drm/i915/dp: use readb and writeb calls for single byte DPCD access

This is what we have the readb and writeb variants for. Do some minor
return value and variable cleanup while at it.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fd8a8f110bcfdc73a8c9241e5f9d61f7dd7c9677.1491485983.git.jani.nikula@intel.com

drivers/gpu/drm/i915/intel_dp.c

@@ -3661,9 +3661,9 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
 		uint8_t frame_sync_cap;
 
 		dev_priv->psr.sink_support = true;
-		drm_dp_dpcd_read(&intel_dp->aux,
+		drm_dp_dpcd_readb(&intel_dp->aux,
 				  DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
-				 &frame_sync_cap, 1);
+				  &frame_sync_cap);
 		dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
 		/* PSR2 needs frame sync as well */
 		dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
@@ -3737,8 +3737,8 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 		intel_dp_set_common_rates(intel_dp);
 	}
 
-	if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT,
-			     &intel_dp->sink_count, 1) < 0)
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_SINK_COUNT,
+			      &intel_dp->sink_count) <= 0)
 		return false;
 
 	/*
@@ -3775,7 +3775,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 static bool
 intel_dp_can_mst(struct intel_dp *intel_dp)
 {
-	u8 buf[1];
+	u8 mstm_cap;
 
 	if (!i915.enable_dp_mst)
 		return false;
@@ -3786,10 +3786,10 @@ intel_dp_can_mst(struct intel_dp *intel_dp)
 	if (intel_dp->dpcd[DP_DPCD_REV] < 0x12)
 		return false;
 
-	if (drm_dp_dpcd_read(&intel_dp->aux, DP_MSTM_CAP, buf, 1) != 1)
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_MSTM_CAP, &mstm_cap) != 1)
 		return false;
 
-	return buf[0] & DP_MST_CAP;
+	return mstm_cap & DP_MST_CAP;
 }
 
 static void
@@ -3935,9 +3935,8 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
 static bool
 intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
 {
-	return drm_dp_dpcd_read(&intel_dp->aux,
-				       DP_DEVICE_SERVICE_IRQ_VECTOR,
-				       sink_irq_vector, 1) == 1;
+	return drm_dp_dpcd_readb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR,
+				 sink_irq_vector) == 1;
 }
 
 static bool
@@ -4000,13 +3999,13 @@ static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 {
 	uint8_t test_pattern;
-	uint16_t test_misc;
+	uint8_t test_misc;
 	__be16 h_width, v_height;
 	int status = 0;
 
 	/* Read the TEST_PATTERN (DP CTS 3.1.5) */
-	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_PATTERN,
-				  &test_pattern, 1);
+	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_PATTERN,
+				   &test_pattern);
 	if (status <= 0) {
 		DRM_DEBUG_KMS("Test pattern read failed\n");
 		return DP_TEST_NAK;
@@ -4028,8 +4027,8 @@ static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 		return DP_TEST_NAK;
 	}
 
-	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_MISC0,
-				  &test_misc, 1);
+	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_MISC0,
+				   &test_misc);
 	if (status <= 0) {
 		DRM_DEBUG_KMS("TEST MISC read failed\n");
 		return DP_TEST_NAK;
@@ -4088,10 +4087,8 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 		 */
 		block += intel_connector->detect_edid->extensions;
 
-		if (!drm_dp_dpcd_write(&intel_dp->aux,
-					DP_TEST_EDID_CHECKSUM,
-					&block->checksum,
-					1))
+		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_EDID_CHECKSUM,
+				       block->checksum) <= 0)
 			DRM_DEBUG_KMS("Failed to write EDID checksum\n");
 
 		test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;