Commit 0209f649 authored by Paul E. McKenney's avatar Paul E. McKenney

rcu: limit rcu_node leaf-level fanout

Some recent benchmarks have indicated possible lock contention on the
leaf-level rcu_node locks.  This commit therefore limits the number of
CPUs per leaf-level rcu_node structure to 16, in other words, there
can be at most 16 rcu_data structures fanning into a given rcu_node
structure.  Prior to this, the limit was 32 on 32-bit systems and 64 on
64-bit systems.

Note that the fanout of non-leaf rcu_node structures is unchanged.  The
organization of accesses to the rcu_node tree is such that references
to non-leaf rcu_node structures are much less frequent than to the
leaf structures.
Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
parent 121dfc4b
......@@ -1869,8 +1869,9 @@ static void __init rcu_init_levelspread(struct rcu_state *rsp)
{
int i;
for (i = NUM_RCU_LVLS - 1; i >= 0; i--)
for (i = NUM_RCU_LVLS - 1; i > 0; i--)
rsp->levelspread[i] = CONFIG_RCU_FANOUT;
rsp->levelspread[0] = RCU_FANOUT_LEAF;
}
#else /* #ifdef CONFIG_RCU_FANOUT_EXACT */
static void __init rcu_init_levelspread(struct rcu_state *rsp)
......
......@@ -31,46 +31,51 @@
/*
* Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT.
* In theory, it should be possible to add more levels straightforwardly.
* In practice, this has not been tested, so there is probably some
* bug somewhere.
* In practice, this did work well going from three levels to four.
* Of course, your mileage may vary.
*/
#define MAX_RCU_LVLS 4
#define RCU_FANOUT (CONFIG_RCU_FANOUT)
#define RCU_FANOUT_SQ (RCU_FANOUT * RCU_FANOUT)
#define RCU_FANOUT_CUBE (RCU_FANOUT_SQ * RCU_FANOUT)
#define RCU_FANOUT_FOURTH (RCU_FANOUT_CUBE * RCU_FANOUT)
#if NR_CPUS <= RCU_FANOUT
#if CONFIG_RCU_FANOUT > 16
#define RCU_FANOUT_LEAF 16
#else /* #if CONFIG_RCU_FANOUT > 16 */
#define RCU_FANOUT_LEAF (CONFIG_RCU_FANOUT)
#endif /* #else #if CONFIG_RCU_FANOUT > 16 */
#define RCU_FANOUT_1 (RCU_FANOUT_LEAF)
#define RCU_FANOUT_2 (RCU_FANOUT_1 * CONFIG_RCU_FANOUT)
#define RCU_FANOUT_3 (RCU_FANOUT_2 * CONFIG_RCU_FANOUT)
#define RCU_FANOUT_4 (RCU_FANOUT_3 * CONFIG_RCU_FANOUT)
#if NR_CPUS <= RCU_FANOUT_1
# define NUM_RCU_LVLS 1
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 (NR_CPUS)
# define NUM_RCU_LVL_2 0
# define NUM_RCU_LVL_3 0
# define NUM_RCU_LVL_4 0
#elif NR_CPUS <= RCU_FANOUT_SQ
#elif NR_CPUS <= RCU_FANOUT_2
# define NUM_RCU_LVLS 2
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_2 (NR_CPUS)
# define NUM_RCU_LVL_3 0
# define NUM_RCU_LVL_4 0
#elif NR_CPUS <= RCU_FANOUT_CUBE
#elif NR_CPUS <= RCU_FANOUT_3
# define NUM_RCU_LVLS 3
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
# define NUM_RCU_LVL_3 NR_CPUS
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_3 (NR_CPUS)
# define NUM_RCU_LVL_4 0
#elif NR_CPUS <= RCU_FANOUT_FOURTH
#elif NR_CPUS <= RCU_FANOUT_4
# define NUM_RCU_LVLS 4
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_CUBE)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
# define NUM_RCU_LVL_3 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
# define NUM_RCU_LVL_4 NR_CPUS
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_3)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
# define NUM_RCU_LVL_3 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_4 (NR_CPUS)
#else
# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
#endif /* #if (NR_CPUS) <= RCU_FANOUT */
#endif /* #if (NR_CPUS) <= RCU_FANOUT_1 */
#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3 + NUM_RCU_LVL_4)
#define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment