The goal of this patch is to test during the runtime if the command RTM_GETNSID
is supported by the kernel.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

This reverts commit d116ff34.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

This reverts commit d059de70.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Fixes: d116ff34 ("ip netns: Fix rtnl error while print netns list")
Signed-off-by: Jiri Benc <jbenc@redhat.com>

Result of the following command:

    sed -ri 's/\.  /. /g' man/*/*
Signed-Off-By: Pavel Šimerda <psimerda@redhat.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Output of the usage was shifted be cause of missing TAB
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

If '-nm' specified that do not fail if there is no
default class names file in /etc/iproute2.

Changed default class name file cls_names -> tc_cls.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Next argument after the tc opcode/verdict is optional, using NEXT_ARG()
requires to have another argument after that one otherwise tc will bail
out. Therefore, we need to advance to the next argument manually as done
elsewhere.

Fixes: 86ab59a6 ("tc: add support for BPF based actions")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Pirko <jiri@resnulli.us>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

commit f3a2ddc1 ("lib utils: Use helpers to get AF bit/byte len")
used a wrong family or family of zero in the default case
during af_bit_len calculation causing ip route commands to
fail with below error

Error: an inet prefix is expected rather than "10.0.2.14/24".
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

Don't insert newline in -o (oneline) mode; print mark as hex.

Oneline mode is supposed to force all output to be on oneline and
machine-parsable, but this isn't the case for "ip xfrm" as shown:

% ip -o xfrm monitor
...
src 0.0.0.0/0 dst 0.0.0.0/0 \   dir out priority 2051 ptype main \  mark -1879048191/0xffffffff
    tmpl src 203.0.130.10 dst 198.51.130.30\        proto esp reqid 16384 mode tunnel\
...

as that's 2 lines, not one. Also, the "mark" is shown in signed
decimal, but the mask is in hex. This is confusing: let's use
hex for both.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

This patch replaces exits with returns in several
iproute2 commands. This fixes `ip -batch -force`
to not exit but continue on errors.

$cat c.txt
route del 1.2.3.0/24 dev eth0
route del 1.2.4.0/24 dev eth0
route del 1.2.5.0/24 dev eth0
route add 1.2.3.0/24 dev eth0

$ip -force -batch c.txt
RTNETLINK answers: No such process
Command failed c.txt:2
RTNETLINK answers: No such process
Command failed c.txt:3
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

While looking at the manpage, I noticed a reference to 'embedded' that was
added by this commit:

	commit d611682a
	Author: John Fastabend <john.r.fastabend@intel.com>
	Date:   Thu Sep 13 23:50:36 2012 -0700

	    iproute2: bridge: finish removing replace option in man pages

I no longer see any reference to the 'embedded' option in any c- or h-files, so
it seems worthwhile to remove.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
CC: John Fastabend <john.r.fastabend@intel.com>

Where used in the ip tool, the 'show' option always has the synonyms
'list' and 'lst', except for ip-token and ip-addrlabel, which are missing
'lst'. Add this as a synonym for these commands.
Signed-off-by: Mark Einon <mark.einon@gmail.com>

It is possible to use class names from file /etc/iproute2/cls_names
which tc will use when showing class info:

    # tc/tc -nm class show dev lo
	class htb 1:10 parent 1:1 leaf 10: prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 1600b
	class htb 1:1 root rate 6Mbit ceil 6Mbit burst 15Kb cburst 1599b
	class htb web#1:20 parent 1:1 leaf 20: prio 0 rate 3Mbit ceil 6Mbit burst 15Kb cburst 1599b
	class htb 1:2 root rate 6Mbit ceil 6Mbit burst 15Kb cburst 1599b
	class htb 1:30 parent 1:1 leaf 30: prio 0 rate 1Kbit ceil 6Mbit burst 15Kb cburst 1599b
	class htb voip#1:40 parent 1:2 leaf 40: prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 1600b
	class htb 1:50 parent 1:2 leaf 50: prio 0 rate 3Mbit ceil 6Mbit burst 15Kb cburst 1599b
	class htb 1:60 parent 1:2 leaf 60: prio 0 rate 1Kbit ceil 6Mbit burst 15Kb cburst 1599b

or to specify via file path:

