There have been reports about 'ip addr' printing "Message truncated" on
systems with large numbers of VFs. Although I haven't been able to get
my hands on hardware suitable to reproduce this, increasing the dump
buffer has been reported to resolve the issue. For want of a better
idea, just double the buffer size to 32k.

Feels like this opportunistic buffer size selection is rather
workarounding a design flaw in libnetlink or maybe even the netlink
protocol itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Since the relevant code (and it's bugs) is identical in both files, fix
them in one go. This patch fixes multiple issues:

* Using 'int' for the 'tdiff' variable does not suffice on 64bit
  systems, the assigned initial time difference makes it wrap and
  contain a negative value afterwards. Instead use the more appropriate
  'time_t' type.

* As far as I understood the code, poll() is supposed to time out just
  at the right time to trigger update_db() in the configured interval.
  Therefore it's timeout must be set to the desired interval *minus* the
  time that has already passed since then.

* With the last change to the algorithm in place, it does not make sense
  to call update_db() before returning data to the connected client.
  Actually, it never does otherwise we could skip the periodic updates
  in the first place.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

To not make the output overly confusing, list them in a definition of
the STATE placeholder which is already used in the show/flush syntax but
wasn't explained before.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Not sure how useful they are in practice, but as 'ip neigh' supports
setting them all, they deserve to be described as well.

While at it, also add a missing layer of indentation to the subordinate
nud state list.
Signed-off-by: Phil Sutter <phil@nwl.cc>

The documentation is wrong here: it is indeed possible to remove policy
rule 0 and recreate it afterwards. Therefore remove these statements.
Signed-off-by: Phil Sutter <phil@nwl.cc>

While the synopsis section contains 'ip route list', it is later
described as 'ip route show'. Make this consistent by replacing 'list'
with 'show' in synopsis.
Signed-off-by: Phil Sutter <phil@nwl.cc>

This seems to have been a hidden feature, though it's very useful and
necessary at least when combining multiple pedit actions.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Gregoire Baron <baronchon@n7mm.org>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Listing generic 'ip' options in subcommand man pages is redundant and
error-prone, as they won't be kept in sync anyway. Since many other man
pages don't list them either, drop references to them in the remaining
ones.
Signed-off-by: Phil Sutter <phil@nwl.cc>

The 'ADDR' part of 'local' and 'remote' parameters is not optional, but
may also consist of the word 'any'. While at it, add missing whitespace
and fix fonts.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Namely, 'extra-flag' of 'ip xfrm state' and 'flag' of 'ip xfrm policy'.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Also drop the non-terminal 'TIME' description as it is not referenced
anywhere.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Drop unnecessary curly braces around single action keywords, point out
that 'dev' parameter to 'ip token get' is optional and clarify that 'ip
token' defaults to 'list' action.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Clarify that 'ip rule' defaults to action 'list', that 'flush' and
'save' actions don't accept additional parameters, add missing 'not' and
'goto' keywords and finally fix fonts used in 'fwmark' and 'realms'
parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>

The first line contained a c'n'p error, incorrectly listing 'ip address'
syntax. Since PARAMS is used just once and there are not many other
parameters to 'ip ntable change', state them inline and in addition to
that clarify the possibility to pass multiple parameters at once.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Use brackets to show that 'ip netns' defaults to action 'list', drop
superfluous curly braces around 'set' action keyword.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Reflect that it is possible to pass multiple parameters at the same
time, also use the same trick the help text uses to emphasize vf
specific parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>

We commonly use bold font for terminals and italic for non-terminals.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Clarify that the optional '-' prefix of the 'tentative', 'deprecated'
and 'dadfailed' keywords has to be put right in front of them, no
whitespace is allowed in between.

In addition to that, clarify that it is valid to pass both 'valid_lft'
and 'preferred_lft' at the same time to 'ip address'.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

This is a bit pedantic, but brackets ([]) show optional values and since
TYPE must not become empty, they're not suited to surround the type
keyword choices. Use curly braces instead.

Also add some missing whitespace to the parameter list above.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

And while we're at it, add whitespace around braces and pipe symbol.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Get rid of extraneous closing brackets and while here, merge the double
netns parameter.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Neither 'list' nor 'flush' actions accept parameters, and with given
prefix the action keyword is not optional anymore.
Signed-off-by: Phil Sutter <phil@nwl.cc>