and heres the SPD version ...

cheers,
jamal

[XFRM] see SPD info

i.e instead of something like ip xfrm policy ls | grep -i src | wc -l
do:

ip xfrm policy count
And you get the count; you can also pass -s or -s -s to see more
details
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

Stephen,
Use this patch instead of the one i sent yesterday.
As before, you will need to pull include/linux/xfrm.h from
net-2.6 once Dave applies the kernel patch.

cheers,
jamal

[XFRM] see SAD info

i.e instead of something like ip xfrm state ls | grep -i src | wc -l
do:

ip xfrm state count
And you get the count; you can also pass -s to the command line and
get the hash info.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

802 is 802.11 with prism headers.  803 is 802.11 with radiotap headers.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

Stephen,

Patch to support the new fib rules features I just posted
on netdev.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

Update to sanitized version of 2.6.22-rc5 headers.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

Fix initialization in libnetlink.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

Needed for cross/backwards compiles.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

This reverts fd784cca commit.

Thanks Stephen, but actually I think the last patch (increase clock
resolution) shouldn't go in yet. I'm not done yet looking at all
the compatibility issues and it does change the range of valid
values for everything dealing with times. Most places I looked
at still accept reasonable ranges, but I would feel more comfortable
to make sure everything is fine first.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

> It is in current git tree.

A small fix attached after some testing.
Please dont forget to apply my other patches. When you have them let me
know so i can do some more testing.

cheers,
jamal

[TC] Get iptables path selection to set correct path

A small tweak on top of Stephens patch
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

[IPROUTE]: Increase internal clock resolution to nsec
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

[IPROUTE]: Handle different kernel clock resolutions
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

[IPROUTE]: Add sprint_ticks() function and use in CBQ

Add helper function to print ticks to avoid assumptions about clock
resolution in CBQ.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

[IPROUTE]: Replace "usec" by "time" in function names

Rename functions containing "usec" since they don't necessarily return
usec units anymore.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

[IPROUTE]: Introduce TIME_UNITS_PER_SEC to represent internal clock resolution

Introduce TIME_UNITS_PER_SEC and conversion functions between internal
resolution and resolution expected by the kernel (currently implemented as
NOPs, only needed by HFSC, which currently always uses microseconds).
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

[IPROUTE]: Introduce tc_calc_xmitsize and use where appropriate

Add tc_calc_xmitsize() as complement to tc_calc_xmittime(), which calculates
the size that can be transmitted at a given rate during a given time.

Replace all expressions of the form "size = rate*tc_core_tick2usec(time))/1000000"
by tc_calc_xmitsize() calls.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

[IPROUTE]: Use tc_calc_xmittime() where appropriate

Replace expressions of the form "tc_core_usec2tick(1000000 * size/rate)"
by tc_calc_xmittime().

The CBQ case deserves an extra comment: when called with bnwd=rate,
tc_cbq_calc_maxidle() behaves identical to tc_calc_xmittime():

unsigned tc_cbq_calc_maxidle(...)
{
	double g = 1.0 - 1.0/(1<<ewma_log);
	double xmt = (double)avpkt/bndw;

	maxidle = xmt*(1-g);
	if (bndw != rate && maxburst) {
		...
	}
	return tc_core_usec2tick(maxidle*(1<<ewma_log)*1000000);
}

which comes down to:

maxidle	= xmt * (1 - g)
	= xmt * (1 - (1.0 - 1.0/(1 << ewma_log))
	= xmt * (1.0/(1 << ewma_log))

so:

maxidle * (1 << ewma_log) * 1000000
	= xmt * (1.0/(1 << ewma_log)) * (1 << ewma_log) * 1000000
	= xmt * 1000000
	= avpkt/bndw * 1000000

Which means tc_core_usec2tick(maxidle*(1<<ewma_log)*1000000) is identical
to tc_calc_xmittime(bndw, avpkt). Use it directly since its a lot easier
to understand its limits.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

[IPROUTE]: tbf: fix latency printing

The calculated latency is already in usecs, the additional tick2usec
conversion breaks the calculation with jiffies or tsc clock source.

Example:

# tc qdisc add dev dummy0 root tbf latency 20ms burst 10k rate 50mbit
# tc qdisc show dev dummy0
qdisc tbf 8002: rate 50000Kbit burst 10Kb lat 15.4ms

Fixed:

# tc qdisc show dev dummy0
qdisc tbf 8002: rate 50000Kbit burst 10Kb lat 20ms
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

cheers,
jamal

[GENERAL] nl_mgrp to crap if base multicast groups exceeded

The old scheme of bitmasks works only for the first 32 groups.
Above that the setsockopt scheme must be used.
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

cheers,
jamal

[ALL] update rest to use nl_mgrp
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

Update kernel headers to be versions from 2.6.20.y
Solve cross compile build problems with x_tables and netfilter.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

Hi,

  This patch enables ip command to add IFA_F_HOMEADDRESS and
  IFA_F_NODAD flags while adding the IPv6 address.

Signed-off-by: Noriaki TAKAMIYA<takamiya@po.ntts.co.jp>
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>

Add back missing man page.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

Don't hard code iptables library path. Allow use of environment variable.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

if a file fails to compile in a subdir of iproute2 fails (say "tunnel.c" in
the "ip" dir), the top level makefile does not abort:
 all: Config
    @for i in $(SUBDIRS); \
    do $(MAKE) $(MFLAGS) -C $$i; done

the attached patch inserts a 'set -e' so that if the $(MAKE) fails, the all
target fails as well
-mike

store can be used uninitialized in generic_proc_open
if getenv(env) != NULL
Signed-off-by: Thomas Hisch <t.hisch@gmail.com>

Move tc-pbfifo to tc-bfifo and make tc-pfifo a sym link
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

When using tc to change netem attributes, only those values
on the command line should be passed down, others should
remain unchanged.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

* "tc [class|qdisc|filter] get" doesn't exist, remove it from inline help.

* Add "replace" to "tc [class|filter] get" inline help.

* Fix "tc [class|qdisc|filter] help" output:

  ~$ tc class help
  [snip]
  Command "help" is unknown, try "tc class help".
  ~$

with my best wishes,

--
Hasso Tepper
Elion Enterprises Ltd. [AS3249]
Data Communication Network Administrator
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

Stephen,
I will wait until you sync all these patches ive sent; then send a
couple more then i will be done.

cheers,
jamal

[XFRM] update xfrm monitoring to use nl_mgrp
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

[utils] make muticast group to bitmask conversion generic
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

[XFRM] update xfrm async events

Report abbreviated async xfrm aevents.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

[README] Mention need for db dev package
This has always been an annoyance for me whenever i moved to a new
machine. Just mention it in the readme hoping it will save someone
some cycles
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

[U32] Fix missing class/flowid oddity
When an action or policer is specified but not a classid/flowid, the
syntax accepts it but the kernel never really hits it.
This has been a long standing problem, but thanks to the persistence
of Marco Berizzi <pupilla@hotmail.com> I broke down and fixed it.
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

Needs kernel >= 2.6.19.
Signed-off-by: Patrick McHardy <kaber@trash.net>

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

a small one.
I have a few more but just run out of cycles for now;
if you dont mind holding before releasing for a short while so i can
get them out I will appreciate it.

cheers,
jamal

[DOC]: clarify "ok" and "pass"

A small fixup to elucidate the mysteries of accepting ..
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

Ok, heres hopefully the last one in this series for generic netlink ..

cheers,
jamal

[GENL]: Add controller support for new features exposed

Update the controller to spit out the new features being exposed
from the kernel
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>