Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Gregoire Baron <baronchon@n7mm.org>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Listing generic 'ip' options in subcommand man pages is redundant and
error-prone, as they won't be kept in sync anyway. Since many other man
pages don't list them either, drop references to them in the remaining
ones.
Signed-off-by: Phil Sutter <phil@nwl.cc>

The 'ADDR' part of 'local' and 'remote' parameters is not optional, but
may also consist of the word 'any'. While at it, add missing whitespace
and fix fonts.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Namely, 'extra-flag' of 'ip xfrm state' and 'flag' of 'ip xfrm policy'.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Also drop the non-terminal 'TIME' description as it is not referenced
anywhere.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Drop unnecessary curly braces around single action keywords, point out
that 'dev' parameter to 'ip token get' is optional and clarify that 'ip
token' defaults to 'list' action.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Clarify that 'ip rule' defaults to action 'list', that 'flush' and
'save' actions don't accept additional parameters, add missing 'not' and
'goto' keywords and finally fix fonts used in 'fwmark' and 'realms'
parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>

The first line contained a c'n'p error, incorrectly listing 'ip address'
syntax. Since PARAMS is used just once and there are not many other
parameters to 'ip ntable change', state them inline and in addition to
that clarify the possibility to pass multiple parameters at once.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Use brackets to show that 'ip netns' defaults to action 'list', drop
superfluous curly braces around 'set' action keyword.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Reflect that it is possible to pass multiple parameters at the same
time, also use the same trick the help text uses to emphasize vf
specific parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>

We commonly use bold font for terminals and italic for non-terminals.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Clarify that the optional '-' prefix of the 'tentative', 'deprecated'
and 'dadfailed' keywords has to be put right in front of them, no
whitespace is allowed in between.

In addition to that, clarify that it is valid to pass both 'valid_lft'
and 'preferred_lft' at the same time to 'ip address'.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

This is a bit pedantic, but brackets ([]) show optional values and since
TYPE must not become empty, they're not suited to surround the type
keyword choices. Use curly braces instead.

Also add some missing whitespace to the parameter list above.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

And while we're at it, add whitespace around braces and pipe symbol.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Get rid of extraneous closing brackets and while here, merge the double
netns parameter.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Neither 'list' nor 'flush' actions accept parameters, and with given
prefix the action keyword is not optional anymore.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Although the ip command accepts both "neighbor" and "neighbour" as
subcommand, I assume it's sufficient to list it in help text as just
"neigh" like ip.8 does.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

The help text was misleading: One could think it is possible to list
rules by selector, which would be nice but isn't. This change also
clarifies that 'ip rule' defaults to 'list' if no further arguments are
given.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Add IFLA_VF_TRUST message to trust the VF.
PF can accept some privileged operation from the trusted VF.
For example, ixgbe PF doesn't allow to enable VF promiscuous mode until
the VF is trusted because it may hurt performance.

To trust VF.
 # ip link set dev eth0 vf 1 trust on

To untrust VF.
 # ip link set dev eth0 vf 1 trust off
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>

invarg exits so no need to return, remove this c&p error from my recent
patches
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch is a follow up to the recently added
'static' fdb option.

It introduces a new option 'dynamic' which adds
dynamic fdb entries with NUD_REACHABLE.

$bridge fdb add 00:01:02:03:04:06 dev eth0 master dynamic

$bridge fdb show
00:01:02:03:04:06 dev eth0

This patch also documents all fdb types. Removes 'temp'
from usage message since it is now replaced by 'static'.
'temp' still works and is synonymous with static.
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

b3 buffer has been deleted previously so b2 is followed by b4
which is not consistent.
Signed-off-by: Dmitrii Shcherbakov <fw.dmitrii@yandex.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>

Remove printing according to the previously used encoding of mpu and
overhead values within the tc_ratespec's mpu field. This encoding is
no longer being used as a separate 'overhead' field in the ratespec
structure has been introduced.
Signed-off-by: Dmitrii Shcherbakov <fw.dmitrii@yandex.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>

Add support to be able to view and change IFLA_BRPORT_FAST_LEAVE
port attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Add support to be able to view and change IFLA_BRPORT_MULTICAST_ROUTER port
attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Add support to be able to view and change IFLA_BRPORT_PROXYARP_WIFI port
attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Add support to be able to view and change IFLA_BRPORT_PROXYARP port
attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Export all the read-only values that get returned about a bridge port
such as the timers, the ids, designated_port and cost,
topology_change_ack and config_pending. For the bridge ids the
br_dump_bridge_id function is exported from iplink_bridge.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

netns_map_add() does a malloc of (sizeof (struct nsid_cache) +
strlen(name)) and then proceed with strcpy() of name into the
zero-length member at the end of the nsid_cache structure.  The
nul-terminator is written outside of the allocated memory and may
overwrite the allocator's internal structure.

This can trigger a segmentation fault on i386 uclibc with names of size 8:
after the corruption occurs, the call to closedir() on netns_map_init()
crashes while freeing the DIR structure.

Here is the relevant valgrind output:

==1251== Memcheck, a memory error detector
==1251== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==1251== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright
info
==1251== Command: ./ip netns
==1251==
==1251== Invalid write of size 1
==1251==    at 0x4011975: strcpy (in
/usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==1251==    by 0x8058B00: netns_map_add (ipnetns.c:181)
==1251==    by 0x8058E2A: netns_map_init (ipnetns.c:226)
==1251==    by 0x8058E79: do_netns (ipnetns.c:776)
==1251==    by 0x804D9FF: do_cmd (ip.c:110)
==1251==    by 0x804D814: main (ip.c:300)

This reverts commit f9dec657.

Since this code is not in upstream kernel, it shouldn't be in iproute2

This patch adds support to add mpls multipath
routes.

example:
ip -f mpls route add 100 \
	nexthop as 200 via inet 10.1.1.2 dev swp1 \
	nexthop as 700 via inet 10.1.1.6 dev swp2
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>