Skip to content

L
linux
Commit 0097a69d authored by Alan Cox's avatar Alan Cox Committed by Greg Kroah-Hartman
Browse files
Options

Staging: sep: merge the two files 

Now we have it trimmed down a bit merge the two pieces so we can clean it up
properly. Code moves but no changes in functions.
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 84072482
Show whitespace changes
Inline Side-by-side
Showing with 404 additions and 469 deletions
drivers/staging/sep/Makefile
View file @ 0097a69d
EXTRA_CFLAGS += -DLITTLE__ENDIAN -DDX_CC5_SEP_PLAT -DCRYS_NO_EXT_IF_MODE_SUPPORT EXTRA_CFLAGS += -DLITTLE__ENDIAN -DDX_CC5_SEP_PLAT -DCRYS_NO_EXT_IF_MODE_SUPPORT
obj-$(CONFIG_DX_SEP) := sep_driver.o obj-$(CONFIG_DX_SEP) := sep_driver.o
sep_driver-objs := sep_main_mod.o sep_ext_with_pci_driver.o
drivers/staging/sep/sep_main_mod.c → drivers/staging/sep/sep_driver.c
View file @ 0097a69d
...@@ -38,6 +38,8 @@ ...@@ -38,6 +38,8 @@
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/poll.h> #include <linux/poll.h>
#include <linux/wait.h> #include <linux/wait.h>
#include <linux/pci.h>
#include <linux/firmware.h>
#include <asm/ioctl.h> #include <asm/ioctl.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <asm/io.h> #include <asm/io.h>
...@@ -50,18 +52,115 @@ ...@@ -50,18 +52,115 @@
#include "sep_driver_ext_api.h" #include "sep_driver_ext_api.h"
#include "sep_dev.h" #include "sep_dev.h"
/*---------------------------------------- #if SEP_DRIVER_ARM_DEBUG_MODE
DEFINES
-----------------------------------------*/
#define CRYS_SEP_ROM_length 0x4000
#define CRYS_SEP_ROM_start_address 0x8000C000UL
#define CRYS_SEP_ROM_start_address_offset 0xC000UL
#define SEP_ROM_BANK_register 0x80008420UL
#define SEP_ROM_BANK_register_offset 0x8420UL
#define SEP_RAR_IO_MEM_REGION_START_ADDRESS 0x82000000
#define INT_MODULE_PARM(n, v) int n = v; module_param(n, int, 0) /*
* THESE 2 definitions are specific to the board - must be
* defined during integration
*/
#define SEP_RAR_IO_MEM_REGION_START_ADDRESS 0xFF0D0000
/* 2M size */
void sep_load_rom_code(void)
{
/* Index variables */
unsigned long i, k, j;
unsigned long regVal;
unsigned long Error;
unsigned long warning;
/* Loading ROM from SEP_ROM_image.h file */
k = sizeof(CRYS_SEP_ROM);
edbg("SEP Driver: DX_CC_TST_SepRomLoader start\n");
edbg("SEP Driver: k is %lu\n", k);
edbg("SEP Driver: sep_dev->reg_base_address is %p\n", sep_dev->reg_base_address);
edbg("SEP Driver: CRYS_SEP_ROM_start_address_offset is %p\n", CRYS_SEP_ROM_start_address_offset);
/*-------------------------------------- for (i = 0; i < 4; i++) {
TYPEDEFS /* write bank */
-----------------------------------------*/ sep_write_reg(sep_dev, SEP_ROM_BANK_register_offset, i);
for (j = 0; j < CRYS_SEP_ROM_length / 4; j++) {
sep_write_reg(sep_dev, CRYS_SEP_ROM_start_address_offset + 4 * j, CRYS_SEP_ROM[i * 0x1000 + j]);
k = k - 4;
if (k == 0) {
j = CRYS_SEP_ROM_length;
i = 4;
}
}
}
/* reset the SEP */
sep_write_reg(sep_dev, HW_HOST_SEP_SW_RST_REG_ADDR, 0x1);
/* poll for SEP ROM boot finish */
do {
retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
} while (!regVal);
edbg("SEP Driver: ROM polling ended\n");
switch (regVal) {
case 0x1:
/* fatal error - read erro status from GPRO */
Error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 1\n");
break;
case 0x2:
/* Boot First Phase ended */
warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 2\n");
break;
case 0x4:
/* Cold boot ended successfully */
warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 4\n");
Error = 0;
break;
case 0x8:
/* Warmboot ended successfully */
warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 8\n");
Error = 0;
break;
case 0x10:
/* ColdWarm boot ended successfully */
warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 16\n");
Error = 0;
break;
case 0x20:
edbg("SEP Driver: ROM polling case 32\n");
break;
}
}
#else
void sep_load_rom_code(void) { }
#endif /* SEP_DRIVER_ARM_DEBUG_MODE */
/*----------------------------------------
DEFINES
-----------------------------------------*/
#define INT_MODULE_PARM(n, v) int n = v; module_param(n, int, 0)
#define BASE_ADDRESS_FOR_SYSTEM 0xfffc0000
#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000
/*-------------------------------------------- /*--------------------------------------------
GLOBAL variables GLOBAL variables
...@@ -71,6 +170,14 @@ ...@@ -71,6 +170,14 @@
INT_MODULE_PARM(sepDebug, 0x0); INT_MODULE_PARM(sepDebug, 0x0);
MODULE_PARM_DESC(sepDebug, "Flag to enable SEP debug messages"); MODULE_PARM_DESC(sepDebug, "Flag to enable SEP debug messages");
/* Keep this a single static object for now to keep the conversion easy */
static struct sep_device sep_instance;
struct sep_device *sep_dev = &sep_instance;
/* temporary */
unsigned long jiffies_future;
/* /*
mutex for the access to the internals of the sep driver mutex for the access to the internals of the sep driver
...@@ -287,6 +394,171 @@ static int sep_lock_user_pages(unsigned long app_virt_addr, unsigned long data_s ...@@ -287,6 +394,171 @@ static int sep_lock_user_pages(unsigned long app_virt_addr, unsigned long data_s
FUNCTIONS FUNCTIONS
-----------------------------------------------*/ -----------------------------------------------*/
/*
This functions locks the area of the resisnd and cache sep code
*/
void sep_lock_cache_resident_area(void)
{
return;
}
/*
This functions copies the cache and resident from their source location into
destination memory, which is external to Linux VM and is given as
physical address
*/
int sep_copy_cache_resident_to_area(unsigned long src_cache_addr, unsigned long cache_size_in_bytes, unsigned long src_resident_addr, unsigned long resident_size_in_bytes, unsigned long *dst_new_cache_addr_ptr, unsigned long *dst_new_resident_addr_ptr)
{
unsigned long resident_addr;
unsigned long cache_addr;
const struct firmware *fw;
char *cache_name = "cache.image.bin";
char *res_name = "resident.image.bin";
/* error */
int error;
/*--------------------------------
CODE
-------------------------------------*/
error = 0;
edbg("SEP Driver:rar_virtual is %p\n", sep_dev->rar_virtual_address);
edbg("SEP Driver:rar_physical is %08lx\n", sep_dev->rar_physical_address);
sep_dev->rar_region_addr = (unsigned long) sep_dev->rar_virtual_address;
sep_dev->cache_physical_address = sep_dev->rar_physical_address;
sep_dev->cache_virtual_address = sep_dev->rar_virtual_address;
/* load cache */
error = request_firmware(&fw, cache_name, &sep_dev->sep_pci_dev_ptr->dev);
if (error) {
edbg("SEP Driver:cant request cache fw\n");
goto end_function;
}
edbg("SEP Driver:cache data loc is %p\n", (void *) fw->data);
edbg("SEP Driver:cache data size is %08Zx\n", fw->size);
memcpy((void *) sep_dev->cache_virtual_address, (void *) fw->data, fw->size);
sep_dev->cache_size = fw->size;
cache_addr = (unsigned long) sep_dev->cache_virtual_address;
release_firmware(fw);
sep_dev->resident_physical_address = sep_dev->cache_physical_address + sep_dev->cache_size;
sep_dev->resident_virtual_address = sep_dev->cache_virtual_address + sep_dev->cache_size;
/* load resident */
error = request_firmware(&fw, res_name, &sep_dev->sep_pci_dev_ptr->dev);
