Commit 017aadc4 authored by Michael S. Tsirkin's avatar Michael S. Tsirkin Committed by Roland Dreier

IB/mthca: Enable MSI-X by default

Recover from MSI-X errors by automatically falling back on regular
interrupt, instead of asking the user to do this manually.  This makes
it possible to enable MSI-X by default, and will make it possible to
get rid of the msi_x module option in the future.
Signed-off-by: default avatarMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
parent 08fb1055
......@@ -61,7 +61,7 @@ MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0");
#ifdef CONFIG_PCI_MSI
static int msi_x = 0;
static int msi_x = 1;
module_param(msi_x, int, 0444);
MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero");
......@@ -833,14 +833,19 @@ static int mthca_setup_hca(struct mthca_dev *dev)
err = mthca_NOP(dev, &status);
if (err || status) {
mthca_err(dev, "NOP command failed to generate interrupt (IRQ %d), aborting.\n",
if (dev->mthca_flags & (MTHCA_FLAG_MSI | MTHCA_FLAG_MSI_X)) {
mthca_warn(dev, "NOP command failed to generate interrupt "
"(IRQ %d).\n",
dev->mthca_flags & MTHCA_FLAG_MSI_X ?
dev->eq_table.eq[MTHCA_EQ_CMD].msi_x_vector :
dev->pdev->irq);
if (dev->mthca_flags & (MTHCA_FLAG_MSI | MTHCA_FLAG_MSI_X))
mthca_err(dev, "Try again with MSI/MSI-X disabled.\n");
else
mthca_warn(dev, "Trying again with MSI/MSI-X disabled.\n");
} else {
mthca_err(dev, "NOP command failed to generate interrupt "
"(IRQ %d), aborting.\n",
dev->pdev->irq);
mthca_err(dev, "BIOS or ACPI interrupt routing problem?\n");
}
goto err_cmd_poll;
}
......@@ -1115,24 +1120,6 @@ static int __mthca_init_one(struct pci_dev *pdev, int hca_type)
goto err_free_dev;
}
if (msi_x && !mthca_enable_msi_x(mdev))
mdev->mthca_flags |= MTHCA_FLAG_MSI_X;
else if (msi) {
static int warned;
if (!warned) {
printk(KERN_WARNING PFX "WARNING: MSI support will be "
"removed from the ib_mthca driver in January 2008.\n");
printk(KERN_WARNING " If you are using MSI and cannot "
"switch to MSI-X, please tell "
"<general@lists.openfabrics.org>.\n");
++warned;
}
if (!pci_enable_msi(pdev))
mdev->mthca_flags |= MTHCA_FLAG_MSI;
}
if (mthca_cmd_init(mdev)) {
mthca_err(mdev, "Failed to init command interface, aborting.\n");
goto err_free_dev;
......@@ -1156,7 +1143,35 @@ static int __mthca_init_one(struct pci_dev *pdev, int hca_type)
mthca_warn(mdev, "If you have problems, try updating your HCA FW.\n");
}
if (msi_x && !mthca_enable_msi_x(mdev))
mdev->mthca_flags |= MTHCA_FLAG_MSI_X;
else if (msi) {
static int warned;
if (!warned) {
printk(KERN_WARNING PFX "WARNING: MSI support will be "
"removed from the ib_mthca driver in January 2008.\n");
printk(KERN_WARNING " If you are using MSI and cannot "
"switch to MSI-X, please tell "
"<general@lists.openfabrics.org>.\n");
++warned;
}
if (!pci_enable_msi(pdev))
mdev->mthca_flags |= MTHCA_FLAG_MSI;
}
err = mthca_setup_hca(mdev);
if (err == -EBUSY && (mdev->mthca_flags & (MTHCA_FLAG_MSI | MTHCA_FLAG_MSI_X))) {
if (mdev->mthca_flags & MTHCA_FLAG_MSI_X)
pci_disable_msix(pdev);
if (mdev->mthca_flags & MTHCA_FLAG_MSI)
pci_disable_msi(pdev);
mdev->mthca_flags &= ~(MTHCA_FLAG_MSI_X | MTHCA_FLAG_MSI);
err = mthca_setup_hca(mdev);
}
if (err)
goto err_close;
......@@ -1192,17 +1207,17 @@ static int __mthca_init_one(struct pci_dev *pdev, int hca_type)
mthca_cleanup_uar_table(mdev);
err_close:
if (mdev->mthca_flags & MTHCA_FLAG_MSI_X)
pci_disable_msix(pdev);
if (mdev->mthca_flags & MTHCA_FLAG_MSI)
pci_disable_msi(pdev);
mthca_close_hca(mdev);
err_cmd:
mthca_cmd_cleanup(mdev);
err_free_dev:
if (mdev->mthca_flags & MTHCA_FLAG_MSI_X)
pci_disable_msix(pdev);
if (mdev->mthca_flags & MTHCA_FLAG_MSI)
pci_disable_msi(pdev);
ib_dealloc_device(&mdev->ib_dev);
err_free_res:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment