New test checkReadConflictErrorClearedDuringAbort().

This confirms that 3.3 didn't have the 3.2.4c1 bug wherein
an explict transaction abort() failed to clear Connections'
memory of ReadConflictErrors.

Act as if a 3.3c1 release were being made.  Maybe it will
be.  Besides "the usual" release fiddling, repaired many
out-of-date pieces of the ZODB programming guide; I'm sure
many remain, though.

A test here didn't clean up after a failing commit().

Removed obsolete comment.

As discussed on zodb-dev, failing commit "sticks" now.

After a commit fails (raises an exception), all subsequent attempts
to commit, join, or register with the transaction now raise the new
TransactionFailedError.  The failed transaction must be explicitly
discarded now, via abort() on the transaction or begin() on its
transaction manager.

Officially deprecate Transaction.begin().

Forward port from Zope 2.7 branch.

The ConflictError.get_{old,new}_serial() methods each did what the other
was supposed to do.

Port from Zope 2.7 branch.

Collector #1488 (TemporaryStorage -- going backward in time).

This confusion was really due to that the detail on a ConflictError
exception didn't make sense.

_handle_independent():  Failed to record that a ReadConflictError
was raised for an object with a _p_independent() method that
returned false.

Raise ConnectionStateError if an attempt to close a connection
is made while the connection has a pending subtransaction.

Transaction.begin() didn't do anything.

begin() is supposed to abort the current transaction, but
Transaction.begin() did not.  Calling begin() on a transaction
*manager* worked fine, and is the intended way to do a begin()
in 3.3.  But calling begin() on a Transaction object is still
very easy to do (e.g., the older get_transaction().begin()
spelling still works), and shouldn't be a subtle disaster.

Empty BTrees/__init__.py; isn't doing anything except
creating problems.

It's possible that an oid is referenced despite never being
defined (well, it's not *supposed* to be possible ...).

automated test.  There were so many oddities getting that test
to pass, and so much consequent fiddling of other code, that I
don't intend to merge this to the 3.3 branch.  Also moved to
current Python CVS doctest.py, because the test really needs
the +ELLIPSIS option (tids vary across runs).

and extension fields from a transaction was fatally confused,
usually reading them out of the object pickle by mistake.  This
caused several tools to display binary gibberish.

Forward port from Zope 2.7 branch.

analyze_rec():  This produced spurious "len of unsized object" messages
when a data record had a backpointer instead of a pickle.  Repaired.

analyze(), analyze_trans():  Simplified overly elaborate iteration code.

Forward port from Zope 2.7 branch.

Many changes to fsrefs.py, based on problems I hit using it in real life.

Forward port from Zope 2.7 branch.

oid_repr():  Make it obvious which base is intended.  The output was
3-way ambiguous.

Just changing what we're calling the next release.

Please don't do that:  ZODB changes need to be done in the ZODB
project.  Checkins to Zope3 have no effect on ZODB in reality.

This includes:

r26945 | jim | 2004-08-06 18:30:44 -0400 (Fri, 06 Aug 2004) | 6 lines
   M /Zope3/trunk/src/persistent/tests/test_persistent.py

Updated to work with the versions of doctest from Python with versions
  greater than or equal to 2.3.0 and less than 2.4.0.a2 and with
  versions greater than 2.4.0a2.

r26482 | srichter | 2004-07-13 13:07:03 -0400 (Tue, 13 Jul 2004) | 2 lines
   M /Zope3/trunk/src/transaction/__init__.py
   M /Zope3/trunk/src/transaction/_transaction.py
   M /Zope3/trunk/src/transaction/tests/test_transaction.py

Converted XXX to TODO.

r25953 | sidnei | 2004-06-23 13:14:20 -0400 (Wed, 23 Jun 2004) | 1 line
   M /Zope3/trunk/src/ZODB/interfaces.py
   M /Zope3/trunk/src/transaction/_transaction.py

Add missing sortKey method to ZopeDBTransactionManager and DataManagerAdapter,
and also add it to the interface.

r25273 | philikon | 2004-06-06 04:43:57 -0400 (Sun, 06 Jun 2004) | 4 lines
Changed paths:
   M /Zope3/trunk/src/BTrees
   M /Zope3/trunk/src/ZODB
   M /Zope3/trunk/src/persistent

Ignore .so files.

This fix should probably be merged to the original ZODB tree.

These are preliminary 3.3c1 release changes.

Reworked the way some of the ZEO tests use threads, so that unittest is
more likely to notice the real cause of a failure (which usually occurs in
a thread), and less likely to latch on to spurious problems resulting from
the real failure.

Detail:  The TestThread class got the (unittest) test case as an argument,
and remembered it.  If the run() method saw the thread die with an
exception, it called testcase.fail() with the formatted exception.  But
this can't work as apparently intended:  unittest's fail() raises an
AssertionError then, and the piece of unittest running the test expects
to catch that exception and append the message to the result object's
list of failures.  But the piece of unittest running the test isn't on
*this* thread's call stack!  It's on the main thread's call stack.
So unittest simply raised an exception that wasn't noticed by anything,
and the thread died then, leaving a traceback somewhere in the middle
of the output.  unittest didn't know anything about that, and sometimes
thought the test passed despite the thread failure.

Alas, when a thread dies like this it's also got a decent chance of
leaving things in a state where the test's final checking code can't
succeed, but the checking code doesn't know the thread died either,
and spurious unittest failures and errors could get reported then.

Reworked things so that only the main thread ever tries to tell
unittest that a test failed.  A TestThread remembers an exception-
death now, but doesn't report it until the main thread tries to join
it.  This way unittest knows the test failed; records and reports
the true cause of failure; and, because tests generally join all their
threads before doing their final checking, unittest stops the test
before final checking if a thread death occurred, and so there's
less chance of seeing reports of spurious errors and failures.

Repair type in pack() docstring.

repozo improvement suggested by Toby Dickenson.

Write backups to a temp file first; flush and fsync when done;
only then rename; in case of a crash, no relevant damaged file
will be left behind then.  And on Windows, Python's os.fsync()
is necessary to convince the OS to write anything to disk.

Repaired massive lies I introduced about whether fsrefs requires
application code to be available.  Noted that fsrefs also partly
verifies the sanity of the .fs.index file.

Repaired a bug wherein spurious error msgs could be produced after
reporting a problem with an unloadable object (discovered by eyeball,
while staring at the code to figure out what it actually does).

Vastly expanded the module docstring, with a slimmed-down version of
the new fsrefs docs on the ZODB Wiki.

Zope3-dev Collector #139: Memory leak involving buckets and connections

Connection objects were typically immortal because the threaded
transaction manager kept them in ever-growing lists.  Reworked the
transaction manager internals to use a simple implementation of weak sets
instead.  This plugs all leaks in the test program attached to the
collector report (which was leaking about 100KB/sec on my box).

Forward-porting from Zope 2.7.
Merged from 3.3 branch, revision 26085.

The checkFullTimeStamp() test was sensitive to unique mktime() behavior
on FreeBSD.  See:

http://lists.freebsd.org/pipermail/freebsd-standards/2003-November/000268.html 

The purpose of this test is to exercise ZODB's TimeStamp object, so got
rid of dependence on platform mktime() and time.timezone quirks --
TimeStamp works in GMT, so how mktime() treats tm_isdst should be
irrelevant in all TimeStamp tests.

Also added a comment about the highly non-obvious numeric characteristics
of TimeStamp's treatment of seconds (round-tripping is surprisingly
inaccurate, but for a real reason).

New interface IResourceManager intends to combine the
best aspects of IDataManager and IDataManagerOriginal,
and will become "the" interface.
New interface ISavePoint captures (along with models in
collaborations.txt) what should be a clean design for a
savepoint/rollback facility that actually works.