[PATCH] fix m68knommu COMEM-lite PCI bios code

This patch fixes up a lot of problems in the m68knommu architecture
CO-MEMlite PCI interface code. The code was seriously out of date,
not implementing many of the requried PCI bios support functions.
Also fixes many wrong function return types and arguments.

arch/m68knommu/kernel/comempci.c

@@ -3,7 +3,7 @@
 /*
  *	comemlite.c -- PCI access code for embedded CO-MEM Lite PCI controller.
  *
- *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com).
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com).
  *	(C) Copyright 2000, Lineo (www.lineo.com)
  */
 
@@ -60,8 +60,8 @@ unsigned long	pci_slotmask = 0;
  *	really assign any resources we like to devices, as long as
  *	they do not clash with other PCI devices.
  */
-unsigned int	pci_iobase = 0x100;		/* Arbitary start address */
-unsigned int	pci_membase = 0x00010000;	/* Arbitary start address */
+unsigned int	pci_iobase = PCIBIOS_MIN_IO;	/* Arbitary start address */
+unsigned int	pci_membase = PCIBIOS_MIN_MEM;	/* Arbitary start address */
 
 #define	PCI_MINIO	0x100			/* 256 byte minimum I/O */
 #define	PCI_MINMEM	0x00010000		/* 64k minimum chunk */
@@ -105,7 +105,7 @@ void pci_resetbus(void)
 
 /*****************************************************************************/
 
-int pcibios_assignres(int slot)
+int pcibios_assign_resource_slot(int slot)
 {
 	volatile unsigned long	*rp;
 	volatile unsigned char	*ip;
@@ -113,7 +113,7 @@ int pcibios_assignres(int slot)
 	int			bar;
 
 #ifdef DEBUGPCI
-	printk("pcibios_assignres(slot=%x)\n", slot);
+	printk("pcibios_assign_resource_slot(slot=%x)\n", slot);
 #endif
 
 	rp = (volatile unsigned long *) COMEM_BASE;
@@ -224,7 +224,7 @@ int pcibios_assignres(int slot)
 
 /*****************************************************************************/
 
-int pcibios_enable(int slot)
+int pcibios_enable_slot(int slot)
 {
 	volatile unsigned long	*rp;
 	volatile unsigned short	*wp;
@@ -232,7 +232,7 @@ int pcibios_enable(int slot)
 	unsigned short		cmd;
 
 #ifdef DEBUGPCI
-	printk("pcibios_enbale(slot=%x)\n", slot);
+	printk("pcibios_enbale_slot(slot=%x)\n", slot);
 #endif
 
 	rp = (volatile unsigned long *) COMEM_BASE;
@@ -256,7 +256,34 @@ int pcibios_enable(int slot)
 
 /*****************************************************************************/
 
-unsigned long pcibios_init(unsigned long mem_start, unsigned long mem_end)
+void pcibios_assign_resources(void)
+{
+	volatile unsigned long	*rp;
+	unsigned long		sel, id;
+	int			slot;
+
+	rp = (volatile unsigned long *) COMEM_BASE;
+
+	/*
+	 *	Do a quick scan of the PCI bus and see what is here.
+	 */
+	for (slot = COMEM_MINDEV; (slot <= COMEM_MAXDEV); slot++) {
+		sel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << (slot + 16));
+		rp[LREG(COMEM_DAHBASE)] = sel;
+		rp[LREG(COMEM_PCIBUS)] = 0; /* Clear bus */
+		id = rp[LREG(COMEM_PCIBUS)];
+		if ((id != 0) && ((id & 0xffff0000) != (sel & 0xffff0000))) {
+			printk("PCI: slot=%d id=%08x\n", slot, (int) id);
+			pci_slotmask |= 0x1 << slot;
+			pcibios_assign_resource_slot(slot);
+			pcibios_enable_slot(slot);
+		}
+	}
+}
+
+/*****************************************************************************/
+
+int pcibios_init(void)
 {
 	volatile unsigned long	*rp;
 	unsigned long		sel, id;
@@ -276,7 +303,7 @@ unsigned long pcibios_init(unsigned long mem_start, unsigned long mem_end)
 	rp = (volatile unsigned long *) COMEM_BASE;
 	if ((rp[LREG(COMEM_LBUSCFG)] & 0xff) != 0x50) {
 		printk("PCI: no PCI bus present\n");
-		return(mem_start);
+		return(0);
 	}
 
