Merge tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.9-rc1

Adds support for one more panel to the simple-panel driver, fixes up a
couple of delays and flags for existing panels and finally adds a new
driver for the DSI panel found on Nexus 7 devices.

* tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel
  dt-bindings: Add JDI LT070ME05000 panel bindings
  drm/panel: simple: Fix bus_format for the Olimex LCD-OLinuXino-4.3TS
  drm/panel: simple-panel: Add delay timings for Starry KR122EA0SRA
  drm/panel: simple: Fix bus flags for Ortustech com43h4m85ulc
  drm/panel: simple: Add Innolux G101ICE-L01 panel
  drm/panel: simple: Add delay timing for Sharp LQ123P1JX31
  drm/dsi: Implement DCS set/get display brightness
  drm/dsi: Order DCS helpers by command code

Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt

+Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
+
+Required properties:
+- compatible: should be "innolux,g101ice-l01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt

+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply (3-5V)
+- iovcc-supply: phandle of the regulator that provides the supply voltage
+  IOVCC , power supply for LCM (1.8V)
+- enable-gpios: phandle of gpio for enable line
+  LED_EN, LED backlight enable, High active
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+  XRES, Reset, Low active
+- dcdc-en-gpios: phandle of the gpio for power ic line
+  Power IC supply enable, High active
+
+Example:
+
+	dsi0: qcom,mdss_dsi@4700000 {
+		panel@0 {
+			compatible = "jdi,lt070me05000";
+			reg = <0>;
+
+			vddp-supply = <&pm8921_l17>;
+			iovcc-supply = <&pm8921_lvs7>;
+
+			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+			dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+		};
+	};

drivers/gpu/drm/drm_mipi_dsi.c

@@ -998,6 +998,27 @@ int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
 }
 EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
 
+/**
+ * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
+ *    data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
+				 sizeof(format));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
+
 /**
  * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
  *    the Tearing Effect output signal of the display module
@@ -1021,25 +1042,53 @@ int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
 EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
 
 /**
- * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
- *    data used by the interface
+ * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the
+ *    display
  * @dsi: DSI peripheral device
- * @format: pixel format
+ * @brightness: brightness value
  *
  * Return: 0 on success or a negative error code on failure.
  */
-int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
+int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
+					u16 brightness)
 {
+	u8 payload[2] = { brightness & 0xff, brightness >> 8 };
 	ssize_t err;
 
-	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
-				 sizeof(format));
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+				 payload, sizeof(payload));
 	if (err < 0)
 		return err;
 
 	return 0;
 }
-EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness);
+
+/**
+ * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value
+ *    of the display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
+					u16 *brightness)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
+				brightness, sizeof(*brightness));
+	if (err <= 0) {
+		if (err == 0)
+			err = -ENODATA;
+
+		return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness);
 
 static int mipi_dsi_drv_probe(struct device *dev)
 {

drivers/gpu/drm/panel/Kconfig

@@ -18,6 +18,17 @@ config DRM_PANEL_SIMPLE
 	  that it can be automatically turned off when the panel goes into a
 	  low power state.
 
+config DRM_PANEL_JDI_LT070ME05000
+	tristate "JDI LT070ME05000 WUXGA DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for JDI DSI video mode
+	  panel as found in Google Nexus 7 (2013) devices.
+	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
+	  24 bit per pixel.
+
 config DRM_PANEL_SAMSUNG_LD9040
 	tristate "Samsung LD9040 RGB/SPI panel"
 	depends on OF && SPI

drivers/gpu/drm/panel/Makefile

 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
+obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o

drivers/gpu/drm/panel/panel-jdi-lt070me05000.c

+/*
+ * Copyright (C) 2016 InforceComputing
+ * Author: Vinay Simha BN <simhavcs@gmail.com>
+ *
+ * Copyright (C) 2016 Linaro Ltd
+ * Author: Sumit Semwal <sumit.semwal@linaro.org>
+ *
+ * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a
+ * JDI model LT070ME05000, and its data sheet is at:
+ * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+static const char * const regulator_names[] = {
+	"vddp",
+	"iovcc"
+};
+
+struct jdi_panel {
+	struct drm_panel base;
+	struct mipi_dsi_device *dsi;
+
+	struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
+
+	struct gpio_desc *enable_gpio;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *dcdc_en_gpio;
+	struct backlight_device *backlight;
+
+	bool prepared;
+	bool enabled;
+
+	const struct drm_display_mode *mode;
+};
+
+static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct jdi_panel, base);
+}
+
+static int jdi_panel_init(struct jdi_panel *jdi)
+{
+	struct mipi_dsi_device *dsi = jdi->dsi;
+	struct device *dev = &jdi->dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_soft_reset(dsi);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(10000, 20000);
+
+	ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT << 4);
+	if (ret < 0) {
+		dev_err(dev, "failed to set pixel format: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_column_address(dsi, 0, jdi->mode->hdisplay - 1);
+	if (ret < 0) {
+		dev_err(dev, "failed to set column address: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_page_address(dsi, 0, jdi->mode->vdisplay - 1);
+	if (ret < 0) {
+		dev_err(dev, "failed to set page address: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * BIT(5) BCTRL = 1 Backlight Control Block On, Brightness registers
+	 *                  are active
+	 * BIT(3) BL = 1    Backlight Control On
+	 * BIT(2) DD = 0    Display Dimming is Off
+	 */
+	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+				 (u8[]){ 0x24 }, 1);
+	if (ret < 0) {
+		dev_err(dev, "failed to write control display: %d\n", ret);
+		return ret;
+	}
+
+	/* CABC off */
+	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_POWER_SAVE,
+				 (u8[]){ 0x00 }, 1);
+	if (ret < 0) {
+		dev_err(dev, "failed to set cabc off: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "failed to set exit sleep mode: %d\n", ret);
+		return ret;
+	}
+
+	msleep(120);
+
+	ret = mipi_dsi_generic_write(dsi, (u8[]){0xB0, 0x00}, 2);
+	if (ret < 0) {
+		dev_err(dev, "failed to set mcap: %d\n", ret);
+		return ret;
+	}
+
+	mdelay(10);
+
+	/* Interface setting, video mode */
+	ret = mipi_dsi_generic_write(dsi, (u8[])
+				     {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}, 6);
+	if (ret < 0) {
+		dev_err(dev, "failed to set display interface setting: %d\n"
+			, ret);
+		return ret;
+	}
+
+	mdelay(20);
+
+	ret = mipi_dsi_generic_write(dsi, (u8[]){0xB0, 0x03}, 2);
+	if (ret < 0) {
+		dev_err(dev, "failed to set default values for mcap: %d\n"
+			, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int jdi_panel_on(struct jdi_panel *jdi)
+{
+	struct mipi_dsi_device *dsi = jdi->dsi;
+	struct device *dev = &jdi->dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0)
+		dev_err(dev, "failed to set display on: %d\n", ret);
+
+	return ret;
+}
+
+static void jdi_panel_off(struct jdi_panel *jdi)
+{
+	struct mipi_dsi_device *dsi = jdi->dsi;
+	struct device *dev = &jdi->dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		dev_err(dev, "failed to set display off: %d\n", ret);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		dev_err(dev, "failed to enter sleep mode: %d\n", ret);
+
+	msleep(100);
+}
+
+static int jdi_panel_disable(struct drm_panel *panel)
+{
+	struct jdi_panel *jdi = to_jdi_panel(panel);
+
+	if (!jdi->enabled)
+		return 0;
+
+	jdi->backlight->props.power = FB_BLANK_POWERDOWN;
+	backlight_update_status(jdi->backlight);
+
+	jdi->enabled = false;
+
+	return 0;
+}
+
+static int jdi_panel_unprepare(struct drm_panel *panel)
+{
+	struct jdi_panel *jdi = to_jdi_panel(panel);
+	struct device *dev = &jdi->dsi->dev;
+	int ret;
+
+	if (!jdi->prepared)
+		return 0;
+
+	jdi_panel_off(jdi);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(jdi->supplies), jdi->supplies);
+	if (ret < 0)
+		dev_err(dev, "regulator disable failed, %d\n", ret);
+
+	gpiod_set_value(jdi->enable_gpio, 0);
+
+	gpiod_set_value(jdi->reset_gpio, 1);
+
+	gpiod_set_value(jdi->dcdc_en_gpio, 0);
+
+	jdi->prepared = false;
+
+	return 0;
+}
+
+static int jdi_panel_prepare(struct drm_panel *panel)
+{
+	struct jdi_panel *jdi = to_jdi_panel(panel);
+	struct device *dev = &jdi->dsi->dev;
+	int ret;
+
+	if (jdi->prepared)
+		return 0;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(jdi->supplies), jdi->supplies);
+	if (ret < 0) {
+		dev_err(dev, "regulator enable failed, %d\n", ret);
+		return ret;
+	}
+
+	msleep(20);
+
+	gpiod_set_value(jdi->dcdc_en_gpio, 1);
+	usleep_range(10, 20);
+
+	gpiod_set_value(jdi->reset_gpio, 0);
+	usleep_range(10, 20);
+
+	gpiod_set_value(jdi->enable_gpio, 1);
+	usleep_range(10, 20);
+
+	ret = jdi_panel_init(jdi);
+	if (ret < 0) {
+		dev_err(dev, "failed to init panel: %d\n", ret);
+		goto poweroff;
+	}
+
+	ret = jdi_panel_on(jdi);
+	if (ret < 0) {
+		dev_err(dev, "failed to set panel on: %d\n", ret);
+		goto poweroff;
+	}
+
+	jdi->prepared = true;
+
+	return 0;
+
+poweroff:
+	ret = regulator_bulk_disable(ARRAY_SIZE(jdi->supplies), jdi->supplies);
+	if (ret < 0)
+		dev_err(dev, "regulator disable failed, %d\n", ret);
+
+	gpiod_set_value(jdi->enable_gpio, 0);
+
+	gpiod_set_value(jdi->reset_gpio, 1);
+
+	gpiod_set_value(jdi->dcdc_en_gpio, 0);
+
+	return ret;
+}
+
+static int jdi_panel_enable(struct drm_panel *panel)
+{
+	struct jdi_panel *jdi = to_jdi_panel(panel);
+
+	if (jdi->enabled)
+		return 0;
+
+	jdi->backlight->props.power = FB_BLANK_UNBLANK;
+	backlight_update_status(jdi->backlight);
+
+	jdi->enabled = true;
+
+	return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+		.clock = 155493,
+		.hdisplay = 1200,
+		.hsync_start = 1200 + 48,
+		.hsync_end = 1200 + 48 + 32,
+		.htotal = 1200 + 48 + 32 + 60,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 3,
+		.vsync_end = 1920 + 3 + 5,
+		.vtotal = 1920 + 3 + 5 + 6,
+		.vrefresh = 60,
+		.flags = 0,
+};
+
+static int jdi_panel_get_modes(struct drm_panel *panel)
+{
+	struct drm_display_mode *mode;
+	struct jdi_panel *jdi = to_jdi_panel(panel);
+	struct device *dev = &jdi->dsi->dev;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		dev_err(dev, "failed to add mode %ux%ux@%u\n",
+			default_mode.hdisplay, default_mode.vdisplay,
+			default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	drm_mode_probed_add(panel->connector, mode);
+
+	panel->connector->display_info.width_mm = 95;
+	panel->connector->display_info.height_mm = 151;
+
+	return 1;
+}
+
+static int dsi_dcs_bl_get_brightness(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	int ret;
+	u16 brightness = bl->props.brightness;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return brightness & 0xff;
+}
+
+static int dsi_dcs_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static const struct backlight_ops dsi_bl_ops = {
+	.update_status = dsi_dcs_bl_update_status,
+	.get_brightness = dsi_dcs_bl_get_brightness,
+};
+
+static struct backlight_device *
+drm_panel_create_dsi_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.brightness = 255;
+	props.max_brightness = 255;
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &dsi_bl_ops, &props);
+}
+
+static const struct drm_panel_funcs jdi_panel_funcs = {
+	.disable = jdi_panel_disable,
+	.unprepare = jdi_panel_unprepare,
+	.prepare = jdi_panel_prepare,
+	.enable = jdi_panel_enable,
+	.get_modes = jdi_panel_get_modes,
+};
+
+static const struct of_device_id jdi_of_match[] = {
+	{ .compatible = "jdi,lt070me05000", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, jdi_of_match);
+
+static int jdi_panel_add(struct jdi_panel *jdi)
+{
+	struct device *dev = &jdi->dsi->dev;
+	int ret;
+	unsigned int i;
+
+	jdi->mode = &default_mode;
+
+	for (i = 0; i < ARRAY_SIZE(jdi->supplies); i++)
+		jdi->supplies[i].supply = regulator_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(jdi->supplies),
+				      jdi->supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to init regulator, ret=%d\n", ret);
+		return ret;
+	}
+
+	jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(jdi->enable_gpio)) {
+		ret = PTR_ERR(jdi->enable_gpio);
+		dev_err(dev, "cannot get enable-gpio %d\n", ret);
+		return ret;
+	}
+
+	jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(jdi->reset_gpio)) {
+		ret = PTR_ERR(jdi->reset_gpio);
+		dev_err(dev, "cannot get reset-gpios %d\n", ret);
+		return ret;
+	}
+
+	jdi->dcdc_en_gpio = devm_gpiod_get(dev, "dcdc-en", GPIOD_OUT_LOW);
+	if (IS_ERR(jdi->dcdc_en_gpio)) {
+		ret = PTR_ERR(jdi->dcdc_en_gpio);
+		dev_err(dev, "cannot get dcdc-en-gpio %d\n", ret);
+		return ret;
+	}
+
+	jdi->backlight = drm_panel_create_dsi_backlight(jdi->dsi);
+	if (IS_ERR(jdi->backlight)) {
+		ret = PTR_ERR(jdi->backlight);
+		dev_err(dev, "failed to register backlight %d\n", ret);
+		return ret;
+	}
+
+	drm_panel_init(&jdi->base);
+	jdi->base.funcs = &jdi_panel_funcs;
+	jdi->base.dev = &jdi->dsi->dev;
+
+	ret = drm_panel_add(&jdi->base);
+
+	return ret;
+}
+
+static void jdi_panel_del(struct jdi_panel *jdi)
+{
+	if (jdi->base.dev)
+		drm_panel_remove(&jdi->base);
+}
+
+static int jdi_panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct jdi_panel *jdi;
+	int ret;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags =  MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO |
+			   MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	jdi = devm_kzalloc(&dsi->dev, sizeof(*jdi), GFP_KERNEL);
+	if (!jdi)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, jdi);
+
+	jdi->dsi = dsi;
+
+	ret = jdi_panel_add(jdi);
+	if (ret < 0)
+		return ret;
+
+	return mipi_dsi_attach(dsi);
+}
+
+static int jdi_panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = jdi_panel_disable(&jdi->base);
+	if (ret < 0)
+		dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n",
+			ret);
+
+	drm_panel_detach(&jdi->base);
+	jdi_panel_del(jdi);
+
+	return 0;
+}
+
+static void jdi_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi);
+
+	jdi_panel_disable(&jdi->base);
+}
+
+static struct mipi_dsi_driver jdi_panel_driver = {
+	.driver = {
+		.name = "panel-jdi-lt070me05000",
+		.of_match_table = jdi_of_match,
+	},
+	.probe = jdi_panel_probe,
+	.remove = jdi_panel_remove,
+	.shutdown = jdi_panel_shutdown,
+};
+module_mipi_dsi_driver(jdi_panel_driver);
+
+MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
+MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>");
+MODULE_DESCRIPTION("JDI LT070ME05000 WUXGA");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/panel/panel-simple.c

@@ -849,6 +849,34 @@ static const struct panel_desc innolux_at070tn92 = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };
 
+static const struct display_timing innolux_g101ice_l01_timing = {
+	.pixelclock = { 60400000, 71100000, 74700000 },
+	.hactive = { 1280, 1280, 1280 },
+	.hfront_porch = { 41, 80, 100 },
+	.hback_porch = { 40, 79, 99 },
+	.hsync_len = { 1, 1, 1 },
+	.vactive = { 800, 800, 800 },
+	.vfront_porch = { 5, 11, 14 },
+	.vback_porch = { 4, 11, 14 },
+	.vsync_len = { 1, 1, 1 },
+	.flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc innolux_g101ice_l01 = {
+	.timings = &innolux_g101ice_l01_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 217,
+		.height = 135,
+	},
+	.delay = {
+		.enable = 200,
+		.disable = 200,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+};
+
 static const struct drm_display_mode innolux_g121i1_l01_mode = {
 	.clock = 71000,
 	.hdisplay = 1280,
@@ -1186,7 +1214,7 @@ static const struct panel_desc olimex_lcd_olinuxino_43ts = {
 		.width = 105,
 		.height = 67,
 	},
-	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };
 
 /*
@@ -1245,6 +1273,7 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
 		.height = 93,
 	},
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
 };
 
 static const struct drm_display_mode qd43003c0_40_mode = {
@@ -1384,6 +1413,11 @@ static const struct panel_desc sharp_lq123p1jx31 = {
 		.width = 259,
 		.height = 173,
 	},
+	.delay = {
+		.prepare = 110,
+		.enable = 50,
+		.unprepare = 550,
+	},
 };
 
 static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
@@ -1430,6 +1464,11 @@ static const struct panel_desc starry_kr122ea0sra = {
 		.width = 263,
 		.height = 164,
 	},
+	.delay = {
+		.prepare = 10 + 200,
+		.enable = 50,
+		.unprepare = 10 + 500,
+	},
 };
 
 static const struct drm_display_mode tpk_f07a_0102_mode = {
@@ -1574,6 +1613,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "innolux,at070tn92",
 		.data = &innolux_at070tn92,
+	}, {
+		.compatible ="innolux,g101ice-l01",
+		.data = &innolux_g101ice_l01
 	}, {
 		.compatible ="innolux,g121i1-l01",
 		.data = &innolux_g121i1_l01

include/drm/drm_mipi_dsi.h

@@ -265,11 +265,15 @@ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
 				    u16 end);
 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
 				  u16 end);
-int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
 			     enum mipi_dsi_dcs_tear_mode mode);
 int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
+int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
+int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
+					u16 brightness);
+int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
+					u16 *brightness);
 
 /**
  * struct mipi_dsi_driver - DSI driver