    # tc/tc -nm -cf /tmp/cls_names class show dev lo

Class names file contains simple "maj:min  name" structure:

1:20    web
1:40    voip
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Observed on the Linux 3.18:

    # ip netns
    RTNETLINK answers: Operation not supported
    net0

CC: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: d182ee13 ("ipnetns: allow to get and set netns ids")
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Added funcs to get AF_XXX len in bit/bytes and replace
places where switch(AF_XXX) is used for this.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Socket cookies are 64bit, even if ss happens to be
a 32bit binary, running on a 64 bit host.
Signed-off-by: Eric Dumazet <edumazet@google.com>

Ugly change but it allows to specify sport/dport w/o ':'

    # ss dport = 80 and sport = 44862
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Also added some trivial form of the ID as "major:minor",
just for visualisation of explained words.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Added some clarification why 'ip link set netns' can not
change network namespace for some kind of devices.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Left-overs when copying this over from cls_bpf. ;) Lets remove them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>

Add missing GUE/FOU manpages to Makefile
Signed-off-by: Ebben Aries <exa@fb.com>

This patch adds support to specify 'master' keyword,
to target a bridge link command explicitly to the software
bridge driver.

Adds self/master keywords to usage and man page

v2:
	fix usage to say (self and master) and not (self or master)
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Keep ss output consistent and format DCTCP socket statistics similar to skmen
and timer where a group of logical values are grouped by brackets. This makes
parser scripts *and* humans more happy.

Current output of 'ss -inetm dst :80':
ESTAB       0      0 192.168.11.14:55511 173.194.66.189:443
        timer:(keepalive,14sec,0) uid:1000 ino:428768
        sk:ffff88020ceb5b00 <-> skmem:(r0,rb372480,t0,tb87040,f0,w0,o0,bl0)
        ts sack wscale:7,7 rto:250 rtt:49.225/20.837 ato:40 mss:1408 cwnd:10
        ce_state 23 alpha 23 ab_ecn 23 ab_tot 23 send 2.3Mbps
        lastsnd:121026 lastrcv:121026 lastack:30850 pacing_rate 4.6Mbps
        retrans:0/2 rcv_rtt:40.416 rcv_space:2920

New grouped output:
ESTAB       0      0 192.168.11.14:55511 173.194.66.189:443
        timer:(keepalive,14sec,0) uid:1000 ino:428768
        sk:ffff88020ceb5b00 <-> skmem:(r0,rb372480,t0,tb87040,f0,w0,o0,bl0)
        ts sack wscale:7,7 rto:250 rtt:49.225/20.837 ato:40 mss:1408 cwnd:10
        dctcp(ce_state:23,alpha:23,ab_ecn:23,ab_tot:23) send 2.3Mbps
        lastsnd:121026 lastrcv:121026 lastack:30850 pacing_rate 4.6Mbps
        retrans:0/2 rcv_rtt:40.416 rcv_space:2920

Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>

Now done by default or with 'ip monitor rule'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Detailed info can be printed if filter should not pass
the socket info.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

The existing behaviour forces one to memorize the integer constants for
STP port states.

    # bridge link set dev dummy0 state 3

This patch makes it possible to use the lowercased port state name.

    # bridge link set dev dummy0 state forwarding

Invalid non-integer inputs now cause exit with status -1.
Signed-off-by: Alex Pilon <alp@alexpilon.ca>

When this attribute is set, it means that the i/o part of the related netdevice
is in another netns.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

This new attribute is now advertised by the kernel for x-netns interfaces.
It's also possible to set it when an interface is created (and thus creating a
x-netns interface with one single message).

Example:
 $ ip netns add foo
 $ ip netns add bar
 $ ip -n foo netns set bar 15
 $ ip -n foo link add ipip1 link-netnsid 15 type ipip remote 10.16.0.121 local 10.16.0.249
 $ ip -n foo link ls ipip1
 3: ipip1@NONE: <POINTOPOINT,NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default
     link/ipip 10.16.0.249 peer 10.16.0.121 link-netnsid 15
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>