Introduce new option -c[ompressvlans] to request
vlan ranges from kernel

(pls suggest better option names if this does not look ok)

$bridge vlan show
port	vlan ids
dummy0	 1 PVID Egress Untagged

dummy1	 1 PVID Egress Untagged
	 2
	 3
	 4
	 5
	 6
	 7
	 9
	 10
	 12

br0	 1 PVID Egress Untagged

$bridge help
Usage: bridge [ OPTIONS ] OBJECT { COMMAND | help }
where  OBJECT := { link | fdb | mdb | vlan | monitor }
       OPTIONS := { -V[ersion] | -s[tatistics] | -d[etails] |
                    -o[neline] | -t[imestamp] | -n[etns] name |
                    -c[ompressvlans] }
$bridge -c vlan show
port	vlan ids
dummy0	 1 PVID Egress Untagged

dummy1	 1 PVID Egress Untagged
	 2-7
	 9-10
	 12

br0	 1 PVID Egress Untagged
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

This patch adds vlan range support to bridge add command
using the newly added vinfo flags BRIDGE_VLAN_INFO_RANGE_BEGIN and
BRIDGE_VLAN_INFO_RANGE_END.

$bridge vlan show
port    vlan ids
br0      1 PVID Egress Untagged

dummy0   1 PVID Egress Untagged

$bridge vlan add vid 10-15 dev dummy0
port    vlan ids
br0      1 PVID Egress Untagged

dummy0   1 PVID Egress Untagged
         10
         11
         12
         13
         14
         15

$bridge vlan del vid 14 dev dummy0

$bridge vlan show
port    vlan ids
br0      1 PVID Egress Untagged

dummy0   1 PVID Egress Untagged
         10
         11
         12
         13
         15

$bridge vlan del vid 10-15 dev dummy0

$bridge vlan show
port    vlan ids
br0      1 PVID Egress Untagged

dummy0   1 PVID Egress Untagged
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>

Signed-off-by: Thomas Graf <tgraf@suug.ch>

"ip addr show up" would exclude the interface (link), but include the
addresses of down interfaces (which looked like they where indented
under a different interface). This fixes the filtering.

For a full example see the original bug report at:
http://bugs.debian.org/776040Reported-by: Paul Slootman <paul@debian.org>
CC: 776040@bugs.debian.org
Signed-off-by: Andreas Henriksson <andreas@fatal.se>

Allow delete all namespace names by:

    $ ip -all netns del
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

This change allows to exec some cmd on each
named netns (except default) by specifying '-all' option:

    # ip -all netns exec ip link

Each command executes synchronously.

Exit status is not considered, so there might be a case
that some CMD can fail on some netns but success on the other.

EXAMPLES:

1) Show link info on all netns:

$ ip -all netns exec ip link

netns: test_net
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
    link/ether 1a:19:6f:25:eb:85 brd ff:ff:ff:ff:ff:ff

netns: home0
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
    link/ether ea:1a:59:40:d3:29 brd ff:ff:ff:ff:ff:ff

netns: lan0
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
    link/ether ce:49:d5:46:81:ea brd ff:ff:ff:ff:ff:ff

2) Set UP tap0 device for the all netns:

$ ip -all netns exec ip link set dev tap0 up

netns: test_net

netns: home0

netns: lan0
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Added possibility to run some func on each netns.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Pull in headers from later tree

Sanitized header from upstream 3.20-rc kernel

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Added two tests which checks the following fixed issues:

    1) Bug when not possible add new virtual interface via:

        $ ip link add dev XXX type

       It was fixed a few releases ago.

    2) Crash on older kernels when VF rate info does not exist:

        $ ip link show

       Used dump file from William Dauchy <william@gandi.net>:
           testsuite/tests/ip/link/dev_wo_vf_rate.nl

       So 'ip link show' replaced by 'ip -d monitor file ...' which does
       the same thing.

Also added new func in testsuite/lib/generic.sh to gen new random dev name.

Added 'clean' dependency on running all tests.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

As inet dgram sockets (udp, raw) can call connect(...)  - they
might be set in ESTABLISHED state. So keep the original behaviour of
'ss' which filtered them by ESTABLISHED state by default. So:

    $ ss -u

    or

    $ ss -w

Will show only ESTABLISHED UDP sockets by default.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

When HAVE_SETNS is not set, iproute2 provides a local implementation of this
function based on __NR_setns.
This macro is defined in sys/syscall.h, which was not included, thus the local
implementation always returned -1.

CC: Vadim Kochan <vadim4j@gmail.com>
Fixes: eb67e449 ("lib: Add netns_switch func for change network namespace")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Warning was:
In file included from bridge.c:16:0:
../include/namespace.h:33:12: warning: ‘setns’ defined but not used [-Wunused-function]

CC: Vadim Kochan <vadim4j@gmail.com>
Fixes: eb67e449 ("lib: Add netns_switch func for change network namespace")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

In the ip-link(8) man page, for the gretap, ip6gre, and ip6gretap types, the
word tunnel was incorrectly spelled 'tuunel'.
Signed-off-by: Reese Moore <ram@vt.edu>

Need to check for invalid address and buffer overrun in ip neigh
command with invalid paramters.

This patch adds configuration and dumping of congestion control metric
for ip route, for example:

  ip route add <dst> dev foo congctl [lock] dctcp

Reference: http://thread.gmane.org/gmane.linux.network/344733Signed-off-by: Daniel Borkmann <dborkman@redhat.com>

Renamed get_netns_fd -> netns_get_fd and moved to
lib/namespace.c
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Add #define for nlmsg_type = 15
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

When 'ss' prints UDP sockets info together with RAW sockets
e.g.:

    $ ss -a

then UDP sockets are resolved as "ipproto-xxx".

It was caused that dg_proto was set after printing UDP
socket info from netlink. So fixed issue by moving
setting dg_proto before printing info from Netlink.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

The issue was caused that ifla_vf_rate does not exist on
older kernels and should be checked if it exists as nested attr.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reported-by: William Dauchy <william@gandi.net>
Tested-by: William Dauchy <william@gandi.net>

When specified in a graph such as:
action vlan ... action foobar
the vlan action chewed more than it can swallow
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>

addrgenmode is currently write only by ip. So display this information
if provided by kernel as well.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>

This patch fixes some filtering combinations issues which does not
work on the 'master' version:

    $ ss -4
    shows inet & unix sockets, instead of only inet sockets

    $ ss -u
    needs to specify 'state closed'

    $ ss src unix:*X11*
    needs to specify '-x' shortcut for UNIX family

    $ ss -A all
    shows only sockets with established states

There might some other issues which was not observed.

Also changed logic for calculating families, socket types and
states filtering. I think that this version is a little simpler
one. Now there are 2 predefined default tables which describes
the following maping:

    family  -> (states, dbs)
    db      -> (states, families)
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Refactored to use one func for output packet stats info
from both /proc and netlink.

Added possibility to get packet stats info from /proc
by setting environment variable PROC_ROOT or PROC_NET_PACKET.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Refactored to use one func for output unix stats info
from both /proc and netlink.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Sometimes, it is more convenient to get only one specific nested attribute by
type. For example for IFLA_AF_SPEC where type is address family (AF_INET6).
So add this helper for this purpose.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>

Suggested by Vadim Kochan

v2:

Resending now that the dust has cleared in 3.18 on "self" vs. hwmode debate for
brport settings.  learning_sync is now set/cleared using "self" qualifier on
brport.

v1:

Add 'learned_sync' flag to turn on/off syncing of learned MAC addresses from
offload device to bridge's FDB.   Flag is be set/cleared on offload device port
using "self" qualifier:

  $ sudo bridge link set dev swp1 learning_sync on self

  $ bridge -d link show dev swp1
  2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0 state forwarding priority 32 cost 2
      hairpin off guard off root_block off fastleave off learning off flood off
  2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0
      learning on learning_sync on

Adds new IFLA_BRPORT_LEARNED_SYNCED attribute for IFLA_PROTINFO on the SELF
brport.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>

Stolen from generated doc/ss.html
Also added reference to RFC 793 for TCP states.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>