- 14 Aug, 2015 2 commits
-
-
Stephen Hemminger authored
-
Zhang Shengju authored
Add missing return value to fix warnings Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
-
- 13 Aug, 2015 8 commits
-
-
Stephen Hemminger authored
-
Stephen Hemminger authored
-
Zhang Shengju authored
Remove unnecessary retrun, because invarg() exit. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
-
Pavel Šimerda authored
* Improve manual page synopsis and built-it help * Use full subcommand names (e.g. 'address' and 'maddress') * Specify when IPv4, IPv6 or both are affected * Add lifetimes, home and nodad * Remove any remaining excess spaces Commit 43d29f78 substantially improves generated ip-address.8 instead of ip-address.8.in and commit e419f2d6 removes the generated one losing the improvements entirely. This commit recovers the lost changes, adapts them to the current manual page and adds more man page and help improvements. Original commit by: Kenyon Ralph <kenyon@kenyonralph.com>
-
Pavel Šimerda authored
* Add `can` to list of supported link types * Document `addrgenmode` * Document `link-netnsid` * Document VLAN link type * Improve VXLAN link type documentation - Fix VXLAN srcport/dstport docs - Document `udpcsum`, `udp6zerocsumtx` and `udp6zerocsumrx`
-
Pavel Šimerda authored
* Use unabbreviated `address` and `maddress` * Keep only `-n` and `-netns` for network namespace
-
Zhang Shengju authored
Enhance promtp message for 'spoofchk' and 'query_rss' flag, and fix a typo. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
-
Stephen Hemminger authored
No need for extern on function prototypes.
-
- 12 Aug, 2015 16 commits
-
-
Phil Sutter authored
Signed-off-by: Phil Sutter <phil@nwl.cc>
-
Phil Sutter authored
Signed-off-by: Phil Sutter <phil@nwl.cc>
-
Phil Sutter authored
Signed-off-by: Phil Sutter <phil@nwl.cc>
-
Phil Sutter authored
Signed-off-by: Phil Sutter <phil@nwl.cc>
-
Phil Sutter authored
This was working before, but only if realloc a) succeeded and b) did not move the buffer to a different location. ''**buf = **new_buf' then writes the value of *new_buf's first field into that of *buf. Signed-off-by: Phil Sutter <phil@nwl.cc>
-
Nikolay Aleksandrov authored
This patch implements support for the IFLA_BR_VLAN_FILTERING attribute in iproute2 so it can enable/disable vlan_filtering. Example: $ ip link set br0 type bridge vlan_filtering 1 $ ip -d link show br0 6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default link/ether 08:00:27:ea:07:38 brd ff:ff:ff:ff:ff:ff promiscuity 0 bridge forward_delay 1500 hello_time 200 max_age 2000 vlan_filtering 1 addrgenmode eui64 Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-
Stephen Hemminger authored
-
Stephen Hemminger authored
-
Nikolay Aleksandrov authored
When showing bridge attributes, show also ageing_time, stp_state and priority if available. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-
Stephen Hemminger authored
-
Zhang Shengju authored
fix a typo: "noarp" -> "arp" Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
-
Zhang Shengju authored
Allow to print link type usage by: ip link help bridge_slave Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
-
Zhang Shengju authored
Allow to print link type usage by: ip link help bridge Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
-
Zhang Shengju authored
Add missing link type "bridge_slave". Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
-
Phil Sutter authored
Change '-human-readble' to '-human-readable'. Signed-off-by: Phil Sutter <phil@nwl.cc>
-
Stephen Hemminger authored
Save some space by using variable size for nsid cache elements. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-
- 10 Aug, 2015 6 commits
-
-
Stephen Hemminger authored
-
Phil Sutter authored
Signed-off-by: Phil Sutter <phil@nwl.cc>
-
Nikolay Aleksandrov authored
Add support to be able to set and show the value of tlb_dynamic_lb (IFLA_BOND_TLB_DYNAMIC_LB). Example: $ ip -d link show dev bond0 type bond 7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether ce:2f:e1:6e:d7:e0 brd ff:ff:ff:ff:ff:ff promiscuity 0 bond mode balance-tlb miimon 100 updelay 0 downdelay 0 use_carrier 1 arp_interval 0 arp_validate none arp_all_targets any primary_reselect always fail_over_mac none xmit_hash_policy layer2 resend_igmp 1 num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1 packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 1 addrgenmode eui64 $ ip -d l set dev bond0 type bond tlb_dynamic_lb 0 $ ip -d link show dev bond0 type bond 7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether ce:2f:e1:6e:d7:e0 brd ff:ff:ff:ff:ff:ff promiscuity 0 bond mode balance-tlb miimon 100 updelay 0 downdelay 0 use_carrier 1 arp_interval 0 arp_validate none arp_all_targets any primary_reselect always fail_over_mac none xmit_hash_policy layer2 resend_igmp 1 num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1 packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 0 addrgenmode eui64 Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-
Stephen Hemminger authored
-
Daniel Borkmann authored
Frontend support for kernel commit a5c90b29e5cc ("act_bpf: properly support late binding of bpf action to a classifier"). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Richard Alpe authored
One option is required for bearer set and bearer get.
-
- 01 Aug, 2015 5 commits
-
-
Stephen Hemminger authored
Align with upstream kernel.
-
Nikolay Aleksandrov authored
Before this patch both addmdb and delmdb events were printed the same, now we'll get a "Deleted" string in front when delmdb is received. Before: $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 (monitor) dev br0 port eth3 grp 239.0.0.1 temp $ bridge mdb del dev br0 port eth3 grp 239.0.0.1 (monitor) dev br0 port eth3 grp 239.0.0.1 temp ^^ No way to differentiate between both events. After: $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 (monitor) dev br0 port eth3 grp 239.0.0.1 temp $ bridge mdb del dev br0 port eth3 grp 239.0.0.1 (monitor) Deleted dev br0 port eth3 grp 239.0.0.1 temp Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-
Stephen Hemminger authored
-
Antti Paila authored
Reset the 'preferred_family' global variable to its initially set value before each batch file command is processed. Signed-off-by: Antti Paila <antti.paila@gmail.com>
-
Roopa Prabhu authored
This is similar to command options corresponding to other NTF_* flags already exposed to the user space (examples self/master). Also updates bridge man page (The man page patch also includes a fix to the 'self' entry and documents 'master' for fdb entries) Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-
- 28 Jul, 2015 3 commits
-
-
Stephen Hemminger authored
Left over copy/paste from ip monitor man page.
-
Nikolay Aleksandrov authored
This patch allows the user to specify the vlan of the mdb group being added or deleted and adds support for displaying the vlan when dumping mdb information or monitoring it. It also updates the man page to reflect the new "vid" argument for mdb. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-
Anuradha Karuppiah authored
This patch adds support to set and display protodown on a switch port. The switch driver can handle this error state by doing a phys down on the port. One example user space application setting this flag is a multi-chassis LAG application to handle split-brain situation on peer-link failure. Example: root@net-next:~# ip link set eth1 protodown on root@net-next:~/iproute2# ip link show eth1 4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff protodown on root@net-next:~/iproute2# ip link set eth1 protodown off root@net-next:~/iproute2# ip link show eth1 4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff root@net-next:~/iproute2# Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
-