Signed-off-by: Phil Sutter <phil@nwl.cc>

Recently support was added to the kernel to be able to add more per-mdb
entry attributes via standard netlink attributes of type MDBA_MDB_EATTR_.
This patch adds support to iproute2 to parse and output these
attributes. The first exported attribute is the mdb "timer" value which
is shown only when the "-s" iproute2 arg is used.

Example:
$ bridge -s mdb show
dev br0 port eth1 grp 239.0.0.11 permanent   0.00
dev br0 port eth1 grp 239.0.0.10 temp 244.15
dev br0 port eth1 grp 239.0.0.1 temp 245.21
dev br0 port eth1 grp 239.0.0.5 temp 246.43
dev br0 port eth2 grp 239.0.0.5 temp 248.44
dev br0 port eth1 grp 239.0.0.2 temp 245.32
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

The help text was misleading: One could think it is possible to list
rules by selector, which would be nice but isn't. This change also
clarifies that 'ip rule' defaults to 'list' if no further arguments are
given.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Add IFLA_VF_TRUST message to trust the VF.
PF can accept some privileged operation from the trusted VF.
For example, ixgbe PF doesn't allow to enable VF promiscuous mode until
the VF is trusted because it may hurt performance.

To trust VF.
 # ip link set dev eth0 vf 1 trust on

To untrust VF.
 # ip link set dev eth0 vf 1 trust off
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>

invarg exits so no need to return, remove this c&p error from my recent
patches
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch is a follow up to the recently added
'static' fdb option.

It introduces a new option 'dynamic' which adds
dynamic fdb entries with NUD_REACHABLE.

$bridge fdb add 00:01:02:03:04:06 dev eth0 master dynamic

$bridge fdb show
00:01:02:03:04:06 dev eth0

This patch also documents all fdb types. Removes 'temp'
from usage message since it is now replaced by 'static'.
'temp' still works and is synonymous with static.
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

b3 buffer has been deleted previously so b2 is followed by b4
which is not consistent.
Signed-off-by: Dmitrii Shcherbakov <fw.dmitrii@yandex.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>

Remove printing according to the previously used encoding of mpu and
overhead values within the tc_ratespec's mpu field. This encoding is
no longer being used as a separate 'overhead' field in the ratespec
structure has been introduced.
Signed-off-by: Dmitrii Shcherbakov <fw.dmitrii@yandex.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>

Add support to be able to view and change IFLA_BRPORT_FAST_LEAVE
port attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Add support to be able to view and change IFLA_BRPORT_MULTICAST_ROUTER port
attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Add support to be able to view and change IFLA_BRPORT_PROXYARP_WIFI port
attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Add support to be able to view and change IFLA_BRPORT_PROXYARP port
attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Export all the read-only values that get returned about a bridge port
such as the timers, the ids, designated_port and cost,
topology_change_ack and config_pending. For the bridge ids the
br_dump_bridge_id function is exported from iplink_bridge.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Print VRF slave_info attributes if present.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>

Display new info from net-next kernel.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

netns_map_add() does a malloc of (sizeof (struct nsid_cache) +
strlen(name)) and then proceed with strcpy() of name into the
zero-length member at the end of the nsid_cache structure.  The
nul-terminator is written outside of the allocated memory and may
overwrite the allocator's internal structure.

This can trigger a segmentation fault on i386 uclibc with names of size 8:
after the corruption occurs, the call to closedir() on netns_map_init()
crashes while freeing the DIR structure.

Here is the relevant valgrind output:

==1251== Memcheck, a memory error detector
==1251== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==1251== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright
info
==1251== Command: ./ip netns
==1251==
==1251== Invalid write of size 1
==1251==    at 0x4011975: strcpy (in
/usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==1251==    by 0x8058B00: netns_map_add (ipnetns.c:181)
==1251==    by 0x8058E2A: netns_map_init (ipnetns.c:226)
==1251==    by 0x8058E79: do_netns (ipnetns.c:776)
==1251==    by 0x804D9FF: do_cmd (ip.c:110)
==1251==    by 0x804D814: main (ip.c:300)

Support for the new rx_nohandler statistic.
This code is designed to handle the case where the kernel reported statistic
structure is smaller than the larger structure in later releases (and vice versa).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

This reverts commit f9dec657.

Since this code is not in upstream kernel, it shouldn't be in iproute2

This patch adds support to add mpls multipath
routes.

example:
ip -f mpls route add 100 \
	nexthop as 200 via inet 10.1.1.2 dev swp1 \
	nexthop as 700 via inet 10.1.1.6 dev swp2
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

It seems that I've made a mistake when I exported these, instead of a
space in the end I've put a newline character which is wrong and breaks
the single line output.

Fixes: 7d6bc3b8 ("bonding: export 3ad actor and partner port state")
Reported-by: Sam Tannous <stannous@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_NF_CALL_(IP|IP6|ARP)TABLES
attributes in iproute2 so it can change their values.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_INTVL
attribute in iproute2 so it can change the startup query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
attribute in iproute2 so it can change the query response interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_QUERY_INTVL attribute
in iproute2 so it can change the query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_QUERIER_INTVL
attribute in iproute2 so it can change the querier interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_MEMBERSHIP_INTVL
attribute in iproute2 so it can change the membership interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_INTVL
attribute in iproute2 so it can change the last member interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_CNT
attribute in iproute2 so it can change the startup query count.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_CNT
attribute in iproute2 so it can change the last member count value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_HASH_MAX attribute
in iproute2 so it can change the maximum hashed entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_HASH_ELASTICTITY
attribute in iproute2 so it can change the hash elasticity value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch implements support for the IFLA_BR_MCAST_QUERIER attribute
in iproute2 so it can toggle the mcast querier value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>