if (error) {
edbg("SEP Driver:cant request res fw\n");
goto end_function;
}
edbg("SEP Driver:res data loc is %p\n", (void *) fw->data);
edbg("SEP Driver:res data size is %08Zx\n", fw->size);
memcpy((void *) sep_dev->resident_virtual_address, (void *) fw->data, fw->size);
sep_dev->resident_size = fw->size;
release_firmware(fw);
resident_addr = (unsigned long) sep_dev->resident_virtual_address;
edbg("SEP Driver:resident_addr (physical )is %08lx\n", sep_dev->resident_physical_address);
edbg("SEP Driver:cache_addr (physical) is %08lx\n", sep_dev->cache_physical_address);
edbg("SEP Driver:resident_addr (logical )is %08lx\n", resident_addr);
edbg("SEP Driver:cache_addr (logical) is %08lx\n", cache_addr);
edbg("SEP Driver:resident_size is %08lx\n", sep_dev->resident_size);
edbg("SEP Driver:cache_size is %08lx\n", sep_dev->cache_size);
/* physical addresses */
*dst_new_cache_addr_ptr = sep_dev->cache_physical_address;
*dst_new_resident_addr_ptr = sep_dev->resident_physical_address;
end_function:
return error;
}
/*
This functions maps and allocates the
shared area on the external RAM (device)
The input is shared_area_size - the size of the memory to
allocate. The outputs
are kernel_shared_area_addr_ptr - the kerenl
address of the mapped and allocated
shared area, and phys_shared_area_addr_ptr
- the physical address of the shared area
*/
int sep_map_and_alloc_shared_area(unsigned long shared_area_size, unsigned long *kernel_shared_area_addr_ptr, unsigned long *phys_shared_area_addr_ptr)
{
// shared_virtual_address = ioremap_nocache(0xda00000,shared_area_size);
sep_dev->shared_virtual_address = kmalloc(shared_area_size, GFP_KERNEL);
if (!sep_dev->shared_virtual_address) {
edbg("sep_driver:shared memory kmalloc failed\n");
return -1;
}
/* FIXME */
sep_dev->shared_physical_address = __pa(sep_dev->shared_virtual_address);
/* shared_physical_address = 0xda00000; */
*kernel_shared_area_addr_ptr = (unsigned long) sep_dev->shared_virtual_address;
/* set the physical address of the shared area */
*phys_shared_area_addr_ptr = sep_dev->shared_physical_address;
edbg("SEP Driver:shared_virtual_address is %p\n", sep_dev->shared_virtual_address);
edbg("SEP Driver:shared_region_size is %08lx\n", shared_area_size);
edbg("SEP Driver:shared_physical_addr is %08lx\n", *phys_shared_area_addr_ptr);
return 0;
}
/*
This functions unmaps and deallocates the shared area
on the external RAM (device)
The input is shared_area_size - the size of the memory to deallocate,kernel_
shared_area_addr_ptr - the kernel address of the mapped and allocated
shared area,phys_shared_area_addr_ptr - the physical address of
the shared area
*/
void sep_unmap_and_free_shared_area(unsigned long shared_area_size, unsigned long kernel_shared_area_addr, unsigned long phys_shared_area_addr)
{
kfree((void *) kernel_shared_area_addr);
}
/*
This functions returns the physical address inside shared area according
to the virtual address. It can be either on the externa RAM device
(ioremapped), or on the system RAM
This implementation is for the external RAM
*/
unsigned long sep_shared_area_virt_to_phys(unsigned long virt_address)
{
edbg("SEP Driver:sh virt to phys v %08lx\n", virt_address);
edbg("SEP Driver:sh virt to phys p %08lx\n", sep_dev->shared_physical_address + (virt_address - (unsigned long) sep_dev->shared_virtual_address));
return (unsigned long) sep_dev->shared_physical_address + (virt_address - (unsigned long) sep_dev->shared_virtual_address);
}
/*
This functions returns the virtual address inside shared area
according to the physical address. It can be either on the
externa RAM device (ioremapped), or on the system RAM This implementation
is for the external RAM
*/
unsigned long sep_shared_area_phys_to_virt(unsigned long phys_address)
{
return (unsigned long) sep_dev->shared_virtual_address + (phys_address - sep_dev->shared_physical_address);
}
/* /*
this function returns the address of the message shared area this function returns the address of the message shared area
*/ */
...@@ -1860,7 +2132,6 @@ static int sep_start_handler(void) ...@@ -1860,7 +2132,6 @@ static int sep_start_handler(void)
if (reg_val == 0x1) if (reg_val == 0x1)
/* fatal error - read erro status from GPRO */ /* fatal error - read erro status from GPRO */
error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR); error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
end_function:
dbg("SEP Driver:<-------- sep_start_handler end\n"); dbg("SEP Driver:<-------- sep_start_handler end\n");
return error; return error;
} }
...@@ -2430,6 +2701,130 @@ static void sep_configure_dma_burst(void) ...@@ -2430,6 +2701,130 @@ static void sep_configure_dma_burst(void)
} }
/*
function that is activaed on the succesfull probe of the SEP device
*/
static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int error = 0;
edbg("Sep pci probe starting\n");
/* enable the device */
error = pci_enable_device(pdev);
if (error) {
edbg("error enabling pci device\n");
goto end_function;
}
/* set the pci dev pointer */
sep_dev->sep_pci_dev_ptr = pdev;
/* get the io memory start address */
sep_dev->io_memory_start_physical_address = pci_resource_start(pdev, 0);
if (!sep_dev->io_memory_start_physical_address) {
edbg("SEP Driver error pci resource start\n");
goto end_function;
}
/* get the io memory end address */
sep_dev->io_memory_end_physical_address = pci_resource_end(pdev, 0);
if (!sep_dev->io_memory_end_physical_address) {
edbg("SEP Driver error pci resource end\n");
goto end_function;
}
sep_dev->io_memory_size = sep_dev->io_memory_end_physical_address - sep_dev->io_memory_start_physical_address + 1;
edbg("SEP Driver:io_memory_start_physical_address is %08lx\n", sep_dev->io_memory_start_physical_address);
edbg("SEP Driver:io_memory_end_phyaical_address is %08lx\n", sep_dev->io_memory_end_physical_address);
edbg("SEP Driver:io_memory_size is %08lx\n", sep_dev->io_memory_size);
sep_dev->io_memory_start_virtual_address = ioremap_nocache(sep_dev->io_memory_start_physical_address, sep_dev->io_memory_size);
if (!sep_dev->io_memory_start_virtual_address) {
edbg("SEP Driver error ioremap of io memory\n");
goto end_function;
}
edbg("SEP Driver:io_memory_start_virtual_address is %p\n", sep_dev->io_memory_start_virtual_address);
sep_dev->reg_base_address = (void __iomem *) sep_dev->io_memory_start_virtual_address;
/* set up system base address and shared memory location */
sep_dev->rar_virtual_address = kmalloc(2 * SEP_RAR_IO_MEM_REGION_SIZE, GFP_KERNEL);
if (!sep_dev->rar_virtual_address) {
edbg("SEP Driver:cant kmalloc rar\n");
goto end_function;
}
/* FIXME */
sep_dev->rar_physical_address = __pa(sep_dev->rar_virtual_address);
edbg("SEP Driver:rar_physical is %08lx\n", sep_dev->rar_physical_address);
edbg("SEP Driver:rar_virtual is %p\n", sep_dev->rar_virtual_address);
#if !SEP_DRIVER_POLLING_MODE
edbg("SEP Driver: about to write IMR and ICR REG_ADDR\n");
/* clear ICR register */
sep_write_reg(sep_dev, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF);
/* set the IMR register - open only GPR 2 */
sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
/* figure out our irq */
/* FIXME: */
error = pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, (u8 *) & sep_dev->sep_irq);
edbg("SEP Driver: my irq is %d\n", sep_irq);
edbg("SEP Driver: about to call request_irq\n");
/* get the interrupt line */
error = request_irq(sep_irq, sep_inthandler, IRQF_SHARED, "sep_driver", &sep_dev->reg_base_address);
if (error)
goto end_function;
goto end_function;
edbg("SEP Driver: about to write IMR REG_ADDR");
/* set the IMR register - open only GPR 2 */
sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
#endif /* SEP_DRIVER_POLLING_MODE */
end_function:
return error;
}
static struct pci_device_id sep_pci_id_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080c)},
{0}
};
MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl);
/* field for registering driver to PCI device */
static struct pci_driver sep_pci_driver = {
.name = "sep_sec_driver",
.id_table = sep_pci_id_tbl,
.probe = sep_probe
};
/*
this function registers th driver to
the device subsystem( either PCI, USB, etc)
*/
int sep_register_driver_to_device(void)
{
return pci_register_driver(&sep_pci_driver);
}
/* major and minor device numbers */ /* major and minor device numbers */
static dev_t sep_devno; static dev_t sep_devno;
......
drivers/staging/sep/sep_ext_with_pci_driver.c deleted 100644 → 0
View file @ 84072482
/*
*
* sep_ext_with_pci_driver.c - Security Processor Driver
* pci initialization functions
*
* Copyright(c) 2009 Intel Corporation. All rights reserved.
* Copyright(c) 2009 Discretix. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* CONTACTS:
*
* Mark Allyn mark.a.allyn@intel.com
*
* CHANGES:
*
* 2009.06.26 Initial publish
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/cdev.h>
#include <linux/kdev_t.h>
#include <linux/semaphore.h>
#include <linux/mm.h>
#include <linux/poll.h>
#include <linux/wait.h>
#include <linux/ioctl.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/pagemap.h>
#include <linux/pci.h>
#include <linux/firmware.h>
#include <linux/sched.h>
#include "sep_driver_hw_defs.h"
#include "sep_driver_config.h"
#include "sep_driver_api.h"
#include "sep_driver_ext_api.h"
#include "sep_dev.h"
#if SEP_DRIVER_ARM_DEBUG_MODE
#define CRYS_SEP_ROM_length 0x4000
#define CRYS_SEP_ROM_start_address 0x8000C000UL
#define CRYS_SEP_ROM_start_address_offset 0xC000UL
#define SEP_ROM_BANK_register 0x80008420UL
#define SEP_ROM_BANK_register_offset 0x8420UL
#define SEP_RAR_IO_MEM_REGION_START_ADDRESS 0x82000000
/*
* THESE 2 definitions are specific to the board - must be
* defined during integration
*/
#define SEP_RAR_IO_MEM_REGION_START_ADDRESS 0xFF0D0000
/* 2M size */
void sep_load_rom_code(void)
{
/* Index variables */
unsigned long i, k, j;
unsigned long regVal;
unsigned long Error;
unsigned long warning;
/* Loading ROM from SEP_ROM_image.h file */
k = sizeof(CRYS_SEP_ROM);
edbg("SEP Driver: DX_CC_TST_SepRomLoader start\n");
edbg("SEP Driver: k is %lu\n", k);
edbg("SEP Driver: sep_dev->reg_base_address is %p\n", sep_dev->reg_base_address);
edbg("SEP Driver: CRYS_SEP_ROM_start_address_offset is %p\n", CRYS_SEP_ROM_start_address_offset);
for (i = 0; i < 4; i++) {
/* write bank */
sep_write_reg(sep_dev, SEP_ROM_BANK_register_offset, i);
for (j = 0; j < CRYS_SEP_ROM_length / 4; j++) {
sep_write_reg(sep_dev, CRYS_SEP_ROM_start_address_offset + 4 * j, CRYS_SEP_ROM[i * 0x1000 + j]);
k = k - 4;
if (k == 0) {
j = CRYS_SEP_ROM_length;
i = 4;
}
}
}
/* reset the SEP */
sep_write_reg(sep_dev, HW_HOST_SEP_SW_RST_REG_ADDR, 0x1);
/* poll for SEP ROM boot finish */
do {
retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
} while (!regVal);
edbg("SEP Driver: ROM polling ended\n");
switch (regVal) {
case 0x1:
/* fatal error - read erro status from GPRO */
Error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 1\n");
break;
case 0x2:
/* Boot First Phase ended */
warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 2\n");
break;
case 0x4:
/* Cold boot ended successfully */
warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 4\n");
Error = 0;
break;
case 0x8:
/* Warmboot ended successfully */
warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 8\n");
Error = 0;
break;
case 0x10:
/* ColdWarm boot ended successfully */
warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
edbg("SEP Driver: ROM polling case 16\n");
Error = 0;
break;
case 0x20:
edbg("SEP Driver: ROM polling case 32\n");
break;
}
}
#else
void sep_load_rom_code(void) { }
#endif /* SEP_DRIVER_ARM_DEBUG_MODE */
#define BASE_ADDRESS_FOR_SYSTEM 0xfffc0000
#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000
irqreturn_t sep_inthandler(int irq, void *dev_id);
/* Keep this a single static object for now to keep the conversion easy */
static struct sep_device sep_instance;
struct sep_device *sep_dev = &sep_instance;
/* temporary */
unsigned long jiffies_future;
/*-----------------------------
private functions
--------------------------------*/
/*
This functions locks the area of the resisnd and cache sep code
*/
void sep_lock_cache_resident_area(void)
{
return;
}
/*
This functions copies the cache and resident from their source location into
destination memory, which is external to Linux VM and is given as
physical address
*/
int sep_copy_cache_resident_to_area(unsigned long src_cache_addr, unsigned long cache_size_in_bytes, unsigned long src_resident_addr, unsigned long resident_size_in_bytes, unsigned long *dst_new_cache_addr_ptr, unsigned long *dst_new_resident_addr_ptr)
{
unsigned long resident_addr;
unsigned long cache_addr;
const struct firmware *fw;
char *cache_name = "cache.image.bin";
char *res_name = "resident.image.bin";
/* error */
int error;
/*--------------------------------
CODE
-------------------------------------*/
error = 0;
edbg("SEP Driver:rar_virtual is %p\n", sep_dev->rar_virtual_address);
edbg("SEP Driver:rar_physical is %08lx\n", sep_dev->rar_physical_address);
sep_dev->rar_region_addr = (unsigned long) sep_dev->rar_virtual_address;
sep_dev->cache_physical_address = sep_dev->rar_physical_address;
sep_dev->cache_virtual_address = sep_dev->rar_virtual_address;
/* load cache */
error = request_firmware(&fw, cache_name, &sep_dev->sep_pci_dev_ptr->dev);
if (error) {
edbg("SEP Driver:cant request cache fw\n");
goto end_function;
}
edbg("SEP Driver:cache data loc is %p\n", (void *) fw->data);
edbg("SEP Driver:cache data size is %08Zx\n", fw->size);
memcpy((void *) sep_dev->cache_virtual_address, (void *) fw->data, fw->size);
sep_dev->cache_size = fw->size;
cache_addr = (unsigned long) sep_dev->cache_virtual_address;
release_firmware(fw);
sep_dev->resident_physical_address = sep_dev->cache_physical_address + sep_dev->cache_size;
sep_dev->resident_virtual_address = sep_dev->cache_virtual_address + sep_dev->cache_size;
/* load resident */
error = request_firmware(&fw, res_name, &sep_dev->sep_pci_dev_ptr->dev);
if (error) {
edbg("SEP Driver:cant request res fw\n");
goto end_function;
}
edbg("SEP Driver:res data loc is %p\n", (void *) fw->data);
edbg("SEP Driver:res data size is %08Zx\n", fw->size);
memcpy((void *) sep_dev->resident_virtual_address, (void *) fw->data, fw->size);
sep_dev->resident_size = fw->size;
release_firmware(fw);
resident_addr = (unsigned long) sep_dev->resident_virtual_address;
edbg("SEP Driver:resident_addr (physical )is %08lx\n", sep_dev->resident_physical_address);
edbg("SEP Driver:cache_addr (physical) is %08lx\n", sep_dev->cache_physical_address);
edbg("SEP Driver:resident_addr (logical )is %08lx\n", resident_addr);
edbg("SEP Driver:cache_addr (logical) is %08lx\n", cache_addr);
edbg("SEP Driver:resident_size is %08lx\n", sep_dev->resident_size);
edbg("SEP Driver:cache_size is %08lx\n", sep_dev->cache_size);
/* physical addresses */
*dst_new_cache_addr_ptr = sep_dev->cache_physical_address;
*dst_new_resident_addr_ptr = sep_dev->resident_physical_address;
end_function:
return error;
}
/*
This functions maps and allocates the
shared area on the external RAM (device)
The input is shared_area_size - the size of the memory to
allocate. The outputs
are kernel_shared_area_addr_ptr - the kerenl
address of the mapped and allocated
shared area, and phys_shared_area_addr_ptr
- the physical address of the shared area
*/
int sep_map_and_alloc_shared_area(unsigned long shared_area_size, unsigned long *kernel_shared_area_addr_ptr, unsigned long *phys_shared_area_addr_ptr)
{
// shared_virtual_address = ioremap_nocache(0xda00000,shared_area_size);
sep_dev->shared_virtual_address = kmalloc(shared_area_size, GFP_KERNEL);
if (!sep_dev->shared_virtual_address) {
edbg("sep_driver:shared memory kmalloc failed\n");
return -1;
}
/* FIXME */
sep_dev->shared_physical_address = __pa(sep_dev->shared_virtual_address);
/* shared_physical_address = 0xda00000; */
*kernel_shared_area_addr_ptr = (unsigned long) sep_dev->shared_virtual_address;
/* set the physical address of the shared area */
*phys_shared_area_addr_ptr = sep_dev->shared_physical_address;
edbg("SEP Driver:shared_virtual_address is %p\n", sep_dev->shared_virtual_address);
edbg("SEP Driver:shared_region_size is %08lx\n", shared_area_size);
edbg("SEP Driver:shared_physical_addr is %08lx\n", *phys_shared_area_addr_ptr);
return 0;
}
/*
This functions unmaps and deallocates the shared area
on the external RAM (device)
The input is shared_area_size - the size of the memory to deallocate,kernel_
shared_area_addr_ptr - the kernel address of the mapped and allocated
shared area,phys_shared_area_addr_ptr - the physical address of
the shared area
*/
void sep_unmap_and_free_shared_area(unsigned long shared_area_size, unsigned long kernel_shared_area_addr, unsigned long phys_shared_area_addr)
{
kfree((void *) kernel_shared_area_addr);
}
/*
This functions returns the physical address inside shared area according
to the virtual address. It can be either on the externa RAM device
(ioremapped), or on the system RAM
This implementation is for the external RAM
*/
unsigned long sep_shared_area_virt_to_phys(unsigned long virt_address)
{
edbg("SEP Driver:sh virt to phys v %08lx\n", virt_address);
edbg("SEP Driver:sh virt to phys p %08lx\n", sep_dev->shared_physical_address + (virt_address - (unsigned long) sep_dev->shared_virtual_address));
return (unsigned long) sep_dev->shared_physical_address + (virt_address - (unsigned long) sep_dev->shared_virtual_address);
}
/*
This functions returns the virtual address inside shared area
according to the physical address. It can be either on the
externa RAM device (ioremapped), or on the system RAM This implementation
is for the external RAM
*/
unsigned long sep_shared_area_phys_to_virt(unsigned long phys_address)
{
return (unsigned long) sep_dev->shared_virtual_address + (phys_address - sep_dev->shared_physical_address);
}
/*
function that is activaed on the succesfull probe of the SEP device
*/
static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int error = 0;
edbg("Sep pci probe starting\n");
/* enable the device */
error = pci_enable_device(pdev);
if (error) {
edbg("error enabling pci device\n");
goto end_function;
}
/* set the pci dev pointer */
sep_dev->sep_pci_dev_ptr = pdev;
/* get the io memory start address */
sep_dev->io_memory_start_physical_address = pci_resource_start(pdev, 0);
if (!sep_dev->io_memory_start_physical_address) {
edbg("SEP Driver error pci resource start\n");
goto end_function;
}
/* get the io memory end address */
sep_dev->io_memory_end_physical_address = pci_resource_end(pdev, 0);
if (!sep_dev->io_memory_end_physical_address) {
edbg("SEP Driver error pci resource end\n");
goto end_function;
}
sep_dev->io_memory_size = sep_dev->io_memory_end_physical_address - sep_dev->io_memory_start_physical_address + 1;
edbg("SEP Driver:io_memory_start_physical_address is %08lx\n", sep_dev->io_memory_start_physical_address);
edbg("SEP Driver:io_memory_end_phyaical_address is %08lx\n", sep_dev->io_memory_end_physical_address);
edbg("SEP Driver:io_memory_size is %08lx\n", sep_dev->io_memory_size);
sep_dev->io_memory_start_virtual_address = ioremap_nocache(sep_dev->io_memory_start_physical_address, sep_dev->io_memory_size);
if (!sep_dev->io_memory_start_virtual_address) {
edbg("SEP Driver error ioremap of io memory\n");
goto end_function;
}
edbg("SEP Driver:io_memory_start_virtual_address is %p\n", sep_dev->io_memory_start_virtual_address);
sep_dev->reg_base_address = (void __iomem *) sep_dev->io_memory_start_virtual_address;
/* set up system base address and shared memory location */
sep_dev->rar_virtual_address = kmalloc(2 * SEP_RAR_IO_MEM_REGION_SIZE, GFP_KERNEL);
if (!sep_dev->rar_virtual_address) {
edbg("SEP Driver:cant kmalloc rar\n");
goto end_function;
}
/* FIXME */
sep_dev->rar_physical_address = __pa(sep_dev->rar_virtual_address);
edbg("SEP Driver:rar_physical is %08lx\n", sep_dev->rar_physical_address);
edbg("SEP Driver:rar_virtual is %p\n", sep_dev->rar_virtual_address);
#if !SEP_DRIVER_POLLING_MODE
edbg("SEP Driver: about to write IMR and ICR REG_ADDR\n");
/* clear ICR register */
sep_write_reg(sep_dev, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF);
/* set the IMR register - open only GPR 2 */
sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
/* figure out our irq */
/* FIXME: */
error = pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, (u8 *) & sep_dev->sep_irq);
edbg("SEP Driver: my irq is %d\n", sep_irq);
edbg("SEP Driver: about to call request_irq\n");
/* get the interrupt line */
error = request_irq(sep_irq, sep_inthandler, IRQF_SHARED, "sep_driver", &sep_dev->reg_base_address);
if (error)
goto end_function;
goto end_function;
edbg("SEP Driver: about to write IMR REG_ADDR");
/* set the IMR register - open only GPR 2 */
sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
#endif /* SEP_DRIVER_POLLING_MODE */
end_function:
return error;
}
static struct pci_device_id sep_pci_id_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080c)},
{0}
};
MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl);
/* field for registering driver to PCI device */
static struct pci_driver sep_pci_driver = {
.name = "sep_sec_driver",
.id_table = sep_pci_id_tbl,
.probe = sep_probe
};
/*
this function registers th driver to
the device subsystem( either PCI, USB, etc)
*/
int sep_register_driver_to_device(void)
{
return pci_register_driver(&sep_pci_driver);
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7