Commit 00afdbbf authored by Vivi Li's avatar Vivi Li Committed by Bob Liu

bf60x: vs6624 pin update

Change ce pin to PE4 according to new adaptor board and re-define ppi for vs6624
to avoid gpio conflict.
Signed-off-by: default avatarVivi Li <vivi.li@analog.com>
Signed-off-by: default avatarBob Liu <lliubbo@gmail.com>
parent 507e20b3
...@@ -830,8 +830,10 @@ static const unsigned short ppi_req[] = { ...@@ -830,8 +830,10 @@ static const unsigned short ppi_req[] = {
P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE)
P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19, P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
#endif
P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
0, 0,
}; };
...@@ -862,7 +864,7 @@ static struct bcap_route vs6624_routes[] = { ...@@ -862,7 +864,7 @@ static struct bcap_route vs6624_routes[] = {
}, },
}; };
static const unsigned vs6624_ce_pin = GPIO_PD1; static const unsigned vs6624_ce_pin = GPIO_PE4;
static struct bfin_capture_config bfin_capture_data = { static struct bfin_capture_config bfin_capture_data = {
.card_name = "BF609", .card_name = "BF609",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment