This patch allows the user to specify the vlan of the mdb group being
added or deleted and adds support for displaying the vlan when
dumping mdb information or monitoring it. It also updates the man page
to reflect the new "vid" argument for mdb.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch adds support to set and display protodown on a switch port. The
switch driver can handle this error state by doing a phys down on the port.

One example user space application setting this flag is a multi-chassis
LAG application to handle split-brain situation on peer-link failure.

Example:
root@net-next:~# ip link set eth1 protodown on
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff protodown on
root@net-next:~/iproute2# ip link set eth1 protodown off
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff
root@net-next:~/iproute2#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>

Prefer using the POSIX constant PATH_MAX instead of the legacy BSD
derived MAXPATHLEN. The necessary includes for MAXPATHLEN and PATH_MAX
are <sys/param.h> and <limits.h>, respectively.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>

This patch adds support for ADDMDB/DELMDB notifications about router ports
which have been added or deleted/expired respectively.

Example output:
$ bridge -s monitor mdb
Deleted router port dev eth3 master br0
router port dev eth3 master br0
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Make sure that return value of each socket() call is properly checked
and do not continue processing if the call failed.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

Remove dupldated include for <linux/xfrm.h>, since it's already
included by 'xfrm.h'.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>

Error was:
f_bpf.o: In function `bpf_parse_opt':
f_bpf.c:(.text+0x88f): undefined reference to `secure_getenv'
m_bpf.o: In function `parse_bpf':
m_bpf.c:(.text+0x587): undefined reference to `secure_getenv'
collect2: error: ld returned 1 exit status

There is no special reason to use the secure version of getenv, thus let's
simply use getenv().

CC: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 88eea539 ("tc: {f,m}_bpf: allow to retrieve uds path from env")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>

Really by default ss dumps not only TCP sockets but any kind of socket
which is in ESTABLISHED state (TCP/UDP/UNIX).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reported-by: Miha Marolt <miham@beyondsemi.com>

Zhang Shengju some places where tabs were not being used.
Go ahead and fix all the trival checkpatch warnings in ip/ip.c
Also fix bridge.c

It really partially reverts:

    ec4d0d8a (ss: Replace unixstat struct by new sockstat struct)

but adds few fields (name & peer_name) from removed unixstat to sockstat struct to easy
return original code.

Fixes: ec4d0d8a (ss: Replace unixstat struct by new sockstat struct)
Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Since free(NULL) is a no-op, it is safe to remove unnecesary
if checks.

We forgot to include this patch somehow. So do it now.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>

After commit 8250bc9f ("ss: Unify inet sockets output") raw sockets
are displayed as udp because dgram_show_line() is used for both and
thus IPPROTO_UDP is used for both so proto_name() returns "udp".
Fix this by checking dg_proto which is set according to the caller of
dgram_show_line().
Reported-by: Miha Marolt <miham@beyondsemi.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch replaces exits with returns in
ip route get command handling. This allows batching
of ip route get commands.

$cat route_get_batch.txt
route get 10.0.14.2
route get 12.0.14.2
route get 10.0.14.4

$ip -batch route_get_batch.txt
local 10.0.14.2 dev lo  src 10.0.14.2
    cache <local>
12.0.14.2 via 192.168.0.2 dev eth0  src 192.168.0.15
    cache
10.0.14.4 dev dummy0  src 10.0.14.2
    cache
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

The build otherwise fails if libmnl does not directly live in a
standard search path.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>

if_tun: new ioctl value
libc-compat.h: add definitions for kernel build

Copy of kernel include/uapi/linux/tipc.h is needed to build on systems
with pre-3.16 kernel headers.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>

Add a start of a man-page to the misc section as a reference and
guide on (e)BPF classifier and actions. Given that tc is only tersely
documented, this is provided in the hope that users will have an
easier getting started with tc and (e)BPF. And, that there's now more
incentive for others to also start documenting their classifier and
actions as well. ;)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>

If available and set, print 'v6only:1' for AF_INET6 sockets upon request
of extended information. For IPv6 sockets bound to in6addr_any, this is
the only way to determine if they will also accept IPv4 requests or not.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Andy Gospodaerk <gospo@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>

Use the IPv4/IPv6/TCP/UDP multicast groups of NETLINK_SOCK_DIAG
to filter and display socket statistics as they are destroyed.

Kernel support patch series: 24029a3603cfa633e8bc2b3fb3e48e76c497831d
Signed-off-by: Craig Gallek <kraig@google.com>

This patch adds support to set bridge stp priority via IFLA_BR_PRIORITY.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>

This patch adds support to set stp_state via IFLA_BR_STP_STATE.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>

This patch adds support to set ageing_time via IFLA_BR_AGEING_TIME.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>

This patch adds support to retrieve the new bond slave attributes:
IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE
IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE
which are read-only.

(Removed if_link.h changes already updated in net-next)
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>

Enable reading and displaying SRIOV VFs traffic statistics through
the host PF netdevice using the nested IFLA_VF_STATS attribute.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>

This patch fixes incorrect -EINVAL errors due to invalid
scope and type during mpls route deletes.

$ip -f mpls route add 100 as 200 via inet 10.1.1.2 dev swp1

$ip -f mpls route show
100 as to 200 via inet 10.1.1.2 dev swp1

$ip -f mpls route del 100 as 200 via inet 10.1.1.2 dev swp1
RTNETLINK answers: Invalid argument

$ip -f mpls route del 100
RTNETLINK answers: Invalid argument

After patch:

$ip -f mpls route show
100 as to 200 via inet 10.1.1.2 dev swp1

$ip -f mpls route del 100 as 200 via inet 10.1.1.2 dev swp1

$ip -f mpls route show

Always set type to RTN_UNICAST for mpls route add/deletes.
Also to keep things consistent with kernel set scope to
RT_SCOPE_UNIVERSE for both mpls and ipv6 routes. Both mpls and ipv6 route
deletes ignore scope.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

Two new tcp_info fields: tcpi_segs_in and tcpi_segs_out.
(2efd055c53c06b7e89c167c98069bab9afce7e59)

~: ss -ti src :22
	 cubic wscale:7,6 rto:201 rtt:0.244/0.012 ato:40 mss:1418 cwnd:21 bytes_acked:80605 bytes_received:20491 segs_out:414 segs_in:600 send 976.3Mbps lastsnd:23 lastrcv:23 lastack:22 pacing_rate 1952.7Mbps rcv_rtt:98 rcv_space:28960
Signed-off-by: Craig Gallek <kraig@google.com>
Reviewed-by: Marcelo Ricardo Leitner <mleitner@redhat.com>

This update is to santized kernel headers from net-next.
With one change for fixing the in.h header incompatiablity
(already sent upstream).

Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

Allow to retrieve uds path from the environment, facilitates
also dealing with export a bit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Kernel commit 04fd61ab36ec ("bpf: allow bpf programs to tail-call other
bpf programs") added support for tail calls, this patch here adds tc
front end parts for the object parser to prepopulate a given eBPF prog
array before the root prog is pushed down for classifier creation. The
prepopulation works with any number of prog arrays in any dependencies,
e.g. prog or normal maps could also be used from progs that are
tail-called themself, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>