't
+#   really care about modification times, the result should always be the same.
+#   It's really annoying that we can't rely on 'osc status' to know whether
+#   there are real changes or not. 2 ways:
+#   - This is doable with a very recent of tar (not even in Jessie), in order
+#     to sort files by name (--sort option). Then there are timestamps:
+#     see -n option of gzip, and --mtime option of tar.
+#   - But the best one is probably to use Python instead of tar+gzip.
+#     And in fact, such Python script should not be limited to that, since many
+#     intermediate files like re6stnet.spec are so quick to generate that they
+#     should be produced in RAM.
+#
+# Note that package don't contain *.py[co] files and they're not generated
+# at installation. For this package, it's better like this because it minimizes
+# disk usage without slowness (executables are either daemons or run as root).
+# If this way of packaging is reused for other software, postinst scripts
+# should be implemented.
+
+BOOTSTRAP_URL = http://downloads.buildout.org/1/bootstrap.py
+RE6STNET_URL = http://git.erp5.org/repos/re6stnet.git
+SLAPOS_URL = http://git.erp5.org/repos/slapos.git
+
+PACKAGE = re6st-node
+BIN = re6st-conf re6st-registry re6stnet
+NOPART = chrpath flex glib lunzip m4 patch perl popt site_perl xz-utils
+TARGET = opt/re6st
+
+ROOT = build
+BUILD = $(ROOT)/$(TARGET)
+
+BUILD_KEEP = buildout.cfg extends-cache download-cache
+
+all: tarball debian.tar.gz re6stnet.spec PKGBUILD re6stnet.install
+
+re6stnet:
+	git clone $(RE6STNET_URL) $@
+
+slapos:
+	git clone $(SLAPOS_URL) $@
+
+$(BUILD)/buildout.cfg: buildout.cfg.in
+	mkdir -p $(@D)
+	python2 -c 'import os; cfg = open("$<").read() % dict( \
+		SLAPOS="$(CURDIR)/slapos", ROOT="$${buildout:directory}/" \
+			+ os.path.relpath("$(ROOT)", "$(BUILD)"), \
+		TARGET="/$(TARGET)"); open("$@", "w").write(cfg)'
+
+$(BUILD)/bin/python: $(BUILD)/buildout.cfg slapos
+	if [ -e $@ ]; then touch $@; else cd $(BUILD) \
+	&& rm -rf extends-cache && mkdir -p download-cache extends-cache \
+	&& wget -qO - $(BOOTSTRAP_URL) | python2 -S \
+	&& bin/buildout buildout:parts=$(@F); fi
+
+re6stnet/re6stnet.egg-info: $(BUILD)/bin/python re6stnet
+	rm -f $(BUILD)/download-cache/dist/re6stnet-*
+	cd re6stnet && ../$< setup.py sdist -d ../$(BUILD)/download-cache/dist
+	# Touch target because the current directory is used as temporary
+	# storage, and it is cleaned up after that setup.py runs egg_info.
+	touch $@
+
+$(BUILD)/.installed.cfg: re6stnet/re6stnet.egg-info
+	cd $(BUILD) && bin/buildout
+	# Touch target in case that buildout had nothing to do.
+	touch $@
+
+$(ROOT)/Makefile: Makefile.in Makefile
+	($(foreach x,BIN NOPART BUILD_KEEP TARGET, \
+	echo $(x) = $($(x)) &&) cat $<) > $@
+
+prepare: $(BUILD)/.installed.cfg $(ROOT)/Makefile
+	$(eval VERSION = $(shell cd $(BUILD)/download-cache/dist \
+	&& set re6stnet-* && set $${1#*-} \
+	&& echo -n $${1%.tar.*}+slapos$(SLAPOS_EPOCH).g \
+	&& cd $(CURDIR)/slapos && git rev-parse --short HEAD))
+	make -C re6stnet
+
+upstream.mk: re6stnet Makefile
+	(echo 'override PYTHON = /$(TARGET)/parts/python2.7/bin/python' \
+	&& cat $</Makefile) > $@
+
+tarball: upstream.mk prepare
+	tar -caf $(PACKAGE)_$(VERSION).tar.gz \
+		--xform s,^re6stnet/,, \
+		--xform s,^,$(PACKAGE)-$(VERSION)/, \
+		cleanup install-eggs rebootstrap $< \
+		re6stnet/daemon re6stnet/docs/*.1 re6stnet/docs/*.8 \
+		-C $(ROOT) Makefile $(patsubst %,$(TARGET)/%,$(BUILD_KEEP))
+
+debian/changelog: prepare
+	cd re6stnet && sed s,$@,../$@, debian/common.mk | \
+	make -f - PACKAGE=$(PACKAGE) VERSION=$(VERSION) ../$@
+
+debian/control: debian/source/format prepare Makefile
+	$(eval DSC = $(PACKAGE)_$(VERSION).dsc)
+	python2 -c 'from debian.deb822 import Deb822; d = Deb822(); \
+		b = open("re6stnet/$@"); s = Deb822(b); b = Deb822(b); \
+		d["Format"] = open("$<").read().strip(); \
+		d["Source"] = s["Source"] = b["Package"] = "$(PACKAGE)"; \
+		d["Version"] = "$(VERSION)"; \
+		d["Architecture"] = b["Architecture"] = "any"; \
+		d["Build-Depends"] = s["Build-Depends"] = \
+		"python (>= 2.6), debhelper (>= 8)"; \
+		b["Depends"] = "$${shlibs:Depends}, iproute2 | iproute"; \
+		b["Conflicts"] = b["Provides"] = b["Replaces"] = "re6stnet"; \
+		open("$@", "w").write("%s\n%s" % (s, b)); \
+		open("$(DSC)", "w").write(str(d))'
+
+debian.tar.gz: $(patsubst %,debian/%,changelog control prerm postinst rules source/*)
+# Unfortunately, OBS does not support symlinks.
+	set -e; cd re6stnet; [ ! -e debian/postinst ]; \
+	x=`find debian ! -type d $(patsubst %,! -path %,$^))`; \
+	tar -chaf ../$@ $$x -C .. $^
+
+define SED_SPEC
+	# https://fedoraproject.org/wiki/Packaging:Python_Appendix#Manual_byte_compilation
+	1i%global __os_install_post %(echo '%{__os_install_post}' |grep -v brp-python-bytecompile)
+	/^%define (_builddir|ver)/d
+	s/^(Name:\s*).*/\1$(PACKAGE)/
+	s/^(Version:\s*).*/\1$(VERSION)/
+	s/^(Release:\s*).*/\11/
+	/^BuildArch:/cAutoReqProv: no\nBuildRequires: gcc-c++, make, python\n#!BuildIgnore: rpmlint-Factory\nSource: %{name}_%{version}.tar.gz
+	/^Requires:/{/iproute/!d}
+	/^Recommends:/d
+	s/^(Conflicts:\s*).*/\1re6stnet/
+	/^%description$$/a%prep\n%setup -q
+	/^%preun$$/,/^$$/{/^$$/ifind /$(TARGET) -type f -name '*.py[co]' -delete
+	}
+endef
+
+re6stnet.spec: prepare
+	$(eval export SED_SPEC)
+	sed -r "$$SED_SPEC" re6stnet/$@ > $@
+
+PKGBUILD: PKGBUILD.in prepare
+	sed 's/%VERSION%/$(VERSION)/' $< > $@
+
+clean:
+	rm -rf "$(ROOT)" *.dsc *.tar.gz re6stnet.spec \
+		upstream.mk debian/control debian/changelog

obs/re6st/Makefile.in

+# Note that this file and related scripts (rebootstrap, install-eggs) don't
+# contain anything specific to re6stnet. They could be reused as is for SlapOS.
+
+# We don't strip ELF files because all dists automatically do it.
+# For those that produce debug packages, these packages are anyway quite small
+# (debug information also compresses quite well).
+
+BUILD = $(TARGET)
+
+PATH := $(patsubst %,$(CURDIR)/$(BUILD)/parts/%/bin:,chrpath file perl)$(PATH)
+PYTHON2 = $(firstword $(wildcard /usr/bin/python2 /usr/bin/python))
+
+all: $(BUILD)/.installed.cfg
+ifneq ($(wildcard upstream.mk),)
+	make -f upstream.mk
+%: _%
+	make -f upstream.mk $@
+_install%: _install;
+Makefile:;
+else
+install: _install
+endif
+
+$(BUILD)/bin/buildout:
+	cd $(BUILD) && $(PYTHON2) -S $(CURDIR)/rebootstrap
+
+$(BUILD)/.installed.cfg: $(BUILD)/bin/buildout $(BUILD)/buildout.cfg
+	cd $(BUILD) && bin/buildout
+	touch $@
+
+PROGS = $(patsubst %,$(DESTDIR)/usr/bin/%,$(BIN))
+
+_install: $(DESTDIR)/$(TARGET) $(PROGS);
+
+$(PROGS): $(BUILD)/.installed.cfg
+	mkdir -p $(@D)
+	sed s,$(CURDIR)/$(BUILD),/$(TARGET),g $(BUILD)/bin/$(@F) > $@
+	chmod +x $@
+
+$(DESTDIR)/$(TARGET): $(BUILD)/.installed.cfg
+	rm -rf $@ && mkdir -p $@/parts
+	cd $(BUILD) && $(PYTHON2) $(CURDIR)/install-eggs $@ $(BIN)
+	for x in $(filter-out $(NOPART),$(shell cd $(BUILD)/parts && echo *)); \
+	do cp --preserve=links -r $(BUILD)/parts/$$x $@/parts; done
+	cd $@ && $(CURDIR)/cleanup && chmod -R u+w .
+
+# Fix paths in files, first ELF, then non-binary
+	set -e $(CURDIR)/$(BUILD) /$(TARGET); set $$* "s:\\Q$$1\\E:$$2:g"; \
+	x=`find $@ -type f \( -executable -o -name '*.so*' \) | \
+	xargs -r file |sed -n 's/:.*ELF.*\(executable\|shared\).*//p' | \
+	xargs -r chrpath -k |perl -ne "$$3"'; \
+		s/(.*): R(UN)?PATH=(.*)/chrpath -r $$3 $$1/ and print'`; \
+	eval "$$x"; \
+	if x=`grep -rIlF $$1 $@`; then \
+		echo "Fixing path to $$2 rather than $$1:" $$x; \
+		perl -pi -e "$$3" $$x; fi
+
+# Fix symlinks at the end because they'll become broken inside DESTDIR.
+# Maybe we should generate relative symlinks, or let dists do it.
+	set -e $(CURDIR)/$(BUILD)/; \
+	find $@ -type l -lname "$$1*" -printf '%l %p\n' |cut -c"$${#1}"- | \
+	while read s d; do echo "Fixing symlink $$d"; \
+		rm $$d; ln -s /$(TARGET)$$s $$d; \
+	done
+
+clean:
+	find $(BUILD) -mindepth 1 -maxdepth 1 \
+		$(patsubst %,! -name %,$(BUILD_KEEP)) |xargs rm -rf

obs/re6st/templates/PKGBUILD.in → obs/re6st/PKGBUILD.in

 # Maintainer: Rafael Monnerat <rafael@nexedi.com>
 pkgname=re6st-node
-pkgver=%VERSION%+%RECIPE_VERSION%+%RELEASE%
-pkgdesc="re6stnet"
+pkgver=%VERSION%
+pkgdesc="resilient, scalable, IPv6 network application"
 pkgrel=1
 arch=('x86_64' 'i686')
-url="http://www.re6st.net"
 license=('GPL')
-depends=('gcc' 'make' 'patch' 'wget' 'python2' 'python2-distribute' 'bridge-utils')
-makedepends=('gcc' 'make' 'patch' 'wget' 'python2' 'python2-distribute' 'chrpath' 'inetutils')
+depends=('iproute2')
+makedepends=('gcc' 'make' 'python2')
 install='re6stnet.install'
 source=(${pkgname}_${pkgver}.tar.gz)
-md5sums=(%SOURCEMD5)
+
+SKIPCHECKSUMS=1
 
 build() {
-	cd "${srcdir}/${pkgname}_${pkgver}"
-	make PYTHON=python2
+	cd "${srcdir}/${pkgname}-${pkgver}"
+	make
 }
 
 package() {
-	cd "${srcdir}/${pkgname}_${pkgver}"
-	make DESTDIR="$pkgdir/" install
+	cd "${srcdir}/${pkgname}-${pkgver}"
+	make DESTDIR="$pkgdir" PREFIX=/usr install
 }

obs/re6st/re6st-node/re6stnet/buildout.cfg.in → obs/re6st/buildout.cfg.in

 [buildout]
 extends =
-  %BUILDOUT_URL%
-
-# Don't load extensions
-extensions = 
+  file://%(SLAPOS)s/stack/slapos.cfg
+  file://%(SLAPOS)s/component/chrpath/buildout.cfg
+  file://%(SLAPOS)s/component/re6stnet/buildout.cfg
 
 extends-cache = extends-cache
 download-cache = download-cache
 
 develop =
+extensions =
+newest = false
+
+parts += chrpath python
 
-parts = 
-   babeld
-   re6stnet
+[python]
+recipe = zc.recipe.egg
+interpreter = ${:_buildout_section_name_}
+eggs = setuptools
+python = buildout
+scripts =
 
 # Uguu, upstream buildout.cfg must be patched as it works the other way
 # around from a packager point of view at least, thus at the end static
@@ -24,30 +30,6 @@ parts =
 # ./configure --prefix=INSTALL_DIRECTORY && make install DESTDIR=BUILD_DIRECTORY
 [python2.7]
 configure-options +=
-  --prefix=%TARGET_DIRECTORY%/parts/${:_buildout_section_name_}
+  --prefix=%(TARGET)s/parts/${:_buildout_section_name_}
 environment +=
-  DESTDIR=%BUILD_ROOT_DIRECTORY%
-
-[gettext]
-# Add gettext library path to RPATH as its binaries are used to build
-# glib for example
-environment =
-  PATH=${perl:location}/bin:${lunzip:location}/bin:%(PATH)s
-  CPPFLAGS=-I${libxml2:location}/include -I${zlib:location}/include -I${ncurses:location}/include
-  LDFLAGS=-L${libxml2:location}/lib -Wl,-rpath=${libxml2:location}/lib -L${zlib:location}/lib -Wl,-rpath=${zlib:location}/lib -L${ncurses:location}/lib -Wl,-rpath=${ncurses:location}/lib -Wl,-rpath=%BUILD_DIRECTORY%/parts/${:_buildout_section_name_}/lib
-
-[bison]
-configure-options +=
-  --prefix=%TARGET_DIRECTORY%/parts/${:_buildout_section_name_}
-make-options +=
-  DESTDIR=%BUILD_ROOT_DIRECTORY%
-
-[python-cryptography-prep]
-recipe = zc.recipe.egg
-eggs =
-  ${python-cffi:egg}
-  enum34
-  pycparser
-  six
-  pyasn1
-
+  DESTDIR=%(ROOT)s

obs/re6st/cleanup

+#!/bin/sh -e
+(cd parts
+
+# Buildout files
+rm -r *-patch-download *-hooks-download || :
+
+# Removing gdb, locales, terminfo and base_completion.d directories
+find -type d \
+  \( -name gdb -name locale -o -name terminfo -o -name bash_completion.d \) \
+  -print0 -prune |xargs -0 rm -rf
+
+rm ncurses/lib/terminfo || :
+
+# Removing gettext archive tarball containing all versions
+rm gettext/share/gettext/archive.dir.tar.* || :
+
+# Removing include/pkgconfig files
+find -name 'python*' -prune -o \
+  \( -type d \( -name include -o -name pkgconfig \) \
+  -o -type f -executable -name '*-config' \
+  \) -print0 -prune |xargs -0 rm -rf
+)
+
+# Removing documentations
+find -regextype posix-extended -type d \
+  -iregex '.*/(gtk-)?(doc[s]?|man|info|test[s]?)$' \
+  -print0 -prune |xargs -0 rm -rf
+
+find -regextype posix-extended -type f \
+  -iregex '.*(COPYING|LICENSE).*' -delete
+
+# Removing Python byte-compiled files (as it will be done upon
+# package installation) and static libraries
+find -regextype posix-extended -type f \
+  -iregex '.*/*\.(py[co]|[l]?a|exe|bat)$' -delete
+
+# Removing empty directories
+find -type d -empty -delete

obs/re6st/debian/postinst

+#!/bin/sh
+set -e
+
+# https://lists.debian.org/debian-mentors/2015/12/msg00367.html
+x=/var/lib/dpkg/info/re6stnet.postrm
+if [ "$1" = "configure" ] && grep -q DPKG_MAINTSCRIPT_PACKAGE $x 2>/dev/null
+then sed -ri '1s,^(#!/bin/)sh,\1true\n\0,' $x
+fi
+
+#DEBHELPER#

obs/re6st/debian/preinst

+#!/bin/sh
+set -e
+
+# BBB: service renamed from 're6st-node' to 're6stnet'
+dpkg-maintscript-helper rm_conffile /etc/init.d/re6st-node -- "$@"
+
+#DEBHELPER#

obs/re6st/debian/prerm

+#!/bin/sh
+set -e
+
+pyclean() {
+  local x IFS='
+'
+  x=`dpkg -L $1`
+  rm -f `for x in $x; do
+    case $x in *.py) echo $x[co];; esac
+  done`
+}
+pyclean $DPKG_MAINTSCRIPT_PACKAGE
+
+#DEBHELPER#

obs/re6st/debian/rules

+#!/usr/bin/make -f
+# -*- makefile -*-
+#export DH_VERBOSE=1
+
+include debian/common.mk
+
+override_dh_auto_install:
+
+override_dh_link:
+
+override_dh_makeshlibs:
+	dh_makeshlibs -n
+
+override_dh_shlibdeps:
+	dh_shlibdeps -- -x$(PACKAGE)
+	rm $(TMP)/DEBIAN/shlibs
+
+%:
+	dh $@

obs/re6st/debian/source/format

+3.0 (native)

obs/re6st/install-eggs

+#!/usr/bin/python2
+import errno, os, shutil, sys
+
+path = set()
+
+class Stop(Exception):
+    pass
+
+class SysPath(tuple):
+    def __setitem__(self, i, v):
+        path.update(v)
+        raise Stop
+
+sys_path = sys.path
+try:
+    sys.path = SysPath(sys_path)
+    for x in sys.argv[2:]:
+        try:
+            execfile(os.path.join("bin", x))
+        except Stop:
+            pass
+finally:
+    sys.path = sys_path
+
+dest = sys.argv[1]
+for x in path:
+    x = os.path.relpath(x)
+    d = os.path.join(dest, x)
+    try:
+        os.mkdir(os.path.basename(x))
+    except OSError as e:
+        if e.errno != errno.EEXIST:
+            raise
+    shutil.copytree(x, d, True)

obs/re6st/prepare_re6st_build.sh

-#!/bin/sh -e
-
-# Edit for release
-VERSION=0.435
-# Edit for release
-RECIPE_VERSION=1.0.18
-# Edit for release
-RELEASE=1
-GITHASH=ded003246fc9a65d6030a8f77a770c33bf9d254b
-
-CURRENT_DIRECTORY="$(pwd)"
-# Define URL to compile
-BUILDOUT_URL=http://git.erp5.org/gitweb/slapos.git/blob_plain/refs/tags/slapos-$RECIPE_VERSION:/component/re6stnet/buildout.cfg
-OBS_DIRECTORY=$CURRENT_DIRECTORY/home:VIFIBnexedi/Re6stnet
-
-# Development Section [Uncomment for use] 
-OBS_DIRECTORY=$CURRENT_DIRECTORY/home:VIFIBnexedi:branches:home:VIFIBnexedi/Re6stnet
-BUILDOUT_URL=http://git.erp5.org/gitweb/slapos.git/blob_plain/$GITHASH:/component/re6stnet/buildout.cfg
-
-
-VERSION_REGEX="s!\%BUILDOUT_URL\%!$BUILDOUT_URL!g;s/\%RECIPE_VERSION\%/$RECIPE_VERSION/g;s/\%VERSION\%/$VERSION/g;s/\%RELEASE\%/$RELEASE/g"
-TEMPLATES_DIRECTORY=$CURRENT_DIRECTORY/templates
-RE6ST_ORGINAL_DIRECTORY=re6st-node
-RE6ST_DIRECTORY=re6st-node_$VERSION+$RECIPE_VERSION+$RELEASE
-
-function prepare_template_files
-{
-
-    # Prepare directory for new version if needed
-    mkdir -p $CURRENT_DIRECTORY/$RE6ST_DIRECTORY 
-    cp -rf $CURRENT_DIRECTORY/$RE6ST_ORGINAL_DIRECTORY/* $CURRENT_DIRECTORY/$RE6ST_DIRECTORY
-
-    sed $VERSION_REGEX $TEMPLATES_DIRECTORY/Makefile.in > $CURRENT_DIRECTORY/$RE6ST_DIRECTORY/re6stnet/Makefile
-    sed $VERSION_REGEX $TEMPLATES_DIRECTORY/offline.sh.in > $CURRENT_DIRECTORY/$RE6ST_DIRECTORY/re6stnet/offline.sh
-}
-
-function prepare_download_cache
-{
-    cd $CURRENT_DIRECTORY/$RE6ST_DIRECTORY/re6stnet/
-    rm -rf build/
-    bash offline.sh || (echo "Impossible to build Re6stnet, exiting." && exit 1)
-    # Go back to starting point
-    cd $CURRENT_DIRECTORY
-}
-
-function prepare_tarball
-{
-    tar -czf $RE6ST_DIRECTORY.tar.gz $RE6ST_DIRECTORY
-}
-
-function prepare_deb_packaging
-{
-
-    # Add entry to changelog
-    cd $TEMPLATES_DIRECTORY/debian
-    #dch -pm -v $VERSION+$RECIPE_VERSION+$RELEASE  --check-dirname-level=0 "New version of re6st ($VERSION+$RECIPE_VERSION+$RELEASE)"
-
-    # Add cron and logrotate files
-    cd $TEMPLATES_DIRECTORY
-    tar -czf debian.tar.gz debian
-    cd $OBS_DIRECTORY
-    cp $TEMPLATES_DIRECTORY/debian.tar.gz .
-}
-
-function obs_upload
-{
-    cd $OBS_DIRECTORY
-
-    # Update directory
-    osc up
-
-    # Remove former configuration
-    osc rm -f $RE6ST_ORGINAL_DIRECTORY*.tar.gz
-    osc rm -f re6stnet.spec
-
-    # Prepare new tarball
-    cp $CURRENT_DIRECTORY/$RE6ST_DIRECTORY.tar.gz .
-    osc add $RE6ST_DIRECTORY.tar.gz
-
-    # Prepare new specfile
-    sed $VERSION_REGEX $TEMPLATES_DIRECTORY/re6stnet.spec.in > re6stnet.spec
-    osc add re6stnet.spec
-
-    # Prepare new .dsc file
-    osc rm -f re6st*.dsc
-    sed $VERSION_REGEX $TEMPLATES_DIRECTORY/re6stnet.dsc.in > $RE6ST_DIRECTORY.dsc
-    osc add $RE6ST_DIRECTORY.dsc
-
-    osc rm -f PKGBUILD
-    SOURCEMD5=`md5sum $RE6ST_DIRECTORY.tar.gz | cut -d\  -f1`
-    sed "$VERSION_REGEX;s/\%SOURCEMD5\%/$SOURCEMD5/g" $TEMPLATES_DIRECTORY/PKGBUILD.in > PKGBUILD
-
-    cp $TEMPLATES_DIRECTORY/re6stnet.install .
-    osc add PKGBUILD re6stnet.install
-
-    ## Upload new Package
-    osc commit -m "New Re6stnet Recipe $RECIPE_VERSION"
-
-}
-
-prepare_template_files
-
-prepare_download_cache
-
-prepare_tarball
-
-prepare_deb_packaging
-
-obs_upload

obs/re6st/re6st-node/Makefile

-#!/usr/bin/make -f
-# -*- makefile -*-
-
-build: 
-	cd re6stnet; make build
-
-all: build
-
-install: all
-	cd re6stnet; make install
-	mkdir -p $(DESTDIR)/usr/bin/
-	mkdir -p $(DESTDIR)/usr/sbin/
-	cp $(DESTDIR)/opt/re6st/bin/re6st* $(DESTDIR)/usr/bin/
-	mkdir -p $(DESTDIR)/var/lib/re6stnet
-	mkdir -p $(DESTDIR)/var/log/re6stnet
-	mkdir -p $(DESTDIR)/etc/re6stnet
-	install -Dpm 0644 daemon/README.conf $(DESTDIR)/etc/re6stnet/README
-	install -Dp daemon/network-manager $(DESTDIR)/etc/NetworkManager/dispatcher.d/50re6stnet
-	
-clean:
-#	cd slapos; make clean

obs/re6st/re6st-node/daemon/README.conf

-re6stnet configuration files
-
-re6stnet is started automatically if /etc/re6stnet contains a 're6stnet.conf'
-file with all parameters to pass to the daemon.
-Same for the registry: all parameters must be specified in 're6st-registry.conf'
-
-So for a normal node, you should have the following files:
-  re6stnet.conf ca.crt cert.crt cert.key dh2048.pem
-And if you also host the registry:
-  re6st-registry.conf ca.key

obs/re6st/re6st-node/daemon/logrotate.conf

-/var/log/re6stnet/babeld.log {
-    compress
-    delaycompress
-    missingok
-    notifempty
-    postrotate
-        [ -r /var/run/re6st-babeld.pid ] && kill -USR2 $(cat /var/run/re6st-babeld.pid)
-    endscript
-}

obs/re6st/re6st-node/daemon/network-manager

-#!/usr/bin/python -S
-import errno, glob, os, signal, socket, subprocess, sys, time
-
-DAEMON = "re6stnet"
-CONFDIR = "/etc/re6stnet"
-
-os.environ["PATH"] = "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-iface = sys.argv[1]
-action = sys.argv[2]
-lock_name = DAEMON + ':' + iface
-
-if action in ("up", "vpn-up"):
-    os.chdir(CONFDIR)
-    if os.path.exists("re6stnet.conf") and not subprocess.call(
-       (DAEMON, "@re6stnet.conf", "--test", "main_interface != %r" % iface)):
-        s = socket.socket(socket.AF_UNIX, socket.SOCK_DGRAM)
-        try:
-            s.bind('\0' + lock_name)
-        except socket.error, e:
-            if e[0] != errno.EADDRINUSE:
-                raise
-            sys.stderr.write("daemon already started\n")
-            sys.exit()
-        if not os.fork():
-            os.setsid()
-            os.execlp(DAEMON, DAEMON, "@re6stnet.conf")
-
-elif action in ("down", "vpn-down"):
-    pattern = " @%s\n" % lock_name
-    with open("/proc/net/unix") as f:
-        for line in f:
-            if line.endswith(pattern):
-                sock_path = "socket:[%s]" % line.split()[-2]
-                break
-        else:
-            sys.exit()
-    pattern = "(%s)" % DAEMON
-    for path in glob.glob("/proc/*/stat"):
-        try:
-            pid = int(path[6:-5])
-            with open(path) as f:
-                stat = f.read().split()
-                if stat[1] == pattern and sock_path in (os.readlink(path)
-                        for path in glob.glob(path[:-4] + "fd/*")):
-                    break
-        except (EnvironmentError, ValueError):
-            pass
-    else:
-        sys.exit()
-    try:
-        os.kill(pid, signal.SIGTERM)
-        sleep = .1
-        while sleep < 5:
-            time.sleep(sleep)
-            os.kill(pid, 0)
-            sleep *= 1.5
-        # we waited for about 11 seconds
-        os.kill(-int(stat[4]), signal.SIGKILL)
-    except OSError, e:
-        if e.errno != errno.ESRCH:
-            raise

obs/re6st/re6st-node/daemon/re6st-registry.service

-[Unit]
-Description=Server application for re6snet
-ConditionPathExists=/etc/re6stnet/re6st-registry.conf
-
-[Service]
-WorkingDirectory=/etc/re6stnet
-ExecStart=/usr/bin/env re6st-registry @re6st-registry.conf
-Restart=on-failure
-
-[Install]
-WantedBy=multi-user.target

obs/re6st/re6st-node/daemon/re6stnet.service

-[Unit]
-Description=Resilient, Scalable, IPv6 Network application
-ConditionPathExists=/etc/re6stnet/re6stnet.conf
-
-[Service]
-WorkingDirectory=/etc/re6stnet
-# systemd plans to "introduce ExecCondition= in services" (cf its TODO file)
-ExecStart=/bin/sh -c 'set re6stnet @re6stnet.conf; "$@" --test main_interface==\"lo\" || exec "$@"'
-Restart=on-failure
-StandardOutput=null
-
-[Install]
-WantedBy=multi-user.target

obs/re6st/rebootstrap

+#!/usr/bin/python2 -S
+import glob, os, sys, zipfile
+d = "download-cache/dist"
+p = "setuptools-*"
+x, = glob.glob(d + "/" + p)
+zipfile.ZipFile(x).extractall()
+sys.path[:0] = p = glob.glob(p)
+from setuptools.command.easy_install import main
+for x in "bin", "eggs":
+    try:
+        os.mkdir(x)
+    except OSError, e:
+        pass
+main(["-f", d, "-mxd", x, "zc.buildout"])
+p.append(*glob.glob("eggs/zc.buildout-*"))
+os.write(os.open("bin/buildout", os.O_CREAT|os.O_WRONLY|os.O_TRUNC, 0777), """\
+#!%s -S
+import os, sys
+d = os.path.dirname(os.path.abspath(os.path.realpath(__file__)))
+d = os.path.dirname(d) + os.sep
+sys.path[:0] = (%s)
+from zc.buildout.buildout import main
+sys.exit(main())
+""" % (sys.executable, ", ".join("d + %r" % p for p in p)))

obs/re6st/templates/Makefile.in

-#!/usr/bin/make -f
-# -*- makefile -*-
-
-VERSION = %VERSION%
-RECIPE_VERSION = %RECIPE_VERSION%
-
-PY = $(PYTHON)
-INSTALL_DIRECTORY = $(DESTDIR)/opt/re6st
-TARGET_DIRECTORY = /opt/re6st
-BUILD_ROOT_DIRECTORY := $(shell pwd)/build
-BUILD_DIRECTORY := $(BUILD_ROOT_DIRECTORY)$(TARGET_DIRECTORY)
-PATCHES_DIRECTORY := $(shell pwd)/patches
-
-#Use to get path of buildout correct
-ORIGINAL_DIRECTORY := $(shell cat ./original_directory)
-
-BOOTSTRAP_URL := 'http://svn.zope.org/*checkout*/zc.buildout/trunk/bootstrap/bootstrap.py?rev=127518'
-
-build: build-stamp
-build-stamp:
-
-	@echo "Fixing buildout path to $(BUILD_ROOT_DIRECTORY) rather than $(ORIGINAL_DIRECTORY) for buildout"
-	grep -rIl '$(ORIGINAL_DIRECTORY)' $(BUILD_ROOT_DIRECTORY) 2> /dev/null | \
-		xargs sed -i 's#$(ORIGINAL_DIRECTORY)#$(BUILD_ROOT_DIRECTORY)#g' || \
-		echo "No path to fix."
-
-	@echo 'Preparing source tarball (recipe version: $(RECIPE_VERSION))'
-	cd $(BUILD_DIRECTORY) && \
-		$(PY) ./bin/buildout -v
-
-	@touch build-stamp
-
-cleanup-build: cleanup-build-stamp
-cleanup-build-stamp: build
-	@echo "Deleting unecessary files to reduce source tarball size"
-
-	# TODO: Figure out why there is no write permission even for
-	#       the owner
-	chmod -R u+w $(BUILD_DIRECTORY)
-
-	# Buildout files
-	rm -rfv $(BUILD_DIRECTORY)/downloads
-
-	rm -fv $(BUILD_DIRECTORY)/bootstrap.py $(BUILD_DIRECTORY)/buildout.cfg \
-		$(BUILD_DIRECTORY)/bin/buildout $(BUILD_DIRECTORY)/.installed.cfg \
-		$(BUILD_DIRECTORY)/environment.*
-
-	rm -rfv $(BUILD_DIRECTORY)/parts/*-patch-download/ \
-		$(BUILD_DIRECTORY)/parts/*-hooks-download/
-
-	rm -rfv $(BUILD_DIRECTORY)/extends-cache/ \
-		$(BUILD_DIRECTORY)/download-cache/
-
-	# Removing locales, terminfo and base_completion.d directories
-	find $(BUILD_DIRECTORY) -type d \
-		\( -name locale -o -name terminfo -o -name bash_completion.d \) \
-		-prune -exec rm -rfv '{}' ';'
-
-	rm -rf $(BUILD_DIRECTORY)/parts/glib/share/glib-2.0/gdb/ \
-		$(BUILD_DIRECTORY)/parts/glib/share/gdb
-
-	rm -rf $(BUILD_DIRECTORY)/parts/ncurses/lib/terminfo
-
-	# Removing gettext archive tarball containing all versions
-	rm -fv $(BUILD_DIRECTORY)/parts/gettext/share/gettext/archive.dir.tar.gz
-
-	# Removing documentations
-	find $(BUILD_DIRECTORY)/parts -regextype posix-extended -type d \
-		-iregex '.*/(gtk-)?(doc[s]?|man|info|test[s]?)$$' \
-		-prune -exec rm -rfv '{}' ';'
-
-	find $(BUILD_DIRECTORY) -regextype posix-extended -type f \
-		-iregex '.*(COPYING|LICENSE).*' -exec rm -f '{}' ';'
-
-	# Removing include directories
-	find $(BUILD_DIRECTORY) -type d \( -name include -o -name pkgconfig \) | \
-		grep -v python | xargs rm -rfv
-
-	find $(BUILD_DIRECTORY) -type f -executable -name '*-config' | \
-		grep -v python | xargs rm -fv
-
-	# Removing Python byte-compiled files (as it will be done upon
-	# package installation) and static libraries
-	find $(BUILD_DIRECTORY) -regextype posix-extended -type f \
-		-iregex '.*/*\.(py[co]|[l]?a|exe|bat)$$' -exec rm -fv '{}' ';'
-
-	# Removing empty directories
-	find $(BUILD_DIRECTORY) -type d -empty -prune -exec rmdir '{}' ';'
-
-	@touch cleanup-build-stamp
-
-strip-binaries: strip-binaries-stamp
-strip-binaries-stamp: build
-	set -e; \
-	for f in `find $(BUILD_DIRECTORY) -type f -executable ! -name '*.so*'`; do \
-	 	if file $$f | grep -Eq '.*ELF.*(executable|shared).*'; then \
-			echo "Stripping executable $$f"; \
-	 		strip --remove-section=.comment --remove-section=.note $$f; \
-		fi; \
-	done
-
-	set -e; \
-	for f in `find $(BUILD_DIRECTORY) -type f -name '*.so*'`; do \
-		if file $$f | grep -Eq '.*ELF.*shared.*'; then \
-			echo "Stripping shared library $$f"; \
-	 		strip --remove-section=.comment --strip-unneeded \
-	 			--remove-section=.note $$f; \
-		fi; \
-	done
-
-	@touch strip-binaries-stamp
-
-all: all-stamp
-all-stamp: build cleanup-build strip-binaries
-	@touch all-stamp
-
-install: all
-	mkdir -p $(INSTALL_DIRECTORY)
-	cp -r $(BUILD_DIRECTORY)/* $(INSTALL_DIRECTORY)
-
-	set -e; \
-	for l in `find $(INSTALL_DIRECTORY) -type l -lname '$(BUILD_DIRECTORY)/*'`; do \
-		echo "Fixing symlink $$l"; \
-		base_directory=`echo $$l|sed 's#^$(INSTALL_DIRECTORY)/\(.*/\).*#\1#'|sed -r 's#[^/]+#..#g'`; \
-		cd `dirname $$l` && \
-			ln -sf `readlink $$l | sed "s#$(BUILD_DIRECTORY)#$$base_directory#"` \
-				 `basename $$l`; \
-	done
-
-	@echo "Removing shebang from Python files not in bin/"
-	for f in `grep --exclude-dir='bin' --include='*.py' -rIl '^#!' $(INSTALL_DIRECTORY) 2> /dev/null`; do \
-		chmod -x $$f && sed -i '1d' $$f; \
-	done
-
-	@echo "Fixing path to $(TARGET_DIRECTORY) rather than $(BUILD_DIRECTORY)"
-	grep -rIl '$(BUILD_DIRECTORY)' $(INSTALL_DIRECTORY) 2> /dev/null | \
-		xargs sed -i 's#$(BUILD_DIRECTORY)#$(TARGET_DIRECTORY)#g' || \
-		echo "No path to fix."
-
-	set -e; \
-	for f in `find $(INSTALL_DIRECTORY) \( -type f -o -type l \) \( -executable -o -name "*.so" \)`; do \
-		if file -L $$f | grep -Eq '.*ELF.*(executable|shared).*'; then \
-			OLD_RPATH="`chrpath $$f|awk -F'RPATH=' '{print $$2}'|sed 's#$(BUILD_DIRECTORY)#$(TARGET_DIRECTORY)#g' 2> /dev/null`"; \
-			if [ -n "$$OLD_RPATH" ]; then \
-				chrpath -r "$$OLD_RPATH" $$f; \
-			fi; \
-		fi; \
-	done
-
-
-clean:
-	rm -rf $(BUILD_ROOT_DIRECTORY)
-	rm -f *-stamp
-
-.PHONY: build cleanup-build strip-binaries all install clean

obs/re6st/templates/debian/changelog

-re6st-node (0.399+0.260+0) unstable; urgency=low
-
-  * Initial release.
-
- -- Rafael Monnerat <rafael@nexedi.com>  Thu, 9 Apr 2015 11:32:17 +0300

obs/re6st/templates/debian/compat

-7

obs/re6st/templates/debian/control

-Source: re6st-node
-Maintainer: Julien Muchembled <jm@nexedi.com>
-Section: net
-Priority: optional
-Build-Depends: python-setuptools, python, debhelper (>= 7.4.3)
-Standards-Version: 3.9.1
-
-Package: re6st-node
-Architecture: any
-Depends: ${misc:Depends}, python, python-argparse, iproute2 | iproute, openssl
-Recommends: ${python:Recommends}, logrotate
-Suggests: ndisc6
-Description: resilient, scalable, IPv6 network application

obs/re6st/templates/debian/copyright

-Format: http://dep.debian.net/deps/dep5
-
-Files: *
-Copyright: 2012 Nexedi SA and Contributors
-License: GPL-2+
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- .
- This package is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
- .
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- .
- On Debian systems, the complete text of the GNU General
- Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".

obs/re6st/templates/debian/postrm

-#!/bin/sh -e
-
-[ "$DPKG_MAINTSCRIPT_PACKAGE" ]
-
-[ "$1" = purge ] && for d in lib log; do
-  d=/var/$d/$DPKG_MAINTSCRIPT_PACKAGE
-  [ ! -d "$d" ] || rm -r "$d" || :
-done
-
-#DEBHELPER#

obs/re6st/templates/debian/re6st-node.init

-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:          re6stnet
-# Required-Start:    $network $local_fs 
-
-# Required-Stop:
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-### END INIT INFO
-
-# PATH should only include /usr/* if it runs after the mountnfs.sh script
-PATH=/sbin:/usr/sbin:/bin:/usr/bin:/opt/re6st/bin
-NAME=re6stnet
-DESC="Resilient, Scalable, IPv6 Network application"
-DAEMON=/opt/re6st/bin/re6stnet
-CONFDIR=/etc/re6stnet
-PIDFILE=/var/run/$NAME.pid
-SCRIPTNAME=/etc/init.d/re6st-node
-
-# Exit if the package is not installed or not configured
-[ -x $DAEMON -a -r $CONFDIR/re6stnet.conf ] || exit 0
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
-. /lib/lsb/init-functions
-
-#
-# Function that starts the daemon/service
-#
-do_start()
-{
-	# Return
-	#   0 if daemon has been started
-	#   1 if daemon was already running
-	#   2 if daemon could not be started
-	set start-stop-daemon --quiet --pidfile $PIDFILE
-	"$@" --stop --test --name $NAME && return 1
-	"$@" --start --make-pidfile --background --chdir $CONFDIR --exec $DAEMON -- @re6stnet.conf || return 2
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
-	# Return
-	#   0 if daemon has been stopped
-	#   1 if daemon was already stopped
-	#   2 if daemon could not be stopped
-	#   other if a failure occurred
-	set start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5
-	"$@" --pidfile $PIDFILE --name $NAME
-	RETVAL="$?"
-	[ "$RETVAL" = 2 ] && return 2
-	rm -f $PIDFILE
-	# Wait for children to finish too if this is a daemon that forks
-	# and if the daemon is only ever run from this initscript.
-	# If the above conditions are not satisfied then add some other code
-	# that waits for the process to drop all resources that could be
-	# needed by services started subsequently.  A last resort is to
-	# sleep for some time.
-	"$@" --oknodo --exec $DAEMON
-	[ "$?" = 2 ] && return 2
-	# Many daemons don't delete their pidfiles when they exit.
-	return "$RETVAL"
-}
-
-cd $CONFDIR; $DAEMON @re6stnet.conf --test "main_interface != 'lo'" ||
-case "$1" in start) exit 0;; restart|force-reload) set stop;; esac
-
-case "$1" in
-  start)
-    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
-    do_start
-    case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-  ;;
-  stop)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
-	do_stop
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  status)
-       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
-       ;;
-  restart|force-reload)
-	#
-	# If the "reload" option is implemented then remove the
-	# 'force-reload' alias
-	#
-	log_daemon_msg "Restarting $DESC" "$NAME"
-	do_stop
-	case "$?" in
-	  0|1)
-		do_start
-		case "$?" in
-			0) log_end_msg 0 ;;
-			1) log_end_msg 1 ;; # Old process is still running
-			*) log_end_msg 1 ;; # Failed to start
-		esac
-		;;
-	  *)
-	  	# Failed to stop
-		log_end_msg 1
-		;;
-	esac
-	;;
-  *)
-	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
-	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
-	exit 3
-	;;
-esac
-
-:

obs/re6st/templates/debian/rules

-#!/usr/bin/make -f
-# Sample debian/rules that uses debhelper.
-# GNU copyright 1997 to 1999 by Joey Hess.
-
-# Uncomment this to turn on verbose mode.
-export DH_VERBOSE=1
-
-# This is the debhelper compatibility version to use.
-export DH_COMPAT=4
-
-CFLAGS = -g
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-CFLAGS += -O0
-else
-CFLAGS += -O2
-endif
-
-build: build-stamp
-build-stamp:
-	dh_testdir
-
-	# Add here commands to compile the package.
-	make
-	# --- end custom part for compiling
-
-	touch build-stamp
-
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp
-
-	# Add here commands to clean up after the build process
-	# --- end custom part for cleaning up
-
-	dh_clean
-
-install: build
-	dh_testdir
-	dh_testroot
-	dh_clean -k
-	dh_installdirs
-
-	# Add here commands to install the package
-	# The DESTDIR Has To Be Exactly  /usr/src/packages/BUILD/debian/<nameOfPackage>
-	dh_auto_install --TARGET_DIRECTORY=/opt/re6st
-
-	# --- end custom part for installing
-
-# Build architecture-independent files here.
-binary-indep: build install
-	# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
-	dh_testdir
-	dh_testroot
-#	dh_installdebconf
-	dh_installdocs
-	dh_installexamples
-	dh_installmenu
-#	dh_installlogrotate
-#	dh_installemacsen
-#	dh_installpam
-#	dh_installmime
-	dh_installinit
-	dh_installcron
-	dh_installlogrotate
-	dh_installman
-	dh_installinfo
-#	dh_undocumented
-	dh_installchangelogs
-	dh_link
-	dh_strip
-	dh_compress
-	dh_fixperms
-	dh_makeshlibs -n
-	dh_installdeb
-#	dh_perl
-	dh_shlibdeps
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb -- -Zlzma -z9
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install

obs/re6st/templates/debian/source/format

-3.0 (quilt)

obs/re6st/templates/offline.sh.in

-#!/bin/bash
-
-VERSION=%VERSION%
-RECIPE_VERSION=%RECIPE_VERSION%
-BUILDOUT_URL=%BUILDOUT_URL%
-
-TARGET_DIRECTORY=/opt/re6st
-BUILD_ROOT_DIRECTORY="$(pwd)/build"
-BUILD_DIRECTORY=$BUILD_ROOT_DIRECTORY$TARGET_DIRECTORY
-BOOTSTRAP_URL='https://raw.githubusercontent.com/buildout/buildout/1/bootstrap/bootstrap.py' 
-
-echo "Preparing source tarball (recipe version: $RECIPE_VERSION)"
-echo " Build Directory: $BUILD_DIRECTORY "
-echo " Buildroot Directory: $BUILD_ROOT_DIRECTORY "
-
-mkdir -p $BUILD_DIRECTORY
-mkdir $BUILD_DIRECTORY/extends-cache
-mkdir $BUILD_DIRECTORY/download-cache
-
-set -e
-
-echo "$BUILD_ROOT_DIRECTORY" > ./original_directory
-
-sed  "s!\%BUILDOUT_URL\%!$BUILDOUT_URL!g;s/\%RECIPE_VERSION\%/$RECIPE_VERSION/g;s|\%PATCHES_DIRECTORY\%|$PATCHES_DIRECTORY|g;s|\%TARGET_DIRECTORY\%|$TARGET_DIRECTORY|g;s|\%BUILD_ROOT_DIRECTORY\%|$BUILD_ROOT_DIRECTORY|g;s|\%BUILD_DIRECTORY\%|$BUILD_DIRECTORY|g" buildout.cfg.in > $BUILD_DIRECTORY/buildout.cfg 
-
-
-# Build first time to get download-cache and extends-cache ready
-cd $BUILD_DIRECTORY
-wget $BOOTSTRAP_URL --no-check-certificate -O bootstrap.py
-(python -S bootstrap.py && \
-    ./bin/buildout) || (echo "Failed to run buildout, exiting." && exit 1)
-
-cd $BUILD_ROOT_DIRECTORY/..
-
-# remove all files from build keeping only caches
-echo "Deleting unecessary files to reduce source tarball size"
-
-# TODO: Figure out why there is no write permission even for
-#       the owner
-chmod -R u+w $BUILD_DIRECTORY
-
-# Buildout files
-rm -rfv $BUILD_DIRECTORY/downloads
-
-rm -fv $BUILD_DIRECTORY/bootstrap.py $BUILD_DIRECTORY/buildout.cfg \
-        $BUILD_DIRECTORY/.installed.cfg \
-	$BUILD_DIRECTORY/environment.*
-
-rm -rfv $BUILD_DIRECTORY/parts/
-rm -rfv $BUILD_DIRECTORY/eggs/
-rm -rfv $BUILD_DIRECTORY/develop-eggs/
-rm -rfv $BUILD_DIRECTORY/bin
-
-
-# Removing empty directories
-find $BUILD_DIRECTORY -type d -empty -prune -exec rmdir '{}' ';'
-
-
-# Prepare buildout 
-sed  "s!\%BUILDOUT_URL\%!$BUILDOUT_URL!g;s/\%RECIPE_VERSION\%/$RECIPE_VERSION/g;s|\%PATCHES_DIRECTORY\%|$PATCHES_DIRECTORY|g;s|\%TARGET_DIRECTORY\%|$TARGET_DIRECTORY|g;s|\%BUILD_ROOT_DIRECTORY\%|$BUILD_ROOT_DIRECTORY|g;s|\%BUILD_DIRECTORY\%|$BUILD_DIRECTORY|g" $BUILD_ROOT_DIRECTORY/../buildout.cfg.in > $BUILD_DIRECTORY/buildout.cfg 
-
-
-
-cd $BUILD_DIRECTORY && \
-    wget $BOOTSTRAP_URL --no-check-certificate -O bootstrap.py && \
-    python -S bootstrap.py 
-
-
-# Removing Python byte-compiled files (as it will be done upon
-# package installation) and static libraries
-find $BUILD_DIRECTORY -regextype posix-extended -type f \
-	-iregex '.*/*\.(py[co]|[l]?a|exe|bat)$$' -exec rm -fv '{}' ';'

obs/re6st/templates/re6stnet.dsc.in

-Format: 1.0 
-Source: re6st-node
-Binary: re6st-node
-Architecture: any
-Version: %VERSION%+%RECIPE_VERSION%+%RELEASE%-1
-Maintainer: Rafael Monnerat <rafael@nexedi.com>
-Homepage: http://www.slapos.org
-Standards-Version: 3.9.2
-Build-Depends: debhelper (>= 4.1.16), chrpath, po-debconf, wget, python, python-dev, python-setuptools
-Files: 
- 1c2803e4693c74042985d753c9c3ba53 73736102 re6st-node_%VERSION%+%RECIPE_VERSION%+%RELEASE%.orig.tar.gz
- 1c2803e4693c74042985d753c9c3ba53 6102 re6st-node_%VERSION%+%RECIPE_VERSION%+%RELEASE%-1.diff.tar.gz

obs/re6st/templates/re6stnet.spec.in

-%define slapversion %RECIPE_VERSION%
-%define version %VERSION%
-%define unmangled_version %VERSION%
-%define release_number %RELEASE%
-
-Summary:   resilient, scalable, IPv6 network application
-Name:      re6st-node
-Version:   %{slapversion} 
-Release:   %{release_number}
-Source:    re6st-node_%{unmangled_version}+%{slapversion}+%{release_number}.tar.gz
-License:   GPLv2+
-Group:     Applications/Internet
-
-BuildRequires: gcc-c++, make, patch, wget, python, python-devel, chrpath, python-setuptools, openssl-devel
-
-Requires:  python 
-
-
-AutoReqProv: no
-
-
-%description
-
-%prep
-rm -rf $RPM_BUILD_DIR/re6st-node_%{unmangled_version}+%{slapversion}+%{release_number}
-zcat $RPM_SOURCE_DIR/re6st-node_%{unmangled_version}+%{slapversion}+%{release_number}.tar.gz | tar -xvf -
-
-%build
-cd $RPM_BUILD_DIR/re6st-node_%{unmangled_version}+%{slapversion}+%{release_number}
-make
-
-%install
-cd $RPM_BUILD_DIR/re6st-node_%{unmangled_version}+%{slapversion}+%{release_number}/
-make DESTDIR=$RPM_BUILD_ROOT install
-mkdir -p $RPM_BUILD_ROOT/etc/systemd/
-install -Dpm 0644 daemon/re6stnet.service $RPM_BUILD_ROOT/etc/systemd/re6stnet.service
-
-%files
-/etc/systemd
-/etc/systemd/re6stnet.service
-/etc/NetworkManager
-/etc/NetworkManager/dispatcher.d
-/etc/NetworkManager/dispatcher.d/50re6stnet
-/etc/re6stnet
-/usr/bin/re6st-conf
-/usr/bin/re6st-registry
-/usr/bin/re6stnet
-/var/lib/re6stnet
-/var/log/re6stnet
-/opt/re6st
-%defattr(-,root,root) 
-
-%post
-
-%preun
-
-%postun
-