Commit 0f754332 ("route: ignore RTAX_HOPLIMIT of value -1")
accidentally reordered fprintf statements. This patch restores the
original ordering.

Fixes: 0f754332 ("route: ignore RTAX_HOPLIMIT of value -1")
Signed-off-by: Phil Sutter <phil@nwl.cc>

Though dumping such entries crashes present kernels.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>

This patch:
 - Adds a utility function for parsing a 64 bit address
 - Adds a utility function for converting a 64 bit address to ASCII
 - Adds and ILA encap type in lwt tunnels
Signed-off-by: Tom Herbert <tom@herbertland.com>

The tunnel code was doing sscanf(buf, "%ld", &x) where x was unsigned
long.

Just a typo there, it's spelled correctly in SEE ALSO section..
Signed-off-by: Phil Sutter <phil@nwl.cc>

Currently, the table id for VRF devices requires an integer. Convert
it to use rtnl_rttable_a2n which handles table names from the iproute2
directory.

This also fixes a bug in the original commit where table name are not
properly handled.

Fixes: 15faa0a3 ("add support for VRF device")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>

There is two variables named 'len' in rtnl_talk. In fact, commit
c079e121 didn't work. For example, it was possible to trigger
a seg fault with this command:
$ ip link set gre2 type ip6gre hoplimit 32

Let's rename the argument len to maxlen.

Fixes: c079e121 ("libnetlink: add size argument to rtnl_talk")
Reported-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Older kernels use -1 internally as indicator to use the sysctl default,
but they still export the setting. Newer kernels use 0 to indicate that
(which is why the conversion from -1 to 0 was done here), but they also
stopped exporting the value. Since the meaning of -1 is clear, treat it
equally like default on newer kernels (which is to not print anything).
Signed-off-by: Phil Sutter <phil@nwl.cc>

Make iptunnel pass checkpatch (mostly).

On 24.11.2015 02:26, Stephen Hemminger wrote:
> On Thu, 12 Nov 2015 21:10:08 +0000
> Konstantin Shemyak <konstantin@shemyak.com> wrote:
>
>> When creating an IP tunnel over IPv6, the address family must be passed in
>> the option, e.g.
>>
>> ip -6 tunnel add mode ip6gre local 1::1 remote 2::2
>>
>> This makes it impossible to create both IPv4 and IPv6 tunnels in one batch.
>>
>> In fact the address family option is redundant here, as each tunnel mode is
>> relevant for only one address family.
>> The patch determines whether the applicable address family is AF_INET6
>> instead of the default AF_INET and makes the "-6" option unnecessary for
>> "ip tunnel add".
>>
>> Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
>> ---
>>   ip/iptunnel.c                          | 26 ++++++++++++++++++++++++++
>>   testsuite/tests/ip/tunnel/add_tunnel.t | 14 ++++++++++++++
>>   2 files changed, 40 insertions(+)
>>   create mode 100755 testsuite/tests/ip/tunnel/add_tunnel.t
>>
>> diff --git a/ip/iptunnel.c b/ip/iptunnel.c
>> index 78fa988..7826a37 100644
>> --- a/ip/iptunnel.c
>> +++ b/ip/iptunnel.c
>> @@ -629,8 +629,34 @@ static int do_6rd(int argc, char **argv)
>>          return tnl_6rd_ioctl(cmd, medium, &ip6rd);
>>   }
>>
>> +static int tunnel_mode_is_ipv6(char *tunnel_mode) {
>> +       char *ipv6_modes[] = {
>> +               "ipv6/ipv6", "ip6ip6",
>> +               "vti6",
>> +               "ip/ipv6", "ipv4/ipv6", "ipip6", "ip4ip6",
>> +               "ip6gre", "gre/ipv6",
>> +               "any/ipv6", "any"
>> +       };
>> +       int i;
>> +
>> +       for (i = 0; i < sizeof(ipv6_modes) / sizeof(char *); i++) {
>> +               if (strcmp(ipv6_modes[i], tunnel_mode) == 0)
>> +                       return 1;
>> +       }
>> +       return 0;
>> +}
>> +
>
> The ipv6_modes table should be static const.

Thank you for the note! attached the corrected patch.

> Also is it possible to use strstr for ipv6 and ip6 or even strchr(tunnel_mode, '6')
> to simplify this?

There is IPv6 tunnel mode 'any', and IPv4 tunnel mode 'ipv6/ip' (aka
'sit'). It looks to me that attempts to find some substring match
would not make the code much shorter, but definitely less readable.

Konstantin Shemyak.

>From 42d27db0055c3a114fe6eb86d680bef9ec098ad4 Mon Sep 17 00:00:00 2001
From: Konstantin Shemyak <konstantin@shemyak.com>
Date: Thu, 12 Nov 2015 20:52:02 +0200
Subject: [PATCH] Tunnel address family is determined from the tunnel mode

When the tunnel mode already tells the IP address family, "ip tunnel"
command determines it and does not require option "-4"/"-6" to be passed.

This makes possible creating both IPv4 and IPv6 tunnels in one batch.
Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>

This patch adds support to remote checksum checksum offload
to VXLAN. This patch adds remcsumtx and remcsumrx to ip vxlan
configuration to enable remote checksum offload for transmit
and receive on the VXLAN tunnel.

https://tools.ietf.org/html/draft-herbert-vxlan-rco-00

Example:

ip link add name vxlan0 type vxlan id 42 group 239.1.1.1 dev eth0 \
    udpcsum remcsumtx remcsumrx

Testing:

Ran single netperf over mlnx4 to illustrate the effest:

- Without RCO (UDP csum set to zero)
  4335.99 Mbps
- With RCO enabled
  7661.81 Mbps
Signed-off-by: Tom Herbert <tom@herbertland.com>

fgets() will read at most size-1 bytes into the buffer and add a
terminating null-char at the end. Therefore it is not necessary to pass
a reduced buffer size when calling it.

This change was generated using the following semantic patch:

@@
identifier buf, fp;
@@
- fgets(buf, sizeof(buf) - 1, fp)
+ fgets(buf, sizeof(buf), fp)
Signed-off-by: Phil Sutter <phil@nwl.cc>

Although not fundamentally necessary to check return codes in these
spots, preventing the warnings will put new ones into focus.
Signed-off-by: Phil Sutter <phil@nwl.cc>

No need to keep static port boundaries global, they are not used
directly. Keeping them local also allows to safely reduce their names to
the minimum. Assign hardcoded fallback values also if fscanf() fails.
Get rid of unnecessary braces around return parameter.

Instead of more or less duplicating is_ephemeral() in run_ssfilter(),
simply call the function instead.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Exit early or continue on error instead of putting conditional into
conditional to make reading the code a bit easier.

Also, the call to memcpy() can be skipped by initialising prog with the
desired prefix.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Instead of calling rewind() and fgets() before every call to
scan_lines(), move them into scan_lines() itself.

This should also fix compat mode, as before the second call to
scan_lines() the first line was skipped unconditionally.
Signed-off-by: Phil Sutter <phil@nwl.cc>

- Replace commas at end of subsection with dots.
- Replace double whitespace by single one.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Technically, the range of possible hoplimit values are defined by IPv4
and IPv6 header formats. Both define the field to be eight bits in size,
which leads to a value range of [0;255]. Setting a packet's hoplimit
field to 0 though makes not much sense, as the next hop would
immediately drop the packet. Therefore Linux uses 0 as a special value
indicating to use the system's default hoplimit (configurable via
sysctl). In iproute, setting the hoplimit of a route to 0 is equivalent
to omitting the hoplimit parameter alltogether, so it is actually not
necessary to allow that value to be specified, but keep it anyway for
backwards compatibility.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Since it uses only a single filter, rtnl_dump_filter() can be used.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Right after ipaddr_reset_filter(), filter.family is always AF_UNSPEC.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Linux version 3.1 introduced a consistency check for netlink dumps in
commit 670dc28 ("netlink: advertise incomplete dumps"). This bites
iproute2 when flushing more addresses than can fit into a single
RTM_GETADDR response. To silence the spurious error message "Dump was
interrupted and may be inconsistent.", advise rtnl_dump_filter_l() to
not care about NLM_F_DUMP_INTR.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Allow for a filter to ignore certain nlmsg_flags.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Since it's no longer relevant whether an IP address is primary or
secondary when flushing, ipaddr_flush() can be simplified a bit.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cleanup all checkpatch complaints about whitespace in rt_names.

Add support for reading table id/name mappings from rt_tables.d
directory.
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

I found recently that, if I disabled address promotion in the kernel, that
ip addr flush dev <dev>

would fail with an EADDRNOTAVAIL errno (though the flush operation would in fact
flush all addresses from an interface properly)

Whats happening is that, if I add a primary and multiple secondary addresses to
an interface, the flush operation first ennumerates them all with a GETADDR |
DUMP operation, then sends a delete request for each address.  But the kernel,
having promotion disabled, deletes all secondary addresses when the primary is
removed.  That means, that several delete requests may still be pending in the
netlink request for addresses that have been removed on our behalf, resulting in
EADDRNOTAVAIL return codes.

It seems the simplest thing to do is to understand that EADDRUNAVAIL isn't a
fatal outcome on a flush operation, as it just indicates that an address which
you want to remove is already removed, so it can safely be ignored.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>

Despite commit 45a82e5 ("iproute vxlan add support for fdb replace
command"), the 'fdb replace' command was not mentioned in bridge.8.
Signed-off-by: Phil Sutter <phil@nwl.cc>

The algorithm depends on the loop counter ('i') to increment by one in
each iteration. Though if running endlessly (count==0), the counter was
not incremented at all.

Also change formatting of the header printing conditional a bit so it's
hopefully easier to read.

Fixes: e7e2913f ("lnstat: run indefinitely by default")
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Post merge window changes

- Drop 'extern' keyword from all function prototypes.
- Make line breaking of print_* functions consistent.
- Make print_ntable() and ipntable_reset_filter() static and remove
  their declaration.
- Drop declaration of non-existent ipaddr_list() and iproute_monitor().
Signed-off-by: Phil Sutter <phil@nwl.cc>

Remove extraneous whitespace

Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>

Fix syntax issues and warnings highlighted by `man --warnings=w' from
man-db 2.7.1.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Since p->name is only IFNAMSIZ bytes, do not copy more than IFNAMSIZ - 1
bytes into it so there remains at least a single null byte in the end.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

Instead of parsing an unsigned integer and checking boundaries, simply
parse u8. This and the added ttl alias 'hlim' provide consistency with
ip6tunnel.
Signed-off-by: Phil Sutter <phil@nwl.cc>