 #ifdef COMEM_BRIDGEDEV
@@ -291,34 +318,18 @@ unsigned long pcibios_init(unsigned long mem_start, unsigned long mem_end)
 	id = rp[LREG(COMEM_PCIBUS)];
 	if ((id == 0) || ((id & 0xffff0000) == (sel & 0xffff0000))) {
 		printk("PCI: no PCI bus bridge present\n");
-		return(mem_start);
+		return(0);
 	}
 
 	printk("PCI: bridge device at slot=%d id=%08x\n", slot, (int) id);
 	pci_slotmask |= 0x1 << slot;
 	pci_shmemaddr = pci_membase;
-	pcibios_assignres(slot);
-	pcibios_enable(slot);
+	pcibios_assign_resource_slot(slot);
+	pcibios_enable_slot(slot);
 #endif
 
 	pci_bus_is_present = 1;
 
-	/*
-	 *	Do a quick scan of the PCI bus and see what is here.
-	 */
-	for (slot = COMEM_MINDEV; (slot <= COMEM_MAXDEV); slot++) {
-		sel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << (slot + 16));
-		rp[LREG(COMEM_DAHBASE)] = sel;
-		rp[LREG(COMEM_PCIBUS)] = 0; /* Clear bus */
-		id = rp[LREG(COMEM_PCIBUS)];
-		if ((id != 0) && ((id & 0xffff0000) != (sel & 0xffff0000))) {
-			printk("PCI: slot=%d id=%08x\n", slot, (int) id);
-			pci_slotmask |= 0x1 << slot;
-			pcibios_assignres(slot);
-			pcibios_enable(slot);
-		}
-	}
-
 	/* Get PCI irq for local vectoring */
 	if (request_irq(COMEM_IRQ, pci_interrupt, 0, "PCI bridge", NULL)) {
 		printk("PCI: failed to acquire interrupt %d\n", COMEM_IRQ);
@@ -326,16 +337,53 @@ unsigned long pcibios_init(unsigned long mem_start, unsigned long mem_end)
 		mcf_autovector(COMEM_IRQ);
 	}
 
-	return(mem_start);
+	pcibios_assign_resources();
+
+	return(0);
+}
+
+/*****************************************************************************/
+
+char *pcibios_setup(char *option)
+{
+	/* Nothing for us to handle. */
+	return(option);
+}
+/*****************************************************************************/
+
+struct pci_fixup pcibios_fixups[] = { { 0 } };
+
+void pcibios_fixup_bus(struct pci_bus *b)
+{
+}
+
+/*****************************************************************************/
+
+void pcibios_align_resource(void *data, struct resource *res, unsigned long size, unsigned long align)
+{
+}
+
+/*****************************************************************************/
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	int slot;
+
+	slot = PCI_SLOT(dev->devfn);
+	if ((dev->bus == 0) && (pci_slotmask & (1 << slot)))
+		pcibios_enable_slot(slot);
+	return(0);
 }
 
 /*****************************************************************************/
 
-unsigned long pcibios_fixup(unsigned long mem_start, unsigned long mem_end)
+void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *r, int resource)
 {
-	return(mem_start);
+	printk("%s(%d): no support for changing PCI resources...\n",
+		__FILE__, __LINE__);
 }
 
+
 /*****************************************************************************/
 
 /*
@@ -921,3 +969,23 @@ void pci_bmcpyfrom(void *dst, void *src, int len)
 }
 
 /*****************************************************************************/
+
+void *pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma_addr)
+{
+	void *mp;
+	if ((mp = pci_bmalloc(size)) != NULL) {
+		dma_addr = mp - (COMEM_BASE + COMEM_SHMEM);
+		return(mp);
+	}
+	*dma_addr = (dma_addr_t) NULL;
+	return(NULL);
+}
+
+/*****************************************************************************/
+
+void pci_free_consistent(struct pci_dev *dev, size_t size, void *cpu_addr, dma_addr_t dma_addr)
+{
+	pci_bmfree(cpu_addr, size);
+}
+
+/*****************************************************************************/