Commit 0cbbb08e authored by Ville Skyttä's avatar Ville Skyttä

doc: Spelling fixes

parent 6aed49bf
...@@ -144,7 +144,7 @@ Now that the Okta app is configured, it's time to enable it in GitLab. ...@@ -144,7 +144,7 @@ Now that the Okta app is configured, it's time to enable it in GitLab.
1. [Reconfigure][reconf] or [restart] GitLab for Omnibus and installations 1. [Reconfigure][reconf] or [restart] GitLab for Omnibus and installations
from source respectively for the changes to take effect. from source respectively for the changes to take effect.
You might want to try this out on a incognito browser window. You might want to try this out on an incognito browser window.
## Configuring groups ## Configuring groups
......
...@@ -483,7 +483,7 @@ You can use GitLab as an auth endpoint and use a non-bundled Container Registry. ...@@ -483,7 +483,7 @@ You can use GitLab as an auth endpoint and use a non-bundled Container Registry.
1. A certificate keypair is required for GitLab and the Container Registry to 1. A certificate keypair is required for GitLab and the Container Registry to
communicate securely. By default omnibus-gitlab will generate one keypair, communicate securely. By default omnibus-gitlab will generate one keypair,
which is saved to `/var/opt/gitlab/gitlab-rails/etc/gitlab-registry.key`. which is saved to `/var/opt/gitlab/gitlab-rails/etc/gitlab-registry.key`.
When using an non-bundled Container Registry, you will need to supply a When using a non-bundled Container Registry, you will need to supply a
custom certificate key. To do that, add the following to custom certificate key. To do that, add the following to
`/etc/gitlab/gitlab.rb` `/etc/gitlab/gitlab.rb`
......
...@@ -154,7 +154,7 @@ who will take all the decisions to restore the service availability by: ...@@ -154,7 +154,7 @@ who will take all the decisions to restore the service availability by:
- Reconfigure the old **Master** and demote to **Slave** when it comes back online - Reconfigure the old **Master** and demote to **Slave** when it comes back online
You must have at least `3` Redis Sentinel servers, and they need to You must have at least `3` Redis Sentinel servers, and they need to
be each in a independent machine (that are believed to fail independently), be each in an independent machine (that are believed to fail independently),
ideally in different geographical areas. ideally in different geographical areas.
You can configure them in the same machines where you've configured the other You can configure them in the same machines where you've configured the other
......
...@@ -172,7 +172,7 @@ Parameters: ...@@ -172,7 +172,7 @@ Parameters:
| --------- | ---- | -------- | ----------- | | --------- | ---- | -------- | ----------- |
| `id` | integer/string | yes | The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user | | `id` | integer/string | yes | The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user |
| `issue_iid` | integer | yes | The internal ID of an issue | | `issue_iid` | integer | yes | The internal ID of an issue |
| `award_id` | integer | yes | The ID of a award_emoji | | `award_id` | integer | yes | The ID of an award_emoji |
```bash ```bash
curl --request DELETE --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" https://gitlab.example.com/api/v4/projects/1/issues/80/award_emoji/344 curl --request DELETE --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" https://gitlab.example.com/api/v4/projects/1/issues/80/award_emoji/344
...@@ -197,7 +197,7 @@ Parameters: ...@@ -197,7 +197,7 @@ Parameters:
| --------- | ---- | -------- | ----------- | | --------- | ---- | -------- | ----------- |
| `id` | integer/string | yes | The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user | | `id` | integer/string | yes | The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user |
| `issue_iid` | integer | yes | The internal ID of an issue | | `issue_iid` | integer | yes | The internal ID of an issue |
| `note_id` | integer | yes | The ID of an note | | `note_id` | integer | yes | The ID of a note |
```bash ```bash
...@@ -323,7 +323,7 @@ Parameters: ...@@ -323,7 +323,7 @@ Parameters:
| `id` | integer/string | yes | The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user | | `id` | integer/string | yes | The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user |
| `issue_iid` | integer | yes | The internal ID of an issue | | `issue_iid` | integer | yes | The internal ID of an issue |
| `note_id` | integer | yes | The ID of a note | | `note_id` | integer | yes | The ID of a note |
| `award_id` | integer | yes | The ID of a award_emoji | | `award_id` | integer | yes | The ID of an award_emoji |
```bash ```bash
curl --request DELETE --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" https://gitlab.example.com/api/v4/projects/1/issues/80/award_emoji/345 curl --request DELETE --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" https://gitlab.example.com/api/v4/projects/1/issues/80/award_emoji/345
......
...@@ -73,7 +73,7 @@ POST /groups/:id/milestones ...@@ -73,7 +73,7 @@ POST /groups/:id/milestones
Parameters: Parameters:
- `id` (required) - The ID or [URL-encoded path of the group](README.md#namespaced-path-encoding) owned by the authenticated user - `id` (required) - The ID or [URL-encoded path of the group](README.md#namespaced-path-encoding) owned by the authenticated user
- `title` (required) - The title of an milestone - `title` (required) - The title of a milestone
- `description` (optional) - The description of the milestone - `description` (optional) - The description of the milestone
- `due_date` (optional) - The due date of the milestone - `due_date` (optional) - The due date of the milestone
- `start_date` (optional) - The start date of the milestone - `start_date` (optional) - The start date of the milestone
......
...@@ -591,7 +591,7 @@ PUT /projects/:id/merge_requests/:merge_request_iid ...@@ -591,7 +591,7 @@ PUT /projects/:id/merge_requests/:merge_request_iid
| `title` | string | no | Title of MR | | `title` | string | no | Title of MR |
| `assignee_id` | integer | no | The ID of the user to assign the merge request to. Set to `0` or provide an empty value to unassign all assignees. | | `assignee_id` | integer | no | The ID of the user to assign the merge request to. Set to `0` or provide an empty value to unassign all assignees. |
| `milestone_id` | integer | no | The ID of a milestone to assign the merge request to. Set to `0` or provide an empty value to unassign a milestone.| | `milestone_id` | integer | no | The ID of a milestone to assign the merge request to. Set to `0` or provide an empty value to unassign a milestone.|
| `labels` | string | no | Comma-separated label names for an merge request. Set to an empty string to unassign all labels. | | `labels` | string | no | Comma-separated label names for a merge request. Set to an empty string to unassign all labels. |
| `description` | string | no | Description of MR | | `description` | string | no | Description of MR |
| `state_event` | string | no | New state (close/reopen) | | `state_event` | string | no | New state (close/reopen) |
| `remove_source_branch` | boolean | no | Flag indicating if a merge request should remove the source branch when merging | | `remove_source_branch` | boolean | no | Flag indicating if a merge request should remove the source branch when merging |
......
...@@ -70,7 +70,7 @@ POST /projects/:id/milestones ...@@ -70,7 +70,7 @@ POST /projects/:id/milestones
Parameters: Parameters:
- `id` (required) - The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user - `id` (required) - The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user
- `title` (required) - The title of an milestone - `title` (required) - The title of a milestone
- `description` (optional) - The description of the milestone - `description` (optional) - The description of the milestone
- `due_date` (optional) - The due date of the milestone - `due_date` (optional) - The due date of the milestone
- `start_date` (optional) - The start date of the milestone - `start_date` (optional) - The start date of the milestone
......
...@@ -158,7 +158,7 @@ Parameters: ...@@ -158,7 +158,7 @@ Parameters:
- `id` (required) - The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user - `id` (required) - The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user
- `snippet_id` (required) - The ID of a project snippet - `snippet_id` (required) - The ID of a project snippet
- `note_id` (required) - The ID of an snippet note - `note_id` (required) - The ID of a snippet note
```json ```json
{ {
......
...@@ -982,7 +982,7 @@ Example response: ...@@ -982,7 +982,7 @@ Example response:
## Unarchive a project ## Unarchive a project
Unarchives the project if the user is either admin or the project owner of this project. This action is Unarchives the project if the user is either admin or the project owner of this project. This action is
idempotent, thus unarchiving an non-archived project will not change the project. idempotent, thus unarchiving a non-archived project will not change the project.
``` ```
POST /projects/:id/unarchive POST /projects/:id/unarchive
......
...@@ -455,7 +455,7 @@ Mappings are defined as entries in the root YAML array, and are identified by a ...@@ -455,7 +455,7 @@ Mappings are defined as entries in the root YAML array, and are identified by a
- Literal periods (`.`) should be escaped as `\.`. - Literal periods (`.`) should be escaped as `\.`.
- `public` - `public`
- a string, starting and ending with `'`. - a string, starting and ending with `'`.
- Can include `\N` expressions to refer to capture groups in the `source` regular expression in order of their occurence, starting with `\1`. - Can include `\N` expressions to refer to capture groups in the `source` regular expression in order of their occurrence, starting with `\1`.
The public path for a source path is determined by finding the first `source` expression that matches it, and returning the corresponding `public` path, replacing the `\N` expressions with the values of the `()` capture groups if appropriate. The public path for a source path is determined by finding the first `source` expression that matches it, and returning the corresponding `public` path, replacing the `\N` expressions with the values of the `()` capture groups if appropriate.
......
...@@ -167,7 +167,7 @@ Finally, push to GitLab and let the tests begin! ...@@ -167,7 +167,7 @@ Finally, push to GitLab and let the tests begin!
### Test against different PHP versions in Shell builds ### Test against different PHP versions in Shell builds
The [phpenv][] project allows you to easily manage different versions of PHP The [phpenv][] project allows you to easily manage different versions of PHP
each with its own config. This is specially usefull when testing PHP projects each with its own config. This is especially useful when testing PHP projects
with the Shell executor. with the Shell executor.
You will have to install it on your build machine under the `gitlab-runner` You will have to install it on your build machine under the `gitlab-runner`
...@@ -227,7 +227,7 @@ following in your `.gitlab-ci.yml`: ...@@ -227,7 +227,7 @@ following in your `.gitlab-ci.yml`:
... ...
# Composer stores all downloaded packages in the vendor/ directory. # Composer stores all downloaded packages in the vendor/ directory.
# Do not use the following if the vendor/ directory is commited to # Do not use the following if the vendor/ directory is committed to
# your git repository. # your git repository.
cache: cache:
paths: paths:
......
...@@ -42,7 +42,7 @@ production: ...@@ -42,7 +42,7 @@ production:
This project has three jobs: This project has three jobs:
1. `test` - used to test Django application, 1. `test` - used to test Django application,
2. `staging` - used to automatically deploy staging environment every push to `master` branch 2. `staging` - used to automatically deploy staging environment every push to `master` branch
3. `production` - used to automatically deploy production environmnet for every created tag 3. `production` - used to automatically deploy production environment for every created tag
## Store API keys ## Store API keys
......
...@@ -194,7 +194,7 @@ before_script: ...@@ -194,7 +194,7 @@ before_script:
## ##
## You can optionally disable host key checking. Be aware that by adding that ## You can optionally disable host key checking. Be aware that by adding that
## you are suspectible to man-in-the-middle attacks. ## you are susceptible to man-in-the-middle attacks.
## WARNING: Use this only with the Docker executor, if you use it with shell ## WARNING: Use this only with the Docker executor, if you use it with shell
## you will overwrite your user's SSH config. ## you will overwrite your user's SSH config.
## ##
......
...@@ -87,7 +87,7 @@ future GitLab releases.** ...@@ -87,7 +87,7 @@ future GitLab releases.**
## 9.0 Renaming ## 9.0 Renaming
To follow conventions of naming across GitLab, and to futher move away from the To follow conventions of naming across GitLab, and to further move away from the
`build` term and toward `job` CI variables have been renamed for the 9.0 `build` term and toward `job` CI variables have been renamed for the 9.0
release. release.
......
...@@ -61,7 +61,7 @@ against EE. ...@@ -61,7 +61,7 @@ against EE.
1. Tries to apply it to current EE `master` 1. Tries to apply it to current EE `master`
1. If it applies cleanly, the job succeeds 1. If it applies cleanly, the job succeeds
In the case where the job fails, it means you should create a `ee-<ce_branch>` In the case where the job fails, it means you should create an `ee-<ce_branch>`
or `<ce_branch>-ee` branch, push it to EE and open a merge request against EE or `<ce_branch>-ee` branch, push it to EE and open a merge request against EE
`master`. `master`.
At this point if you retry the failing job in your CE merge request, it should At this point if you retry the failing job in your CE merge request, it should
......
...@@ -123,7 +123,7 @@ roughly be as follows: ...@@ -123,7 +123,7 @@ roughly be as follows:
scheduling jobs for newly created data. scheduling jobs for newly created data.
1. In a post-deployment migration you'll need to ensure no jobs remain. To do 1. In a post-deployment migration you'll need to ensure no jobs remain. To do
so you can use `Gitlab::BackgroundMigration.steal` to process any remaining so you can use `Gitlab::BackgroundMigration.steal` to process any remaining
jobs before continueing. jobs before continuing.
1. Remove the old column. 1. Remove the old column.
## Example ## Example
......
...@@ -420,7 +420,7 @@ the style below as a guide: ...@@ -420,7 +420,7 @@ the style below as a guide:
In this case: In this case:
- before each step list the installation method is declared in bold - before each step list the installation method is declared in bold
- three dashes (`---`) are used to create an horizontal line and separate the - three dashes (`---`) are used to create a horizontal line and separate the
two methods two methods
- the code blocks are indented one or more spaces under the list item to render - the code blocks are indented one or more spaces under the list item to render
correctly correctly
......
...@@ -56,7 +56,7 @@ To help us mock the responses we need we use [axios-mock-adapter][axios-mock-ada ...@@ -56,7 +56,7 @@ To help us mock the responses we need we use [axios-mock-adapter][axios-mock-ada
### Mock poll requests on tests with axios ### Mock poll requests on tests with axios
Because polling function requires an header object, we need to always include an object as the third argument: Because polling function requires a header object, we need to always include an object as the third argument:
```javascript ```javascript
mock.onGet('/users').reply(200, { foo: 'bar' }, {}); mock.onGet('/users').reply(200, { foo: 'bar' }, {});
......
...@@ -456,7 +456,7 @@ describe('Todos App', () => { ...@@ -456,7 +456,7 @@ describe('Todos App', () => {
}); });
``` ```
#### `mountComponent` helper #### `mountComponent` helper
There is an helper in `spec/javascripts/helpers/vue_mount_component_helper.js` that allows you to mount a component with the given props: There is a helper in `spec/javascripts/helpers/vue_mount_component_helper.js` that allows you to mount a component with the given props:
```javascript ```javascript
import Vue from 'vue'; import Vue from 'vue';
......
...@@ -4,7 +4,7 @@ When writing migrations for GitLab, you have to take into account that ...@@ -4,7 +4,7 @@ When writing migrations for GitLab, you have to take into account that
these will be ran by hundreds of thousands of organizations of all sizes, some with these will be ran by hundreds of thousands of organizations of all sizes, some with
many years of data in their database. many years of data in their database.
In addition, having to take a server offline for a a upgrade small or big is a In addition, having to take a server offline for an upgrade small or big is a
big burden for most organizations. For this reason it is important that your big burden for most organizations. For this reason it is important that your
migrations are written carefully, can be applied online and adhere to the style migrations are written carefully, can be applied online and adhere to the style
guide below. guide below.
......
...@@ -8,7 +8,7 @@ Note that if your db user does not have advanced privileges you must create the ...@@ -8,7 +8,7 @@ Note that if your db user does not have advanced privileges you must create the
bundle exec rake setup bundle exec rake setup
``` ```
The `setup` task is a alias for `gitlab:setup`. The `setup` task is an alias for `gitlab:setup`.
This tasks calls `db:reset` to create the database, calls `add_limits_mysql` that adds limits to the database schema in case of a MySQL database and finally it calls `db:seed_fu` to seed the database. This tasks calls `db:reset` to create the database, calls `add_limits_mysql` that adds limits to the database schema in case of a MySQL database and finally it calls `db:seed_fu` to seed the database.
Note: `db:setup` calls `db:seed` but this does nothing. Note: `db:setup` calls `db:seed` but this does nothing.
......
...@@ -27,7 +27,7 @@ View the [interactive example](http://codepen.io/awhildy/full/GNyEvM/) here. ...@@ -27,7 +27,7 @@ View the [interactive example](http://codepen.io/awhildy/full/GNyEvM/) here.
### Dropdowns ### Dropdowns
The dropdown menu should feel like it is appearing from the triggering element. Combining a position shift `400ms cubic-bezier(0.23, 1, 0.32, 1)` with a opacity animation `200ms linear` on the second half of the motion achieves this affect. The dropdown menu should feel like it is appearing from the triggering element. Combining a position shift `400ms cubic-bezier(0.23, 1, 0.32, 1)` with an opacity animation `200ms linear` on the second half of the motion achieves this affect.
View the [interactive example](http://codepen.io/awhildy/full/jVLJpb/) here. View the [interactive example](http://codepen.io/awhildy/full/jVLJpb/) here.
......
...@@ -108,7 +108,7 @@ Primary buttons communicate the main call to action. There should only be one ca ...@@ -108,7 +108,7 @@ Primary buttons communicate the main call to action. There should only be one ca
![Primary button example](img/button-primary.png) ![Primary button example](img/button-primary.png)
#### Secondary #### Secondary
Secondary buttons are for alternative commands. They should be conveyed by a button with an stroke, and no background fill. Secondary buttons are for alternative commands. They should be conveyed by a button with a stroke, and no background fill.
![Secondary button example](img/button-secondary.png) ![Secondary button example](img/button-secondary.png)
...@@ -181,7 +181,7 @@ A count element is used in navigation contexts where it is helpful to indicate t ...@@ -181,7 +181,7 @@ A count element is used in navigation contexts where it is helpful to indicate t
## Lists ## Lists
Lists are used where ever there is a single column of information to display. Ths [issues list](https://gitlab.com/gitlab-org/gitlab-ce/issues) is an example of a important list in the GitLab UI. Lists are used where ever there is a single column of information to display. Ths [issues list](https://gitlab.com/gitlab-org/gitlab-ce/issues) is an example of an important list in the GitLab UI.
### Types ### Types
...@@ -269,7 +269,7 @@ Modals are only used for having a conversation and confirmation with the user. T ...@@ -269,7 +269,7 @@ Modals are only used for having a conversation and confirmation with the user. T
* Modals contain the header, body, and actions. * Modals contain the header, body, and actions.
* **Header(1):** The header title is a question instead of a descriptive phrase. * **Header(1):** The header title is a question instead of a descriptive phrase.
* **Body(2):** The content in body should never be ambiguous and unclear. It provides specific information. * **Body(2):** The content in body should never be ambiguous and unclear. It provides specific information.
* **Actions(3):** Contains a affirmative action, a dismissive action, and an extra action. The order of actions from left to right: Dismissive action → Extra action → Affirmative action * **Actions(3):** Contains an affirmative action, a dismissive action, and an extra action. The order of actions from left to right: Dismissive action → Extra action → Affirmative action
* Confirmations regarding labels should keep labeling styling. * Confirmations regarding labels should keep labeling styling.
* References to commits, branches, and tags should be **monospaced**. * References to commits, branches, and tags should be **monospaced**.
......
...@@ -27,7 +27,7 @@ This means that, as a rule, copy should be very short. A long message or label i ...@@ -27,7 +27,7 @@ This means that, as a rule, copy should be very short. A long message or label i
>**Example:** >**Example:**
Use `Add` instead of `Add issue` as a button label. Use `Add` instead of `Add issue` as a button label.
Preferrably use context and placement of controls to make it obvious what clicking on them will do. Preferably use context and placement of controls to make it obvious what clicking on them will do.
--- ---
......
...@@ -178,7 +178,7 @@ address. Read [IP address types and allocation methods in Azure][Azure-IP-Addres ...@@ -178,7 +178,7 @@ address. Read [IP address types and allocation methods in Azure][Azure-IP-Addres
At this stage you should have a running and fully operational VM. However, none of the services on At this stage you should have a running and fully operational VM. However, none of the services on
your VM (e.g. GitLab) will be publicly accessible via the internet until you have opened up the your VM (e.g. GitLab) will be publicly accessible via the internet until you have opened up the
neccessary ports to enable access to those services. necessary ports to enable access to those services.
Ports are opened by adding _security rules_ to the **"Network security group"** (NSG) which our VM Ports are opened by adding _security rules_ to the **"Network security group"** (NSG) which our VM
has been assigned to. If you followed the process above, then Azure will have automatically created has been assigned to. If you followed the process above, then Azure will have automatically created
...@@ -436,4 +436,4 @@ Check out our other [Technical Articles][GitLab-Technical-Articles] or browse th ...@@ -436,4 +436,4 @@ Check out our other [Technical Articles][GitLab-Technical-Articles] or browse th
[SSH]: https://en.wikipedia.org/wiki/Secure_Shell [SSH]: https://en.wikipedia.org/wiki/Secure_Shell
[PuTTY]: http://www.putty.org/ [PuTTY]: http://www.putty.org/
[Using-SSH-In-Putty]: https://mediatemple.net/community/products/dv/204404604/using-ssh-in-putty- [Using-SSH-In-Putty]: https://mediatemple.net/community/products/dv/204404604/using-ssh-in-putty-
\ No newline at end of file
...@@ -431,7 +431,7 @@ GitLab Shell is an SSH access and repository management software developed speci ...@@ -431,7 +431,7 @@ GitLab Shell is an SSH access and repository management software developed speci
**Note:** GitLab Shell application startup time can be greatly reduced by disabling RubyGems. This can be done in several manners: **Note:** GitLab Shell application startup time can be greatly reduced by disabling RubyGems. This can be done in several manners:
* Export `RUBYOPT=--disable-gems` environment variable for the processes * Export `RUBYOPT=--disable-gems` environment variable for the processes
* Compile Ruby with `configure --disable-rubygems` to disable RubyGems by default. Not recommened for system-wide Ruby. * Compile Ruby with `configure --disable-rubygems` to disable RubyGems by default. Not recommended for system-wide Ruby.
* Omnibus GitLab [replaces the *shebang* line of the `gitlab-shell/bin/*` scripts](https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests/1707) * Omnibus GitLab [replaces the *shebang* line of the `gitlab-shell/bin/*` scripts](https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests/1707)
### Install gitlab-workhorse ### Install gitlab-workhorse
...@@ -442,7 +442,7 @@ which is the recommended location. ...@@ -442,7 +442,7 @@ which is the recommended location.
sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse]" RAILS_ENV=production sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse]" RAILS_ENV=production
You can specify a different Git repository by providing it as an extra paramter: You can specify a different Git repository by providing it as an extra parameter:
sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse,https://example.com/gitlab-workhorse.git]" RAILS_ENV=production sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse,https://example.com/gitlab-workhorse.git]" RAILS_ENV=production
...@@ -486,7 +486,7 @@ Make GitLab start on boot: ...@@ -486,7 +486,7 @@ Make GitLab start on boot:
# Fetch Gitaly source with Git and compile with Go # Fetch Gitaly source with Git and compile with Go
sudo -u git -H bundle exec rake "gitlab:gitaly:install[/home/git/gitaly]" RAILS_ENV=production sudo -u git -H bundle exec rake "gitlab:gitaly:install[/home/git/gitaly]" RAILS_ENV=production
You can specify a different Git repository by providing it as an extra paramter: You can specify a different Git repository by providing it as an extra parameter:
sudo -u git -H bundle exec rake "gitlab:gitaly:install[/home/git/gitaly,https://example.com/gitaly.git]" RAILS_ENV=production sudo -u git -H bundle exec rake "gitlab:gitaly:install[/home/git/gitaly,https://example.com/gitaly.git]" RAILS_ENV=production
...@@ -656,7 +656,7 @@ Checkout the [GitLab Runner section](https://about.gitlab.com/gitlab-ci/#gitlab- ...@@ -656,7 +656,7 @@ Checkout the [GitLab Runner section](https://about.gitlab.com/gitlab-ci/#gitlab-
### Adding your Trusted Proxies ### Adding your Trusted Proxies
If you are using a reverse proxy on an separate machine, you may want to add the If you are using a reverse proxy on a separate machine, you may want to add the
proxy to the trusted proxies list. Otherwise users will appear signed in from the proxy to the trusted proxies list. Otherwise users will appear signed in from the
proxy's IP address. proxy's IP address.
......
...@@ -14,7 +14,7 @@ This article will show you how to install Git on macOS, Ubuntu Linux and Windows ...@@ -14,7 +14,7 @@ This article will show you how to install Git on macOS, Ubuntu Linux and Windows
Although it is easy to use the version of Git shipped with macOS Although it is easy to use the version of Git shipped with macOS
or install the latest version of Git on macOS by downloading it from the project website, or install the latest version of Git on macOS by downloading it from the project website,
we recommend installing it via Homebrew to get access to we recommend installing it via Homebrew to get access to
an extensive selection of dependancy managed libraries and applications. an extensive selection of dependency managed libraries and applications.
If you are sure you don't need access to any additional development libraries If you are sure you don't need access to any additional development libraries
or don't have approximately 15gb of available disk space for Xcode and Homebrew or don't have approximately 15gb of available disk space for Xcode and Homebrew
......
...@@ -229,7 +229,7 @@ Our free on Premise solution with >100,000 users ...@@ -229,7 +229,7 @@ Our free on Premise solution with >100,000 users
### GitLab CI ### GitLab CI
Our own Continuos Integration [feature](https://about.gitlab.com/gitlab-ci/) that is shipped with each instance Our own Continuous Integration [feature](https://about.gitlab.com/gitlab-ci/) that is shipped with each instance
### GitLab EE ### GitLab EE
......
...@@ -147,7 +147,7 @@ change which will be helpful is the database name for which we can use ...@@ -147,7 +147,7 @@ change which will be helpful is the database name for which we can use
## ElastiCache ## ElastiCache
EC is an in-memory hosted caching solution. Redis maintains its own EC is an in-memory hosted caching solution. Redis maintains its own
persistance and is used for certain types of application. persistence and is used for certain types of application.
Let's choose the ElastiCache service in the Database section from our Let's choose the ElastiCache service in the Database section from our
AWS console. Now lets create a cache subnet group which will be very AWS console. Now lets create a cache subnet group which will be very
...@@ -311,7 +311,7 @@ Here is a tricky part though, when adding subnets we need to associate ...@@ -311,7 +311,7 @@ Here is a tricky part though, when adding subnets we need to associate
public subnets instead of the private ones where our instances will public subnets instead of the private ones where our instances will
actually live. actually live.
On the secruity group section let's create a new one named On the security group section let's create a new one named
`gitlab-loadbalancer-sec-group` and allow both HTTP ad HTTPS traffic `gitlab-loadbalancer-sec-group` and allow both HTTP ad HTTPS traffic
from anywhere. from anywhere.
......
...@@ -212,7 +212,7 @@ Sign in and re-enable two-factor authentication as soon as possible. ...@@ -212,7 +212,7 @@ Sign in and re-enable two-factor authentication as soon as possible.
For example, if a user is trying to access a GitLab instance from `first.host.xyz` and `second.host.xyz`: For example, if a user is trying to access a GitLab instance from `first.host.xyz` and `second.host.xyz`:
- The user logs in via `first.host.xyz` and registers their U2F key. - The user logs in via `first.host.xyz` and registers their U2F key.
- The user logs out and attempts to log in via `first.host.xyz` - U2F authentication suceeds. - The user logs out and attempts to log in via `first.host.xyz` - U2F authentication succeeds.
- The user logs out and attempts to log in via `second.host.xyz` - U2F authentication fails, because - The user logs out and attempts to log in via `second.host.xyz` - U2F authentication fails, because
the U2F key has only been registered on `first.host.xyz`. the U2F key has only been registered on `first.host.xyz`.
......
...@@ -10,7 +10,7 @@ In the _Recipients_ area, provide a list of emails separated by commas. ...@@ -10,7 +10,7 @@ In the _Recipients_ area, provide a list of emails separated by commas.
You can configure any of the following settings depending on your preference. You can configure any of the following settings depending on your preference.
+ **Push events** - Email will be triggered when a push event is recieved + **Push events** - Email will be triggered when a push event is received
+ **Tag push events** - Email will be triggered when a tag is created and pushed + **Tag push events** - Email will be triggered when a tag is created and pushed
+ **Send from committer** - Send notifications from the committer's email address if the domain is part of the domain GitLab is running on (e.g. `user@gitlab.com`). + **Send from committer** - Send notifications from the committer's email address if the domain is part of the domain GitLab is running on (e.g. `user@gitlab.com`).
+ **Disable code diffs** - Don't include possibly sensitive code diffs in notification body. + **Disable code diffs** - Don't include possibly sensitive code diffs in notification body.
......
...@@ -316,7 +316,7 @@ X-Gitlab-Event: Issue Hook ...@@ -316,7 +316,7 @@ X-Gitlab-Event: Issue Hook
Triggered when a new comment is made on commits, merge requests, issues, and code snippets. Triggered when a new comment is made on commits, merge requests, issues, and code snippets.
The note data will be stored in `object_attributes` (e.g. `note`, `noteable_type`). The The note data will be stored in `object_attributes` (e.g. `note`, `noteable_type`). The
payload will also include information about the target of the comment. For example, payload will also include information about the target of the comment. For example,
a comment on a issue will include the specific issue information under the `issue` key. a comment on an issue will include the specific issue information under the `issue` key.
Valid target types: Valid target types:
1. `commit` 1. `commit`
......
...@@ -40,7 +40,7 @@ issues around that same idea. ...@@ -40,7 +40,7 @@ issues around that same idea.
You do that as explained above, when You do that as explained above, when
[mentioning an issue from a commit message](#from-commit-messages). [mentioning an issue from a commit message](#from-commit-messages).
When mentioning the issue "A" in a issue "B", the issue "A" will also When mentioning the issue "A" in issue "B", the issue "A" will also
display a notification in its tracker. The same is valid for mentioning display a notification in its tracker. The same is valid for mentioning
issues in merge requests. issues in merge requests.
......
...@@ -52,7 +52,7 @@ special options available when filtering by milestone: ...@@ -52,7 +52,7 @@ special options available when filtering by milestone:
The milestone sidebar shows percentage complete, start date and due date, The milestone sidebar shows percentage complete, start date and due date,
issues, total issue weight, total issue time spent, and merge requests. issues, total issue weight, total issue time spent, and merge requests.
The percentage complete is calcualted as: Closed and merged merge requests plus all closed issues divided by The percentage complete is calculated as: Closed and merged merge requests plus all closed issues divided by
total merge requests and issues. total merge requests and issues.
![Milestone sidebar](img/sidebar.png) ![Milestone sidebar](img/sidebar.png)
......
...@@ -91,7 +91,7 @@ to steal the tokens of other jobs. ...@@ -91,7 +91,7 @@ to steal the tokens of other jobs.
Since 9.0 [pipeline triggers][triggers] do support the new permission model. Since 9.0 [pipeline triggers][triggers] do support the new permission model.
The new triggers do impersonate their associated user including their access The new triggers do impersonate their associated user including their access
to projects and their project permissions. To migrate trigger to use new permisison to projects and their project permissions. To migrate trigger to use new permission
model use **Take ownership**. model use **Take ownership**.
## Before GitLab 8.12 ## Before GitLab 8.12
......
...@@ -373,7 +373,7 @@ configuration. ...@@ -373,7 +373,7 @@ configuration.
If the case of `404.html`, there are different scenarios. For example: If the case of `404.html`, there are different scenarios. For example:
- If you use project Pages (served under `/projectname/`) and try to access - If you use project Pages (served under `/projectname/`) and try to access
`/projectname/non/exsiting_file`, GitLab Pages will try to serve first `/projectname/non/existing_file`, GitLab Pages will try to serve first
`/projectname/404.html`, and then `/404.html`. `/projectname/404.html`, and then `/404.html`.
- If you use user/group Pages (served under `/`) and try to access - If you use user/group Pages (served under `/`) and try to access
`/non/existing_file` GitLab Pages will try to serve `/404.html`. `/non/existing_file` GitLab Pages will try to serve `/404.html`.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment