Commit 00b96c0e authored by Frederic Barrat's avatar Frederic Barrat Committed by Michael Ellerman

ocxl: Documentation

ocxl.rst gives a quick, high-level view of opencapi.

Update ioctl-number.txt to reflect ioctl numbers being used by the
ocxl driver
Signed-off-by: default avatarFrederic Barrat <fbarrat@linux.vnet.ibm.com>
[mpe: Fix up mixed whitespace as spotted by gregkh]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 741ddae6
What: /sys/class/ocxl/<afu name>/afu_version
Date: January 2018
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Version of the AFU, in the format <major>:<minor>
Reflects what is read in the configuration space of the AFU
What: /sys/class/ocxl/<afu name>/contexts
Date: January 2018
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Number of contexts for the AFU, in the format <n>/<max>
where:
n: number of currently active contexts, for debug
max: maximum number of contexts supported by the AFU
What: /sys/class/ocxl/<afu name>/pp_mmio_size
Date: January 2018
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Size of the per-process mmio area, as defined in the
configuration space of the AFU
What: /sys/class/ocxl/<afu name>/global_mmio_size
Date: January 2018
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Size of the global mmio area, as defined in the
configuration space of the AFU
What: /sys/class/ocxl/<afu name>/global_mmio_area
Date: January 2018
Contact: linuxppc-dev@lists.ozlabs.org
Description: read/write
Give access the global mmio area for the AFU
========================================================
OpenCAPI (Open Coherent Accelerator Processor Interface)
========================================================
OpenCAPI is an interface between processors and accelerators. It aims
at being low-latency and high-bandwidth. The specification is
developed by the `OpenCAPI Consortium <http://opencapi.org/>`_.
It allows an accelerator (which could be a FPGA, ASICs, ...) to access
the host memory coherently, using virtual addresses. An OpenCAPI
device can also host its own memory, that can be accessed from the
host.
OpenCAPI is known in linux as 'ocxl', as the open, processor-agnostic
evolution of 'cxl' (the driver for the IBM CAPI interface for
powerpc), which was named that way to avoid confusion with the ISDN
CAPI subsystem.
High-level view
===============
OpenCAPI defines a Data Link Layer (DL) and Transaction Layer (TL), to
be implemented on top of a physical link. Any processor or device
implementing the DL and TL can start sharing memory.
::
+-----------+ +-------------+
| | | |
| | | Accelerated |
| Processor | | Function |
| | +--------+ | Unit | +--------+
| |--| Memory | | (AFU) |--| Memory |
| | +--------+ | | +--------+
+-----------+ +-------------+
| |
+-----------+ +-------------+
| TL | | TLX |
+-----------+ +-------------+
| |
+-----------+ +-------------+
| DL | | DLX |
+-----------+ +-------------+
| |
| PHY |
+---------------------------------------+
Device discovery
================
OpenCAPI relies on a PCI-like configuration space, implemented on the
device. So the host can discover AFUs by querying the config space.
OpenCAPI devices in Linux are treated like PCI devices (with a few
caveats). The firmware is expected to abstract the hardware as if it
was a PCI link. A lot of the existing PCI infrastructure is reused:
devices are scanned and BARs are assigned during the standard PCI
enumeration. Commands like 'lspci' can therefore be used to see what
devices are available.
The configuration space defines the AFU(s) that can be found on the
physical adapter, such as its name, how many memory contexts it can
work with, the size of its MMIO areas, ...
MMIO
====
OpenCAPI defines two MMIO areas for each AFU:
* the global MMIO area, with registers pertinent to the whole AFU.
* a per-process MMIO area, which has a fixed size for each context.
AFU interrupts
==============
OpenCAPI includes the possibility for an AFU to send an interrupt to a
host process. It is done through a 'intrp_req' defined in the
Transaction Layer, specifying a 64-bit object handle which defines the
interrupt.
The driver allows a process to allocate an interrupt and obtain its
64-bit object handle, that can be passed to the AFU.
char devices
============
The driver creates one char device per AFU found on the physical
device. A physical device may have multiple functions and each
function can have multiple AFUs. At the time of this writing though,
it has only been tested with devices exporting only one AFU.
Char devices can be found in /dev/ocxl/ and are named as:
/dev/ocxl/<AFU name>.<location>.<index>
where <AFU name> is a max 20-character long name, as found in the
config space of the AFU.
<location> is added by the driver and can help distinguish devices
when a system has more than one instance of the same OpenCAPI device.
<index> is also to help distinguish AFUs in the unlikely case where a
device carries multiple copies of the same AFU.
Sysfs class
===========
An ocxl class is added for the devices representing the AFUs. See
/sys/class/ocxl. The layout is described in
Documentation/ABI/testing/sysfs-class-ocxl
User API
========
open
----
Based on the AFU definition found in the config space, an AFU may
support working with more than one memory context, in which case the
associated char device may be opened multiple times by different
processes.
ioctl
-----
OCXL_IOCTL_ATTACH:
Attach the memory context of the calling process to the AFU so that
the AFU can access its memory.
OCXL_IOCTL_IRQ_ALLOC:
Allocate an AFU interrupt and return an identifier.
OCXL_IOCTL_IRQ_FREE:
Free a previously allocated AFU interrupt.
OCXL_IOCTL_IRQ_SET_FD:
Associate an event fd to an AFU interrupt so that the user process
can be notified when the AFU sends an interrupt.
mmap
----
A process can mmap the per-process MMIO area for interactions with the
AFU.
......@@ -326,6 +326,7 @@ Code Seq#(hex) Include File Comments
0xB5 00-0F uapi/linux/rpmsg.h <mailto:linux-remoteproc@vger.kernel.org>
0xC0 00-0F linux/usb/iowarrior.h
0xCA 00-0F uapi/misc/cxl.h
0xCA 10-2F uapi/misc/ocxl.h
0xCA 80-BF uapi/scsi/cxlflash_ioctl.h
0xCB 00-1F CBM serial IEC bus in development:
<mailto:michael.klein@puffin.lb.shuttle.de>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment