This patch adds support for bridge vlan_protocol.

Example:
$ ip link set br0 type bridge vlan_protocol 802.1ad
$ ip -d link show br0
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default qlen 1000
    link/ether 44:37:e6:ab:cd:ef brd ff:ff:ff:ff:ff:ff promiscuity 0
    bridge forward_delay 0 hello_time 200 max_age 2000 ageing_time 30000
stp_state 0 priority 32768 vlan_filtering 0 vlan_protocol 802.1ad
addrgenmode eui64
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>

* "vti" and "vti6" tunnel modes added to ip-tunnel.8 manual page
* Added "hoplimit" terminology for IPv6
* Corrected usage line
* Minor language fix

This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'.  This is a bit better when you have a
host with lots of interfaces.  Sample output:

$ ip -br link show
lo               UNKNOWN        00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1             UP             08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1             UP             08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1             DOWN           08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1             UP             08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1    UP             08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>

$ ip -br -4 addr show
lo               UNKNOWN        127.0.0.1/8
p2p1             UP             192.168.56.2/24
p7p1             UP             70.0.0.1/24
p8p1             DOWN           80.0.0.1/24
p9p1             UP             10.0.5.15/24
p7p1.100@p7p1    UP             200.0.0.1/24

$ ip -br -6 addr show
lo               UNKNOWN        ::1/128
p2p1             UP             fe80::a00:27ff:feee:b3b/64
p7p1             UP             7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1             DOWN           8000::1/8
p9p1             UP             fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1    UP             fe80::a00:27ff:fe9d:629f/64

$ ip -br addr show p7p1
p7p1             UP             70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64

v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>

Mostly just use of {} and whitespace.

Add little more info about how to manually set priority by iptables,
and some little clarifications about ingress/egress QoS mapping.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Allow user to create a vrf device and specify its table binding.
Based on the iplink_vlan implementation.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>

Formatting JSON is moderately painful.
Provide a simple API to do the syntax formatting.

Add more explanation about VLAN reordering and what it affects.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

The previous man page fixup introduced a syntax error due to missing
opening bracket, which might crash some humanoid BNF parsers.

Fixes: 4e972d5e ("ip-address: fix and extend documentation")
Signed-off-by: Phil Sutter <phil@nwl.cc>

My previous patch 5950ba91 ("lib/namespace: don't leak fd in error case")
was a step in the wrong direction. Instead of closing the opened file
descriptor in error case only, follow a better approach here and close
the fd as soon as it is not used anymore. This way the inelegant goto
statements can be dropped, and the fd leak in non-error case is fixed as
well.

Fixes: 5950ba91 ("lib/namespace: don't leak fd in error case")
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cut one level indentation to make things easier to read.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

Add missing return value to fix warnings
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

Remove unnecessary retrun, because invarg() exit.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

 * Improve manual page synopsis and built-it help
 * Use full subcommand names (e.g. 'address' and 'maddress')
 * Specify when IPv4, IPv6 or both are affected
 * Add lifetimes, home and nodad
 * Remove any remaining excess spaces

Commit 43d29f78 substantially improves generated ip-address.8 instead of
ip-address.8.in and commit e419f2d6 removes the generated one losing the
improvements entirely. This commit recovers the lost changes, adapts
them to the current manual page and adds more man page and help
improvements.

Original commit by: Kenyon Ralph <kenyon@kenyonralph.com>

 * Add `can` to list of supported link types
 * Document `addrgenmode`
 * Document `link-netnsid`
 * Document VLAN link type
 * Improve VXLAN link type documentation
    - Fix VXLAN srcport/dstport docs
    - Document `udpcsum`, `udp6zerocsumtx` and `udp6zerocsumrx`

 * Use unabbreviated `address` and `maddress`
 * Keep only `-n` and `-netns` for network namespace

Enhance promtp message for 'spoofchk' and 'query_rss' flag, and fix a
typo.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

No need for extern on function prototypes.

Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

This was working before, but only if realloc a) succeeded and b) did not
move the buffer to a different location. ''**buf = **new_buf' then
writes the value of *new_buf's first field into that of *buf.
Signed-off-by: Phil Sutter <phil@nwl.cc>

This patch implements support for the IFLA_BR_VLAN_FILTERING attribute
in iproute2 so it can enable/disable vlan_filtering.

Example:
$ ip link set br0 type bridge vlan_filtering 1
$ ip -d link show br0
6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default
    link/ether 08:00:27:ea:07:38 brd ff:ff:ff:ff:ff:ff promiscuity 0
    bridge forward_delay 1500 hello_time 200 max_age 2000 vlan_filtering 1
    addrgenmode eui64
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

When showing bridge attributes, show also ageing_time, stp_state and
priority if available.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

fix a typo: "noarp" -> "arp"
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

Allow to print link type usage by: ip link help bridge_slave
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

Allow to print link type usage by: ip link help bridge
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

Add missing link type "bridge_slave".
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>